The current implementation got stuck always asking for
the parent of the same child
This patch will make sure we actually walk up the
parent chain.
Pick-to: 6.2 6.2.0 6.1 5.15
Change-Id: I9f67f6305e0143526f53952a563d496e760ac2e7
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
QWidget and QApplication handle popup closing for most events at the
right time for the Qt-internal state logic. On other platforms popup
QWindows are never closed automatically when clicking outside.
So don't close any popups in the Cocoa plugin either, and let the Qt
logic take care of it. This ensures that window activation is done at
the right time, that Qt's modal popup stack is consistent, and that
mouse replay for events closing a popup works.
There are however two exceptions: mouse events in the window frame don't
produce a QMouseEvent for Qt; and mouse events in a modally blocked (by
Cocoa) window don't reach Qt at all. For those case, the logic in QWidget
and QApplication is not enough.
For the former, leave the change introduced in 70b94eea10
to explicitly close popups for LMB down in the frame. This still needs
to happen before the event is delivered.
For the latter case, deliver the event explicitly to Qt when we discover
that the target window is modally blocked while a popup is active. The
handleMouseEvent implementation then takes care of the redirect to the
active popup, and Qt will further respect the modal stack in the
QApplication::isWindowBlocked implementation.
Change-Id: I578eb5e6aebc897a0ff1f69bc5c53bcaa05d138d
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
QTipLabel has a global application event filter, looking for reasons
to close the tooltip. To fix QTBUG-55523 an additional condition was
added in 7c18cb4f83 to also close the
tooltip when intercepting QEvent::Close, but this was unnecessary,
as the fix in 29205c53e4 was sufficient.
Furthermore, hiding the tooltip on close events turned out to cause
issues when the closing widget/window was the tooltip itself, causing
recursion. This was fixed by 24239aef35.
(which unintentionally also changed behavior for WindowActivate,
WindowDeactivate, FocusIn, and FocusOut due to the case fallthrough).
As it turns out, there is another case that will close the tooltip
prematurely, and that's when the Qt::UI_AnimateTooltip effect is
enabled, which is the case on e.g. Windows. In that situation a
QRollEffect widget is created for the duration of the effect,
which is then closed after the effect finishes. When closing
the effect via QWidget close, we'll end up with a close event,
triggering QTipLabel to hide itself.
Since the logic of hiding the tooltip when other windows close
was never needed to fix the original issue in QTBUG-55523, we
opt to remove it completely, instead of adding even more
heuristics to the code.
Task-number: QTBUG-55523
Change-Id: I8d341262c85fd2e8cf9c496974e46ae0e9245e5c
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
...in the native interface.
Using OpenXR is impossible on some platforms (for example, Android)
without knowing all three. The EGLContext alone is not enough, and
EGL offers no way to query the EGLConfig a context was created with.
https://www.khronos.org/registry/OpenXR/specs/1.0/html/xrspec.html#XR_KHR_opengl_es_enable
Therefore, expose all three so libs/apps can use the new way to query
these native resource without resorting to the old-style
nativeResourceFor* queries.
Change-Id: I7efb0a26b858150da55e711752af99426e744322
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The indirect include is not available everywhere
Amends b8191f41c6
Pick-to: 6.2
Change-Id: If0abf3b0186594ff5381dab847cbdf13e4fcf448
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
On macOS, we only follow the native behavior to not replay mouse
presses outside of a popup because we close popups in the QPA
plugin before any popup-specific logic in QApplication kicks in,
so a press that closed a popup is never seen by Qt at all.
Before we can remove the popup closing code from the QPA plugin,
implement the existing platform style hint for Cocoa to prevent
mouse press replays.
Change-Id: I2328f706ba148ece2d0e3fb4e71fe9123ab5e205
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The Qt::WA_DontShowOnScreen widget attribute does not limit whether a
widget will be created (have a QWindow and corresponding QPlatformWindow).
It only limits whether the widget will be shown.
As a result, we need to respect and process incoming events on a QWindow
level, just as any other window. Any considerations that may apply because
of WA_DontShowOnScreen should happen further down in the event delivery.
For example for the issue in 74aae00a4e8e70845e8092abbefa7830c386e66b,
where QWidgetWindow::handleExposeEvent() cleared the WA_Mapped flag which
was set by QWidgetPrivate::show_sys().
Change-Id: I187ebe14ea84538a3715f1d09fb1ba1ce93fcc82
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The documentation links on `msdn.microsoft.com` and
`msdn2.microsoft.com` now redirect to `docs.microsoft.com`.
Some of the links in the documentation were to those domains.
In particular:
- An `\externalpage` link to the `Mitigating Cross-site Scripting With
HTTP-only Cookies` article.
- An `\externalpage` link to `Microsoft Actibe Accessibility Event
Constants`
- A link to the `RtlGetVersion` function in
`qoperatingsystemversion.cpp`
- A link to the `GetCommandLine` function in `qcoreapplication.cpp`
- A link to the `KNOWNFOLDERID` constant in `qfiledialog.cpp`
While the redirection works, our script to catch broken links on
dev-snapshots builds of the documentation doesn't handle redirection
correctly, reporting it as broken.
Both to appease the broken-links script and to avoid an unneccesary
redirection, the above links were modified to
point to the equivalent address in the new domain.
Task-number: QTBUG-96127
Pick-to: 6.2
Change-Id: I0e9a132f06af7fc43bca6c8ad2054feb6e3e27cd
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
The old `tools.ietf.org/html/*` web pages containing RFCs now redirect
to `datatracker.ietf.org/doc/html/*`.
While the redirection work, our script to catch broken links on
dev-snapshots builds of the documentation doesn't handle redirection
correctly, reporting it as broken.
Both to appease the broken-links script and to avoid an unneccesary
redirection the RFC link in `json.doc` was modified to point to the
new address.
Task-number: QTBUG-96127
Pick-to: 6.2
Change-Id: Ic0b0441fb298cfe2e282904e7e8d9155ab25091c
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
The JUnit format is easier to feed to tools that don't support
the native Qt Test XML format.
Pick-to: 6.2
Change-Id: Iad677b98953275fd70765acb039f1fb3d0f44dab
Reviewed-by: Simo Fält <simo.falt@qt.io>
a332f3fabc disabled resolving all fonts
on the system for every font lookup, which was a significant startup
time improvement. But it also caused a regression: When a font has
an alias which shares the name of a proper font, then this would
not be resolved correctly.
This is fairly typical on Windows/GDI due to backwards-compatibility.
Instead of being collected under a shared typographical family, fonts
are disambiguated by adding the style name to the family name. The
proper typographical name is still available, but this is not
enumerated by the system.
So "Segoe UI" for instance, will be available as "Segoe UI",
"Segoe UI Light", "Segoe UI Bold" etc.
When we populate family aliases, we register that "Segoe UI Light"
is actually "Segoe UI" with Light weight, and prior to
a332f3fabc this would be done implicitly.
But after the optimization, we would only populate family aliases once
we stumbled over a font request for a non-existent font. For "Segoe UI",
we would simply return the regular weight font as the best imperfect
match.
The fix is to populate font family aliases not only when the family is
non-existent, but when the match is imperfect, e.g. if we are asking
for a Light weight font and only finding a regular one. User code can
still avoid this somewhat expensive operation by using the full
family names on Windows.
This also requires a fix to a test. When removeApplicationFont() is
called, we invalidate the font database, so it will be reset to a state
that does not contain the family aliases. Therefore we cannot guarantee
that it is identical to what it was before the test started, since this
depends on what has happened previously in the application.
[ChangeLog][QtGui][Text] Fixed an issue where some font styles and weights
would not be selectable. This was especially noticeable on Windows.
Pick-to: 5.15 6.1 6.2
Fixes: QTBUG-94835
Change-Id: I892855edd1c8e3d3734aace396f6000d897d2ec4
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The following snippet in a .pro file resulted in a build error:
CONFIG += lrelease embed_translations
TRANSLATIONS += foo.bar_de.ts
The variable QM_FILES was incorrectly calculated. The extra compiler
that calls lrelease uses QMAKE_FILE_IN_BASE, which wraps
QFileInfo::completeBaseName(), resulting in "foo.bar_de.qm".
The $$replace call that calculates the .qm file name however, produces
"foo.qm".
Fix this mismatch by adjusting the regular expression to behave like
QFileInfo::completeBaseName().
Pick-to: 5.15 6.2
Fixes: QTBUG-79016
Change-Id: I545d1b58170cd5229007faf31c9b2c6f70ff75a6
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
QWINDOWSIZE_MAX is needed to implement platform plugins and Wayland
shell integrations. Moving the #define from qwindow_p.h to
qplatformwindow.h makes it available from a supported header file.
This should not break anything, since qwindow_p.h includes
qplatformwindow.h
Change-Id: Ie003b1e9d6494695057d59aba5a17ad7fd51c654
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The custom linked list implementation was implemented using
recursion, and as a result didn't handle long lists of test
cases, exhausting the stack on e.g. Windows where the default
stack is only 1MB. This was the case with e.g. the tst_QChar
test that produces 20K test cases.
Replacing with a std::vector should do nicely for our use-case.
No attempt has been made at further reducing the complexity
of QTestElement/QTestCoreElement/QTestElementAttribute.
Pick-to: 6.2
Change-Id: Ie295f7cf937ec6abdc4606b6120818551ad285c7
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Because otherwise we may end up with trailing backslashes
Pick-to: 6.2 6.2.0 6.1
Change-Id: I7ad24ec34c35f0a7b32241751bbcd2b26a8a23ea
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Add some trivial inline methods to the classes that populate the
tables to simplify access to their data. Use ranged-for loops to
iterate those tables (now that they no longer have bogus all-zero
entries at the end).
In the process, noticed windowsIdToDefaultIanaId() doing a double
iteration of the windowsDataTable, first via toWindowsIdKey() to map a
windowsId to a key, then again to map that key to the matching ianaId;
inline the former and use the table row from which it got the key to
extract its ianaId instead.
Change-Id: I76267f53c7e6f5c593e33b6146b8f98bfb6d042f
Reviewed-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
They are not needed. Iterations over the table track their sizes.
The size-of-table constants just needed their -1s removed.
Incidentally use std::size() rather than sizeof(array)/sizeof(element).
Change-Id: Ie20eef9f6f5786d93c10b830a87e006d3c5bcc1a
Reviewed-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The make the semantics overt and avoid the joys of yet another
approximation to pi/180 hard-coded in our source-code.
Change-Id: I9dcbaada2e7de119e385fc7056bc601ecd59311a
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The h2 server is running in a separate thread, so while the previous
test was finished and the server was deleted, it could still emit
and have a queued emission in-flight which would be picked up by
the next running test.
Pick-to: 6.2 6.1 5.15
Change-Id: I26b1bc711df7473032d6078f35f8aca37c40137e
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The comment for keepAlive means that it should be destroyed after the
updateGuard goes out of scope and restores its value. In this case
keepAlive should be actually created *before* updateGuard, not after it.
Pick-to: 6.2 6.2.0
Task-number: QTBUG-96303
Change-Id: I4f8e67b49c1d6579228e22111105fb936f1f94db
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
If we create OBJECTS_DIR at qmake time, Xcode will not consider this
directory as created by the build system, and "xcodebuild --clean" will
fail.
Prevent qmake from creating that directory in the Xcode generator.
Pick-to: 5.15 6.2
Fixes: QTBUG-96305
Change-Id: I874bf34a4289ce5f2d3e2ce070ffbe56d5368861
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The embedded window is parented into the containing QWindowContainer
widget, which may either have a window handle itself, or is a child
of a widget that has one (typically the top level).
By setting Qt::SubWindow we inform clients about the embedded window's
place in the world, allowing e.g. QPlatformIntegration::defaultWindowState
to choose the correct state (Qt::WindowNoState) for the window instead of
making it Qt::WindowMaximized on iOS.
Pick-to: 6.2 6.2.0
Change-Id: Icf834192d99fee455aaba3c57bee1a4f1fde5025
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
On platforms such as iOS, the default window state is Qt::WindowMaximized,
so that calling show() will fill the entire screen. But sub-windows should
not get this treatment, as their geometry is typically managed manually.
Pick-to: 6.2 6.2.0
Change-Id: Ib17c2011a16baf6023fe368b94fa7f38e12bd777
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The link was to `msdn.microsoft.com` which now redirects to
`docs.microsoft.com`.
While the redirection works, our script to catch broken links on
dev-snapshots builds of the documentation doesn't handle redirection
correctly, reporting it as broken.
Both to appease the broken-links script and to avoid an unneccesary
redirection, the Winsock link in `qlocalsocket.cpp` was modified to
point to the new address.
Task-number: QTBUG-96127
Pick-to: 6.2
Change-Id: Idff5c2e96f7c90259219a554f73e16c37b81cafe
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
QDesktopServices::openUrl(const QUrl &url) is already implemented
on Android. But even if it is possible to set an URL handler, the
mechanism to invoke it is missing. With this commit the URL handler
will work on Android like it is already working on iOS.
Task-number: QTBUG-84382
Pick-to: 6.2
Change-Id: Ic560bd380f1cc59586861aa1a6a3ea064276a39e
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Commit ed483346 changed the main code path to deliver
activation events synchronously, however it looks like
an additional code path was missed.
Use SynchronousDelivery also in becomeFirstResponder.
Pick-to: 6.2
Change-Id: I9061868b0dd0db0252f281e3a974cffe795af38f
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Since qt6_android_generate_deployment_settings uses 'file(GENERATE'
API now, we can use generator expressions when writing target
properties to deployment setting files.
This adds the generic functions to accumulate list and non-list
target properties and write them to a deployment setting file
with respecitve key.
Change-Id: Ibfdc875c84c39166f26b2f12ab59831d4f9a6e00
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
If the project consists of an executable and multiple libraries that
are linked to the executable, currently you need to specify them
manually using QT_ANDROID_EXTRA_LIBS target property.
This automates deploying of the libraries that are a part of the
project build tree. _qt_internal_collect_target_apk_dependencies
collects all the known non-imported shared libraries from the project
build tree. When running androiddeployqt we specify extra library
directories that point to the collected library locations in build
tree, to help androiddeployqt resolve shared libraries that are build
as a part of the project.
The described procedure is running automatically if CMake version is
greater than or equal to 3.18 is. For the CMake versions less than
3.18 users need to call a new public qt_finalize_project function at
the end of project's top-level CMakeLists.txt
Task-number: QTBUG-94714
Change-Id: I400ca4e49e940cfc25ae90d65372e79825bee55a
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The test was failing because it didn't account for the platform behavior.
Task-number: QTBUG-30040
Pick-to: 6.2
Change-Id: I7c523c06f0bfa459c1532cee721718bebc1858c4
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
The test is randomly failing in the CI on QEMU. Couldn't reproduce it on
the actual armv7 hardware, so most likely it's not a Qt bug.
Fixes: QTBUG-96103
Pick-to: 6.1 6.2
Change-Id: I60b7264c6ce44b3b327fdd0dbcede006717c65a6
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Minor clean-up.
Split two long lines and added braces, called for by Qt coding style.
Turned some QDebug("this line should never be reached...") into QFAIL();
that should make the effor a bit more prominent if it ever happens.
Likewise for a qDebug() << "ERROR: ..." for code not meant to run.
Change-Id: I1d34fe202f269eb3ad8f58feaabed809e4fec99c
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@qt.io>
If automatic signing is enabled (which it is by default), then Xcode will
happily set up the required profile if you open and run the application
in Xcode. To get the same behavior for xcodebuild, and hence from Creator,
since it's calling our Makefile wrapper around xcodebuild, we need to
pass the -allowProvisioningUpdates flag to xcodebuild.
Fixes: QTBUG-95565
Pick-to: 6.2 6.2.0 5.15
Change-Id: I9325bb228bdfb4d07658eff8f41798f7b5a6955c
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
To avoid comparison between signed and unsigned integers,
and the compiler warnings that come with it.
Change-Id: I1028a980dfde68acc338f0e480fdeec42ed81ffb
Reviewed-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This reverts commit 39f0633f0b.
The Deepin desktop environment is developed based on Qt, but some
applications use dialog boxes of GTK, and some applications use dialog
boxes of Qt. This doesn't look good. The initial commit was trying
to unify this by always using GTK dialogs.
But this turned out to not look good, so instead the plan is that
all application dialogs can be based on Qt. Reverting the original
commit as a result, as it is no longer applicable.
Pick-to: 6.2
Change-Id: I2824b7b2f292f3896c9f94ccce6979f77d66578b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Don't maintain two copies of the docs for qt_import_plugins() in
separate places. Remove the inline docs because they are not the
canonical ones that the user docs contain.
Also remove the TODO and qml plugins. Those are now handled by a
separate command, qt_import_qml_plugins(). Add a "see also" link to
assist in discoverability.
Task-number: QTBUG-95712
Pick-to: 6.2 6.2.0
Change-Id: I3bb872f77a1b57fd5f2f4fe1355625c47e44a351
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The docs for CMake commands all show the versionless commands as the
primary name, with versioned commands added as a note. Use the same
preference for targets for consistency and update the Qt5:: namespaces
to Qt:: rather than Qt6::.
Task-number: QTBUG-95712
Pick-to: 6.2 6.2.0
Change-Id: I6bf1929a11656f88e27bb5877e9521a3a651361e
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This is in preparation for splitting up the cmake-macros.qdoc file into
one file per command.
Task-number: QTBUG-95712
Pick-to: 6.2 6.2.0
Change-Id: I9e56b88139cc6a53cd03cbed3d14404577f89faa
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The system behavior is to not show these kinds of dialogs as modal,
and we've documented that for QMessageBox.
However, calling show() instead of exec() is not enough, as the
default constructor of QMessageBox will set the modality of the
widget to application-modal. We need to explicitly override this.
[ChangLog][macOS] QMessageBox::about(Qt) now shows dialog non-modal,
as documented.
Pick-to: 6.2
Change-Id: I6bb59efb81feb23122276a9eede71b2f20c9d7c6
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Use the _qt_internal_collect_qml_root_paths function to collect qml
files from the resources. The function is called only if Qml module is
found.
Pick-to: 6.2
Task-number: QTBUG-93340
Change-Id: I2b5f51e3d7fb8aa82f46e88b2aac5e52bf0930d5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Qt wayland platform plugin has improved quite a lot and it is now pretty
much usable on Gnome. It also improves user experience a lot on HiDPI
displays.
Pick-to: 6.2
Change-Id: I943e0bb969f384bdc3c603e290ce9c8358b70f63
Reviewed-by: Aleix Pol Gonzalez <aleixpol@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
