QWidget::setVisible is virtual, and called via hide() by both the
QDialog and the QWidget destructor. A dialog that becomes invisible
when getting destroyed will at most execute the QDialog override.
Subclassing QDialog and overriding setVisible() to update the state
of the native platform dialog will not work, unless we explicitly
call hide() in the respective subclass's destructor.
Since e0bb9e81ab, QDialogPrivate::setVisible is
also virtual, and gets called by QDialog::setVisible. So the clean
solution is to move the implementation of the native dialog status
update into an override of QDialogPrivate::setVisible.
Add test that verifies that the transient parent of the dialog
becomes inactive when the (native) dialog shows (and skip if that
fails), and then becomes active again when the (native) dialog is
closed through the destructor of the Q*Dialog class. The test of
QFileDialog has to be skipped on Android for the same reason as the
widgetlessNativeDialog.
Fixes: QTBUG-116277
Pick-to: 6.6 6.5
Change-Id: Ie3f93980d8653b8d933bf70aac3ef90de606f0ef
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Nothing in those files uses QPair; and a local build finished fine without them.
Task-number: QTBUG-115841
Change-Id: I669cfecaa9129bce6b31e464826287f138b159db
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QSharedPointer is 'meh', see QTBUG-109570 and 18113e22e9.
This is just a textual replacement of
- QSharedPointer<(.+)>::create() → std::make_shared<\1>()
- QSharedPointer → std::shared_ptr
And it compiles and still passes. No non-standard APIs to fix up.
Task-number: QTBUG-109570
Change-Id: I827d4a9be0511780c3900bd53ffcbdcb6aacbc3b
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Reviewed-by: Ahmad Samir <a.samirh78@gmail.com>
These are all trivial: all are over (already or newly-made) const
local variables.
As a drive-by, replace a QList legacy left-shift-based- with
initializer_list-construction.
Pick-to: 6.6 6.5
Task-number: QTBUG-115803
Change-Id: I453e24272c4c4b7dce5b91a0bd04481d833c50bb
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
This is iterating over data member containers that are otherwise only
touched in the constructor of the same object. Luckily, the
initialization of these containers does not require *this, so use
NSDMI and mark the containers const, proving they can never be
modified and thus the protective copy of Q_FOREACH isn't required. Now
that we got rid of Q_FOREACH, we can and do make them arrays for extra
measure ("never use dynamically-sized containers for statically-sized
data").
Unfortunately, C++ neither allows us to use "flexible array
members" nor AAA in NSDMI, so grab the nettle and supply the array
size manually (ever so slightly violating DRY, but the compiler will
complain if we get it wrong).
Task-number: QTBUG-115803
Pick-to: 6.6 6.5
Change-Id: Ibb2ce48b6dcaf2e9d3d1a625602f3865d280c7c6
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
This is iterating over a data member container that's otherwise only
touched in the constructor of the same object. The only reason why
it's not a const is that the initialization from QWizard::addPage()
makes that very cumbersome. So port to a ranged for-loop and apply
std::as_const().
Task-number: QTBUG-115803
Pick-to: 6.6 6.5
Change-Id: I033e3725df95b29a8ef295c4e74d746d83234835
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
This is iterating over the keys() of a member container we've just
filled in the same function. The loop body clearly doesn't modify the
container being iterated over. Port to the future-proof ranged
for-loop over asKeyValueRange(), using the _-in-SB pattern Christian
Ehrlicher showed me to indicate we're not interested in the value.
Task-number: QTBUG-115803
Pick-to: 6.6 6.5
Change-Id: I3d86a1de9ea460b7d57fa421ea76e41d2c122f43
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
This is safe to port to a ranged for loop, as it's iterating over a
private member container that is not modified under iteration
(WizardPage::shown() is just returning a boolean member).
Task-number: QTBUG-115803
Pick-to: 6.6 6.5
Change-Id: I50891e4b7509bd64399a128a5ee47d7795374f8e
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
This function is called only from one test function. Mark the
function's argument as const in the caller, bringing this use into the
const-local category, which is implicitly safe to port 1:1 to
ranged-for.
Task-number: QTBUG-115803
Pick-to: 6.6 6.5
Change-Id: I9145c1ae2aed5ab3cafc4947dc3eaaf9a27c6a04
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
These are all trivial: all are over (already or newly-made) const
local variables.
The only noteworthy point here is that, in order to mark it as const,
I had to move a container definition to the more narrow scope in which
it was actually initialized. There are no references to the container
outside the narrow scope that would require it to be defined in the
larger scope.
Pick-to: 6.6 6.5
Task-number: QTBUG-115803
Change-Id: I20890f48a48ca662679f55fa5db759419d4db8c5
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Add the boilerplate standalone test prelude to each test, so that they
can be opened with an IDE without the qt-cmake-standalone-test script,
but directly with qt-cmake or cmake.
Boilerplate was added using the following scripts:
https://git.qt.io/alcroito/cmake_refactor
Manual adjustments were made where the code was inserted in the wrong
location.
Task-number: QTBUG-93020
Change-Id: I3c0d1a63c474969e5eaee5fdbb1bb0229482fc5b
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
As a result of d8bbb5ee0e, we
were no longer calling QDialog::done(), which users may have
overridden.
We now pull out the dialog code to determine whether to
emit accepted/rejected directly in done(), so that we
can go back to calling QDialog::done().
Pick-to: 6.6 6.5
Change-Id: Ie08270123d61d9010acd8c989b66986f71960ad0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The native style may not match the program style and it
makes sense to give an option rather than forcing native style.
Before it could only be done with setting AA_DontUseNativeDialogs
on the app, but it is reasonable to use native file dialogs and
Qt styled messageboxes - and it is extremely cumbersome - especially
since messageboxes often can start save dialogs.
It can look a bit strange that these introduced options has just one
option (DontUseNativeDialog) and four functions, but this way it works
similar to QColorDialog, QFileDialog and QFontDialog.
[ChangeLog][QWidgets][QMessageBox] Added options functionality to
QMessagebox. The currently only option available is DontUseNativeDialog.
Change-Id: I70282fcfaa66f245f7e679b8897c607bcaff333f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
QColorDialog supports entering hex rgb values only with a leading #.
That makes copy/paste impossible whenever the copy source has plain
hex, without the leading #.
This patch automatically adds a leading # character, when missing.
As a drive-by, QObject::connect statements are altered to PTMF syntax,
amending 9eb1b9e86ce3d1004e39e8ab7c7ecb6796d6df1a.
The patch also adds an autotest for the new functionality.
Fixes: QTBUG-111742
Pick-to: 6.5
Change-Id: I4ced29dc8b543457f411a3fa0ac756b550cdb09f
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
All the other overloads are implemented using the new one.
Windows change relies on the pre-check in the code review making sure it
compiles.
[ChangeLog][QtCore][QThread] Added sleep(std::chrono::nanoseconds)
overload.
Task-number: QTBUG-110059
Change-Id: I9a4f4bf09041788ec9275093b6b8d0386521e286
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The choice of whether to show a message again is per message,
so when showing a new message we need to reset the check box
back to its default checked state, otherwise the user might
mistakenly dismiss more than the indented message.
[ChangeLog][Widgets] QErrorMessage will now reset the check
box for showing a message again for each new message shown,
as each individual message has its own suppression state.
Pick-to: 6.5 6.5.0
Change-Id: I86d4bb5eabdb5b7a478c03516108a5edf87fcbe3
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
As of macOS 10.14 the keyboard assistant background is shipped as part
of the compiled asset catalog of the app, so looking it up via a URL
will fail.
Instead we look it up via NSBundle's dedicated image lookup function,
which handles both cases.
The logic has also been moved to qwizard.cpp, since the additional
plumbing via QPlatformNativeInterface was unnecessary.
The keyboard assistant itself no longer shows the background image
as of macOS 12, so we might consider doing the same, but the design
of the assistant has also changed significantly, so as long as our
QWizard layout looks like the old keyboard assistant we keep the
background as well.
Pick-to: 6.5 6.2
Change-Id: I7d42dd79b285f3518837458864bca6bc353b3b6d
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Clients who called the base-class implementation in QDialog would
as a result start hitting the canBeNativeDialog code path at the
start of QDialog::setVisible(), which would show the native dialog,
but without updating the QWidget visibility state.
To keep things 100% compatible, we shuffle the implementation of
QDialog::setVisible() into QDialogPrivate, which allows us to
override it in QMessageBoxPrivate and QErrorMessagePrivate.
The existing subclasses of QDialog that override setVisible have
been left as is, to not cause any unintended behavior change.
Pick-to: 6.5
Change-Id: Icafe31a7b84a75049365e4e04b80492de08614d2
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
When the test is showing the error message over and over, it's not
waiting for the native dialog to actually become visible, and as
a result, hiding it has no effect and won't result in a call
to processResponse, where we got rid of the native dialog.
To fix this we explicitly release the native dialog when
encountering this corner case.
Add logic to QErrorMessage to test both native and non
native dialogs.
Pick-to: 6.5
Change-Id: I19ac3f463997aed1e66f646fdfcbb4d2459116d1
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The native implementation uses NSAlert, making a best effort to map the
QMessageBox properties to the native dialog, falling back to the cross
platform non-native dialog if the discrepancy is too big.
The initial implementation focuses on the current state of the
native dialog helper "protocol", but there's room for improvement
here, which would allow even more dialog types and properties to
be native.
[ChangeLog][macOS] Message boxes such as QMessageBox now follow
the platform look and feel by using native dialogs if possible.
Change-Id: I4da33f99894194a7b301628cd1fbb44d646ddf18
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Skip on crashing tst_qvulkan test
Blacklisted completer_data on qfiledialog
(8d76c5af51 should have been enough but
it is still failing)
Task-number: QTBUG-108328
Task-number: QTBUG-108329
Change-Id: Iad5573af60cca16d16ba0462293e276186e25653
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
The uses of the click_cocoa_button() function was removed in 2012,
in ba21ca7b5b.
Change-Id: If7abfc56bb307cfbf9f6628cec9c7267a8a1f31f
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The qfiledialog test was failing on completer_data test. The fix
available for Android 11 also works in Android 7, so removed the if
clause.
Task-number: QTBUG-105377
Change-Id: I76a4c1073a754c9b299cfe731f42b80da1a6f8e2
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
This is a semantic patch using ClangTidyTransformator as in
qtbase/df9d882d41b741fef7c5beeddb0abe9d904443d8, but extended to
handle typedefs and accesses through pointers, too:
const std::string o = "object";
auto hasTypeIgnoringPointer = [](auto type) { return anyOf(hasType(type), hasType(pointsTo(type))); };
auto derivedFromAnyOfClasses = [&](ArrayRef<StringRef> classes) {
auto exprOfDeclaredType = [&](auto decl) {
return expr(hasTypeIgnoringPointer(hasUnqualifiedDesugaredType(recordType(hasDeclaration(decl))))).bind(o);
};
return exprOfDeclaredType(cxxRecordDecl(isSameOrDerivedFrom(hasAnyName(classes))));
};
auto renameMethod = [&] (ArrayRef<StringRef> classes,
StringRef from, StringRef to) {
return makeRule(cxxMemberCallExpr(on(derivedFromAnyOfClasses(classes)),
callee(cxxMethodDecl(hasName(from), parameterCountIs(0)))),
changeTo(cat(access(o, cat(to)), "()")),
cat("use '", to, "' instead of '", from, "'"));
};
renameMethod(<classes>, "count", "size");
renameMethod(<classes>, "length", "size");
except that the on() matcher has been replaced by one that doesn't
ignoreParens().
a.k.a qt-port-to-std-compatible-api V5 with config Scope: 'Container'.
Added two NOLINTNEXTLINEs in tst_qbitarray and tst_qcontiguouscache,
to avoid porting calls that explicitly test count().
Change-Id: Icfb8808c2ff4a30187e9935a51cad26987451c22
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
And include qcore_mac_p.h where needed.
Task-number: QTBUG-99313
Change-Id: Idb1b005f1b5938e8cf329ae06ffaf0d249874db2
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The function is used the internal window activation machinery and
should not be called by user code.
Many tests still use this function, and should be ported over to
QWidget::activateWindow(). For now they are using the private
helper in QApplicationPrivate, so that we can progress with the
public API deprecation.
Change-Id: I29f1575acf9efdcbae4c005ee9b2eb1bb0c8e5b5
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
* Wrap some tests that specifically test deprecated APIs
into #ifdefery
* Refactor some tests to use available methods
Task-number: QTBUG-104858
Change-Id: I03e318004ce1c2718ee574bf11e00df9bc04bcaa
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
If restoring a QHeaderView state from a data stream with version Qt_5_0,
check alignment and resize mode properites for out-of-bound values.
If out of bounds, try QDataStream version Qt_6_0, which is used by KDE
apps compiled with 5.15.2 or 6.2.3.
QFileDialog stores settings in the same settings file across different
Qt versions, using different QDataStream versions. That makes
QFileDialog vulnerable to the issue (QTBUG-104962). A respective auto
test is added with this patch.
Fixes: QTBUG-104962
Pick-to: 6.4 6.3 6.2
Task-number: QTBUG-104425
Change-Id: I666207fca7ab837ad27a247e504a40757ee8afab
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Windows VMs are provisioned with shared folders that are available as
\\${COMPUTERNAME}\testshare(writable)
so we don't need to access a remote SMB server over network anymore just
to test whether our string-parsing code handles UNC paths correctly.
Add a QTest::uncServerName() helper function to the shared filesystem.h
header and use that instead of QtNetworkSettings::winServerName. The
latter is now only used in tst_NetworkSelfTest::smbServer().
Pick-to: 6.4
Change-Id: Id0da66369ad0f4a980d612de2a31a391f1192253
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
I can't reproduce the issue after hundreds of iterations on OpenSUSE,
and the test hasn't flaked at all in the last 3 months according to our
dashboards.
Task-number: QTBUG-66371
Change-Id: I9c4daf851e09fbcb47a6ab39418e7b213ccd9dfe
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
CMakeLists.txt and .cmake files of significant size
(more than 2 lines according to our check in tst_license.pl)
now have the copyright and license header.
Existing copyright statements remain intact
Task-number: QTBUG-88621
Change-Id: I3b98cdc55ead806ec81ce09af9271f9b95af97fa
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Replace the current license disclaimer in files by
a SPDX-License-Identifier.
Files that have to be modified by hand are modified.
License files are organized under LICENSES directory.
Task-number: QTBUG-67283
Change-Id: Id880c92784c40f3bbde861c0d93f58151c18b9f1
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
tst_qmessagebox was disabled because it crashed.
It does not any more. Now it hangs, which
is a new problem.
Fixes: QTBUG-87671
Task-number: QTBUG-101217
Pick-to: 6.2 6.3
Change-Id: Iec15cf82a4112ee79182ec091622e40147bd3e7f
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Now when 71b3d18ea7 is merged,
we can re-enable the previously skipped tests, as they do
not crash anymore.
Task-number: QTBUG-101423
Task-number: QTBUG-101321
Task-number: QTBUG-87417
Pick-to: 6.3 6.2
Change-Id: I6b4b3619b0af5e48b5e92b514bc0ab6586a76d51
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
And remove their uses.
[ChangeLog][QtCore][Deprecation Notice] Deprecated QString::count()
and QByteArray::count() that take no parameters, to avoid confusion
with the algorithm overloads of the same name. They can be replaced
by size() or length() methods.
Change-Id: I6541e3235ab58cf750d89568d66d3b1d9bbd4a04
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This test crashed and prevents other testcases from execution.
The test requires a proper fix, but that's not trivial, so skipping
to enable more tests in the CI for now.
Task-number: QTBUG-101321
Pick-to: 6.3 6.2
Change-Id: I1bd4b1182cc868a36391a718457eae647675fc17
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
This test uses the cursor. However we have no cursor support on Android.
Skip the test instead of blacklisting it, because that is the correct
behavior.
Fixes: QTBUG-87389
Pick-to: 6.3 6.2
Change-Id: I1a2d2dd406b3d7da1bc70b51c2072a83d9a29ca5
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
tst_qfiledialog was disabled because it crashed. It does not any more.
Task-number: QTBUG-87671
Task-number: QTBUG-101194
Pick-to: 6.2 6.3
Change-Id: Icfda2cd01677f3a076b74429fcf66a1de79d2aa9
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Multiple tests use qt_internal_add_resource that copies the
functionality that is already implemented inside the
qt_internal_add_test function. Simplify these test by replacing
the qt_internal_add_resource call with the new BUILTIN_TESTDATA
option.
Change-Id: I18475b817d6f87264f0de53817d6c26c5ccab4e2
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
As with QHoverEvent, it's better to require globalPos rather than
"initialized to QCursor::pos(), which may not be appropriate" as the
docs have pointed out for many years now. This removes the remaining
calls to QCursor::pos() in event constructors.
Task-number: QTBUG-52430
Task-number: QTBUG-69433
Task-number: QTBUG-100324
Change-Id: I076dae56f37abaad7085cc95dddee453a80a45f3
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Check that a file name, not the full path, contains a dot.
Fixes: QTBUG-59401
Pick-to: 5.15 6.2
Change-Id: I193b2ae457a3ac6a460524dbf200786eb3461cef
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
