This patch adds SizeAdjustPolicy to QAbstractScrollArea.
If it is set to AdjustToContents it will make use of the new
protected viewportSizeHint() (BC since it was reserved in Qt5).
This function returns a suggested size based on contents.
Change-Id: I5d8aa517e88b8b21c5712e62b4d574c3aad99d3b
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
uic doesn't get compiled when -no-widgets is used, so disabling
its test.
Change-Id: I8c81ec468e40841548dacb356fd87ecf85d7b6ac
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
There is already an enum to disable SSL session tickets, which has been
used to disable session sharing for now. However, SSL session sharing
is not the same as SSL session tickets: Session sharing is built into
the SSL protocol, while session tickets is a TLS extension (RFC 5077).
Change-Id: If76b99c94b346cfb00e47366e66098f6334fd9bc
Reviewed-by: Richard J. Moore <rich@kde.org>
The signal needs to be emitted directly as the event is not passed to
the QLineEdit if the QSpinBox gets the Key_Return. Since this signal
may be relied upon then we ensure it is emitted directly.
Change-Id: I17cdec62c9f995bacfd7d3cc66d6324f26c84c67
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
An RTL menu containing a menu item which opens a submenu was showing
the wrong arrow if the application's direction was not also RTL.
So now the test for QTBUG-30595 can be simplified: no need to set
the application direction, and therefore less chance of failure.
Change-Id: Id140656206c6fefea3649289477dc54c77e2dd5e
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
Change-Id: I8174ca78b4e2d8b4344278acf8ca4b0db3115d1a
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
logicalDotsPerInchX returns qreal, and qreal in WEC7 is defined to
float instead double. There is no required overload:
qFuzzyCompare(float,double)
And for that reason build fails. Ensure qreal is casted to double which
is default type used by compilers for floating point literals such as
'96.0'.
Change-Id: I24c701715b3dcf1a2137256a1c251c19d0c1dbe9
Reviewed-by: Björn Breitmeyer <bjoern.breitmeyer@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
WEC7 does not have ws2_32 lib. The lib is needed for gethostname symbol,
instead of using hard coded platform specific libs,
rely on QMAKE_NETWORK_LIBS variable containing network libs.
Change-Id: Ice39ca3f2d176cc5df88beded4b64d2b92f4f3ba
Reviewed-by: Björn Breitmeyer <bjoern.breitmeyer@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Use Q_OS_WINCE ifdef in both method declaration and definition,
in addition combine QT_NO_PROCESS and Q_OS_WINCE ifdefs to one line.
Change-Id: I0787e4341c41b46a5fc089f24a538c0ad40a0875
Reviewed-by: Björn Breitmeyer <bjoern.breitmeyer@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Apparently testAllFunctions method has been changed to take pointer,
but code inside different WinCE defines was not updated.
Change-Id: Id15380ecc1e85650d679cb7437923ff9c77057ae
Reviewed-by: Björn Breitmeyer <bjoern.breitmeyer@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
WEC7 does not have time() function. Let's use Qt APIs to query time and
initialize random number generator, Qt APIs have already been adapted
to work on all supported platforms.
In addition use QByteArray instead of QString to avoid unnecessary type
conversions later on with toLatin1().
Change-Id: I1ae3729397b0f4a1bd138022a4e122021e10f1e9
Reviewed-by: Björn Breitmeyer <bjoern.breitmeyer@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Windows Embedded Compact does not have drive letters like desktop
Windows => do not try to build drive letter related test code for WEC7.
Change-Id: I2c3659220a001510c0555e2dd773b4dd68e9c2cc
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
We don't need to keep an internal QBuffer position, we can just use the
one from QIODevice::pos(). It will keep track of goings ahead and
backwards for us, plus it will make the default bytesAvailable() work
out-of-the-box too.
This error was reported on IRC.
Change-Id: I8559e8ee56edaa01ca8732c1f1012082ebe3a3f2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Previously only 32bit signed integers were ensured to be supported by
JsonValue type via API but it is expected that a larger integer range
should be supported by a JSON implementation.
This commit brings the Qt implementation into parity with NodeJS
JSON.stringify() in respect of the JavaScript Number type.
Change-Id: If91153cb3b13ecc14c50da97055b35ce42f341e7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Previously Qt JSON writer would only emit 6 digits of precision as this
is the default with the formatter.
However with testing against NodeJS JSON.stringify() this behavior is
inconsistent with the defacto standard JSON implementation and conveys
a loss of precision.
Change-Id: Ie1845a6e0ee0b4c05f63ec0062f372e891855f0b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
My interpretation of RFC4627, Section 2.4 "Numbers" of:
Numeric values that cannot be represented as sequences of digits
(such as Infinity and NaN) are not permitted.
I have also verified this matter with NodeJS JSON.stringify() that
emitting a null is consistent behavior with a JSON implementation
written in JavaScript.
Previously Qt would emit:
{
plusInfinity: inf,
minusInfinity: -inf,
notANumber: nan
}
Which maybe turned into a string values of "inf", "-inf", "nan" by
the receiving parser. Now it returns the JSON null value just like
NodeJS JSON.stringify().
Change-Id: I9f9c17f12b2606280806c47a9d90465c4ba5f786
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Auto tests using CET expect there to be no Daylight Time before 1980,
but Windows does apply Daylight Time. Fix expected test results to
match.
Task-number: QTBUG-30420
Change-Id: I7080598fa0a20c1cd5680782606ab983e714e546
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Use the correct metrics for the requested PageSize instead of always
defaulting to A4.
Task-number: QTBUG-30494
Change-Id: Ia3978afe3f7cc9b1ded1065416e5c3def44e7a05
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
QFontCache now references QFontEngineData-s it maintains,
so that QFont instances not freed prior to calling ~QFontCache()
would destroy QFontEngineData on their own.
Task-number: QTBUG-25434
Change-Id: Ia7679d64de436841f09ac7be62ceb570e50cce5b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Reviewed-by: jian liang <jianliang79@gmail.com>
In QGuiApplication only Qt::AA_SynthesizeMouseForUnhandledTouchEvents
is taken into account when synthesizing mouse from touch events, in
QApplication only the PlatformIntegration syle hint
QPlatformIntegration::SynthesizeMouseFromTouchEvents.
With this patch both attributes are checked. Furthermore the check was
moved out of translateTouchToMouse in QApplication in order not to
influence the result which is returned to the user, when mouse events
are not be synthesized.
Change-Id: I87ac7299f0a9fbf0a083eff9c547f0dbfab75dfb
Reviewed-by: Fabian Bumberger <fbumberger@rim.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
- Remove member variable testWidget and instantiate on the stack
to ensure tests do not interfere.
- Move widgets away from taskbar areas.
- Fix windows geometry warnings by making small windows frameless.
- Fix wrong target widget for key click in
keyBoardNavigationWithMouse().
Task-number: QTBUG-30573
Change-Id: I6d9fad0f212814a67367baf446750e9bed0ebdb2
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Before it would skip out a row depending on the size of the tableview.
Now it will show the next set of cells for the direction it is going in.
Change-Id: I02926d0b2187ffafffb63f7fff43c233b4d7d6af
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
By calling itemData() of the source model directly, the result cannot
contain data provided by the proxy model itself. The base class
implementation however will call data() on the proxy instead.
Change-Id: Ib0ef5f5621457adbfa4bd896a756dfcb98d0ae54
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This allows re-using the function in QtQuick.
In addition TextBoundaryType is moved to QAccessible
and QAccessible2 as namespace ceases to exist.
Change-Id: I184bc2c181a22ca51ac4db4e5a080dc26d4acfe0
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Calling clear_mapping causes the persistent indexes to be queried, and
mapped using map_to_source, so that they can be restored later. That
is not the appropriate response to the source model being deleted
because there won't be anything to restore.
Simply clear the stored mapping information instead so that the source model
actually exists when mapToSource is called by the framework.
Change-Id: I99692ee7aa9c6714aec45c68fe4a2d62be189d60
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Change-Id: I1d8061302fbb8494b5ae31e20a644745fe969f10
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Brad King <brad.king@kitware.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
- Use qWaitForWindowActive in task178797_activatedOnReturn().
- Remove hardcoded timeouts, use qWaitForWindowActive/Exposed.
- Instantiate widgets on stack or use QScopedPointer to ensure
cleanup.
- Move widgets to a central location, avoiding taskbar areas.
Change-Id: I98991b70067dddab9aa69b1681fa80398ec8b1f6
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Oracle has a limitation of 30 characters for a tablename so the main
change is to account for this, which meant changing all the usages of
qTableName(). Some other fixes are included that ensure the tests are
working correctly as far as Oracle is concerned.
Change-Id: I8ad8a5a33e6a70fcad235f6a7e82e91687b74fee
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
The only way to make this possible is to disable the
atomic-rename-from-temp-file behavior. This is not done by default,
but only if the application allows this to happen.
https://bugs.kde.org/show_bug.cgi?id=312415
Change-Id: I71ce54ae1f7f50ab5e8379f04c0ede74ebe3136d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... because SkipSingle was removed in Qt5, and a QSKIP would result in
the SSL tests not being executed.
This can be reverted once QTBUG-29972 is fixed.
Change-Id: I3663ee52f00c3f4391ce78cf63bd444656d79cb3
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
This was spotted while tracking down a similar bug related to spans.
This now also eliminates the Q_EXPECT_FAILs in
heightForWidthWithSpanning(), since it now finally works.
The problem was only for the maximum size, since the size of an ignored
row/column was min: 0, pref: 0, max: FLT_MAX (the default constructed
values for a QGridLayoutBox).
Change-Id: Ibb33c26ede40ed02edd26f596ba6133d59c9962f
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
If a row/column is only used only because of the spanning of an item,
the cell should be treated as it didn't exist. We keep track of this
with the "ignore" bit array.
The old code would always start from the row/column at position 1.
In the attached testcase this made the effectiveRowSpan become larger
than actually needed.
Task-number: QTBUG-30255
Change-Id: Ief0e7018ee8e5ee36272ce075a43312ffeac7b91
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
This functionality is used in multiple places in Qt itself, so it makes
sense to have a global function for this. This also allows to map this
onto specialized assembler instructions, should an architecture provide
them, later on.
Also added comprehensive tests, using a 4-bit lookup-table implementation
as a reference.
Change-Id: I8c4ea72cce54506ebb9fbe61141dbb5f1b7a660f
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This adds Q_DECL_OVERRIDE to the virtual functions in the test.
Change-Id: If1b7646c9a6f50c6efe2d03d253bd8e0b4c09716
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Laszlo Papp <lpapp@kde.org>
By moving it to QSqlDriverPrivate we make it easier to check what
database is actually connected which is particularly useful for the
autotests.
Change-Id: I54d1c2c998919c1d54efb1b6ac9303070ece54aa
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Since there already is a one-to-one relationship
between QObject and QAccessibleInterface it makes
little sense to create and destroy the interfaces
on each call to queryAccessibleInterface.
Add a cache and keep created interfaces around for
the lifetime of the corresponding QObject.
This changes the memory management rules: accessible
interfaces must no longer be deleted. If you get an
QAccessibleIntrface pointer that pointer will stay
valid as long as the corresponding QObject is not
deleted.
This also re-enables accessibility for Mac.
We limit the range of the IDs so that they are
useable for Windows directly.
That means we can get rid of the event cache there.
This is based on: Iebf2f374916fc70a9dd29e95f45a6444b85f6cee
Change-Id: I9fe6531812c0dbc5b41101ac05830a6dd75e13a3
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
In particular, set online state right upon construction of the
QNetworkAccessManager instance. Therefor, QNAM needs an instance of a
QNetworkConfigurationManager internally.
Before, this would only work properly if a network session was created.
Now, networkAccessible() returns the correct status.
Change-Id: I7ff9ccfd18ad376a131fc5977843b55bf185fba0
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Changelog: http://pcre.org/changelog.txt
Amongst other things, the Unicode tables were upgraded to 6.2.0
and case folding support was added, which also fixes a QString
autotest (marked as XFAIL).
Qt still requires 8.30, not 8.32.
Change-Id: I4056c1dc1d949d33443bb8ca280de4c8c363ac74
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Say hello to Interlingua and Mongolian once again.
Change-Id: I735fbc5793f34620be1f6932a251224b9ded02e3
Reviewed-by: Denis Dzyubenko <denis@ddenis.info>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
- Organize the test images into different sizes.
- Add a button and icon drawing test.
- Don't show all tests by default.
Change-Id: I95eff846b8c5159085f53b413dea7212c1ea5071
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Used by features in CMake 2.8.11.
This matches the features in FindQt4 in that version of CMake,
namely that the IMPORTED targets contain the appropriate
INTERFACE_INCLUDE_DIRECTORIES and INTERFACE_COMPILE_DEFINITIONS
and that the qtmain.lib static library is automatically linked to
on Windows by executables. Additionally, the
INTERFACE_POSITION_INDEPENDENT_CODE property is set appropriately
if Qt requires users to use position independent code.
Change-Id: Ide341f43fcaf7d722a7bdf1a12b1071c7e548ccc
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Make top-level windows generate enter/leave events
for sub-windows. Keep track of the current "under mouse"
window in mouseMoved and send EnterLeave events when
it changes.
mouseEntered/mouseExited handles enters and leaves
from the top-level window.
Add tests/manual/cocoa/nativewidgets.
Task-number: QTBUG-27550
Task-number: QTBUG-29751
Change-Id: If4b9f9e0f39d9fb05fdab45a100ffdcf107965ad
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
... but only if the QNetworkConfiguration manager requires one.
Change-Id: I1c69c43438f1df9080d207c8598a42201f759c5b
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
If you include a static library in the test, all symbols will
be duplicated, and this can cause nasty crashes because global
static data is also duplicated. This happened on Linux because
of a global static cache in the font engine where the two instances
of it would get out of sync, and we would reference invalid
data.
To test QPlatformSupport features, a QPlatformSupport test which
does not load any platform plugin (or uses its own platform plugin
which does not load QPlatformSupport) is needed. For now, I will
just revert adding the test, since it is broken and was added
as part of supporting Windows CE:
f2fabf77f9.
Change-Id: I6c002d1e0880ee8e031a68eee80e781fe0c62af4
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
The handling of StyleChange de-maximizes the child window temporarily,
which was emitting subWindowActivated.
This would crash lokalize, because deactivating a window means deleting
the widgets associated with it, and style-change handling is done in
QApplication by looping over QApplication::allWidgets, which would then
contain dangling pointers.
Full valgrind log at https://bugs.kde.org/show_bug.cgi?id=271494#c7
Change-Id: Ifb24032cde2cd470dcae7cd553ec5ab45a919dd6
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
When QTemporaryFile attempts to create a new file in
createFileFromTemplate, it fails if the filename exists and is a
directory. Windows returns error code 5 (ERROR_ACCESS_DENIED) in this
case - rather than ERROR_FILE_EXISTS - which is not handled.
This patch handles ERROR_ACCESS_DENIED in addition to the already
handled ERROR_FILE_EXISTS, meaning that QTemporaryFile will continue
to look for unique names when a directory with the same name exists.
Task-number: QTBUG-30058
Change-Id: I42339887d7f5483e3dc6a03a9da15111c350da8f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Replace <QtWidgets> includes by class includes, remove tests
that do not compile.
Change-Id: I52837e8c567dc8ac365c7d43c37beb9a368f6f72
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The plugin should try each class name from the meta object
in succession instead of giving up right away and just using
QWidget.
This improves the handling of the itemviews and makes many sub-classes
of QWidget outside of Qt work.
Change-Id: Id81017c648fe229c3eb85d6d9ae6696d5f16a1ef
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
The QODBCResult::exec() returns false when query is an delete
with no data do delete caused by SQLExecute function returning
SQL_NO_DATA, but the false return means error on execution.
Task-number: QTBUG-10569
Change-Id: I6c7ebadcf62ab404b60c7bcccdab6a10bf16a923
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
The connection to qt-project.org seems to be the one that causes this
particular test case to fail.
Task-number: QTBUG-29941
Change-Id: Ie5e430646997e86e3acb04132cd90a1773a091da
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
The test has been recently failing in CI. The problem was easy to
reproduce in a virtual machine by resizing the window of the virtual
machine small enough. This change makes sure that the requested size
hint is significantly smaller than the desktop size, to avoid the
window manager stepping in and limiting the window size.
Change-Id: Id8ce63b2b88cbed964e0330633c5d2e1dc33598c
Reviewed-by: Caroline Chao <caroline.chao@digia.com>
(cherry picked from commit 36e6632fa3)
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Skip the test on X11 where it's consistently failing in CI but not when
trying to reproduce locally. Also attempt to make test slightly more
robust on other platforms (it's already #ifndef'd for Q_OS_MAC).
Task-number: QTBUG-30271
Change-Id: I6743eb99549abbd945e380a3a54ce8620000298a
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
1. when there were some engines with ref > 1 in the cache, prior to calling
QFontDatabase::{add,remove}ApplicationFont()/removeAllApplicationFonts()
(QFontCache::clear() has never decreased engine's cache_count);
2. when the QFontEngineData's engine is not in cache i.e. the Box or Test font engine
(~QFontEngineData() didn't free engines it keeps).
Instead of using the font engine's (external) "cache_count" counter,
QFontCache now references a given font engine every time it is inserted to
the cache and dereferences exactly that number of times in clear().
Change-Id: I87677ebd24c1f4a81a53526f2e726e596b043c61
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
When variadic templates and decltype are supported, detect the best
overload of operator() to call.
Currently, the code takes the type of the operator(), which requires that
the functor only has one, and that it has no template parameter.
This feature is required if we want to connect to c++1y generic lambda
(N3418)
Change-Id: Ifa957da6955ea39ab804b58f320da9f98ff47d63
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Instead of first finding it and then testing that we can find it.
Change-Id: I1a1090693520b1d6adadef93839f25d277947e76
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This has been broken forever, just like generic signal
disconnection. It didn't use to show up before because in Qt 4,
QObject's destructor would not call disconnectNotify().
Just like in the previous commit, we need to verify whether the signal
was disconnected from the last receiver. A wildcard disconnect might
be disconnecting only from a specific receiver.
Task-number: QTBUG-29498
Change-Id: I0790128ea878fdf3ac563c99d96c6aa7d270e9a3
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
There has been a latent bug forever in QtDBus that would make a signal
disconnect actually disconnect too much. The reason is that
disconnectNotify() is called every time a signal is disconnected from
a receiver, but that doesn't mean it was the last connection.
This test checks whether disconnecting from voidSignal() to our test
receiver will also disconnect from exitLoop(). If it does, we'll get a
timeout. I could have implemented it with two receivers, but in the
buggy case, it would always fail first in the timeout verification.
Change-Id: I5766d8a38594eb25e65b304913251303660fad41
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
OpenProcess + WaitForSingleObject is supposed to fail after the process exits,
but this seems to take some time until Windows notices.
Change-Id: I942a9b4a458c23fc4ac33b28386e28821128e991
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
The test has been recently failing in CI. The problem was easy to
reproduce in a virtual machine by resizing the window of the virtual
machine small enough. This change makes sure that the requested size
hint is significantly smaller than the desktop size, to avoid the
window manager stepping in and limiting the window size.
Change-Id: Ie319892747bee60ea6f11e27b6c1bfb4731ef587
Reviewed-by: Caroline Chao <caroline.chao@digia.com>
The test has been recently failing in CI. The problem was easy to
reproduce in a virtual machine by resizing the window of the virtual
machine small enough. This change makes sure that the requested size
hint is significantly smaller than the desktop size, to avoid the
window manager stepping in and limiting the window size.
Change-Id: Id8ce63b2b88cbed964e0330633c5d2e1dc33598c
Reviewed-by: Caroline Chao <caroline.chao@digia.com>
Task-number: QTBUG-28540
Change-Id: I916d104c8aba551ee9a5b34da3fd85dcb26bbf64
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Change-Id: I8ecdda35912a95e69c2f8dd98ce9c41c77b222d2
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
moc do not see Q_COMPILER_VARIADIC_MACROS as defined (because it does
not know the builtins defines)
So it would never parse those macro, and never generate the signals or
slot.
Always let moc parse the variadic macro, and put non-macro function in
the header so the generated code would compile on every compiler
Change-Id: Ie9504539ee737c81e831b217f8d623fe810d9e35
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Remove all trailing whitespace from the following list of files:
*.cpp *.h *.conf *.qdoc *.pro *.pri *.mm *.rc *.pl *.qps *.xpm *.txt *README
excluding 3rdparty, test-data and auto generated code.
Note A): the only non 3rdparty c++-files that still
have trailing whitespace after this change are:
* src/corelib/codecs/cp949codetbl_p.h
* src/corelib/codecs/qjpunicode.cpp
* src/corelib/codecs/qbig5codec.cpp
* src/corelib/xml/qxmlstream_p.h
* src/tools/qdoc/qmlparser/qqmljsgrammar.cpp
* src/tools/uic/ui4.cpp
* tests/auto/other/qtokenautomaton/tokenizers/*
* tests/benchmarks/corelib/tools/qstring/data.cpp
* util/lexgen/tokenizer.cpp
Note B): in about 30 files some overlapping 'leading tab' and
'TAB character in non-leading whitespace' issues have been fixed
to make the sanity bot happy. Plus some general ws-fixes here
and there as asked for during review.
Change-Id: Ia713113c34d82442d6ce4d93d8b1cf545075d11d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
In Qt 4, QSignalSpy didn't *really* connect to the signal it was
spying on. See the "we need to connect the signal somewhere in order
for D-Bus to enable the rules" comments.
In Qt 5, it connects, which rendered this section of the test bogus:
since the signal is still connected, the QSignalSpy will notice that
fact and will not be empty. This is passing due to a false
positive. The upcoming fix breaks it, so we need to remove it.
Change-Id: Ic8fbf7d0e941403e97149f5bc392334a52c66ab1
Reviewed-by: Lorn Potter <lorn.potter@jollamobile.com>
Change-Id: Ib6347360d678bbe54445ebb0680ad66d77a7f3c7
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
There is no need to list the dependencies of the Widgets module.
Change-Id: I9469d4f352685f7122a258f1a44bd017fdc5b3a7
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
It is flakey and often blocks integration.
Task-number: QTBUG-29730
Change-Id: I8acfc243ec6a6782b7f7d78fc27827f3fdc1ce52
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Change the data type of PI from qreal to double, because qreal is defined as float and not as double on arm.
The testcase however expects PI to be a double value.
Change-Id: I003481071ecb2c1f54e6dcee9b450da2f1654969
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
Reviewed-by: Laszlo Papp <lpapp@kde.org>
This should have been done right from the start,
instead we only made the documentation internal.
Also remove the classes from the BIC data.
Change-Id: I238a7a7cc5d26980b23931c78e7e5a4477d46920
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Expanding on the change fixing QTBUG-24762 with the realization that any
line needs to be drawn in a consistent way regardless of system or
painter clip, not just dashed lines.
Task-number: QTBUG-25036
Change-Id: Ief7ef19cc92c52e7d792500a581a072ba032767e
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
While adding a test case for the new behavior, two issues
with the connectSlotsByName implementation came up:
1. for auto-connected slots that don't exactly match a signal,
a 'compatible' one is searched. There might be more than
one of those. The implementation randomly picks any.
2. The "No matching signal for %s" warning gets printed even for
slots that can never be connected via connectSlotsMyName
anyway (e.g. "on_something"). This is inconsistent.
This fixed both: an explicit warning is printed if more than one
'compatible' signal is found and the "No matching signal for %s"
warning is only printed if the slot adheres to the full
"on_child_signal()" naming convention.
In the process I added comments and changed the code slightly to
make it more readable and explicitly hint at non-obvious behavior.
Change-Id: Icc8e3b9936188d2da8dfff9f0373c8e5c776eb14
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Print out available information from QLibraryInfo, QStandardPaths,
QSysInfo, QPlatformIntegration, QStyleHints, QPlatformTheme
and QScreen.
Change-Id: Ia0bdc6174a1748c539acee18ba16a27a48d58ee5
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
This allows finding a minimum particular version of Qt 5.
Change-Id: I96112f1be90f397ec60a2b233989ac0e0380bef9
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The problem was that the elapsed timer was not restarted,
causing the currentTime() not being adjusted for the time
it was paused.
Task-number: QTBUG-30108
Change-Id: Ib9b2c5a0dea52762109e0b25f1068dd7c88e15ba
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Invoking find_package with a version but without the version
file present results in an error.
Change-Id: I29d662081ad5dbd7b2259abeec06affda97cbb6a
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The DBus module is aware of its QtCore dependency, and it doesn't need
to be found explicitly. This test probably dates from when that was not
the case.
Change-Id: I3c78997660efed14d84b062d38d8c68dd4f7ae56
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Adapt to API-changes, exclude network/SSL-tests for Windows.
Change-Id: I80d5ef1bd81e149a2f04fa7644376a8a88b1f7b9
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Change-Id: Iea4905d802213848594d2ad0266696e5edb884f8
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
tst_QSharedMemory::simpleProcessProducerConsumer is on the top list of
unstable autotests. Disabling it for now.
Task-number: QTBUG-25655
Change-Id: Ib297b3382b736794bab6cdb668103bef74a55d8c
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
If the widget is larger than the screen,
its title bar top left corner will be shown
inside the screen.
Task-number: QTBUG-30142
Change-Id: Id93773874be3616b3ef4b9bee6e1bb751c541d7b
Reviewed-by: Caroline Chao <caroline.chao@digia.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Replaces "QRegularExpresssion" with "QRegularExpression" and adds some
auto tests for the warning itself.
Task-number: QTBUG-30054
Change-Id: Iba333a4388795eccca809fb430c295f503794263
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
It introduced a regression by requiring that a p/P was also present:
QTime time = QTime::currentTime();
qDebug() << time.toString("h:mm:ss a");
// Outputs "10:05:42 am" in Qt 4.8.
// Outputs "10:05:42 a" with 6497649730.
This patch also clarifies the QTime::toString(QString) documentation.
Change-Id: I4d73a959c2ca76304f03a4ce9717b540ad4e8811
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
We do not currently have shared memory or system semaphore support
on Android.
Change-Id: I8e8f3fc6ff8d6de0333002c3e1b31cf070416dbd
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Android is not a proper Linux, and in particular it does not have
pthread_yield().
Change-Id: Ibf94cfacdc24d0c3baaef002c64f9f50c72c01d2
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
This broke the build on Android where fileno returns a short.
Change-Id: Ic8d32380078faeedcd22e785a912fede28251156
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
QMetaObject::connectSlotsByName(QObject* o) creates a list of all
children to look for signals that match slots of o. This changeset
simply adds the object o itself to that list.
The motivation is to finally fix the long standing QtCreator bug
QTCREATORBUG-6494. Where executing 'Go to slot...' and choosing
'accepted()' for a simple QDialog named 'MyDialog' will add a
on_MyDialog_accepted() slot to MyDialog. That slot never gets
connected. More details may be found in the linked QTBUG-7595.
Task-number: QTBUG-7595
Task-number: QTCREATORBUG-6494
Change-Id: I35f52761791af697eabb569adb5faee6fae50638
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Since we currently implement only half of the XEMBED protocol (we lack
the container part), we use a simple XEMBED container built with Gtk+
and PyObject. Using an interpreted language as Python helps us avoiding
a build dependency on Gtk+.
Change-Id: Ibc6282371c6f767e481c8a8ba2b5ca9cdd0d8b82
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
In case somebody uses QVector as a stack, it is not fair to have
takeLast, removeLast and pop_back to do way too much work.
This is still very slow compared to std::vector::pop_back
(mostly due implicit sharing), however it is more than a
factor faster than before.
Change-Id: I636872675e80c8ca0c8ebc94b04f587a2dcd6d8d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If the process terminates while QApplication::processEvents()
runs, the subsequent waitForFinished() returns false and the test
fails.
Task-number: QTBUG-29951
Change-Id: I41f461358920ad430951613dd919885f68ae212c
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
This patch adds takeFirst and takeLast which are functions
that QList also has.
Change-Id: I761f90b529774edc8fa96e07c6fcf76226123b20
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This patch adds the functions removeFirst() and removeLast().
Functions that QList has.
Beside making these functions, pop_back and pop_front are
redirected to these rather than calling erase.
Change-Id: Ifc5f8a78e33f436f06f21095a920ec5d4311fd6f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We need to clip lines to the unclipped device rect in the case of
dashing, since otherwise the dashes will be shifted and rendered
differently when partial repaints are done.
Task-number: QTBUG-24762
Change-Id: I3599b54baa552acc20bf8cc2e12f846b45f6019e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Make sure the graphics view is exposed and has been painted before
trying to grab the framebuffer.
Task-number: QTBUG-29943
Change-Id: I2945cb78b58265864744a0d5fc99fb430306b578
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
QKeySequence provides conversion to and from strings. But a similar
convenience was missing for QList<QKeySequence>. It would come in handy
when you want for instance to save/restore the shortcuts of a QAction.
Change-Id: I9e4f2001c58a595392a5019a57c564992c39bf88
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: David Faure (KDE) <faure@kde.org>
I changed the existing test-case code to make it more scalable
in terms of adding more connectSlotsByName related tests. The
old "manual list of ints"-method was really not developer friendly.
This is a preparation for a subsequent modification of
connectSlotsByName behavior.
Change-Id: Ib760e52631ce4b5ae2a3ebdb4854849ff6c93bfe
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
We cannot access children directly, since that won't ensure that
the pending sort is executed. However, the functions we need are
there already and actually makes the code nicer.
Task-number: QTBUG-29903
Change-Id: I6899284275dd79b991896a5f08486b58d95f819d
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
This provides a fast multiInsert in QMap (and a fast insert in
QMultiMap) when providing a correct hint.
Change-Id: I3c864c3a7842765fe63f8ecb4b54d0e8c9fd22d7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This adds a fast insert on QMap when providing a correct hint.
Change-Id: I256bba342932c1d4f24c6e65074e1bf47b519537
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
QImage is supposed to maintain the invariant that each scan-line begins
on a 4-byte boundary, so we need to verify that this is the case before
using the optimized path of short-cutting QImage::copy() by referencing
the source image's bits directly.
Task-number: QTBUG-14766
Change-Id: I0a178aeb2f34cc64f98deae9470b55b5c53fcb06
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Send expose events on window and view show/hide
notifications. Implement QCocoaWindow::isExposed.
Close all windows on quit. This allows sending (de-)expose
events for those windows while the event loop is running.
Remove the flushWindowSystemEvents call in setVisible.
This function is called from application code. Flushing
window system events here is wrong since it can lead
to events being processed in the middle of the user
code call stack. flushWindowSystemEvents should only
be called as a result of (native) window system activity.
Skip one of the tst_qtooltip tests which becomes unstable/
fails in the CI system as a result of this change.
Task-number: QTBUG-29583
Change-Id: I3fb8b3f77e2b2e19dfeafba5d7dfcef602891d37
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
QSharedMemory and QSystemSemaphore are not available on QNX so the autotests can not be built.
Change-Id: Ibfb405f951d21342d64bf215cedc203a8cefe070
Reviewed-by: Wolfgang Bremer <wbremer@rim.com>
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The former applies both on Mac OS X and iOS, but 'macx' is specific to
Mac OS X.
ios.conf and macx.conf now share most of their settings in the common
mac.conf. We set the default QMAKE_MAC_SDK before loading mac.conf, so
that any overrides in the device config will apply afterwards. This
means configure's mkspec parsing will be able to read the QMAKE_MAC_SDK.
Change-Id: I0c7e26a6a0103e19b23ef152aa9e4ab461cee632
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
This avoids crashes accessing deleted memory when creating a QObject
after the last QObject had been deleted, like a qDebug() in global
destructors.
==41000== Invalid read of size 4
==41000== at 0x5F01ED5: bool QBasicAtomicOps<4>::ref<int>(int&) (qatomic_x86.h:208)
==41000== by 0x5F01309: QBasicAtomicInteger<int>::ref() (qbasicatomic.h:147)
==41000== by 0x5F24051: QThreadData::ref() (qthread.cpp:100)
==41000== by 0x614A984: QObject::QObject(QObject*) (qobject.cpp:681)
==41000== Address 0x6ee73f0 is 0 bytes inside a block of size 152 free'd
==41000== at 0x4A0736C: operator delete(void*) (vg_replace_malloc.c:480)
==41000== by 0x5F240BF: QThreadData::deref() (qthread.cpp:109)
==41000== by 0x6113F6B: QCoreApplicationData::~QCoreApplicationData() (qcoreapplication.cpp:268)
The comment right above the change in qthread.cpp looks eerily similar
to the problem I'm trying to fix. However, the actual change that
introduced the change is not in the Qt public history, so we can't
know for sure what the problem was then.
Change-Id: I0dba895b041fe6cf81e6f8939ca85035cd00aad1
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Add setProgram() and setArguments() methods to the QProcess api.
Add a convenient start(QIODevice::OpenMode) method.
Move the implementation of QProcess::start() to QProcess::open()
unifying the QProcess api with other QIODevice subclasses.
Change-Id: Id1af57da05f750fe8d526d391589c05ee8037bca
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Based on the Necessitas project by Bogdan Vatra.
Contributors to the Qt5 project:
BogDan Vatra <bogdan@kde.org>
Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
hjk <hjk121@nokiamail.com>
Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Paul Olav Tvete <paul.tvete@digia.com>
Robin Burchell <robin+qt@viroteck.net>
Samuel Rødal <samuel.rodal@digia.com>
Yoann Lopes <yoann.lopes@digia.com>
The full history of the Qt5 port can be found in refs/old-heads/android,
SHA-1 249ca9ca2c7d876b91b31df9434dde47f9065d0d
Change-Id: Iff1a7b2dbb707c986f2639e65e39ed8f22430120
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Locking between processes, implemented with open(O_EXCL) on Unix
and CreateFile(CREATE_NEW) on Windows.
Supports detecting stale lock files and deleting them.
Advisory locking is used to prevent deletion of files that are still in use.
Change-Id: Id00ee2a4e77a29483d869037c7047c59cb909339
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This change fixes a failure of tst_qwidget under XFCE (Ubuntu 13.04).
Change-Id: Ic63e85a97ac6e44ce8c281a80ef4e83feecd9185
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
The QStyle implementations are becoming private, so the following
slightly verbose pattern seems to be now repeated a lot:
new QProxyStyle(QStyleFactory::create("windows"))
This change adds an alternative, more convenient constructor for
this particular use case:
new QProxyStyle("windows")
Change-Id: I97ded597a0fd3225a6354ebea0abb367237430af
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
Both gcc and clang allow the use of '$' in their identifiers as an
extension. moc should not throw a parse error if there is one in the
file. Instead, consider '$' as valid in identifiers.
Task-number: QTBUG-22720
Change-Id: I8be3a52429c0db5b7e8308b8f4fe475d3d3994bf
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
If the object has only MEMBER properties, without any other property
specifying READ, the generated will fail to compile with this error:
tst_moc.moc: In member function ‘virtual int ClassWithOneMember::qt_metacall(QMetaObject::Call, int, void**)’:
tst_moc.moc:3810:42: error: ‘_v’ was not declared in this scope
That's because the '_v' is only declared if 'needTempVarForGet' is set,
and it should be set when we have a MEMBER property.
Change-Id: I829fad3faf69654b5a3fd540857df19f4a9449d4
Reviewed-by: Gerhard Gappmeier <gerhard.gappmeier@ascolab.com>
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Most notably, .com and .net now may contain non-ASCII characters.
list has been generated from
http://www.mozilla.org/projects/security/tld-idn-policy-list.html
Change-Id: Idc3191dc782bc4173ccb19b4bc81f4f061ca7999
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This cleans a bit up in the manual test by
a) Removing a weird reference alloration (and replace . with ->)
b) rename for variable from v (which was also the view name) to n.
c) remove a big item in the scene rect that is irrelevant to the test
Change-Id: I49cb319bcc2f4bceef0c96ca86b571b0240a9a92
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
The problem was that the HolderBase destructor was getting called after
the contained type's constructor threw an exception, as is required by
RAII semantics (the base was fully initialized, so it had to be
destroyed). That was required because we want to return a non-null
pointer from operator() during destruction and return null after
destruction, to keep compatibility with Qt 4.
The solution is to only set the guard to Destroyed only if it is already
at value Initialized. This way, if the HolderBase destructor is run as
part of the stack unwinding, it knows that the construction did not
complete.
Change-Id: I9849b43ed7112bf9e70861b48a56a924c286617e
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The motivation is to enable coloration the way KDE currently does.
It can now be achieved with a QT_MESSAGE_OUTPUT set to
"%{appname}(%{category}) \033[31m%{if-debug}\033[34m%{endif}%{function}\033[0m: %{message}"
I was thinking about supporting directly color using something like
%{begin-category-color} that would be smart and detect if we are running
on a terminal, but it would be less flexible in the way the colors van
be configured.
Changelog: QT_MESSAGE_OUTPUT can contain conditionals based on the type
of the message
Change-Id: Icd8de04734a94a3afcbf542a5b78b290a1914960
Reviewed-by: David Faure (KDE) <faure@kde.org>
- Wait for shown to ensure events are processed.
- Move away from screen corners/potential task bar areas.
Change-Id: I2c3aa9b675c6b33ca0da67ee99cc6f76c502098a
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
This script was completely broken, and seems to have been abandoned.
Change-Id: If307f001237609ccb054c0a469213290294161c9
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
For systems where the Unix signature checker isn't enabled (read: Mac
and Windows), QPluginLoader must actually load the plugin to query for
the metadata. On Mac it even tried to keep the library loaded to avoid
unloading and reloading again when the user calls load().
However, that plus the fact that it was calling load_sys() (on Mac)
meant that it would bypass the reference count checking. And on all
Unix, if a library-that-wasnt-a-plugin was already loaded by way of a
QLibrary, it would have an effect of unloading said library.
So remove the "caching" of the library. We should instead invest time to
write a proper Mach-O binary decoder.
Task-number: QTBUG-29776
Change-Id: Iebbddabe60047aafedeced21f26a170f59656757
Reviewed-by: Liang Qi <liang.qi@digia.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
The rubberBandRect function is nice to have, but this patch
makes it easier to track the rubber band by emiting a signal
on change.
That makes it easier (and less clumsy/hacky) to show information
related to the rubber band.
Change-Id: If65eb85d743a1804be3fdb823a821423411e9745
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
In many situations it is handy to know the rubberband rect.
There are many situations where we want to show something
related to the rubberband.
Regardless how that is done the rubberband area is needed.
(Not having this is a flaw that can force people to do make
a customized rubberband just to get this information)
Change-Id: Ia854db4c0022b6a97b150af2b4bb78fd5e974991
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
QStandardItemModel doesn't really benefit from a reimplementation of
sibling, and the current implementation is buggy.
Task-number: 29540
Change-Id: Icf8dca29b6e1394a378db5bf6abd884f2d7fd9b9
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This fixes the compilation of the qfile autotest on qnx.
Change-Id: Iab099e8b754a4341152e338ff6e3d22a83c625e3
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
Default-constructed geometry does not mean put the window at 0,0,
and it does not mean center the window on the screen: it means
let the window manager position the window. If the window is
explicitly positioned at 0,0 though, that is a higher priority
than the transient hint; without this change, the transientFor property
had no effect. On X11, transient means use center "gravity" to
make the transient window exactly centered. But the user can still
override the geometry of a transient window, as with any window.
On OSX and Windows, neither transient window functionality nor smart
initial positioning are provided, so a window with no position set
will be centered on the screen, and a transient window will be put
at the center of its transientParent.
Change-Id: I4f5e37480eef5d105e45ffd60362a57f13ec55f5
Task-number: QTBUG-26903
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Added the following functions to QStringRef: toShort, toUShort, toInt,
toUInt, toLong, toULong, toLongLong, toULongLong, toFloat, and toDouble.
These functions use the corresponding functions found in QLocale.
Updated tst_qstringref.cpp to exercise the new functionality.
Change-Id: I38668a0cc7da0c101a62613fd16cb5a98286617f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since we're only including the Extras file one time, invoking set() for
the include dirs again will overwrite the addition of include dirs in
the extras file.
We only need to populate these variables if not set anyway, so do that.
Change-Id: I04dad0674778e79c8c12c18231b8ce6c92edf881
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
When performing macro argument substitution, one should keep the set of
macro to exclude, else we can enter an infinite recursion.
Testcase:
#define M1(A) A
#define M2 M1(M2)
Task-number: QTBUG-29759
Change-Id: I564bbfed65e1c8599592eaf12c6d67285d2fd9ce
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
This fixes QMetaType detection of const reference arguments in signals
while connecting using the new syntax and Qt::QueuedConnection
const references should have the same QMetaType as non references.
That means we need to remove the const reference while getting the
QMetaType.
Change-Id: I9b2688da7fb9ae985aec0d8fa62a1165357ffe71
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
The patch adds handling for a case when a QVector is shared between two
threads. In such scenario detaching in one thread could collide with
destruction in the other one, causing a memory leak or assert in debug
mode.
Task-number: QTBUG-29134
Change-Id: Idbff250d9cfc6cf83174954ea91dbf41f8ea4aa4
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
And update test to use the clang makespec now that it's the default.
Change-Id: Ifdd34c4220ad76f60b91fd6ef39d189f0f6525f9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Add an encrypted signal to QNAM and QNetworkReply to allow applications
to perform additional checks on the certificate chain beyond those done
as part of the standard SSL validation. This allows things like
certificate change notification to be implemented for QNAM as they can
be for QSSLSocket currently.
Change-Id: I693e3e6fec8b7040379b7e7f1f819550e6b2617f
Reviewed-by: Peter Hartmann <phartmann@rim.com>
Add intermediate certificates to our server sockets, and to our client
certs.
Change-Id: Ib5aa575473f9e84f337bebe35099506dd7d7e2ba
Task-Number: QTBUG-19825
Task-Number: QTBUG-13281
Reviewed-by: Peter Hartmann <phartmann@rim.com>
Instead of storing a single QSslCertificate for a the local cert, store
a list of them. This will allow us to handle server sockets that use a
certificate that is not issued directly from the CA root in future.
Change-Id: I9a36b9a99daa9c0bdd17f61b4ce1a7da746f2e96
Reviewed-by: Peter Hartmann <phartmann@rim.com>
We also have to make sure that when moving back to a page
that has a focusWidget(), the focus should go to the focusWidget()
Task-number: QTBUG-18242
Change-Id: Ibfa7d6361c1a456480b2f1584a88ef4c4f405709
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Exhausting the symbol list while looking for the
final right parenthesis means it is missing.
Task-number: QTBUG-29308
Change-Id: Iccf5897b0f5eb719699fd12d6c8e4a16ff189d9b
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
The "mediumfile" is actually 9.6 MB large, and makes the test slow and
even fail on mobile platforms.
Change-Id: I694d9d38e4d09c8e90a03c1141320fe2a757fdd9
Reviewed-by: Richard J. Moore <rich@kde.org>
No users/file permissions. Open function in VxWorks DKM
requires always three parameters.
Change-Id: I93fb075d82aa57e210e224bfe4ede40def82c275
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Exhausting the symbol list while looking for the
final right parenthesis means it is missing.
Task-number: QTBUG-29308
Change-Id: Iccf5897b0f5eb719699fd12d6c8e4a16ff189d9b
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Inherits QSurface and allows to use OpenGL from an arbitrary thread.
Platform plugins can implement QPlatformOffscreenSurface, otherwise an
invisible QWindow is used by QOffscreenSurface.
This patch includes an implementation of QOffscreenSurface for XCB
and EglFS platform plugins using pbuffers.
Change-Id: I57b4fc1db417331f34826dcfa754b7698782fde4
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Qt5 requires Mac OS 10.6, so we can remove checks such as
if MAC_OS_X_VERSION_MAX_ALLOWED >= MAC_OS_X_VERSION_10_6
Change-Id: Iea21727a277291148704ecf9677ed0b68c24920f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It's flakey and is blocking integration. Tracked in QTBUG-29730.
Change-Id: Ia5b8f952314bf2e1aa6dbb5c5c0a97e32e68d0f6
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
We now re-use QOpenGLExtensions/Functions from QtGui in the same way
as QtGui uses these classes. There is still some duplicated logic
in qglfunctions.cpp, but this code now at least uses the shared
QOpenGLExtensionMatcher class.
Change-Id: Ie04008c43d430ae805e6ec1c45e7e363deeb3b8f
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
All Web service APIs like Facebook, Twitter etc. use SSL for
uploading pictures etc., so it is good to have a benchmark
for that.
Task-number: QTBUG-28764
Change-Id: I590f76ac8b6575509f1635c18c35f9fe652fa8f8
Reviewed-by: Richard J. Moore <rich@kde.org>
Make it possible to test the saving/restoring of directories
which is done by default.
Task-number: QTBUG-28855
Change-Id: Id16010b6aea9cd78b9bebdbe1b148eb7f5141f8b
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Parsing for bound SQL parameters now handles identifier quoting using
double quotes (") and square brackets ([]).
The following has only 1 bound value but previously 2 were detected:
SELECT 1 AS "A?b[?']]]de?ghi", ?
Task-number: QTBUG-27159
Change-Id: Icfd02187e1126ff3b5ed11df8d4e599f574e61bf
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
As long as fonts weren't used we supported using QImage in combination
with QCoreApplication in 4.x, and there's no reason we can't continue
doing so.
Task-number: QTBUG-29643
Change-Id: I2cf351d3c93f1c175bbf624e45024d39ab913111
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
The bug was caused by changes b371f3f943
and 3bb9024952, which removed the event
forwarding that QWidget::mouseDoubleClickEvent() used to do without
making sure to call ignore() on the event like
QWidget::mousePressEvent() does.
Task-number: QTBUG-29680
Change-Id: I98af8052ad3dd1dea15d07a710aa9212ef5e4a68
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
This is possible with QWeakPointer, so allow it for migrating
code too.
In the process, replace the QPointerBase with a member variable for
simplicity. The functionality of the QPointerBase is replaced
by a TypeSelector template.
Change-Id: I3b4c77bdeda2b863cc33e84a3da8a25bae928c8c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
QPointerBase is not public or exported and it is to be removed
in Qt 5.1.
Change-Id: I060c6b2ebcde8dedde85dc21404fc393150d452c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
(?J) inside a pattern string can be used to allow or disallow duplicated
capturing group names in the pattern string itself.
Although PCRE supports duplicated names, in Qt we don't yet.
Change-Id: I21cd0c41273cd7ef42870ced3a0fad6ba7035cbc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Do not include qsslsocket_p.h unless SSL is present.
Change-Id: I7e56b7758729907892d85f97d5a9d3ccaf7a3314
Reviewed-by: Peter Hartmann <phartmann@rim.com>
QPixmap::load() would not detach, so multiple paths could get associated
with the same QPixmap, causing the wrong pixmap to be shown.
Task-number: QTBUG-29639
Change-Id: I064dd6a9611b5996853bec9fb20b6224a0adcf62
Reviewed-by: aavit <eirik.aavitsland@digia.com>
This finally makes it possible to make windows fullscreen etc from
QML by doing "visibility: Window.FullScreen". I don't see any reason
from not having the API at the QWindow-level instead of at the
QQuickWindow-level since this way it can benefit other use cases too.
Change-Id: If27344306eb563bc2ccd83296a46b1f2862e2db1
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Currently, using QDate::maxJd() in tests will fail. This patch changes
some ints to qint64s to prevent overflows where necessary.
Change-Id: I61ebf8f233411a7544689fd5bfa9c3abee54e933
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QTextCodec::codecForHtml currently fails to detect the charset for this
HTML:
<!DOCTYPE html>
<html>
<head>
<meta charset="utf-8">
<meta http-equiv="X-UA-Compatible" content="IE=9,chrome=1">
<title>Test</title>
</head>
This patch makes the detection of charsets more flexible, allowing for
the use of the HTML 5 charset attribute as well more terminator characters
("'", and ">").
I also added a *_data function for the unit tests.
Task-number: QTBUG-5451
Change-Id: I69fe4a04582f0d845cbbe9140a86a950fb7dc861
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Denis Dzyubenko <denis@ddenis.info>
This commit adds SHA3 support to QCryptographicHash. Two implementations
are provided, one optimised for 32 bit and one for 64 bits. The code has
been written to make it easy to add further implementations, for example
ones using NEON instructions on ARM.
Change-Id: I3be9c45bbd4fcc2771d697e7f7ae74e48a831e8f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
The table is there to know which domains are allowed to set cookies
and which are not. There are more than 2000 new entries since the
list has last been generated.
The split to 64K chunks was made because this is the hard limit for
strings in Visual Studio.
Change-Id: I511aec062af673555e9a69442c055f75bdcd1606
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
revert() should operate in OnFieldChange edit strategy just as
submit() does. The reason in Qt 4 for excluding OnFieldChange
was that there was no opportunity to revert. The model was
refreshed, causing all changes to be lost. In Qt 5 a failed
edit remains in the cache until user action, which could be
to revert.
Change-Id: Ide021c4f83a53834b7ed81f2abfa3aa49317704d
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
This lets you write code like format.version() >= qMakePair(3, 2), and
format.setVersion(4, 2) instead of format.setMajorVersion(4);
format.setMinorVersion(2);
Change-Id: Ib052091cc12865ea0d5db52e468ed6cd28f14840
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
DER certificates should not be opened as text files, so we
only pass the QIODevice::Text flag when the format is
QSsl::Pem.
Change-Id: I4bad98023c397b967d5beeec0aaa6c414e06fd9c
Reviewed-by: Richard J. Moore <rich@kde.org>
The existing tst_qgetputenv shows that qputenv with an empty value
doesn't lead to the same result on Windows and on Unix, and there was
no way to fully delete an env var on Unix (which is needed for some
env vars where not-set and empty are different, such as TZ,
see `man tzset`).
This is also why qglobal has qEnvironmentVariableIsSet() vs
qEnvironmentVariableIsEmpty(), on the getter side.
Qt4's ifdefs around unsetenv in qapplication_x11.cpp show that this is
needed within Qt too (although this particular startup notification code
has to be re-imported into Qt5 still).
Change-Id: I631c8cddbcf933d4b9008f11aefc59f5a3c7c866
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This improves performance since a network round trip can be avoided.
Change-Id: I1aaff7e48ef9638cb137de0f43942c3a4dd2884a
Initial-patch-by: Markus Goetz <markus@woboq.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
If the high bit in a mask is set, for instance if the mask is
0xff000000, and we shift it to the right by 24 positions, since the mask
was not declared as unsigned we ended up with a mask value of
0xffffffff. We then add 1 to this value and divide by the result,
causing a division by zero crash.
The masks need to be declared unsigned to prevent sign bit extension
when shifting right.
Task-number: QTBUG-29194
Change-Id: I79260344cebfbdd3ea86416a9c734dca76517999
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Previously, selectRow() did not work after INSERTing a new row into a
table with an automatically populated column. It did not work because
the model did not know the primary values for the new row. Newly
inserted rows were therefore not refreshed in OnFieldChange and
OnRowChange edit strategies.
This change provides support for the typical simple case where a single
column is populated by the database and can be retrieved with
QSqlQuery::lastInsertId().
Task-Number: QTBUG-29102
Change-Id: Ibf0f0ac8661185bde57034ddf40c2178bece4778
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Lukas Geyer <lgeyer@gmx.at>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Commit 10ff9de91b introduced the
optimization of ignoring non-changes, but it overshot the mark.
It neglected to consider that QVariant's equality operator does not
compare the null flag. It also failed to consider that setData() has
a useful side effect of setting the generated flag in a column of a
pending INSERT. This is important when the application actually wants
a NULL to be inserted into the column.
Task-number: QTBUG-29217
Change-Id: I1368f7acc21eebfeb5a8d23746fc38f6f30fd395
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
QSqlQueryModel::headerData() relied on virtual indexInQuery() to
detect whether the requested column at row 0 mapped to an index in
the query. This failed when row 0 was a pending insert managed by
QSqlTableModel, and therefore not in the query.
The only thing that matters here is the column.
Task-number: QTBUG-29108
Change-Id: I3e0ae85ba223e444781ec8033386d394bb44f0e8
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
It may be useful to know which named capturing groups are defined
in an regular expression, and for each of them, what's the
corresponding index. This commit adds the needed method
to QRegularExpression.
Note that extracting the information doesn't happen while holding
the mutex in the private -- pcre_fullinfo just reads information
from the compiled pattern, so that's thread-safe.
Task-number: QTBUG-29079
Change-Id: I50c00ee860f06427c2e6ea10417d5c0733cc8303
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Just like other functions this function should emit expanded and
collapsed.
A part of fixing
Task-number: QTBUG-8176
Change-Id: I6d801f61e6f0cb8836634cc52f0be2b610f6c728
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Remove srcify() function, which was warned about as unused
on Windows.
Change-Id: I731d3b6f058d4246e39dcf9a137619ae5087d751
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
When we call call collapase we emit collapsed. Therefore it should
also be emitted on collapseAll()
This partly solves:
Task-number: QTBUG-8176
Change-Id: I20c1388fcbbb60d12debb4a0b3b0d9fed41e2563
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
When we call QTreeView::expand expanded is emitted.
For the same reason we should emit expanded on expandAll()
This partly solves:
Task-number: QTBUG-8176
Change-Id: Ie85e724eec50980c68f626ec47dec5c1e08cc085
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Revert to the pre highdpi-patch behaviour.
Before, both physical and logical DPI would be based
on the dpmx/dpmy variables, which could be changed
with setDotsPerMeter(). The highdpi patch introduced
separate ldpmx/ldpmy variables, which were not
changed by setDotsPerMeter().
This broke when loading images: setDotsPerMeter
would be called but the logical dpi would not change.
Remove ldpmx/ldpmy. Keep scaling the physical dpi
by the devicePixelRatio, which will be set to 1 by
default.
Task-number: QTBUG-29187
Change-Id: I0d6f5f3b8efae5fb1adc0a50b22a5da78324a282
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
If a sourceModel resets, it's roleNames might have changed. This
is most likely the case if sourceModel itself is also a proxy model
of which the sourceModel was changed.
Task-number: QTBUG-28982
Change-Id: I102788f2c9bf97b4002b350673f9219e32e7a052
Reviewed-by: Nils Jeisecke <jeisecke@saltation.de>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
type is unsigned long, should be %lu. Replace by stream.
Change-Id: Ib0346b54a4494910b4a5927d0de45840ca53fbda
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
This was part of Qt 4.8, but Qt 5.0 was branched before that, so
the commit was lost.
Change-Id: I2a2ab3c75a0943ac734d588ebd74bc158dd6aaaf
Reviewed-by: Nils Jeisecke <jeisecke@saltation.de>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
QtTestLib and QTestLib don't exist. The proper name is "QtTest" (code)
or "Qt Test" (English)
http://qt-project.org/wiki/Spelling_Module_Names_in_Qt_Documentationhttp://lists.qt-project.org/pipermail/interest/2012-December/005221.html
Files paths in qttestlib.qdocconf can't be changed easily however, as it
breaks things. So, they're left as they are.
Change-Id: Ifbc44ea858c453bedad8cd7723f847e67fc7a85a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
It can be used to determine whether expand() should really expand.
Change-Id: If79d8c295a4ca1356e60051682b227524a065126
Reviewed-by: David Faure (KDE) <faure@kde.org>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
It may interfere with other file system tests.
Task-number: QTBUG-29014
Change-Id: I32dd7428993b0da1a2f70ec3e581050012a4ff32
Reviewed-by: Simo Fält <simo.falt@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
This is to ensure that the compiler won't optimise it out of existence.
Clang says it will do it:
testProcessCrash/main.cpp:50:5: warning: indirection of non-volatile null pointer will be deleted, not trap [-Wnull-dereference]
*(char*)0 = 0;
^~~~~~~~~
Change-Id: Iac7771046442f869e205e8789fffdd6443d58e67
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
The macro was made empty in ba3dc5f3b5
and is no longer necessary or used.
Discussed-on: http://lists.qt-project.org/pipermail/development/2013-January/009284.html
Change-Id: Id2bb2e2cabde059305d4af5f12593344ba30f001
Reviewed-by: Laszlo Papp <lpapp@kde.org>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: hjk <hjk121@nokiamail.com>
These tests were added to Qt 4 on commit
a17fc85b51a6bdcfa33dcff183d2b7efd667fb92
Task-number: QTBUG-28985
Change-Id: I3cf595384f14272197dcfb85943213c8f8ddeba0
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Add function to move back data to the stack.
Change-Id: Ic78a368459bce68629e29602e4eeae2e1afe398b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: I66c4e274c8b686d8a69476ad10751008f256e5a2
Reviewed-by: Laszlo Papp <lpapp@kde.org>
Reviewed-by: Jonathan Liu <net147@gmail.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
VxWorks does not have QProcess support.
Change-Id: I917b769f967e9d71ec5025aae788f3e237b07aeb
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
(cherry picked from commit 416e73a0fc)
Use the test's temporary directory instead of
QDir::temp() and the documents folder
instead of QDir::home(). Split out unrelated test
from data-driven sort test.
Task-number: QTBUG-29014
Change-Id: I229f0b1c0f1e43b56d19ebd43fd7cc64a85b1222
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
A itemview item with its flags set to Qt::NoItemFlags is considered
disabled, and therefore should not cause the activated signal
to be emitted.
Task-number: QTBUG-20490
Change-Id: If824505c46f4fcadb9265ad6d1e9337f0cee32cf
Reviewed-by: David Faure (KDE) <faure@kde.org>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
