Always verify that the application has an active window before
attempting to generate a key click.
This problem potentially affected all platforms, but is rare on non-qpa
Linux since QTest::qWaitForWindowShown would usually avoid the problem
on that platform.
Change-Id: I0c30be6228361faffa121c9c2d7a667f8351ebd6
Reviewed-on: http://codereview.qt.nokia.com/2896
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
This test can't work because QCursor::setPos() isn't yet implemented
for qpa.
Task-number: QTBUG-20753
Change-Id: I2da8f920bd2d4706bbbcd983e11d2cc19055d2bf
Reviewed-on: http://codereview.qt.nokia.com/2891
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
These tests cannot be written properly for qpa, due to missing API.
Task-number: QTBUG-20864
Task-number: QTBUG-20863
Change-Id: I2b311833a6738b1830c1cd8be1f20293492bebda
Reviewed-on: http://codereview.qt.nokia.com/2877
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
Since the test is irrelevant for Q_WS_X11 and Q_WS_QWS, it's almost
certainly irrelevant for Q_WS_QPA too.
Change-Id: Icc563046baf4c2a5217b87dee150afc7f6fd034d
Reviewed-on: http://codereview.qt.nokia.com/2876
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
We can finally remove the hack where a copy of QXmlStream
was compiled into QtXml on some platforms.
Change-Id: Ia164caa73dfb470ac86d1b4062031093b433d10c
Reviewed-on: http://codereview.qt.nokia.com/2869
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
The floating point problem which causes this test to fail is not
triggered if Qt is compiled in debug mode. Enable QEXPECT_FAIL more
narrowly.
Task-number: QTBUG-20661
Change-Id: I25f3260b516cd4fda9d8b711aa1140cbda821412
Reviewed-on: http://codereview.qt.nokia.com/2719
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
As virtually all of our tests which use the live qt-test-server, this
test is inherently unstable.
Change-Id: I27fc07a28b8dd6cd4dd3cb6414389e3cf41d0318
Reviewed-on: http://codereview.qt.nokia.com/2795
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
Mark all of these autotests as `insignificant' until the underlying
crash bug is fixed.
Task-number: QTBUG-20756
Change-Id: I18fb7038dd86ef2e9a5f37c8f26d7fe76032754e
Reviewed-on: http://codereview.qt.nokia.com/2714
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
The rest of this test gives unpredictable results if initTestCase fails.
Normally, a failure in initTestCase skips the rest of the test, but this
is not the case if QEXPECT_FAIL is used. Adjust the test to ensure the
rest of it is still correctly skipped.
Change-Id: I8ba76161e788f10801029ef10693e9ac275a2897
Reviewed-on: http://codereview.qt.nokia.com/2713
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
This test unstably fails for qpa, xcb, so mark it as insignificant.
Task-number: QTBUG-20761
Change-Id: I0b4228c2803946ef87d7d11f4167017c2ffd0ad6
Reviewed-on: http://codereview.qt.nokia.com/2658
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
QBezier::pointAt() could potentially return values outside the bezier's
bounds, even when the bezier was a straight horizontal line. For
example, with y = 0.5, it would produce y=0.5 or y=0.49999999999999 for
different values of t, which when rounded cause jittering in a QML
PathView.
Task-number: QTBUG-17007
Task-number: QTBUG-18133
Cherry-pick-of: 8b66982ec7b4b5d2071931c288973dce73dc9875
Change-Id: I4ecac7b9085aaaaaaaaaaaaaaaaaaaaaa7d7b0bc
Reviewed-on: http://codereview.qt.nokia.com/2467
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
This test had an invalid circular dependency: the test is in qtbase, and
it depends on lrelease in qttools, which depends on qtbase.
Change the test to skip if lrelease is not available or not working.
Change-Id: I4696f4a178a6f8c0f2e76b5c4ae7f60c4f953334
Reviewed-on: http://codereview.qt.nokia.com/2619
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
... and add a new method subjectAlternativeNames() instead. This was
a typo in the API.
Change-Id: Id8704c387c9ff8e1af2b9a524ff628f5c053a294
Reviewed-on: http://codereview.qt.nokia.com/2618
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
This test had an invalid circular dependency: the test is in qtbase, and
it depends on lrelease in qttools, which depends on qtbase.
Change the test to skip if lrelease is not available or not working.
Change-Id: I964ddaf9485a2afed5a1bd4f88d9bdccadf1cfca
Reviewed-on: http://codereview.qt.nokia.com/2472
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
The test CA I used for the QSslCertificate autotests had a short
lifespan which meant that the tests now fail. See bug QTBUG-20582.
This change gives it a lifespan of 10 years matching the leaf
certificates.
In addition, remove the temporary QEXPECT_FAIL statements.
Change-Id: Ic1918e6e31f5cc755ec43d899663140ebe95a2a9
Merge-request: 37
Task-number: QTBUG-20582
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Reviewed-on: http://codereview.qt.nokia.com/2548
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
qtbase failed building on Mac OS 10.5 and 10.6. This patch
just rearrange some headers etc
Change-Id: If85ac69029533a195249e84f8803ced6c0ff22b6
Reviewed-on: http://codereview.qt.nokia.com/2517
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@nokia.com>
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dietrich-de@nokia.com>
This test fails pseudorandomly, which makes the result insignificant
for the purpose of detecting regressions.
Task-number: QTBUG-20688
Change-Id: I3274953841a553e35b4eb844702868f2f9ec0525
Reviewed-on: http://codereview.qt.nokia.com/2491
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
This test crashes pseudorandomly, which makes the result insignificant
for the purpose of detecting regressions.
Task-number: QTBUG-20686
Change-Id: I3079d935d46a4bcd2b119c2b9b452f0b69dccf21
Reviewed-on: http://codereview.qt.nokia.com/2479
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
Changes the failure message from the previously brief:
'(errors.count() == 0)' returned FALSE.
To the vastly more useful:
'(errors.count() == 0)' returned FALSE.
(errors: [ "The certificate has expired" ])
Change-Id: I587cd8ddfd3c17e273220bc95691b3dc92390547
Reviewed-on: http://codereview.qt.nokia.com/2241
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
This autotest may fail depending on the version of fonts which are
installed on the system. It has no way to verify if the correct fonts
are installed, and it's unclear from where the correct version of the
fonts may be obtained.
Therefore, disable the test by default unless the user has indicated
that they have a correct setup by setting QT_HAVE_TEST_FONTS=1.
Task-number: QTBUG-20682
Change-Id: I24174520f54af6a9b2c13c9c1347f46555bce3d4
Reviewed-on: http://codereview.qt.nokia.com/2469
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
This autotest failure is stable, so it should be marked with
QEXPECT_FAIL, not CONFIG+=insignificant_test.
Note that the test row naming had to be changed, as the test previously
created many rows of testdata with the same name, making it impossible
to skip only the broken rows.
Task-number: QTBUG-20661
Change-Id: Ie38f5dddafe7686e30eaa8ff3445310935d2cd9a
Reviewed-on: http://codereview.qt.nokia.com/2419
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
This test unconditionally assumed that SVG support was available.
This is an invalid circular dependency: the test is in qtbase and
depends on qtsvg, which depends on qtbase.
Change the test so that it uses SVG support only if available.
Change-Id: Ia63ce74abdecd4bcf7a4e0714b8cb7c488e17495
Reviewed-on: http://codereview.qt.nokia.com/2426
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
This test assumed that C++ exceptions could always be caught by the
event loop. This is not the case when the Glib event loop is used.
Skip the relevant portion of the test in that case.
Change-Id: I6a6325c3590c810a5aba28ec98279581dcfaf55c
Reviewed-on: http://codereview.qt.nokia.com/2455
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
This test assumed that Qt's available image formats could be determined
at compile time. This was never correct since the image formats are
loaded from plugins at runtime; in Qt5 it became a real problem since
one image format (svg) was moved out of qtbase into a separate module,
turning this into a circular dependency: this test in qtbase depends on
qtsvg, which depends on qtbase.
Always check the image formats at runtime instead.
Change-Id: I5e770c5b11276c39910e34f232a2fea0a7abaa8c
Reviewed-on: http://codereview.qt.nokia.com/2457
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
Increased thread wait timeout from 3 to 10 milliseconds, for slower or
heavily loaded machines. (There was a previous attempt to improve
stability of this test some time ago by increasing the timeout from 1
to 3 milliseconds.)
Note that this increases the runtime of the wakeOne test from ~5 to ~14
seconds.
Change-Id: Ib556d4c949a6989fe71c11f5dc10feb2ec45c512
Reviewed-on: http://codereview.qt.nokia.com/2458
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
Removed some binary compatibility tests written specifically to test a
change introduced between Qt 4.1 and 4.2. Qt 4 and 5 are not binary
compatible, the test no longer makes sense.
Change-Id: I3e8f9b6011105e504c20bedad51af8193b102552
Reviewed-on: http://codereview.qt.nokia.com/2464
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
This autotest failure is entirely stable, so QEXPECT_FAIL should be used
instead of insignificant_test.
Task-number: QTBUG-20687
Change-Id: I0444e725b436fe93d30cbe54edc673594ca9b9fe
Reviewed-on: http://codereview.qt.nokia.com/2486
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
tst_qfilesystemmodel::sort uses some internal API to affect the sorting
behavior. This means that part of the test must be disabled when
private symbols aren't available.
Change-Id: I2e7b9d7a33cb3e7032bc5380c03fa29ecc84e12c
Reviewed-on: http://codereview.qt.nokia.com/2413
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
These tests assumed that a crashing program will always exit within
five seconds. This is not true in some situations. On our test macs,
enabling crash dumps can easily cause a process to take longer than
five seconds to crash.
Increased the timeout to 30 seconds.
Change-Id: Ifca240ac8d3da1346f33110653ac47de6ba2ab81
Reviewed-on: http://codereview.qt.nokia.com/2407
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
If we do not process the event, q->underMouse may return false in
QGraphicsViewPrivate::centerView (as the QEvent::Enter has not been
received yet.)
It was working before if by luck, the window appears under the cursor.
Change-Id: I9b4497683eae20915680297013a9c21fd6275f4b
Reviewed-on: http://codereview.qt.nokia.com/2385
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
And added a POD QBasicMutex. (QBasicMutex* can safely be
static_cast'ed to QMutex*)
The d pointer is not anymore always a QMutexPrivate.
If d == 0x0: the mutex is unlocked
If d == 0x1: the mutex is locked, uncontended
On linux:
if d == 0x3: the mutex is locked contended, waiting on a futex
If d is a pointer, it is a recursive mutex.
On non-linux platforms:
When a thread tries to lock a mutex for which d == 0x1, it will try to
assing it a QMutexPrivated (allocated from a freelist) in order to wait
for it.
Change-Id: Ie1431cd9402a576fdd9a693cfd747166eebf5622
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-on: http://codereview.qt.nokia.com/2116
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Olivier Goffart <olivier.goffart@nokia.com>
When a table that is related to in a QSqlRelationalTableModel gets
updated in some way (e.g. a new row, or the data is changed) then the
related model could not be updated without recreating the
QSqlRelationalTableModel.
Now, to get around this, select() can be called on the related model to
get it to be updated.
Task-number: QTBUG-7885
Reviewed-by: Charles Yin
Reviewed-by: Michael Goddard
Change-Id: Ic589e840234f3a809bcb112a807a87afe0bc25ca
(cherry picked from commit 2c60a4f67f9fb02f3b711fe749b2f293a07b4e02)
Reviewed-on: http://codereview.qt.nokia.com/2224
Reviewed-by: Charles Yin <charles.yin@nokia.com>
Mark the selection as dirty if an input method event contains a
selection and emit selectionChanged() if it's not emitted by
finishChange().
Task-number: QTBUG-19731
Change-Id: Ief6f06f40071f64dae4db0ba365676c059a39c7e
Reviewed-on: http://codereview.qt.nokia.com/2081
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Andrew den Exter <andrew.den-exter@nokia.com>
Test started to fail, complains about outdated SSL certificate.
Task-number: QTBUG-20582
Change-Id: I2622375d9bc7b446dbbc18f72403896c60a8dee1
Reviewed-on: http://codereview.qt.nokia.com/2307
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Jonas Rabbe <jonas.rabbe@nokia.com>
This is a generic implementation of the lock-free free list found in
qabstracteventdispatcher.cpp. Use next() to get the next free entry in
the list, and release(id) when done with the id.
This version is templated and allows having a payload which can be
accessed using the id returned by next(). The payload is allocated and
deallocated automatically by the free list, but *NOT* when calling
next()/release(). Initialization should be done by code needing it after
next() returns. Likewise, cleanup should happen before calling
release(). It is possible to have use 'void' as the payload type, in
which case the free list only contains indexes to the next free entry.
Autotest included.
Change-Id: Ifd12a961d47f3d76593c45061f72e55c9b80a43b
Reviewed-on: http://codereview.qt.nokia.com/2160
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Olivier Goffart <olivier.goffart@nokia.com>
Check if the input method removes the selection and force emit
selectionChanged if it sets a new selection.
Task-number: QTBUG-19727
Reviewed-by: Martin Jones
Change-Id: Ic8ea1044d0917aac4e52368f431ac9e5c7db7c56
Reviewed-on: http://codereview.qt.nokia.com/2076
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Andrew den Exter <andrew.den-exter@nokia.com>
A reversed selection will have the same resolved start and end
positions but a different cursor position so testing the end points
alone doesn't guarantee the selection is the same.
Task-number: QTBUG-19456
Reviewed-by: Martin Jones
Change-Id: I516e5a501ec878d673f21e54d688fd2d21b624ef
Reviewed-on: http://codereview.qt.nokia.com/2080
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Andrew den Exter <andrew.den-exter@nokia.com>
The headers are just skipped, information stored in them is ignored.
Merge-request: 824
Change-Id: I48f37757114ed83cd5c92cb3d5a43eeaca4b91b3
Reviewed-on: http://codereview.qt.nokia.com/2108
Reviewed-by: Kim M. Kalland <kim.kalland@nokia.com>
According to the C++ standard, there is no guarantee that
you can cast between function pointers and void pointers
without data loss (section 5.2.10-6).
Change-Id: I27f4d835e4c8ca8ecca0d76cfea9ce34491956bd
Reviewed-on: http://codereview.qt.nokia.com/1995
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
If QT_GUI_PASSWORD_ECHO_DELAY is defined in qplatformdefs.h with an
integer value in milliseconds, QLineEdit and TextInput will display
the last character entered unmasked for that delay period and then
mask the character as normal. If QT_GUI_PASSWORD_ECHO_DELAY is
not defined then the behaviour is unchanged.
Task-number: QTBUG-17003
Reviewed-by: Martin Jones
(cherry picked from commit f9e7aee2019d321edd655bfde7de43f20a106971)
Conflicts:
src/declarative/graphicsitems/qdeclarativetextinput.cpp
tests/auto/declarative/qdeclarativetextinput/tst_qdeclarativetextinput.cpp
Change-Id: I3683223189b7176e4ef5081ee315c95a0efb9cfe
Reviewed-on: http://codereview.qt.nokia.com/2060
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Andrew den Exter <andrew.den-exter@nokia.com>
This requires a fix for QByteArrayLiteral to work too.
Change-Id: I3c2a50ad431d5b0c014a341e675fa54e7b206e70
Merge-request: 27
Reviewed-by: Olivier Goffart <olivier.goffart@nokia.com>
Reviewed-on: http://codereview.qt.nokia.com/1967
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
The problem was that with an empty filename and index of 0, all raw fonts
loaded from data had the same FaceId, and we wouldn't bother to load
another one after doing this once.
This commit introduces a uuid in FaceId to help distinguish them in
that case.
Change-Id: I93655ff07a7d8856af1f854024e207c519f8ed1a
Reviewed-on: http://codereview.qt.nokia.com/1882
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Jiang Jiang <jiang.jiang@nokia.com>
This test was incorrectly assuming that a file named "Makefile" exists.
Also removing the `insignificant_test' mark for Linux.
Change-Id: I318b12f67e0476d6f08d1fc86194ca96f2bdb373
Reviewed-on: http://codereview.qt.nokia.com/1923
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
It was emitting signals from a thread for 15 seconds.
Doing this 10 times should be enough, and way faster.
Also a race made it sometimes wait 15 seconds while nothing was happening,
and then it would still succeed; the new code prevents this from happening.
Change-Id: Ib36785dd8090047c760ddcca44fc805efaef1bd8
Merge-request: 4
Reviewed-by: Olivier Goffart <olivier.goffart@nokia.com>
Reviewed-on: http://codereview.qt.nokia.com/1989
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Update the test after the introduction of QHostAddress::AnyIPv4
in 85136496bc
Change-Id: I3b84e85b6dcefa69bf5953205e288a6f0affb341
Reviewed-on: http://codereview.qt.nokia.com/1873
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Markus Goetz
Instead of using a simple INNER JOIN, like:
SELECT a,b,rel.c FROM table1, table2 WHERE (table1.smthing =
table2.smthing)
which doesn't show row where foreign keys are NULL, allow use of LEFT
JOIN like:
SELECT a,b,rel.c FROM table1 LEFT JOIN table2 ON table1.smthing =
table2.smthing
The trick works also for multi-relational tables.
Just remember to use the new API setJoinMode.
Signed-off-by: DaNiMoTh <jjdanimoth@gmail.com>
Task-number:QTBUG-8217
Reviewed-by:Michael Goddard
Reviewed-by:Charles Yin
Merge-request: 2576
Reviewed-by: Charles Yin <charles.yin@nokia.com>
(cherry picked from commit c4280dbd9bb37cca21d007f5f8b9217f80b44043)
Change-Id: I349f9418e4859923977942add59872b000cac2c5
Reviewed-on: http://codereview.qt.nokia.com/1853
Reviewed-by: Charles Yin <charles.yin@nokia.com>
In Qt 4.8 this generated a warning. For Qt 5 we should no longer
accept file urls without a scheme set. So you should use file://
for local files.
Change-Id: I57789e2b56b712aa4f370aec9437c6febf0d0211
Reviewed-on: http://codereview.qt.nokia.com/1822
Reviewed-by: Markus Goetz
These projects are conceptually not autotests, but more like helper
programs for the tst_selftests autotest. Some of them are expected to
fail, so they should not be run except via tst_selftests.
Change-Id: Iba8e4242e8dad9f92874ae690c9f4d9814758f4b
Reviewed-on: http://codereview.qt.nokia.com/1791
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This is meant to be a temporary solution to not hold any further
development. JIRA tasks might be filed for failing tests.
Change-Id: I08a5f5b0cb153e7fd7890b2936ec3bb6b3a0907c
Reviewed-on: http://codereview.qt.nokia.com/1753
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Makes the API symmetric with the other Lighthouse APIs.
Change-Id: I8a399f3c968ea35d4624711b31f2ac5bb94b7893
Reviewed-on: http://codereview.qt.nokia.com/1735
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Jørgen Lind <jorgen.lind@nokia.com>
According to UAX #9, bidiItemize should act as if those characters
don't exist. If we don't, dir and status.eor here may become
QChar::DirBN, thus interfere the result of bidiItemize.
Task-number: QTBUG-19949
Reviewed-by: Lars Knoll
(cherry picked from commit a5c3064439a9f1483565e5d9dfbf0342cd9236f0)
Change-Id: I224cfdf5b38433a31d33b6d944d5770accf74546
Reviewed-on: http://codereview.qt.nokia.com/1631
Reviewed-by: Jiang Jiang <jiang.jiang@nokia.com>
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
there is no such category in the Unicode specs. the QChar::NoCategory
was a subject of bugs since it was introduced. int 4.6 it's meaning was
limited to mention ucs4 > UNICODE_LAST_CODEPOINT only (which is useless anyways)
in order to preserve the old (wrong) behavior.
fix it now for qtbase
Change-Id: I630534824e071090b39772881e747c1fdb758719
Reviewed-on: http://codereview.qt.nokia.com/1584
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Currently it is only possible to verify a certificate chain when
connecting to a server. This change makes it possible to verify a
chain at any time.
Change-Id: Ib70ad7b81418f880e995f391b82ce59561ededb8
Merge-request: 11
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Reviewed-on: http://codereview.qt.nokia.com/1509
Similar refactoring as done for QString. Make
shared_null read-only, and add support for
compile time generated QByteArrayData.
Add support for properly reserving capacity.
Change-Id: Ie4c41d4caac7b3b4bb1aef40c1c860a30b82edb8
Reviewed-on: http://codereview.qt.nokia.com/1484
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Olivier Goffart <olivier.goffart@nokia.com>
RFC 2459 "Internet X.509 Public Key Infrastructure" uses the word
"attribute" for fields in a certificate like common name, organization
etc.
Change-Id: I51e595acbe3e146acf81af21cf48e554fa9490e4
Reviewed-on: http://codereview.qt.nokia.com/1453
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
Add methods that return a list of the tags in use in a certificate
issuer or subject. This means that unknown elements of these fields can
be accessed.
Change-Id: I588989e34f541b1d31cc9e97f5a85d1624ece1b1
Merge-request: 18
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Reviewed-on: http://codereview.qt.nokia.com/1451
This commit adds accessors for both the openssl version number and the
version string. The intention here is to aid debugging by making it
possible for applications to know which version of the openssl library
has been found by the runtime linking code.
Since the version of openssl in use will depend on the installation of
the developer, the test cases merely display the version string and
number rather than verifying that any particular version is in use.
Change-Id: Ieec44f0941f99887c85c2858bab0481722d739e5
Merge-request: 12
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Reviewed-on: http://codereview.qt.nokia.com/1406
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
In certain sandboxes, we have libQtDBus, but not D-Bus. QtDBus shouldn't
crash in that case, but return non-working QDBusConnection instances
instead.
Change-Id: Ia4ac78d1197bae50cde0cf07e6fc66fc25b85011
Reviewed-on: http://codereview.qt.nokia.com/1319
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Robert Griebl <robert.griebl@nokia.com>
Change-Id: I851e0b1c3f80a7b33a38cb1ab2665dc0f3c73adc
Reviewed-on: http://codereview.qt.nokia.com/1248
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dietrich-de@nokia.com>
Since the compiler cannod find the template argument if there is no
argument passed to the constructor, this effectively means there is
no default constructor.
Add a default constructor
Task-number: QTBUG-20256
Change-Id: I310d5e1f3f94a8fe69fd3a5c46f2f51bca60facd
Reviewed-on: http://codereview.qt.nokia.com/1165
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Denis Dzyubenko <denis.dzyubenko@nokia.com>
This reverts 518c2a58ed6fdfd7449cb4476aa8ea0d32ad16e3 which caused a
regression.
When writing systems are mixed and an underline is set on the font,
QPainter will set a pen with the current color and a new width on
itself before drawing the decoration. This would cause the recorder
in QStaticText to mark the pen as dirty, saving the current pen
color in all subsequent text items. The effect was e.g. that in QML
the cached color would override the current one, making it impossible
to change the color on the text without forcing a relayout somehow.
The right fix is to only mark the pen as dirty when its color actually
changes.
Task-number: QTBUG-20159
Change-Id: Ia819b67cccc9eaedd23fde655eab58cd892646f8
Reviewed-by: Jiang Jiang
Reviewed-on: http://codereview.qt.nokia.com/870
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
This removes various remains of historical test tools, and the entire
tests/arthur directory. The living parts are now:
tests/auto/lancelot - including the suite of qps scripts. The
script engine now lives here.
tests/baselineserver - moved to toplevel since not arthur-specific.
tests/manual/lance - for manual running and editing of qps scripts.
Change-Id: I7c7f5df9197f4984a918dd1f9b31f42ee80d6152
Reviewed-on: http://codereview.qt.nokia.com/895
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
Because of the merge of demos and examples all references to all demos
have to be updated. This is the update for the affine example.
Change-Id: I83f24010162a73e11786587365c6f10b51d4bf4b
Reviewed-on: http://codereview.qt.nokia.com/774
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: David Boddie
The remove will detach the string making the query pointer invalid.
Note: the "test3" case is commented out because it does not remove
the & at the end, and i do not want to enforce this behaviour in the
test
Task-number: QTBUG-20065
Change-Id: I195c5c3b468f46c797c7c4f8075303f2b1f4724c
Reviewed-on: http://codereview.qt.nokia.com/822
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
... change.
Add a new test for the support for repeated entries in the subject and
issuer. Fix the rest of the tests to pass with the new API.
Change-Id: I25fa84089e4aff5f15f53858171ce98b7fbf9dd7
Merge-request: 5
Reviewed-on: http://codereview.qt.nokia.com/798
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Modify all the tests to take the first entry in the issuer and subject
info.
Change-Id: Ia8e6f294ddc162afebc411b0f519bdeb7ea8fdba
Merge-request: 5
Reviewed-on: http://codereview.qt.nokia.com/797
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
This is supported by the others operator+
Change-Id: I9a1d1a0afb63acf32935948111d43ca6da370363
Reviewed-on: http://codereview.qt.nokia.com/764
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: hjk <qthjk@ovi.com>
This test broke with 37c329a.
(cherry picked from commit 4f46153bce807a5c178a60ce89c38fdd30d13f49)
Change-Id: I29d1ddd67827492cc916330199cc4c708ae676c1
Reviewed-on: http://codereview.qt.nokia.com/609
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This reverts commit 50a53d2f7a7e12cd597dc72a08ad62b79fee4554.
...which was required because of
69fc9e594e6d5da87bff42707973683f84b67c93
"Fix how subpixel positions are intepreted in an aliased grid."
which was reverted in f8e85838c5531b56c2175cbdb9c24db426f7fd89
because of 37c329a3e35fabc88fbcad824a69f37c671d2132
"New algorithm for drawing thin lines".
phew!
(cherry picked from commit 14bf7c3761efe208ce19047b8ddc3f811a63a437)
Change-Id: I16d672685efb1901927190c58ef1477c89d946c1
Reviewed-on: http://codereview.qt.nokia.com/604
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Some functions (such as QObject::moveToThread) did not keep
the event ordered by priority.
And because qUpperBound is used to add events, that mean new
events would not be inserted in order.
Task-number: QTBUG19637
Change-Id: I38eb9addb1cdd45b8566e000361ac6e5f1f2c2b8
Reviewed-on: http://codereview.qt.nokia.com/733
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Olivier Goffart <olivier.goffart@nokia.com>
OpenSSL versions 0.9.8 and 1.0.0 produce slightly different output when
dumping a certificate.
Change-Id: I2cf27213237a2e1e08f1b0345c29ca2cd441f41c
Reviewed-on: http://codereview.qt.nokia.com/555
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Martin Petersson <Martin.Petersson@nokia.com>
Adds support for binding "dual stack" sockets (via QUdpSocket or
QTcpServer). A dual stack socket will accept incoming connections on
either IPv4 or IPv6 interfaces.
QHostAddress::Any - use this to bind a dual stack socket
QHostAddress::AnyIPv6 - use this to bind a socket for IPv6 only
QHostAddress::AnyIPv4 - use this to bind a socket for IPv4 only
Binding to a specific address rather than one of the "any" addresses
is restricting you to a protocol anyway so no behaviour change there.
IPv6 sockets were previously dual stack on some OS and v6 only on others
Any previously meant IPv4 only
This commit implemented & tested on Windows 7, Linux (Ubuntu 10.04)
and Mac OS 10.6.7.
Windows XP and server 2003 do not support dual stack sockets, even though
they can support IPv6. On those versions, QHostAddress::Any will still
bind to IPv4 0.0.0.0 (which is also the behaviour anywhere QT_NO_IPV6 is
defined)
Autotests run:
qudpsocket (includes a new test case)
qtcpserver (includes a new test case)
qtcpsocket
qnetworkreply
qhostaddress
Task-number: QTBUG-17080
Change-Id: Id486677c4f832e18dc0ff1a86c5f5fc422c9eb4f
Reviewed-on: http://codereview.qt.nokia.com/421
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Thiago Macieira <thiago.macieira@nokia.com>
Reviewed-by: Markus Goetz
cb760eaef631abd49836ae5c8dc12a61ef5eff0d changed the way we generate
HTML for empty blocks. tst_QTextDocument::toHtml has to be updated
accordingly.
Reviewed-by: Samuel
(cherry picked from commit 2701802511d9c09a11212cc37838154245b0c0ca)
Change-Id: I0664557f9d74e1aacd46cfcf4cfa2cde4f21a719
Reviewed-on: http://codereview.qt.nokia.com/581
Reviewed-by: Jiang Jiang <jiang.jiang@nokia.com>
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Loads one of the test certs then compares the result with a known good
text version.
Change-Id: I3a0d6a7f60ce0f48e0cd8032c9964e9c4217dca7
Merge-request: 2
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
Reviewed-on: http://codereview.qt.nokia.com/552
Several autotests were assuming that Q_OS_MAC == Mac cocoa port, which
caused compile failures when QPA is used.
Change-Id: I4480ed815c15b6d9ce83edf0057b7293f2e3ad7e
Reviewed-on: http://codereview.qt.nokia.com/533
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
This test was forcing on release mode, which does not work if the user
requested to build Qt in debug mode only, and this affects the library
name (as on Mac and Windows).
Change-Id: I11111c0ffee11111111111111111111111111111
Reviewed-on: http://codereview.qt.nokia.com/532
Reviewed-by: Jo Asplin <jo.asplin@nokia.com>
On X11 QProcess would emit two started signals when calling
QProcess::waitForStarted(). We should expect that the private
implementation of waitForStarted() should emit the started signal
and return true or false appropriately.
Task-number: QTBUG-7039
Change-Id: I3d381399ab7a39bf57db03a110fa6747a4fc6a24
Reviewed-by: pending
Reviewed-on: http://codereview.qt.nokia.com/331
Reviewed-by: Thiago Macieira <thiago.macieira@nokia.com>
which leads to absurd statement (QBuffer::open() == !QBuffer::isOpen()) to be true.
also treat Truncate as (Truncate | WriteOnly) to satisfy lazy ones
Reviewed-by: Joao
Merge-request: 2612
(cherry picked from commit 6b91affb9a355e668bc9d06dee580d95230ac63a)
Change-Id: I657d4d0a33f7993313fe2a1a8ba408371991717f
Reviewed-on: http://codereview.qt.nokia.com/447
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
When QTextDocument exports HTML, it makes an effort to be compatible
with its own importer, hence it has to be compatible with the dialect
of HTML which Qt has developed over the years. One incorrect
interpretation in Qt is that an empty paragraph is interpreted as an
empty line. So if you use a QTextDocument to produce HTML for text where
an empty line has been added, this empty line will not be visible when
the document is viewed in a compliant browser. The fix is to set the
height of the empty paragraph to 1em, so that it will match the current
pixel size of the font, thus look the same as a <p><br /></p> but
without altering the structure of the document.
Reviewed-by: Gunnar
(cherry picked from commit f541c78e1bc5b293466b40e6f10496199a4a5d73)
Change-Id: Ic0eae2c81609b8872eb2eb9344a3ec416cd09149
Reviewed-on: http://codereview.qt.nokia.com/445
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
Fonts like "Helvetica Neue UltraLight" or "Skia Regular Black
Condensed" can't be selected in Qt because either they don't
report correct numeric values for weight/stretch/etc. or these
values are not mapped from QFont enums in a linear way. Thus
we provide a shortcut to select these fonts with PostScript
name or full name without resorting to family name matching in
QFontDatabase (these fonts are not registered in font database
anyway). After this, we can simply use:
QFont font("Helvetica Neue");
font.setStyleName("UltraLight");
to select these fonts. QCoreTextFontEngineMulti matched like
this can be created directly from the CTFontRef instance
instead of creating from the font name, making this process
faster.
The commit also cleaned up the font loading process in Mac
font database a bit, moving the code for family matching into
a separate function.
Add QFontInfo::styleName() and QRawFont::styleName() to access
the resolved style name for a font.
Task-number: QTBUG-19366
Change-Id: Iad07768c02ed06cc8d6b7395dec554384f410506
Reviewed-on: http://codereview.qt.nokia.com/333
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Jiang Jiang <jiang.jiang@nokia.com>
Regression was introduced by 8d4cd52b6981a4e6deea7fdb77f56e40c4f3e6ba
when it failed to check when msecs == -1. This manifested visibly in KDE
failing to connect to any SSL site -- kioslaves are synchronous and use
waitForXXX(-1) (in this particular case, waitForEncrypted, which calls
waitForReadyRead).
Also, take the opportunity to convert these tests in QTcpSocket to use
port 80 (a defined service in the test server) instead of port 22.
Reviewed-by: Martin Petersson
(cherry picked from commit cb5b6799333794496269aa7e6515f96c2ac96d37)
Change-Id: I256a1e138e43fd45844976fe84cd2bc938552e47
Reviewed-on: http://codereview.qt.nokia.com/359
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
To provide an optimized way of constructing QGlyphRun objects with no
copying or allocation, we add function setRawData() (naming inspired by
QByteArray::setRawData()). Data retrieved from QRawFont can be passed
directly into this. The logic is now that the data pointers in
QGlyphRunPrivate should always point to the current valid data and is
what will be used in comparisons and drawing calls. The vectors are
optimizations to avoid unnecessary copying if the user wants to use
the QVector based API (which makes it easier to manage the memory.)
This reflected in the functions that return QVectors, which will
return the stored vector if and only if it is identical to the
current pointer. Otherwise we will have to copy the memory.
The internal addition operators in QGlyphRun have been removed since
they really provide no real optimization and have an unclear definition
if the two glyph runs are based on different fonts.
Reviewed-by: Jiang Jiang
(cherry picked from commit 86d88c5b719fd3d50336d9d8e7127b8045ee82ae)
Change-Id: Id5bb55ee3d93afb32ffca850f53382e856df7b3e
Reviewed-on: http://codereview.qt.nokia.com/342
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
Those tests should be moved to QtScript/tests/auto
Change-Id: Icc0c50ef35ac08e604ab18cb87b0c2b19f2fc72c
Reviewed-on: http://codereview.qt.nokia.com/197
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Markus Goetz
Reviewed-by: Liang Qi <liang.qi@nokia.com>
Raster engine on Mac now correctly handles transformation, so no
need to XFAIL anymore. Also fixes a drawStaticText origin mistake,
the y origin should be the top left point rather than the baseline.
Change-Id: I6058e7099b336d9d5a6586344a07be3c7d76fb64
Reviewed-on: http://codereview.qt.nokia.com/329
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Jiang Jiang <jiang.jiang@nokia.com>
The BadMatch errors are generated if XSetInputFocus is called before the
window has been mapped, so we need to set a flag when we get the map
notify event.
We need to find out the closest element in the ligature to
the point we clicked (or tapped), currently we do this by
dividing the width of that ligature glyph evenly by the number
of characters it covered. We only support Common and Greek script
at this point, ligatures in other scripts are still handled as a
whole.
Task-number: QTBUG-19260
Reviewed-by: Eskil
(cherry picked from commit 5338d78aa9d80ddd2bcb21e6b22cd2cf1522a7d3)
Change-Id: Ic747e9458d561aca0848dcd1e8b94e0a23fd8189
Reviewed-on: http://codereview.qt.nokia.com/196
Reviewed-by: Jiang Jiang <jiang.jiang@nokia.com>
Following the RFC4122, provide the interfaces between QUuid
and QByteArray, they are simpler then toByteArray() and
relevant.
Thanks for the suggestion and brief code from Robin Burchell.
Task-number: QTBUG-19420
Reviewed-by: joao
(cherry picked from commit 06873e467d98ad60d827afae29500bf2ff783c03)
Change-Id: I4623ae3363f1d5affa45de73fac616bb67a9eaa1
Reviewed-on: http://codereview.qt.nokia.com/168
Reviewed-by: Liang Qi <liang.qi@nokia.com>
It doesn't need to copy anything when pos is after size().
Task-number: QTBUG-19164
Reviewed-by: Oswald Buddenhagen
(cherry picked from commit 8befc4982a32752e48c82cacbed045e7336a3569)
Change-Id: Iccac75842616f0d41e457e844a15d1a3ccfeb642
Reviewed-on: http://codereview.qt.nokia.com/164
Reviewed-by: Liang Qi <liang.qi@nokia.com>
This test uses private headers. Mark it as such.
Change-Id: Icb6463629e1414b9da5403d0e0d766d8a113bd57
Reviewed-on: http://codereview.qt.nokia.com/160
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
If a project uses "load(qttest_p4)" it doesn't need to add testlib to
the CONFIG or QT variables. If a project does not use
"load(qttest_p4)", it should add "testlib" to the QT variable.
Change-Id: If28353713ccdfe13612682e3e88dadebe2f2eefd
Reviewed-on: http://codereview.qt.nokia.com/159
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Some complex widgets might get a negatively sized rectangle when
calling QWidgetPrivate:setGeometry_sys_helper(), triggering a infinite
recursion. Normalizing the rectangle size before checking for size
change is enough to break this infinite recursion.
Task-number: QTBUG-17333
Change-Id: I4682c3088ea53fb9f28f746c8264f573b5284825
Reviewed-on: http://codereview.qt.nokia.com/156
Reviewed-by: Olivier Goffart <olivier.goffart@nokia.com>
Also disable tests with std::vector in c++0x as they do not compile
Reviewed-by: Joao
(cherry picked from commit 38d1b31006ecc83811bbb13e5a4182eac593a970)
Change-Id: I837f18f043b18410c1d93b9f1156acf729dad510
Reviewed-on: http://codereview.qt.nokia.com/144
Reviewed-by: Olivier Goffart <olivier.goffart@nokia.com>
QThread::isFinished() can return false after the finished() signal is
emitted, so test the event loop's timeout() function instead.
Don't compare prescan configurations, as these may be cached by the OS.
It was causing the test to fail on linux if run before any other network
test.
Reviewed-by: mread
(cherry picked from commit e2320ec17446dc6e851fcf4ea2d998177b0d8049)
Change-Id: I35d67294871a35e2e63619f4acb0c3c32caa5eea
Reviewed-on: http://codereview.qt.nokia.com/137
Reviewed-by: Markus Goetz
Test required updating due to ebc134db484eee31491836b619aad1ee86e3070e
Reviewed-by: Martin Petersson
(cherry picked from commit e46e32644720f0ddeb553b8a658c1711a4b5cdfb)
Change-Id: Idf3df633534a0d914bd22fd589a8c521eb426bc8
Reviewed-on: http://codereview.qt.nokia.com/139
Reviewed-by: Markus Goetz
QTEST_ACCESSIBILITY was always defined and only used in one autotest.
Code that uses accessibility features should be excluded if Qt was built
without accessibility rather than based on a define in the test
framework.
Change-Id: I3a517a579a51f536a0983b43bd99e86292026552
Reviewed-by: pending
Reviewed-on: http://codereview.qt.nokia.com/129
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
* 'master' of git://scm.dev.nokia.troll.no/qt/qtbase-staging: (21 commits)
Fixed line endings.
Update licenseheader text in source files for qtbase Qt module
New configure.exe binary
Add -qpa option on Windows
Use qglobal.h's VERSION number instead of hardcoded current version
More examples adjusted to Symbian and Maemo5. (cherry picked from commit a97b9620a584c9b1a2e006873183526b3d7e001e)
Doc: Added some details to the accessibility events API documentation.
Doc: Fixed qdoc warnings.
Doc: Fixed qdoc warnings.
Doc: Made an additional change for clarity.
Doc: Noted that the example will not work as expected with a mouse.
Doc: Fixed qdoc warnings.
Doc: Applying a pending change from previous merges.
Doc: Fixed qdoc warning.
Doc: Fixed qdoc warnings.
Doc: Applied pending fixes to API documentation.
Doc: Various fixes to documentation, some based on changes in master.
Doc: Added missing project and desktop files.
Doc: Documented the value returned when no field can be found.
Squashed commit of changes from the 4.8-temp branch.
...
* 'master' of git://scm.dev.nokia.troll.no/qt/qtbase-earth-staging:
QUrl auto test: include core-private headers
QUrl TLD: fix documentation file for "Add QUrl::topLevelDomain() ..."
Add QUrl::topLevelDomain() and move TLD table from QtNetwork to QtCore
Move Qt's copy of the Mozilla public suffix list from QtNetwork
to QtCore and use it to expose a new API function QUrl::topLevelDomain().
This function returns the section of the url that is a registrar-controlled
top level domain.
QtCore now exports a couple of functions to the other Qt modules: qTopLevelDomain,
a helper function for QUrl::topLevelDomain(); and qIsEffectiveTLD(), a helper
function for QNetworkCookeieJar.
The motivation for this new API is to allow QtWebKit implement a Third-Party
Cookie blocking policy. For this QtWebKit needs to know the element of the url
that is the registry-controlled TLD. Without this knowledge it would end up
blocking third-party cookies per host rather than per registry-controlled domain.
See also https://bugs.webkit.org/show_bug.cgi?id=45455
Merge-request: 1205
Task-number: QTBUG-13601
Reviewed-by: Peter Hartmann <peter.hartmann@nokia.com>
(cherry picked from commit 154402f56dcf8303a6ce601a52215226af8d31ba)
* 'master' of git://scm.dev.nokia.troll.no/qt/qtbase-earth-staging:
add auto test for SSL certificates containing utf8 characters
fix coding style for merge request re. utf8 characters in SSL certs
Use OpenSSL X509_NAME_ENTRY API to parse UTF8 subjectName/issuerName
Qt's Shift-JIS codec maps the characters 0x5c and 0x7e to unicode yen (0x5a)
and unicode overline (0x203e). ICU and (as it turns out) Symbian's native
Shift-JIS codec preserve 0x5c and 0x7e when converting to Unicode.
Qt's behaviour creates a problem when loading japanese web sites that are
encoded in Shift-JIS. When they reference external JavaScript files, those tend
to inherit the current page encoding (unless the character set is explicitly
specified). Consequently JavaScript tends to contain regular expressions (as a
built-in feature of the language), which in turn uses backslashes for escape
sequences. Therefore it is crucial that the encodings used to decode the script
preserve the ASCII range, i.e. do not convert 0x5c (ascii backslash) to
something else.
This patch corrects the behaviour of Qt's Shift-JIS codec to leave all
characters < 0x80 unaltered in the process of conversion to and from
Unicode.
Task: QTBUG-19335
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
(cherry picked from commit 8e321cd869da7ff1cf0168da41aa0246b44867cc)
* 'master' of git://scm.dev.nokia.troll.no/qt/qtbase-staging:
tst_qhostinfo: Fix IPv6 lookup detection on Windows.
Fix incorrect hardware address on systems without getifaddrs()
Make QHostAddress.toString() follow RFC-5952 for IPv6 address format.
Moved the QTcpServer test to init winsock before we use getaddrinfo.
Reviewed-by: Shane Kearns
(cherry picked from commit 0ccf01368adcabbb25958a55976083f72116a2d5)
* 'master' of git://scm.dev.nokia.troll.no/qt/qtbase-staging:
Remove mention of qt3support in makeselftest
Remove Qt3Support test data from lancelot test
Remove Qt3Support code from algorithms autotest
Don't link qt3support lib in QMessageBox autotest
* 'master' of git://scm.dev.nokia.troll.no/qt/qtbase-staging:
Remove Qt3Support code from QVariant autotest.
Remove obsolete test data
Remove Qt3Support code from QMenuBar test, part 2.
The data was already commented out and thus unused.
Change-Id: I234cea542bbacf429b6cb1fc0c9feec4f80e47e5
Task-number: QTBUG-19325
Reviewed-by: Rohan McGovern
qHeapSort and qBubbleSort were Qt3 functions that were replaced by
qSort. During modularization, the Qt3Support header containing these
routines (q3tl.h) was moved into the algorithms autotest, presumably
because that was the only thing that still included the header.
However, as these routines are not part of Qt5, they don't need to be
tested anymore. This commit deletes the q3tl.h header and the test
functions that tested it.
Change-Id: I52eed7b4b4db3bd671dc6dbd752642bc9e783c30
Task-number: QTBUG-19325
Reviewed-by: Rohan McGovern
This commit removes the four columns of test data that were only used
for testing Qt3Support features.
Change-Id: I93116b64ac49b0d6812595dfd58962ba8afbdad1
Task-number: QTBUG-19325
Reviewed-by: Rohan McGovern
Remove test data for Qt3Support functions from the QTextStream autotest.
The code that used this data was removed in an earlier commit.
Change-Id: I26e34cdefd47287c6992cf1d31276a40994c607c
Task-number: QTBUG-19325
Reviewed-by: Rohan McGovern
Follow-up to previous commit: remove the "_noQt3" suffixes on test
function names and the "_Qt4" suffixes on variable names.
Change-Id: I000e87357b025930b0065efc1d0de05c2cd07bba
Task-number: QTBUG-19325
Reviewed-by: Rohan McGovern
This warning is pointless as the user can anyway check if the color is
valid after making the call by calling isValid(). Using isValidColor()
could be used but it has a big performance overhead as validation then
needs to be done twice.
Task-number: QTBUG-19098
Reviewed-by: Erik Verbruggen
(cherry picked from commit a423ff5474b89028eeca95b254f5184311c8223b)
* 'master' of git://scm.dev.nokia.troll.no/qt/qtbase-staging:
Compile IPC tests.
Always call XInitThreads.
Remove redundant #ifdef's from benchmarks
Improve coding style of qdatastream test
Don't use Qt3Support in arthur test suite.
Remove Qt3Support code from QMenuBar autotest
Remove Qt3Support code from QSplitter autotest
Remove Qt3Support code from QSharedPointer autotest
Remove Qt3Support code from QComboBox autotest
Remove Qt3Support test code from accessibility autotest
tests: allow unstable tests to be marked with CONFIG+=insignificant_test
Expand literal tabs and format switch statements in accordance with the
Qt Coding Style.
Change-Id: I64e638b730f4be2bc707136b1b7e5585d6808731
Reviewed-by: Rohan McGovern
Note that the functions suffixed with a 3 were actually the Qt4
versions, which is why this patch looks strange.
Change-Id: Iec874153248f57b8696a289cb13eb60fecc5699c
Task-number: QTBUG-19325
Reviewed-by: Rohan McGovern
This commit removes the second-last column of test data
(labeled testQt3Support) of the insertItem test function.
Change-Id: I2158bdb5a77c9eaf1424998f51fb03a8df934490
Task-number: QTBUG-19325
Reviewed-by: Rohan McGovern
QWMatrix and QColorGroup were Qt 3 classes and QPalette is substantially
different in Qt 3 and Qt 4.
Change-Id: Iee176fcf237c3f9ac2ffd7f1fd9e4963dc4df39c
Task-number: QTBUG-19325
Reviewed-by: Rohan McGovern
* 'master' of git://scm.dev.nokia.troll.no/qt/qtbase-staging:
tests: fixed compilation of tst_qtextstream
QUiLoader, QAbstractFormBuilder: Introduce errorString().
Enable configuration for Xcb
Fall back to using paths for large fonts in drawStaticText()
Add ability to work around non-standard GLES implementations
Fix broken drawing with large fonts using QStaticText and FreeType
Remove Q_ASSERT's from qdbustype autotest
Remove autotest code for Qt3Support library.
Compilation of this autotest was broken by a strange qmake bug,
QTBUG-19393. Work around it by putting a space between two string
literals.
Change-Id: I494c486dd11858eeaf98d7a04021c74fcf3cbba7
In 4.8 we added support for using StringBuilder with QByteArray.
But this is breaking source compatibility for people that used
QT_USE_FAST_OPERATOR_PLUS in Qt 4.7. So we introduce a new macro
Notice that QT_USE_FAST_CONCATENATION was not working without
QT_USE_FAST_OPERATOR_PLUS, so we remove the checking of that macro.
Reviewed-by: joao
(cherry picked from commit 8447f5616be731d78081f326bb9cb3f5aa9087a4)
This commit deals with the simple cases -- mostly just removing blocks
of code enclosed in #ifdef QT3_SUPPORT. Later commits will deal with
the trickier cases.
Change-Id: I280dea25b3754be175efe62fc7e5e4e7c304e658
Task-number: QTBUG-19325
Reviewed-by: Rohan McGovern
This test can't use svg files as QtSvg is a separate module, on which
qtbase does not depend. This commit changes the test to use a pixmap
that was already present in the test.
Change-Id: Iab4ce70aa376a7d2985b69816bd251ce4f5d46cf
Task-number: QTBUG-19244
Reviewed-by: Rohan McGovern
Using Q_ASSERT does nothing in release-mode builds, and in debug builds
it causes tests to terminate prematurely. It is much better to use
QVERIFY or QCOMPARE.
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit 3475168550c1a804f04f2a4edfeb30c04cd36551)
Change-Id: Ic39972b685ca35a9a71d9c8d03e8dae31481fb19
Report a fatal error rather than ignoring the error in non-debug builds.
Change-Id: Ib6ef993e6e0c65bd9adea994ea7b454cc147f3d4
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit 637456edef085d1825f15429cd921f2f0d4bd6a2)
Rather than aborting in debug builds and failing mysteriously in release
builds, report fatal errors in all builds.
Change-Id: I020b06e19b7ffc8ae4413e1756259f4ca608f253
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit bbfefe1b764cd41b7e677f26621fb6e76a67f9d7)
Report a meaningful fatal error if an unknown token type is encountered
rather than ignoring the error in non-debug builds and reporting an
uninformative message in debug builds.
Change-Id: Id219f3c7cbd4ba3e9875cb81f833720d5d153132
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit 1c85fc559ee456a165527d23cb1b7dc237f5504b)
Report fatal errors rather than ignoring them in non-debug builds.
Change-Id: I62dd177e2f391e64c12314bf224f8952ed6f3144
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit 4793c3bd1dfddcc98eae12e5caf29ff6aabd31b2)
If populateTestData() would return an invalid model index, report a
meaningful fatal error rather than failing silently in a release build
and aborting with an uninformative error message in a debug build.
Change-Id: I96820429a25ce5c4eb375d50e7e1f672851e26e6
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit 984a72a8bbf853059f0eb7e1054538b48d5f3bc8)
Report fatal errors rather than ignoring them in non-debug builds.
Change-Id: Ieafc58f3603fa953f4a963394039e613dcd442fb
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit 6e3fcd6ff50e6435fd90629ed695196d25312ffc)
I missed one Q_ASSERT in the previous commit. Also changing to use
Q_FUNC_INFO instead of hard-coded function names in the warning
messages.
Change-Id: I0ff5b2b2cda02597836beb5d2811fa8dd2a344ab
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit 74a4aad171b39018d596b99684286b9426a091a5)
Report a fatal error rather than failing silently in non-debug builds.
Change-Id: I625c5aa6f86a5764cd8f078baa074d6475a67736
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit c0c7e04c9248ce38278aceefeb527f29149cfb4e)
The tryWriteLock testfunction didn't do anything useful in non-debug
builds, due to the thread having the important code inside Q_ASSERT's,
which are no-ops in non-debug builds. This commit removes the
Q_ASSERT's, counts the number of failures in the thread and fails the
test if there are any failures recorded.
Change-Id: I4750f66eeba22ab51ba348ebc06704052421f1ae
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit 00f724c943b83f10f9ca9475570708536947538e)
Rather than aborting in debug builds and failing silently in release
builds, report a fatal error in all builds if the helper class
methods are called more than once.
Change-Id: Id1fda8dc7caf008bbc8f6ae6384abee1aa8f50eb
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit 0c157af3e5aa7c56c53b9eabe1510cc639610969)
Rather than aborting in debug builds and failing silently in release
builds, report a meaningful fatal error in all builds.
Change-Id: I3b874f187d482e9785a839cab1a3855b631404c3
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit 844906474dd6905d36003143a03a2fbccf0ad0dd)
Rather than aborting in debug builds and ignoring the failure in release
builds, report a fatal error in all builds.
Change-Id: I1fb8e692c65cf23cf5d2453173db742260ddca48
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit 136f39bbb63706819eb18d000f305edbe1cc6a81)
Don't perform actions needed for the test inside Q_ASSERT, because these
actions won't happen in a non-debug build.
Change-Id: I0758e9f29f38c1a83a1501357286877f05beb6c8
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit b7d421da6d5e945b74ffbc3a7aa635a6ce63ebda)
Don't perform actions needed for the test inside Q_ASSERT, because these
actions won't happen in a non-debug build. Instead count the number of
failures and verify that the count is zero at the end of the test.
Change-Id: Ibe0d194111e5247118d59a7760f0946d2c44faf9
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit 8d2127d44e6c8af6b041688376de0e5747a1810a)
Replace Q_ASSERT in helper class with code to count failures and report
meaningful warnings. The test function then fails the test if any
failures were recorded.
Change-Id: I0d6650e6036c8e45729c16d1dbb7543b4fb42553
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit 8512dc16553ecf511c40a2ba7a815f777d7d5c59)
Rather than aborting in debug builds and failing silently in release
builds, report a meaningful warning message and return an appropriate
value to indicate the error.
Change-Id: I0ceb0a0bfaef34cc6127d768cc75ecfc5a24e3c9
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit 7cb0a3baeb361c9909e8ab2caf436e8e44b6a3b6)
If populateTestData() is passed an unknown type of model, report a
meaningful fatal error rather than failing silently in a release build
and aborting with an uninformative error message in a debug build.
Change-Id: I7ee8d1262bbced304f9f24c2ec9b40a38704d982
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit 6b2e89843a573cd7c143bca17cec8e69209d2fbd)
Report a meaningful warning message rather than aborting in a debug
build and failing silently in a release build.
Change-Id: Ic77589143ff0d22c95c7b10f2e511f68b3da4d86
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit 75767c69fbba3149a4505287ed441886188a9fd3)
Rather than aborting in debug builds and failing silently in release
builds, report a meaningful warning message and skip setting the
filename, which should cause a subsequent test failure.
Change-Id: I3ae4f4de7b02bf2194019047fa87d8ae06d95634
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit e6f7509f18ae88069373d59073cbdcda88fd19c8)
Rather than aborting in debug builds and ignoring the failures in
release builds, report specific warnings on each failure, count the
failures, and fail the test if the failure counts are non-zero at the
end of the test.
The same change is also made for a QCOMPARE that appeared
inappropriately inside a helper class. QCOMPARE may only appear
directly in a test function.
Change-Id: I81f0ce80512fa72c67f5aa72c0511a4b650d5d20
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit 11254ff409395b67cb28453b3c069860bc28c14d)
Report an informative fatal error if passed a null model, rather than
aborting in a debug build and giving a bunch of signal connection errors
in a release build.
Change-Id: Ia240e741b9d6ec03fd5ed3a14cf4fa44b55af911
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit 841cc610df61a266ebcca2bfef2542a7d4fea68d)
Report a fatal error in all builds, not just in debug builds.
Change-Id: Ia9e265b2082b55fbac18ca046e586de863ac0623
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit 22e99d92a71645d643ebd54c6209bced80f7c5b8)
Rather than aborting in debug builds and ignoring failures in release
builds, report meaningful warnings into the test output and return
sentinel values that will cause QVERIFY/QCOMPARE of the returned values
to fail the test.
Change-Id: I2c5a820637337d0762c71db10a4f270d36b31662
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit 524bd6b7120f70a178b03bc6d337e08abd327076)
Convert Q_ASSERT to QCOMPARE and remove mention of Q_ASSERT in comments
to make it easier to check for unwanted Q_ASSERT's in the future.
Change-Id: I7ae250428d4d5682806e724a7207523e65cd9851
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit 3290dd0d3563310f6bdbabf74105367bd8c611d3)
These assertions were made obsolete by the previous change to this test.
Change-Id: I3156b273a727f753a6c093c8fc7453b694c777ee
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit 57f6ed6664f55ccee62b81750a2b3520249503fd)
Rather than aborting in debug mode and doing nothing in release mode
when the invariant is violated, count the failures and fail the test
gracefully.
Change-Id: Ie193460c478ddde540b6b15aafdce32f471b4b2b
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit f18e0e01468899731bc3777649d69fd6d0041012)
If the test data is incorrect, print a meaningful warning into the test
output.
Change-Id: Ibfe64ef41a0ff3eb47c2385d1c31191334a675a8
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit 28ccfa472991c0480e67b5f204a567c4023ba6d4)
Report a fatal error in all builds, not just in debug builds.
Change-Id: Iad990e2d3b29a55e995254d466e967a4a722bb23
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit a212b402da4b4af9d453fa96dbfa2d32271e857d)
Rather than aborting on a bad gesture event in debug builds and ignoring
the error in release builds, record a count of bad events and fail the
test if the count is non-zero at the end of the test function.
Change-Id: I6ddd46a5a656185c13eae4bbbb496b986a0c92f6
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit 5953d930bc07fa6734a11d053d26a3f80e9c1e89)
Issue a meaningful fatal error in preference to aborting in debug mode
builds and crashing in release mode builds.
Change-Id: I7bb04e1e222fd6167be19b5d88caac27b43d88df
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit cb126ff7ad08e9801e2911511aa9aeb728faa8f3)
If the test data is incorrect, print a meaningful error message into the
test output.
Change-Id: I505a86b4411619d3c3be9541c96c082f92589ff7
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit 8e12d9e322ec7d8f7eece09b6f15cba640615f9e)
Report a fatal error in all builds rather than only in debug mode
builds.
Change-Id: I6b3a999dd3ccf00ae66a86b43c125d7082cf0ae5
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit c183540c6c244f327ebd834167799072dcc3b72d)
Report a fatal error in all builds rather than just in debug mode
builds.
Change-Id: Ie54e55ea2dd13bbb12e4265278db832ac1297c28
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit 8a1279b0ae180fae94d3da1a4eeb20df5a748d33)
Verify the success of setting the document content in the test function
rather than using Q_ASSERT.
Change-Id: I25e017e7f92803867a998b4f09ad9f717212a9bc
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit d7453aef14b80a5972909ed99f1b4c765b7436a5)
Report a fatal error in all builds rather than aborting in debug mode
builds only.
Change-Id: I53b348f077c6533433e32bbebd159066a2bc2c37
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit 4f818b8bcf51cf9c654edbf319d90f6c77a09b3e)
Report a regular test failure rather than aborting when an unknown
operation is requested.
Change-Id: I3678f42f9e9f895d8d0d49a768d4c8b575d1863f
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit 22aa68ecec96da4d14a4c9fe2f6e4a337b13b4a3)
Combine the two checking functions (check and checkInvariant) and have
the resulting check function return a bool instead of asserting so that
the test function can QVERIFY and fail gracefully.
Change-Id: Ib069b5424483ba6ffb9caf75036c4f325e9dba51
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit a54900d2227bfb2021c5d1255817824aff11cf32)
This will make it easier to check for stray Q_ASSERT's in the future.
Change-Id: I5ddafe1bf26819566460920deae8ff448008c93f
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit b2db13f245f09f1d14af64d2199284c78cbb5b6e)
If the <dummy> tag can't be found in the data, return an empty string
rather than asserting, so that the test fails gracefully.
Change-Id: I536f08c9c3e942817680849d96d035999d4994db
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit a88dd1c5f62b5ded8ea0d76d185127ef28549c72)
If the test data is incorrect, print a meaningful warning into the test
output instead of deferencing an iterator beyond the last element in
the list.
Change-Id: I7be4f282639453de6d8240a2f17253025b415337
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit f01e2a5024db69913aed016e2854b2589ca85080)
Make the server thread exit early if the socket is invalid. This will
make the test fail gracefully instead of crashing.
Change-Id: Ia9564c94dd32d65e6e9bdb4a2410f1512409546c
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit b9b3ced2eafe13e491d5af5ad7432733941bfd8d)
Conflicts:
tests/auto/qsslsocket/tst_qsslsocket.cpp
Report a meaningful warning message into the test output rather than
aborting in debug mode and doing nothing in release mode.
Change-Id: I6883fccbce0139c763f36f6839bb3452d8f69c1c
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit 5b86c4abc676b36d60e6625e89535e7f4907d2b3)
The Receiver class has two slots that aren't meant to get called during
the test (they're there to catch broken parsing of slot names). Rather
than asserting when one of them gets called, which does nothing in a
release mode build, this commit makes the slots record the number of
times they were called (as for the other slots in the test) and fails
the test gracefully if either of those slots was called.
Change-Id: Ia0393026cb96ffdc6190b5e7bd951f75d231b11e
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit 7bd6ca895e5fa4de197d9d7bf2e7b578c01c3c2a)
Instead of asserting in debug mode and doing nothing in release mode,
put specific warnings in the test output and fail the test gracefully.
Change-Id: I453a0ab7ddef5b2acf55f77f71a59a940d93ae54
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit a3b2fa3f1beffa7709c11522d4e2db9ec8f952e0)
Issue a helpful warning rather than ignoring the error in release mode
builds.
Change-Id: Iea7bf4d63f8227abaf7dcf1700c5fef62763afad
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit 6f082a3fdd368cd7a969b7f324354583d081da82)
Allow createView() to return a null view on failure (which it already
did in release mode builds), but fail the test gracefully instead of
crashing when a null view is returned. Also reordered the code slightly
to put all the QFETCH's together.
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
Change-Id: I3a41c738cb0e4e860db2342b30817a804b20f30d
(cherry picked from commit 51b1d8dc20a2557d2002550b03e5b9f37f425fb4)
Allow createModel() to return a null model on failure (which it already
did in release mode builds), but fail the test gracefully instead of
crashing when a null model is returned.
Change-Id: Iaa0ec31183e0c90fcea512223d01e07ed188a380
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit 0d773d839e39f4f4bfd0bf9d652e4f2650adfcb0)
Q_ASSERT will only catch a violation of the precondition of the
checkReverseDirection function in a debug build. This commit replaces
the Q_ASSERT with QVERIFY'ing the precondition (that the widget has a
layout) before calling the function.
Change-Id: Ibaa2b52b7d67fa20784e0df022e8c8169da0e50e
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit d1011fc9328fa335bc69a065b29e77ce60608c55)
Sanity-check the test data when using it rather than when creating it.
Change-Id: Ie5d5e1ff3fc439d196096f17cb6f97680927a90c
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit 2c64404e2edd3b792b8a1d04c773860d40c04c4c)
Fix regression introduced in 3ca51d87296bcb3098d7de14294fef9294fd5ed4.
The warning is only generated in builds where QT_NO_DEBUG is not
defined *and* the target is not Mac OS X.
Change-Id: I7245f2eab8ea47ab7495fef874b2f8a29186b659
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit 60e5ed805af1e11aaec426b823df209b4c895c29)
Make the meaning of the code more obvious and avoid a compiler
warning about the variable "w" being overridden.
Change-Id: Ib76d3aa1cae46e263b2ab61b675d9ef74032aacc
Reviewed-by: Rohan McGovern
(cherry picked from commit 59634e825f1efa6f32befc8767cafedfeb9b7d59)
The function generating data blocks was filling the block to 16 bytes
short of the blockSize, then appending three 8 byte values, causing the
block to grow 8 bytes beyond blockSize and then truncating it back to
blockSize.
This commit makes the code fill the block to 24 bytes short of the
blockSize, so that the block will always end up at the correct size and
truncation is not needed.
Change-Id: I9fe6e6d6cf7bc445513b53e0a910d205c4c8002f
Reviewed-by: Rohan McGovern
(cherry picked from commit b1eb564830ff1b754de14919ce5c1547e9758f7c)
The Q_ASSERT here should really be a QVERIFY. Expanded the trivial
helper function to make it more obvious what the test does.
Change-Id: Ia6017fe820a83b4d6101e5edcfcb68993eef233a
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit 6181805f9ea66b37ee164bd67bdac2ac9d53fb65)
The assert and the last four parameters of makeList() are not needed.
The function is always used to make lists of three integers and the data
are all >= 0.
Change-Id: I93ae5a5f541cde2ff61bd9dd21164ed4a9b57403
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit e754832eff8e1a35fc2681ae69b6e3b1ad666ddb)
This code would assert in a debug build and potentially crash in a
release build. (The behaviour of QStringList::at() with an out-of-bounds
index is undefined.) This commit makes the program exit with a useful
error message in all builds.
Change-Id: Ia57a2e5693eb25d3eb0b9ba701ed485dfbc1e846
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit 5a530f6171a9569d1a35cd8cd1015ec796b048cc)
If a combobox had no completer, this test would assert in a debug build
and crash in a release build. This commit makes the test report a test
failure and avoid terminating in all builds.
Change-Id: Ib2924412e3d55f10875675cb65079259cd4ef552
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit a5bd4abed834ce3670b2f28d4f932d612a033b36)
Fix regression introduced in 3ca51d87296bcb3098d7de14294fef9294fd5ed4.
The warning is only generated in builds where QT_NO_DEBUG is not
defined.
Change-Id: I9aa3db369094f4046062b5dc1dc694342208ee45
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit 67bc4990f7541cca089882a8c3be1b2b8d98cd4c)
Replace obscure failure on bad test data in debug builds with an
informative warning in all builds.
Change-Id: I9001820f34de2f78bf296a2f0e095ce73d9ac4bd
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit 34c077faae538adc12d4aa28113640570dfc8728)
Some code in these tests is not intended to be executed, but rather to
detect compiler warnings. Instead of having an obscure fatal error if
this code is run in a debug build, it now has a clear fatal error if run
in any build.
Change-Id: I1c9d27bb14ebf3313865b68e3e57668ba1d14e25
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit 70f42ced8e01ddf0098b143e5804c22d55ebf16f)
Only build the autotest when the feature to be tested is in the Qt
build. This is better than building and running an empty test.
Change-Id: I67721f5f48296afcca64f761d12325f8e040f2d8
Reviewed-by: Rohan McGovern
(cherry picked from commit cf911bc0d297ed30e615fd115b0d3ae574cb2412)
Conflicts:
tests/auto/qaccessibility/tst_qaccessibility.cpp
Instead of crashing when we can't get a QAccessibleInterface for a
widget, output a useful warning and return a value that makes the test
fail gracefully.
Change-Id: I0b292cdd8f5a59e26bdc9b0b67cea2b58591df7d
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit d8dc5bfdff25d72e8276c6e80080d72315abe7e0)
Make the test report a useful warning, rather than terminating with an
unintelligible assertion failure, if the GestureState enum is ever
extended.
Change-Id: Ib876a5f2986cbea4e181678a83a72e0d1444f1ee
Task-number: QTBUG-17582
Reviewed-by: Rohan McGovern
(cherry picked from commit ed5dd84582881bc30a5ce85902b37aae9c243978)
Sort test data alphabetically and remove excess whitespace.
Change-Id: I0e244efca9e9adbe747a375a28a63f70992ef4f8
Reviewed-by: Trust Me
(cherry picked from commit 10f3f270c8a319205590ae13bdeab063d5216441)
This test relies on some API specific to MSVC's debug runtime, which is
not always guaranteed to be available.
Change-Id: Ib0ae4694ad51f59198dadfce802f0dfdf0522002
Reviewed-by: Rohan McGovern
(cherry picked from commit 01dfb9ca25bfaec5784f404dcd4bf41bbc2b6fcb)
Re-enabling for object types that don't crash the test.
Change-Id: I8c2f0d02171c973bf1ede227d4139b52cac5939f
Reviewed-by: Rohan McGovern
(cherry picked from commit 3788a90338e9328710b9d3335a63fb85ab7d97fc)
Fixes warning from tst_maketestselftest about test class name not
matching TARGET.
Change-Id: I7a81d87bb64d2902e842d097248e33eacb388746
Reviewed-by: Rohan McGovern
(cherry picked from commit 069e4441f2e14a82b4ae39601734acb71c909bd9)
Re-enable this test, with the two test functions that fail on Linux
disabled until the failures can be diagnosed.
Change-Id: I915e1a0d675cb71a80086e89f9799a4f9f6b600c
Reviewed-by: Rohan McGovern
(cherry picked from commit ee55dec1efe9c67518bf3e27f81b0696075f7153)
With modularized Qt, using QT_CONFIG is dangerous, because the behavior
changes depending on the order in which modules are qmake'd.
For example, an autotest doing:
contains(QT_CONFIG,svg):QT += svg
...will depend on libQtSvg if (and only if) the autotest is qmake'd
_after_ qtsvg is qmake'd.
This makes the tested functionality unpredictable.
Also, if the above example occurs within qtbase, it causes the test to
sometimes have a circular dependency: if qtsvg is qmake'd before the
test is qmake'd, the test in qtbase depends on qtsvg which depends on
qtbase.
Tests must avoid functionality tests via QT_CONFIG except where all the
tested modules are dependencies of the current module.
Usage of QT_CONFIG with qt3support was entirely removed since Qt5
will not retain qt3support.
Reviewed-by: Jason McDonald
Change-Id: I5a5013b3ec7e1f38fb78864763c9e7586c15e70b
Recursive QMAKE_EXTRA_TARGETS were omitting the `-f' option to make.
This would break in the case where the correct makefile was not named
`Makefile'. The included autotest demonstrates the problem.
Note that this was fixed for normal targets back in 2005
by faac7bd178654fd67a6f3f9cf4f6f2605071448d (p4 202370), but was not
fixed for extra targets.
Reviewed-by: ossi
(cherry picked from commit 96a3bf7a8bbc1e5361e16cbeeceb4be674b88c30)
(It did not really fix the issue.)
This reverts commit 33f525e636ef8fa64a15d3e66c56adaea0075bda.
Conflicts:
src/gui/graphicsview/qgraphicslinearlayout.cpp
tests/auto/qgraphicswidget/tst_qgraphicswidget.cpp
(cherry picked from commit fee052e3e37b3335fe563cb8a1881bf59f9e25d0)