In particular, this changed the US currency formats for negative
amounts to be parenthesised versions of the positive amount forms,
rather than having a minus sign after the $ sign. Test updated.
[ChangeLog][QtCore][QLocale] Currency formats are now based on CLDR's
accounting formats, where they were previously mostly based (more or
less by accident) on standard formats. In particular, this now means
negative currency formats are specified, where available, where they
(mostly) were not previously.
Task-number: QTBUG-79902
Change-Id: Ie0c07515ece8bd518a74a6956bf97ca85e9894eb
Reviewed-by: Cristian Maureira-Fredes <cristian.maureira-fredes@qt.io>
When doing a shift-select while moving the mouse then the start point
should be based on the start of the current selection and not the
pressed position. If there is no current selection start index, then
we can safely depend on pressed position as this will be the previous
index pressed on.
This resolves an issue introduced by
e02293a76d when fixing QTBUG-78797
Fixes: QTBUG-81542
Change-Id: Ia66c42b220452fdcbc8cfccc05dbc8a3911c3f5e
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
QByteArray doesn't like it.
Apply the same protection to QString, which we know uses the same
backend but uses elements twice as big. That means it can contain
slightly more than half as many elements, but exact half will suffice
for our needs.
Change-Id: Iaa63461109844e978376fffd15f9d4c7a9137856
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
When drawing multiple distinct (unconnected) lines (e.g. from
QPainter::drawLines() or a QPainterPath with alternating
movetos/linetos), the dash pattern should not continue from one to the
next, as it should when drawing a connected line (e.g. polyline).
Both the cosmetic stroker and the full stroker does it right, but the
fast rasterizing codepath got it wrong.
Fixes: QTBUG-83048
Change-Id: I3d090f7121726755a0e53cb66b99a5563ac0e1c0
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Increasing the sample size of randomly generated test samples reduces
the probability of small deviations from the expected uniform
distribution.
On my machine with the new values the test fails approximately once per
3000 consecutive runs, instead of failing once per 300.
Change-Id: I4d1815504c353290a2fb350b3fd1cbb802f8d559
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A simple 16k file can produce deep enough recursion in Qt to cause stack
overflow. So prevent that.
I tested 4096 recursions just fine on my Linux system (8 MB stack), but
decided 1024 was sufficient, as this code will also be run on embedded
systems that could have smaller stacks.
[ChangeLog][QtCore][QCborValue] fromCbor() now limits decoding to at
most 1024 nested maps, arrays, and tags to prevent stack overflows. This
should be sufficient for most uses of CBOR. An API to limit further or
to relax the limit will be provided in 5.15. Meanwhile, if decoding more
is required, QCborStreamReader can be used (note that each level of map
and array allocates memory).
Change-Id: Iaa63461109844e978376fffd15fa0fbefbf607a2
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
If we detected that the OS supports a version of system forkfd (Linux
pidfd, FreeBSD procdesc), the forkfd_wait() function was using only the
system waiting implementation, which of course can't work for file
descriptors created with FFD_USE_FORK. So just detect EBADF and attempt
again.
If the file descriptor is neither one of our pipes nor a system forkfd,
bad things will happen...
Fixes: QTBUG-82351
Change-Id: I4e559af2a9a1455ab770fffd15f59fb3160b22eb
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Currently depending if user uses QApplication
or QGuiApplication we end up in different behavior
when running post routines. For example QApplication
destructor calls post routines before stopping event dispatcher,
In case of QGuiApplication post routines are called
from QCoreApplication destructor, so no more event dispatcher.
This behavior is not consistent and creates troubles
when releasing resources of web engine.
Attached test will hang on windows with QGuiApplication,
however works fine with QApplication.
Task-number: QTBUG-79864
Change-Id: Ice05e66a467feaf3ad6addfbc14973649da8065e
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Don't introduce another overload with two parameters. Users
want a simple signal to connect to, not another overload. Deprecate
the currentIndexChanged(QString) overload, usage of that can/should
get replaced by currentTextChanged().
This partially reverts commit 11dc7b35c8.
Change-Id: I5e7d16413f3d62b1a5a7a197f510af2c45cdfa55
Reviewed-by: Vitaly Fanaskov <vitaly.fanaskov@qt.io>
QDateTimeEdit very aggressively prevents user input that would result in
values that are outside the dateTimeRange. While keyboardTracking is on
this makes sense, as otherwise the dateTimeChanged signal would be
emitted after each section, with a value that is outside the range.
However, this prevented users from entering a date that is allowed, but
where sections of the date are above or below the respective section in
the maximum or minimum value.
If keyboardTracking is off, QDateTimeEdit only emits the dateTimeChanged
signal at the end of editing, when focus is lost or the return key is
pressed, and then it enforces that the value is within the range anyway.
This change makes the parser ignore the range during editing if
keyboardTracking is off, thus allowing the user to enter a date where
temporary values are outside the range.
The test makes sure that we don't get signals emitted with out-of-range
values, testing both with and without keyboard tracking.
Change-Id: I00fb9f1b328a3477163f890c4618b40878657816
Fixes: QTBUG-65
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Keypad navigation within a group should work for auto-exclusive buttons,
or for checkable buttons that are in a button group. Since the code
already tests whether the button should be treated like an exclusive
(which implies checkable) button, use the result of that test when
finding the candidate button to move focus to, and not only when
actually changing the checked button and the focus.
Change-Id: I4dc41a90d51a8304483046252ceff0ebfe2a2e52
Fixes: QTBUG-27151
Done-with: david.faure@kdab.com
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Test fails on MinGW 8.1 x86, but not on MinGW 8.1 x86_64.
Task-number: QTQAINFRA-3304
Task-number: QTBUG-69947
Change-Id: Ie9a35bd6d5a8481028cd0ea426d1cf00bd7cf093
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Since the test was refactored and QCursor::setPosition() replaced
with QTest::mouseMove(), the test is completely crippled on macOS,
since it relies on the parts in widget's code, ifdefed with condition
!Q_OS_OSX and commented as "Cocoa tracks popups". Yes it does,
but not for "fake" events generated by QTest. The original test
was introduced when fixing different problems on non-Apple platform(s)
anyway. Let's make QSKIP message saying the truth.
Task-number: QTBUG-63031
Change-Id: If54f195ccc0d4409cc2e7f4ae0b0fbf43989b286
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
QSet and std::(unordered_)set were so far not treated as appendable, as
they lack a push_back method. We do however need support for this in
declarative to enable converting back from QJSValue arrays to sets.
We achieve this by testing for and using the insert method. While vector
has also such a method, it doesn't take a single value, but rather a
position or iterator + value, so the template specialization is not
ambiguous.
Task-number: QTBUG-82743
Change-Id: I74fc7b1b856d9bcd38100b274ba2b69578ea8bbb
Reviewed-by: Ulf Hermann <ulf.hermann@qt.io>
The call of _control87 would crash because of the previous test.
Change-Id: I254efe9c2e9892a473a02663e5ff7016791d5d6d
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
tst_QSocks5SocketEngine::simpleConnectToIMAP() is flaky. It may be
useful to log the socket error, to provide more info in case the
test fails again.
Change-Id: Ia5518dce13fd9da1fa5bfb3d5cf3a52a908b8698
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Sometimes this test would fail due to the session not actually being
reused. The cause of this was that the requests were sometimes being
completed 1-by-1, enabling the individual requests to re-use the
already-connected socket completely because it stayed connected.
Setting the Connection-header to close lets us be sure that
the socket cannot be re-used when the request is finished.
Fixes: QTBUG-82846
Change-Id: I5da8baa50a3a45fb60f1e1613e500e3e9c034fb0
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
drawTree() does
QPoint hoverPos = d->viewport->mapFromGlobal(QCursor::pos());
d->hoverBranch = d->itemDecorationAt(hoverPos);
and itemDecorationAt does
const QModelIndex index = q->indexAt(pos);
which might very well be an invalid index.
Change-Id: I7db98871543bd7e1c57fcc475d2646757bf2bb42
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
qDecodeMYSQLType() did not handle FIELD_TYPE_GEOMETRY and therefore the
type for a POINT column was incorrectly treated as QVariant::String.
Even the type can not (yet) be properly decoded to a QPoint, treating it
as QVariant::ByteArray is the better option here.
Fixes: QTBUG-72140
Change-Id: I12e75b326ae3acb75cb36f2e650464528bd43c0e
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Include WordBreakTest.html, since a test uses sample strings from it,
albeit without actually reading the file.
Had to comment out more of the new tests, as at Revision 24, pending
an update to harfbuzz and the text boundary detection code.
Task-number: QTBUG-79631
Task-number: QTBUG-79418
Task-number: QTBUG-82747
Change-Id: I0082294b09d67ffdc6a9b5c15acf77ad3b86f65f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This has been flaky on OpenSuSE; if the stored geom.topLeft() is 0,0
it apparently means the window manager (probably kwin) didn't get around
to decorating and repositioning the dialog by the time
qWaitForWindowExposed() returns. Because we check later to see whether
it moved, we need to be certain of its initial position.
Waiting for the extra "fleece" widget to be shown was based on the
theory that by the time the X server has processed messages related
to that new window, the WM should be done processing the consequences
of the resized dialog window. But there's no such guarantee, so let's
try removing that. On the other hand, removing the delay does open
us up to miss a regression (maybe the dialog gets moved after we have
checked that it didn't move).
Rename because we don't name autotests after bugs.
Amends 26ddb586ac
Task-number: QTBUG-32473
Change-Id: I6bbfe2b4baaee389db0d4112f0fec3b7cb9da554
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Liang Qi <liang.qi@qt.io>
Use QTRY_COMPARE in the flaky tests instead of waiting.
Change-Id: Ic18fc5fde3fa47f3b3ef21e6acd876bd6990981d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This exercises the multi-threaded codepath and also tests precision
a bit higher.
To avoid quadratic blowup, only a short set of formats are tested in
the larger conversion tests.
Task-number: QTBUG-82818
Change-Id: I411deb97aea61a69fbdb24cbaf6559dd9436b703
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
We are, arguably, not testing QProcess and its ability to start or finish,
we test QUdpSocket. If, for some reason (as we discovered on some
specific machines recently) the process does not start or does not produce
any output (canReadLine), we QSKIP instead of failing. Also, all those
QCOMPARE will bypass the part there we stop processes - so must be
RAII-protected.
Fixes: QTBUG-82717
Change-Id: Idfb0d4a483d753f336b3827875eeaf51c79270e2
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The effect of the soft-hyphen needs to be updated once the final the
break point has been found.
This change cleans the logic by using two variables keeping track of
soft-hyphen at current evaluated position and at last confirmed break
point. Also adds tests for supression of soft-hyphens in the tight
WrapAnywhere case.
Fixes: QTBUG-35940
Fixes: QTBUG-44257
Change-Id: I7a89a8ef991b87691879bb7ce40cec4a3605fdd5
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
QLinkedList has been deprecated, but we still need to test it. Suppress
the warnings for QLinkedList used in tests. Note, that I had to move
some of the test code, to avoid repeating
QT_WARNING_PUSH/QT_WARNING_POP everywhere.
Change-Id: I4203b3ef50045c4f45475a08638dbdc60f68761d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Introduces a new QRhiShaderResourceBinding function that takes an array
of texture-sampler pairs. The existing function is also available and is
equivalent to calling the array-based version with array size 1.
It is important to note that for Metal one needs MSL 2.0 for array of
textures, so qsb needs --msl 20 instead of --msl 12 for such shaders.
Comes with an autotest, and also updates all .qsb files for said test
with the latest shadertools.
Task-number: QTBUG-82624
Change-Id: Ibc1973aae826836f16d842c41d6c8403fd7ff876
Reviewed-by: Christian Strømme <christian.stromme@qt.io>
- QLoggingRule::parse() and the ctor take pattern as QStringView
- parseNextLine takes lines as QStringView and produces the pattern as
QStringView for QLoggingRule
- (setContent has to wait for QStringTokenizer)
- QLoggingRule::pass()'s first argument is always QLatin1String, so
take it as one
Use chopped() more, add a std::move().
Change-Id: Ic95ea77464a9922fef452846bc6d5053bd5de56e
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
No surprises, as char16_t is transparently handled by QChar overloads.
Ok, one surprise: we seem to have QChar <> QByteArray relational
operators, but they don't work for char16_t. Probably members of
QChar, so LHS implicit conversions are disabled. Didn't investigate,
because it needs to be fixed at some point anyway, but that point is
not now.
Change-Id: I74e1c9bdd168e6480e18d7d86c1f13412e718a32
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
... to not fold QChar tests into QString ones.
This is needed for adding char16_t tests.
Change-Id: I2507d7d68a39ff96cf033eadde10e383dc976dda
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
In QByteArray, they were just not marked as such.
In QString and QStringRef, the implicit conversion from QChar to
QString would destroy it. Add a QChar overload, delegating to
QStringView.
Added docs for the new overloads, copying from the nearest neighbor so
as to not look out of place. All string classes use different wording
for these functions. A cleanup of this state of affairs is out of the
scope of this patch.
Change-Id: I0b7b1d037aa229bcaf29b793841a18caf977d66b
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The test was fixed and metrics show no flaky failures anymore.
Task-number: QTBUG-58713
Change-Id: I50c0844db099f45bb5b7ca51a510bf0318554c44
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
resolve() is technically thread-safe if the library has been loadaed. We
don't promise that, but it's there. More importantly, because
QLibraryPrivate is shared among QPluginLoader and QLibrary that point to
the same file, we can't thread-safely set the error string.
[ChangeLog][Important Behavior Changes] QLibrary::resolve() will no
longer set or clear the error string based on the success of finding the
symbol. The error string will reflect the result of loading the library.
Change-Id: I46bf1f65e8db46afbde5fffd15e1a4f4c2713c17
Reviewed-by: David Faure <david.faure@kdab.com>
d7cb21ac08 change the way a double is
converted which resulted in less precision.
Fix it by explictily setting the precision in QString::setNum()
Task-number: QTBUG-80068
Change-Id: I1fd9d00837155ceb707e84bfeb9deff03b5ab57e
Reviewed-by: André Hartmann <aha_1980@gmx.de>
Reviewed-by: Konstantin Shegunov <kshegunov@gmail.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
When _NET_WM_STATE_HIDDEN is not contains in the _NET_WM_STATE
window property, the window should not be considered to be minimized
According to
https://specifications.freedesktop.org/wm-spec/1.3/ar01s05.html
_NET_WM_STATE_HIDDEN should be set by the Window Manager to indicate
that a window would not be visible on the screen if its desktop/viewport
were active and its coordinates were within the screen bounds. The
canonical example is that minimized windows should be in the
_NET_WM_STATE_HIDDEN state. Pagers and similar applications should use
_NET_WM_STATE_HIDDEN instead of WM_STATE to decide whether to display a
window in miniature representations of the windows on a desktop.
For mutter/GNOME Shell, without _NET_WM_STATE_HIDDEN, window manager
will not reply XCB_ICCCM_WM_STATE_ICONIC settings in WM_CHANGE_STATE
client message.
Task-number: QTBUG-76147
Task-number: QTBUG-76354
Task-number: QTBUG-68864
Done-With: Liang Qi <liang.qi@qt.io>
Change-Id: Ic9d26d963979b7f0ef4d1cf322c54ef8c40fa004
Reviewed-by: Uli Schlachter <psychon@znc.in>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This patch adds the arrow operator to the stl-like key-value
iterator (QKeyValueIterator) for QMap and QHash.
This allows using normal member access syntax it->first and it->second
instead of having to use (*it).first and (*it).second.
[ChangeLog][QtCore][Containers] Added operator-> to the key-value
iterator for QHash/QMap.
Change-Id: I9cfa6480784ebce147fcfbf37fec5ad0080e2899
Reviewed-by: Vitaly Fanaskov <vitaly.fanaskov@qt.io>
