When an executable is being linked and uses a library that has been
built with exceptions enabled, the executable will need the exceptions
flag in order to link in the exceptions handling code.
Change-Id: I3acdb571afbbcaf860fb0ef0482f704f605a9bbe
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
[ChangeLog][QtBase][General] Removed support for WinRT/Windows Phone 8.1.
Task-number: QTBUG-57288
Change-Id: Ifd6d6780cbbdb710d99556ba3d2fb2e514d4f789
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Make it depend on the corresponding Private target of each
dependency. This way, user code can write
find_package(Qt5Gui REQUIRED)
add_executable(hello hello.cpp)
target_link_libraries(hello Qt5::GuiPrivate)
and get the private include directories for both Qt5Core and Qt5Gui.
Don't create the Private target if any of the private include
directories do not exist. This way, if user code uses one of the
targets, CMake will issue an error if the private include directories do
not exist. Unfortunately the error is somewhat cryptic (eg, 'the
"Qt5::CorePrivate" was not found'), but this is still an improvement
over an error at compile time.
This is an improvement on the situation described in QTBUG-37417 using
Modern CMake features.
Change-Id: I034f8216c3ec64d1a3309682456a713cac9bf854
Reviewed-by: Kai Pastor <dg0yt@darc.de>
Reviewed-by: Stephen Kelly <steveire@gmail.com>
we pull this feat off by booting configure with a dummy spec. the proper
spec gets loaded subsequently.
note that it was necessary to move the cache loading after processing
the early checks (from which the spec handling is triggered). this is
just fine, as the cache is needed only by tests, which are forbidden at
this stage by definition.
Change-Id: I5120e25a8bf05fb8cc5485fd93cf6387301089aa
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
this moves us another step towards the "outer" configure doing just
minimal bootstrapping of qmake.
a challenge here was that so far, qmake itself needed qconfig.cpp. this
was replaced by usage of a qt.conf file instead of compiled-in values.
however, to make the executable still self-contained, that qt.conf is
embedded into it (by simple appending of a fixed signature and the text
file).
the qmake with the embedded qt.conf is not used for the qt build itself,
which instead relies on the qt.conf in bin/ as before. however, due to
the missing built-in values, this file now needs to contain more
information than before. but except for a minimal version that is needed
to start up qmake/configure at all, that file is now also generated with
qmake. as some of the newly set up properties are subsequently used by
configure itself, qmake gains a (deliberately undocumented) function to
reload the qt.conf after it's fully populated.
unlike the old implementations, this one doesn't emit redundant qt.conf
entries which match the hard-coded fallbacks. omitting them leads to
leaner files which are more comprehensible.
Started-by: Paolo Angelelli <paolo.angelelli@qt.io>
Change-Id: I4526ef64b3c89d9851e10f83965fe479ed7f39f6
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
in its current form, it was introduced only in 5.7, mostly as a side
effect of -external-hostbindir (which is now handled differently).
it only ever worked for the macOS and MinGW specs, as a side effect of
them supporting -sdk and -device-option (for good reasons), and was
supported only by the unix configure. it's not believed to be really
useful and complicates matters somewhat, so get rid of it again.
should it ever become actually relevant, it can be re-introduced
properly, probably along with a -host-sdk option for macOS.
Change-Id: Ib078469ea39deb821c7b6a8c67fda9e1a95fedf5
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
instead of letting the specs validate themselves on each call, let them
only define a callback for use by the verifyspec configure test. this
is somewhat faster, and allows them to be loaded before qdevice.pri is
populated.
Change-Id: I2b60d006b33bbf42c28949f10ad429520ed32f46
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
its only consumer is qt_tool.prf, which is an internal api.
Change-Id: Iae90b079c5af60efad2ded70d6ea481212e5353a
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
... where it actually belongs, as it should work in each repo in a
modular build.
Change-Id: I5463f0bcacb239900bed0b0f7be9cf32a3eab04e
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
the qmake bootstrap uses some of the options, so the configures still
read config.opt for their own purposes, but the general handling is
entirely in the new system now.
Change-Id: I2c6c657d4da01c8d520ac74795454747bb224bdd
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
this also removes the need for passing pre-processed options via
configure.cfg, so get rid of that.
a somewhat unfortunate side effect is that the android-style-assets
feature had to move back to the top level, as the licensing options
depend on it.
Started-by: Lars Knoll <lars.knoll@qt.io>
Change-Id: Id4d1e0ba18b3e3104400293b8f0c7f2f65e68dea
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This re-fixes commit d72ac3f35f, which
simply removed the #define but did so at the wrong place. Instead of
forcing the macro to be removed, let's simply not have it defined in the
first place.
Change-Id: Ie6dbad9bbbd9488887e8fffd148dd67d9a31b32e
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Fixes: warning: implicit conversion from 'float' to 'double' to match
other operand of binary expression [-Wdouble-promotion]
Task-number: QTBUG-57068
Change-Id: I897a341aca83873bc6abd256a82a3b9f09409833
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In VS builds the default name is the first word of the command, in this
case "cl". Use the generated file name instead.
Change-Id: I8f0039eeae045f8b9a13caea8bd3e338bbe2ed17
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
excise knowledge of QTREPOS from qt.prf - this is a private variable of
the qt build system which the public functions should not know anything
about.
instead, move this handling to a function in qt_build_config.prf (where
QTREPOS comes from in the first place), and call it from qt_app.prf and
qt_example_installs.prf (which should be the only consumers within qt).
qt.prf now also checks that the qml install dir actually exists, which
is not the case during a modular prefix build of qtdeclarative.
not really incidentally, this fixes modular static builds of
qtdeclarative.
Task-number: QTBUG-57308
Change-Id: I31465b9cd400483264fc236934c6f9f26a5fdd73
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
we can't use $(QMAKE) after all, as this breaks with the visual studio
generator. so massage $$QMAKE_QMAKE into the final form manually
instead.
supersedes 591d9588f in amending 2b6bcd5ff.
Change-Id: I8c7a6c43f9668d88c1cc968dbf5614240f16239a
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
the variable is converted to a format suitable for makefiles only after
the project was read. to access it, one needs to use the exported
makefile variable $(QMAKE).
amends 2b6bcd5ff.
Change-Id: I5eddff4bebbbcf461b565d5033d17a8daff1e6f4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This commit re-enables support for OpenVG in Qt, but not in the
same way as in Qt 4.8. The first part is about adding a test
and using the new configure system to enable OpenVG.
There is still support code in Qt for setting up EGL to provide a
surface and context for rendering with the OpenVG API, this commit
enables a path to do so.
Normally to get access to an EGLContext from a QWindow you do so via
QOpenGLContext, but in setups without OpenGL but with EGL and OpenVG
this doesn't make sense (there would be no QOpenGLContext). So the
intended way is to use a QWindow to get an EGLSurface, then create
an EGLContext directly (without going through QPA).
Change-Id: I0f75aadbaa3cd006deb7e6fd12cfbb574870fba4
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
this is complementary to configure's makeSpec library source type.
this should be sufficient to make QMAKE_USE += {egl,opengl,opengl_es2}
actually work, obsoleting the need for opengl.prf and egl.prf (and the
currently dysfunct openvg.prf).
Change-Id: I2f7595ac89afa087ea7f0f25060e8e47e6148be9
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
now the callbacks don't need to re-export the designated file contents,
which improves the abstraction and removes some boilerplate.
Change-Id: Ifa50313155fc96762025e2610b810ebb71daa373
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
otherwise it's sometimes quite hard to tell it apart from configure's
own messages.
Change-Id: I2f4908344367a9a3ce38e032bf76486fc4552ffd
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
this got broken in 2ad4d75754.
however, the new configure system operates from the top-level build dir
anyway, so there is no point in messing with the cache as a reference
point to start with - just use OUT_PWD.
Task-number: QTBUG-57120
Change-Id: I69629bf497931574bff8452939170abb1776ab60
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
'use' entries in the tests and libraries sections of configure.json
files should work acrosss library boundaries, so a test in
qtwayland can refer to a library from qtbase.
Change-Id: Ide02b9985be427a27982a422ca84a29b23145bcf
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
You can now use 'module.gui' to check whether the Qt Gui module
exists in the current build of Qt.
Task-number: QTBUG-56656
Change-Id: Ic73f162ed0578e07c70e3ec3706f285b6d09a41d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
On Windows cd does not change the drive. So when you are on drive C:
and type "cd D:\data" it will change the directory on drive D: but not
affect your current working directory.
To also change your drive you have to provide the parameter /d on
Windows, so "cd /d D:\data" will also change the drive.
Task-number: QTBUG-57080
Change-Id: Ib629879534523982eec693cef725f20a535a1a74
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This strips leading whitespace from asset catalog filenames, which was
causing installation to fail due to incorrectly calculated paths.
Task-number: QTBUG-57090
Change-Id: I80db627262f9d58f4403e2d8ab205bef2113992b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
this actually affects only non-framework Darwin builds - debug-only
framework builds are impossible, and Windows is always debug-and-release.
Change-Id: Ia79dbbefc5750168ebd8967fe4afbe173f55a0d6
Reviewed-by: Erik Verbruggen <erik.verbruggen@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
they were already omitted from the console output; there is no need to
spam the log with them (their completion was not logged, either).
Change-Id: I32c97413d2e6ceb18ee61356855cc6a7fa2222bf
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
they have none.
Change-Id: I1e5ffa9960c4fac3c708be4820fb40e7909569c8
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
it is counterproductive to clear the log when cached test results are
used, as that makes it hard to determine how they came to be.
-recheck isn't as clear-cut as -recheck-all, as only part of the results
is discarded, and we can't reasonably discard only part of the log. i
opted for clearing the log entirely, as having both the old and new
results in the log would be probably quite confusing.
Change-Id: Ibb391f2ba2ea86d73c23365d46cc66ed8a2158d6
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
