It is in nearly all cases much faster (in our benchmark it is
about a factor 8) - and it also makes the code more readable.
Change-Id: I075e1d1a96756e5e9a2bf53b5479094f7d87883d
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
updateBlock is part of the interface of QAbstractTextDocumentLayout
however QTextDocumentLayout implementation is not invoking it.
This commit adds similar behavior to QTextDocumentLayout as the
QPlainTextDocumentLayout (QtWidgets) has by implementing the missing
functionality.
[ChangeLog][QtGui][QTextDocumentLayout]
Emit updateBlock signal in QTextDocumentLayout.
Task-number: QTBUG-36743
Change-Id: I7f812d4d5d7c2148393ee672fb0db6c0b2e73783
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
This fixes compilation of Qt for Android when configured with
"-no-widgets". One good use-case for that configure switch is
that QtSvg loses the dependency to QtWidgets.
Change-Id: I8a645d9fee6ce0467ff0b5d1d62531b7c6272aab
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Reviewed-by: Daniel Teske <daniel.teske@digia.com>
This partially reverts 5764f5e6ea and
fixes the problem differently.
After this commit, "file:///foo" is still equal to "file:/foo", but
"foo:///foo" becomes different from "foo:/foo", as it should be.
Task-number: QTBUG-36151
Change-Id: Ia38638b0f30a7dcf110aa89aa427254c007fc107
Reviewed-by: David Faure <david.faure@kdab.com>
The drawing code currently only optimizes the bilinear interpolation
under specific conditions that allows the optimizations used there.
The patch adds a SSE2 version of the fallback 4 pixel interpolation.
Change-Id: I4e8a2ba6cb44647105a9b24e38b3ab755a435050
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
In case the QPlatformTheme does not provide a QPlatformMenu the
QPlatformSystemTrayIcon is not able to forward the menu because the
QPlatformMenu pointer passed to updateMenu is always null. Providing a
QPlatformMenu in the QPlatformTheme implementation should not be a
requirement for having the menu in the system tray icon. There are
cases where no QPlatformMenu should be created by the theme, e.g. if
the X11 implementation of QSystemTrayIcon gets provided by the xcb
plugin.
The change adds a virtual method to QPlatformSystemTrayIcon to create
a QPlatformMenu. This method is called from the QPA implementation of
QSystemTrayIcon if the QMenu's platformMenu is not present. Thus the
system tray icon is able to provide a custom implementation of the
menu. This gets installed through a new internal method in QMenu to set
the platform menu. It creates the required connections and sync the
state to the QMenu to the newly created QPlatformMenu.
Last but not least QPlatformMenu is extended by a method to create a
QPlatformMenuItem. The default implementation delegates to the platform
theme. This allows to provide the menu item implementation for the
system tray icon without providing the QPlatformMenuItem through the
platform theme.
Change-Id: I17234bd8bcf8c05f8bd786feff0cf8f860430e82
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
The setting of the default format of Raster_A8 was mistakenly
moved down to below the override of Raster_RGBMask.
Change-Id: I52ee19180471c6f5c8d6824ee35f8d39632c9d94
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
This fixes regression introduced in f864bdaf59
(in resolveAdditionalFormats(), formatIndex(si) returned an invalid
block format index due to non-empty specialData->resolvedFormats)
Task-number: QTBUG-36759
Change-Id: I4da13d2edaf1987bcd85b2ef326e9d22345eb8f3
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Turns out that \obsolete means "Qt3Support", while the correct tag
is \deprecated.
Change-Id: Id9896893f3078a0d516bd8751bce0b2df441509d
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
0x80000000 is too big for a signed 32-bit int, so the compiler ends
up choosing a 64-bit number. Then it will not be the same size as
the parallel enum QDialogButtonBox::ButtonRole, which does not have
these extra flags. By making EOL be the same as InvalidRole and
changing Reverse to 0x40000000, we don't need to use 0x80000000 at
all, so again the compiler can choose a 32-bit representation
for both if appropriate. EOL is used as a terminator in the
static const int buttonRoleLayouts table and therefore as a terminator
in arrays returned from QPlatformDialogHelper::buttonLayout().
It's internal API so it's OK to change in a minor release, but
QtQuick.Dialogs is also looking for the EOL now, so we should avoid
changing it again if possible. This is mainly for efficiency and
for avoiding surprise data type conversions when casting from one
enum to the other.
Change-Id: Ia7b7ce43c8f929d09dd999769e9b7114f695e9a4
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
When the focus changes, screen sends a focus deactivated change for the focus window.
Depending on the order, this might deactivate the window focus completely. This
for example leads to problems with QComboBox.
Change-Id: Ia57f061a765c1f971d86d941b17f573ce9221ae1
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
Reviewed-by: Bernd Weimer <bweimer@blackberry.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
The navigator swipe down event is not mapped to a platform panel event any more.
Instead the NavigatorEventHandler is exposed through the QPlatformNativeInterface.
Change-Id: I6d29bba011849da5210f6f4d595e3c2e0c021449
Reviewed-by: Bernd Weimer <bweimer@blackberry.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Modern websites use around 15 hosts on average so the limit of 5 DNS
looks meant that most non-trivial sites have to wait for at least one
unneeded round trip.
Task-number: QTBUG-30866
Change-Id: I584dd46c247e0413b2ed88dd66f111cff08ff987
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The index is only helpful if the version of GDB to
create it uses the same version as the GDB version
that consumes it. Outside the "local development"
scenario this happens only by conincidence, still
we add ~3.6% to the debug library size and face
maintenance issues like QTBUG-34950.
We also don't see the same performance benefit anymore
with recent versions as we did when the feature was
added, so it's best to not create the index anymore.
People who need it, still can add it manually, or
by the 'gdb-add-index' tool that comes with recent
versions of GDB, or trust their distributors to
set up indexes matching their runtime environment.
Task-number: QTBUG-34950
Change-Id: Id4c79fa51fea9622b0891bd9b9b395b948ecb157
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Implemented the use of the new QDnsLookup property "nameserver".
On the Linux platform, we can specify both IPv4 and IPv6 addresses
for the nameserver.
On Windows since we are using DnsQuery_W(), which does not have a
way of accepting IPv6 addresses, passing IPv6 nameserver address
is not supported.
On OSX/BSD platforms, specifying IPv6 addresses for nameserver
require access to the __res_state_ext structure which is in a
private header of libresolv (this header is different for BSDs and
OSX). If this feature has to be enabled in the future, we have to
figure out a way to access this struct by either accessing the
private header or by specifying one of our own. Currently, I'm
disabling it till such a solution is arrived at.
Nameserver support on different platforms:
Platform | IPv4 | IPv6
-------------+---------------+---------------
Linux/X11 | supported | supported
-------------+---------------+---------------
Windows | supported | not supported
-------------+---------------+---------------
OSX | supported | not supported
-------------+---------------+---------------
WinRT | not supported | not supported
-------------+---------------+---------------
Others | supported | not supported
| (not tested) |
-------------+---------------+---------------
Task-number: QTBUG-30166
Change-Id: Iedbddf15b9a62738ce4c2cfa0fce051514d64766
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This fixes the issue that the blitter required sometimes the
texture wrapping to be repeat
Change-Id: I86150d008422facf9040873b0983b0e44be9ad24
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
The Origin for Target rect was deemed a confusing concept. The current
implementation would translate the target rect to the coordinate system
specified. However, the order and "direction" of the vertices would
always be the same. So drawing a texture in for one target rect defined in
one coordinate system would paint the texture the same way as it would
when a texture was drawn for a target rect drawn in the "opposite"
coordinate system. The point with this was that if you wanted to "flip"
the texture you would specify that with the source coordinate system.
However, this approach breaks on different levels, such as QRect has functions
which expects a top left coordinate system (ie. top() and bottom()).
In the end Qt uses a top left coordinate system, hence QWindow specifies
a top left coordinate system, and hence the api becomes easier if it is
not possible to define the coordinate system of the target viewport.
Change-Id: I7dd59b3718380876e87a4bff88381d7a1c7d58c1
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
This also has the advantage of not requiring the use of the locale
codec. Quite an advantage if you're debugging the locale codec. But it's
mostly so that we don't get question marks that hide the difference we
were trying to locate.
[ChangeLog][QtTest] QtTest now prints an escaped version of QStrings
that failed to compare with QCOMPARE. That is, instead of converting
non-printable characters to question marks, QtTest will print the
Unicode representation of the character in question.
Change-Id: I44c1ef3246b188c913dacd3ca4df02581356ea41
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
[ChangeLog][QtCore][Atomic support]Added more operations to the atomic
classes, including operator T(), operator=(T), operator++,
operator--. For the QAtomicInteger, bit-manipulation operations are
also provided, both in operator and in fetchAndXxxYyyyyy modes.
Change-Id: I39c07be74e15e0a48f9e931f4342b182004dee1a
Reviewed-by: David Faure <david.faure@kdab.com>
This is extremely useful, since the most common action after a failed
compare-and-swap is to loop around, trying again with the current
value as found in memory.
Code currently written as:
do {
Type value = atomic.load();
...
} while (!atomic.testAndSetRelaxed(value, desired));
Becomes:
Type value = atomic.load();
do {
...
} while (!atomic.testAndSetRelaxed(value, desired, value));
In most CPU architectures, the value that was found in memory is known
to the compare-and-swap code, so this is more efficient than the
previous code. In architectures where the value is not known, the new
code is no worse than before.
The implementation sometimes modified an existing function, sometimes
it added a new one, depending on whether more registers were needed in
the assembly (like ARMv6-7), the code became more complex (ARMv5), the
optimizer failed (C++11), or it was just plain equivalent (MIPS).
Change-Id: I7d6d200ea9746ec8978a0c1e1969dbc3580b9285
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
ICC 8 and 9 are positively ancient. I doubt anyone is using them for
Qt, let alone Qt 5. ICC 11 through 13 haven't supported OS X.
ICC now masquerades as Clang, so we need to let qmake and
qcompilerdetection.h know about it.
Change-Id: If0d2bd8b6a4a45250c15c9472c062effc76f17de
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Apparently it doesn't like the text.
Change-Id: If8e14df84f0d9915018eac94df16bf1b679155e0
Reviewed-by: Keith Gardner <kreios4004@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The QByteArray version was missing the overflow check that the other
versions had.
Change-Id: I03cd92e5e5a84c038bee1f1ee217e93e9d9a675a
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
This implementation is based on GCC's implementation of std::hash<FP>, but only
to the extent of checking for zero before hashing the bits. The bit hasher is
the Qt one; I didn't even look what GCC uses.
The check against 0.0 is mandated by the requirement to have
\forall x,y: x == y => qHash(x) == qHash(y)
which would be violated for x = 0.0 and y = -0.0 if we only hashed the bits.
Implemented out-of-line to avoid potential FP-comparison warnings, as well
as to be able to use the file-static hash() functions, which gets inlined
unlike qHashBits(), which cannot be.
[ChangeLog][QtCore][QHash/QSet] Allowed to use float, double and long double
as QHash/QSet keys.
Change-Id: I38cec4afb860f17e9f8be7b67544e58b330f8fff
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
The properties that make up the hash value are chosen to be the same as those
that make up QFontDef's op<() and op==(). Indeed, the implementation for QFont
simply delegates to the one of QFontDef, which has been added for this purpose,
but may prove useful in its own right down the line.
The code would greatly benefit from a qHash(qreal) implementation. Lacking
this, the patch uses multiplication with 10000 and qRound64() to convert
the one floating-point property used in the hash to an integer. This is
probably the right thing to do anyway, to avoid epsilon problems.
[ChangeLog][QtGui][QFont] Added qHash overload for this class.
[ChangeLog][QtCore][QHash] Allowed QFont to be used as a key in QHash/QSet.
Change-Id: I2c1cb5d9da53e26cb2c0f1a7c357731e73eea78e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This test can assume that the QObject::signalsBlocked property works as
advertized, so just check signalsBlocked() in repsonse to QSignalBlocker
manipulations.
Change-Id: I99e4ef9c4ed05c3840233d92a587636d2d78f59a
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
When you launch an activity through an intent,
data can be provided back from the activity when it has finished
using onActivityResult() in the activity which launched it.
This is okay for applications, since they can easily create their
own activities, but does not work for libraries that need to
use intents. There is no listener API for activity results which
allow external classes to eavesdrop.
In order to support launching intents from third-party or add-on
libraries, we provide a low-level way to hook into the activity
result event. The corresponding public API will be added to
QtAndroidExtras.
Change-Id: I89417f485e2c0e69028dcccc7c155788346a7417
Reviewed-by: Christian Stromme <christian.stromme@digia.com>
Change 85e57653 caused a compile error for code that does
Q_DECLARE_LOGGING_CATEGORY(cat);
//..
qCDebug(cat()) << // ...
error: C3848: expression having type 'const QLoggingCategory' would lose
some const-volatile qualifiers in order to call 'QLoggingCategory
&QLoggingCategory::operator ()(void)'
This is a regression from Qt 5.2. Fix the error by adding a const version
of operator()().
Change-Id: I2fb04f2e155962adee0f98089fc5a159000bef56
Reviewed-by: Alex Blasche <alexander.blasche@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The use of if {} else {} in the macro causes compiler warnings
about "ambiguous 'else'" if qCDebug is used in an if / else without brackets.
Revert to the for loop, but make the variable name less likely
to clash.
This reverts commit bab5f5873680aa3c5a22d94da112aafd2b0b53d3.
Task-number: QTBUG-36605
Change-Id: Ie4b075b63b83b7f8a2ad61437b7bf3e6a6c0177a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
Reviewed-by: Alex Blasche <alexander.blasche@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Added basic functionality to socket for WinRT. Even though not
all auto tests pass yet, this patch can be seen as a foundation
for upcoming work in this area. Reading from and writing to TCP
socket works and one can listen for tcp connections.
Change-Id: Id4c25ba1c7187ed92b6368c785c4f62837faded7
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
Moving them into QPlatformDialogHelper for the convenience of both
widgets and QtQuick.Dialogs. The main reason is to ensure that
QtQuick.Dialogs does not need to depend on the widgets module, in
order to re-implement the button box concept in a generic dialog.
Change-Id: If400d215338d7cb6dade39d9de60e50b5e7515ef
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Currently, inputMethodQuery() only provides information about the
current paragraph. On some platforms, such as Android, the input method
needs information about the global cursor position, and more of the
surrounding text. Some queries need to pass parameters.
The current inputmethodQuery() implementation does not allow parameters to
be passed. Changing this would require new or modified virtual functions, which
is not possible until Qt 6. Therefore, a completely new mechanism is needed.
Change-Id: Ic64fd90198ade70aa0fa6fa5ad3867dfa7ed763c
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
category() returns a const QLoggingCategory so our code does not
compile anymore. Do it differently.
Fix also the Windows error string formatting a bit.
Change-Id: Ie0b6b02947d94b7ccf4a4a57da487dfa8a15709d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
I find the current description of primaryOrientation and orientation
a bit confusing.
Change-Id: I25d77cff2c27c481607903bc1aeb54eacf616718
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
The Qt documentation says that PortraitOrientation is rotated 90 degrees
clockwise relative to LandscapeOrientation. This means that the home
button should be on the right when held in LandscapeOrientation,
therefore, Qt::LandscapeOrientation == UIDeviceOrientationLandscapeLeft.
Without this patch, all QScreen mapping functions are broken.
Change-Id: I2c570cd0307b7fbd59c749d6574dcb258790cfbc
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
The code was not creating all of the storage necessary for cubemaps
as well as attempting to bind to the cubemap face targets which is
invalid when using mutable storage - typically on OS X where
EXT_direct_state_access is not available and immutable storage is only
available at all if using an OpenGL 4.1 context.
Change-Id: I4cf84f1b88c90e8359366392b3ccda65669ebfa7
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Pasi Keränen <pasi.keranen@digia.com>
