MSYS bash (and other msys-compiled executables) perform path
transformation much like Cygwin. This causes syncqt path
substitution to not work correctly, so use 'pwd -W' to get
the Windows version (though with forward slashes) of both
relpath and outpath.
Change-Id: I808e3ef9206ed5f5bd8b6879d12afe664e589e0c
Reviewed-by: Alvaro Burnett <alvaroburnett@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
... instead of scoping the defines in qconfig.h, which relied on the
Q_PROCESSOR_xxx defines and meant that we had to include qconfig.h
after qprocessordetection.h, which added a whole bunch of other
dependency issues.
We now let configure write QT_COMPILER_SUPPORTS_xxx to qconfig.h as
before, without any scoping, and then undefine the ones that don't
apply for the given processor. This means we need to include
qprocessordetection.h before qcompilerdetection.h in qglobal.h,
but the former does not depend on the latter, so this should be
fine.
Change-Id: If00c00d405463e9626fa0f7f5e6b17f68778904f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
It makes more sense to keep this workaround header together with the other
libxkbcommon files for a better access point since it's used by several *.pro
files.
Change-Id: I63d4eb58f6e7f3852834e41c4b6e058a2c962233
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
1) -qt-xcb
a) Use xkb from the 3rd party libs. As it is done for the other xcb
dependencies when qt configure with -qt-xcb.
2) -system-xcb (default)
a) If xkb found then use xkb from the system. (Currenly xkb is not
enabled by default when configuring libxcb library).
b) If xkb can't be found on the system then keyboard state will be
updated from X11 core events.
Change-Id: I7c3dbce6daa2cec52067cd5af80f19040233a0db
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
This library is required by the XCB platform plugin. As we depend on
very recent version of this library and it might not be available
in base repositories of distributions, users can use -qt-xkbcommom
switch to build Qt with the bundled version.
Change-Id: I0ed2a5cc2f1df98b0e7cc926cabfa69818674e08
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
The configure script does not actually produce a "confclean" make target.
Task-number: QTBUG-27735
Change-Id: Ia0f9e33e50c35cc6bb2941853e518a40fc9edaee
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The warning is more likely to be seen if it's closer to the end of the
output.
Also report whether we found xkbcommon in the main output. Note that
xkbcommon is used by Wayland too, so it's not dependent on QPA or on
the XCB backend.
Change-Id: I143327eea4e17fa06bc7c24c677ae0bd00e65711
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Keep options sorted and use indentation to group together related
options (QPA backends, image formats and SQL drivers).
Change-Id: I97d330a13a4daa4567ff741dc26e11f458ae7f53
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Neither /dev/null nor NUL work with Qt on Windows. For now, use
an empty file for the cases where qmake is used with /dev/null.
I filed a bug for this:
https://bugreports.qt-project.org/browse/QTBUG-30562
Change-Id: If5351214ae5a0ebe50ae46b155c327ca0dc59f98
Reviewed-by: Alvaro Burnett <alvaroburnett@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
A gap after option name is needed to select it with double-click.
Also I added padding periods for -testcocoon because it has no them before.
Task-number: QTBUG-30589
Change-Id: Ib5b970f9b17cad43609fbc53dd05a995aaf29b45
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
For now there's only one architecture per host/target, but
this will change once we start detecting the CPU features
for both device and simulator on iOS.
For convenience we set QT_CPU_FEATURES to the resolved
value of the current architecture, so that simd.prf still
can use QT_CPU_FEATURES directly.
Change-Id: I28e8b339a5c30a630e276165254dba09a3da6940
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
So that the user doesn't have to pass -no-pkg-config and -nomake, when
we already know that those flags are needed and that the build will break
without them.
Change-Id: Ic07e02bc1800f177cf09f704104c1a76bfc50aa2
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
QT_CPU_FEATURES is internal and only used by simd.prf, which is
also internal. This matches the available CPU features which are
detected using config tests and written to CONFIG in qmodule.pri.
Change-Id: I8eb35448e2954a54c228d3617f29afc0283a7db5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
We don't need it. Let linux-g++ be the default on all Linux builds,
period.
Task-number: QTBUG-30590
Change-Id: I26c73bf4f054684763b64ef5651b3488363ea7a1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The default lib and include dirs are resolved using the target
compiler and with a sysroot, so they are not relevant for host
builds.
Change-Id: Iceb2eb865d0732b9a6f5896ad126200ae8e8a04e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
We now have host_build to distinguish the two, and we load
qconfig.pri from both the host and the target mkspec, with
host_build set correctly.
Change-Id: I8b8b80d5487d10bb1d4585d27d10300f609a7775
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
We depend on Xcode for building Qt itself and user application on Mac OS.
The user may have an Xcode install that is not set up properly, in which
case we would fail compilation in mysterious ways. Instead we try to
detect misconfigured or missing Xcode installs as early as possible.
We try to detect if an Xcode install has not been chosen yet, and
if the user has not accepted the Xcode license agreement. We need to
do these checks both in configure, as early as possible, and in mkspecs
on Mac OS, as we need to error out if the user tries to build an app
with the Qt SDK, but with a broken Xcode install.
Change-Id: I4e3a11077a61dc5d4ee2c686d01044a9bb2c1c79
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
We always use the xcodebuild/xcrun/xcode-select binaries in /usr/bin,
as these will dispatch to the right binary based on what Xcode version
has been chosen using xcode-select -switch. This fixes an issue where
a tool was in the path from another Xcode installation. We can rely on
the tools as they are present on a clean Mac OS install.
Change-Id: I1d3cc1e92604f9be6d6f14639cb6322234edd696
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This means we have to bump the deployment target to Lion (10.7), as the
LLVM 'libc++' C++ standard library does not support Snow Leopard (10.6).
For iOS the deployment target has to be bumped from 4.3 to 5.0, but we
don't enable C++11 by default yet as it's not tested enough on iOS.
Users who wish to deploy to 10.6 need to build their own Qt,
passing -no-c++11 to configure.
Change-Id: I7b5d20ab002db889d1091a4b7ff600f62caa7f06
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
We used to disable NEON completely, as the iOS toolchain does not
handle the GAS syntax of the pixman draw-helpers. But we can limit
the disabling to just the draw-helpers, which means we get NEON
optimization of eg. QImage and QString.
Change-Id: If350b06ce521cca8b24468be5a168ff21e9e7124
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
We're trying to parse GCC output, so let's make sure that they are in
English. I've seen some reports that "search starts here" was
translated to some locales.
Change-Id: If09b1f45607f65d054496db65418e413b8aa8d48
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
the de-duplication has the side effect of sorting, which is a very bad
idea: x-compilers tend to append the host library paths at the end, and
we really want them to stay at the end.
and the lists should have no duplicates to start with. should we find a
compiler which breaks this assumption, we can use qmake's $$unique()
strategically.
Change-Id: I01560e3c33736c2dfffdb05d5c960c492439c946
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
evdev support in eglfs is now guarded by QT_NO_EVDEV, so this
check is no longer required. This allows eglfs + tslib to be
a supported combination.
This reverts commit a95e396a83.
Change-Id: Icf7c15121b7eca1131d412b05b956cd5d7f189ae
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
the dlls being in lib/ is kind of an accident (a side effect of how
qmake builds them). in fact, the libdir should be entirely irrelevant
for windows deployments (and indeed, the SDK is delivered with dlls only
in bin/).
Change-Id: If47e72b24774721a61ba63847f6132f88ff110be
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Jocelyn Turcotte <jocelyn.turcotte@digia.com>
Otherwise, we end up with an empty QT_LFLAGS_SQLITE and the plugin
won't link.
Change-Id: I026f60bf9cd075218dbe2888fbb7fc82782b27ca
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
I don't need that warning on my Mac.
Change-Id: I18c06135ba88a037103fdda0982976f4a87c553e
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Reviewed-by: Gatis Paeglis <gatis.paeglis@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Since c45595d648, we use the toolchain
based on the XCode SDK, not the one in $PATH. Turns out that the Clang
that comes bundled with XCode 4.6 reports its version as
Apple LLVM version 4.2 (clang-425.0.27) (based on LLVM 3.2svn)
Instead of "Apple clang". So we need to match for (clang|LLVM).
Extended regular expressions (with -E) were necessary because the sed
that comes with Mac OS X is apparently broken and will not work with
\(clang\|LLVM\). GNU sed accepts -E as an alias for -r, meaning
extended regexps.
Change-Id: I5a15de30721216b086c3d39a080cc6496c503985
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
There is no logic in configure to detect compiler capabilities
in the host- and cross-compilers separately, so if the
cross-compiler has more capabilities than the host compiler, the
compilation will break. This was the case for c++11 on Mac, which
is supported by the Android cross-compiler but not by default on
the host. There is a fix planned to enable c++11 on Mac, so
this is a temporary patch to work around the problem by disabling
c++11 explicitly until it has been fixed.
Change-Id: I2048dc7f63991c97b11b3980ac91292d2c9b7ce4
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
this is cleaner than having it parse qmake project files.
the only remaining built-in version extraction is the fallback to
qglobal.h needed for bootstrapping.
as a "side effect", this fixes the build of modules with mismatched
versions centralized in .qmake.conf, as this was simply not handled so
far.
the -mkspecsdir syncqt option goes away, as there is no use case for it
any more.
Task-number: QTBUG-29838
Change-Id: I6912a38f0e93a26bc267a9e3d738506fd3ad431b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jocelyn Turcotte <jocelyn.turcotte@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
It is needed for implementing the shortcut functionality in the xcb platform
plugin and for the compose key input context plugin.
As announced on the wayland-devel mailing list - the libxkbcommon 0.2.0 is
the first grown-up release of the library (Tue Oct 23, 2012). [1]
[1] http://lists.freedesktop.org/archives/wayland-devel/2012-October/005976.html
Change-Id: Id5d45e1a5afe49cf9ec5312318bd173f5a067f62
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
it's weird that the output from the two variants is differing, and that
after building qmake it appears to hang.
Change-Id: I2ac3ace11e958effe787b13e1300eb1d2839ae98
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
7de9d3709 broke them, because suddenly every -l* switch was parsed as a
library. fix this by re-arranging how the options are parsed.
this obsoletes d7ab351cdd as well, by being more generic.
fwiw, this syntax is stupid to start with, because all unknown -l*
options are implicitly libraries and create confusing configure
failures. emulating the compiler/linker command lines isn't such a great
idea ...
Task-number: QTBUG-29174
Change-Id: I11bac7a6f458664dff8cbe57ed9cd33a08d5e9ec
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
note that the value is written verbatim to the qmake file, so additional
quoting may be required on the command line.
Task-number: QTBUG-30102
Change-Id: I02ca9a44fae82b6932982e6385508b8a304cc1e7
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Since we use the Clang from Xcode's toolchain now, the OS version is
not relevant.
In practice this means we will use clang for Xcode 4.2 and up, which
means it's possible to use clang also on Mac OS 10.6 (Snow Leopard),
where Xcode 4.3 is not available.
Change-Id: I9817e237cdd82d10b93aaaa3c90e35767cdca751
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For Mac OS X we currently specify build tools without an absolute path,
which means we end up using the ones in /usr/bin. This is wrong, we
should be using the tools from the toolchain of the chosen SDK.
For iOS we do specify an absolute path, by resolving the toolchain
path in the iOS makespecs.
To solve the situation on Mac OS X, we move the logic of resolving the
toolchain path to sdk.prf, and share it between OSX and iOS.
For configure we need to duplicate some of the logic from sdk.prf, as
configure pulls out QMAKE_CC and QMAKE_CXX for running some initial
tests and building qmake. The new macSDKify function also solves
the issue of missing sysroot and deployment version in the flags.
Change-Id: Ib1d239c9904cf3ccee5214b313cf6205869a1462
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Is needed now that we write QMAKE_MAC_SDK with a !host_build scope
in qdevice.pri.
Change-Id: I298cc660b496460190337c175aef684a5522d5cb
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
qdevice.pri is not target/host specific yet, so we were loading
it and overriding QMAKE_MAC_SDK to iphonesimulator eg., even
for host tools such as moc.
Change-Id: I10277e60e1da84dda239e32a6f19b40dc48f084a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Version 3.1, shipped with Xcode 4.3, has the same issues compiling Qt's
AVX code.
Change-Id: Icb778fbd9d61f01aa84365661af050c9442d4d7f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Based on the Necessitas project by Bogdan Vatra.
Contributors to the Qt5 project:
BogDan Vatra <bogdan@kde.org>
Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
hjk <hjk121@nokiamail.com>
Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Paul Olav Tvete <paul.tvete@digia.com>
Robin Burchell <robin+qt@viroteck.net>
Samuel Rødal <samuel.rodal@digia.com>
Yoann Lopes <yoann.lopes@digia.com>
The full history of the Qt5 port can be found in refs/old-heads/android,
SHA-1 249ca9ca2c7d876b91b31df9434dde47f9065d0d
Change-Id: Iff1a7b2dbb707c986f2639e65e39ed8f22430120
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
If the command is quoted, it can contain anything but quotes (we do not
support escaped quotes, so single quotes have to be used). If the
command is unquoted we look for the first closing parenthesis. We used
to do this using .*?, but the greedy modifier '?' didn't seem to work,
so we now use an inverse character set.
Change-Id: I40660ce7aef6a6b6d480292d28da1b079bb161da
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Instead of setting it explicitly to 10.6. Before 736e4258a this was
not a problem, as we were hard-coding the version flags as part of
the C/CXX_FLAGS for each makespec, so getQMakeConf would pick
them up automatically. When 736e4258a introduced sdk.prf as the
place to resolve these flags in a single place, it broke the
qmake build for macx-clang-libc++, as we were then falling
back to the 10.6 target hard-coded in configure.
We fix this by duplicating some of the logic from sdk.prf, by
pulling out the QMAKE_MACOSX_DEPLOYMENT_TARGET variable
and adding to the C/CXX_FLAGS.
Change-Id: I04afc7525031727c2504588c70dd3f7892cc8e42
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is enabled only for -developer-builds and only for certain
compiler-version combinations that are in a whitelist.
It also requires each library, plugin or tool to declare whether it is
supposedly clean of warnings. When most targets are clean, we can
consider inverting.
Change-Id: I17b5c4e45aee5078f9788e846a45d619c144095a
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Should be applied to Qt modules. Not interesting for third party
users.
Change-Id: I8fce821af397e3ace011a426c762319f6d30004f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
The dbus_watch_get_fd function was deprecated in D-Bus 1.2 (technically,
in 1.1.1, but that was a development release) because it had a bad name.
Sockets on Windows have file descriptors, but they are not shared from
the same pool as the CRT library's file descriptors.
This commit raises the minimum required version of D-Bus to 1.2. This is
the first requirement raise since this code was introduced in 2006. For
some reason, the D-Bus 1.2.0 release seems to be missing, but 1.2.1 was
released on 04-Apr-2008. That's ancient enough for all distributions
Qt 5 is supposed to run on.
Change-Id: Ia6bbc137fffbb27c77290ed3e32d3380f0ae3c54
Reviewed-by: Lorn Potter <lorn.potter@jollamobile.com>
The LLVM version in Xcode 4.5 and below does not handle the GNU
assembler syntax in the pixman assembly file.
A possible alternative workaround is to include a preprocessed assembly
file using https://github.com/hollylee/gas-preprocessor.
Change-Id: Id95add669c60d3a7da823e5975afdd1f88f71977
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Clarify in the configure --help documentation that the text between
parentheses in the -make option indicates the default parts, not all
the parts that can be chosen from.
Task-number: QTBUG-28826
Change-Id: Iac9cf294b8054823ecfaf262aeafab7779ce4c8b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Must use ; as the path delimiter instead of :
Change-Id: I549e1652ef5bbae09c8fddec3e83ac9f52cec3a4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
this makes it possible to exclude modules from the build without moving
their sources out of the way. substitutes the much-requested -no-webkit.
not adding a symmetrical option, as it is relatively pointless:
to build only specific "leaf" modules, you only need to run
"make module-qt<module> ..." once you configured. and removing
particular "intermediate" modules is achieved with this very option.
Task-number: QTBUG-26697
Change-Id: I25cebdbd029885a2c653c4cde696f9bb78691768
Reviewed-by: Tuukka Turunen <tuukka.turunen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Replace the old sed / template @FOO@ method with echo.
Enable MSYS bash to build qmake.exe
Use qmake/Makefile.unix for all win32-g++ builds.
Change-Id: I6e27d69b28d27131838bbbb3a4ee5a08b470f31b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Instead of setting -isysroot in both arch.test, compile.test, the various
mkspecs, and sdk.prf, we now propgate the chosen SDK as the qmake
variable QMAKE_MAC_SDK, which is then handled exclusivly in sdk.prf.
The QMAKE_MAC_SDK variable, and -sdk argument to configure, is expected
to be of the short-form name, eg macosx or iphoneos, not a full path, as
that's what Xcode also expects. We take care of translating that into
a full path for -isysroot/-syslibroot in sdk.prf, using xcodebuild as
a helper.
Change-Id: I281655b2fa5180c6e78ffdce36824e4a91447570
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
So that mkspecs and features may rely on the host_build test.
Change-Id: I18fee4820d9e2904285afcc7ddb8f1cc3d025fef
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... instead of as a fallback in default_post.
it was this way in qt4, and it requires less code to be written in the
end. we are already doing it for debug/release as well.
Change-Id: I6e02849d61d14a18375cf64a5990768931ebac48
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The chosen makespec may spit out errors for various reasons, which will
influence steps such as detecting pkg-config or the architecture test.
It's preferable to catch any issues with the makespec as early as
possible and exit configure before the errors propagate to tests.
Change-Id: Iecbf3217c36dea9f5e0677c58171b72cb6ce1e0b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Passing -sdk to configure should affect the target build, not host tools.
We skip passing MAC_SDK_FLAG for the host arch test as well, since as for
qmake the SDK should only apply to the target.
Change-Id: I3902355715234b9300a65d3095b9c925d9492311
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
The exact same hunk is present 100 lines below.
Change-Id: Ia3d61037b29186368e30f95f4162282d38bca972
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This allows for example the iOS mkspecs to use xcode-select to get the
path to Xcode's /Developer directory, which is then in turn used to
set up QMAKE_CXX (which is needed by configure).
Coprocess is GNU awk specific, so we're just using getline.
http://www.gnu.org/software/gawk/manual/html_node/Getline_002fPipe.html#Getline_002fPipe
Change-Id: I7e88112bea68f039361d6e96ee581eedf129ab02
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Change the default libexec directory to 'lib' on Windows for default
configurations. This makes sure that e.g. qtwebprocess can actually
find & load the right Qt libs.
A separate libexec directory was introduced to avoid conflicts between
a system-wide Qt in PATH and a custom Qt installation. However, since
there are no system wide Qt installations on Windows this isn't an
issue, but getting the executables to find its Qt libraries is.
Alternatively we could have also placed it in the 'bin' directory.
However, putting it in the 'lib' folder carries the notion that,
unlike the binaries in the bin, the libexec executables might have
to be deployed with a target application.
The exception is when a separate archdata prefix is specified, and
$$archdata/lib won't contain Qt libraries. In this case we use libexec
like on the other platforms too.
ChangeLog: [Qt for Windows] Fixed launching of QtWebProcess.exe by
changing default libexec directory to 'lib'.
Task-number: QTBUG-29661
Change-Id: Icbb15fb98474d6fef8ac9310f2e2b482d3282f79
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Jocelyn Turcotte <jocelyn.turcotte@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
On Windows, it's completely different and we don't currently support that
compiler anyway.
Change-Id: Ie3365ea103c93c63e79ebb1d4908c361173ac449
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The current code matches *g++*, which matches "clang++" and detects
Clang as GCC. That's highly incorrect.
Change-Id: Ifd85bbd35aa130be3094fc75d471614d06ca23bd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Keeping accessibility and only disabling the bridge will
enable more builds to work.
Warning about disabling accessibility disabled is needed
because in QStyle it is used to discover semantics about widgets
(if a toolbutton is in a toolbar).
Change-Id: Iae4e6ab63479743bdd70cba4b1954ec7cf3f88e9
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
eventfd(7) uses less resources than a pipe, as it only needs to store a
single 64-bit integer, as opposed to a full buffer.
It was introduced first on Linux version 2.6.22 and glibc 2.7. However,
both the configure-time test and the runtime usage require the use of
EFD_CLOEXEC for thread-safety, so this code will be enabled only for
Linux 2.6.27 and up as well as glibc 2.9 and up.
Change-Id: Ic7e10b28d7b1d4ca24be614ed84055c4429a68e4
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
On Mac, GCC and Clang print "(framework directory)" at the end of the
directory listing for includes if that's a framework dir. The directory
with "(framework directory)" at the end does not exist, so it doesn't
affect anything by being there.
But we don't have to keep the list longer just for that.
Change-Id: I3d031d3d15c75801ec0d6112b2c913bd63e5def3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Make the settings path to be relative to $prefix, instead of absolute.
And update the configure -help output to match the actual code.
Change-Id: I71e4ad6e3db046fec95ef057ae7f7bc566bc5794
Reviewed-by: Sune Vuorela <sune@vuorela.dk>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
it's completely broken, and i have no time to fix it properly now.
configure runs no qmake -r by default any more, so it's fast enough.
Change-Id: Ib2b4c68f1fc2fe95accecbe93dd5a87c9b015692
Reviewed-by: David Faure (KDE) <faure@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
The configure.exe already supported the -directwrite flag for some time.
This commit adds this flag to the configure script as well so
environments which use MinGW as cross-compiler can now also
optionally enable DirectWrite support.
The original configure.exe pieces were added in commit
c0fed43b04dec8bd549043d3ea5e28908128082c of the Qt4 repository.
The directwrite argument which this commit adds to the configure
script and the behaviour of it should be exactly the same as the
current configure.exe.
To get Qt built with DirectWrite support using the MinGW-w64 toolchain
at least mingw-w64 trunk revision 5451 (Nov 10 2012) is needed
Change-Id: I519718068cf5732c7ebcbf0a0fafb6b747db0bcf
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This means the xcb plugin library will be named libqxcb.so instead of
libxcb.so, which doesn't clash with the system's libxcb.so. We need to
consistently apply this on all platforms for static linking to work.
Change-Id: I1640a7cae7b9846bbe62b19ab1c2c5bad7d02b4c
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Configure will now generate QT_DEFAULT_QPA_PLUGIN qmake variable
to specify the default QPA plugin.
"CONFIG += qpa_default_plugin" statement in application .pro file
will add the default QPA plugin into QTPLUGINS.
"CONFIG += qpa_minimal_plugin" statement in application .pro file
will add the minimal QPA plugin into QTPLUGINS.
Task-number: QTBUG-28131
Change-Id: I12a241005f30b37467d783b50f0369b47e605e68
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
the compile-all-mocs-as-one-file feature is gone for years
Change-Id: I6c35bce59c36b6920af2498661172b5938eeba52
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
they cannot be legally used outside qtbase - it's the antithesis of
modularization.
Change-Id: I847844ea0ddce599f130f396d68cb61fa8f34135
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
-largefile is regarded as a library named argefile and added to
Makefile as a link flag. It will cause a link error.
Change-Id: I8ac30896d4e473f7e98c937c8906b1b9c620cf1e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
User applications are those that users run directly, whether it be for
development or not. The executable binaries that the user does not
usually run but is still required for proper functioning are called
"program executables" in Autoconf and they are placed in libexec.
This commit adds support for "program executables" in Qt by adding the
-libexecdir option to the configures, the qmake variable
QT_INSTALL_LIBEXECS (note the plural, to match all other properties),
and QLibraryInfo::LibraryExecutables.
At the time of this commit, the only expected "program executable" is
the QtWebProcess, the WebKit2 helper process from QtWebKit.
Change-Id: I66c3a3e0cf7f9d93b5f88f55f18e957faff608fc
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
The include paths that the mkspecs set into the OpenGL/AGL frameworks
must take the SDK into account.
(The headers in 10.8 have slightly changed wrt 10.7, leading to compile
errors because framework style includes (<OpenGL/foo.h>) within the system
headers are resolved to the SDK framework headers.)
Change-Id: I6113cdb95b462d587f593682e03e81e920f3f672
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Added prepare_docs to qt_build_config.prf (it was added
directly in configure in the source branch)
Conflicts:
configure
tools/configure/configureapp.cpp
Change-Id: I1337c69fc62b1c934e3e39b4409e4857440c9db8
This commits adds a -qmldir configuration option for the configures to
allow the user to change the default location (it defaults to
$archdatadir/qml).
It adds a QLibraryInfo::Qml2ImportsPath value for
QLibraryInfo::location, a qmake property of QT_INSTALL_QML and a qt.conf
configure location entry "Qml2Imports".
At the same time, it makes the qmake .prf files dealing with QML plugins
be the QML 2 version. Those files are new in Qt 5, so we have the option
to choose which version we want to use.
Discussed-on: http://lists.qt-project.org/pipermail/development/2012-October/007136.html
Change-Id: I8c1c53e8685a5934ed0a9a42ba5663297b81a677
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Architecture-depedent Qt data defaults now to something under
-archdatadir. Architecture-dependent data is everything that contains
machine code (e.g., plugins) as well as anything that hardcodes
build-specific data, like qconfig.pri and qmodule.pri. That is:
QML imports: $archdatadir/imports (includes plugins)
Qt plugins: $archdatadir/plugins (machine code)
Mkspecs: $archdatadir/mkspecs (build-specific)
Architecture-independent Qt data defaults now to something under
-datadir. This option existed in Qt 4, but did not differentiate between
arch-dependent and independent. Following Autoconf's lead, --datadir is
the *independent* data root.
translations: $datadir/translations (.qm files are arch-independent)
docs: $datadir/doc
By default, both new options are equal to the Qt install prefix.
(Strictly speaking, for complete Autoconf compatibility, we'd need a
--datarootdir=$prefix/share, --datadir=$datarootdir/qt5 and
--docdir=$datarootdir/doc/qt5, but that's just nitpicking and
unnecessary)
Change-Id: I39c886a6a2d2d2c0b11923c50974179e21f2af76
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
the only thing -no-prefix-install did was changing the install path
defaults on mac. and the result didn't work particularly well.
Change-Id: Iadd0f4b494b6920b595e184f858ef810f5222b0c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This has (and still does) caused lots of grief since
it means accessibility was often unintendedly not built.
Instead copy the lib-at-spi-2 header file needed for the
type enum and build it by default again.
Change-Id: I1ba26f20edff1aeb444c96a37928f36230ac7576
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Some of the xcb- libraries we depend upon are not (yet) common across
distributions. This is problematic for binaries that should be working
on different distributions. The patch mitigates this by:
Adding the files from
libxcb-proto (version 0.1.6), compiled with libxcb-1.5
xcb-util (version 0.3.9)
xcb-util-image (version 0.3.9)
xcb-util-keysyms (version 0.3.9)
xcb-util-renderutil (version 0.3.8)
xcb-util-wm (version 0.3.9)
from xcb.freedesktop.org/dist to src/3rdparty/xcb.
Adding a configure option '-qt-xcb' to use the sources instead of
linking to the respective runtime libraries.
Task-number: QTBUG-27803
Change-Id: I6ea87daa382871b2b9072a601511523fa0b9f44b
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
By not making this a compile time decision we ensure forward
compatibility for older xcb versions if the xcb plugin is built against
a newer xcb.
Change-Id: I744777d53bf7b8deb6eff372494f4403d19d364c
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
we now have qt_build_config.prf which can contain static code.
Change-Id: I3f0ae142fdc5ffb4e1d25e628e809ba15b5f0ac4
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the function is automatically performed by debug_and_release.prf,
regardless what we do with this flag.
Change-Id: Iddec69b35e0e905fdf4133ee240af37d3a8ada0b
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
so they are uniformly available to all modules.
Change-Id: I734f703c5923c42cb26f1456ed960cecc01c4b41
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
instead of symlinking (on unix) or creating a forwarding spec (on
windows), just put the default specs into (the bootstrapped)
QLibraryInfo.
Change-Id: I595500ef7399f77cb8ec117c4303bc0a2ffe505f
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This option is opt-in (default: no). When configured with
"-proxies-system-default", Qt automatically picks up the system
proxies.
Change-Id: I8cc002f29587854f448d97117b08c43d8eedec76
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
We forcibly overwrite the symlink - in case the source dir changes.
Change-Id: I3986b968f787ea0d250887113a0c223e10038546
Reviewed-by: Martin Smith <martin.smith@digia.com>
The new 'prepare_docs' CONFIG option triggers the documentation rules in
default_post to generate two extra targets: prepare_docs and generate_docs.
The prepare_docs stage runs qdoc with the -prepare option, which means qdoc
will only generate index files, and the generate_docs stage will call
qdoc with -generate, which reads the index files and generates the final
output. The regular docs target will then run the prepare_docs target
for all submodules before running the generate_docs target.
This ensures that when generating the final output, qdoc has all the
index files for all the other modules available, to be able to resolve
cross-references between the various Qt modules.
This patch needs a follow-up in qt5.git to add CONFIG+=prepare_docs, so
that the root Qt5 build will be able to hook into this new behavior.
Change-Id: I654d7f0d4d5a41d9be208e6d3a8923bf0194f9ad
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
We forcibly overwrite the symlink - in case the source dir changes.
Change-Id: I3986b968f787ea0d250887113a0c223e10038546
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
We have a new style Fusion that will replace these styles.
They will be moved to a separate
module rather than included in platforms that do not need them.
Change-Id: I51ebbcad5406e99130e5b12e62ba624d1489088c
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
... so we can test those functions with host and cross compilers.
Change-Id: Ifebfdac54580633c797f77b139514cf9d66edd8c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
It's actually looking for the mkspecs (so it can read qconfig.pri to
get the Qt version), so give it exactly what it wants.
Change-Id: I2957b2d93a8837b8492d313209d45ff3ec01704c
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This is a new non-native style for Qt.
It is intended as a replacement for the now aging
Plastique and Cleanlooks styles.
Change-Id: I30c0518a69e4e3b8b2b05ee7d84c3a5a1f307578
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
that way we don't have to auto-generate code for that in the configures.
note that we now load qt_build_config.prf instead of just qmodule.pri,
which means that exceptions_off is set everywhere. we forcibly re-enable
them for testcases to minimize the deviation from default 3rd party usage.
testlib selftests are not qt testcases, so the one that needs exceptions
needs to enable them explicitly.
Change-Id: I1b9360bb11f2e80c92a2b63a7c45991ad17fda1b
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
These options were only used for QWS in 4.x, and their documentation
should have been removed as part of f220f99a6d.
Task-number: QTBUG-27369
Change-Id: Ia85a20bdac40087c02f6876f53ce21568759d697
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Task-number: QTBUG-26140
Change-Id: Ifee00a9d15b053bb9d2c7b0d9bedca45e4d589d3
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
qdocconf files can now reference $QT_INSTALL_DOCS to pick up e.g. global
includes, instead of using relative paths. Qt modules will automatically
get a doc target that builds and installs into the right place (including
supporting shadow-builds) if they set QMAKE_DOCS before loading(qt_module).
Change-Id: Ia408385199e56e3ead0afa45645a059d1a8b0d48
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
GTK_WIDGET_TOPLEVEL was deprecated in 2.20 and no longer available in
gtk 3. gtk_widget_is_toplevel() was introduced as a replacement in gtk
2.18 => make that the minimum requirement.
Change-Id: Ie5d2d8bd824af916a9764c66a7046f07a77b1748
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
Change-Id: Id0137400f18c8dfe7be7ca44670c16615401d424
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Peter Hartmann <phartmann@rim.com>
stack-protector-strong gives performance benefits over
stack-protector-all and is still checking more than -stack-protector,
so seems to be a good middle way and we want to use it when it is
there.
The -shared option for the compiler (not the linker) prevents a
RIM internal version of qcc from forcing -fPIE, and should not harm
in general when set.
In addition, add a method "compilerSupportsFlag" for Windows as is
present in the Unix configure script.
Change-Id: Iba300e9cb82f34043e7b36f8e45287a1aed2a1a5
Original-patch-by: Greg Bentz
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
The default is the current behaviour: strip on installing release, no
strip on installing debug. This option does not change the
installation of debug builds because qmake does not support that.
Change-Id: Ic208d5ffe860d5f1ee1cafdc944e12001673d33f
Reviewed-by: Davide Pesavento <davidepesa@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Change copyrights and license headers from Nokia to Digia
Change-Id: If1cc974286d29fd01ec6c19dd4719a67f4c3f00e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
When qmake is used to get PKG_CONFIG, core and gui are not
available. This motivates CONFIG-=qt. In fact, we don't need any
features for this job.
Change-Id: Id247054d43c50f6aeb62db7585c3e90f57aa36a1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The value of PKG_CONFIG might depend on device options.
For example, "-device-option PKG_CONFIG" might be used with configure
or a mkspec might prefix PKG_CONFIG with CROSS_COMPILE which is
specified as a device option.
The shell functions of configure for parsing mkspecs do not take
device options into account, but qmake is pretty good at it now.
Change-Id: I1c9558e550c48e8441ebdac34b82066473c2ce3a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
It is necessary to use the n9 device file for now in scratchbox or/and on the
community open build service because the maemo platform mkspecs file assumes
that a cross-toolchain is used all the time. If no platform file is used, then
for instance certain plugins may not be built in general. There is currently an
ongoing issue with the meego plugin for context management in the Harmattan
components project. That is currently not built due to this issue, so no
orientation works in those applications.
The nice solution would be to make the maemo platform file work with cross and
native toolchains as well, but that requires a decent amount of investigation
and work. Thereby, the scope is extended this way for now.
Change-Id: I172c7d152bdbb2db279526d9fd1ca5648d0cd0a9
Reviewed-by: Simon Hausmann <simon.hausmann@nokia.com>
Also check for c++11 support in configure.exe (which is also used by MinGW builds).
The c++11 check is therefore moved from 'unix' to 'common' directory.
Change-Id: I082848f032c2770e52e34f331b83820f395c06b6
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Yuchen Deng <loaden@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This partially reverts commit
07a978d3d4.
Despite what the commit message said, pkg-config previously worked
and was useful, particularly for static Qt. Qt itself even installs
its own .pc files.
Note: The mkspec win32-g++-cross had a PKG_CONFIG definition to avoid
using the pkg-config installation on the build machine.
Change-Id: Ia4a8d18cd57f74a00bdb9b6a171d20151978a9cc
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Peter Kümmel <syntheticpp@gmx.net>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
the bootstrap does not need CamelCase includes, deprecated headers and
whatnot, so just don't do it. the full thing will be run on qtbase by
qmake.
Change-Id: Idffdd4750a73574c8c32ee75d00080abfe37e03c
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
... provided perl is available.
configure.exe already does that, and there is no reason not to.
Change-Id: If398864697fcfbe4545248cec33e70a1ec4a29a3
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
it needs no special env variables any more
Change-Id: I60a7ab6eabb9280b02cd510418c0842d05fc1306
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this is where the syncqt calls for all modules happen
Change-Id: I544e5fa6950c2babe56d78f5543d2c3262016687
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
DEPENDPATH is hard to get right, and consequently most projects have
broken dependencies.
the easy way out is just adding everying in INCLUDEPATH to DEPENDPATH,
like we do ourselves in qt. if somebody wants to optimize, he can
opt-out.
Change-Id: I7fb56010728fd2b0d2b7d4d26386f366d414ba04
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
And only use the QT_CONFIG,egl syntax in eglconvenience
Change-Id: I81c0602334714f4b27a7e90e7b5859c989e6bd63
Reviewed-by: Paul Olav Tvete <paul.tvete@nokia.com>
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
The Mac OS X SDK is the only thing that variable is
used for, so give it a name that better fits its use.
Change-Id: Ifd9866bc19edda0e9f0bcb17270eb26a8849401e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Not every MIPS SoC has the DSP extensions, auto-detect them by using
builtin GCC functions. Check for the DSP macros and add the result
for rev1 and rev2 to the cpufeatures.
Change-Id: I3d6c950f170f102514c43b349f9a23ee796d801a
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The XCB platform plugin requires several XCB libraries to work. Without
this fix, we get the build error in compileTest only, which is hard to
check.
Change-Id: I6b599f5ad32661e9dc01db11705d702920350cfa
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
standard paths should never be added to compiler/linker lines, as they
are likely to mess up the lookup order.
pkg-config does that filtering for us, but the home-grown config tools
don't, so we need to take care of it.
configure.exe does not have such auto-detection, so the change is not
necessary there.
Task-number: QTBUG-26850
Change-Id: I2f523d5cffb27c3d0a16cdef6ca8a4877c9983c0
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Reviewed-by: Mitch Curtis <mitch.curtis@nokia.com>
Reviewed-by: Jørgen Lind <jorgen.lind@nokia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
This reduces dramatically the command-line for compiling Qt sources.
These are private macros, only to be used by Qt's own modules, so the
compiler setting is either the same or, possibly, better. In other
words, in the worst case, when compiling a module with a better
compiler than for qtbase, such module might not enable all the
functionality it could otherwise do.
If we switch to a buildsystem that can support this properly in the
future, these macros should be removed.
Change-Id: I71f2d12ec98c9dd40eaab9de4a17446bd1066020
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
hard-coding it in unix.conf was no particularly good idea for hopefully
obvious reasons.
the windows version is so far just a stub that does what the makespecs
hard-coded - more doesn't seem worth the effort. the guys interested in
x-building may want to rectify it at some point, but it's not going to
be easy.
Change-Id: I8fedd841a8416f8c0c57018752eae9510b5d00d0
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This is prompted by the fact that QMAKE_LIBDIR_FLAGS is no longer
honoured by qmake, so we need to use LIBS. It didn't make much sense
to have the flags separate anyway...
Change-Id: Iaec4d58f9dbac25755bbc3bad7550e03edb5332b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
this cuts down the enormous duplication of identical command line args
passed to compile.test.
this necessitates the addition of a -config parameter to compile.test,
as QMAKE_CONFIG needs to be extended in some cases.
Change-Id: I677b2fea4a407b9e4395e70a25e4e349efb0a946
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is a plugin that bridges the QAccessible world
to AT-SPI 2 on Linux.
Change-Id: I7af22621ee6a3cefc723b137b7f227a611cf6641
Reviewed-by: Jan-Arve Sæther <jan-arve.saether@nokia.com>
a module's project file may set MODULE_INSTALL_LIBS before loading
qt_module.prf to have an alternative RPATH linked into the users of that
module.
this is relevant only for linking against non-installed -prefix builds
of that module, as otherwise .libs from the module's pri file is used
for rpath.
Change-Id: Ib240e748cf130a71a5991dc643c368a983092ead
Reviewed-by: Simon Hausmann <simon.hausmann@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
This fixes a build failure that happens when Qt is configured with
-no-libudev, as reported at https://bugs.gentoo.org/show_bug.cgi?id=430292
Change-Id: I924f023505ab57cca5994f2fd5ff2f8308e61617
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
When using [ ] for tests in shell scripts, the ending ] must be a
separate parameter. Otherwise, it won't work. configure was reporting:
configure:5918: ']' expected
Change-Id: I38a843356ee0feb97edb8692a828306821045c77
Reviewed-by: Laszlo Papp <lpapp@kde.org>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
configure will now run qmake without -recursive, as on modern systems
one can get a lot more out of parallelization done by make, which qmake
cannot do.
use -fully-process to get back the old behavior. -dont-process is
unchanged.
Change-Id: I2874321a963175463ae8992f3ab2b01bc13c9922
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
they are an unreadable and unmaintainable mess. the options are properly
documented below.
Change-Id: If2ec683fb7c3740b19798979f8a1f9cd8d84f457
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This option is important if you want to use configure's
and qmake's -sysroot (e.g. PKG_CONFIG settings, device-files),
but the toolchain (in combination with the rootfs)
is not able to handle gcc's --sysroot.
One known case is freescale's ltib setup where the toolchain
itself comes with all the essential files (e.g. crt1.o),
while the rootfs has none of those files, so gcc's
--sysroot can't be used. The rootfs on the other hand contains
all kinds of "less important" files/packages (e.g. libdbus).
For those "less important" files/packages Qt needs pkg-config
to be able to include/link properly. Therefore one needs
configures -sysroot without gcc's --sysroot.
Change-Id: Iaec9b07012f2945f3ecb3ced0ed95176721b5ecd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The arch.test script is now using SDK settings passed to it.
If you install Xcode without the "UNIX Development" option, this
is essential to let the compiler find standard headers and let
the test program compile successfully.
In addition, let configure pass the SDK settings given on the
command line to the arch.test script.
Change-Id: I49601d3068d83a71e21fdbac287857f2b7abedd1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In systems where no pkgconfig is available, such as QNX, we set
QT_LFLAGS_SQLITE to the default values.
Change-Id: I24edd589ce7baf2614480a91842ca756ead39463
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The code is exactly the same as what is already done for DirectFB.
Change-Id: I3b84e67a3e999f692da4110f3ac9c82d98b0637c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Tools for each module should be enabled by default.
Prior to qt_parts.prf, they have been enabled by default, but only by
accident - the value of QT_BUILD_PARTS with respect to 'tools' was
generally not respected.
Change-Id: Icd49d6128d4050ff1c865967a563e9ab88c5a3a2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
that way it is actually possible to add additional parts from the qmake
command line.
Change-Id: I42e0b58424292cebafb57538a879204d370397bb
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
otherwise we get lots of nasty warning messages about missing pri files.
it is arguable whether it is a good idea to do that, but we preserve
mkspecs/modules, too, and the previously built libraries don't just
vanish, either.
Change-Id: Ieded8d8858f1b0135bc3bea894b4a676024ac8ca
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
this makes it unnecessary to dump qmakespec to .qmake.cache and
qmodule.pri.
Task-number: QTBUG-22700
Change-Id: I678c7ee7df2512184b9cd06d7a3be8bbd0b0da15
Reviewed-by: Orgad Shaneh <orgads@gmail.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
modules other than qtbase also need it.
the windows configure already does it that way.
Change-Id: I9adb469f7a0726663b7939e80d8be1e83a6d12d3
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
this will fail now even on unix (and wouldn't have ever worked on
windows), as the full spec name is known only after reading the spec,
and qconfig.pri is read from inside the spec.
matching on the host_build flag is cleaner anyway.
Change-Id: I7da144e89ab3db0fad942d755d8cb0a0f3b85588
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Donald Carr <sirspudd@gmail.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
pkg-config returns glesv2 build flags, which are parsed into a few
variables. However, extra spaces get included in these variables and
quoted, which makes includes paths not work.
This problem can only be hit, if you do not have GL ES 2 headers
installed system-wide, but you do have installed into $prefix, and
pkg-config configured to return the configuration for $prefix. Even
though pkg-config returns correct paths, extra space gets included.
Fix it by parsing the strings returned by pkg-config just like a shell
would parse a command line. pkg-config escapes e.g. spaces, so those
escape sequences need to be interpreted, while doing word-splitting. The
result is a quoted list, as expected in the qmake files.
Done-with: Pekka Paalanen <ppaalanen@gmail.com>
Change-Id: I0593ef7e0606ac5ea80da046e45f86806206951a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The SXE feature was used with Qtopia but is long gone. Clean it up.
Change-Id: I55fba97b6382300ba63e94f3a6c415227f571e37
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The Maemo-specific function have been renamed a bit to prevent them
clashing with the more generic stuff.
Task-number: QTBUG-25865
Change-Id: Id55693159e15d5a0c679546eb48308feb48acac9
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Up until now, we had a mess of different macros used for building
DLLs, for building shared libraries on Unix systems and for building
static libraries. Some of the macros were contradictory and did not
work. From now on, there shall be only:
- QT_STATIC: indicates that it's a static Qt build and the export
macros should expand to empty
- QT_SHARED: indicates that it's a shared / dynamic Qt build and the
export macros should expand to Q_DECL_EXPORT or Q_DECL_IMPORT,
depending on whether the macro corresponds to the current module
being built (the QT_BUILD_XXXX_LIB macro comes from the module's
.pro file)
QT_BOOTSTRAPPED implies QT_STATIC since the bootstrapped tools link
statically to some source code.
QT_STATIC is recorded in qconfig.h by configure when Qt is configured
for static builds. Nothing is recorded for a shared / dynamic build,
so QT_SHARED is implied if nothing is defined. This allows for the
existence of a static_and_shared build: with nothing recorded,
defining QT_STATIC before qglobal.h causes the export macros to be
that of the static form. Linking to the static libraries is out of the
scope of this change (something for the buildsystem and linker to
figure out).
From this commit on, the proper way of declaring the export macros for
a module called QtFoo is:
#ifndef QT_STATIC
# ifdef QT_BUILD_FOO_LIB
# define Q_FOO_EXPORT Q_DECL_EXPORT
# else
# define Q_FOO_EXPORT Q_DECL_IMPORT
# endif
#else
# define Q_FOO_EXPORT
#endif
The type of the Qt build is recorded in QT_CONFIG (in qconfig.pri) so
all Qt modules build by default the same type of library. The keywords
are "static" and "shared", used in both QT_CONFIG and CONFIG. The
previous keyword of "staticlib" is deprecated and should not be used.
Discussed-on: http://lists.qt-project.org/pipermail/development/2012-April/003172.html
Change-Id: I127896607794795b681c98d08467efd8af49bcf3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
they are equivalent to QT_INSTALL_(HEADERS|LIBS)/get.
Change-Id: Ic4b47f3ca7db55785b96f19020a2fa020a8d25bd
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
properties are now split into a write location $$[FOO] and a read
location $$[FOO/get]. the write locations are hard-coded and configurable
via qt.conf/Paths as before, while the read locations are configured via
qt.conf/EffectivePaths.
this finally provides a clean solution to the problem that during the qt
build itself tools and libraries need to be taken from somewhere else
than they are installed to.
Change-Id: I956c43bd082afd465e690fe75d0bee3c2c0f7c25
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
it only serves to create merge conflicts. the treatment is the same as
for "unclassified" options anyway (they ignore the value, so it can be
"yes" just as well).
Change-Id: I9a75769338b4dc1f58493f1a1f1dd2c2e895290a
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
we now simply call qmake -r, which is also what we do under windows.
-fast mode is retained for examples and tests, though with moderately
modified semantics (i couldn't be bothered to decipher what the old ones
were supposed to be).
Change-Id: Id2c2d2bed9c8d52ac42f31b388bffc34f4649650
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
don't mess with the qmake cmdline args any more.
Change-Id: I399d87145d31d25e29951b6acd96387a3c7282f0
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
when qmake runs into the new option(host_build) command, it will restart
the project evaluation with a host spec.
the new default host spec is called default-host (gasp!). it is
overridden with the pre-exising -spec / -platform option, while the new
-xspec / -xplatform option overrides the pre-existing default spec.
specifying -spec but not -xspec will set the xspec, too, so the behavior
is backwards-compatible. same for the XQMAKESPEC override read from
.qmake.cache and the environment variable.
the cleaner solution would be adding -hostspec, to be symmetrical with
the override semantics, but that would deviate from configure in turn.
Change-Id: I4297c873780af16ab7928421b434ce0f1d3820da
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
This solved QTBUG-26111 in which qtjsbackend gets built with an
incomplete framework on Mac OSX. This was traced back to commit
6a6fd56e66 which moved QMAKE_CONFIG
values from .qmake.cache to mkspecs/qmodule.pri. Since qtjsbackend
contains config tests it creates its own .qmake.cache which was
previously masking this issue.
QMAKE_CONFIG incorrectly contained debug for debug_and_release builds
even though debug and release are already present in the CONFIG variable
in mkspecs/qconfig.pri. The changes to configure prevent CONFIG in
qmodule.pri from containing debug and release variables and ensure
that QT_CONFIG contains build_all and debug_and_release if appropriate.
Configure.app is also adjusted to match this behaviour.
The other part of the change is to qt_module_config.prf and
qt_plugin.prf. These changes take care of populating CONFIG with
the appropriate debug_and_release and build_all variables depending
upon what is present in QT_CONFIG. This ensures that the Qt modules
and plugins get built with the same configuration as qtbase.
The special handling for the qcocoa QPA plugin ensures that it is
built in release mode only to preserve the behaviour introduced by
commit 5603f94eaa.
Task-number: QTBUG-26111
Change-Id: I6f65aba50709e1b2431b8b4411ff30a06f7d8aed
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
$VAL just happens to work in resolveDeviceMkspec because it is
set in the parent shell environment when the function is called.
Change-Id: I67350f2a9e790cc7eca2a73ef6a4a0d7f09b8d3c
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Follow-up to 0074cc5d34.
The configure script can be used for cross-building for Windows on
unix.
Change-Id: Ie7f9d0ff308ad5763cdf7b2664fa255e89bd5013
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
This is the first step in supporting these checks on Windows.
Change-Id: I77cfd46bd733161ad2e52c2f76a6354b95ff737d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This allows us to have different flags for the compilers for
supporting the same feature. For example, the official flag in GCC to
support AVX2 is -mavx2, but ICC does not support it (yet), requiring
-march=core-avx2 or -xCORE-AVX2. That flag, instead, enables support
for all the features that the "Core-AVX2" processor (codename Haswell)
will support. And clearly, the MSVC flags are different.
Change-Id: I33b6d8617520925e807747180a8dbaafd79b7a9a
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
PLATFORMS is unused. Also remove the loop that printed all the
PLATFORMS when the mkspec couldn't be autodetected. Even if the
PLATFORMS variable was moved up, it wouldn't work anyway since
it detects files and not directories.
Change-Id: Id483c431a179fb01fcf680538e28c81763bc0b90
Reviewed-by: Donald Carr <donald.carr@nokia.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
EGLFS has a hard dependency on evdev, so don't compile it when
evdev is not present.
This also removes the check that disabled EGLFS specifically for QNX.
Since QNX doesn't have evdev, EGLFS will get disabled automatically.
Change-Id: I9fdb364b2eff9b370fa238609a8f98af6ccb7f7b
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
XPLATFORM_QNX was never explicitly set, yet the tests which evaluate it
assume that it is.
Change-Id: If97d2ee1f4432ada0c68e36348bf5bec85f94e43
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Commit 2a1b50d67c introduced a dependency
on evdev for eglfs which QNX does not provide. QNX also has a dedicated
QPA plugin so the eglfs plugin is not needed there.
It is not possible to use the -device configure defaults approach as
it is not cross-platform.
Change-Id: I2d151f16cf1a9576a0b0b528f0e9c17834c66e91
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Enabling support for C++11 adds CONFIG+=c++11 to the Qt build. Projects
using Qt can check for C++11 support using contains(QT_CONFIG, c++11) in
their .pr[iof] files.
The QMAKE_CXXFLAGS_CXX11 and QMAKE_LFLAGS_CXX11 qmake varibles contain
any arguments the compiler needs to enable C++11. CONFIG+=c++11 adds
these arguments to the build.
Support for clang, g++, and the Intel C++ Compiler for Linux are
included in this commit.
Change-Id: Id77f86d7ad4d5c740b890446a40b105879a0d327
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Fontconfig has no X11 dependency and is of broader use to us than the X11
context. The test should also disambiguate whether fontconfig support is
successfully detected or not.
This change also removes a false X11 dependency from the freetype test.
Change-Id: I68a596aa06f614a64163772fe29a09edba119a81
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
This information is required by qmake when cross compiling for Debian based
multi-arch devices in order to adequately resolve system libraries and
pkg-config information.
Change-Id: If96e677ab27c6f0453889c8f7cc43bdb9016f8b6
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
this is needed to correctly resolve the compiler (cf. $$CROSS_COMPILE)
Change-Id: Iaf7266ae464c15e8483780dcf9c970212630a93b
Reviewed-by: Donald Carr <donald.carr@nokia.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Reviewed-by: Johannes Zellner <johannes.zellner@nokia.com>
We already do this for -I and -L compiler flags, but not -D.
This caused configure tests to give incorrect results in some cases.
Task-number: QTBUG-25963
Task-number: QTQAINFRA-523
Change-Id: Ib270a1dc67759e36bc439e80ab8136a64c405d26
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Reviewed-by: Donald Carr <donald.carr@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Instead of saving the ability of the compiler to produce SSE2, AVX,
Neon, etc. code in .qmake.cache (Unix) or qconfig.pri (Windows), move
everything to qmodule.pri. Accordingly, move the DEFINES += settings
to qt_module.prf instead of qt.prf.
This allows us to re-use these settings in other Qt modules (other
than qtbase), if necessary. Though currently the extra compiler
definitions are found only in src/gui/gui.pro. They can be moved
elsewhere when it becomes necessary.
As a side-effect of this change, some other flags are moved from
.qmake.cache to qmodule.pri (on Unix). The flags that are getting
moved should probably be moved anyway.
Change-Id: Ibc3ab0111e148d81870772f9357273660aa93417
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The configure script uses the bash $"..." string internationalization
syntax; this generates an error in other shells.
Since this feature is only used in one place it is likely a typo.
Change-Id: I076a785c3901b04175b8669e32c55989385720e3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
If the system's compiler has extra features on top of the base
settings enabled or if the mkspec or $CXXFLAGS variable included some,
record them.
This will allow us to choose whether or not to use our own special
compilers, based on whether the system default compiler contains it or
not.
Change-Id: I87cada9fab4cfa58846a831d0a7c7b50d8fa87fd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
For the Unix part, this now obeys the -v option, printing the full
command-line it used to compile, allowing testers to identify why
something went wrong.
Unfortunately, it requires a full compilation cycle, instead of just
preprocessing. Just one more among the many on Unix, but maybe a
noticeable slow-down on Windows.
Change-Id: I654b70d99887e04c96731a5b91be9ad555e4d8fe
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
sometimes it pays off to actually check where variables are used ...
Change-Id: Ia91c89cb963ace50f432c54ffe5f57366ccd5603
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Simon Hausmann <simon.hausmann@nokia.com>
Qt's configure allows for spaces between an option and its
argument. This patch brings -l in line with -L et al.
Change-Id: Iea5c78dc06f69c21b7419fd9fa73c52ae1cea18f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
result was never returned by resolveDeviceMkspec
Change-Id: Ibd2f647e5524cdc9dbf4ea06f7b815f9dcc43212
Reviewed-by: Andy Nichols <andy.nichols@nokia.com>
Specifying -device linux-amlogic-8726M-g++ is error prone. With this
change, one can specify any substring of the mkspec names under
devices/ and the first one will be picked.
Change-Id: I7c4522fdaefe4a11e9292f7831075aa766a62c0b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
In at least one case found in our testfarm, the compiler runs into an
ICE (Internal Compiler Error) compiling the new AVX code. The error it
reported was:
fatal error: error in backend: Cannot select: 0x7fbf1aa42210: f64 = sint_to_fp 0x7fbf1aa88a10 [ORD=1936] [ID=37]
0x7fbf1aa88a10: i32,ch = CopyFromReg 0x7fbf19538768, 0x7fbf1a9f2610 [ORD=1936] [ID=27]
0x7fbf1a9f2610: i32 = Register %vreg38 [ORD=1936] [ID=9]
As is the nature of ICEs, juggling the code around will probably make
it pass. But since I have plenty more AVX changes pending, which make
the code even more complex, it's also very likely that this issue will
happen in other places. For that reason, I choose to blacklist the
compiler instead.
Change-Id: Ide3201f0cc49c7ceb63e966f6de65a8315cbea4b
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
This significantly reduces the size of the generated code
in places where we don't need exceptions.
The -(no-)exceptions configure flag has been removed in the
process, as there is now a fine grained way to control this
on a per module level, and Qt is being compiled without
exceptions in most places.
Change-Id: I99a15c5d03339db1fbffd4987935d0d671cdbc32
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Store PKG_CONFIG_SYSROOT_DIR and PKG_CONFIG_LIBDIR for the usecase of
cross compilation in qconfig.pri. They will get picked up by
pkgConfigExecutable() in qt_functions.prf used from link_pkgconfig.prf
as environment for pkg-config calls.
Change-Id: I7d0de05c0bd21b435275fc26c66a80035ba30970
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Modern versions of Xcode properly support dwarf2, and as such dwarf2 is
always enabled. This change removes the ability to turn it off, making
dwarf2 non-optional.
Change-Id: I149daeae6048ee8a1ed116363572173ad219102e
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Mostly straightforward porting: Add configure test from Qt 4. Add X11
include to qgtkstyle_p.cpp. Use renamed QGuiApplicationPrivate::showModalWindow.
Change-Id: I83020e13ec00b49f3fe346814f881bce19a6f602
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Let configure generate the QT_QPA_DEFAULT_PLATFORM_NAME in
qconfig.h. This allows us to override the platform name
using a configure argument.
This commit adds -qpa <platform> that lets the user specify
the default platform at configure time. Note that the default
platform is not checked against the tree since plugins are
allowed to exist outside the Qt source tree.
In the absence of -qpa argument, configure checks the mkspec
for a variable named QT_QPA_DEFAULT_PLATFORM. This check is
implemented only in the unix configure because it will be primarily
used in custom mkspecs (devices, boards).
If -qpa argument is absent and the mkspec variable is absent,
the default value is determined based on the OS as below:
Unix - "xcb"
Windows - "windows"
Mac - "cocoa"
QNX - "qnx"
Done-with: Jørgen Lind
Change-Id: I0df31811a1b901a3242bfada1232e596ebda04f4
Reviewed-by: Donald Carr <donald.carr@nokia.com>
Reviewed-by: Jørgen Lind <jorgen.lind@nokia.com>
The build tree is not initialized when -help is passed to configure.
The mkspecs/ directory is not created and thus the mv fails results
with the following error:
mv: cannot move `.device.vars' to `/tmp/qtbase/mkspecs/qdevice.pri': No such file or directory
The solution is to create qdevice.pri just before we run config.tests.
Change-Id: Ie83018e27a03bb840d213aae8c963b0074e62bb4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Some versions of the DirectFB headers are unclean and will cause Qt
compilation failures. So blacklist those versions. Version 1.5.3
(present in Fedora 16) is known to be buggy and gets disabled by this
patch.
The compile error was:
qurlquery.h:169:5: error: ‘typeof’ was not declared in this scope
(qplatformcursor_qpa.h includes qevent.h which includes qurl.h which
includes that)
The error comes from the Q_FOREACH expansion. Note that Q_FOREACH uses
__typeof__, so it's supposed to be safe, unless someone ill-advised
goes and defines the GCC "safe" macro (double underscores on both
sides) to something else.
Change-Id: Ida41ee3b3c2fcba86a7e12182e7055123166693b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The include files have a hard dependency on OpenGL (ES2); testing for the
presence of EGL support is insufficient grounds for including this
functionality
Change-Id: I391b5dbbcbef40ecf68d16617b6eb1c0bb4b799e
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Instead of having to pass -no-xcb -no-eglfs -no-directfb, it's
better to pass -no-qpa-platform-guard which is also resilient
against future platform additions.
Change-Id: Id68bfe3688980fa273665b01b9332f5d6f359491
Reviewed-by: Jørgen Lind <jorgen.lind@nokia.com>
Reviewed-by: Donald Carr <donald.carr@nokia.com>
Add DirectFB buildsystem integration by adding a configure target
and adding it as subdirectory to the project file. The default is
to automatically build directfb. Update the Broadcom/9425 build.
Change-Id: I482f865cebd9d5cd4c98c184773f8534f92db9df
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Currently, for host builds, pkg-config usage is autodetected based
on it's availability in the mkspec or the PATH. For xcompile builds,
pkg-config is disabled unless -force-pkg-config is passed.
-force-pkg-config is poorly named since it doesn't reflect the fact
that it applies only to xplatform builds. It is in fact the only way to
enable pkg-config in xcompile builds. And when passed, it doesn't actually
force anything since all it does is check env variables. To add to the
confusion, it prints a warning even if the env variables are setup correctly.
This patch remedies the situation. It adds (-no)-pkg-config. The flag works
for both host and xcompile builds.
By default, the value is 'auto'. In this mode, it will try try to detect pkg-config
from the path. If found, it will be used. For xcompiled builds, we use some heuristics
to determine if the pkg-config is actually usable:
1. if -sysroot is not set and the environment variables PKG_CONFIG_LIBDIR or
PKG_CONFIG_SYSROOT_DIR are not set, we disable pkg-config.
2. if -sysroot is set, then we setup PKG_CONFIG_LIBDIR and PKG_CONFIG_SYSROOT_DIR
automatically (provided $SYSROOT/usr/lib/pkgconfig exists).
If the value is 'yes', configure will error if it's heuristics fail to detect a usable
pkg-config.
If the value is 'no', pkg-config usage is disabled.
If the value is 'force', configure will skip it's heuristics and use pkg-config anyway.
This mode is useful, for example, when compiling for 32-bit on 64-bit systems.
This change also removes references to PKG_CONFIG_SYSROOT (PKG_CONFIG_SYSROOT_DIR
is the correct environment variable).
Change-Id: I07fc8d48603c65a60de0336fc6276e90fcb41430
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Scrolling the configure output to locate the build configuration
is painful. So save it in config.summary.
Change-Id: I40a2f7628e9a2b91a8ea44619dd49c00d5a61561
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The configure script currently automatically assumes that if you are cross
compiling, we should avoid trying to generate and strip separate debug
information due to toolchain limitations.
Historically there may have been good grounds for this, but it seems like
an aggressively pessimistic assumption which ignores the
standardization/advancement of embedded toolchains as a whole.
This assumption also extends to host compilers which deviate from the
automatically detected "platform" compiler, such as Clang.
Change-Id: Ifed2750325178bb5291d8ca1dde92925bfa36065
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Since the library and almost everything got renamed to qml, we
should do so for the debugging support, too.
(CONFIG+=declarative_debug will continue to work for some time
being, but prints a deprecated warning).
Change-Id: I295155dce873e2585c1452d2bf0625ea6ce219c4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
configure parses the compiler from the mkspecs using an awk script.
The detected compiler is then used to determine sysroot support.
The awk script is currently unable to handle loading of qmake
features and thus configure will not detect the compiler correctly.
This is the case when using device profiles. The qdevice.pri is loaded
through the qmake feature file device_config.prf.
One possible way to fix this is to move this detection after qmake is
built and make this a .pro based config.test. However, this cannot be done
because the sysroot is actually baked into the qmake binary as the
QT_SYSROOT variable.
The solution is to remove this check completely and let the build fail
when Qt starts compiling with --sysroot.
Change-Id: I6c3b7ec2c8e5e390d6f5b1e602d656682d610b98
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
-sysroot has been undocumented so far.
Change-Id: I552f9233778de9490a3479292f0cda9c8c439282
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Developers who are building & rebuilding Qt often end up needing to
recompile all other modules because of this removal even though the
libs are still compatible.
Change-Id: I4ec0e8ab222675dcd2a3f3a2b5e931c1c7f31f69
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
EGL support in src/platformsupport/eglconvenience requires OpenGL ES
to be enabled, so it makes no sense to test for the presence of EGL if
we're not enabling OpenGL ES.
EGLFS has similar requirements, so ensure it gets disabled
too. Otherwise we're going to get lots of undefined symbols in the
EGLFS plugin to things in QtPlatformSupport that did not get compiled
in either.
Change-Id: Ie55dd2e2597ec0594aa589ee8aac150c71104b46
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
PLATFORM_QPA is always true
PLATFORM_X11 is always false
remove/collapse all related conditional statements to lend greater clarity
to the configure script
Change-Id: I4998edf5402019370333ed79effcd0cacafbe87d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This requires 'configure -make tests' if you want to automatically
build autotests for a module by default.
You can still go into the individual tests/ directories and
'qmake && make check'
to build and run the autotests.
configure -developer-build will enable the tests by default,
like it did in Qt4.
Change-Id: If4d870987de0947a8328509dcc227fa9e6284201
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
For some reference platforms and SDKs we will need to pass in
extra paths. Currently users have to modify the mkspec to adjust
paths or set environment variables that will be picked up.
This change introduces the -device <name> and -device-option
<key=value> option. The key value pairs will be written to a
qdevice.pri and can be used by the qmake.conf of the device spec.
The reason to not save the key value pairs in qconfig.pri is
becase of the fact that the device spec loads the qdevice.pri
earlier than the qconfig.pri. qdevice.pri allows the mkspec
to set the compiler flags and qconfig.pri allows configure to
add to those compiler flags.
Done-with: Holger Freyther
Change-Id: I931a197b8be72397e1eedfee09502eefc01c9d4f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Reviewed-by: Johannes Zellner <johannes.zellner@nokia.com>
Reviewed-by: Donald Carr <donald.carr@nokia.com>
This is a follow-up to comit 70a8833151.
The regular expression for CFG_HOST_ARCH was not updated in the above
commit.
Change-Id: I2baf0b42d851f1df096c2f6ad54aeec57940e661
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Intel CC 12.1 supports AVX2 but only with -march=core-avx2. The -mavx2
option produces a warning.
GCC 4.6 does not recognise any option.
GCC 4.7 recognises both -mavx2 and -march=core-avx2 so let's use the
latter for now. We may need to change to -mavx2 when there's an AMD
processor that supports AVX2 too.
Change-Id: I529240e6e6c2c0e3942d357e0320212d954fe4de
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This also removes the check for SSE, but the check for SSE2 and
further technologies is kept. If SSE2 is present, then SSE is too. We
don't have any code that uses the original SSE instructions only.
Remove the CMOV detection, since we don't use that anywhere and we're
not likely to ever use them..
Change-Id: I3faf2c555ad1c007c52a54644138902f716c1fe1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The regular expression should look for underscores in addition to
alphanumeric characters.
Change-Id: Idc3dbd67291ec1420f818d74fba8413b1e7cbcf1
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Any message/error in mkspecs or qmake feature files ends up confusing
the current arch detection logic. Instead, search for
"Project MESSAGE: .* Architecture: <arch>".
Change-Id: I308932a5b75f3a1fcbc4fe30c74faf2e83b2d752
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
config.tests/unix/freetype.pri has a !cross_compile flag, so we must
find freetype using the proper detection methods. The detection was
inside an X11 section of configure, so move that out.
And use the results of that detection, now that QMAKE_CFLAGS_X11 isn't
used (since we're not building X11 in QtPlatformSupport).
Change-Id: Ic8f5cfb7263849bfb12967756def2b5aaa244872
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The bsymbolic_functions test was missing $SYSROOT_FLAG, so the linking
was always failing and the test falsely negative.
Also make the error reporting better: if the flag was requested, error
out if the check fails and report more information in -v mode.
Change-Id: Ie2615f8083e7e58d63d9ee9c23be937dc864b30d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
With the move to the QPA architecture EGL is now only required by
individual platform plugins and the configure script has been adjusted to
reflect this.
Change-Id: Ieadacef0b970f29752d9e3e36a007e5cbb005b0d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
The XCB plugin requries libxcb >= 1.5. Configure and
config.tests/qpa/xcb now check for this.
Change-Id: I96c688b79bf5b49fd3ecc4ddc12ebdc2d3788790
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Without this, QMAKE_RPATHDIR is empty and qt_module.prf's logic to turn
on absolute_library_soname fails, causing some modules to build without
absolute paths (eg. qtjsbackend's QtV8 framework).
Change-Id: If03136ca60a5d8a96a589e2d1034e5884fd6a1ac
Reviewed-by: Michael Brasser <michael.brasser@nokia.com>
Makes no sense to disable iconv based on QPA. This change will
make iconv as the "system" codec i.e the codec used for 8-bit
locale dependent conversions.
Change-Id: I4469e9c226b2411ac1338f61dabb84ec9c2ec603
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This patch ensures that additional runpaths passed to configure via
the -R switch are added to the QMAKE_RFLAGSDIR variable.
Previously, although runpaths provided in this way were appended to the
linker options when building Qt itself, they were not appended to
the QMAKE_RFLAGSDIR value written to mkspecs/qconfig.pri. This meant
that the DT_RPATH attribute was set incorrectly in binaries built from
projects other than Qt itself.
-----------------------------------------------------------------------
Configure flags Expected value Value before this fix
-----------------------------------------------------------------------
<none> DEFAULT_RPATH DEFAULT_RPATH
-no-rpath <empty> <empty>
-R X DEFAULT_RPATH:X DEFAULT_RPATH
-no-rpath -R X X <empty>
-prefix Y Y/lib Y/lib
-prefix Y -no-rpath <empty> <empty>
-prefix Y -R X Y/lib:X Y/lib
-prefix Y -no-rpath -R X X <empty>
-----------------------------------------------------------------------
DEFAULT_RPATH = /usr/local/Qt-${QT_VERSION}/lib
Change-Id: Iaf1809b528ebd249694cf41e004173e881ca48ad
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
There should be a clear QWidget free path for people with no interest in
legacy QWidget functionality. Adding this option to configure makes this
path readily accessible and hence testable.
Change-Id: If87c1063fcf4c46f5280836126c11999feaa9f8a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Do not try to detect the host or target architectures using uname or
similar, and do not override with the -arch or -host-arch configure
arguments. The configures will still accept the -arch and -host-arch
arguments, but it ignores them and instead outputs a warning stating
that these arguments are obsolete and should not be used.
Set QT_ARCH and QT_HOST_ARCH qconfig.pri variables based on the compiler
target. This is done by running qmake (twice when cross-compiling) on
config.tests/arch/arch.pro, which preprocesses a file that contains all
knowns processors.
On Windows, configure.exe has never run any config.tests before, and
does not currently have a function to run a program and capture its
output. Use _popen() to accomplish this (as qmake does for its system()
function). This needs to be done after qmake is built, as does the
mkspecs/qconfig.pri generation. As a side effect, the configure steps
have been slightly re-ordered, but the overall result is the same. The
displayConfig() call is moved to just before generating Makefiles, so
that it can show the detected architecture(s).
Change-Id: I77666c77a93b48848f87648d08e79a42f721683f
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
When cross-compiling, check for PKG_CONFIG_LIBDIR instead of
PKG_CONFIG_PATH. pkg-config searches for pc files in PKG_CONFIG_PATH
*and* the compiled in defaults (/usr/lib/pkgconfig). This means that
pc files from the host get found when cross-compiling.
Setting PKG_CONFIG_LIBDIR makes pkg-config search only in the path
set in PKG_CONFIG_LIBDIR.
Documented in the url below:
http://www.freedesktop.org/wiki/Software/pkg-config/CrossCompileProposal
Change-Id: I22dbf29c5691572b7cb8a5fce712ae7ba811670e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Config checks are done in the module.
We pick up the pkg-config stuff also in the module. There shouldn't be a
need to do this in configure anyway
Change-Id: I9ef73760511c6b684c6cd5dd13e7e581c588e7aa
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
the feature is rather obscure and unlikely to be used by anyone.
Change-Id: I2dfb4ca4d5d1f210d385c013f46bc6389fd6ea2d
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Logic was clearly always off kilter, and this was only defined for GUI
builds
Change-Id: Ie85c156510e7c450a5192408b4c365ff07ce2029
Reviewed-by: Donald Carr <donald.carr@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
make is perfectly capable of doing shadow builds
Change-Id: I7e1c27cddc385b7a17ae5645b9cd26fa56d2f029
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
.qmake.cache is not necessarily accessible to other modules which depend on
information about whether we are cross compiling or not. We might as well
advertise this fact globally via the CONFIG variable in qconfig.pri.
Change-Id: I6dee3e6604e5ca1c775c5f9f834fe29b4e27adb8
Reviewed-by: Donald Carr <donald.carr@nokia.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Johannes Zellner <johannes.zellner@nokia.com>
this is oxymoronic: if a .qmake.cache is present, telling qmake the
project root is utterly pointless.
the windows variant never had this.
Change-Id: Iefc6e242ad7458dc699b955a3657f31f1ecf4c7b
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the tool locations are now determined with qtPrepareTool(), which takes
non-installed qt builds into account already.
Change-Id: I17b2c5f4b181417f2a612be2f540768e7dc0ae4e
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the problem this (probably) tried to solve has been solved via ordered
builds a *long* time ago.
Change-Id: I84c58076c864735eea4210ec60aa060fe3e5d97e
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
We need qdoc in qtbase to be able to properly
modularize our documentation and build it
when building the different Qt modules.
qdoc does contain a copy of the qml parser from
qmldevtools, but this is the lesser evil compared
to how we are currently forced to genereate our
docs (and the fact that no developer can run
qdoc and check the docs for their module).
Change-Id: I9f748459382a11cf5d5153d1ee611d7a5d3f4ac1
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>
Reviewed-by: Martin Smith <martin.smith@nokia.com>
Do not write Q_BYTE_ORDER to qconfig.h in the configures. Instead,
we #define Q_BYTE_ORDER in qprocessordetection.h, since many CPUs only
support a single endian format. For bi-endian processors, we set
Q_BYTE_ORDER depending on how the preprocessor sets __BYTE_ORDER__,
__BIG_ENDIAN__, or __LITTLE_ENDIAN__ (instead of using a compile test
to do so).
For operating systems that only support a single byte order, we can
check for Q_OS_* in addition to the preprocessor macros above. This is
possible because qprocessordetection.h is included by qglobal.h after
Q_OS_* and Q_CC_* detection has been done. Do this for Windows CE,
which is always little- endian according to MSDN.
Change-Id: I019a95e05252ef69895c4b38fbfa6ebfb6a943cd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
instead of being a variable added to the makespec (via qconfig.pri),
QT_SYSROOT is now a property.
the QT_INSTALL_... properties are now automatically prefixed with the
sysroot; the raw values are available as QT_RAW_INSTALL_... - this is
expected to cause the least migration effort for existing projects.
-hostprefix and the new -hostbindir & -hostdatadir now feed the new
QT_HOST_... properties.
adapted the qmake feature files and the qtbase build system accordingly.
Change-Id: Iaa9b65bc10d9fe9c4988d620c70a8ce72177f8d4
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
Remove the -armfpa option the config.tests/unix/doubleformat*
detection. The places where we used QT_ARMFPA and Q_DOUBLE_FORMAT
has been removed as well.
Rationale: ARM FPA with GCC does not work with EABI. Qt currently
does not support compiling without EABI, making ARM FPA an
impossibility. It is unknown whether other compilers provide ARM FPA
support with EABI. Support for ARM FPA can be re-added in the future
should the need arise, but since ARM VFP is available for ARMv5 and up,
we should encourage implementors to instead use soft-floats or VFP.
Change-Id: I3671aba575118ae3e3e6d769759301c8f2f496f5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
