This will enable all qt internal tools to be able to access files
on paths longer than 255 characters.
Two examples that were not working before: moc and windeployqt.
Fixes: QTBUG-109207
Change-Id: I93f9770f1d3c4f3f2cca4655e4bed89c95b9786b
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In cross builds, we are not creating versioned links for qt tools. This
patch addresses that. I've changed the signature of the
`qt_internal_install_versioned_link` such that it can be used for
non-target as well, so in cross build the qmake or qtmake.bat can be
processed with the same function.
Fixes: QTBUG-109024
Change-Id: I246621c18325d084622ca92b422e815ed06f1381
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
syncqt.pl adds an extra dependency on perl when building Qt. Modern C++
provides the convenient cross-platform way to access a filesystem and
to use regular expressions, so we may replace the perl script with C++
application. The syncqt executable is built at configure time and
installed as QtCore tool. It's running at configure time to deliver the
required header files for IDE to build a consistent code model and at
the build time to keep tracking changes in header files and generate
the missing aliases without reconfiguring. 'syncqt' only parses header
files from a CMake build tree, so the resulting Qt installation only
contains interfacing headers that belong to the platform that Qt is
built for. 'sync.profile' files are not used as the 'source of truth'
for sync qt procedure anymore, all the necessary information is taken
from either CMake files at configure time or from the module header
files while parsing them.
syncqt.pl is still in place since it's required as fallback solution
for a smooth transition to the new syncqt implementation for all qt
repositories.
This patchset only enables the C++ based syncqt for 'qtbase'
repository.
From the performance perspective C++ version works faster then perl
script, also the configure time is reduced significally on subsequent
reconfigurations - up x2 times faster when re-configuring repository,
but it also takes time to compile the tool itself the first time.
Numbers for qtbase:
syncqt.pl syncqt.cpp
initial: 0m16,035s 0m20,413s
reconfig: 0m6,819s 0m3,725s
The syncing procedure can be run separately for each module using
<ModuleName>_sync_headers targets. The 'sync_headers' target can be
used to sync all the modules at once.
Task-number: QTBUG-87480
Task-number: QTBUG-103196
Change-Id: I8c938bcaf88a8713b39bbfd66d9e7ef12b2c3523
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Use PARSE_ARGV signature of the cmake_parse_arguments function to avoid
escaping of semicolons when passing arguments to the
qt_internal_add_configure_time_tool and
qt_internal_add_configure_time_executable function.
Amends ac74b60c9c
Task-number: QTBUG-87480
Change-Id: I343abbd75107e56aaccab6e388db8dbda0525af3
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
qt_internal_add_configure_time_executable compiles the executable
at configure time and exposes it to the CMake source tree. This is
useful when need to run a small C++ program at configure time.
Task-number: QTBUG-87480
Change-Id: I031efe797c8afa0721d75b46d4f36f67276bf46e
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
If Qt itself is built without the deprecated APIs, so should be the
tools and apps.
This patch makes sure that the specified QT_DISABLE_DEPRECATED_UP_TO
and QT_WARN_DEPRECATED_UP_TO values are correctly used in the internal
tools and apps.
Fixes: QTBUG-105102
Change-Id: I7a51bddbd839c7b71efa0bff8ec959df64c53b82
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Replace hardcoded Qt6 prefix of module tools target when setting
the name of tools package.
Change-Id: Icb6f38cce766c9d32216a65a8a5ce9552d622b72
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
CMakeLists.txt and .cmake files of significant size
(more than 2 lines according to our check in tst_license.pl)
now have the copyright and license header.
Existing copyright statements remain intact
Task-number: QTBUG-88621
Change-Id: I3b98cdc55ead806ec81ce09af9271f9b95af97fa
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Warn projects not to use it because PUBLIC_LIBRARIES don't make
sense for executable targets and it also led to some issues in the
internal functions where some of them did not expect to receive
PUBLIC_LIBRARIES.
To ensure builds don't needlessly break, treat PUBLIC_LIBRARIES values
as regular LIBRARIES. In the future we might add an error instead.
Using PUBLIC_LIBRARIES in qt_internal_add_app, etc, accidentally
worked because the option name and the values following it were
parsed as values of the "previous" option, like SOURCES or
INCLUDE_DIRECTORIES or LIBRARIES, and when those got
passed through to qt_internal_extend_target, things magically worked.
We have a lot of projects using PUBLIC_LIBRARIES, mostly due to the
way qmake pro files were written and how pro2cmake converted them.
We'll have to clean up each repo.
Change-Id: I69e09d34afdf98f0d47c08d324643fc986f8131c
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
When recording which package version to look for in
QtFooModuleDependencies.cmake and other files like it,
instead of using PROJECT_VERSION, use the version of the
package that contains the dependency.
For example if we're hypothetically building the qtdeclarative repo
from the 6.4 branch, against an installed 6.2 qtbase, then
the Qt6QmlModuleDependencies.cmake file will have a
find_package(Qt6Core 6.2) call because qtdeclarative's
find_package(Qt6Core) call found a 6.2 Core when it was configured.
This allows switching the versioning scheme of specific Qt modules
that might not want to follow the general Qt versioning scheme.
The first candidate would be QtWebEngine which might want to
follow the Chromium versioning scheme, something like
Qt 6.94.0 where 94 is the Chromium major version.
Implementation notes.
We now record the package version of a target in a property
called _qt_package_version. We do it for qt modules, plugins,
3rd party libraries, tools and the Platform target.
When we try to look up which version to write into the
QtFooModuleDependencies.cmake file (or the equivalent Plugins and
Tools file), we try to find the version
from a few sources: the property mentioned above, then the
Qt6{target}_VERSION variable, and finally PROJECT_VERSION.
In the latter case, we issue a warning because technically that should
never have to happen, and it's a bug or an unforeseen case if it does.
A few more places also need adjustments:
- package versions to look for when configuring standalone
tests and generating standalone tests Config files
- handling of tools packages
- The main Qt6 package lookup in each Dependencies.cmake files
Note that there are some requirements and consequences in case a
module wants to use a different versioning scheme like 6.94.0.
Requirements.
- The root CMakeLists.txt file needs to call find_package with a
version different from the usual PROJECT_VERSION. Ideally it
should look for a few different Qt versions which are known to be
compatible, for example the last stable and LTS versions, or just
the lowest supported Qt version, e.g. 6.2.6 or whenever this change
would land in the 6.2 branch.
- If the repository has multiple modules, some of which need to
follow the Qt versioning scheme and some not,
project(VERSION x.y.z) calls need to be carefully placed in
subdirectory scopes with appropriate version numbers, so that
qt_internal_add_module / _tool / _plugin pick up the correct
version.
Consequences.
- The .so / .dylib names will contain the new version, e.g. .so.6.94
- Linux ELF symbols will contain the new versions
- syncqt private headers will now exist under a
include/QtFoo/6.94.0/QtFoo/private folder
- pri and prl files will also contain the new version numbers
- pkg-config .pc files contain the new version numbers
- It won't be possible to write
find_package(Qt6 6.94 COMPONENTS WebEngineWidgets) in user code.
One would have to write find_package(Qt6WebEngineWidgets 6.94)
otherwise CMake will try to look for Qt6Config 6.94 which won't
exist.
- Similarly, a
find_package(Qt6 6.4 COMPONENTS Widgets WebEngineWidgets) call
would always find any kind of WebEngine package that is higher than
6.4, which might be 6.94, 6.95, etc.
- In the future, if we fix Qt6Config to pass EXACT to its
subcomponent find_package calls,
a find_package(Qt6 6.5.0 EXACT COMPONENTS Widgets WebEngineWidgets)
would fail to find WebEngineWidgets, because its 6.94.0 version
will not be equal to 6.5.0. Currently we don't pass through EXACT,
so it's not an issue.
Augments 5ffc744b79
Task-number: QTBUG-103500
Change-Id: I8bdb56bfcbc7f7f6484d1e56651ffc993fd30bab
Reviewed-by: Michal Klocek <michal.klocek@qt.io>
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
...when QT_BUILD_TOOLS_WHEN_CROSSCOMPILING is ON.
When QT_BUILD_TOOLS_WHEN_CROSSCOMPILING is ON, we want to set
QT_FORCE_BUILD_TOOLS. But this happened too late: after the
initialization of QT_BUILD_TOOLS_BY_DEFAULT. This value depends on
QT_FORCE_BUILD_TOOLS.
This amends commit acfbe3b779.
Change-Id: Ibdba54da943aea1b55618f10d2b8485f4390878a
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Replace BOOTSTRAP option with the single value CORE_LIBRARY argument
in qt_internal_add_tool and qt_internal_add_executable functions.
The introduced argument now may accept 'Bootstap' and 'None' values.
Use 'Bootstap' to link Qt::Boostrap library instead Qt::Core or 'None'
to avoid any core library linking. This is useful for tools that need
to use the CMake deployment routines, but not require the Qt::Core
functionality.
Task-number: QTBUG-87480
Change-Id: I64a8b17f16ac5fe43c6b385252dc21def0c88d2c
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Previously, this was only supported when cross-compiling, but that's an
unnecessary limitation. Instead, make it possible to build the "host"
tools (notably qmake) even when they've been found elsewhere due to
QT_FORCE_FIND_TOOLS=ON and a supplied QT_HOST_PATH.
The combination of QT_FORCE_FIND_TOOLS and QT_FORCE_BUILD_TOOLS set to
ON is useful for developers who touch content that ends up in the
bootstrap library.
QT_BUILD_TOOLS_WHEN_CROSSCOMPILING is deprecated in favor of
QT_FORCE_BUILD_TOOLS.
[ChangeLog][CMake] QT_BUILD_TOOLS_WHEN_CROSSCOMPILING has been
deprecated in favor of QT_FORCE_BUILD_TOOLS. The latter can be used in
combination with QT_FORCE_FIND_TOOLS and QT_HOST_PATH to use tools from
a host Qt even for a non-cross build and still build the tools.
Fixes: QTBUG-99683
Change-Id: I0e5f6bec596a4a78bd3bfffd16c8fb486181f9b6
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
CMake has logic to rewrite build rpaths that contain
CMAKE_STAGING_PREFIX to instead point to CMAKE_INSTALL_PREFIX.
This breaks running executables from the build directory, because
their build rpath will point to a location where the libraries might
not exist yet (we didn't install Qt yet).
Work around this by setting CMAKE_STAGING_PREFIX to a fake path, so
that CMake does not do the rewriting anymore.
CMAKE_STAGING_PREFIX needs to be set at subdirectory scope, not
function scope, which is why
qt_internal_apply_staging_prefix_build_rpath_workaround() is a macro
that is called from within each Qt internal function that creates
a target.
The workaround can be disabled by configuring with
-DQT_NO_STAGING_PREFIX_BUILD_RPATH_WORKAROUND=ON
The downside of this workaround is that it breaks per-subdirectory
install rules like 'ninja src/gui/install'.
Regular global installation like 'ninja install' works fine.
This is similar to what we do for tests in
qt_set_up_fake_standalone_tests_install_prefix()
introduced by 20292250d4
The reason it's not as good for other target types is because in
contrast to tests, we do want to install them.
In case if someone does call `ninja src/gui/install' they will most
likely get a permission error, telling them it's not possible to
install into
/qt_fake_staging_prefix/
check_qt_internal_apply_staging_prefix_build_rpath_workaround
Fixes: QTBUG-102592
Change-Id: I6ce78dde1924a8d830ef5c62808ff674c9639d65
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
If there's no qt.toolchain.cmake used, QT_HOST_PATH_CMAKE_DIR is not
set. Use the location calculated from the Qt6HostInfo package in that
case.
This amends commit e044c94a61.
Pick-to: 6.2 6.3
Change-Id: I99aed8e920b8c1aa6efd8f18301cc34aca5559ca
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
When installing conan packages we have one installation prefix per
package. When cross-building a conan package, we need to make known
those multiple host prefixes to Qt, analogous to
QT_ADDITIONAL_PACKAGES_PREFIX_PATH.
Pick-to: 6.2 6.3
Fixes: QTBUG-94524
Change-Id: I68cbede350f95266a5fd3559e9b9c214c5858eed
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
One can now set QT_FORCE_FIND_TOOLS to ON together with passing a
QT_HOST_PATH to ensure that a new desktop build uses
already existing tools from a different Qt host (desktop) installation.
Depends on a0e56294c1
to work, which is not in 6.2, but this change is still included in
6.2 because it cleans up the conditions a bit to make them more clear.
Amends 42d3b21c92
and 5a779a4ad3
Pick-to: 6.2
Fixes: QTBUG-95099
Task-number: QTBUG-97658
Change-Id: If6258fb1091c6c1e457f22ae5f468b811bd20d57
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
When cross-building, qt_internal_add_tool would accidentally find device
QtFooTools CMake packages as a result of calling find_package. It should
have found host Tools packages instead.
The reason was due to a combination of setting
CMAKE_FIND_ROOT_PATH_MODE_PACKAGE to BOTH, find_package preferring
the lookup of packages in CMAKE_FIND_ROOT_PATH before CMAKE_PREFIX_PATH
and there being a Tools package in the device sysroot.
Because qt_internal_add_tool didn't adjust CMAKE_FIND_ROOT_PATH to
contain the host path, the device package was picked up.
Change the implementation not to set CMAKE_FIND_ROOT_PATH_MODE_PACKAGE
and instead modify both CMAKE_FIND_ROOT_PATH and CMAKE_PREFIX_PATH
to prefer the host packages instead.
This aligns to the behavior that was introduced in
ec90f9013b
which is used in QtModuleDependencies when looking for Tools packages.
Pick-to: 6.2
Fixes: QTBUG-97599
Change-Id: I8e38284774ae97981ccfd5071465609f3de80f01
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
When building Qt repos, all find_package(Qt6) calls request a
PROJECT_VERSION version which is set in .cmake.conf via
QT_REPO_MODULE_VERSION.
This means trying to configure qtsvg from a 6.3 branch using a
6.2 qtbase won't work, because qtsvg will call find_package(Qt6 6.3)
and no such Qt6 package version exists.
There are certain scenarios where it might be useful to try to do
that though.
One of them is doing Qt development while locally mixing branches.
Another is building a 6.4 QtWebEngine against a 6.2 Qt.
Allow to opt out of the version check by configuring each Qt repo
with -DQT_NO_PACKAGE_VERSION_CHECK=TRUE. This setting is not
recorded and will have to be set again when configuring another
repo.
The version check will also be disabled by default when configuring
with the -developer-build feature. This will be recorded and embedded
into each ConfigVersion file.
If the version check is disabled, a warning will be shown mentioning
the incompatible version of a package that was found but that package
will still be accepted.
The warning will show both when building Qt or using Qt in a user
project.
The warnings can be disabled by passing
-DQT_NO_PACKAGE_VERSION_INCOMPATIBLE_WARNING=TRUE
Furthermore when building a Qt repo, another warning will show when an
incompatible package version is detected, to suggest to the Qt builder
whether they want to use the incompatible version by disabling the
version check.
Note that there are no compatibility promises when using mixed
non-matching versions. Things might not work. These options are only
provided for convenience and their users know what they are doing.
Pick-to: 6.2
Fixes: QTBUG-96458
Change-Id: I1a42e0b2a00b73513d776d89a76102ffd9136422
Reviewed-by: Craig Scott <craig.scott@qt.io>
Introduce a new macro qt_internal_return_unless_building_tools which
simply calls return() if tools are not built. This macro is supposed to
be called after qt_internal_add_tool().
Using this macro avoids having to special-case code for when
qt_internal_add_tool() creates imported targets in cross-builds.
Adjust pro2cmake accordingly.
Task-number: QTBUG-85084
Change-Id: I9e1c455c29535dd8c318efa890ebd739c42effc1
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Debug tools are excluded from the ALL target for debug_and_release
builds. However, when using the -separate-debug-info option, the same
exclusion wasn't being applied for their dSYM INSTALL commands,
resulting in a CMake install error.
Pass any additional install args like
EXCLUDE_FROM_ALL COMPONENT "ExcludedExecutables"
to the installation rules of qt_enable_separate_debug_info and
install dSYMs for executables per-config in a multi-config build.
All the non-main config executable install rules are optional because
the non-main config executables are excluded from ALL.
Amends 5b136abd21
Pick-to: 6.2
Fixes: QTBUG-93999
Change-Id: I95c3ce28215c3ee535551e4b7a5fa9731f8f1c28
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
In a -debug-and-release build, apps were placed under bin/Release
rather than just bin.
Apply the logic we use for tools for apps as well. Rename and move
the common functions into QtTargetHelpers.cmake.
Pick-to: 6.2
Fixes: QTBUG-95028
Change-Id: I5a9082ea50c9238c8fcf0c6dd099708fbc571bf8
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
User projects can set the QT_PROMOTE_TO_GLOBAL_TARGETS variable to
true so that the various imported targets created by find_package(Qt6)
are promoted to global targets.
This would allow a project to find Qt packages in a subdirectory scope
while using those Qt targets from a different scope.
E.g. it fixes errors like
CMake Error at CMakeLists.txt:5 (target_link_libraries):
Error evaluating generator expression:
$<TARGET_OBJECTS:Qt6::Widgets_resources_1>
Objects of target "Qt6::Widgets_resources_1" referenced but no such
target exists.
when trying to use a static Qt from a sibling scope.
Various 3rd party dependency targets (like Atomic or ZLIB) are not
made global due to limitations in CMake, but as long as those targets
are not mentioned directly, it shouldn't cause issues.
The targets are made global in the generated
QtFooAdditionalTargetInfo.cmake file.
To ensure that resource object libraries promoted, the generation
of the file has to be done at the end of the defining scope
where qt_internal_export_additional_targets_file is called,
which is achieved with a deferred finalizer.
Replaced all occurrences of target promotion with a helper function
which allows tracing of all promoted targets by specifying
--log-level=debug to CMake.
Pick-to: 6.2
Fixes: QTBUG-92878
Change-Id: Ic4ec03b0bc383d7e591a58c520c3974fbea746d2
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
...and make it consistent with that of qt_internal_add_module.
Make EXTRA_CMAKE_FILES a multi value keyword.
Do not add include statements for every file in EXTRA_CMAKE_FILES.
Add the EXTRA_CMAKE_INCLUDES argument to specify includes.
This enables us to specify EXTRA_CMAKE_FILE that are not included.
Change-Id: I1a3667473b94ee44363b554ab9e6c380e5c11389
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Add the option argument INSTALL_VERSIONED_LINK to qt_internal_add_tool
and qt_internal_add_app. For tools/apps with this argument we create an
install rule that creates a versioned hard link. For example, for
bin/qmake we create bin/qmake6.
Note that this only applies to prefix builds.
Apply this argument to qmake.
The qt_internal_add_app change is necessary for qtdiag and in qttools.
Task-number: QTBUG-89170
Change-Id: Id32d6055544c475166f4d854aaeb6292fbb5fbb5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
(cherry picked from commit c19d957f45fa27f61b5ecc566f8dbc19f12a44c3)
Fix the name in the function's doc comment and error messages.
Pick-to: 6.1
Change-Id: I918db802a0dbb0508f65d227f7c896d2ad0beeae
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Craig Scott <craig.scott@qt.io>
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
When packaging different Qt versions for Linux distributions (or any
distribution with a common bin dir), Qt tools cannot be installed to
/usr/bin, because the executable names of the different Qt versions
clash.
To solve this conflict, our recommendation is to install Qt's tools to
/usr/lib/qt6/bin and to create versioned symlinks to user-facing tools
in /usr/bin.
User-facing tools are tools that are supposed to be started manually by
the user. They are marked in Qt's build system. Distro package
maintainers can now configure with
-DCMAKE_INSTALL_PREFIX=/usr
-DINSTALL_BINDIR=/usr/lib/qt6/bin
-DINSTALL_PUBLICBINDIR=/usr/bin
and will find a file called user_facing_tool_links.txt in the build
directory after the cmake run. Nothing will be installed to
INSTALL_PUBLICBINDIR.
Each line of user_facing_tool_links.txt consists of the installation
path of a user-facing application followed by a space and the versioned
link name in INSTALL_PUBLICBINDIR.
Example content:
/usr/lib/qt6/bin/qmake /usr/bin/qmake6
To actually create the versioned symlinks, the content of this file can
be fed to ln like this:
xargs ln -s < build-dir/user_facing_tool_links.txt
Or the package maintainer may decide to do something completely
different as suits their needs.
This patch adds the USER_FACING argument to qt_internal_add_tool to mark
tools as user-facing. In addition, every Qt created by
qt_internal_add_app is treated as user-facing.
The only tool this patch marks as user-facing in qtbase is qmake.
Pick-to: 6.1
Fixes: QTBUG-89170
Change-Id: I52673b1c8d40f40f56a74203065553115e2c4de5
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Move the qmake-specific logic of the QLibraryInfo class to
qmake internals. 'qconfig.cpp.in' now stores information about
the library info entries to keep them consistent between qmake
and the Core library. qmake requires specific features enabled
in the Core library, so building qmake will be skipped if the
features are not enabled.
All flags directly related to the qmake have been removed from
Core lib.
Remove all bootstrap related sections from qmake CMakeLists.txt
Task-number: QTBUG-89369
Change-Id: I26de157d3bfd4a5526699296e9d46e1c180b89ae
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Add the INSTALL_DIR argument to qt_internal_add_tool to allow
installation of tools in other locations than INSTALL_BINDIR.
Pick-to: 6.1
Task-number: QTBUG-88791
Change-Id: I88ede81a4c13c82f6d209156d3801ce130f8fc10
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Craig Scott <craig.scott@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
When a CMake release introduces a new policy that affects most Qt
modules, it may be appropriate to make each module aware of that newer
CMake version and use the NEW policy without raising the minimum CMake
version requirement. To reduce the churn associated with making that
change across all Qt modules individually, this change allows it to be
updated in a central place (qtbase), but in a way that allows a Qt
module to override it in its own .cmake.conf file if required (e.g. to
address the issues identified by policy warnings at a later time). The
policies are modified at the start of the call to
qt_build_repo_begin().
For commands defined by the qtbase module, qtbase needs to be in
control of the policy settings at the point where those commands are
defined. The above mechanism should not affect the policy settings for
these commands, so the various *Config.cmake.in files must not specify
policy ranges in a way that a Qt module's .cmake.conf file could
influence.
Starting with CMake 3.12, policies can be specified as a version range
with the cmake_minimum_required() and cmake_policy() commands. All
policies introduced in CMake versions up to the upper limit of that
range will be set to NEW. The actual version of CMake being used only
has to be at least the lower limit of the specified version range.
This change uses cmake_minimum_required() rather than cmake_policy()
due to the latter not halting further processing upon failure.
See the following:
https://gitlab.kitware.com/cmake/cmake/-/issues/21557
Task-number: QTBUG-88700
Pick-to: 6.0
Change-Id: I0a1f2611dd629f847a18186394f500d7f52753bc
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
For consistency, apply the following renamings:
QT_NO_MAKE_EXAMPLES -> QT_BUILD_EXAMPLES_BY_DEFAULT
QT_NO_MAKE_TESTS -> QT_BUILD_TESTS_BY_DEFAULT
QT_NO_MAKE_TOOLS -> QT_BUILD_TOOLS_BY_DEFAULT
BUILD_EXAMPLES -> QT_BUILD_EXAMPLES
BUILD_TESTING -> QT_BUILD_TESTS
This should help to better convey the difference between "BUILD" and
"NO_MAKE".
To configure tests, but not to build them by default, pass the
following to CMake:
-DQT_BUILD_TESTS=ON -DQT_BUILD_TESTS_BY_DEFAULT=OFF
Analoguous for examples:
-DQT_BUILD_EXAMPLES=ON -DQT_BUILD_EXAMPLES_BY_DEFAULT=OFF
Tools can be excluded from the default build with:
-DBUILD_TOOLS_BY_DEFAULT=OFF
The variable BUILD_TESTING is still available and initialized with the
value of QT_BUILD_TESTS.
Pick-to: 6.0 6.0.0
Change-Id: Ie5f29dfbdca8bfa8d687981dfe8c19c0397ca080
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
In multi-config builds (which equals the debug-and-release feature) we
exclude tools of the non-main configurations from the default build.
But we still create installation rules for them. Mark those as optional
to avoid "cmake --install" yielding errors if those tools weren't built.
Fixes: QTBUG-85411
Change-Id: Ic2d3897d1a1c28a715d9a024ec8606fff00e0315
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Now all shared libraries and executables will get .debug files on
the platforms that support FEATURE_separate_debug_info
With the directory property _qt_skip_separate_debug_info certain
targets can retain the debug symbols in the binary e.g. lupdate with
MinGW 8.1.0 will cause objcopy / strip to fail.
Fixes: QTBUG-87015
Change-Id: I03b106e68ef0a42011d1ba641e6f686b2e7b7fb4
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Add an EXTRA_CMAKE_FILES argument to qt_internal_add_tool()
that allows tools to install an additional Macro.cmake file.
This is modelled after similar functionality in qt_internal_add_module.
Task-number: QTBUG-87870
Change-Id: I80838b8966f1018fdd379b1da877b6bc418de075
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
...for QT_BUILD_TOOLS_WHEN_CROSSCOMPILING.
qt_internal_export_additional_targets_file now gets two lists of target
names when run from qt_export_tools:
- TARGETS containing actually existing targets, and
- TARGET_EXPORT_NAMES containing the target names as they appear in the
additional target info file.
Operations that require actual targets are run on the TARGETS, in the
additional target info file only TARGET_EXPORT_NAMES are written.
This distinction is required for the case where the host Qt lacks a
tool that is built in the target Qt.
Example: host Qt is built with DEVELOPER_BUILD=OFF, target Qt is built
with DEVELOPER_BUILD=ON. Then the host Qt lacks qmljs, but it is built
in the target Qt. TARGETS contains qmljs_native, and
TARGET_EXPORT_NAMES contains qmljs.
Fixes: QTBUG-87693
Change-Id: I615aed996bfcbe654274defcda8c1cb2cc4b7b4e
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
When loading the tool packages from the host Qt we must ignore
QT_NO_CREATE_TARGETS. Otherwise tool targets like Qt6::moc are not
available.
Task-number: QTBUG-85080
Change-Id: I2c8c8e68863f28a4f1d9cd2f70090455c49d8df2
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
All usages should be replaced with qt_internal_add_executable instead.
This should fix configuration failure of benchmarks and manual tests.
Amends e0c62a48b8
Task-number: QTBUG-86815
Change-Id: I0791d849998ed9517e32f699d843367949b97cb9
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Supports installing linker generated debug info for shared libraries
and executables, as well as compiler generated debug info for static
libraries.
Works with Ninja Multi-Config as well, with the caveat that the files
are installed optionally, aka the install rule will not error out if
a pdb file is not present. This is necessary, because it's not
possible to create per-config install rules properly.
Fixes: QTBUG-87006
Change-Id: I95e91a6557eb0ee0f882103be54cd38795c349f7
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This ensures that we have the configuration-independent IMPORTED_*
properties set on tools.
Fixes: QTBUG-86893
Change-Id: I2b772c21341e6e4631379d4a5a99580ec96909ed
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Offer compatibility wrapper functions until we update all of the Qt
repos to use the new names.
Task-number: QTBUG-86815
Change-Id: I5826a4116f52a8509db32601ef7c200f9bd331de
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
QtBuild.cmake is huge. Split it.
Move module, plugin, tools, executables and test related functions out
of QtBuild.cmake into separate files.
Do the same for many other things too.
An additional requirement is that all the new Helpers files only
define functions and macros.
No global variable definitions are allowed, nor execution of commands
with side effects.
Some notes:
qt_install_qml_files is removed because it's dead code.
Some functions still need to be figured out, because they are
interspersed and depend on various global state assignments.
Task-number: QTBUG-86035
Change-Id: I21d79ff02eef923c202eb1000422888727cb0e2c
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
