Add new method to return if the current time is Daylight Time.
[ChangeLog][QtCore][QDateTime] Added new method isDaylightTime() to
return if the datetime is in Daylight Time or not.
Change-Id: Icb93fd5dd0b2f7d83d2d4643eeb12922c1137e3e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When Daylight Time transtion goes from Standard Time to Daylight Time
there is a "missing" hour, i.e. at 2am CET the clock goes forward to
3am. Currently QDateTime ignores this gap and considers the time to be
valid and able to be manipulated. This change respects the transition,
so any time set in the missing hour is considered invalid, and any date
maths returns valid results.
The validity in the current time zone needs to be checked every time
isValid() is called in case the system time zone has changed since the
last time it was checked. This is done by calling mktime to check the
returned result matches the expected result. This could be very
inefficient, but the returned offset value is cached each time so
mktime is not required to be called again within each method call,
effectively meaning mktime is called the same number of times by
each method. Note that this means any new methods added must be
careful to ensure either isValid() or refreshLocalTime() is called
first by any method needing to use the UTC value.
[ChangeLog][QtCore][QDateTime] The Standard Time to Daylight Time
transition for Qt::LocalTime is now handled correctly. Any date set
in the "missing" hour is now considered invalid. All date math results
that fall into the missing hour will be automatically adjusted to a
valid time in the following hour.
Change-Id: Ia652c8511b45df15f4917acf12403ec01a7f08e7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change from storing the date and time as QDate and QTime to a serialised
msecs format. This format is a direct translation of the QDate and
QTime values, it is not the actual msecs since the Unix epoch. This
msecs format ensures we are always able to recreate the original QDate
and QTime values, but should still simplify the code and improve
performance.
Because we no longer store the explicit date and time we need to store
their isNull()/isValid() status separately.
The changes in storage results in the same memory footprint as before.
Note that this change does not optimize the code nor set out to fix the
known bugs, it only seeks to maintain the current behavior, although
some bugs are fixed implicitly. More bug fixes and optimizations will
follow.
[ChangeLog][Important Behavior Changes] The supported date range in
QDateTime has been reduced to about +/- 292 million years, the range
supported by the number of msecs since the Unix epoch of 1 Jan 1970
as stored in a qint64, and as able to be used in the
setMSecsSinceEpoch() and toMSecsSinceEpoch() methods.
Change-Id: I98804d8781909555d3313a3a7080eb8e70cb46ad
Reviewed-by: Sérgio Martins <sergio.martins@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This avoids the assertion in iaccessible2.cpp(510)
Change-Id: I1a4c007ffcbcda70f0e37ef3cf55a303683b58c1
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
The test has been failing on all platforms. Usually it just times out,
but it also have behavied flaky, failing with different error codes
when executed twice in a row.
Task-number: QTBUG-29403
Change-Id: Ic06638f0ffd23131b4c1aa4136f715195727e959
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
This allows the application developer to restructure the application,
including moving the central widget some place else.
Change-Id: Idca2f74c190500db24404e020b0eb400e41aad10
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
There is no point in having QAccessible2, so merge it with the normal
QAccessible. The header will be removed in a subsequent commit as it is
still needed by declarative at this point in time.
Change-Id: I1fc47d484d482f25387eba827bc5a373536b7a8b
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
There was a disagreement between the a11y plugin and QTreeView
whether the horizontal header should have been exposed or not.
When the header was hidden, this resulted in that we sent an event
with a child id that was wrong, or in worst case higher than
QAI::childrenCount(). This was the reason we got the warning
output as described in the task.
With this commit, we consistently *expose* hidden headers both for
QTreeView and QTableView, but ensure that their state().invisible is
set to true instead.
This makes it consistent with how hidden cells are exposed.
This also fixes a bug in QTableViewPrivate::accessibleTable2Index
where we always added 1 to the index, which was spotted while
writing the test.
Task-number: QTBUG-33247
Change-Id: Ifd1f83d56296dd071424fdb81fce7628bc24fe0a
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Similar to commit 8b062418 (MetaType: Fix operator{+,-}(int)
with the type-erased const_iterators., 2013-09-11), explicitly
create a copy of the iterator and intialise it.
Change-Id: I8b9edef40ca00c826f72768cba4a0992e55371f8
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Up to now, it was only possible to connect to functors in a direct
way, without being capable of using Qt::ConnectionType. This patch
allows for specifying a receiver for Functors and function
pointers, hence making it possible to specify effectively the
connection type.
To do this properly, it was needed to add an enum in FunctionPointer
representing whether the considered function is a member function
or not, to reduce ambiguity upon overloaded calls.
Moreover, now senders are checked for the existence of a slot obj
as well. This way, should the context be freed, the slot obj and
the functor contained in it will be freed as well.
On a side note, connecting to a static slot
(like QCoreApplication::quit) specifying the receiver object is
now compiling.
Change-Id: I46474099413b1dc6ca4db9934191d469baeef070
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
For easy cross-platform and cross-device UIs, automatic asset swapping
based on filename is being developed. This API provides the logic for
the swapping, so that applications can use it themselves with the same
logic as any automatic swapping done in application templates.
Selector set is initially minimal, aiming for just platform selection
and enabling a common selection mechanism for Qt platforms to use.
Change-Id: I219517d740fa7385e923a9e09cb7e241378f857a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The responsibility of sendWindowSystemEvents() is to process events from
the window system. Historially that logic was part of the QPA/QWS event
dispatcher, which naturally also sent posted events. Through refactoring,
the code at some point ended up in in the QWindowSystemInterface class,
still with the posting of events in place.
This resulted in QPA event dispatchers adopting a pattern of just calling
sendWindowSystemEvents(), as that would cover both posted and window system
events. Other event dispatchers would call sendWindowSystemEvents(), and
then use a base-class implementation from QtCore for processing events,
resulting in two calls to QCoreApplication::sendPostedEvents() per
iteration of processEvents(). This breaks the contract that processEvents
will only process posted events that has been queued up until then.
We fix this entanglement by removing the sendPostedEvents() call from
QWindowSystemInterface::sendWindowSystemEvents() and move it to the
respective event dispatchers. For some EDs it means an explicit call
to sendPostedEvents, while others were already doing sendPostedEvents
though a separate source (GLib), or using a base-class (UNIX/BB), and
did not need an extra call.
We still keep the ordering of the original sendWindowSystemEvents()
function of first sending posted events, and then processing any
window system events.
Task-number: QTBUG-33485
Change-Id: I8b069e76cea1f37875e72a034c11d09bf3fe166a
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
This also fixes it in case of hidden or system files, which
were missing from the filter (found by Denis Kovalskiy).
Change-Id: Ic12de12ec51c20de52d040514e90be5e783add43
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Q_STATIC_ASSERT gives better error with C++11 enabled.
Aslo the qt_check_for_QOBJECT_macro had warning on some compiler since
it used null reference
Change-Id: Ic6115da800064b00c50a5762f0b79f5f656bf750
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A number of QDateTime functions directly use or modify the data stored
in the private, but future changes to store msecs and status make this
maintenance more complicated. Where possible simplify this code to use
the standard msecs functions, standard constructors, or public api
instead. This greatly simplifies the functions and the following msecs
storage code changes.
This is an intermim step towards storing the time in msecs. Some
functions will be slower as a result of this change, optimization
will take place after all the msecs changes are completed.
Note this also removes a test that used valid QDates outside the range
of msecs, this change in behavior will be documented in the final
mscs change.
Change-Id: I6ef710f24babc7024091010064082e9be0b5bbfe
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Test the Daylight Time transitions. QDateTime does not correctly deal
with many of these scenarios so those tests are marked as QEXPECTFAIL.
These bugs will be progressively addressed in coming commits.
Change-Id: I01eba9d6143a792f081542cb198e221efcf28e98
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
The "base64url" encoding is defined in RFC 4648, which is the newest
version of Base64. There are also a few situations where the ending
'=' is not desired.
Change-Id: I9bb9fa55817b57d125189e4e795d6fde97caea6d
Reviewed-by: Richard J. Moore <rich@kde.org>
Add new public api to get and set the number of msecs since the start
of the day. Modify QDateTime to use the new msecs api.
[ChangeLog][QtCore][QTime] Added new methods fromMSecsSinceStartOfDay()
to create a new QTime from an msecs value, and msecsSinceStartOfDay()
to return the QTime as the number of msecs since the start of the day.
Change-Id: I285b725b883f1f5524fda87ca81bd64ed99fe6f4
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
This avoids dynamic construction of the private class. According to
the benchmark we go from 4,550 to 3,900 instruction reads per iteration.
(without change 32629676 the baseline is 5,600)
Change-Id: I5df925e30dbd49bdde87173e481820574ce5abe1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Make sure we don't modify the lhs. Instead copy it and advance the
copy.
Change-Id: I3440e8e175bfc299f8f83b816faca54fa3f79e43
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
A module plugin in qml belongs to a URI/namespace. This
uri is resolved run-time by QtDeclarative by knowing the
path of the qmldir that references the plugin.
For static plugins this becomes a problem, since we lost
the information regarding which plugin belongs to which
qmldir, since a static plugin has no file path.
To avoid pushing the responsibility of clarifying this
onto the application developer, it is better to embed this
information into the meta data of the plugins themselves.
Since this information can be resolved by the
build system, a new option to moc has been added:
-M<key=value>
that will let you add meta tags to the meta data from
the command line to each class that has an IID specified.
For the URI case, we can then e.g do:
-Muri=QtQuick.Controls -Muri=QtQuick.Controls.Private
Change-Id: I81a156660148fc94db6f3cac0473e9e1c8458c58
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
These structures do not need to be packed. With some compilers, Q_PACKED
was defined to be empty, which means that the code was working fine
without packing. Or there were some lingering problems on those
platforms (MSVC) and we're now exposing them in all platforms.
Actually, it shouldn't be a problem anywhere. QCharAttributes, quint24
and QFontEngineQPA::Glyph have only char/uchar members, so they're
packed already (they have alignof == 1). The only platform where that
wasn't true was ARM OABI, which we don't support anymore.
QFontEngineQPA::Header seems to always come from a QByteArray, so it
doesn't neeed to be packed either. However, just to be sure, I'm
inserting a check for alignment.
And QFontEngineQPA::Block isn't used anywhere.
Change-Id: Iacfa25edf336ef2a03aeb6e40ae90937a21661ae
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Any known smart pointer in a QVariant can be handled in this way. The
metatype system can be informed of new smart pointer types using an
existing macro which is now documented.
This is very similar to the existing infrastructure
for containers.
Change-Id: Iac4f9fabbc5a0626c04e1185d51d720b8b54603d
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
New functions left, right, mid were missing in the api.
Change-Id: I3590a84431555d009d5012b204c111385bdceed3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
which would interpret 'path' as a hostname.
The check is in the public setPath so that the internal one can still
support parsing URLs such as ftp://ftp.example.com//path.
[ChangeLog][Important Behavior Changes][QUrl and QUrlQuery]QUrl now
normalizes the path given in setPath, removing ./ and ../ and duplicate
slashes.
Change-Id: I05ccd8a1d813de45e460384239c059418a8e6a08
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
-DKEY="VALUE" was correctly turned into -DKEY=VALUE,
but -DKEY=\"VALUE\" was turned into -DKEY=\VALUE"
due to the erroneous check ('quote' is still 0 when
encountering the first '\' character).
This fixes QCoreApplication::arguments() as used by
moc.exe after porting to QCommandLineParser.
Further investigation shows that double-quotes and single-quotes
are handled differently. The tests now ensure that this parser
respects what Windows sends in argv, and in particular that
QTBUG-15379 doesn't regress, as well as fixing QTBUG-30628.
Task-number: QTBUG-15379, QTBUG-30628
Change-Id: I95062c9a6022632b321b2f6fae3089f07be7b5c6
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
As of 5.0, this always return true.
Change-Id: If225c7219e283da97e870f0d66a87b21c3cacfc0
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Replace that need with a macro so that registration of the
container helper conversions is done at the time of registration
of the container (usually when it is put into a QVariant).
Change-Id: I823fb3fdbce306ebc9f146675ac43724cec678d5
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
To be consistent with signals which are public since Qt5.
Change-Id: I633077e37d0851b118c22da0681e8b8b1892ddbb
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
QMap explicitly sorts its entries by key value. For an ordered container
it's (often?) useful to access the first or last entry, for instance to
quickly compute the next key of the mapping. The first entry is easily
accessible by the STL begin() method, but for accessing the last entry
pretty ugly iterator arithmetics must be applied: *(end() - 1). With
their first() and last() accessors the container classes QList and
QVector provide a much nicer method of accessing extrema, so for
consistency this syntactical sugar also should be applied to QMap.
Change-Id: Ibd544acbad8c3ac16f12a1e74362207ea1694375
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Do the same as in mousePressEvent.
Otherwise it is not possible to handle the event
in one of the graphics views parents.
Task-number: QTBUG-8061
Change-Id: I67c7635361a9ed595c513c28ea016e6253fa2101
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
Change the debug format from Qt::TextDate to a more detailed ISO style
format including better time spec output.
[ChangeLog][QtCore][QDateTime] The debug datastream is now an ISO-like
format instead of Qt::TextDate
Change-Id: Iddbb8199c3bfbf7bca845482617e7a85da43259d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Before this patch,
qRegisterMetaType<QSharedPointer<double> >("QSharedPointer<double>")
without a metatype declaration fails to compile, whereas it works
with Qt 5.1 (ie, before commit e9a69c3ba9)
Change-Id: I9408f711c9df810ff29b879b7696dab81c1160f1
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Clean-up the implementation of toString() and fromString() methods in
QDate, QTime and QDateTime code to be more consistent in ISODate and
TextDate behavior, especially when handling TimeSpec.
Reformat some code so all methods are consistent in appearance and
function to make maintenance easier.
This changes some corner-case behavior in TextDate and ISODate, but
this either fixes bugs or makes the behavior match the documentation.
Change-Id: I457aa1d7cd4f448cd9f8a2e80ec635f3cb98e58c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
Switch the implementation of toString() methods in QDate, QTime and
QDateTime to use the QLocale formatter, and remove the now redundant
QDateTime formatter.
Change-Id: Ie4f17c8a6e31acde3ce066f19835bb2b83351ce8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
Modify the QLocale date formatter to be consistent with the QDateTime
date formatter and able to replace the QDateTime formatter in a
subsequent change.
Fix the treatment of negative years.
The internal QLocale::timeZone() has been replaced by the
QDateTime::timeZoneAbbreviation() to ensure the correct tz for the
date/time is used rather than always the current system default.
Change-Id: I2ef26700856e2e69b979069226aa504ecbb50071
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
this enables forwarding standard input from the parent process.
Change-Id: I7ee72b9842acc96320d4da693b95dd15d9a7b4d4
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
