Both normal and relaxed constexpr are required by our new minimum of
C++17.
Change-Id: Ic028b88a2e7a6cb7d5925f3133b9d54859a81744
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
QString's fromUtf16() prefers char16_t data over ushort.
Change-Id: Ib20c5afa09ceabb4e91fe434b6a057edb4739a53
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
‘t’
Specifies that the argument is a ‘ptrdiff_t’.
This modifier was introduced in ISO C99.
We use qsizetype, which is the same width as ptrdiff_t, so it makes no
difference in va_arg().
Change-Id: Iea47e0f8fc8b40378df7fffd16255730109413a5
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The tests are testing deprecated functionality, which we
still want to test.
Change-Id: Iad6ed35800896170c17fe019c7a6ecda22398ac3
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Since 5.3 joining() and old Joining type
Replaced by JoiningType joiningType()
Change-Id: Iefee50aaf94cec6d67b5fc004b3e68357b2015c5
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
This only arises when the system locale tells us to use its zero as
our zero digit, since no CLDR locale uses it by default. Adapt an
MS-specific QLocale::system() test to use Suzhou numbering, so as to
test this.
While updating the locale-restoration code to also restore the digits
being set in that test, add restore code for the long time format,
where previously only the short time format was restored. Add a
comment to make it less likely one of those shall be missed in future.
Fixes: QTBUG-85409
Change-Id: I343324bb563ee0e455dfe77d4825bf8c3082ca30
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Read three more values from CLDR and add a byte to the bit-fields at
the end of QLocaleData, indicating the three group sizes. This adds
three new parameters to various low-level formatting functions. At the
same time, rename ThousandsGroup to GroupDigits, more faithfully
expressing what this (internal) option means.
This replaces commit 27d1391280 with a
fuller implementation that handles digit-grouping in any of the ways
that CLDR supports. The formerly "Indian" formatting now also applies
to at least some locales for Bangladesh, Bhutan and Sri Lanka.
Fixed Costa Rica currency formatting test that wrongly put a separator
after the first digit; the locale (in common with several Spanish
locales) requires at least two digits before the first separator.
[ChangeLog][QtCore][Important Behavior Changes] Some locales require
more than one digit before the first grouping separator; others use
group sizes other than three. The latter was partially supported (only
for India) at 5.15 but is now systematically supported; the former is
now also supported.
Task-number: QTBUG-24301
Fixes: QTBUG-81050
Change-Id: I4ea4e331f3254d1f34801cddf51f3c65d3815573
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
During review of a refactor (coming shortly), Thiago wondered what the
magic numbers were. On closer examination, I concluded that they were
wrong and wrote some tests to prove it. This commit adds those tests;
replaces the misguided old code with something that passes them; and
documents the reasons for the various parts of its decisions.
In the process, tidy up QLocaleData::doubleToString() somewhat and
rename some of its variables to conform to Qt coding style.
Change-Id: Ibee43659b1bdb0707639cdb444cfe941c31d409f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The issue has been introduced when refactoring QByteArray::count
implementation (see 631127126c).
Because the last argument of QByteArrayMatcher::indexIn() method
has a defult value, it has been compiling without issues, but was being
called with incorrect size parameter. Fixed it to pass the length of the
input data correctly.
Change-Id: Ic9c2f33733131ec17276aa889f2d7ea40ec79b01
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Use pro2cmake with '--api-version 2' to force regenerate
projects to use the new prefixed qt_foo APIs.
Change-Id: I055c4837860319e93aaa6b09d646dda4fc2a4069
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Created a QByteArrayView in symmetry with QStringView.
Added the basic tests symmetrical to QStringView tests.
Moved the implementations of non-modifying methods of QByteArray to
namespace QtPrivate, to be reused inline from both QByteArray and
QByteArrayView. Changed QByteArray's counterparts of those methods to
take QByteArrayView as argument instead of QByteArray. Removed
QByteArray's operator QNoImplicitBoolCast(), because it was causing
ambiguity when calling those methods with QByteArray argument (it was
there to perevnt if(!ba)/if(ba) from compiling, but currently that would
be ambiguous and won't compile anyway).
[ChangeLog][QtCore][QByteArrayView] New class.
Task-number: QTBUG-84321
Change-Id: I05f92e654cf65c95f2bb31b9c9018746ac110426
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Created tst_QByteArrayApiSymmetry test for the common APIs of
QByteArray and QByteArrayView. Moved the tests for startsWith(),
endsWith(), indexOf(), lastIndexOf(), compare(), from tst_QByteArray
to tst_QByteArrayApiSymmetry and adapted them to check different
QByteArray/QByteArrayView combinations. Added tests for first(),
last(), sliced(), chopped(), chop(), truncate(), count(), contains()
(test inputs are taken from corresponding tst_QStringApiSymmetry
tests).
Task-number: QTBUG-84321
Change-Id: I4e712b1692e3c1271d51ddcda6c9eb8bb01e11d4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This is required to remove the ; from the macro with Qt 6.
Task-number: QTBUG-82978
Change-Id: I3f0b6717956ca8fa486bed9817b89dfa19f5e0e1
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
After API discussions, agreement was that from(n) is a bad name
for the method. Let's go with sliced(n) instead.
Change-Id: I0338cc150148a5008c3ee72bd8fda96fb93e9c35
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Also adjust qCalculateBlockSize() to be able to handle large
allocations.
QVector::length() is currently still limited to 2G items, that will
get changed in a later commit.
Change-Id: I3a92fbfd7f281d30844c5fafa3b9a474bc347c19
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Remove the last places where those got used and avoid
allocations when we resize to 0.
Change-Id: Ib553f4e7ce7cc24c31da15a55a86d18bdf1cc5c3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As a side effect, data() can now return a nullptr. This
has the potential to cause crashes in existig code. To work
around this, return an empty string from QString::data()
and QByteArray::data() for now.
For Qt 6 (and once all our internal issues are fixed), data()
will by default return a nullptr for a null QString, but we'll
offer a #define to enable backwards compatible behavior.
Change-Id: I4f66d97ff1dce3eb99a239f1eab9106fa9b1741a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The functional style interface is nice, but does feel alien in some
contexts, so better also have explicit encode and decode methods.
Change-Id: Ic07ced15f65cdb3a7f1cf044041e341d2ef87f79
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
[ChangeLog][QtCore][QByteArray] Remove method overloads taking
QString as argument, all of which were equivalent to passing the
toUtf8() of the string instead.
Change-Id: I9251733a9b3711153b2faddbbc907672a7cba190
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Add overloads for qMin and friends where the arguments are of different
type, but one can be easily promoted to the other. Return the promoted
type. Promotions are only allowed if both types are either signed,
unsigned or floating point numbers.
This should simplify writing code in many case (as for example
qMin(myint64, 1)) and also help reduce source incompatibilities between
Qt 5 and Qt 6, where the return types for sizes of our containers changes
from int to qsizetype.
Change-Id: Ia6bcf16bef0469ea568063e7c32f532da610d1cd
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use the overload-with-template trick from P1423 to avoid ambiguities
when existing callers pass 0 or nullptr.
Add a qdoc-ignored macro to hide the fact that the overload is a
template.
[ChangeLog][QtCore][QString] Added char8_t overload of fromUtf8().
Change-Id: Iaa2d365bfa161ef36cc73fa3bad50aabf34d01db
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
* Assume UTF-8 on all Unix like systems
* Export some functions to be able to compile QTextCodec once
moved to Qt5Compat.
Task-number: QTBUG-75665
Change-Id: I52ec47a848bc0ba72e9c7689668b1bcc5d736c29
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
There is no reason for keep using our macro now that we have C++17.
The macro itself is left in for the moment being, as well as its
detection logic, because it's needed for C code (not everything
supports C11 yet). A few more cleanups will arrive in the next few
patches.
Note that this is a mere search/replace; some places were using
double braces to work around the presence of commas in a macro, no
attempt has been done to fix those.
tst_qglobal had just some minor changes to keep testing the macro.
Change-Id: I1c1c397d9f3e63db3338842bf350c9069ea57639
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The recently-added slice() method has the problem that it's a noun
as well as a verb in the imperative. Like std::vector::empty, which
is both an adjective and a verb in the imperative, this may cause
confusion as to what the function does. Using the passive voice form
of slice(), sliced(), removes the confusion. While it can be read as
an adjective, too, that doesn't change the meaning compared to the
verb form.
Change-Id: If0aa01acb6cf5dd5eafa8226e3ea7f7a0c9da4f1
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Add QStringView overloads where they were missing. This keeps things
almost 100% source compatible.
Task-number: QTBUG-84319
Change-Id: Ica8ee773b2ce655e9597097786117959e34b236e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QString and QStringRef did bounds checking for left/right/mid, whereas
QStringView was asserting on out of bounds.
Relax the behavior for QStringView and do bounds checking on pos/n
as well. This removes a source of potentially hidden errors when porting
from QStringRef (or QString) to QStringView.
Unfortunately, one difference remains, where QByteArray::left/right()
behaves differently (and somewhat more sane) than QString and
QStringRef. We're keeping the difference here, as it has been around
for many years.
Mark left/right/mid as obsolete and to be replaced with the new
first/last/slice methods.
Change-Id: I18c203799ba78c928a4610a6038089f27696c22e
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
These methods are scheduled as a replacement for left/right/mid()
in Qt 6 with a consistent, narrow contract that does not allow
out of bounds indices, and therefore does permit faster
implementations.
Change-Id: Iabf22e8d4f3fef3c5e69a17f103e6cddebe420b1
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Macros and the await helper function from qfunctions_winrt(_p).h are
needed in other Qt modules which use UWP APIs on desktop windows.
Task-number: QTBUG-84434
Change-Id: Ice09c11436ad151c17bdccd2c7defadd08c13925
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Previously only qstr*icmp() were tested and the test data was sent via
QString and {en,de}coding. Use a local data-type to package pointers
to actual string literals for passing to these functions that take
them. Fold the various tests involving null pointers and empty
strings into the general testing, removing from "singularity" tests,
and combine the remainders of those tests into a single test of
singular cases for QByteArray::ompare. Move all these tests to
alongside the existing tests for QByteArray::compare. Use nullptr
rather than 0 as the null string.
Change-Id: Ie6d01e839c330c2f960af4bcc95e5633539337d6
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Including other headers, while defining very questionable macro
names, can and will result in trouble. Stop doing that.
While at it, move from including <QtTest> to include-what-you-use,
and clean up the code a bit.
Change-Id: Idb02ef2b612c0805baecac3ce6edd435609aca4c
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Previously it handled Latin-1, which made it incompatible with UTF-8,
which is now our preferred 8-bit encoding. For Qt6 it is limited to
ASCII. Adjusted tests to match. QLatin1String::compare() turned out
to be relying on qstrnicmp()'s Latin-1 handling.
Removed some spurious Q_UNLIKELY()s and tidied up code a little in the
process.
[ChangeLog][QtCore][Important Behavior Changes] Encoding-dependent
features of QByteArrray are now limited to ASCII, where previously
they worked for the whole of Latin-1. This affects case-insensitive
comparison, notably including qstricmp() and qstrnicmp(), and
case-transforming functions.
Fixes: QTBUG-84323
Change-Id: I2925d9908f8654599195a2860847b17083911b41
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
This class is designed as C++20-style generator / lazy sequence, and
the new return value of QString{,View}::tokenize().
It thus is more similar to a hand-coded loop around indexOf() than
QString::split(), which returns a container (the filling of which
allocates memory).
The template arguments of QStringTokenizer intricately depend on the
arguments with which it is constructed, so QStringTokenizer cannot be used
directly without C++17 CTAD. To work around this issue, add a factory
function, qTokenize().
LATER:
- ~Optimize QLatin1String needles (avoid repeated L1->UTF16 conversion)~
(out of scope for QStringTokenizer, should be solved in the respective
indexOf())
- Keep per-instantiation state:
* Boyer-Moore table
[ChangeLog][QtCore][QStringTokenizer] New class.
[ChangeLog][QtCore][qTokenize] New function.
Change-Id: I7a7a02e9175cdd3887778f29f2f91933329be759
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Since QString::split() is not going away in Qt 6, we should aim
to provide API symmetry here, and ease porting existing code from
QString(Ref) to use QStringView.
This is easier than having to port everything to use tokenize() at
the same time. tokenize() will however lead to better performance
and thus should be preferred.
Change-Id: I1eb43300a90167c6e9389ab56f416f2bf7edf506
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The idea is pretty simple -- add QRegularExpression matching over
QStringView. When matching over a QString, keep the string
alive (by taking a copy), and set the view onto that string.
Otherwise, just use the view provided by the user (who is then
responsible for ensuring the data stays valid while matching).
Do just minor refactorings to support this use case in a cleaner
fashion.
In QRegularExpressionMatch drop the QStringRef-returning methods, as
they cannot work any more -- in the general case there won't be a
QString to build a QStringRef from.
[ChangeLog][QtCore][QRegularExpression] All the APIs dealing
with QStringRef have been ported to QStringView, following
QStringRef deprecation in Qt 6.0.
Change-Id: Ic367991d9583cc108c045e4387c9b7288c8f1ffd
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Make the API more symmetric with regards to both QString and QStringRef.
Change-Id: Ia67c53ba708f6c33874d1a127de8e2857ad9b5b8
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Make the API more symmetric with regards to both QString and QStringRef.
Having this available helps making QStringView more of a drop-in
replacement for QStringRef. QStringRef is planned to get removed in Qt 6.
Change-Id: Ife036c0b55970078f42e1335442ff9ee5f4a2f0d
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The name CET is locale-dependent; but QLocale doesn't know about
localization of time zone names. Such abbreviated zone names are, in
any case, potentially ambiguous - various zones around the world have
collisions - so they can't be relied on.
QTimeZone's various backends have differing handlings of how to
abbreviate zone names (MS's provides no abbreviated names at all); and
it appears macOS actually follows the relevant localizations.
So it is hopeless to hard-code the expected zone abbreviations.
Changed the tests to consult QTimeZone for the abbreviation and
compare what it gets with the results of checks which should match
this. This is less stringent, but it is at least robustly correct,
thereby getting rid of assorted kludges and #if-ery.
Pick-to: 5.15
Task-number: QTBUG-70149
Change-Id: I0c565de3fd8b5987c8f5a3f785ebd8f6e941e055
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
resize() to a smaller size does not reallocate in Qt 5 if the container
is not shared. Match this here.
As a drive-by also fix resize calls on raw data strings to ensure
they are null terminated after the resize.
Change-Id: Ic4d8830e86ed3f247020d7ece3217cebd344ae96
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
