Instead of simply doing a match against a string S at offset O > 0
(and checking the result), test that the results never change when matching
against the substring starting at (O - i) at offset i, 0 <= i <= O.
Change-Id: Ib7fd648ca0a36b93d145267ebfb792c46ca4e4f5
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
[ChangeLog][QtCore][QRegularExpression] Support for matching
using QStringRef as the subject's string type has been added.
Change-Id: Idb956bbbdf4213f9ebe035db32cd37cf3370c6bc
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Unify the code paths which test the normal match, the partial
match and the global matches. Not only does this remove the duplication,
but it will also enable the corresponding tests to be run over QStringRefs.
Change-Id: Ia2cbe7a540bbe864b0975c9353697bc06c99c397
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
As a side effects it also adds core templates types to the tests
Change-Id: I0e3338e0bffdf21982aa83d404c83288e54411f4
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
This patch adds indexOf and lastIndexOf with QRegularExpressionMatch
output overloads to QString. This allows to get the match corresponding
to the index returned.
[ChangeLog][QtCore][QString] Added support for retrieving the
QRegularExpressionMatch to indexOf and lastIndexOf.
Change-Id: Ia0ae2d3ff78864c7053ffa397874aca1d2b1c35c
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Testing using an empty string doesn't ensure that the regexp
gets validated. The function may return earlier thus making
the test useless. This patch adds a text to search in so that
no early optimization avoids the regexp validation part
Change-Id: If24b77385dde44a922d43e5ae1d7a5393d24f640
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The iterators for QJsonArray and QJsonObject are currently lacking an
operator-> definition. Unfortunately it is not possible to do in clean
way without redefining either the iterators or QJsonValueRef class.
This patch instead adds two fake pointer classes that are only used
to handle the operator-> return value.
Task-number: QTBUG-29573
Change-Id: Ief785a6afbbedc9e89cf3b6f3958c2c755997a66
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
kUCCollateDigitsAsNumberMask works only if kUCCollateDigitsOverrideMask
is also set.
Update 0: - test added.
Task-number: QTBUG-40777
Change-Id: I48bfec78f5f8439a51f8d749f0fc4397a72b29f2
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
WinRT is a sanboxed environment, hence files can only be created in
some writable location.
For some tests we reset the current directory to minimize the required
changes. We cannot do this for the application lifetime as the test
also has cases where it reads files relative to the executable inside
the sandbox.
Change-Id: Ib9d37c8cffd191f0d1055f835c11d10887923378
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
As a side effect, QString::simplified() will always return a detached
copy, even if it's the same contents.
QStringRef::trimmed() can use the same calculation algorithm but can't
use the trimmed_helper() template function due to its lack of a
constructor taking begin pointer and size (std::string_view could do
it). That constructor can't be added because QStringRef always refers to
an existing QString, not to data in memory.
Change-Id: Ib966c1741819c68c6bac5fcbb00f8ac818b3ccab
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
This is even more common than the QByteArray equivalents.
Qt Qt Creator
const & && const & &&
toLower 71 50 45 26
toUpper 35 8 46 35
Change-Id: I8b797d2321b22ce414c23656c5f1709ac649c423
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Those operations aren't very common with QByteArray but this is easy to
optimize.
Qt Qt Creator
const & && const & &&
toLower 34 10 0 1
toUpper 3 1 0 0
Change-Id: I2097955f4c889ea5a21903c35ddbc0ff27bf62c5
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Do a check first if we need to transform before doing the transform.
This means we won't detach when transforming data that is already
correct.
And instead of using QChar, use our own hand-rolled table. In a proper
LTO build, the QChar calls would be resolved to a lookup of the Unicode
data, but not many people do LTO builds, Therefore, this means a great
speed-up is achieved by simply avoiding the function call. The extra
gain in performance comes from the simpler translation table instead of
the more complex full-Unicode data.
Also as a consequence, this changes the handling of two characters in
Latin 1: 'ß' should be uppercased to "SS" but we won't do it, and 'ÿ'
can't be uppercased in Latin 1 ('Ÿ' is outside the range).
Benchmarking is included. Comparing the Qt 5.4 algorithm to the new code
is almost 20x faster. Other alternatives are included in the benchmark
and are all faster than the current code, though slower than the new
one. While all of them could compress the tables to be smaller or shared
between uppercasing and lowercasing, they would also expand to more code
(though probably less than the extra bytes required in the full
translation table). In the trade-off, I decided to go with simplicity
and most efficient code.
Change-Id: I002d98318d236de0d27ffbea39d662cbed359985
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
If we write to a file, its size changes. We should drop previous size
caches.
Change-Id: Ib687c91e5fc88cab588c89023f23da9622160da9
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Allows to retrieve information about mounted volumes such as label,
total/available size, filesystem type and so on.
Possible use cases are:
- allows to do checks about filesystem before performing actual
operation (such as available/maximum volume size)
- allows to retrive information about volume that can be shown in file
dialogs
- allows to retrieve volume for specific path and check if two or more
paths belong to the same volume or not
[ChangeLog][QtCore] Added QStorageInfo class to retrive information
about mounted volumes and drives
Change-Id: Ibf9c2e6b53ef39c5605894a4422acdbbca4030c4
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
WinRT stores settings inside the app bundle, not in the registry.
Some tests are not fully functional due to errors in the file
implementation (See QTBUG-40588).
QSettings::SystemScope translates to a roaming container on WinRT,
meaning that settings stored inside there should be uploaded and
shared among devices. However, this is untested so far.
The tests have been updated for those platforms which do not store
the order of keys. This has been done on some locations only so
far, but needed to be done on more places for WinRT.
Task-number: QTBUG-33498
Change-Id: Ifd0194387b09c220d31812b4b6fd0ce9a7d84d24
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
Manually included changes from
3a347a4e70
in src/opengl/qgl.cpp.
Conflicts:
src/opengl/qgl_qpa.cpp
src/plugins/platforms/android/androidjnimain.cpp
Change-Id: Ic26b58ee587d4884c9d0fba45c5a94b5a45ee929
Fix disconnection from pointer to member signal that belongs to the base
class, but whose type is a pointer to a member of the derived class.
Commit 9cc106d9d7 fixed connect, so apply
the same fix in disconnect
[ChangeLog][QtCore][QObject] Fixed disconnecting from pointer to member
signal that belongs in the base class but whose type is explicitly given
as a pointer to a member in the derived class
Task-number: QTBUG-40638
Change-Id: Ia546fc8f36e1ea0dd0645bdd820aea47f43677ac
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This commit adds tests for ref-qualified member functions, the new
syntax for functions and decltype.
__PRETTY_FUNCTION__ for lambdas varies wildly between compilers and will
produce really bizarre results after cleanup. It's not tested and is
known to be broken.
Change-Id: I70c8dbcba54790357cecba35aa45c5cc672f29d1
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
On templates, adding constexpr makes a given instantiation constexpr
if it can be.
This turns qMakePair(0,0), say, into a compile-time constant.
The effects on existing code are small, but exist:
$ size lib/*{-baseline,-paircexp} | sort -nr
6516727 211192 2608 6730527 66b31f lib/libQt5Widgets.so.5.4.0-baseline
6516711 211192 2608 6730511 66b30f lib/libQt5Widgets.so.5.4.0-paircexp
5373720 44492 15976 5434188 52eb4c lib/libQt5Core.so.5.4.0-baseline
5373504 44492 15976 5433972 52ea74 lib/libQt5Core.so.5.4.0-paircexp
5107206 125072 6080 5238358 4fee56 lib/libQt5Gui.so.5.4.0-baseline
5107030 125072 6080 5238182 4feda6 lib/libQt5Gui.so.5.4.0-paircexp
1341290 30180 2600 1374070 14f776 lib/libQt5Network.so.5.4.0-baseline
1341210 30180 2600 1373990 14f726 lib/libQt5Network.so.5.4.0-paircexp
# no other libraries benefit
[ChangeLog][QtCore][QPair] Can now be used in C++11 constexpr contexts.
Change-Id: I3872e6aa33a7d02a168516f4dfa7119efcac8c40
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
and make QByteArrayList be a simple typedef.
As a side-effect, the constructor taking a QByteArray is no longer
available since I couldn't find a way to add it to QList<T> when T is
QByteArray. My template-foo failed me. I tried:
- QEnableIf<is_same<T, QByteArray>::value, QByteArray>::type
=> makes QList fail to compile for any T that isn't QByteArray
- make the constructor a template member
=> it compiles if the parameter is a QByteArray, but not a const
char[4] like the test was
- inheriting constructors
=> runs into ICC and Clang bugs that I could not work around
Besides, the constructor with std::initializer_list is a superior
solution anyway.
Change-Id: Ic86fbadc1104142bfd907a5c4147199bf839fb89
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Initial submission of a new class QByteArrayList with the
purpose of aggregating and then joining QByteArray instances.
[ChangeLog][QtCore] Added new QByteArrayList class.
Done-with: Marc Mutz <marc.mutz@kdab.com>
Change-Id: I503af58f125d7f44fef10360177490c933e5840f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The class provides compare operators, stream operators, and hashing
functions. This class aims to be compatible with (but not restricted to)
the Semantic Versioning 2.0 standard (semver.org).
[ChangeLog][QtCore] Added QVersionNumber class
Done-with: Marc Mutz <marc.mutz@kdab.com>
Change-Id: I244c8ccc002909af03987a2df052734d1a8621a9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The goal of this commit to make the code in the test work:
QCommandLineParser parser;
parser.addOptions({
{ "a", "The A option." },
{ { "v", "verbose" }, "The verbose option." },
{ { "i", "infile" }, "The input file.", "value" },
});
For this, QCommandLineParser needs a version of addOption that can
take a list of options. That's what addOptions() is for.
More importantly, the QCommandLineOption ctors mustn't be explicit.
OTOH, any implicit conversion from QString or QStringList to
QCommandLineOption is also undesirable.
To solve this dilemma, add new QCommandLineOption ctors that just
take one argument and are explicit, and make the existing ctors
implicit. In order to avoid ambiguities, remove the default values
of their resp. 2nd arguments. The new ctors are by intention not
\since 5.4, as they are completely transparent to the user.
Et voila, even better than getopt_long(3).
[ChangeLog][QtCore][QCommandLineParser] Added addOptions() method.
Change-Id: I5e779f3406cd0f6c8ec6ecbf6c8074af226de300
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This commit reverts c4cef6fae9.
The above fix for QTBUG-25958 (cloned in QTBUG-40219) is not
complete and introduces the regression QTBUG-30049.
Task-number: QTBUG-30049, QTBUG-25958, QTBUG-40219
Change-Id: I3c4b774dce06c13cb4e089f8413a7747cedfd212
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Background:
It is often necessary/advisable to schedule tasks on thread pools !=
globalInstance(). As Herb Sutter writes in
http://www.drdobbs.com/parallel/use-thread-pools-correctly-keep-tasks-sh/216500409
and the Qt Training Material stresses, tasks you schedule on a (global)
thread pool should be non-blocking, which currently rules out using any of
the QtConcurrent functions for, say, file I/O.
Nonetheless it's often convenient to have thread pools also for file I/O, as
the thumbnail viewer exercise in the Qt Training Material shows. In this
case, you'd use a dedicated thead pool, leaving the global thread pool for
CPU-bound tasks.
Yet, none of the QtConcurrent functions allow to pick the QThreadPool
instance on which to schedule the work created with them.
This patch prepares for them to do so.
This is the first part of the forward-port of
https://qt.gitorious.org/qt/qt/merge_requests/1281.
Implement by using a new QThreadPool* member that defaults to nullptr,
and adding setThreadPool to set this member, then using it in lieu of
QThreadPool::globalInstance() everywhere.
I chose to leave m_pool == nullptr to mean globalInstance() to avoid
creating the global instance whenever a QFuture is created, even if the
future represents the result of a calculation not run on the global thread
pool.
[ChangeLog][QtCore][QFuture] Can now be used with any QThreadPool, not
just globalInstance().
Task-number: QTBUG-17220
Change-Id: I4e1dc18d55cf60141b2fa3d14e2d44a3e9e74858
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Add a test that checks that QHash keeps the first of the keys
that compare equal. This may or may not be documented, but is
inconsistent with the values in a QHash, where the last element
with equal key is kept.
Document this as a test. That way, we'll be informed when the
behavior changes (e.g. by a port to std::unordered_map).
Do the equivalent checks in tst_QMap, too. There, of course,
instead of equal keys, check equivalent ones.
Change-Id: I2c5f04f8e8a6bbc7dbaadadd878a4c876e4df042
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Add a test that checks that QSet keeps the first of the elements
that have equal value. This is documented, but inconsistent with
values in a QHash, which keeps the last element with equal key.
Document this as a test. That way, we'll be informed when the
behavior changes (e.g. by a port to std::unordered_set).
Change-Id: I4ca1718bb86599b925b3ccd13b0856917cd4ce67
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This is in preparation of rewriting the function for efficiency.
Change-Id: Id5c16b984b95d76e1f26d862e3813f75980f44fb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The functions can be used to optimize code that do not need to use
the split results as QString directly.
[ChangeLog][QtCore] QString can now split a string to a list of
QStringRef.
Change-Id: Ic2dc929e1fba82f9a060e37c51068a301cb5b866
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
[ChangeLog][QtCore][QByteArray] Fixed a bug that would cause QByteArray
to stop converting toUpper or toLower at the first embedded null
character.
Change-Id: Ia369037206617813d86a8f1489589243c82aa51b
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Use the built-in hex, showbase manipulator to format the number in
hex. Also, apply nospace() only once.
Change-Id: Id4b3d5f082ad13f52c8711408d7ec609bec3a621
Reviewed-by: Alex Blasche <alexander.blasche@digia.com>
Export the former qMessageFormatString() as qFormatLogMessage(). This
allows custom message handlers to format their messages just like the
default message handler, taking qSetMessagePattern() /
QT_MESSAGE_PATTERN into account.
The method should arguably not add the '\n' at the end, which a follow
up commit will fix.
Change-Id: Ib2a9cfda91473df079daf03bf3197e6ac63e013e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Alex Blasche <alexander.blasche@digia.com>
It allows to create a QJsonObject instance in C++ by using
initializer list of pairs QString QJsonValue, for example:
QJsonObject o = {{"property1", 1}, {"property2", 2}};
[ChangeLog][QtCore][QtJson] QJsonObject now supports
C++11 initializer lists.
Task-number: QTBUG-26606
Change-Id: I67af881e175f427e563e685336c48a5f8466b476
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
On supported platform, allow to show a backtrace by using
%{backtrace} or %{backtrace depth=N separator="|"}
[ChangeLog][QtCore][Logging] QT_MESSAGE_PATTERN can include a
backtrace using %{backtrace}
Change-Id: Ib00418c070d3bd6fe846dc04bf69fa91ba64f9cd
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
If the test fails here, output the values actually used in comparison.
Change-Id: Ie4ed5ebdf1951c02b89a9648aee50a99d0bb0628
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is much more useful than the URL "file:", it allows to use
"empty path" and "empty URL" for the same meaning (e.g. not set).
QFileDialog actually uses "file:" though, as the URL for the
"My Computer" item in the sidebar. This patch preserves that.
[ChangeLog][QtCore][QUrl] QUrl::fromLocalFile now returns an empty URL
if the input string is empty.
Change-Id: Ib5ce1a3cdf5f229368e5bcd83c62c1d1ac9f8a17
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QJsonValue, while comparing two QJsonArrays, should consult also length
of the arrays, because a different than null base pointer doesn't mean
that an array is not empty.
Change-Id: If76739355a4e74b842e836289565f98d95c006d5
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
QJsonValue, while comparing two QJsonObjects, should consult also length
of the objects, because a different than null base pointer doesn't mean
that an object is not empty.
Change-Id: Ibee1849ef9fed15d32f2c8f2aad9b053846e46b7
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Before this change such code:
QJsonObject o;
o["blah"];
would create property "blah" and assign null value to it, while
this code:
const QJsonObject o;
o["blah"];
would not. The change unifies the confusing behavior. Now reading
a non-existing property, is not causing a property to be added
in any visible way.
Internally QJsonObject stores a special hash of undefined, but
referenced values. Such reference is supposed to not live long,
only to the first compacting or assignment.
Change-Id: Ib022acf74ff49bad88d45d65d7093c4281d468f1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
The operator should always return an undefined values for an empty
object
Change-Id: Ic38f7660d77c64b2d001967bc5109df4185db74a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
No actual reason for this test, except my curiority. Then again, it's
good to have this check, too.
Change-Id: I815fce7e4dbe76e21cac29beb1dbfc1083191d24
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
No actual reason for this test, except my curiority. Then again, it's
good to have this check, too.
Also checks that the last entry in the init_list "wins", which is
not how std:: containers work.
Change-Id: I4f7d1228f2b90a904b6c3f99e54afcd9970b723e
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
No actual reason for this test, except my curiority. Then again, it's
good to have this check, too.
Also checks that the last entry in the init_list "wins", which is
not how std:: containers work.
Change-Id: Ia284d093cd0029432372630e81657fb687b9516f
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The old unix locking code is no longer working on unix since it locks on
a file descriptor, but QSaveFile creates a new file, and as a result we
get the lock on the wrong file. Also there is no need to keep the lock
held only for reading as QSaveFile is atomic. It just needs to be held
when doing a read before writing.
As a result, since we don't hold the same lock, there could be a race
with an application running an older version of Qt if they are writing
on the same configuration file.
[ChangeLog][QtCore][QSettings] Fixed data loss while writing the config
to the disk fails.
[ChangeLog][Important behavior changes] The locking mechanism inside
QSettings has changed and is no longer compatible with the one of
previous versions of Qt. There might be corruption if two applications
running different versions of Qt are writing to the same config file
at the same time. You must also now have write permissions in the
directory containing the settings file in order to write settings
Task-number: QTBUG-21739
Change-Id: I0844a5e96c8bc1e1222a3dac6cc48170ca77fe1b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QRingBuffer is a fully inlined class used in many I/O classes.
So, it must be as fast and small as possible. To this end, a lot of
unnecessary special cases were replaced by generic structures.
Change-Id: Ic189ced3b200924da158ce511d69d324337d01b6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The default in QTextStream is to use the C locale, so default
QTextStream are not affected. When you set a QLocale on it, the default
was to use group separators (which is the QLocale default too). This
commit makes QTextStream respect a QLocale in which the
OmitGroupSeparators option had been set.
Task-number: QTBUG-39956
Change-Id: I00fbe12fca7f0287c7217deb487ded6582a03b52
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
They shouldn't exist in the first place. They exist in two cases only:
1) mistake by the user in the QLibrary or QPluginLoader constructors or
setFileName
2) as a kludge for setLoadHints before a file name is set (we need to
store the user's requested hints somewhere)
This is important for the second case, as otherwise all QLibrary and
QPluginLoader objects without a file name would share the setting.
Task-number: QTBUG-39642
Change-Id: Iebff0252fd4d95a1d54caf338d4e2fff4de3b189
Reviewed-by: David Faure <david.faure@kdab.com>
This commit makes replaces the loadHints member with a setter, a getter
and an atomic variable. The setter will not set anything if the library
has already been loaded.
Task-number: QTBUG-39642
Change-Id: Ibb7692f16d80211b52aaf4dc88db1a989738a24d
Reviewed-by: David Faure <david.faure@kdab.com>
Allow to alter the default configuration for categories by passing a
message type: All message types with lower severity are disabled in this
category.
This is useful for libraries, which shouldn't mess with the category
registry itself: Setting rules, a category filter ... might cause
conflicts and ordering problems, so this API should be reserved to the
specific application.
For the Qt categories, we have code in the default category filter that
disables the 'debug' category. However, this is hardcoded, and there's no
way so far for other libraries to get the same behavior. With this patch
one can get the same behavior:
Q_LOGGING_CATEGORY(DRIVER_USB_EVENTS, "driver.usb.events", QtWarningMsg);
[ChangeLog][QtCore][Logging] Added QtMsgType argument to QLoggingCategory
constructor and Q_LOGGING_CATEGORY macro that controls the default
category configuration.
Change-Id: Ib2902f755f9f7285d79888ec30e8f3cef95ae628
Reviewed-by: Alex Blasche <alexander.blasche@digia.com>
~QDebug() removes any trailing space if autoInsertSpaces() is true.
However, if one uses QDebugStateSaver the global autoInsertSpaces might
be false, but a space was added by a custom operator<<.
Explicitly check for this in QDebugStateSaverPrivate::restoreState. Remove
any trailing space if the local state asks for adding trailing spaces, but
the original one doesn't. Add a trailing space if the local state doesn't
ask for one, but the global state does.
Change-Id: I243b5c76d5ed2c1ec4820da35ab6e254da1551d9
Reviewed-by: David Faure <david.faure@kdab.com>
Passing this flag to QFileDevice::map() will allow writes to the mapped memory
without modifying the file that was mapped. These writes will be lost when the
memory is unmapped.
Change-Id: I7d46b044fc370585de8c06fdb4059f1f1be12d7d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This was prompted by https://git.reviewboard.kde.org/r/119221
Change-Id: Ia148f07f6d711df533693918bbedfa5e7dc02cd5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Similar to QTextStream::reset(), this resets the stream format to the
defaults. Its primary use is inside custom operator<< implementations,
where you'd want to have a fixed format regardless of the current
stream state.
Change-Id: I421d76c61f164579bb90cf4195cc5376e2dcf0f3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
We really do not need to do string parsing there.
Change-Id: Ie2277d9ff0d0445285b7108023941af111d9baca
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This revert commit de1d5815c1 which
wrongly fixed a typo. There is no typo because we use startsWith
with that constant.
Also added a test because the %{time} support was added in commit
93563952d0 but the test was missing
Change-Id: Ic96e6f21f989ca3a2905ec6c89b93d2627b77b40
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
The function gives a warning if an argument doesn't exist.
Change-Id: I6a4bbbaf2fd241ced06dc71edfe4ef69732606d1
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
Remove old message handler hack as we have a new and better api to
ignore warning messages.
Change-Id: Id967b2672fe3e3638db9977500118a19c2afb730
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Allow the user to disable the quoting of QString, QByteArray,
QStringLiteral by passing a "noquote()" stream modifier.
This requires another flag to be added to QDebug::Stream. To
keep BC we're using the QMessageLogContext::version field
to differentiate between QDebug streams created by earlier
versions.
Task-number: QTBUG-37146
Change-Id: I9b215eabfcfd754af16ea87f3ef928d698e37d77
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Check result in initTestData().
Previously, QFINDTESTDATA() was repeatedly invoked in init(). The
data-driven cd() test then failed when invoked stand-alone since
cd_data(), which relies on the data path, is executed before init().
Task-number: QTBUG-40067
Change-Id: I91039247e8dcaedd92fa990f1b5f82bc54b17c60
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
QMetaType::create can call user code and we should not keep mutex held as
this may cause dead lock.
Make sure the tst_qobjectrace actually emit some signal so the test check
there is no race if the receiver object is destroyed while
the mutex is unlocked.
Task-number: QTBUG-39990
Change-Id: I56ca1ae7a11cd7b33c1a68727370972862e11c2f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Like for integers, this is activated only on QLocales other than C.
[ChangeLog][QtCore][QTextStream] QTextStream now uses group separators
when writing floating-point numbers when the locale is not the C locale.
The old behavior can be restored by setting QLocale::OmitGroupSeparator
on the locale.
Change-Id: Ie451b91017746c3a9b11b6211b2ddd09cd295cd2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
It allows to create a QJsonArray instance in C++ by using
a similar expression to JSON. For example:
QJsonArray a = {1, 2, 4};
[ChangeLog][QtCore][QtJson] QJsonArray now supports
C++11 initializer lists.
Task-number: QTBUG-26606
Change-Id: Icc352e518d9649d24176c89e7113d200d5c50b0d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Factor out code to clear all mappings into
QFSFileEnginePrivate::unmapAll() and call that
from QTemporaryFile.
Task-number: QTBUG-39976
Change-Id: Ic1ceeba0ba4451866f1081fee430e5c458c0819d
Reviewed-by: Jonathan Liu <net147@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The assumption that we can test "en_US" and expect
it to behave a certain way is flawed in that most
of the formatting settings are independently
configurable by the end user.
Make the test more robust while attempting to preserve
as much testing as possible:
Make the decimalPoint/groupSeparator tests check for
a range of possible values. Check that they are not
the same.
Remove the date formatting tests and the firstDayOfWeek()
== Sunday test.
Make the time zone test accept a non zero extended
time zone. ("GMT+2" in addition to "GMT+02".)
Change-Id: Ie1f89793eb785f526c5f6fafbb6726ef8c6cb016
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
The combination of these unstable tests makes it very
hard to get changes through the CI system due to the
unrelated test failures.
Skip the following test functions:
tst_QIODevice::unget QTBUG-39983 (Mac)
tst_QThreadPool:expiryTimeoutRace QTBUG-3786 (Windows)
tst_QLocalSocket::processConnection QTBUG-39986 (Mac)
tst_QTcpServer::adressReusable QTBUG-39985 (Linux)
Change-Id: I96559bea0d437fd25966b6ccac1ece1490e06241
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
The setting of (static) messageHandler to qDefaultMessageHandler if null
was happening in multiple threads simultaneously, so it needs synchronization.
Used an atomic pointer in case qInstallMessageHandler is called from a thread,
but more importantly, initialized the static vars right away.
Improve auto test to ensure that qInstallMessageHandler(0) still sets the
default message handler.
Change-Id: I70335af38c1d28a1cdba1df8a79c6006f227422e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Conflicts:
mkspecs/qnx-x86-qcc/qplatformdefs.h
src/corelib/global/qglobal.h
src/network/socket/qnativesocketengine_winrt.cpp
src/plugins/platforms/android/androidjniaccessibility.cpp
src/plugins/platforms/windows/qwindowswindow.cpp
Manually adjusted:
mkspecs/qnx-armle-v7-qcc/qplatformdefs.h
to include 9ce697f2d5
Thanks goes to Sergio for the qnx mkspecs adjustments.
Change-Id: I53b1fd6bc5bc884e5ee2c2b84975f58171a1cb8e
The almostplugin has an unresolved symbol, and on Android
we compile with -no-undefined.
Change-Id: Ia631193890dfe8e7ac8e58087475164222d876fc
Reviewed-by: BogDan Vatra <bogdan@kde.org>
It enables you to get a valid QSharedPointer instance to 'this',
when all you have is 'this'.
Task-number: QTBUG-7287
Change-Id: I3ed1c9c4d6b110fe02302312cc3c4a75e9d95a0c
Reviewed-by: Richard J. Moore <rich@kde.org>
This macro is equivalent to arg.toUtf8().constData().
It is usable for "%s" arguments of qDebug(), qWarning(), qFatal(),
qCritical().
Change-Id: I2d9956e6651271e1e2183dce9c835511cf923bf3
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It is needed to control a QStateMachine object from QML.
Change-Id: I19271d97718af2d688c477647d6341f70fdef3ea
Reviewed-by: Alan Alpert <aalpert@blackberry.com>
Qtbase contains four identical implementations of next power of two,
these should be shared and the implementation made available to other
qt modules, as it is also used many places outside of qtbase.
[ChangeLog][QtCore][QtMath] Introduced qNextPowerOfTwo methods.
Change-Id: Id23fbe5ad6bae647b30d5a4212c0330e48a50278
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add conversion methods similar to those in QString to QByteArray. This
is often more useful than the QString version since std::string like
QByteArray are byte arrays.
[ChangeLog][QtCore][QByteArray] Added convenience methods to convert
directly to and from std::string.
Change-Id: I92c29d4bb1d9e06a667dd9cdd936970e2d272006
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Instead of using std::thread, use the WinRT ThreadPool to manage
threads. This allows for setting the scheduling priority, and provides
a path to enable XAML integration (which requires Qt run on a background
thread).
QThread::terminate() is still unsupported, and only the winmain thread
can be adopted due to the behavior of the thread pool when creating
tasks from the GUI thread. The associated tests are now skipped, and
all other QThread tests pass.
Task-number: QTBUG-31397
Change-Id: Ib512a328412e1dffecdc836bc39de3ccd37afa13
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Forward canDropMimeData() and dropMimeData() to the source model.
[ChangeLog][QtCore][QAbstractProxyModel] QAbstractProxyModel now
forwards the drop-related API.
Task-number: QTBUG-39549
Change-Id: Ib81fcec862586e4ecfb99b9e0f4eb1a16eace762
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Fix condition to allow return a valid pointer when head != 0.
Change-Id: I5215f7dfc44924016c2d9b67ab2d9935b5164d7a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
setEnabled() would race with isEnabled()/isDebugEnabled()/etc.
Change-Id: I2004cba81d5417a634b97f5c2f98d3a4ab71770d
Reviewed-by: David Faure <david.faure@kdab.com>
Currently QJsonValue and QJsonValueRef behave differently in
regard to the default values leading to confusion compile errors
depending on which of the two types one is actually using. Before
this change it was possible to write:
QJsonValue value = jsonObject["item"];
QString name = value.toString(QStringLiteral("default"));
but not:
QString name = jsonObject["item"].toString(QStringLiteral("default"));
Change-Id: Id1185acf339aa3a91e97848e85d068f84552df71
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
On Unix systems where the GUI event dispatcher uses a notification
system for socket notifiers that is out of band compared to select(),
it's possible for the QSocketNotifier to activate after the pipe has
been read from. When that happened, the ioctl(2) call with FIONREAD
might return 0 bytes available, which we interpreted to mean EOF.
Instead of doing that, always try to read at least one byte and examine
the returned byte count from read(2). If it returns 0, that's a real
EOF; if it returns -1 EWOULDBLOCK, we simply ignore the situation.
That's the case on OS X: the Cocoa event dispatcher uses CFSocket to get
notifications and those use kevent (and, apparently, an auxiliary
thread) instead of an in-thread select() or poll(). That means the event
loop would activate the QSocketNotifier even though there is nothing to
be read.
Task-number: QTBUG-39488
Change-Id: I1a58b5b1db7a47034fb36a78a005ebff96290efb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
In ICU the strength parameter decides whether a comparison is
case sensitive or not.
Fix mac comparison code. It can't have worked before.
Added some basic automated testing for QCollator.
Change-Id: I2646c464fd22ccd3a93c461fa3dba4bd1d4c7b4b
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Some codecs can't handle the range outside ascii properly and would then
fail to read the data back in correctly.
Task-number: QTBUG-15543
Change-Id: I4c02921e787a939eeec0c7a11603b5896d756aef
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If QNX does not have inotify there is no native engine.
Change-Id: I042efd0b59f916f9e0b55bbe5c7f3fe7bb6914c8
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
Reviewed-by: Fabian Bumberger <fbumberger@rim.com>
[ChangeLog][QtCore][QSaveFile] Now follows symbolic links while writing to
a link instead of replacing the link with the contents.
Change-Id: I5afd519cb9f96ae68fa4c23c33a18de75671a301
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: David Faure <david.faure@kdab.com>
Qt5 allows QAIM subclasses to reimplement the sibling() method. Unfortunately,
the default QAbstractProxyModel's reimplementation differs in behavior to what
the Qt4 version was doing. In particular, the Qt4 version used to use the row
and column as positions within the proxy model, while the Qt5 version mistakenly
does this at the level of source model. This is arguably broken; the caller asks
for a sibling of the proxy index, not for a sibling within the proxy model.
This change makes the QAPM::sibling work explicitly in the same way as the Qt4
code behaved.
The reimplementation of QAbstractProxyModel::sibling was introduced in
9dfba89c28. It was subsequently fixed with commit
999109866d not to return indexes from the source
model, but the logic was still different from the Qt4 version.
[ChangeLog][QtCore][QAbstractProxyModel] Fixed QAbstractProxyModel::sibling to
work in the same manner as the Qt4 code used to behave. Previously, Qt5's
implementation would treat the row and column as positions in the source model
instead of a position in the proxy itself.
Followup-to 9dfba89c28 and
999109866d
Change-Id: Ia25027b2ad9e4777ba28de2d2226d48f8cccf587
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This brings QTimer::singleShot on par with QObject::connect in
terms of the new Qt5 syntax. With this patch, it is now possible
to connect singleShot to a member pointer, a static function
pointer and a functor (with or without a context object).
The short code path for 0 msec is not yet implemented - it will
require further modifications to QMetaObject before it will be.
An additional SFINAE on the new singleShot overloads had to be
implemented to prevent tricking the compiler into believing
const char * might be a function pointer.
[ChangeLog][QtCore][QTimer] Implemented new style connect syntax,
including functors, in QTimer::singleShot
Task-number: QTBUG-26406
Change-Id: I31b2fa2c8369648030ec80b12e3ae10b92eb28b4
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
It's a common need to assign a variable to something when entering a
code block, and then revert it upon exit. qscopedvaluerollback can
be used for this. But as a convenience, this patch adds an
extra constructor so that you can "protect" and set a variable
in one go instead of using two lines.
Change-Id: If4b89d3a5ba32ef2304bda058b1b6050932612ed
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The existing waitForNotified method has the design limitation that it
doesn't allow the tracking of multiple I/O operations on a single
file handle.
Therefore we introduce an additional method waitForAnyNotified that
returns a pointer to the triggered OVERLAPPED object.
Change-Id: I536ed7f6828daa2b0ce03f2d662eeb10aa89ca99
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
QLockFile "noPermissions" test is not applicable with root
privileges.
Change-Id: I5779da524f24d0f1b9ef519d654856a6200da6bf
Reviewed-by: David Faure <david.faure@kdab.com>
Some of the QSaveFile tests are not applicable with root privileges.
Change-Id: I1a22906c0b14acf144f1849719152dfe9d79f426
Reviewed-by: David Faure <david.faure@kdab.com>
First and foremost, the STL-style iterators don't do this. Those don't
provide a guarantee that the container won't get shared again while the
iterator is active.
Second, there's no protection against a second mutable iterator being
created and resetting the sharable flag back to true.
[ChangeLog][Important behavior changes] The mutable Java-style iterators
like QListMutableIterator and QHashMutableIterator no longer set the
parent container to unsharable mode. If you create a copy of the
container being iterated on after the iterator, any changes done with
the iterator might affect the copy too.
Discussed-on: http://lists.qt-project.org/pipermail/development/2014-February/015724.html
Change-Id: Iccfe411d5558c85ae459cff944215614c392388e
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
warning: typedef 'Foo' locally defined but not used [-Wunused-local-typedefs]
Change-Id: Ifb1213414feb3aa5a5e46dac163e51ccd4925498
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There is no reason to have the test separated from other tools tests.
Change-Id: Ie5b19961c383f5e4bc1ad4452cba7b92153fc303
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When a UTF-8 sequences is too short, QUtf8Functions::fromUtf8 returns
EndOfString. If the decoder is stateful, we must save the state and then
restart it when more data is supplied.
The new stateful decoder (8dd47e34b9)
mishandled the Error case by advancing the src pointer by a negative
number, thus causing a buffer overflow (the issue of the task).
And it also did not handle the len == 0 case properly, though neither
did the older decoder.
Task-number: QTBUG-38939
Change-Id: Ie03d7c55a04e51ee838ccdb3a01e5b989d8e67aa
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
It may return null during program exit, due to QCoreGlobalData global
static already having been destroyed. If that's the case, QTextStream
needs to fall back to Latin 1, like QString::toLocal8Bit and
fromLocal8Bit already do.
Task-number: QTBUG-38316
Change-Id: I5949c8dec15b60f4a13b5d9307ed6abfc799fe20
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The tests for toString/fromString previously didn't run tests
for timezones with hh:mm where mm != 00.
Change-Id: I74da99c5b6890f46ce06446084a8129b4cbc7a02
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: John Layt <jlayt@kde.org>
The intent is to provide compile time validation of signals and to help
detect signal overloading in the future.
Change-Id: I9d5d46ed4b70c5d0cd407deb5928b1e76d37e007
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Useful for any application that can take URLs on the command-line, so that
full paths and relative paths can also be accepted.
Change-Id: I8a2c50f36d60bdc49c065b3065972fd5d45fa12a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The fact that we kick in a pattern study and possibly a JIT compilation
after an undocumented number of usages is suboptimal, for a number
or reasons: users may want to JIT compile a pattern immediately,
and at the same time they may not want a random delay in the program
(due to the pattern getting optimized at a random usage).
So: add an optimize() call to force an immediate pattern optimization,
and a pattern option to force an optimization on the first usage.
Change-Id: I95efdecfd31f11ca7cceb9c05037df613601a11c
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
On Windows, DataLocation currently returns the value obtained by
passing CSIDL_COMMON_APPDATA to SHGetSpecialFolderPath(). This is
the local non-roaming path. For actually storing settings, the roaming
path should be used (CSIDL_APPDATA). Introduce new AppDataLocation to
return that path and AppLocalDataLocation for the local path and deprecate
DataLocation.
[ChangeLog][QtCore][QStandardPaths] QStandardPaths now has new
enumeration values AppDataLocation, AppLocalDataLocation to be able
to differentiate between roaming and local paths on the Windows
operating system. DataLocation is deprecated in favor of AppDataLocation.
Task-number: QTBUG-38483
Change-Id: Ib1de8c7031a863ed5eac10c747de6f7ff1a090c7
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: David Faure <david.faure@kdab.com>
Use QTRY_COMPARE for dirChangedSpy, remove all unneeded
remove()/setPermission() calls (originating from the time
the test did not use QTemporaryFile), add more QVERIFY()
and messages for the other operations.
Task-number: QTBUG-30943
Change-Id: Ib3b78b1c6922539fd5e9238aa017fcdb554aacc8
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
The SSE2-based conversion only kicks in with strings with 8 characters
or more in length.
Change-Id: Ic1daad0845571be03547553cc001d83550f0c89c
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Commit 125bb81bef wasn't enough. Let's
just make it simpler and use a regular function.
Change-Id: I9627dedaa87873b4b138224afd182e4fd9a55265
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The ability to set a container to be unsharable has very little use and
it costs us an extra conditional for every refcount up and possibly
down.
This change is a no-op for current Qt 5. It shuffles a few things around
just so Qt can compile if you define QT_NO_UNSHARABLE_CONTAINERS. That
is done to ease the fixing of the code in Qt 6 and to make my life
easier: I'll keep that defined in my local Qt build so I can catch any
misuses of this deprecated API.
The newly deprecated methods are not marked QT_DEPRECATED because the
bootstrapped tools wouldn't build -- they're built with QT_NO_DEPRECATED
defined, which causes build errors.
[ChangeLog][QtCore] The setSharable() and isSharable() functions in Qt
containers has been deprecated and will be removed in Qt 6. New
applications should not use this feature, while old applications that
may be using this (undocumented) feature should port away from it.
Discussed-on: http://lists.qt-project.org/pipermail/development/2014-February/015724.html
Change-Id: I789771743dcaed6a43eccd99382f8b3ffa61e479
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
8dd47e34b9 removed the handling of the
BOMs but did not document it. This brings the behavior back and adds a
unit test so we don't break it again.
Discussed-on: http://lists.qt-project.org/pipermail/development/2014-April/016532.html
Change-Id: Ifb7a9a6e5a494622f46b8ab435e1d168b862d952
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
The "data" pointer became technically dangling after line 1866 did
copy = data;
as copy was the last reference to the original data. That made the
pointer address available to be reused by the system malloc(), which
sometimes happened, causing the unit test to fail.
Discussed-on: http://lists.qt-project.org/pipermail/development/2014-April/016588.html
Change-Id: Ifa6a27bd53a6e60392b77a6609f2d47148695211
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
IteratorOwner pointer specialization was failing for void* because of
an invalid function overload.
Change-Id: I80355ddd2b871c1fa2fa5bf5a4ed8bc7768fc3c9
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
These hooks only worked reliably with LD_PRELOAD on Linux/GCC, on other
platforms they depended on what exactly the compiler optimizer is doing
as well as some nasty assembler rewriting to actually access them. The
new system uses a simple array of function pointers that can be set to
custom hooks by tools that need this (based on ideas from Andre Poenitz).
This also covers qt_startup_hook (similar problem), and the Qt version
number that Andre had asked for.
Change-Id: I2c3e7950fd49b1b1d04176be34c2fff3293981b0
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
QStringList = QList<QString> already compiled, but was interpreted as
QStringList = QStringList(QList<QString>), which involves the QList
copy ctor. Adding the overload saves that copy.
Cannot use a using declaration here, since the return type is different.
Change-Id: I9f4feb2f97480d2d6a3b6fa7c71b5d511b623601
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We can squeeze, but not by discarding elements. Make sure the size of
the object stays intact after changing the reserved capacity.
I've also added unit tests for other containers, just to be sure.
Task-number: QTBUG-37750
Change-Id: I5135b095943b7589423c51cebcb52af792468e61
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
The code did discard the the data, so it wasn't affecting the comparison
result (tests added anyway), but it could cause crashes if the pointer
to the beginning of the data in the first 8 bytes of a page.
Change-Id: I618e68de329b65de34ef8c934934c3e631cc6c9f
Reported-By: Erik Verbruggen
Reviewed-by: Erik Verbruggen <erik.verbruggen@digia.com>
Only accept lower-case "true" and "false", as documented.
The old check didn't match either the documentation, nor the QSettings/
QVariant behavior (where, for a boolean value, any lower-cased content
that not empty, "0" or "false" is considered true).
Change-Id: I317d29c16a27f862001b9dff02e8298df8acf5a6
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Alex Blasche <alexander.blasche@digia.com>
Patch 9a08483d76 introduced a regression,
tst_qmetatype test was not meant to be removed.
Change-Id: I5456ffbbd9d9f8e461f828c6183e46dabf67952b
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Check whether a detach happened, and also check that non-consecutive duplicates
are properly removed.
Change-Id: Iac7a3d8fe5ed5a69a9a0b55ddbf95308f11122c2
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
QStringList << QList<QString> already compiled, but was interpreted as
QStringList << QStringList(QList<QString>), which involves the QList
copy ctor. Adding the overload saves that copy.
Cannot use a using declaration here, since the return type is different.
Change-Id: I119cc98e7e2df24549a1abb158543b729edc30ef
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Some data was never serialized (styleName, hintingPreference) and
some was incorrectly serialized (styleStrategy). This change also adds
auto tests for every applicable QDataStream version.
[ChangeLog][QtGui][QFont] QFont now serializes its data properly,
without any data loss.
Task-number: QTBUG-22814
Task-number: QTBUG-22946
Change-Id: I34e61b10662b7ad6c57054dacc7e1f522f5b5c5d
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
This patch aims to provide an updated test that follows changes started
in 10.7: new rule is that only root can access SystemScope settings. It
also disables the sync() workaround code path which is at least not
executed during the tst_QSettings execution and returns wrong value to
the test.
From Apple's documentation:
"Note that modification of some preferences domains (those not
belonging to the “Current User”) requires root privileges (or Admin
privileges prior to OS X v10.6)—see Authorization Services Programming
Guide for information on how to gain suitable privileges"
https://developer.apple.com/library/mac/documentation/CoreFoundation/Reference/CFPreferencesUtils/Reference/reference.html
[ChangeLog][QtCore][QSettings] QSettings now returns the correct value
for isWritable() when using SystemScope settings.
Task-number: QTBUG-9824
Task-number: QTBUG-21062
Task-number: QTBUG-22745
Change-Id: Ib6a1490ec596b99d189ec4de9a0f28ecfd684172
Reviewed-by: Liang Qi <liang.qi@digia.com>
- Record the last event ID with every callback. This event ID is passed
to FSEventStreamCreate when restarting the stream, so the watcher will
receive all events that occurred since invalidating the previous stream.
- Never start with kFSEventStreamEventIdSinceNow, because this will
generate a (bogus) soft-assert in FSEventStreamFlushSync in CarbonCore
when no event occurred since stream creation. The last globally
generated event ID is used instead to simulate the "now".
- Do not dispose and recreate the stream in the callback, but use a
queued signal-slot connection to schedule this on thread that owns the
watcher.
Change-Id: I02f5a845d9e27f9853ed97925ab9c7a5bc0dede1
Reviewed-by: Eike Ziller <eike.ziller@digia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Introduce function checking whether the system settings in
native format can be written to. If not, default to user scope or
skip the respective tests instead of failing.
Task-number: QTBUG-37822
Change-Id: I330aff9b79bb22254216f022af807e010bc8e8ba
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
This test takes more than 5000ms to finish some times, so waiting
for 10000ms should be enough to make it more stable on all
platforms.
../tst_qprocess.cpp:1072 :: [gui app]
QTestLib: This test case check ("proc.waitedForFinished") failed because the requested timeout (5000 ms) was too short, 6150 ms would have been sufficient this time.
Change-Id: I266ad0e65bf3c84e73b7ca6543dc15335dad4c99
Reviewed-by: Fabian Bumberger <fbumberger@rim.com>
Extending this to stock QNX as well since it is not
BlackBerry 10 specific.
- tst_QNumeric::floatDistance()
- tst_QNumeric::floatDistance_double()
- tst_QtJson::testNumbers_2()
- tst_QtJson::toJsonLargeNumericValues()
- tst_QtJson::parseNumbers()
Task-number: QTBUG-37066
Change-Id: If0e5d4fbefac5e8a0efed8ef8b1b7655ff6e7766
Reviewed-by: Fabian Bumberger <fbumberger@rim.com>
Constructing a QCollator is somewhat expensive, and made
localeAwareCompare really slow. As QCollator (at least with
the ICU implementation) is not thread safe, use one collator
per thread. This speeds up collation of a long list of strings
by a factor of 250 for the test case in the bug below.
Task-number: QTBUG-36149
Change-Id: I645cdc3546347d1dcc7a03b7563b628c7f756944
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Add more insert() tests, since the existing ones only covered
the index-based insert() variant and only movable types.
Change-Id: Ifce7a67be0bef45f926f13521873a1d77430e1e3
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The flag is not orthogonal to the rest, and e.g. checking with
flags & Invalid
will fail. Rather make it explicit by comparing with 0.
Change-Id: I428d5e71f5ecd05f61d543aaa78532548ef93d5a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Print a warning when an invalid logging rule is parsed.
Change-Id: I3bf9a6df4053d36b3803652b2faa86168d5222bc
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
The macro should stringify value of the given token not the token
itself.
Task-number: QTBUG-37547
Change-Id: I90f4fa613bd13d5a581828ab13f620b40dfd3593
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
testcase.prf cannot be loaded from pro file for various reasons,
see qtbase commit history for details.
Moved runtime testdata logic from pro file to testdata.prf, and
thus made is reusable in other test cases as well.
Change-Id: I500d08dc4951e4eda862071e4ddd3e0f6de8c3d2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The tasks might not have run yet at the time of the QCOMPARE, so we need
to acquire on the semaphore in order to ensure that this is the case,
just like in the previous testcase.
Change-Id: I1da72bb07c2f53760b3bf912fc26aaf10ed18d48
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
NormalizationTest.txt does not exist in the project root, but under 'data'
directory. TESTDATA is converted to INSTALLS rules in testcase.prf.
INSTALLS rules generated in testcase.prf does not set 'no_check_exist'
CONFIG variable. Thus qmake will not install NormalizationTest.txt since
it cannot find it from defined location.
Even TESTDATA has been incorrectly defined, NormalizationTest.txt
has been found in majority of the platforms thanks to QFINDTESTDATA
flexibility. However it causes problems on sand-boxed platforms such
as WinRT.
Fixed by defining the relative path to NormalizationTest.txt in TESTDATA
so that qmake can find the file when processing INSTALLS variable.
Change-Id: Id9a28db2a00b17d2c0136e6ff32f421b21137898
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
Reviewed-by: Liang Qi <liang.qi@digia.com>
Based on file system implementation for WinRT, the UNC paths are not
supported on WinRT, so lets disable corresponding tests as well.
Change-Id: Ib45ae618f39d5da39a822160096599b30204cf71
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
QMessageAuthenticationCode autotest does not have data folder for
TESTDATA. It seems that pro file is copy/pasted from another one which
actually have data. Removed the unnecessary statement since it caused
problems for https://codereview.qt-project.org/77981.
Change-Id: Ide753e5692bd2f469217760173a9b60f2f646770
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
Reviewed-by: Liang Qi <liang.qi@digia.com>
It is not sufficient that QSharedPointer<ForwardDeclared>'s default ctor
and dtor compile. Copy/move assignment/construction and swapping should work, too.
Arguably, there are more functions that should compile with just a forward-declared
payload, but this is a start.
Change-Id: I75470e3d4ba949c3e735c4078cbc123d53ec3007
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
tst_qdebug didn't test adding something else after the MyLine object,
so I didn't realize that a space was missing there. All debug operators
should end with maybeSpace(), but with the settings of the caller, so this
requires restoring the settings before calling it. To make it convenient
for all << operators, the destructor of QDebugStateSaver takes care of that.
Change-Id: I18ab78d99d7ee3be951082b5b5d34718ee60e21d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Check also for rules set in an environment variable QT_LOGGING_RULES.
This makes it even more convenient to set rules e.g. for just one run of an
application, without having to create a logging configuration file. It
is also more in place with the current way we enable/disable debugging
of parts of Qt via environment variables.
Change-Id: I4d05976f2b6c12bca472552ffa22345475cd01de
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
Reviewed-by: Tomasz Olszak <olszak.tomasz@gmail.com>
Use QStringRef to speed up the parsing of the left side of logging rules.
Change-Id: Idd4d75496e3865d092f2802c45928a414c14c615
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Do not accept rules with wildcards in the middle.
Change-Id: If6fa71629c46bc4127aa8bd475643bc0e8a9f57c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The documentation says that the left side of a logging rule has the syntax
<category>[.<type>]
with optional wildcard '*' as the first or the last character (or at
both positions.
However, so far we didn't allow
qt.*.debug
But what we did allow is implicit dropping of trailing '.', e.g.
qt.* matched also 'qt'
Fix these by splitting up the '.type' in advance, and then do string
matching only on the 'real' category names.
Change-Id: Iab50ad0fc673464e870f5ab8dfb3245d829b3107
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use the QTextStream stream operator for formatting 64 bit numbers,
just like we do for other numbers, too. This ensures all numbers in
a QDebug stream e.g. respect the hex and showbase modifiers.
The original reason for formatting qin64, quint64 with QString::number
is unclear (pre-dates the original qt4 git import). Maybe QTextStream
did lack proper support for 64 bit numbers back then.
Task-number: QTBUG-36841
Change-Id: I049516c2a8394c9c1a708f86c3d950418a20a957
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This reverts commits f12b0f9a38
("QByteArrayList: optimize op+"),
f96f2fe367 ("Enable QByteArrayList
tests"), and 4f23f0530a ("new
QByteArrayList class").
This class is coming back in Qt 5.4.
[ChangeLog][CHANGELOG FIX] Remove the line about QByteArrayList being
added.
Change-Id: I890ab2b34a9b3e575512eb306d0f241143a867cf
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
This patch adds the Objective-C NSData/CDataRef converters to
QByteArray
This will replace the current converters offered in QMacExtras
[ChangeLog][QtCore][Objective-C] Added NSData/CDataRef converters for
QByteArray
Change-Id: I7a0f14bee4271798db345f3c5efd26ac671a3ea4
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test instantiates enormous amounts of templates in one compilation
unit. All clang versions, that I tested, suffers from performance issues
while compiling the test, the cost depends on the version. The most
affected are shipped by Apple.
Task-number: QTBUG-37237
Change-Id: I0959c1a4a6faee448ae1dae5c1e70ee06cefbd9c
Reviewed-by: Simo Fält <simo.falt@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
We do not need to check all possible basic type combinations in
the autoregistration test.
Change-Id: Ibfb97a93d9d1862e669d843988976690bbc83c74
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Redundant and unused variadic macro arguments were removed. For macros
with known count of arguments, named arguments are preferred.
Common code was moved out from macros so it is not generated over and
over.
Change-Id: Ib5106555d0d3c6cadfbdbdbd614831240b6d762f
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
- QVariant can store (U)Int, (U)LongLong, Float and Double numbers.
Previously, QJsonValue::fromVariant() converted Floats into Strings
while converting the others to Doubles.
- Add unit tests for QJsonValue::fromVariant()
[ChangeLog][QtCore][JSON] QJsonValue::fromVariant() will now convert
single-precision Floats into Doubles instead of Strings
Change-Id: I457adbe29c37ada611d1c6d711c42866d63d4024
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
And takes a very long time to build if it doesn't run out of memory.
Task-number: QTBUG-37237
Change-Id: I8c7fae4d2d99ad59c6d6306da2df554a05955446
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
In the original change - cfb44c6528 - when
querying for the path of a file that did not contain a slash after the
drive indicator it would get the current path and return that as the path
that the file resided on.
However this meant that it would take the current path at that time which
may not be the actual path that was expected. So it was decided that
it should revert back to the original behavior which was to just return
the drive letter followed by the colon which would thus indicate still
that it represented whatever the current path was on that drive.
Change-Id: Ic57ae9227882a66e9a4c4d6537d7f2cae829165a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
MSVC 2008 is confused by TypeInStruct being a template, resulting in
\tst_qatomicinteger.cpp(189) : error C2027: use of undefined type 'QStaticAssertFailure<Test>'
with
[
Test=false
]
for int (and thus for all unsupported types). This appears to be a real
Heisenbug-nature compiler bug as it can also be fixed by adding
qDebug() << Q_ALIGNOF(TypeInStruct<T>)
before the static assert.
Task-number: QTBUG-37195
Change-Id: Ib2b60f3c1ffeb0b8bdeb1fb0c659655ce4ab10d8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This causes frequent compiler errors on Windows CE.
tests\auto\corelib\global\qtendian\tst_qtendian.cpp(140) : fatal error C1001: An internal error has occurred in the compiler.
(compiler file 'd:\orcas\compiler\utc\src\P2\main.c[0xCCCCCCCC:0xCCCCCCCC]', line 243)
Task-number: QTBUG-37194
Change-Id: I2adbc1e3b1896fbe86780aa26a15e918333a09f2
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
by default QT contains both core and gui already
Change-Id: I6f5b551104e40a024468e7cb62e302134e9472ec
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
These tests seem to fail because denormalized numbers are not
supported on QNX yet, so marking them as expected failures.
- floatDistance(denormal)
- floatDistance_double(denormal)
Task-number: QTBUG-37094
Change-Id: I79dbc78da6e9bef8466264fd2cab4af0ee8b868f
Reviewed-by: Fabian Bumberger <fbumberger@rim.com>
These tests seem to fail because denormalized numbers are not
supported on QNX yet, so marking them as expected failures.
- testNumbers_2()
- toJsonLargeNumericValues()
- parseNumbers()
Task-number: QTBUG-37066
Change-Id: Ifec95b936fb70253395dee4d1ca18e85870486a3
Reviewed-by: Fabian Bumberger <fbumberger@rim.com>
This is more consistent with e.g. qt.conf, where section names also
start with an upper case character.
Change-Id: I9ddaf72baeb9334d081807412512242d5d46cbbf
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Unit-test this by making the QList, QVector, QHash and QMap unit tests
be duplicated under strict-iterator mode. There's no test for
QLinkedList.
The tst_Collections test does not compile under strict-iterator
mode. It generated over 15000 errors when I tried.
The strict iterators required a small change: the difference_type
typedef needs to match the operators that get distances
(operator-(iterator)) and move the iterator around (+, -, +=, -=, etc.).
Task-number: QTBUG-29608
Change-Id: I834873934c51d0f139a994cd395818da4ec997e2
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: Jason McDonald <macadder1@gmail.com>
Add a new QMarginsF class to complement QMargins in the style of
QSize/QSizeF and QRect/QRectF.
[ChangeLog][QtCore] Added class QMarginsF to support handling margins
with floating-point values.
Change-Id: Iaaa95ec85f5d126d9d864fc4b607241a8c8a8f3a
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
So far we did bind the definition of Q_COMPILER_VARIADIC_MACROS to
C++11 (so gcc, clang will not define it in default gnu++98 standard).
However, variadic macros are a feature of the gcc preprocessor since
version 2.97, and are enabled in the default configurations on gcc, clang,
icc.
This might cause warnings and errors though if one enables additional
warnings in gcc, clang (e.g. by -pedantic). Anyhow, as a precedent
qglobal.h already relies on 'long long' ... The warning can be disabled
by adding '-Wno-variadic-macros'.
[ChangeLog][Compiler Specific Changes] Variadic macros are now enabled
more liberally for gcc, clang, icc. If you have warnings (because you e.g.
compile with -pedantic), disable them by -Wno-variadic-macros.
Change-Id: Ie979b85809508ad70cab75e6981f20496429f463
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This partially reverts 5764f5e6ea and
fixes the problem differently.
After this commit, "file:///foo" is still equal to "file:/foo", but
"foo:///foo" becomes different from "foo:/foo", as it should be.
Task-number: QTBUG-36151
Change-Id: Ia38638b0f30a7dcf110aa89aa427254c007fc107
Reviewed-by: David Faure <david.faure@kdab.com>
This is extremely useful, since the most common action after a failed
compare-and-swap is to loop around, trying again with the current
value as found in memory.
Code currently written as:
do {
Type value = atomic.load();
...
} while (!atomic.testAndSetRelaxed(value, desired));
Becomes:
Type value = atomic.load();
do {
...
} while (!atomic.testAndSetRelaxed(value, desired, value));
In most CPU architectures, the value that was found in memory is known
to the compare-and-swap code, so this is more efficient than the
previous code. In architectures where the value is not known, the new
code is no worse than before.
The implementation sometimes modified an existing function, sometimes
it added a new one, depending on whether more registers were needed in
the assembly (like ARMv6-7), the code became more complex (ARMv5), the
optimizer failed (C++11), or it was just plain equivalent (MIPS).
Change-Id: I7d6d200ea9746ec8978a0c1e1969dbc3580b9285
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This implementation is based on GCC's implementation of std::hash<FP>, but only
to the extent of checking for zero before hashing the bits. The bit hasher is
the Qt one; I didn't even look what GCC uses.
The check against 0.0 is mandated by the requirement to have
\forall x,y: x == y => qHash(x) == qHash(y)
which would be violated for x = 0.0 and y = -0.0 if we only hashed the bits.
Implemented out-of-line to avoid potential FP-comparison warnings, as well
as to be able to use the file-static hash() functions, which gets inlined
unlike qHashBits(), which cannot be.
[ChangeLog][QtCore][QHash/QSet] Allowed to use float, double and long double
as QHash/QSet keys.
Change-Id: I38cec4afb860f17e9f8be7b67544e58b330f8fff
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
This test can assume that the QObject::signalsBlocked property works as
advertized, so just check signalsBlocked() in repsonse to QSignalBlocker
manipulations.
Change-Id: I99e4ef9c4ed05c3840233d92a587636d2d78f59a
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Change 85e57653 caused a compile error for code that does
Q_DECLARE_LOGGING_CATEGORY(cat);
//..
qCDebug(cat()) << // ...
error: C3848: expression having type 'const QLoggingCategory' would lose
some const-volatile qualifiers in order to call 'QLoggingCategory
&QLoggingCategory::operator ()(void)'
This is a regression from Qt 5.2. Fix the error by adding a const version
of operator()().
Change-Id: I2fb04f2e155962adee0f98089fc5a159000bef56
Reviewed-by: Alex Blasche <alexander.blasche@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Added basic functionality to socket for WinRT. Even though not
all auto tests pass yet, this patch can be seen as a foundation
for upcoming work in this area. Reading from and writing to TCP
socket works and one can listen for tcp connections.
Change-Id: Id4c25ba1c7187ed92b6368c785c4f62837faded7
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
Conversion from UTC to local time will result in same datetime value,
if local time is in UTC.
Change-Id: Icd4ea57cb46cc97bcc8fce4f4e579bf64a4d4b10
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
It was not possible to get the actual process ID (in a cross-platform
manner) from QProcess, as the user would need to handle the returned
typedef (Q_PID) differently on Unix and Windows.
On Unix Q_PID is the actual process ID, but on Windows it's a pointer
to a PROCESS_INFORMATION structure, which among other fields contains
the process ID. Instead of returning a pointer on Windows,
QProcess::processId() will return the actual process ID on both Windows
and Unix.
[ChangeLog][QtCore][QProcess] Added processId() to QProcess. This
function will, unlike pid(), return the actual process identifier on
both Window and Unix.
Task-number: QTBUG-26136
Change-Id: I853ab721297e2dd9cda006666144179a9e25b73d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Initial submission of a new class QByteArrayList with the
purpose of aggregating and then joining QByteArray instances.
[ChangeLog][QtCore] Added new QByteArrayList class.
Change-Id: I2a9dc71ff7aadb19ebc129a0d47ac8cd33895924
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Allow configuration of logging rules from outside of the application,
either through a configuration file (.config/QtProject/qtlogging.ini),
or through a file specified by a QT_LOGGING_CONF environment
variable.
The logging rules from the different sources are concatenated: First
the rules from QtProject/qtlogging.ini are applied, then
QLoggingCategory::setLoggingRules(), finally from the environment.
This allows an application to overwrite/augment the system wide rules,
and in turn that can be tailored for a specific run by setting a
configuration in the environment variable.
[ChangeLog][QtCore][Logging] The logging framework can now be configured
with an .ini file.
Change-Id: I442efde1b7e0a2ebe135c6f6e0a4b656483fe4b1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Passing a constructor as second argument to foreach didn't work when
building with gcc.
For MSVC this already worked as a different foreach implementation is
used.
Change-Id: Id98444c699b4cebc14ea62076c5f7cba33ffb824
Reviewed-by: hjk <hjk121@nokiamail.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
The debug output of all categories will be visible by default,
except from the "qt.*" categories. "qt.*" categories are private
and their default debug output will be hidden.
[ChangeLog][QtCore][Logging] Enable qCDebug's for all categories except qt one's
Change-Id: Ibe147c8bbe0835a63b3de782288b9c3251321d8f
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
The basedir xdg spec says:
"All paths set in these environment variables must be absolute.
If an implementation encounters a relative path in any of these variables it
should consider the path invalid and ignore it."
Therefore we ignore relative paths including the empty string.
Change-Id: I8f779b78981018051b16de23b2514f2e62b7ab39
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The slot object was deleted after the mutex was relocked, which caused
a deadlock in case the functor destructor locked the same mutex again.
Change-Id: I5b4fb22fdb4483f91c89915872bfd548c31b0eea
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Code units 0xD800 .. 0xDFFF are not UCS-4, so we can't happily return them.
Instead, if we encounter a stray surrogate, replace it with 0xFFFD, which
is what Unicode recommends anyhow.
References:
§3.9 Unicode Encoding Forms
D76: Unicode scalar value: Any Unicode code point except high-surrogate
and low surrogate code points.
As a result of this definition, the set of Unicode scalar values consists
of the ranges 0 to D7FF_16 and E000_16 to 10FFFF_16, inclusive.
[...]
UTF-32 encoding form: The Unicode encoding form that assigns each Unicode
scalar value to a single unsigned 32-bit code unit with the same numeric
value as the Unicode scalar value.
§ C.2 Encoding Forms in ISO/IEC 10646
UCS-4. UCS-4 stands for “Universal Character Set coded in 4 octets.” It is
now treated simply as a synonym for UTF-32, and is considered the canonical
form for representation of characters in 10646.
§ 3.9 Unicode Encoding Forms (Best Practices for Using U+FFFD)
and
§ 5.22 Best Practice for U+FFFD Substitution
Whenever an unconvertible offset is reached during conversion of a code
unit sequence:
1. The maximal subpart at that offset should be replaced by a single
U+FFFD.
2. The conversion should proceed at the offset immediately after the
maximal subpart.
[...]
Whenever an unconvertible offset is reached during conversion of a code
unit sequence to Unicode:
1. Find the longest code unit sequence that is the initial subsequence of
some sequence that could be converted. If there is such a sequence, replace
it with a single U+FFFD; otherwise replace a single code unit with a single
U+FFFD.
2. The conversion should proceed at the offset immediately after the
subsequence which has been replaced.
[ChangeLog][QtCore][QString] QString::toUcs4 now does not return invalid
UCS-4 code units belonging to the surrogate range (U+D800 to U+DFFF)
when the QString contains malformed UTF-16 data. Instead, U+FFFD
is returned in place of the malformed subsequence.
Change-Id: I19d7af03e749fea680fd5d9635439bc9d56558a9
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
That commit made QString::toXxx (8-bit) functions use C++11 ref
qualifiers, so we need to match it here.
Change-Id: I45b50464d36f858d012b12e0cb511aae347ddb6f
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
UCS-4 iterator over a QString.
Kept private for now so we can still work on the API.
Done-with: Thiago
Change-Id: I377f8bb1921e591ee3292c08c3e097fb6bc7f0c4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Because they make sense. I'm even thinking that the char16_t version
should get a QString implicit constructor. Maybe both encodings.
Change-Id: Ifffc61dd890795fbbbd5f7cb5efb3e6287d1270e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
This fixes a serious regression from
7d72516b52.
[ChangeLog] QFileSelector: the identifier for OS X has been changed back
to 'osx' from 'mac', and 'mac' and 'darwin' have now been added as
selectors for Darwin OS (which is the base of both OS X and iOS).
Task-number: QTBUG-35073
Change-Id: I83183e34c5a697338cc1ddcac33a41bd379ded12
Reviewed-by: Alan Alpert <aalpert@blackberry.com>
When changing a filter so that a previously empty proxy model becomes
populated sorting was not applied correctly.
This was caused by using mapToSource for getting source_sort_column
from proxy_sort_column. For an empty proxy model this won't work because
no valid proxy index can be created in this case.
We now directly use the root index column mapping instead by doing
essentially the same as QSortFilterProxyModelPrivate::proxy_to_source
but without the sanity checks needed for external use.
The sorting feature of QSortFilterProxyModel has always assumed that
the number of columns is specified by columnCount(QModelIndex()) so
the behavior doesn't change.
[ChangeLog][QtCore][QSortFilterProxyModel] Fixed sorting when a
previously empty proxy model becomes populated because of a change in
the filter.
Task-number: QTBUG-30662
Change-Id: I21322122e127889dfadc02f838f0119ed322dcab
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
introduced by b0b22e8d49 .
Change-Id: Ia57331ce9373a414f2bc56962412f20ef83bd7ca
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
This simplifies the code a lot and avoids silly mistakes where a
specific integer type is missing (such as char16_t).
Change-Id: Id91dfd1919e783e0a9af7bfa093ca560a01b22d1
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
This aimed to disctinct joining types "L", "T", and "U" from just "U".
Unicode 6.3.0 has introduced a character with joining type "L" and
Unicode 7.0 will add a few more characters of joining type "L", so
we'll have to deal with it anyways.
[ChangeLog][QtCore][QChar] Added JoiningType enum and joiningType()
method that deprecates the old QChar::Joining enum and joining() method.
Change-Id: I4be3a3f745d944e689feb9b62d4ca86d1cf371b0
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
q_func() which is declared in Q_DECLARE_PUBLIC is usually private.
We should use q_ptr directly in QObjectPrivate::connect, otherwise
it does not compile when trying to access the private q_func
Change-Id: I235165a0994327102dbb31c390c2cafdffe806dc
Reviewed-by: Kurt Pattyn <pattyn.kurt@gmail.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
The support for QArrayData variadic arguments without C++11 for GCC
has been removed in commit 69478da0f0 . Change the autotest to reflect
that, too.
Change-Id: I40468f5d67cb2db553fd7a7d5b604f46403ac538
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Even if the system is not under high load, this test can generate 4
updates on Windows. This is seems to be because the timer actually
triggers before its supposed to (sometimes the second start() triggers
an update right before the animation is done (at timestamp 399 for
instance), forcing it to generate yet another timer event in order to
reach the end)).
Under high load conditions, too many things can break this test,
usually it finishes even before the pause(), causing the
QVERIFY(animation.state() == QAbstractAnimation::Paused);
to fail.
Change-Id: Id94c0d16656675bc6165b7795f3c41a30616a3ba
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Allows us to sanity check the iOS build in the CI.
Change-Id: I16f9bfafef3988dcab6efd3155503ca0d0b4d1d8
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
