Instead of first finding it and then testing that we can find it.
Change-Id: I1a1090693520b1d6adadef93839f25d277947e76
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Task-number: QTBUG-28540
Change-Id: I916d104c8aba551ee9a5b34da3fd85dcb26bbf64
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
unlike the real compiler, moc does not have these directories built in,
so it would not find headers from a system install of qt.
Task-number: QTBUG-28870
Change-Id: I86f18cdc8953145190163746dae59f4e784f2d78
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Change-Id: I16e05b72e57473239b89498313ba7745ffa6a346
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
otherwise they would inherit it from qtbase, which may effectively
result in a lie if building against a different release.
for convenience we define the version centrally per repo.
qtbase is special, in that we use the version defined in qglobal.h to
avoid defining it redundantly (the instance in qglobal.h is currently
needed to bootstrap qmake; the configures would need some work to change
this).
Task-number: QTBUG-29838
Change-Id: Ie9a5b0ff0d64b69ff2d34af2f7c42d6278e957cc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Currently the Qt5_MODULE_TEST_DEPENDS variable is maintained individually
in each repo. This patch makes that obsolete.
Change-Id: I1a72bb4da70b9ace6f79296d6a3fb295eaa999ff
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
These will be used by ctest_testcase.prf.
Change-Id: I8a0e6e1eb110daba41b007c8309f3cb9a2059ecb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This way, the Release library is chosen if Qt is configured to
build both debug and release, and if the consumer configuration
is not an exact match for 'Debug'.
This means that RelWithDebInfo and MinSizeRel, which are 'standard'
configurations in CMake with mulit-configuration generators, will use
the Release version of Qt. All other configurations will also use the
Release version, unless MAP_IMPORTED_CONFIG_<CONFIG> is used as
described in:
http://doc-snapshot.qt-project.org/5.0/qtdoc/cmake-manual.html
and in the cmake documentation:
http://www.cmake.org/cmake/help/v2.8.10/cmake.html#prop_tgt:MAP_IMPORTED_CONFIG_CONFIG
Task-number: QTBUG-29186
Change-Id: Ifc11a9e19fcb304297c204e34a3b25c510329767
Reviewed-by: Brad King <brad.king@kitware.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This ensures that invoking the macro from a different module (operating
on a different target) is not possible.
Change-Id: Idbcd41d03172a8f1dcea26954464ab981fce8879
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Since we're only including the Extras file one time, invoking set() for
the include dirs again will overwrite the addition of include dirs in
the extras file.
We only need to populate these variables if not set anyway, so do that.
Change-Id: I04dad0674778e79c8c12c18231b8ce6c92edf881
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
this function is called only from library TEMPLATEs, and always with
exactly one word as the only argument.
Change-Id: I6282e3826791f89e6cf89dde625c8166e4e56028
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
these have no (useful) install target, so it makes no sense to reduce
the "build" to installing sources. suppressing the actual build can be
achieved with -nomake examples instead.
conversely, as the build dir is the install dir, people actually need to
be able to (selectively) build examples in there.
Task-number: QTBUG-29756
Change-Id: I98f34235442b552e51c0d5f5cec96a3eab4f1e7f
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
... instead of as a fallback in default_post.
it was this way in qt4, and it requires less code to be written in the
end. we are already doing it for debug/release as well.
Change-Id: I6e02849d61d14a18375cf64a5990768931ebac48
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
all tests that happen after default_post loads resolve_config can rely
on debug vs. release, static vs. shared, and staticlib vs. dll being
properly "de-conflicted".
Change-Id: Ie0b4defcd6024bd1c25f53ba7e03621052d96492
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the current approach of having "free-flying" prf files for such a core
issue is rather insane. this was noticed early on, as evidenced by the
forcible loading of debug/release/debug_and_release in default_post.
however, things remained a mess, in particular static vs. shared.
consequently, the commit merges all related feature files. the actual
config resolution is put in a separate feature file, so it can be loaded
by resolve_target if that happens to be loaded early on.
Change-Id: Ie30e7c63cabe9409a3263ca1650e323a870926f2
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
there is mightily little point in unsetting variables right before
unconditionally assigning to them.
Change-Id: I24c1814ce38bf9aab4496679b1a670f3cd55c536
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
If Qt is configured with -libdir /some/dir/outside/the/install/prefix/,
then for use absolute paths for the executables and include dirs too.
Change-Id: I5ccf62be6f93f97d934df62038fe4cd40dca9a93
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
all non-installed tools are properly registered, so they don't need the
fallback. conversely, we can assume that non-registered tools are
already installed.
this enables us to build docs in qtbase after an incremental
build+install up to qttools.
Change-Id: I95a55f6b84e01885bcf6dd656caf0dd2b679bb73
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
This is the <prefix>/include directory which is independent of the
module and which only has to be used once. As everything uses QtCore,
it is enough to set it only there.
The CI system is a special case, in that it tests things before
installation. Handle that case too.
Change-Id: Idcdf9617e199b7d490cb3553cce07f1f464b3bec
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
As the Extras file can do things like append to a property (as in
QtCore for include directories), that is something that should be
done only once when the QtCore target is first defined.
Change-Id: I5163912bccfda1ff43a02eb01f67ac59e6f6b24b
Reviewed-by: Alexander Neundorf <neundorf@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
the pkg-config file names follow the TARGET by default. as we create
frameworks without the major version infix, all references to Qt5* would
be invalid.
Task-number: QTBUG-29453
Change-Id: I82e7de017a8f17f7d2d7b4a2a61a180125ca29a0
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
it's not used for anything other than display, so we can put a space
there.
Change-Id: I77e156856efeaaa964ff3bf2369bcd5586bac7c6
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
there is no point in duplicating the information in every module.
host_bins is exported only here as well.
Change-Id: I2f816e1cade9761a2c0d97c7ca1c90293095bfb1
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
users need access to the Qt configuration, not some internals of
module's build system.
Change-Id: Ife3f668282969d444282d57152c11ed0f741076f
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
-rpath does *not* imply -rpath-link when x-building:
ld(1): "Searching -rpath in this way is only supported by native linkers
and cross linkers which have been configured with the --with-sysroot
option."
it doesn't hurt to have the "excess" -rpath-link for native builds, so
just remove the cleanup.
Change-Id: Ic39c1f4d6c2e3770d43a5ed3e56cf89a146edf85
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
if the libraries are in a non-standard location, but no rpath is used,
rpath-link is needed. this is often the case for non-prefix builds
(which have no forwarding pris any more).
as we cannot store absolute paths in the final pris, we need to store the
module names, and resolve them only at use time.
Change-Id: I1538b5d531611c76a2d7058a3b2ff683bdcbe427
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
as everything is built inside the common build/install dir, there is
no point in the fwd pri stuff.
as a "side effect", this makes it more straight-forward to relocate
non-prefix builds, which is the default on windows.
Task-number: QTBUG-28827
Change-Id: I010246a9ad87cf74974dc168768b1a8625f73260
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
move the regular pri file creation into the "sub-prf" and rename it
accordingly. the original reason for the split was the deep magic in
activeqt (and phonon), which is gone now.
Change-Id: If40e941afc9293725630ed6bcf3e4ef18a692f66
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
-developer-build enables an actual build of examples, based on the
assumption that developers want to test it (it can be still disabled
with -nomake examples). regular users otoh want only the examples
sources installed.
Change-Id: Ifc6a108099929175a3960480802b271a758fdd38
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
we need to collect the sources of the install targets for the check that
all files have been properly handled, but of course we must not add these
files to the source install target, as that would mean double installation.
Change-Id: I6acb56f2a993b6ed81d1031d5dc0a0da30a53b54
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Curiously, qmake could fix .prl and .pc files for unix, but only .pc
files for MinGW. qt_module.prf seems to have known this.
Task-number: QTBUG-28902
Change-Id: Ice9983a69813690c0d4b96ca11589440182569a0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Fully modular prefix build now puts the includes and libs into each
module's own builddir, so the else branch was simply bogus. Replaced
the else branch with the real base for modular builds. This allows
the paths to be successfully replaced when installing metafiles.
Change-Id: I056a923288965b560a4e9b0ba7add1aac912199f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
otherwise qmake will just take TARGET and lowercase and capitalize it,
which not only looks weird, but also does not match the Requires: fields
we generate.
Change-Id: I4a070ff256fffd2b780acb0361d4213d0032dbb9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Dihan Wickremasuriya <nayomal@gmail.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
This is a less error-prone way to calculate relative paths.
Task-number: QTBUG-29110
Change-Id: If4509ef278e48dcf08bdcc904d21534b4c05993f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
