This removes the need to install an event filter on qApp just for this.
A similar thing was done with setPalette to reduce the number of event filters
in e.g. SystemPalette and Quick Controls.
[ChangeLog][QtGui][QGuiApplication] Added fontChanged signal
Change-Id: Ifa843aa42b91ac63ab17c3b064ac0e764aac77d3
Reviewed-by: J-P Nurmi <jpnurmi@qt.io>
We have the ability to blacklist tests for CI runs now.
Task-number: QTBUG-35109
Change-Id: I8590e83faba764dce2d52e8c62e2e2c63f7bf219
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Setting the same brush on the same group and role should
not detach nor alter the result of QPalette::isCopyOf().
Task-number: QTBUG-56743
Change-Id: Ic2d0dd757d703b01e8c5d835a8c124b3317653f4
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The test would fail on Wayland with window decorations enabled because there
window content is drawn to an FBO before it's blended with the window
decorations (also drawn by the client).
Task-number: QTBUG-51741
Change-Id: I7c74ad235c6a2d50231a9f863da1810675dd4eae
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
... that become apparent after switching qtestlib to use enhanced mouse
event (a37785ec76). With the old code path,
where QGuiApplication was deducing event type it would deduce mouse release
event even when there wasn't one. The new code path doesn't do that, which
revealed an obscure problem when mixing QTest::mouse* APIs (where QWindow
overload goes through QWindowSystemInterface API and QWidget overload goes
through QApplication::notify() and sets mouse_buttons from there). What
happened in this specific test case "./tst_qtreeview selection statusTip" was:
// tst_QTreeView::selection sets mouse_buttons = Qt::LeftButton from QApplication::notify
QTest::mousePress(widget, Qt::LeftButton, ..)
// tst_QTreeView::statusTip
QTest::mouseMove(window, )
The old code path sees that position and state has changed, creates a fake
mouse event, which gets deduced as mouse release even if there wasn't one.
And by luck this happened to set mouse_buttons=Qt::NoButton. So when we use
mouse_buttons later to create QMouseEvent everything works as expected. With
the enhanced mouse we don't clear the pressed button from mouse_buttons (set
in tst_QTreeView::selection) as this is done only from press/release events,
then pass it to QMouseEvent and later because of that QApplicationPrivate::
pickMouseReceiver() returns nullptr.
The fix here is to use e->buttons when constructing QMouseEvent, instead of
relying on mouse_buttons which gets changed from various places and has other
issues that can not be solved without invalidating the current documentation
of QGuiApplication::mouseButtons() (e.g QTBUG-33161). Tests and any Qt code
in general should avoid using the fragile QGuiApplication::mouseButtons() API.
This patch does not affect the old code path (it continues working as before)
and fixes the issue described above for the enhanced mouse API. The enhanced
mouse API actually is better in a way that it does not get affected by button
state from test functions that run earlier, as opposed to the old code path
where every subsequent test function uses mouse_buttons in whatever state it
was left by the test functions that run earlier.
Not relying on mouse_buttons when creating QMouseEvent helped also to discover
other logic error. This caused an in incorrect button state for a mouse move
event that is generated for a release event that simultaneously changes a mouse
position.
Task-number: QTBUG-64043
Change-Id: I6ad8e49d8437ab0858180c2d0d45694f3b3c2d60
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
tst_noqteventloop.cpp 'event' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'canFetchMore' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'fetchMore' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'hasChildren' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'rowCount' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'columnCount' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'index' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'parent' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtreeview.cpp 'data' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtextedit.cpp 'begin' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtextedit.cpp 'end' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtextedit.cpp 'updateState' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtextedit.cpp 'drawPixmap' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qtextedit.cpp 'type' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
Change-Id: I2a0c5da15994619383c1f90fee311927e58d7af0
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
From: https://tronche.com/gui/x/xlib/events/exposure/expose.html
"The circumstances in which the X server generates Expose events
are not as definite as those for other events."
On windows with XCB_GRAVITY_NORTH_WEST flag set we should not get
expose events according to e2665600c0,
but as stated earlier this might not always be true.
Nevertheless, sometimes we get expose event from X server when shrinking
window, but most of the time we don't. Make the test not flakey by
checking that we get at least 1 expose event, instead of exactly 1.
Now running test 500 times in a loop does not fail.
Task-number: QTBUG-63424
Change-Id: I8004e622020cc09e11b7d592faf6d9ee1b9cfee2
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
(cherry picked from commit 542e11ab2b)
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Liang Qi <liang.qi@qt.io>
The qWaitFor functions themselves can not trigger a test failure, as that
will not result in the test function exiting early, so every single call
to qWaitFor needs to be wrapped in a QVERIFY.
Change-Id: Id15a1549f31d06cdbf788e1d84ea431c28636ec8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Convert QSysInfo/QOperatingSystemVersion to __builtin_available where
required or possible, or to QOperatingSystemVersion where
__builtin_available cannot be used and is not needed (such as negated
conditions, which are not supported by that construct).
Change-Id: I83c0e7e777605b99ff4d24598bfcccf22126fdda
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Swapping from RHEL 7.2 to 7.4 produces new autotest failures.
Task-number: QTBUG-63433
Change-Id: I3e59aa73b5874cfec06e166f521e06b0c7829743
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
From: https://tronche.com/gui/x/xlib/events/exposure/expose.html
"The circumstances in which the X server generates Expose events
are not as definite as those for other events."
On windows with XCB_GRAVITY_NORTH_WEST flag set we should not get
expose events according to e2665600c0,
but as stated earlier this might not always be true.
Nevertheless, sometimes we get expose event from X server when shrinking
window, but most of the time we don't. Make the test not flakey by
checking that we get at least 1 expose event, instead of exactly 1.
Now running test 500 times in a loop does not fail.
Task-number: QTBUG-63424
Change-Id: I8004e622020cc09e11b7d592faf6d9ee1b9cfee2
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Remaining uses of Q_NULLPTR are in:
src/corelib/global/qcompilerdetection.h
(definition and documentation of Q_NULLPTR)
tests/manual/qcursor/qcursorhighdpi/main.cpp
(a test executable compilable both under Qt4 and Qt5)
Change-Id: If6b074d91486e9b784138f4514f5c6d072acda9a
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Remaining uses of Q_DECL_OVERRIDE are in:
src/corelib/global/qcompilerdetection.h
src/corelib/global/qglobal.cpp
doc/global/qt-cpp-defines.qdocconf
(definition and documentation of Q_DECL_OVERRIDE)
tests/manual/qcursor/qcursorhighdpi/main.cpp
(a test executable compilable both under Qt4 and Qt5)
Change-Id: Ib9b05d829add69e98a86238274b6a1fcb19b49ba
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Conflicts:
examples/examples.pro
qmake/library/qmakebuiltins.cpp
src/corelib/global/qglobal.cpp
Re-apply b525ec2 to qrandom.cpp(code movement in 030782e)
src/corelib/global/qnamespace.qdoc
src/corelib/global/qrandom.cpp
src/gui/kernel/qwindow.cpp
Re-apply a3d59c7 to QWindowPrivate::setVisible() (code movement in d7a9e08)
src/network/ssl/qsslkey_openssl.cpp
src/plugins/platforms/android/androidjniinput.cpp
src/plugins/platforms/xcb/qxcbconnection.cpp
src/plugins/platforms/xcb/qxcbconnection_xi2.cpp
src/widgets/widgets/qmenu.cpp
tests/auto/widgets/kernel/qwidget_window/tst_qwidget_window.cpp
Change-Id: If7ab427804408877a93cbe02079fca58e568bfd3
Although the window is refused input for the most part from the system,
it does not act like that it is blocked by the application modal dialog.
This ensures that it is the case and prevents things like being able to
double click on the title bar to maximize the window on Windows.
Task-number: QTBUG-49102
Change-Id: If1582819b90cb2ec9d891f664da24f13bfec7103
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
Conflicts:
src/widgets/kernel/qwidget.cpp
This merge also extends the expected output of the pairdiagnostics
teamcity output (added in dev in commit
c608ffc56a) after the recent addition of
the flowId attribute to the teamcity output (commit
8f03656211 in 5.9).
Change-Id: I3868166e5efc45538544fffd14d8aba438f9173c
- Determine window sizes according to screen size and turn off
scrolling.
- Center the window to get it out of the way of taskbars.
- Make the window top-most.
- Turn off scaling so that coordinates passed to the QWindow
child match device coordinates and the child is positioned
correctly.
- Make the child window a yellow raster window for easier
debugging.
Task-number: QTBUG-45956
Change-Id: I05864770f8ed638d0a36f3e3f2afed73d2952436
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
These tests need fixing, but they are already partially blacklisted
and need investigation once the switch is completed.
Task-number: QTQAINFRA-1292
Task-number: QTQAINFRA-1355
Task-number: QTQAINFRA-1362
Change-Id: Ic50d0c4a01ee7e72be1129d418eff244ba783185
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Fixes flakiness where we enter and exit window states too fast on macOS,
while also removing 2 second waits in the positioning tests that were
slowing things down needlessly.
Change-Id: Ia4ee4d4812474c520fdd3f76b047f4eabe1a8220
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This test verifies processEvents(WaitForMoreEvents)
behavior by first processing all pending events (in
a loop) and then verifying that a following processEvents
call actually waits.
But there is no guarantee that the OS won’t introduce
more events after the first loop has completed. This
does indeed seem to happen on recent versions of macOS.
Change the test to not require that the processEvents
call blocked and de-blacklist.
Task-number: QTBUG-61131
Change-Id: Ic8fa74a6085165442791264f6f137a2fa6083138
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The tests uses QWindow::requestActivate() to verify that a window does
not become active when a modal dialog is running, but on macOS we have
no guards for this, so the test can potentially fail.
In addition, due to a bug in QCocoaEventDispatcher, we end up waiting
5 seconds for that failure to manifest.
Task-number: QTBUG-61965
Task-number: QTBUG-61964
Change-Id: I2f1b62d953e9b6dabf2df0c3023564f27919c498
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Like other QWindow properties we can just store it, and the platform
window should pick it up on creation like other properties.
[ChangeLog][QtGui][QWindow] setMask() no longer requires the window
to be created to have an effect; it can be set at any time.
Change-Id: I55b616363801b770bd61bda5325b443013b99866
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Changed testing of focus of modal dialogs to match behavior on offscreen
and minimal platforms.
Change-Id: Ife3ea41b4b78df2e64c8d8e740332914b1e5a67c
Reviewed-by: Teemu Holappa <teemu.holappa@qt.io>
Make it possible to blacklist the (newly created)
quitOnLastWindowClosedMulti() if all else fails.
Task-number: QTBUG-59088
Change-Id: I8c143a2017e7aefaf6cad6ada9c1464d40c952e7
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Carbon is deprecated and we should not rely on it at runtime or compile
time. These headers were only included for a small collection of
keyboard key constants which have now been hardcoded instead.
Change-Id: Ia2eaa267584b63be8019be3bbf64cba897a985a8
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Replace all QT_NO_PROCESS with QT_CONFIG(process), define it in
qconfig-bootstrapped.h, add QT_REQUIRE_CONFIG(process) to the qprocess
headers, exclude the sources from compilation when switched off, guard
header inclusions in places where compilation without QProcess seems
supported, drop some unused includes, and fix some tests that were
apparently designed to work with QT_NO_PROCESS but failed to.
Change-Id: Ieceea2504dea6fdf43b81c7c6b65c547b01b9714
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
We can defer the creation until the window is shown.
Change-Id: I3d5b45ae59ee0925996cf12cd46dd574c8c6ef95
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Several people agreed that the name was confusing and that this one
is better.
Task-number: QTBUG-54616
Change-Id: I31cf057f4bc818332b0551a27d1711599440207c
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Sune Vuorela <sune@vuorela.dk>
- Declare as Q_MOVABLE_TYPE
- Prevent QList<QPointerUniqueId> from being instantiated
(use QVector instead)
- Add equality relational operators
- Add qHash() overload
- Replace non-default ctor with named ctor.
- Add Q_DECL_NOTHROW.
- Add Q_DECL_CONSTEXPR.
- Rename numeric() -> numericId().
- Update docs.
The extension vector for this class calls for additional
properties to be added later, but these are not user-
settable. It thus suffices to rely on the only data
member, a qint64, which can be reinterpreted to an index
into an array or hash with actual objects. This allows
to make the class a Trivial Type (ie. no overhead over
an int) while still supporting later extension. Cf.
QSslEllipticCurve as another example of such a class.
The extension has to maintain the following invariants,
encoded into user code by way of being used in inline
functions:
- m_numericId == -1 <=> !isValid()
This is trivial to support. An extension could not and
still cannot reinterpret the qint64 member as a d-pointer,
but a d-pointer is only necessary for user-settable
properties where updating a central private data structure
would cause too much contention.
Add a test.
Since this type is used in other modules, keep the existing
functions, but mark them as deprecated with the expectation
that these compat functions be removed before 5.8.0 final.
Task-number: QTBUG-54616
Change-Id: Ia3ede0ecaeeef4cd3ffa94a72b1050bd409713a5
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Analogous to QWidget::setAttribute(), introduce an API to easily
enable/disable a single window flag without having to resort to
w.setFlags(w.flags() | Qt::NewFlag).
Change-Id: Ib0f7254a34c8d884cdec181c41b99e5ef035d954
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Sérgio Martins <sergio.martins@kdab.com>
Change qtConfig(opengl(es2)?) to qtConfig(opengl) as that covers
the case without any regular expression.
Change-Id: I935e3150f87e195e8bd3d0e55b4ed43572b131cf
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This is second attempt of change cd26e66c2e
This allows us to not have conflicts between the point ids between
different devices for QtQuick pointer handlers.
We do this in QtGui because we can then safely compare point ids from
QTouchEvent::TouchPoint and QQuickEventPoint.
(Point ids that QtQuick pointer handlers use will be based on the point
ids provided by QTouchEvent::TouchPoint::id)
[ChangeLog][QtGui][QTouchEvent][Important Behavior Changes]
Touch point ids are now unique even between different devices. As a
consequence of that, you cannot anymore assume that
QTouchEvent::TouchPoint::id has the same value as given by the native
platform nor the same value as given by synthesized touch points.
Change-Id: Iad2fd8c6a43ccc571a227a01134a1e8f829dfaf4
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
Same behavior as QWidget, and allows platform plugins to maintain order of
native windows based on the QWindow hierarchy, instead of having to manually
keep track of window levels.
Change-Id: Iacc7e9ee2527f0737c9da6debc7cec101064f782
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
With the client message _NET_ACTIVE_WINDOW, not all window managers
will pass focus from a child window to its root window, Detect this
child-to-root case, and use xcb_set_input_focus() instead.
Task-number: QTBUG-39362
Change-Id: Ib32193018e3b725b323f87d7306c9ae9493d78a7
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
The patch is good, but currently breaks touchmouse test in qtdeclarative.
We need to fix the touchmouse test first, then go ahead and reapply this
patch once qtdeclarative is fixed.
This reverts commit cd26e66c2e.
Change-Id: I222e6240f5ff0eff9c8a3544819499847f6b48fa
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
This allows us to not have conflicts between the point ids between
different devices for QtQuick pointer handlers.
We do this in QtGui because we can then safely compare point ids from
QTouchEvent::TouchPoint and QQuickEventPoint.
(Point ids that QtQuick pointer handlers use will be based on the point
ids provided by QTouchEvent::TouchPoint::id)
Change-Id: I8b9ab0d44224b15175b820d33cbb2d8bd21e99f2
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
There is no need to switch to the current directory, when there is no
process support. This also fixes running the test on sandboxed target
platforms.
Change-Id: I25fabb8b22d3510062a012884eb1eaab682901d3
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Instead of creating files relative to the application binary, use a
temporary directory. This also cleans up the test data after execution.
Change-Id: I5d680fd01c60b0d33df06f9cb9aaef7c86279710
Reviewed-by: Jesus Fernandez <jesus.fernandez@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Use the new qtConfig macro in all pro/pri files.
This required adding some feature entries, and adding
{private,public}Feature to every referenced already existing entry.
Change-Id: I164214dad1154df6ad84e86d99ed14994ef97cf4
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
These tests use helpers, which are not supported on UIKit platforms.
Change-Id: I51447754dba2cd2547be05c3767e4ff3b6b5a671
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
In Qt Quick there are many places which copy mouse events repeatedly,
with the only goal of adjusting the local position. Instead it's much
more sensible to re-use the same event.
Change-Id: I2c6f2b73ee3a7a6df489f813cf2f60b48a6e48df
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Send synthesized expose event while shrinking the QWindow. This fixes
the regression which can break some applications which need the paint
events while shrinking the QWindow.
Added auto test.
Task-number: QTBUG-54040
Change-Id: Iaa992abba67f428237fa12c6cae56592b8fcadb0
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
Reviewed-by: Louai Al-Khanji <louai.al-khanji@qt.io>
The test is flaky and we need to blacklist it.
Task-number: QTBUG-54179
Change-Id: I12ff10b2370e4e6cc55782031449d4c15cf468b7
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Passes locally (on 10.10), but seems to have become
unstable on the CI system.
Task-number: QTBUG-53790
Change-Id: I0432fca4121b97bcdd6cec529fc4e148dfb8c1ab
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
If applicationDisplayName has not been set, the signal is emitted when
applicationNameChanged() is emitted.
[ChangeLog][QtGui][General] Add
QGuiApplication::applicationDisplayNameChanged() signal.
Task-number: QTBUG-53076
Change-Id: I18494ad90bd8dec3f79ef5175a3a85e776560fd0
Reviewed-by: David Faure <david.faure@kdab.com>
The test used to output random character sequences which contained
terminal control characters. Change it to output plain ASCII and
Unicode syntax for non-ASCII characters.
Change-Id: Ifaa72f50242bd27416a8698a1f5152bc8b902898
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
The header defined a macro QTEST_NO_CURSOR depending
QT_NO_CURSOR or obsolete platforms Windows CE and Meego.
Replace usages by QT_NO_CURSOR in the tests.
Change-Id: I3edac88e684d1f932dd3b721bb1c1b3fe9144237
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Removing blacklistings from tests that are now passing.
Change-Id: I00aa1ce286d3e7715fb4bee4a36d0d77049a29ae
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@theqtcompany.com>
Remove #ifdef sections for Q_OS_WINCE and wince .pro file clauses in library,
and tests.
Task-number: QTBUG-51673
Change-Id: I55f61845c3b54027c467a5c59c122e7d16955358
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
This change partially reverts 1bfc7f68 about QT_HAS_BUILTIN define
and undef in src/corelib/tools/qsimd_p.h.
This change is also squashed with "Fall back to c++11 standard
compiler flag for host builds" which is done by Peter Seiderer.
Conflicts:
mkspecs/features/default_post.prf
src/3rdparty/sqlite/0001-Fixing-the-SQLite3-build-for-WEC2013-again.patch
src/3rdparty/sqlite/sqlite3.c
src/corelib/tools/qsimd_p.h
src/gui/kernel/qevent.cpp
src/gui/kernel/qwindowsysteminterface.cpp
src/gui/kernel/qwindowsysteminterface_p.h
src/plugins/bearer/blackberry/blackberry.pro
src/plugins/platforms/cocoa/qcocoasystemsettings.mm
src/plugins/platformthemes/gtk2/gtk2.pro
src/plugins/styles/bb10style/bb10style.pro
src/sql/drivers/sqlite2/qsql_sqlite2.cpp
tools/configure/configureapp.cpp
Task-number: QTBUG-51644
Done-with: Peter Seiderer <ps.report@gmx.net>
Change-Id: I6100d6ace31b2e8d41a95f0b5d5ebf8f1fd88b44
tst_qkeyevent.cpp(140): warning C4334: '<<': result of 32-bit shift implicitly converted to 64 bits (was 64-bit shift intended?)
Change-Id: Id3e0eea125f7f7ec13f9b9428e034b922d2ce204
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
QTypeInfoQuery was introduced for 5.6 to decouple isStatic
and isRelocatable so old code continues to work. But since
this test still uses !isStatic to mean trivially-relocatable,
it will fail as soon as one of the checked types is marked as
Q_RELOCATABLE_TYPE instead of Q_MOVABLE_TYPE.
Incidentally, such a change is in the pipeline for Qt 5.7/5.8,
so fix the test by porting to QTypeInfoQuery. Do this in 5.6,
because that's when QTypeInfoQuery was introduced.
Change-Id: I06f815f26ca9b430e124c4a2f8de2a729999762b
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
When a modal window is closed and the mouse is not under the modal
window - find a proper window and send a fake enter event.
Added auto test for checking enter event on window when modal window
is closed.
Task-number: QTBUG-35109
Change-Id: I370b52d386503820ac9de21e6d05fd019ca456ec
Reviewed-by: Shawn Rutledge <shawn.rutledge@theqtcompany.com>
This also reverts commit 018e670a26.
The change was introduced in 5.6. After the refactoring, 14960f52,
in 5.7 branch and a merge, it is not needed any more.
Conflicts:
.qmake.conf
src/corelib/io/qstandardpaths_mac.mm
src/corelib/tools/qsharedpointer_impl.h
tests/auto/widgets/itemviews/qlistview/tst_qlistview.cpp
Change-Id: If4fdff0ebf2b9b5df9f9db93ea0022d5ee3da2a4
Blacklisting all tests, which were failing locally.
Task-number: QTQAINFRA-949
Change-Id: I40c25ab0155b8977596d61297ab252a546515f87
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@theqtcompany.com>
The QKeySequence test no longer uses private members (since commit
725bdc3fd2), so that is no longer needed.
Also, remove the unused include from the test.
Change-Id: I4d252bb3efd7282f74c44e48444c23ab51d48ea5
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
This reverts commit 4c71db7567.
It's too risky for 5.6, we should let it cook in dev for a while
and backport when ready.
Change-Id: I91e677e65d967f29c84a254cd3dffc8bb847b263
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Resetting focus_window and other internal QGuiApplication variables before
calling setVisible(false) and destroying the platform window means that the
platform window can't reason about whether or not it was the focus window
unless it can resolve that using native APIs. We should let the platform
window take care of resetting the focus window and related states, and
only execute our fallback logic if the plugin doesn't do the right
thing.
We also use QPA to update the state instead of modifying the internal
QGuiApplication variables directly, so that events and signals are
emitted as a result of the reset.
The QLineEdit test gets two added calls to processEvents(), since
assuming that activateWindow() is synchronous is not correct, and
would result in the QMenu resetting the focus window to 0 on destroy.
Task-number: QTBUG-46414
Change-Id: I562788393ed0ffd77d7a4be2279862322f721c1a
Reviewed-by: Błażej Szczygieł <spaz16@wp.pl>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
From Qt 5.7 -> tools & applications are lisenced under GPL v3 with some
exceptions, see
http://blog.qt.io/blog/2016/01/13/new-agreement-with-the-kde-free-qt-foundation/
Updated license headers to use new GPL-EXCEPT header instead of LGPL21 one
(in those files which will be under GPL 3 with exceptions)
Change-Id: I42a473ddc97101492a60b9287d90979d9eb35ae1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
While a native dialog is open, the application message queue is
handled by the native event loop which is external to Qt. In this
case, QEventDispatcherWin32::processEvents() does not run and socket
notifiers will not be activated. So, this patch moves the notifier
activation code into the window procedure, which enables socket
event processing with native dialogs.
Task-number: QTBUG-49782
Task-number: QTBUG-48901
Change-Id: Icbdd96b2e80c50b73505f4fe74957575b83d6cf1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
- Do not save geometry when going from maximized->fullscreen
- Use SW_SHOWNA instead SW_SHOWNOACTIVATE as otherwise the
maximized geometry is restored.
- Add a test for Windows.
Task-number: QTBUG-49709
Change-Id: Ic81e7398ee90d499a50b02192a45cb09276a2105
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
TEST_HELPER_INSTALLS cannot be used on platforms with no
QProcess support.
Change-Id: I2a6a283d94ca4487fc628449c53fc37140dd291d
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Move some code (like registrations of meta types) from init() to
initTestCase() in the process.
Change-Id: I57db5156647cfadab554fbed853b2e68b2815f3b
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
QVariant was using QColor::name() to convert a color to string, which by
default loses alpha value. The patch is fixing the problem by always
including the alpha value in the string when required.
[ChangeLog][Core][Variant] QVariant(QColor)::toString() uses
QColor::HexArgb format when the alpha component is different from 1.
Task-number: QTBUG-37851
Change-Id: I887460c1ea151180ba99d64dd873ba9d6e2268f2
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
The platform is no longer supported or actively maintained, and is
in the way for improvements to the Unix event dispatcher and QProcess
implementations.
Change-Id: I3935488ca12e2139ea5f46068d7665a453e20526
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
The test is new and something seems to go wrong on the Ubuntu test
machines.
Since it ends up failing a lot, blacklist it for the time being.
Task-number: QTBUG-49388
Change-Id: I06de7ba15aaee68351a747e3a06c0150018b39de
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Tests that window creation order doesn't affect the resulting geometry
of the parent and child windows.
Change-Id: Iff0cb5adf87107dfed4a633a67e1b4312b90e24a
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
When a child QWindow is shown by calling setVisible(true), we don't need to
create the platform window immediately if the parent window hasn't been
created yet.
We defer creation until the parent is created, or we're re-parented into
a created parent or made top level.
This optimization is more important now that we create the full parent
hierarchy once we decide that we need to create a child QWindow.
Change-Id: Ia4f0430f0d3709a12f41f6473c1cea6b0ef3c9cd
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
If the QWindow has been created and has a platform window, we need to
ensure that the windows in the parent hierarchy also are created before
we set a new parent on the platform window, otherwise the platform window
will think that it's a top level window.
Change-Id: Icb2c3cd5411cd1eb595e8673e144095feda31df9
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
To be able to create a platform window for a given QWindow we need to
sync up the parent hierarchy first, so that the newly created window
can be placed into that hierarchy.
Without creating the parent hierarchy first, the QPlatformWindow will
end up thinking it's a top level window, when in reality is represents
the platform backing of a child QWindow.
Change-Id: I2cad7759fbc118b04718e7a27ec7570ce1238757
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Use character literals where applicable.
Change-Id: I1a026c320079ee5ca6f70be835d5a541deee2dd1
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Use case insensitive comparison and static invocation
of QGuiApplication::platformName().
Change-Id: I8c197c7b4f0669f71c019fbcee09a0f03dfab399
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
The test assumed that an event loop can be tested for emptiness
multiple times, which is wrong because an event can be delivered any
time.
Change-Id: Ic44245321eeed2091b640ada2c83d205b83a1cc2
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Disable input and cursor for QGuiApplication instances used in
autotest to initialize it properly.
Change-Id: I78dc9b776269c082c20f244a51f858289129275d
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
The keyword no longer has a meaning for the new CI.
Change-Id: Ibcea4c7a82fb7f982cf4569fdff19f82066543d1
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
If Qt is not running its own event loop (e.g. if Qt is a plugin running
in a non-Qt host application with its own event loop, a call to
sendPostedEvents() should process all events by default, and not depend
on the flags passed to the last call to processEvents()
We also modify sendPostedEvents() to call its base implementation instead
of directly calling QCoreApplication::sendPostedEvents(). (The behavior of
the base implementation is the same, so no behavior change there).
This also adds a test for QWindow event handling without Qts event loop is
running. This is a black box test, just to ensure that basic functionality
is working. It can be extended later.
Task-number: QTBUG-45956
Change-Id: I7d688c0c6dec5f133fb495f07526debdde5389af
Reviewed-by: Jørgen Lind <jorgen.lind@theqtcompany.com>
This property might be set by applications whose desktop entry file name
cannot be determined by heuristics already in place.
It is particularly useful for QtWayland as it can be used to determine
the app_id simply by stripping the ".desktop" suffix from this property.
Without a correct app_id, Wayland compositors won't be able to e.g.
show the application icon on task managers.
This property is also very interesting for X11 as there are various
desktop environments trying to map windows to launchers.
It will be possible to export desktopFileName as a xproperty, making
such mapping less error prone.
Change-Id: I0fef23f28f383639e625379ab46e36aecb338ac4
Reviewed-by: Martin Gräßlin <mgraesslin@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: David Faure <david.faure@kdab.com>
Input context selection works differently across platforms. On some
platforms it is not possible to request a specific context at all
(e.g. Wayland). This will be unified, depending on the environment
variable "QT_IM_MODULE", you will get:
- null: default (platform) context, if defined (otherwise no context)
- empty: no context
- set: set one, if it exists and is valid (otherwise no context)
[ChangeLog][Platform Specific Changes] Haromnized input context selection.
QT_IM_MODULE environment variable will be taken into account.
Change-Id: Ic8f826fbc6ace25941cd19b9b086943e848fbe01
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
Reviewed-by: Nedim Hadzic <nedim.hadzic@pelagicore.com>
- Replace Q[TRY]_VERIFY(pointer == 0) by Q[TRY]_VERIFY(!pointer).
- Replace Q[TRY]_VERIFY(smartPointer == 0) by
Q[TRY]_VERIFY(smartPointer.isNull()).
- Replace Q[TRY]_VERIFY(a == b) by Q[TRY]_COMPARE(a, b) and
add casts where necessary. The values will then be logged
should a test fail.
Change-Id: I624deb320c378c18a29b3707f48583d53bfd5186
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
The test sends touch events to the root item at the top left
corner which fails if the views starts to scroll.
Make the view sufficiently large to prevent scrolling and align
at top left.
FAIL! : tst_QTouchEvent::touchBeginWithGraphicsWidget() Compared values are not the same
Actual (((root->touchBeginCounter))): 0
Expected (1) : 1
Loc: [/work/build/qt/qtbase/tests/auto/gui/kernel/qtouchevent/tst_qtouchevent.cpp(1471)]
Change-Id: I357322ccc809ddb5cb587febf3c75cbe497e59d8
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
They didn't show up in the "old" CI runs because they usually pass the second
time they are executed - which the testrunner does. The new CI doesn't do that
anymore, instead we now mark those tests explicitly and will track their record
of passing and failing in the new metrics database.
Change-Id: Id34dd6f792f38995b07b6fec88f833df64de2f8b
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
- Use QTRY_COMPARE() in touchBeginWithGraphicsWidget.
- Change raw event translation tests to wait for the
window to become active to avoid WM positioning issues.
- Blacklist the raw event translation tests on Linux.
Task-number: QTBUG-46266
Change-Id: I73aae375ee279a518a2a083d0ce8919cce474cb3
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Add CONFIG += testcase to the .pro file which was missing.
The test thus was never executed by make check and left to
rot.
Fix up code:
- Remove module includes.
- Introduce explicit constructors taking parent object
for helper classes, removing calls to setParent().
- Ensure test does not leak objects by converting pointers
to stack variables or introducing QScopedPointer, verify
by checking for an empty window list in cleanup().
- Simplify code by removing unneeded variables.
- Split up conditions in QVERIFY().
Fix tests:
- Show windows were required when events are sent to
QWidget::windowHandle().
- Invert the conditions checking whether touch events are
accepted by widgets since widgets no longer accept them
by defaults in Qt 5 after
e50416066c.
- XFAIL multiPointRawEventTranslationOnTouchPad()
which started to fail at some point in Qt 5.
- Mark as insignificant on OS X due to crash.
Task-number: QTBUG-46266
Change-Id: I6676d021afb015411a24d97d9b8f7c327d4d3c3f
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
This should allow us to make the rest of 14.04 enforcing
Change-Id: I37f6751e8b966b047d1bd2e49ba9482e5846acb1
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@digia.com>
In order to obey a palette set globally on QApplication, an application
attribute for checking if it's set at all is added.
Task-number: QTBUG-39800
Change-Id: I26b965e6e18e0e1ca4df03cf343b3527df3636b2
Reviewed-by: J-P Nurmi <jpnurmi@theqtcompany.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
On some platforms show() may result in the window being shown full
screen, depending on the defaultWindowState of the platform. If
that's the case, the resulting window size does not follow
the requested size (though the internal normal geometry should).
We need to use showNormal, so that we guarantee that the window
state is WindowNoState.
Change-Id: Ied080eaca13d759501ea292b5e6b2df4e3b32426
Reviewed-by: Jan Arve Sæther <jan-arve.saether@theqtcompany.com>
Make styleHints a static member variable of QGuiApplicationPrivate and
fix accessor accordingly. Extend tst_QApplication::settableStyleHints()
to run without QApplication instance as well and add a similar test
to QGuiApplication.
Task-number: QTBUG-44499
Change-Id: I42b92ef38f7dd512d08d70accfa7dd4f09a22f01
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Currently Qt uses the QPlatformIntegration::StyleHint
SynthesizeMouseFromTouchEvents to check whether to synthesize mouse
events from touch events. But not only platform plugins can produce
touch events, they can be created by e.g. QTest::touchEvent() and in
this case we almost definitely need synthesizing regardless of the
platform.
This commit introduces a QTouchDevice::MouseEmulation capability which
replaces use of the QPlatformIntegration::SynthesizeMouseFromTouchEvents.
So it's possible to pass QTouchDevice without this capability to
QTest::touchEvent() and be sure that mouse events will be synthesized.
Notice that touch pads always emulate mouse events.
As a result we can activate some tests which were disabled for specific
platform configurations by commits 6c1670d8c2
and e9760f1559.
Change-Id: Idc82fa4007a095fc1cb5934979361b0023d2b793
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
We must do something when requestUpdate() is called on a QWidgetWindow.
The semantics of UpdateRequest for QWindow and QWidget are unfortunately
different: for widgets an UpdateRequest means "sync the backing store".
For QWindow it also involves marking as dirty.
Change-Id: Idf40b3fc0873652dc081edeb12c96b3007a126ef
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
Reviewed-by: Jørgen Lind <jorgen.lind@theqtcompany.com>
QPlatformTheme::keyBindings() performs a binary search
into an ordered list of StandardKey -> Key Sequence
mappings where each StandardKey can have multiple
key sequences.
Previously the order of the Key Sequences in the
returned list would be indeterministic and, except
for the designated pri-1 key sequence, would not
necessarily correspond to the list order. (The
ordering was dependent on where the binary search
"hits", which again depends on the size of the list.)
This caused trouble when adding mappings, since it
would change the order in the returned key sequence
list for existing mappings and confusingly cause
(apparently) unrelated test failures.
Fix this by replacing the manually coded binary search
with std::equal_range.
One test case needed to be fixed up because it had the
result in the wrong order (verified by looking at
QPlatformTheme::keyBindings).
Change-Id: I555ca2736b1a8e6454dc79645a8246f80119cfc2
Done-with: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
Qt copyrights are now in The Qt Company, so we could update the source
code headers accordingly. In the same go we should also fix the links to
point to qt.io.
Outdated header.LGPL removed (use header.LGPL21 instead)
Old header.LGPL3 renamed to header.LGPL3-COMM to match actual licensing
combination. New header.LGPL-COMM taken in the use file which were
using old header.LGPL3 (src/plugins/platforms/android/extract.cpp)
Added new header.LGPL3 containing Commercial + LGPLv3 + GPLv2 license
combination
Change-Id: I6f49b819a8a20cc4f88b794a8f6726d975e8ffbe
Reviewed-by: Matti Paaso <matti.paaso@theqtcompany.com>
Behavior will agree with the docs.
[ChangeLog][QtGui][QWindow] lastWindowClosed will be emitted even if
quitOnLastWindowClosed is not set
Task-number: QTBUG-32956
Change-Id: I7bb269d53894859fee27e171eea7ad472ea86af0
Reviewed-by: Jørgen Lind <jorgen.lind@theqtcompany.com>
Our theory for the failure of framePosition() not having the expected
value after setFramePosition towards the end of the test is that we try
to call setFramePosition() while the getting-back-from-fullscreen-to-normal
window animation is still running, at which point the compositor may
just choose to ignore our move request.
Similarly to when going fullscreen, also wait when coming back from it.
Change-Id: Icfc92f277d96dccdfad772c4aac252b2a20c6196
Reviewed-by: Jørgen Lind <jorgen.lind@theqtcompany.com>
The test still fails sporadically at a new place, so this adds some
debug information when it fails to may help us identify what is going
wrong.
Change-Id: Ife0f171299ef7e800a2d808602e76ca2f3885964
Reviewed-by: Jørgen Lind <jorgen.lind@theqtcompany.com>
The part of the test that verifies that setFramePosition moves the window
successfully appears to be very unreliable in the CI system. The "tested"
frame position is calculated to be at (40, 40) relative to the top left
of the available screen geometry, which can be non-zero due to task bars
and similar system ui elements. However that position appears to be
unreliable in the sense that the window manager doesn't seem to always
respect that. So instead let's try placing the window (by frame position)
in the center of the screen instead.
Change-Id: I96fe6c37e748fc18262632b5effe5a9e90dc0028
Reviewed-by: Jørgen Lind <jorgen.lind@theqtcompany.com>
Don't check for absolute counts of resize events but just check if we
were resized. Also use QTest::qWaitForWindowExposed instead of QTRY_COMPARE
and checking for QEvent::Expose.
Change-Id: Ie383493a8ce6d88cad50bd6375d432ad1578449c
Reviewed-by: Jørgen Lind <jorgen.lind@theqtcompany.com>
These synchronously delivered events allow applications to correctly
and conveniently handle native platform surfaces being destroyed. This
is particularly useful when doing rendering on a non-gui thread as it
allows to shutdown rendering before the native surface gets destroyed
from under us.
Task-number: QTBUG-42476
Task-number: QTBUG-42483
Change-Id: I63f41bbdb32f281d0f3b8ec2537eb2b0361f3bb3
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
The setMimeData() function is documented to take ownership of
the object passed in, but in the case where the platform
plugin did not support the requested mode, we would simply
return without deleting the object nor telling the application,
so it would cause a potential memory leak. We need to honor the
contract, even when we fail to set the mime data.
Test was updated to avoid verifying the leak in cases where
the platform does not support all modes.
[ChangeLog][QtGui][Clipboard] Fixed a memory leak in setMimeData()
when the platform plugin did not support the requested mode.
Task-number: QTBUG-41852
Change-Id: I2112da1613199fe1b56724e7ccf097b9e912c117
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
In some CI configurations this fails from time to time. Have to disable
it unless we can make it more robust somehow.
Change-Id: Iadd8904d7223a6aeff53dafa36b94df3f60e1ad8
Reviewed-by: Robin Burchell <robin.burchell@viroteck.net>
Takes the total time for this test from ~1.2 seconds to ~0.42 seconds for me.
Change-Id: I426e600a7afe01d7343108b432eda8b83d6f3d85
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
QExposeEvent::region() reports a region in a random coordinate system.
The behavior is undocumented and the platform plugins do different things.
xcb, offscreen and ios are correct. These set the region in local coordinates,
which is the most logical interpretation of the expose region.
windows is almost correct, except for one occurrence.
cocoa and others need changes: passing in geometry() as the exposed region is
always wrong.
The patch documents the expected behavior both for QExposeEvent and
internally in QWindowSystemInterface. The problematic plugins are fixed to
use local coordinates.
Task-number: QTBUG-40470
Change-Id: I6ded3154d14254fa71d4292d8e1b5e6cf696c81a
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
Instead of abusing inheritance to provide convenience constructors,
use simple inline constructor functions. The name got a lower-case
q to indicate a free function. The usual fromXYZ() static methods
were deemed not fitting in this case in the initial round of review,
since they implied some kind of conversion while these functions are
simply constructors of formsts, which contain no data.
This also solves the problem that some of these ctors could have been
called with just one argument and were therefore candidates for hidden
QPixelFormat temporary injection.
QPixelFormatRgb was renamed to qPixelFormatRgba to explain the third
argument at the call site better.
There seem to be no users of this class in qt5.git at this time.
Change-Id: Ib4fe8ceb2d30744127b116a748724a3406400eb8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It isn't a thorough check of all the mutable methods for detaching, but a start.
Change-Id: I523fd30d3459186654e12fd25c384ed990ab7a00
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
As with many other implicitly shared classes, efficient move semantics
requires setting the d-pointer to nullptr, which then needs to be checked
for in the dtor and the copy assignment operator.
Change-Id: I654d181a1dfdd9a16e2f9fb96b57475cdd0b4561
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
A simple convenience class providing a QWindow that has a
paintEvent and supports opening a painter on itself. It
behaves exactly like QOpenGLWindow in this respect, which is not
surprising since they share the same base class (QPaintDeviceWindow).
QRasterWindow does not however have any OpenGL dependencies and will
be present in -no-opengl builds too.
[ChangeLog] Added QRasterWindow, a thin convenience wrapper for a
QWindow on which a QPainter can be opened.
Done-with: Jorgen Lind <jorgen.lind@digia.com>
Change-Id: I37e82720492945d7b85d5f713eea8d5f7556e511
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@digia.com>
[ChangeLog] Added QOpenGLWindow. This serves as a convenience class for
creating windows showing OpenGL content via an API similar to QGLWidget
and without any widget dependencies.
Done-with: Jorgen Lind <jorgen.lind@digia.com>
Task-number: QTBUG-36899
Change-Id: I52e9bc61acb129dbfd3841b3adeffab2dbcf7f05
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
Use sizes relative to the test window size; move windows relative
to the top left point of the available screen geometry.
The test now passes on Windows using a 4K monitor.
Task-number: QTBUG-38858
Change-Id: Ia8d992f2a9bfa1cb1deacaf918ed0cfff7616959
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Remove old message handler hack as we have a new and better api to
ignore warning messages.
Change-Id: Id967b2672fe3e3638db9977500118a19c2afb730
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Support CF_DIBV5 for these images so that transparency is preserved.
Task-number: QTBUG-11463
Change-Id: I51881ae8bfbd05b92abd309766f4da9a7ea26c2d
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
This allows QQuickSystemPalette to listen to palette changes without
installing an expensive event filter on the application object.
Change-Id: I8b693e047d993c444e393d7a714a5709692c3560
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Use SetWindowPlacement() to set the normal position when applicable
as is done in Qt 4.
Task-number: QTBUG-39544
Change-Id: Ia158b968ea15361d9937619f07b56eb8a0312a13
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
This allows QQuickApplication to listen to layout direction changes
without installing an expensive event filter on the application object.
Change-Id: I2d7d8906acecbc092657c4bd918bbdc9aad9744c
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
beginModalSessionForWindow will center the window and ignore
the set geometry. So to workaround this it checks the new value
against the old one and moves it back if need be.
Change-Id: I38bc74c04138992f2e0570fca666414025aeeba8
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
The currently used clipboard chain API has various problems with non-
responsive applications and requires checks for hung/debugged applications when
sending on notifications.
The new clipboard format listener API available from Windows Vista onwards
requires less code and does not have these problems, however the change
notifications now arrive asynchronously.
Change the tst_qclipboard to be able to deal with asynchronous change
notifications.
Task-number: QTBUG-38670
Task-number: QTBUG-33492
Change-Id: I3c49e346a34310431c20f3051d12eaabf330a3ad
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
[ChangeLog][QtGui][QGuiApplication] Add support for -icon command line
argument on X11, add -qwindowicon on all platforms.
Change-Id: Iacc602466699bf634d8b34aab7ed73c83fd9844f
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
