When the method is wrapped into
if QT_DEPRECATED_SINCE(MAJ, MIN)
we also need to add QT_DEPRECATED_VERSION_[X_]_MAJ_MIN macro right in
front of the method declaraion, to actually trigger a deprecation
warning.
This patch does that for QCursor's deprecated methods, and fixes all
related compilation warnings in QtBase.
Task-number: QTBUG-104857
Pick-to: 6.4 6.3 6.2
Change-Id: Ic8d059e8c852d4b2dee55e7ea94f4fc7a402cdf4
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
If the metatype does not support copy and default construction, then it
it unsuitunsuitable for use in QMetaType. We cannot prevent users from
passing in such metatypes (as we have e.g. a ctor taking QMetaType), so
verify this in customConstruct, and make the variant invalid in that
case.
Pick-to: 6.2 6.3 6.4
Change-Id: Ib1f0149c8fb9a1cce0049fd0311980754cc85d1b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The tst_QByteArray test redefines the QCOMPARE macro to check the LHS
to be NUL-terminated. Because the code was never ported from int to
qsizetype, it fails for QByteArrays of size > 2GiB.
Fix by porting to qsizetype.
Pick-to: 6.4 6.3 6.2
Task-number: QTBUG-104985
Change-Id: Ib3951b0efed5f734ae1324ea2d455bb7762fb9c4
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Or the previous limit, 10.
The test has a flaky and failing history, esp on macOS. Trying to
provoke race conditions with more threads than we have cores has little
value.
Pick-to: 6.4
Change-Id: I99dd2b5a6f64faa83963c279c84fc547416f914f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Deal with the case that the object gets deleted between a call to
moveToThread and the start of the thread by removing the object from the
list in that case.
Fixes: QTBUG-104014
Pick-to: 6.4
Change-Id: Ib249b6e8e8dfbc4d1332bb99a57fa9d3cff16465
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The test has timed out when run on ARM in qemu. We start more threads
than the ideal count, which is likely too much for the emulator when not
running the native architecture.
Pick-to: 6.4
Change-Id: I42e11945070646551e77c10618df762a4bffc8ba
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For built-in types, this is a compile-time assert - we should not have
any types in Qt for which we have neither debug streaming nor a
QTest::toString specialization implemented. A build of most of Qt
submodules passes with this change, after minor modifications to some
tests. We cannot declare QSizeHint::Policy as a metatype after the
QMetaType has already been instantiated for it, and the QDebug stream
operator for QElaspedTimer needs to be correctly declared within the
namespace.
Add a self-test function for a custom type, and update reference files
of the self-test.
Task-number: QTBUG-104867
Pick-to: 6.4
Change-Id: I2936db5933f4589fce45f47cf2f3224ed614d8c9
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
If we create a QThread from QThread::current(), we want it to have a
correct value for its bindingStatus. Thus, initialize bindingStatus in
the ctor of QAdoptedThread.
Task-number: QTBUG-101177
Task-number: QTBUG-102403
Pick-to: 6.4 6.3
Change-Id: I3ef27ed62c5dc25eed05d551c72743a1b8528318
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Allow specifying the Java class on which to set/get the field via its
corresponding C++ type, removing the need to explicitly provide the
Java type string.
Those were missing from a085a14d76, which
was noticed when porting QtConnectivity over to the new template APIs.
Pick-to: 6.4
Change-Id: I8f324c9fcc486b4c6c2f2b9051f7eca0cbec0e91
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
QMetaTypeInterfaceWrapper tries to find the metaObjectFunction using
the MetaObjectForType template. Using SFINAE, for a QObject, it should
resolve to a suitable specialization.
Such a specialization doesn't yet exist. It had to be created.
The following path returns nullptr for registered meta types:
auto metatype = QMetaType(typeId);
requestedTestType.metaObject() -> returns nullptr since a bad template
argument is fed to MetaObjectForType<T> in
QMetaTypeInterfaceWrapper<IneritingFromQObject>::metaType's static initializer.
Change-Id: I8b31c51e12cb19c333e00480b0177354b910ce1e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Port the constructor and addData() method to QAnyStringView, but keep
the overloads taking a QByteArray to avoid extra copies when actual
QByteArray is passed. These overlaods need to be Q_WEAK_OVERLOADs, to
avoid ambiguities (e.g. for const char * arguments).
Additionally, add a test to make sure the patch doesn't break parsing
from a QLatin1StringView input.
[ChangeLog][QtCore][QXmlStremReader] Added constructor and addData()
overloads taking QAnyStringView.
Change-Id: I0efaab82a2123271c88407e380f3c67d1099a4a6
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Since wasm doesn't like filesystems that well, we omit this test in
tst_qchar for wasm, this allows us to still run the test without the
case where it needs to read the normalization file.
Change-Id: I37e54d97e119f94e1a9ca53917d0b93183321899
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
QString has several functions taking a QRegularExpression: indexOf(),
contains(), and so on. Some of those have an out-argument of type
QRegularExpressionMatch, to report the details of the match (if any).
For instance:
QRegularExpression re(...);
QRegularExpressionMatch match;
if (string.contains(re, &match))
use(match);
The code used to route the implementation of these functions through
QStringView (which has the very same functions). This however opens
up a lifetime problem with temporary strings:
if (getString().contains(re, &match))
use(match); // match is dangling
Here `match` is dangling because it is referencing data into the
destroyed temporary -- nothing is keeping the string alive. This is
against the rules we've decided for Qt, and it's also asymmetric with
the corresponding code that uses QRegularExpression directly instead:
match = re.match(getString());
if (match.hasMatch())
use(match); // not dangling
... although we've documented not to do this. (In light of the decision
we've made w.r.t. temporaries, the documentation is wrong anyways.)
Here QRE takes a copy of the string and stores it in the match object,
thus keeping it alive.
Hence, extend the implementation of the QString functions to keep a
(shallow) copy of the string. To keep the code shared as much as
possible with QStringView, in theory one could have a function taking a
std::variant<QString, QStringView> and that uses the currently active
member. However I've found that std::variant here creates some abysmal
codegen, so instead I went for a simpler approach -- pass a QStringView
and an optional pointer to a QString. Use the latter if it's loaded.
QStringView has some inline code that calls into exported functions, so
I can't change the signature of them without breaking BC; I'm instead
adding new unexported functions and a Qt 7 note to unify them.
Change-Id: I7c65885a84069d0fbb902dcc96ddff543ca84562
Fixes: QTBUG-103940
Pick-to: 6.2 6.3 6.4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It's needed in QtHttpServer.
[ChangeLog][QtCore][QDebug] Can now stream QMetaType.
[ChangeLog][QtCore][QMetaType] Can now be streamed through QDebug.
Change-Id: I974d77d678137715472a3907ab1e50ba2dbaa087
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This commit adds macros for declaring scoped native callbacks which are
in namespace or for example defined as static class member variables.
The existing macros don't allow this as they use QtJniMethods namespace
and the introduced callbacks' namespaces are not enclosed in that
namespace, yielding a compilation error.
Pick-to: 6.4
Change-Id: I754560bea7e9a1b57c2661d1ee7236e78db39ba1
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
It's always true these days, assert so in qatomic.cpp and
tst_QAtomicInteger.
Update the docs.
Pick-to: 6.4
Change-Id: I3684cff96c1d2e05677314e29514cc279bd6b1a1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The manually defined native JNI function tables allow defining a name
that may be different from the actual function name; this name is then
used from the Java-side.
This can be useful to provide also as an option with the new
"unstringifying" macros which can help for example in porting code
to these new macros.
Pick-to: 6.4
Change-Id: Icfebfb351cb8dfb122795d20b37e2eac167a41bf
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
- Since 4edcea762d the dropsite example
shows markdown if available; and now it shows that when we do DnD
of a selection from the richtext example, text/markdown is available.
- If we artificially make html unavailable, copying and pasting between
widget-based rich text editors uses markdown.
In case markdown writer output contains unnecessary backticks due to
monospace fonts getting used, the workaround from
1ad456c908 is applied.
Pick-to: 6.4
Task-number: QTBUG-76105
Task-number: QTBUG-103484
Change-Id: Ie6ca4dbb450dbc36b3d09fd0df1ae5909aaebca7
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
This is a repeat of commit de6ced6692
"QCborValue: fix incorrect to{Array,Map} when the value is empty" (6.4),
which fixed the same thing for QCborValue. I've just copied the exact
same implementation onto the QJsonValue functions.
Pick-to: 6.2 6.3 6.4 5.15
Fixes: QTBUG-104085
Change-Id: I175efddd75f24ae59057fffd16f6b257bf7ed36d
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
If the QFuture is canceled because the associated QPromise has been
destroyed, we still need to run its continuations (i.e. onCanceled
handler, if it's attached), so replaced the cleanContinuation() call
inside ~QPromise() with runContinuation(), which will also take care of
cleaning the continuation.
[ChangeLog][QtCore][Important Behavior Changes] QFuture now runs its
continuations when its associated QPromise has been destroyed.
Previously, if a QFuture was canceled because the associated QPromise
has been destroyed, its continuations were skipped.
Fixes: QTBUG-103992
Pick-to: 6.4 6.3 6.2
Change-Id: Ie05bc760c96c349aade8adb8d2fe5263aff8efac
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Now that QStringConverter can handle non UTF encodings through ICU,
add a way to get a decoder for arbitrary HTML code.
Opposed to QStringConverter::encodingForHtml(), this method will
try to create a valid string decoder also for non unicode codecs.
Pick-to: 6.4
Change-Id: I343584da1b114396c744f482d9b433c9cedcc511
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When assigning the lambdas directly to a function_ref their lifetime is
limited to that of the expression. Store them on the stack first to
avoid the UB.
Fixes: QTBUG-104419
Pick-to: 6.4
Change-Id: I3c85ac683b0bd7768b646dc9d0a1ed4dd173e6f3
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Set it to nullptr on clear, and deal with possibly null bindingStatus.
Task-number: QTBUG-101177
Task-number: QTBUG-102403
Pick-to: 6.4
Change-Id: I66cb4d505a4f7b377dc90b45ac13834fca19d399
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
We missed the terminating ";" in the QSKIP lines.
Amends ea4d6b987a
Pick-to: 6.3 6.4
Change-Id: Ibda43b8a84230c243dbcc74e157f4c3f8ef3891d
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Thread termination might prevent stack unwinding, which then
generates ASAN errors such as
ERROR: AddressSanitizer: stack-buffer-underflow on address
0x7f3c1d7858b0 at pc 0x7f3c243d8918 bp 0x7f3c1d7857f0 sp 0x7f3c1d7857e8
Skip such tests so that we can enable blocking CI runs under ASAN.
Fixes: QTBUG-104421
Pick-to: 6.4 6.3
Change-Id: I169235a12190e3f72525cddfe1a44a4bee19eca1
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
This adds support for additional codecs to QStringConverter when ICU is
available.
We store the converter in the state (d[0]), and its canonical name in
d[1]. We need the name there, as in the clear function we close the
UConverter, and set the pointer to null. Consequently, the actual
conversion functions might need to re-open the converter again. The
advantage of this approach is that clear is used in the destructor of
State, and with this approach we properly clean up the state.
There is however a disadvantage: The clear function was so far also used
for resetting the state when QStringConverter::resetState . Discarding
the whole Uconverter for that is however rather costly. For that reason
we modify resetState to call a new function, State::reset. For existing
converters, it behaves the same as clear; for the ICU based converter,
we call the more efficient ucnv_reset. Code compiled against Qt 6.4 can
benefit from this more efficient version; code compiled against older Qt
versions will continue to work, as the conversion functions can just
recretate the converter from the name.
We can distinguish between ICU and non-ICU converters by checking if the
UsesIcu flag is set.
QStringConverter::name is changed to return the name stored in d[1]. The
interface of the ICU converter has a dummy name, so code using the old
name function from QT < 6.4 still returns something, namely a message
asking the user to recompile.
The function is moved out of line, as we need to check for the private
ICU feature, and want to avoid having that check in the public header.
As the QStringConverter ctor taking a name now can allocate memory, it
can no longer be noexcept. Removing the noexceptness is safe, as it was
only added after Qt 6.3.
Note that we cannot extend the API consuming or returning Encoding, as
we use Encoding values to index into an array of converter interfaces in
inline API.
Further API to support getting an ICU converter for HTML will be added
in a future commit.
Currently, the code depending on ICU is enabled at compile time if ICU
is found. However, in the future it could be moved into a plugin to
avoid a hard dependency on ICU in Core.
[ChangeLog][Corelib][Text] QStringConverter and API using it now
supports more text codecs if Qt is compiled with ICU support.
Fixes: QTBUG-103375
Change-Id: I7afb92fc68ef994179ebc7a3aa73beebb1386204
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The only way to use them was to put them in a union and then write all
the members of the union to set the various bit ranges. As only one
member of a union can be active at any time, the compiler is free to
optimize those writes away, though. This has started happening in the
wild now.
As we have a replacement, we can remove the old and broken code now.
Task-number: QTBUG-99545
Change-Id: I90718ec06662258d1c15220f54da9eed2186c5a5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Found by codespell
Pick-to: 6.4
Change-Id: Ie3e301a23830c773a2e9aff487c702a223d246eb
Reviewed-by: Nicholas Bennett <nicholas.bennett@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This reverts commit b9cce12e76, which
broke
function_ref<void(int)> f = [](int i) { return i; };
ie. swallowing of return types.
We could maybe implement the same without invoke_r, with the same
manual if-constexpr that invoke_r has, but it would be a pointless
duplication across the two thunks we have, so just use invoke_r.
Add tests.
Pick-to: 6.4
Task-number: QTBUG-103739
Change-Id: I6034f05d813c06a25e8058ded5b6b62f3ca858b4
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
We implicitly checked it, because, in C++20 builds, the non-equality
relational operators are synthesized from it by the compiler, and we
test those, but we didn't check that <=> returns strong_ordering.
We now do.
Pick-to: 6.4 6.3 6.2
Task-number: QTBUG-104108
Change-Id: Ieb19a2d4cb2d600d884f4e2e89e98c6187e23872
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
On finishing/terminating a thread, when processing posted events,
we need to consider QThread's own data instead of caller thread's data.
Otherwise we can get into unexpected situations such as double
destruction of an object, premature destruction, etc.
Fixes: QTBUG-103922
Pick-to: 6.4 6.3 6.3.1 6.2 5.15
Change-Id: Idf77221ebbaa0b150ee2d0c296b51829ae8dc30e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Skipping moveToTrash() test is needed because WebOS
does not implement a trash bin directory.
Fixes: QTBUG-104053
Pick-to: 6.4
Change-Id: Id1d1595eb401d8ef3a403c915d95be1cd75368d2
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
[ChangeLog][QTestLib] QCOMPARE now evaluates toString() on its
arguments lazily, speeding up the general case where the comparison
doesn't fail. This is true for the QCOMPARE functionality provided
by Qt. If you specialized qCompare() for your own types, then you
need to change its implementation in line with Qt's own qCompare()
specializations in order to enable this feature.
[ChangeLog][QTestLib] QCOMPARE calls with nullptr argument(s) will
now print the actual and expected values upon failure.
Previously it was not like that because of the compareHelper()
overload in qtestresult.cpp that treated the presence of
nullptr-arguments as a reason to ignore formatFailMessage() call.
New implementation does not have this check, and correctly
executes formatFailMessage() for all arguments.
Note that the qCompare() overloads that call QTestResult::compare()
internally were not affected by this patch, because they already
defer toString() invocation until the comparison fails.
Some numbers, collected against shared release developer build.
I checked how this change affects the test execution. The idea was
to pick some tests for types that do not have a specific
QTestResult::compare overload, so I picked a couple of QByteArray
tests.
The comparison is done by running a test 10 times and taking the
average execution duration, as reported in the log.
tst_qbytearrayapisymmetry:
Before: 15.6 ms
After: 14.2 ms
tst_qbytearray:
Before: 41 ms
After: 36 ms
The benefit is around 9% and 12% respectively.
Fixes: QTBUG-98874
Change-Id: I7d59ddc760168b15974e7720930f629fb34efa13
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
This allows to defer the toString() invocation until it is really
needed, and so allows to speed-up the test execution.
I was testing a release shared developer build, running
tst_QStringApiSymmetry 10 times before the change, and 10 times after
the change, and then taking the average execution duration, as
reported in the log.
Before the change (using QCOMPARE): 51ms
After the change (using QCOMPARE_EQ): 45ms
As we see from the results, the benefit is around 10%.
Task-number: QTBUG-98873
Task-number: QTBUG-98874
Change-Id: Ifcfbcca1f2c1eaf82c7f1a9098fa1512a269cbf8
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
The compare() implementation made its actual and expected seem to have
different types (using a typedef name for one, when the other was of
the type that expands to) and the formatter it used was needlessly
clunky. Use modern string literals and package a repeated
null-or-quoted representation as a lambda, inline the resulting
simplified prettyElement() into prettyPair(), which can now just take
a pair rather than an iterator. Short-cut the empty list so that the
comma-joined accumulation could initialize with the first entry and
loop over the rest, always joining with a comma.
Undo commit f776595cc10aaafc7162f382a8fa11afffb0e708's mistaken update
to the copyright header and update correctly.
Change-Id: I99258dafa01e79f9ec384d9b375a59376eb7fb53
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This requires a different computation of the mask since we can't shift
out of the storage type.
Change-Id: Ife85ca3e0c5ca47f06988a397cc2f8a7e28ad0fe
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is an implementation of function_ref, which has been proposed for
inclusion into C++23, but has not been accepted, yet, which is why we
place it in namespace qxp (for eXPerimental) instead of q23.
The implementation is based on wg21.link/P0792r9, which, at the time
of writing, is the latest revision of the paper. It will be used in
both QTestLib and qmldom.
Fixes: QTBUG-103739
Change-Id: I52723eca28f7ac02ce7ce51928361d81ae5c92b1
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
QScopedValueRollback has a few users that apply it on QAtomicInt,
which happens to work as QAtomicInt is copy-constructible and its
ctors are implicit.
But that's of course nonsense. We don't need to store the oldValue in
an atomic, nor do we need to pass the new value into the ctor as an
atomic.
So, add a QAtomicScopedValueRollback which works on std::atomic as
well as the Qt atomics, but distinguishes between the reference (which
is atomic) and the value (which isn't), and use it in one of the
users, tst_QList.
Keep it private until we know whether there's an actual need for this.
The test is a copy of tst_qscopedvaluefallback, so the occasional
oddity (like atomic op*=) should be ignored.
Task-number: QTBUG-103835
Change-Id: I3c05b3e51f465698657a02ca5521ed465386e9a6
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
As with method signatures, register class names using template function
specialization in the QtJniTypes namespace, and then declare C++ types
as JNI classes with a class name string. Such classes implicitly get
registered as JNI types as well.
Add a QJniObject construct method (since C++ constructors that are
templates cannot be explicitly instantiated with a type), and a
QJniEnvironment::findClass overload.
Add test coverage, also for the recently added macros for native
methods.
As a drive-by, change the name of the Q_JNI_DECLARE_NATIVE_METHOD
macro to Q_DECLARE_JNI_NATIVE_METHOD for consistency.
Change-Id: Ic19562d78da726f202b3bdf4e9354e8ad24d8bd9
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Attempting to use an invalid QStringConverter would so far have resulted
in a crash, as we would dereference the null iface pointer.
Fix this by inserting adequate checks, and ensure that hasError returns
true if we attempt to en/decode with an invalid converter.
Pick-to: 6.2 6.3
Change-Id: Icf74bb88cd8c95685481cc0bd512da99b62f33e6
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
There are no commented out test cases remaining, so the normal
test vectors are identical to full test vectors.
Fixes: QTBUG-97537
Pick-to: 6.3
Change-Id: I987f178f192e1c8e2d998d36499fdce84f237e77
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
UAX #14, revision 45 (Unicode 13) has changed rule LB30 to only
trigger if the open parentheses is non-wide:
(AL | HL | NU) × [OP-[\p{ea=F}\p{ea=W}\p{ea=H}]]
This fixes the remaining 24 line break tests.
Task-number: QTBUG-97537
Pick-to: 6.3
Change-Id: I9870588c04bf0f6ae0a98289739bef8490f67f69
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Implement part of LB30b introduced by UAX #14, revision 47
(Unicode 14.0.0):
[\p{Extended_Pictographic}&\p{Cn}] × EM
This fixes one line breaking test.
Task-number: QTBUG-97537
Pick-to: 6.3
Change-Id: I3fd2372a057b7391d8846e9c146f69a54686ea61
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Word breaking rule WB3d should not be affected by WB4.
This fixes the remaining word break test.
Task-number: QTBUG-97537
Pick-to: 6.2 6.3
Change-Id: I99aee831d7c54fafcd2a9d526a3e078b12c5bfad
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
