This class belongs to QThreadPool/QRunnable more than to QtConcurrent, so
move to QtCore, where QThreadPool awaits it.
Change-Id: Ibf20288a986593bf779453427c2dae8db1e1423a
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
No compatibility header needed. While this wasn't marked as private API,
it wasn't documented, either.
This is a prerequisite for moving QFuture to QtCore.
Change-Id: I8e986e6e2a22fbe5cf08d0600ec39ae9ae993e20
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Leave the old name as a deprecated typedef; adapt users.
This is a prerequisite for moving QFuture back to QtCore.
Change-Id: I81dcee2c7e6eb234c16f3f42e2415ca0da3dc4f8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
ICC apparently optimises 0 * anything directly to zero, even when it
should be doing a multiplication to conform to IEEE requirements. GCC in
fast-math mode does the same, but that also makes the rest of the
function unreliable, so we try to turn off fast-math mode if we can.
Task-number: QTBUG-22340
Change-Id: I0e3c5f4927b0a6bcb3189bb156c18843fc4b29b9
Reviewed-by: Caroline Chao <caroline.chao@digia.com>
In cocoa the timers are associated with main run loop but
the way font and color dialog tests are executed the modal
dialog run loop is only run in cocoa. This causes timers to
not to fire and test cases to hang.
Unfortunately this does not completely fix the test failure
because the QTest::keyClick is not working with cocoa
native dialog helpers and therefore the tests are marked
with QEXPECT_FAIL.
Task-number: QTBUG-24320
Task-number: QTBUG-24321
Change-Id: I88740a20ad2b794b6ca15e1b6455f436ffd39335
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Task-number: QTBUG-27336
Don't check 'widget != m_widget' in
QWidgetWindow::handleDragEnterMoveEvent() since the current window's
parent widget may be the actual drop target. I replace it with a check
'!widget->isWindow()' to prevent we pass through a top level window.
I also change 'widget->mapFrom(m_widget, event->pos())' to
'widget->mapFromGlobal(m_widget->mapToGlobal(event->pos()))' since m_widget
may not be widget's parent.
Change-Id: Ia4f10f85ccdf1e27223ddc51afabd98b5d16f2fb
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Expecting results were not correct. The test is passing.
Task-number: QTBUG-22362
Change-Id: Ie41c262019f76aace9062d7897d7934dc7437c3a
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
The entire test is currently skipped while only the last part is
causing problems.
Move the out of memory test code to its own test function and skip
only this function with the appropriate bug number. By allocating too
much memory this test is causing a crash.
Task-number: QTBUG-27361
Task-number: QTBUG-22342
Change-Id: Ia308099b7f12cf2c567b62063a7bbcc6fb38515b
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
According to the repo history the tailFile was introduced with the
S60 port but the functionality it's testing was never implemented.
Task-number: QTBUG-22341
Change-Id: I16e8e43bbd799f05f8b136925cb0add0b918289e
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
It is time to clean up some of our legacy code. These styles have
not been actively maintained for a long time and I think it is safe
to say that they should no longer belong as part of the default
distribution of Qt. We dont support any platforms based on CDE with
our source packages.
Note that even if we are removing these styles from the default
distribution of Qt, applications that depend on them
will still be able to bundle the existing (and unmodified) styles
along with their own source code as we are not breaking compatibility.
Change-Id: I1709630c20ba8e8088cd01628628d86856db57a4
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
Use PlatformClipboard::isAvailable() and omit relevant test
cases when QT_NO_CLIPBOARD is defined.
Change-Id: I7e7b20a0a18f1a82987564f0e5e6c76d9207bc4b
Reviewed-by: Caroline Chao <caroline.chao@digia.com>
Use PlatformClipboard::isAvailable() and fix build
when QT_NO_CLIPBOARD is defined.
Change-Id: I18c3af42fe39cf7618c2530723149848a10db985
Reviewed-by: Caroline Chao <caroline.chao@digia.com>
QMetaType has a way to "switch off" some types from the build.
QtMetaTypePrivate::TypeDefinition<T>::IsAvailable is defined as false
for all unaccessible types. Sadly that information was never used by
gui and widget handlers. The patch implements it.
Change-Id: Ie5835be4c88cfbbca8a4e9199e31ddfc20cae190
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Reviewed-by: Jing Bai <jing.bai@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The back-end might report screen orientation changes at any point and we
record it in screen.d->orientation. However QScreen::orientation()
returns the orientation filtered according to the mask.
Changing the mask sends a notification to the back-end, which might send
another update as a result of a possible subscription to system services
(accelerometer). However on platforms where no subscription is required, where
the platform plugin ignores the mask and always sends the latest orientation,
we should "simulate" the update by updating the filtered orientation according
to the new mask. The function is cheap to call as it won't emit any signals
unless the orientation actually changes.
This patch also adds missing flush() calls after handleScreenOrientationChange
calls in the tests to ensure that the (synthetic) window system events are
actually delivered to QScreen/QGuiApplication.
Change-Id: Iebdd050f947e658ff5bc388629aa4cb31ab497fe
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Reviewed-by: Laszlo Papp <lpapp@kde.org>
Commit ef2efafcc6 introduced a call to
QWindowSystemInterface::sendWindowSystemEvents() in
QGuiApplicationPrivate::init(), which in its implementation ends up calling
sendPostedEvents() before flushing and processing any pending (internal) window
system events.
This patch changes the call in init() to use
QWindowSystemInterface::flushWindowSystemEvents() instead, which is more gentle
in that regard.
The provided unit test verifies that no posted events are processed during the
execution of the QGuiApplication constructor while at the same time verifying
what the original changed tried to do: Allow a generic plugin to provide window
system specific defaults that are implemented using the event queue of
QWindowSystemInterface.
Task-number: QTBUG-26886
Change-Id: I129a907c00d947df60fe1a02efc67857580fce24
Reviewed-by: David Faure <faure@kde.org>
This fixes a regression introduced in Qt 4 commit
e855b199319c932f2e9500235775f961bc32e41a.
The problem was that by handling the wheel event in event()
instead of wheelEvent(), we lack the guard clause in QWidget
that doesn't even call the handler if the widget is disabled,
and the code didn't handle this itself.
Fix by reimplementing wheelEvent() instead, which we can now
do because we can break BC.
This commit just moves the code. Another commit will clean
up the implementation of wheelEvent().
Task-number: QTBUG-27308
Reported-by: chenjiexin
Task-number: QTBUG-21534
Reported-by: Martin Koller
Change-Id: Ibe6b89a81fe889f839c205b859a1492b39a4ddc3
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
CUPS paper sizes may differ from Qt paper sizes slightly and thus fail
the strict comparison in qprinter tests. This is needed for the
followup patch which initializes the cupsplugin with CUPS/PPD defaults.
Change-Id: Ie66f77ead0204de0fc7c7913005fa516d57d34eb
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Use QStyleHints::showIsFullScreen() where necessary.
Notice that QWidget::show() already calls showFullScreen()
if appropriate, and Qt::X11BypassWindowManagerHint doesn't
do anything in the XCB platform plugin.
Change-Id: Ib8f61188c075170d646894388561cbb3f72daee8
Reviewed-by: Caroline Chao <caroline.chao@digia.com>
Commit 5230d62fe added a #define NOMINMAX, which conflicts with a
NOMINMAX definition in the MinGW headers. Just use the same definition
as in MinGW to fix the gcc warning.
Change-Id: Ib21dd323ebbdca5d143e394c7631303e0c72541a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
While the large data block can be written to a file, the test is
also showing instability while reading back the written block.
Adding another expected failure to address this instability.
Task-number: QTBUG-26906
Change-Id: I9704d441cf2bd6d7ef0f9023240ea61bb89561b6
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Moving more logic into the protocol and framework, easening
the burden on the autotest implementation.
Implementing several new features in the server and
report, like fuzzy matching and static baselines.
Change-Id: Iaf070918195ae05767808a548f019d09d9d5f8c0
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
WinCE does not have setlocale, used SetUserDefaultLCID correspondingly
as it is done in qstring autotest for WEC7.
Change-Id: I7866bf0f365c7c6efbf3b439cdd9a281c6a1b2e0
Reviewed-by: Kevin Funk <kevin.funk@kdab.com>
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
The old code masked out write flags before returning permissions
from permissions() or data(FilePermissions) in order to force
QFileDialog to disable the rename and delete actions. This was to
fix Task 143519, but introduced QTBUG-20503.
Instead, revert to the pre-143519-bugfix code and do the necessary
check in QFileDialog directly.
Also add a testcase for 143519.
Reported-by: Gilles Pascual
Task-number: QTBUG-20503
Task-number: 143519
Change-Id: I140109341c0ed40722e3aac4327c2a740fb014c2
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
A simple heuristic is used to detect the word beginning and ending by
looking at the word break property value of surrounding characters.
This behaves better than the white-spaces based implementation used before
and makes it possible to tailor the default algorithm for complex scripts.
BIG FAT WARNING: The QCharAttributes buffer now has to have a length
of string length + 1 for the flags at end of text.
Task-Id: QTBUG-6498
Change-Id: I5589b191ffde6a50d2af0c14a00430d3852c67b4
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
The test has lots of failures, so mark these with QEXPECT_FAIL and
remove the QSKIP.
Task-number: QTBUG-22310
Task-number: QTBUG-27274
Change-Id: I0d38cedb581741b6edae5d1c3f4410714099a7fb
Reviewed-by: Caroline Chao <caroline.chao@digia.com>
Remove QSKIP("Not yet sure why this fails."), the test is passing
on Mac.
Task-number: QTBUG-22321
Change-Id: I5f09d067b1cc837c5e3ada5bbd34091fe1fd723d
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
The current check is not enough to catch the unstable failure.
Update the test to catch the failure in all cases.
Task-number: QTBUG-26906
Change-Id: I2e37a1f6513df768cd410df7c91a9fd843150e57
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
The test is passing on Ubuntu 11.10.
Adding qWaitForWindowExposed after the line edit show() call to ensure
the line edit is actually shown on the screen.
Task-number: QTBUG-24518
Change-Id: I2af65bef76d171b36032120738dfbd7cfff51d7f
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Member variables for lastSeparator, first and lastDotInFileName are now
initialized to -1 (non-existing), where the previous value of zero would
mean a separator/dot at that position and resulted in path() returning
'/', instead of '.'.
Tests were expanded for better coverage of empty state and
default-constructed instances.
Change-Id: Ie27547886b52224d38b5be0b4f920c9927fd440f
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Added some test cases that check that moc
correctly expands #defines
Change-Id: I7fe6eed129d46ca9281d73064571cae43b32410d
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This method was originally intended for refreshing rows after
submitting changes. It should also work for refreshing rows
that are unchanged (i.e., not cached), but did not because
constructing the primary values depended on the cache. As a
consequence, the WHERE clause for the query was not created.
Fixed by deriving primary values for uncached rows from the
query record. Note that the cache is still authoritative for rows
it holds. This is important because the prmary values there may
differ from the original query record due to changes to columns
of the primary key.
Includes new test.
Change-Id: I41cca2cbf26019d4b495ffa6d876e2b55ec57803
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Added a test for QMacCocoaViewContainer which will enable the testing
of the fixes coming
Change-Id: I73e9540bc58411634f0da7d398eca4b7ffafba8e
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
The test is not hanging on Windows anymore.
On Windows, add an expected failure for the failing case.
Task-number: QTBUG-22801
Task-number: QTBUG-27306
Change-Id: Iede95766504f3e8a278a4554a5967ca333aae3bf
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
The private method is called in several places in QListViewPrivate,
but before this patch, the implementation in QAbstractItemView was
called. This meant that the options were not set properly,
resulting, for example, in icons in icon mode being laid out in
list mode (on the left and small).
This is a regression resulting from
8eab9cbce2 and
3578e05b29. Other views are not
affected in a similar way.
Change-Id: I753cb99410e367266753eaf2fa43361b9212ab96
Reviewed-by: Pier Luigi Fiorini <pierluigi.fiorini@gmail.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Negation operator ("!") have precedence over bitwise and ("&").
Change-Id: I39e2d99da6eaa4477bbe35a1259f745e05c9841a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is an automated change performing the following replacements:
join\("(.)"\) -> join('\1')
join\(QLatin1String\("(.)"\)\) -> join(QLatin1Char('\1'))
join\(QStringLiteral\("(.)"\)\) -> join(QLatin1Char('\1'))
Change-Id: I81c378ef6aeeada5e116f1394cc9fc67f901ffd6
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
This test actually passes using the "xcb" platform and fails otherwise.
Second, the Jira task is misleading since it refers to
tst_QFocusEvent::checkReason_Shortcut()
Change-Id: Icab91ace8c214d958b534c5cebae900242522372
Reviewed-by: Caroline Chao <caroline.chao@digia.com>
Use the native parent's window if the widget in question does not
have one. This should be in line with Qt 4.8 using effectiveWinId().
Remove redundant code in grabMouse(QCursor).
Change-Id: Id6ab192e739221fe89f865f4d2f7a6d4671a190b
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
QAIM::createIndex() took either int or quint32, but QMI::internalId()
returned qint64.
In the new interface, createIndex() takes, and internalId() provides,
integers of type quintptr.
This matches the storage size of the void* in the model index and
avoids truncation.
Remove the
createIndex(int, int, quint32) and
\obsolete createIndex(int,int,int)
overloads.
This makes a literal 0 in the third parameter ambiguous now.
The solutions have been noted in changes-5.0.0.
Change-Id: I0a0ecd8430eaf695129a4d09d14d4e30745485c4
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Change copyrights and license headers from Nokia to Digia
Change-Id: If1cc974286d29fd01ec6c19dd4719a67f4c3f00e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Introduce QCharAttributes and use it instead of HB_CharAttributes everywhere in Qt
(in Harfbuzz, the HB_CharAttributes is only used in the text segmentation algorithm
which has been moved from HB to Qt (well, most of it)).
Rename some members to better reflect their meaning,
remember to keep HB_CharAttributes in sync with QCharAttributes.
Also replace HB_ScriptItem with a (temporary) QUnicodeTools::ScriptItem struct
that will be replaced with a more efficient/friendly solution a bit later.
The soft hyphen and the mandatory break detection has been factored out
of the default text breaking algorithm to a higher level in order to refactor
the QCharAttributes bitfields and to optimize the implementation for the common case.
Change-Id: Ieb365623ae954430f1c8b2dfcd65c82973143eec
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
This test is crashing. Specify the bug report number in the QSKIP
message.
Task-number: QTBUG-22343
Task-number: QTBUG-27285
Change-Id: I4d4ead4f54944a545103a3d01c5c9d302d7fb1df
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Garbage libs (under elftest) are numbered from 1 to 5 and not from 0 to 4.
Change-Id: Ia0162372bf5cd1fb53a0442543c5a65716880611
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
A modal window in front in the modal window list should never be blocked
by a modal window further back in the list. This was taken care of in
QGuiApplicationPrivate::isWindowBlocked(), we just need to make sure it
gets called when a new modal window gets shown so that its blocked
status is up to date.
Task-number: QTBUG-27206
Change-Id: I590f1715e66067edb178081352636f34fe54a885
Reviewed-by: Tim Jenssen <tim.jenssen@digia.com>
Shows property values in fields which auto-update when the properties
change.
Change-Id: Ib97566a74cb8d0fff5f85bf97783e89dfb07481f
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
The style hint SH_ScrollView_FrameOnlyAroundContents was currently
being ignored by QAbstractScrollArea. This looks like an accidental
regression following 10c6f015f4.
This code path does not execute on mac so it should have no impact
on that patch.
Change-Id: I78ca0a6b87dfdd7d426acbb3ef49480390211af2
Reviewed-by: Christoph Schleifenbaum <christoph.schleifenbaum@kdab.com>
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
A horizontal line should round up at the same time as a vertical line
with square cap, when rendering at subpixel coordinates. Thus, the
special casing in the cosmetic stroker of offsetting by half a pixel
should be for flat caps instead of for square caps.
Task-number: QTBUG-26013
Change-Id: Ic09249337f814c7de95a17976ec9e651561a744b
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
The QShortcutEvent constructor takes "int shortcutId" as its second
argument, not a bool. Since the default shortcutId is 0, this test
passed, since false == 0.
Change-Id: I43bbae4613f3badb1578dccec76dcdd3c96a3a2f
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
QWidget's mapToGlobal() and mapFromGlobal() functions assumed that
if the widget reports it's a window or if it has no parent widget, it
must be a top level window whose coordinates are in global coordinates.
This is not true for child QWindows or embedded native windows
(QAxWidgets).
Changed the logic for mapping coordinates to use equivalent methods
from QWindow if widget has a window handle, and changed QWindow's
methods to map coordinates using native methods if window is embedded.
Also fixed newly failing accessibility autotest. The geometry related
failures there popped up because now the position of the rect returned
by accessible interface is actually correct while widget geometry still
reports position 0,0 before widget has shown up.
Task-number: QTBUG-26436
Change-Id: I658fafd0ce01eb1604ba255efeeba3073ca0189f
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
Disable SSL compression by default since this appears to be the a likely
cause of the currently hyped CRIME attack.
Change-Id: I515fcc46f5199acf938e9e880a4345f2d405b2a3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Peter Hartmann <phartmann@rim.com>
"HTTP/1.1 100 CONTINUE\r\n"
If the header from a server is splitted between two packets
the first packet contains "HTTP/1.1 100" and the second one
contains " CONTINUE\r\n", one space (0x20) is skipped. After
processing the line looks in this way "HTTP/1.1 100CONTINUE".
QHttpNetworkReplyPrivate::readStatus(QAbstractSocket *socket)
is called twice, if a http header is splitted as above.
The function always removes whitespace from the beginning of a packet,
even if it is the second part of a http header.
QHttpNetworkReply returns QNetworkReply::RemoteHostClosedError
due to damaged http header during processing.
Improvement of unit test.
Task-number: QTBUG-27161
Change-Id: Ifc2949f62473209b4032185effbf5078b4130cda
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
The test has one stable failure on Mac OS X, so mark this
with QEXPECT_FAIL and remove the QSKIP
Task-number: QTBUG-22320
Task-number: QTBUG-27230
Change-Id: I7660df5770c39788792068a5b68e8236551288c4
Reviewed-by: J-P Nurmi <j-p.nurmi@nokia.com>
Reviewed-by: Caroline Chao <caroline.chao@nokia.com>
The Blackberry OS uses a filesystem with the noatime option,
which returns a "wrong" access time.
Change-Id: I04cdb899699e819a36e0917e30d750067b33388d
Reviewed-by: Tobias Koenig
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
Reviewed-by: Peter Hartmann <phartmann@rim.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Changing it outside of the test function definition to avoid running
empty/inapplicable test functions.
Change-Id: I713560cde7f715696984ed082d682900f5f1bcdd
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Caroline Chao <caroline.chao@nokia.com>
Create a new QDBusConnectionPrivate for every new connection in
qDBusNewConnection instead of creating a single QDBusConnectionPrivate
in the QDBusServer constructor which gets assigned the latest connected
DBusConnection in qDBusNewConnection (and loses track on all previous
DBusConnections).
Also extend tst_QDBusConnection::registerObjectPeer() test with multiple
connections to the server.
Task-Number: 24921
Change-Id: I4341e8d48d464f3fe0a314a6ab14f848545d65a0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QElaspedTimer is a lot more efficient.
Change-Id: I66d9514108f800a45181d8960b01a5e7d3fa9e80
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The test tries to acquire a semaphore that isn't ready, so it will
timeout. The test is working properly.
The only problem is that 10 ms is too strict. For a wide variety of
reasons, especially since the Qt CI system runs multiple tests in
parallel, the program may not run again in that 10 ms window.
Change-Id: Ic0f684895f73646db5f1cc783fe9ef75fb1ab02b
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Fixed so that empty QDateTime is returned for non existing file.
Fixed also created() and lastRead() to return empty QDateTime for
non existing file.
QFileSystemEngine::fillMetaData() returned true for non existing
files. This was also corrected.
Task-number: QTBUG-25811
Change-Id: I523eb99e4405b4b813b2950f85cc646239181d07
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Christian Stromme <christian.stromme@nokia.com>
Redoing 5704cbc462
This can't work, because the define comes from qconfig.h, not qmake.
Skipping initTestCase and cleanupTestCase when QT_NO_PRINTER is
defined.
Change-Id: I2527c018294b7518a4692f2c93da933848640b5d
Reviewed-by: J-P Nurmi <j-p.nurmi@nokia.com>
This test checks the access permissions for '/etc/passwd', however the
filesystem on Blackberry is always read-only
Change-Id: I9299531397d4467287541b04184540ad6e2eae72
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Introduced by 2e0003eda4. We were
missing a attributesEmitted=true which caused the output from
toHtml() to sometimes be invalid when using pixel sizes to
specify the font size.
Task-number: QTBUG-25778
Change-Id: Ied61fcaef425a590d71c0b52292ac676cb88ba52
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Jiang Jiang <gzjjgod@gmail.com>
Exclude printsupport tests from the build when QT_NO_PRINTER is
defined.
Change-Id: Iedae91666a599f4b77250abc8aac14c256fde34e
Reviewed-by: J-P Nurmi <j-p.nurmi@nokia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
The CreationDate entry in the two PDF files can potentially
be different depending on when the test is run. We ignore the
line for this entry when comparing the two results.
Task-number: QTBUG-27171
Change-Id: I8978678295217edd537edb0d2c25260813aa3d93
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Jiang Jiang <jiang.jiang@nokia.com>
QArrayData can point to data it does not own (cf. fromRawData()), which
shouldn't be modified. Not even upon destruction, as this data can live
in Read-Only memory or be otherwise shared outside the QArrayData realm.
Change-Id: I8bdf3050a17802fb003b77d5f543fe31769a7710
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Andreas Hartmetz <ahartmetz@gmail.com>
Bring back code from 4.8 (Note that ALT-TAB is not received
as key event).
Task-number: QTBUG-27146
Change-Id: I6dd2e9c88fdc4c89d26dfaa8ab47deb2be451f25
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Jørgen Lind <jorgen.lind@nokia.com>
The simplePen property was not reset when reusing the QPrinter,
thus we would output two identical setPen() commands in the PDF
making the autotest that compares the results fail.
Task-number: QTBUG-27171
Change-Id: I601042ec59e45ef72a56f230f6112a91a259b4a5
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Jiang Jiang <jiang.jiang@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
this is a monster commit which does the following things:
- import the evaluator as-is from qt creator into qmake/library/
- integrate it into qmake's makefiles
- overwrite proitems.h with actual special types
- remove the parts of Option which are redundant with QMakeGlobals
- make QMakeProperty a singleton owned by Option::globals. the dynamic
handling so far made no sense.
- make QMakeProject a subclass of QMakeEvaluator, with relatively few
extensions
the changes to existing qmake code outside project.* and option.* are
minor. implementing the changes gradually would mean changing a lot of
code which will be just replaced in the next commit, so i'm not wasting
my time on it.
Change-Id: I9746650423b8c5b3fbd8c3979a73228982a46195
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
This test actually passes on Windows, so removing the QSKIP
Task-number: QTBUG-24543
Change-Id: Ic2666665f2882392aec92a665f51d6c5dd3355f8
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
This issue originates from https://bugs.webkit.org/show_bug.cgi?id=95736
Suppose we have
main.cpp
somedirectory/someheader.h -- which has #include "anotherheader.h"
anotherheader.h
With unix generator, the directory where main.cpp is located is included,
unless no_include_pwd is set. Hence the look-up of anotherheader.h from
within someheader.h will work.
With MSVC this works because MSVC looks "in the directories of any
previously opened include files in the reverse order in which they were
opened." (from http://msdn.microsoft.com/en-us/library/36k2cdd4.aspx)
Unfortunately the build breaks with MinGW, because it lacks support for
including the source directory in the include search path just like the
unix generator does.
This patch adds the same functionality to the MinGW generator as well as
an auto-test.
Change-Id: Iea8bb06e34862c51b8fd4eca2ee26668e24a319a
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Reviewed-by: Jonathan Liu <net147@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Remove some subprojects that have missing dependencies or use API that is
non-available on Windows CE.
Change-Id: Iad7118b95a691a433c3f798d56a6a069e5e41917
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Replaced with qt-project.org test domain.
The connectToMultiIP auto test is still disabled due to lack of test infrastructure.
Task-number: QTBUG-23294
Change-Id: Icf01aabb0ae503291abdda4e8f773f8e0a08931a
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This is an automated change performing the following replacements:
join\("(.)"\) -> join('\1')
join\(QLatin1String\("(.)"\)\) -> join(QLatin1Char('\1'))
join\(QStringLiteral\("(.)"\)\) -> join(QLatin1Char('\1'))
Change-Id: I807b0e88ac71a0cb367fb4170cca8f2cb0ad43f3
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Also fixing some includes and re-enabling the test
Change-Id: I4a061e106c2e55db39b8000729737a93e3d7714a
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
This is an automated change performing the following replacements:
join\("(.)"\) -> join('\1')
join\(QLatin1String\("(.)"\)\) -> join(QLatin1Char('\1'))
join\(QStringLiteral\("(.)"\)\) -> join(QLatin1Char('\1'))
Change-Id: I5b75877ba192fa1357e67fee70dff7c0475991e8
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
This is an automated change performing the following replacements:
join\("(.)"\) -> join('\1')
join\(QLatin1String\("(.)"\)\) -> join(QLatin1Char('\1'))
join\(QStringLiteral\("(.)"\)\) -> join(QLatin1Char('\1'))
Change-Id: Ia30048e0c40967dc86a4e4ad26ac02ab67519096
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
According to Qt doc, "Network proxy is not used if the address used in
connectToHost(), bind() or listen() is equivalent to
QHostAddress::LocalHost or QHostAddress::LocalHostIPv6. This is not the
case in current implementation.
Change-Id: I6b8a40c1e8bd8aad9504d8f939b87eda6e93337c
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
It's closer to what we do with in QMutex than pthread_mutex_lock.
Change-Id: I86498a800b69b684bf096912e911bc5bca219727
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The test is now passing. Tested with intel compiler and vs2008.
Task-number: QTBUG-22285
Change-Id: I728919833d9bcbf71bef68c06baef92667ff074b
Reviewed-by: J-P Nurmi <j-p.nurmi@nokia.com>
This corrects the mismatch between using floats for internal storage
and qreal in the API of QVector*D which leads to lots of implicit
casts between double and float.
This change also stops users from being surprised by the loss of
precision when using these classes on desktop platforms and removes
the need for the private constructors taking a dummy int as the final
argument.
The QMatrix4x4 and QQuaternion classes have been changed to use float
for their internal storage since these are meant to be used in
conjunction with the QVector*D classes. This is to prevent unexpected
loss of precision and to improve performance.
The on-disk format has also been changed from double to float thereby
reducing the storage required when streaming vectors and matrices. This
is potentially a large saving when working with complex 3D meshes etc.
This also has a significant performance improvement when passing
matrices to QOpenGLShaderProgram (and QGLShaderProgram) as we no
longer have to iterate and convert the data to floats. This is
an operation that could easily be needed many times per frame.
This change also opens the door for further optimisations of these
classes to be implemented by using SIMD intrinsics.
This needs to be applied in conjunction with
https://codereview.qt-project.org/#change,33548
Task-number: QTBUG-21035
Task-number: QTBUG-20661
Change-Id: I9321b06040ffb93ae1cbd72fd2013267ac901b2e
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The test shows spurious failures in editingFinished() on some Mac
platforms (QTest::qWaitForWindowActive(testFocusWidget)).
This is apparently caused by the widget testFocusWidget (member
variable) interfering with the other tests widgets.
As it is used in one test only, instantiate it on the stack there.
Change-Id: I688cd21a2668d072660658302cf59197abe0b4d8
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
This reverts commit 6b5bbc531b.
Autograbbing mouse shouldn't be done in crossplatform code, as
X11 does this automatically. Windows needs platform specific
solution.
Task-number: QTBUG-26962
Task-number: QTBUG-27039
Task-number: QTBUG-23699
Change-Id: I911df92c4a34deb50b729f50681497046657948b
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
When 2 (February) is entered as the month for (e.g.) 31/Jan/2000 (which
is following the format: "dd/MMM/yyyy"), the day is corrected to 29 but
displayed as its numerical value instead of its short (or long) name.
Task-number: QTBUG-27036 QTBUG-19091
Change-Id: I558ee13b224707d22b26c2ec2c045f96118bd5a1
Reviewed-by: Mitch Curtis <mitch.curtis@nokia.com>
Reviewed-by: aavit <qt_aavit@ovi.com>
When a QDateEdit has its display format set to "yyyy/MM/dd", its day
set to 31 and its month set to 2, it will display 291 as the day until
the cursor is moved or the focus changed. This is because
QDateTimeParser::parse calls sectionSize() for the day section, which
will sometimes return an incorrect size. There are also other display
formats affected by this bug (e.g. long day names).
For example, (in the context of sectionSize()) when text is
"2000/01/31" and displayText() is "2000/2/31", there is a difference
between displayText() and text - text is the previous value and
displayText() is the new value. The size difference is always due to
leading zeroes.
This patch makes QDateTimeParser keep track of the quantity of zeroes
added to each section and then factors this value into the result of
sectionSize() if there is a size difference between text and
displayText().
Task-number: QTBUG-26847
Change-Id: I3823cc41167ec920f742cb6a20d39fc5f433c915
Reviewed-by: Mitch Curtis <mitch.curtis@nokia.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dietrich-de@nokia.com>
Reviewed-by: aavit <qt_aavit@ovi.com>
The TRUE and FALSE macros are obsolete and should be replaced with
true and false (all lower case) respectively.
Change-Id: Iee352e8173500683e6319be0abbf5bacf29016e0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Do not compare a QString to QString(). Instead use the .isEmpty() method.
Change-Id: I8bb5e64563bf173abe7288bb9e35375bee1fe445
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When QTextLayout is used in a QTextDocument, many code paths use
special caches and thus greatly outperform the raw QTextLayout version
that operates directly on a QString.
This patch brings some of these optimizations also to the raw version.
We now also use a QFormatCollection in such cases and enable the
functionality of QTextEngine::indexAdditionalFormats() and
QTextEngine::resolveAdditionalFormats(). Thanks to that, we can greatly
speed up QTextEngine::format(), which now uses an amort O(1) hash table
lookup instead of a O(N) linear search.
The added benchmark shows a gain in the order of one magnitude:
./tst_bench_QText formattedLayout:long-many
before applying the patch:
378.19 msecs per iteration (total: 37,820, iterations: 100)
after applying the patch:
25.80 msecs per iteration (total: 2,580, iterations: 100)
Note: This change is source-incompatible for applications using the private
QTextEngine API.
Task-number: QTBUG-8389
Change-Id: Ifcf7a8902a394428979ea06a6d955f886ee739c7
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Otherwise the containers might be forward declared in the moc file,
and when the moc file is compiled in a standalone translation unit,
the full definition of it would not be available. This results in
odd compile errors, so instead generate the includes if required.
Change-Id: Ie01c5a5d45314daad0b00dec03b3e1e18cdbae64
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Volker Krause <volker.krause@kdab.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This is an automated change performing the following replacements:
join\("(.)"\) -> join('\1')
join\(QLatin1String\("(.)"\)\) -> join(QLatin1Char('\1'))
join\(QStringLiteral\("(.)"\)\) -> join(QLatin1Char('\1'))
Change-Id: Ie395d82d17710683968d006d22de313ef49dc6e5
Reviewed-by: Harald Fernengel <harald.fernengel@nokia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
This overload avoids the needless heap allocation that the traditional
overload incurs due to the implicit QChar -> QString conversion
involved there.
In order to share the implementation between the two overloads,
QStringList_join now takes the separator as a (Char*,int) tuple
instead of as a QString.
Change-Id: I92961f13a3f19099de2a6e2df9f4789a12fc83a0
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This fills the gap left by QWidgetStar, making the sequence
between FirstCoreType and LastCoreType contiguous, which some
benchmarks assume to be true anyway.
Change-Id: I2d5d202b6246a9065fdf77f325a4a04279dbe4b7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We can't have T& declared/registered as a metatype (wont compile), but
using it as type for a slot argument is possible. With the recent
introduction of metatype auto-registration we have to make sure that moc
doesn't attempt to auto-register those. Simple types are handled correctly
already, this fixes containers and smart pointers.
Change-Id: Id96857c57d6ebf158a67e9d527c89dc195473b1b
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
QStyle::standardIconImplementation() & layoutSpacingImplementation()
are removed, and standardIcon() & layoutSpacing() made pure virtual.
Change-Id: If8ab6cfef0b639b7973be22dd630ba3e6f39a225
Reviewed-by: Gabriel de Dietrich <gabriel.dietrich-de@nokia.com>
The test has one unstable failure on Windows, so mark this with QEXPECT_FAIL
Task-number: QTBUG-26906
Change-Id: I2f6c63ddefecacd224d93f83e6951e961a02a051
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
When calculating the maximum height / width which a QGraphicsView can display,
make sure we only take the scrollbars' dimensions into account if their policy
is set to Qt::ScrollBarAsNeeded:
- if the policy is set to Qt::ScrollBarAlwaysOff, the scrollbar will not be
displayed at all
- if the policy is set to Qt::ScrollBarAlwaysOn, the scrollbar's dimensions
have already been substracted from the available space by
QAbstractScrollArea::maximumViewportSize()
Task-number: QTBUG-14711
Change-Id: If5d24b41dbe7b089abca2bf61ccbd370d4de79a1
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
Try to find a target widget that accepts drops; ignore the event
if none can be found. Split the handleDrag*() functions
to reduce indentation.
Add an autotest.
Task-number: QTBUG-22987
Change-Id: I516ac5f0c002caaf83c52ac16f821246e565230f
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Doing element-wise insertions for the full range of the test made
testing under valgrind extremely slow. When a reallocation is detected
we now resize() the container close to capacity(), while verifying this
doesn't unnecessarily re-allocate either.
Change-Id: Idf7015cf390e366fe444e7ca14c904a2d54ff48b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Follow-up to 83c9ebbd66.
Consider the case where calls to the reset methods on the same object
are nested as in the following sequence:
1. beginResetModel()
2. beginResetModel()
3. endResetModel()
4. endResetModel()
In such cases, only the outermost calls, i.e., 1) and 4), should emit
signals.
After 83c9ebbd66, 1) and 3) emitted the
signals, which is wrong. This is corrected by keeping track of the
nesting level.
Such sequences can come about when a base class calls the begin/end
methods between the calls made by the subclass.
QSqlTableModel::select() is an example of this.
Test included.
Change-Id: Ia62b45cb1abaab00a32bb8357de4a958bcff83e5
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
After setting the printer name the initialization is no longer done for
a printer with a name. Instead doReinit() method is called to preserve
the orientation (set with setOrientation() method before calling
setPrinterName()). Before the orientation was changed back to default
when setPrinterName() method was called ignoring the orientation set.
Updated also the autotest because the case:
taskQTBUG4497_reusePrinterOnDifferentFiles() is no longer expected to
fail on Windows.
Task-number: QTBUG-26008
Change-Id: Ia6bc9ae14d79a646e61bfc97652f9f5af90738b3
Reviewed-by: Andy Shaw
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Both insert and replace have this overload, so one reason to add it
to append(), too, is consistency. But I can also make good use of
this overload in the the new QStringList::join(QChar) overload, so
it's actually useful in its own right.
Change-Id: Iccd48f9cb84831399e4db7e3e78eba25c0ced30d
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If you had a QTreeView with expandable items, if you tried to expand and while
the animation was still running you'd try to collpase the node,
the display would be completely broken: the items below that items would
not be visible any more except for a fraction of a second when expanding
or collapsing it again.
The problem is in the fact that when starting an animation the QTreeView
stores the state before animating. And it does that even if an animation
is already running. So the stateBeforeAnimation becomes AnimatingState and
when the animation finishes, AnimatingState is the state that is restored
breaking the painting.
Unit test is included.
Change-Id: I015212c1ed8962e6df705655099a5660f195caf3
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Previously QImage::fill() for Format_RGB888 expected a BGR value
instead of the RGB order defined by QRgb, making it counter intuitive to
use related to the 32-bit formats.
Fixed the QPixelLayout data for RGB888 and changed the byte order of
quint24 based on what the optimized image conversion routines expect.
Change-Id: I72926debbc6f5b5cb10b8aa0b2a2a916a04db946
Reviewed-by: Kim M. Kalland <kim.kalland@nokia.com>
When a parent item had its visiblity toggled, then the child item would
not update if the parent item had ItemHasNoContents and
ItemClipsChildrenToShape set. This is a common use case in declarative as
the root item has ItemHasNoContents set.
Task-number: QTBUG-26846
Change-Id: Id6592ebc4ba2caa4331a4a71f7247e40993131b6
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Add SslProtocol enums TlsV1_1 and TlsV1_2 and use the appropriate OpenSSL
methods when they're selected (TLSv1_1_client_method, TLSv1_2_client_method,
TLSv1_1_server_method and TLSv1_2_server_method). This allows us to
explicitly use TLS 1.1 or 1.2.
Task-number: QTBUG-26866
Change-Id: I159da548546fa746c20e9e96bc0e5b785e4e761b
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
This function only makes sense on a developer build. In non
developer-builds you get:
tst_qtextboundaryfinder.cpp:116:13:
warning: ‘void generateDataFromFile(const QString&)’
defined but not used [-Wunused-function]
Change-Id: Id1bda2d27b00048f7401606959b566a59c05b38d
Reviewed-by: Toby Tomkins <tjtomkins@gmail.com>
If setQObjectShared crashes because a QObject is tracked by two
different QSharedPointers, we lose the debug feature offered by #defining
QT_SHAREDPOINTER_TRACK_POINTERS, as the check done by this define
happens after the setQObjectShared call.
Therefore, move setQObjectShared after the internalSafetyCheckAdd call.
This is actually a noop change in 5.0, as setQObjectShared does nothing.
However it prevents a bug in case the Qt 4 behaviour is brought back
in some later version.
Change-Id: I71340d0f878828354537762d01c46d441efc918c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This works similarly to the automatic registration for Q_PROPERTY types,
but in this case it mostly affects the need for users to
call qRegisterMetaType<T>() before using queued connections
with methods using non-built-in metatypes, or before using invokeMethod
manually.
Change-Id: Ib17d0606b77b0130624b6a88b57c36d26e97d12d
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
In Qt 4, the user needs to call qRegisterMetaType if the property
could otherwise be read before the type is registered with the metatype
system. This patch makes that unnecessary and automatic by registering
it when the first read indicates that it is not yet registered instead
or when QMetaProperty::userType is called before it is registered.
The types which are automatically registered exclude the built-in
types, which do not need to be registered, and include metatypes which
are automatically declared, such as pointers to QObject derived types
and containers of existing metatypes.
Change-Id: I0a06d8efdcb64121618e2378366d0142fa0771f5
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
In Qt 5, when streaming an invalid QDate using a QDataStream version
earlier than Qt_5_0, QDate.jd is written and read as 0, which is an
invalid julian day for Qt versions earlier than 5.0. For Qt 5.0
however, 0 is a valid julian day, so when comparing a deserialised
invalid date (read using a QDataStream version < Qt_5_0) against a
default-constructed invalid date, they won't compare equal when they
should.
Task-number: QTBUG-26989
Change-Id: Ia76df493471f3b068c7d7187be20e3178eff2cc7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change d060b6f04f introduced some
new properties to QTextFormat which were unfinished and did not
match the documentation in the same change. I've updated the API
and docs to use the regular QFont enum for letter spacing type
instead of introducing bools (which inhibits expansions later)
or mutually exclusive properties in the text format.
Change-Id: Ife44993b6746c413e421fdaf92ebaaab6ba95977
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The Qt::KeypadModifier modifier is internally masked away from all
shortcuts. So it is not possible to set a keypad only shortcut.
Changed the implementation so that first a full keysequence match is
searched. Then if no match is found the same sequence is tried
without the keypad modifer.
Added a autotest for this also to cover the basic use cases relating
to this.
Task-number: QTBUG-20191
Change-Id: Ibe7740c705fd0ab1eece4809b9a0b48882172933
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
While writing the test, I found that moc doesn't yet support
volatile slots. I left the tests in, commented, for a time
when it does.
Change-Id: Ib5fa00b25600618aedcc66739630054f3c879b99
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This only works with the C++11 contextual keyword
directly, the MSVC equivalent 'sealed', or the Qt
define for it.
While this isn't a problem for syncqt, being an
internal tool, moc should eventually be able to parse
user code using local C++11-final-wrapping macros.
For this, I guess moc would have to be taught to
expand macros in code and not just test #if clauses,
potentially driven by something like
#pragma qt-moc expand-this
#define MY_FINAL_CLASS final
but that's something for someone more intimately
familiar with moc's source than I am.
Change-Id: Id6aec961a881e8d5a9b76a7fc8e1c02c71913f64
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This detected the same missing detach()s in QUrl::resolve.
Everything else works, no need for a mutex in Qt5's QUrl.
Change-Id: I0da51b7b0c6b810d314a26d4b638383cd17de12b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QTextEdit showing long lines using lots of text format (for example
with a syntax highlighter) used to expose a quadratic behaviour which
make it impossible to edit files with long lines.
It was fiexed in the few previous commit
Task-number: QTBUG-8389
Change-Id: Ib7203497a7699a85ae1dfb70fe65d5fb36884b58
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Just to make it clear which two sections go together.
Change-Id: If3724d1c84172a61bdd7931cc567f4b7140d4f8a
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Introduced during Qt5 development and renamed to QInputMethod.
Change-Id: If6744648dc98b779e65c449ae32626db574181df
Reviewed-by: Joona Petrell <joona.petrell@gmail.com>
availableMibs() unconditionally adds 2107 to the list of mibs. The patch
ensures that codecForMib() also knows about this special TSCII codec.
(Note that the autotest only really checks this code path if only this
test case is run. The other tests already fill the internal codec cache
otherwise).
Change-Id: Id987d7cecd5f5700cca75e9b85b37011f8e5c622
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
@p replaced by \a, \QD replaced by {Qt Designer}, couple of enums etc.
Change-Id: I315510690bf52e42db519292b4122fa24c73bbc9
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
Task-number: QTBUG-26540
Change-Id: I1c365aeb013f5ddedd0589aa4c4844be759a3882
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
They used to always return indexes in column 0.
Change-Id: I2cf4239e0a975b37548de00a1deb916fcd88b4c7
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Commit 7808ec79 changes QApplication to synthesize
mouse events from (unhandled) touch events.
On Mac OS X this creates a conflict for two-finger
scroll swipes, which generates both touch events and
mouse wheel events: scrolling in QTextEdit will also
select the text.
Add a SynthesizeMouseFromTouchEvents platform style
hint that enables the event synthesising. Set to true
by default and false in Cocoa.
Change-Id: I1ffa5a141476aa38b81ce92a87eff676c7ec2276
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
The current implementation of qIsNull only returns true if the value is
positive zero. This behaviour is not useful for use cases like
QPointF::isNull, where QPointF(-0, -0).isNull() will return false.
There doesn't seem to be a reason why the function exhibits this
behaviour (-0.0 is not accounted for in the unit tests), and for the
case of QSizeF::scale it causes a bug: qIsNull is used to check for
division by 0.0 before it proceeds, which fails in the case of -0.0.
Task-number: QTBUG-7303
Change-Id: I767e5280bd26614e8e78ae62b274eb9bc4ade385
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
Size constraints set on a widget before the creation of
the QWidgetWindow were lost (for example, Qt Creator's
preference page).
Task-number: QTBUG-26745
Change-Id: I7c2f5aed9c8817795603e5ad3c24418d66627bab
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: hjk <qthjk@ovi.com>
"The documentation states that "secsTo() does not take into account any
milliseconds", however, this is not the case. Given times 12:30:01.500
and 12:30:02.400 secsTo returns 0. If milliseconds are not taken into
account, I would expect this to return 1 (i.e. interprets the times as
12:30:01 and 12:30:02 thus truncating the milliseconds)."
Note that tests were also written for QDateTime::secsTo(), as it uses
QTime::secsTo internally. This addresses Javier's issue in the
comments of QTBUG-9304.
Task-number: QTBUG-9304
Change-Id: I9efe0c8f710db859c1d086d67ba3e5b349a56c4e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QDateTime currently serialises its private Spec enum. If a user was to
deserialise the individual components of a QDateTime separately, the
resulting timeSpec may be invalid when cast to the Qt::TimeSpec enum.
E.g.:
QDateTime dateTime(QDate(2012, 8, 14), QTime(8, 0, 0), Qt::UTC);
// ... serialise
// ... deserialise date, time, spec separately.
// spec == 2, the value of QDateTimePrivate::UTC.
// spec != UTC, will be set to LocalUnknown.
QDateTime deserialised(date, time, spec);
This patch serialises QDateTime objects in UTC and the value of
timeSpec() as opposed to QDateTimePrivate's spec. This changes the
serialisation behaviour of QDateTime for version 13 of QDataStream.
Task-number: QTBUG-4057
Change-Id: If650e7960dca7b6ab44b8233410a6369c41df73a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The asymmetry is intentional: the getters can use toLatin1() because the
called functions, with a QUrl::FullyEncoded parameter, return ASCII
only. This gives a small performance improvement over the need to run
the UTF-8 encoder.
However, the data passed to setters could contain non-ASCII binary data,
in addition to the percent-encoded data. We can't use fromUtf8 because
it's binary and we can't use toPercentEncoded because it already encoded.
Change-Id: I5ecdb49be5af51ac86fd9764eb3a6aa96385f512
Reviewed-by: David Faure <faure@kde.org>
Just in case someone (like me) changes the function signatures or adds
new functions.
Change-Id: I1025fea012d95ffe89acaf799aa58fd2b0babc80
Reviewed-by: David Faure <faure@kde.org>
QDateTime will attempt to convert unknown types of date to UTC time, which isn't
exactly a fast process. As we don't care about local timezones in the process of
sorting (as this is purely for ordering, not display to the end user), we can
force the dates to use UTC time, avoiding the unnecessary local timezone lookup.
This also adds a benchmark covering this case.
Benchmark results, Qt 5:
- before: 11, 489ms
- after: 273ms
Qt 4.8:
- before: 20, 848ms
- after: 278ms
Change-Id: I87fa6260e820b5b172d3306ff395dafe767c33ff
Reported-by: Thomas Perl <m@thp.io>
Reviewed-by: Alberto Mardegan <mardy@users.sourceforge.net>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Windows CE does not have support for GetGlyphOutline.
So addGlyphToPath will not work. QML uses it for their
distance field rendering. One option to bypass this issue
is to use freetype as rendering backend.
Change-Id: I965254344945cbdad771a5d505fb61c1cc2087df
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Task-number: QTBUG-21804
Change-Id: I475166f3f60b1278089baa255ace4e18baeb568e
Reviewed-by: Jani Honkonen <jani.honkonen@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
When a stylesheet was set on a parent widget then in some cases it would
not get applied to all the child widgets. This was because the order of
the children list may have been modified while it was being set on
children. By making a copy of the list we prevent this from being a
problem.
Task-number: QTBUG-26321
Change-Id: Iea6bf72c69a0c39746f7ef5e7893dda5a93ed7e5
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
The listitem width was calculated incorrectly because spacing was
not considered. This fixes the second part of the reported bug where
spacing is set. Added some tests to catch the issue relating to the
reported bug.
Also added a test to check spacing in general.
Task-number: QTBUG-21804
Change-Id: Icc6326bce914264d882a60a9fc0ebe7d2a08dbf6
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
If the selected item is scrolled with keyboard keys the selected item
will go outside the visible area. The scrolling did not take hidden
items into account when calculating the amount to be scrolled.
Task-number: QTBUG-21804
Change-Id: I63da0248cec43be464898f9dc8167e739f00ccd0
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Those are regular, integer types, of 16- and 32-bit width,
respectively. C++11's std::atomic supports them, so we should too.
C++11 also supports wchar_t, but since that type's size can change, I
don't feel like support for it in Qt is pressing.
Change-Id: I945b641c91a8a98be82715f878c382dee58ac98b
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This allows one to write code that depends on these values at
compile-time.
Change-Id: I7d78524ed9c70d4141360496d1d764dcbfa92e62
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The fix for this failing test is not yet agreed to. Disable it to
allow progress with the CI system while the fix is decided.
Task-number: QTBUG-26869
Change-Id: Ia8089b8e66d750353e7c1c69597916af0d042856
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This allows us to remove the odd hacks to get the static metaobject
for the QWidget* metatype.
The QWidget* is still an automatic metatype thanks to the QObject
partial template specialization. It is registered as a metatype
at runtime automatically in qwidgetsvariant.cpp.
Change-Id: Ie01b69eadf2cbe87af1a86c3284550f60dcf9e94
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This is necessary whenever QPersistentModelIndexes are changed. Omitting
it means that views are not able to react to the change, such as QTreeView
clearing its (manually held) QModelIndex cache, and the QItemSelectionModel
clearing the item from its storage.
It is necessary to change a QSortFilterProxyModel test which assumed setItem
does not have any such effect. That test is ported to setData instead.
Task-number: QTBUG-18539
Change-Id: Id7a602f18b9773ba4d11019418de886860d26d3e
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
qUncompressCorruptedData() no longer hangs on QNX 650 and Blackberry OS
sytems.
Change-Id: Id131f9f1c6dcd358c152675c7e29ab937052c1d0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Modeltest asserts before the patch, and passes afterward.
Task-number: QTBUG-26515
Change-Id: I08a89cd5c9c59613badcddbd056a3d0b8fbbca13
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
GCC 4.8 warns:
main.cpp:165:60: warning: ‘type’ may be used uninitialized in this function [-Wmaybe-uninitialized]
app.arguments().at(3).toInt());
^
Change-Id: Ib0f6847031437b588e14c6708fdddea5fd474b58
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
The bug is that the connection to emit that signal can be made
obsolete if the connection is made too early and the model is replaced.
In the bug report, the connection is made by calling view() early (thereby
causing the creation of a view and a QItemSelectionModel which operates on
the built-in QItemSelectionModel, and then connecting to that
QItemSelectionModel), and then when QComboBox::setModel() is called later
the built-in view creates a new QItemSelectionModel for it. The bug was
that that new QItemSelectionModel is not connected to. This patch fixes that
bug.
Task-number: QTBUG-4454
Change-Id: Ibbdb8731f16ab071008b4a19dc2cc7ae03cebc84
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
There are some security issues with undo/redo. User should not be
able to get the erased password back in any situation. Therefore
redo must be disabled completely and undo is limited only for erasing
previously entered text.
Task-number: QTBUG-14226
Change-Id: I2b38aca84adbad1c14db76b56ad6303d56b35b4d
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Task-number: QTBUG-26687
Change-Id: Iaa0197efe64c61505e22e4a63a1f5c012af0bc78
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
GCC 4.8 warns:
src/testlib/qtestmouse.h:219:67: warning: ‘popupMenu’ may be used uninitialized in this function [-Wmaybe-uninitialized]
{ mouseEvent(MouseClick, widget, button, stateKey, pos, delay); }
tests/auto/widgets/widgets/qtoolbar/tst_qtoolbar.cpp:862:12: note: ‘popupMenu’ was declared here
Change-Id: I19cfd1790fbd948e97bf740d4412ccf3bb98a330
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
A new class called QAccessibleTextWidget was added.
This class should implement all methods of QAccessibleTextInterface and
QAccessibleEditableTextInterface which only need a QTextCursor, and it
defines two pure virtual methods, to obtain and set the text cursor, so
accessible implementations of widgets which use a text cursor can implement
these two methods.
QAccessibleTextEdit is now a subclass of QAccessibleTextWidget and most of
its methods were moved to QAccessibleTextWidget.
This is a forward port of ba5d7d608cc31fc63354fd74d85a1bad7780fc45 from
Qt 4.8, and is a prerequisite for forward-porting QPlainTextEdit
Change-Id: I6093c4fa7e0a77b84de779479c6074db006efec1
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
This is a plugin that bridges the QAccessible world
to AT-SPI 2 on Linux.
Change-Id: I7af22621ee6a3cefc723b137b7f227a611cf6641
Reviewed-by: Jan-Arve Sæther <jan-arve.saether@nokia.com>
This test is doing a brute-force mapping. Coupled with changes to
QCOMPARE last year, this now allocates and deallocates a lot of memory
per iteration. On my Sandybridge, it takes two minutes to run:
111136.781153 task-clock # 0.999 CPUs utilized
371,692,633,238 cycles # 3.344 GHz
182,641,818,708 stalled-cycles-frontend # 49.14% frontend cycles idle
57,951,552,830 stalled-cycles-backend # 15.59% backend cycles idle
477,216,332,971 instructions # 1.28 insns per cycle
# 0.38 stalled cycles per insn
86,959,637,669 branches # 782.456 M/sec
309,185,237 branch-misses # 0.36% of all branches
111.264868818 seconds time elapsed
Changing the iteration step from 1 to 5 reduces the runtime to about 5
seconds.
Change-Id: I9cad6f85f535f472319da7cd6c4aa28e12ddf1b7
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
These projects are expected to fail, but we need to make sure they fail
for the right reason.
Change-Id: I8a7caaa663060712c5c7113ef3b054feba2e2287
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
In the CI system, an environment variable is used to convey
the CMAKE_PREFIX_PATH, but that can not be relied upon.
Change-Id: Ie4fbacaac6ae18f95a3b4d1e796a4b4c91a418c4
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This test has recently timed out in CI, but appeared to be making
progress. Give it more time to complete.
Change-Id: Ied0fb7aad35ed6d5889dd585a7545687617e5e19
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
Task-number: QTBUG-26793
Change-Id: Ic19cb6581cd5838d26713998e152772a5d12da4f
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The newer CMake version has the POSITION_INDEPENDENT_CODE property which is
what we need here. The CMake 2.8.8 implementation uses awkward and incomplete
string manipulation which I don't want to maintain for any amount of time
when Qt 5.0 is released.
Change-Id: If7ace9c6925ccdbf800f1863fa2368e55fa44d7f
Reviewed-by: Brad King <brad.king@kitware.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
These functions are a faster version of {,!}qgetenv().is{Null,Empty}(),
a common pattern in Qt code.
Their main advantage is that they don't need to allocate memory, so
they can be used in noexcept functions, or dynamic initialisation of
namespace-scope statics, because throwing in these contexts invokes
std::terminate().
Change-Id: I651c5bd72f450b5d7df76590f8791572fe992af5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Library code might need to know this, e.g. when calling an external
process, to give it the right configuration. (For instance when
ksycoca code calls kbuildsycoca to recreate the DB at the right place).
Change-Id: I343ddefff816586f9d391973c08ff1e1ad86bf0e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
SRCDIR was not defined for WinCE but it should no longer be used.
Fixed test case to use QFINDTESTDATA instead.
Change-Id: I07cbf7d42790d33e2d205d1682ec10e7577a92bd
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Commit f9a17d7f0f fixed it for the case
where the sender object is in a different thread at transition setup
time. However, it still didn't work if either the sender object or the
state machine was moved to a different thread at some later time,
before the machine was started.
Therefore: Bite the sour grape and traverse all the machine's
transitions when the machine is being started, registering those
signal transitions whose sender objects are in other threads.
This will increase the machine's startup time (proportional to the
number of transitions), but at least it works in all known scenarios,
meaning we don't have to document weird restrictions regarding the
order in which the user's operations have to be done.
Task-number: QTBUG-19789
Change-Id: I5f1dd1321994e49635f52be65cf56d2678ed1253
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
This is consistent with QAbstractButton, QCalendarWidget,
QDialogButtonBox and QGroupBox (ie, all other widgets with
a clicked signal)
Task-number: QTBUG-26105
Change-Id: Ieafe988b5c03216796b69a7cd70ac1a03fc12b0a
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Previously, a QVariant parameter would be wrapped inside a new
QVariant, and you would have to cast the QSignalSpy's QVariant to
a QVariant to get the actual value. This behavior was unintuitive
and undocumented.
Check if the parameter type is QVariant, and copy it directly if it
is. This makes the QSignalSpy's QVariant directly usable (no need to
"unwrap" the value in user code).
Existing tests that use QSignalSpy together with QVariant parameters
(such as tst_QPropertyAnimation::valueChanged()) and do cast the
QVariant parameter to a QVariant, continue to work after this change;
this is because qvariant_cast<QVariant>() returns its input value
(unchanged) when the type is not QMetaType::QVariant.
Task-number: QTBUG-21645
Change-Id: Ibfb171edd60c0d3f7ca1d5419e5c5f3d0380d5b3
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Make the test behave in Jenkins similarly as it behaves in Pulse:
- a test run in Jenkins is not an ad-hoc run
- the JENKINS_HOME environment variable implies we are running in
Jenkins
- the GIT_BRANCH environment variable, set by the Jenkins git plugin,
is equivalent to PULSE_GIT_BRANCH
- there is no equivalent to PULSE_TESTR_BRANCH, since testr is no
longer used
Change-Id: I89ffeec659b4adaab309d8b93ad793ce640029c7
Reviewed-by: aavit <qt_aavit@ovi.com>
The argument has been obsoleted and not documented since 2007. Get rid
of it now before Qt 5.0
Task-number: QTBUG-25089
Change-Id: I91a5508a5e1606f5b5c289501295c67be4abe6a0
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
- Replace SRCDIR define by QFINDTESTDATA, simplify code.
- Introduce a test for stdout mode that verifies the newline
convention.
- Use a temporary directory as not to clobber the
test directory and introduce an environment variable
UIC_KEEP_GENERATED_FILES to keep them for error
analysis.
Task-number: QTBUG-26730
Change-Id: I22e3bb5a9ca92a1977c29b165ea605f1017baa02
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Add new qt_handleXXX functions that forward to the QWindowSystemInterface
functions, and use those in the testlib inline functions. Remove use of
struct QWindowSystemInterface::TouchPoint from the testlib header files
(requiring some slight increase in ugliness in the two tests that use
that struct).
Also remove the qmake hack that adds private headers to all tests
Change-Id: Iec23537e55a44802f6e9cd463f7a0f82007c5250
Reviewed-by: Paul Olav Tvete <paul.tvete@nokia.com>
We need to handle FD_CLOSE separately on Windows as this will be sent
only once. When we get FD_CLOSE we need to check if there is more data
available for reading. It there is this might indicate that there is
another FD_READ that we need to handle after the FD_CLOSE. So in this
case we will manually create another close event.
Task-number: QTBUG-19409
Task-number: QTBUG-25386
Change-Id: Ie19906bc3f64fb6a85a508a5ab12caac5d70ccdb
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Qt 5.0 beta requires changing the default to the 5.0 API, disabling
the deprecated code. However, tests should test (and often do) the
compatibility API too, so turn it back on.
Task-number: QTBUG-25053
Change-Id: I8129c3ef3cb58541c95a32d083850d9e7f768927
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The SCXML spec states that entry order should be equivalent to
"document order" and exit order should be "reverse document order".
Since QStateMachine uses child order for the entry order, the exit
order should be reverse child order.
Change-Id: Ia7b05fdd5c9261ccf202f64f8d23f5c88b20a8c3
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@nokia.com>
Ensure that the parsing mode is cascaded down from setAuthority and
setUrl so that the hostname parsing does not attempt to decode
percent-encoded hostnames when it shouldn't.
Take the opportunity to also remove the "Boolean Trap" from
QUrlPrivate::setHost.
Change-Id: Ia64754c4a4900182700b7af1382aea8410abc7e9
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The URI RFC defines schemes as containing only a very restricted set
of characters, none of which require encoding, so don't even
try. Testing this behaviour in some web browsers indicate that they do
not accept percent-encoded schemes either.
Change-Id: I692dd20e1aac7e8a1bcb276cb5113b5802393d38
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
If the password is empty (but present), the userinfo component of the
URL should end in a colon (":"). QUrl already supported that and it
was tested (case "password-empty").
If the username is *also* empty but present, the userinfo component is
just the colon (":"). Fix support for that case by checking if we
stored the presence flag instead of checking the size of the
component.
Change-Id: Ie224493a997dbf76b2e44dd6d55fd9674ac83c1c
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QString::fromUtf8, without an explicit size, (currently) defaults to
stopping at the first NUL. That means we need to pass an explicit
size.
Also take the opportunity to test that QUrl::toPercentEncoding also
works with the same data.
Change-Id: I79362d67afda624b01ca07b0315b611c4aa3fdda
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: David Faure <faure@kde.org>
QWindow::setWindowState is not supposed to set the window active.
The method requestActivateWindow() should be used for that.
When switching from and to fullscreen mode we're always passing
SWP_NOACTIVATE to SetWindowPos to not change the activation state
of the window. This is inverse to the old behaviour, which did not
have an effect.
Change-Id: I339337935cdad76b3ef252202e92177f37543038
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Add -widgetminimized, -widgetmaximized, -widgetfullscreen,
-windowminimized, -windowmaximized, -windowfullscreen
as command line option to test creation of windows in
these modes
Change-Id: If192c131c8996d3b67648427e5784da47ffee971
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Unloading and reloading a plugin didn't work correctly,
because we didn't reset instance to 0 on unload.
Task-number: QTBUG-26098
Change-Id: Ic3e4497f359b1ca455be949dce9cafa9d67d8039
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QApplication::setActiveWindow doesn't activate the native window but
marks the widget as active inside Qt.
We need to use QWidget::activateWindow instead. See docs.
Also moved the activation call further down because on Windows a
minimized window cannot be activated using the activation-by-focus
fake we're currently using.
Change-Id: I752f6ada1f463931fa9cfb3c35f42dbec0207bfa
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Previously synchronous window system events were
implemented by bypassing the queue and processing
the event immediately. This is not ideal since the
event order is not preserved - there might be "happened
before" events waiting in the queue.
Add QWindowSystemInterface::flushWindowSystemEvents
and change all handleSynchronous* to 1) queue the
event 2) call flushWindowSystemEvents.
flushWindowSystemEvents is almost identical to the
already existing sendWindowSystemEvents with the
exception that it does not call QApp::sendPostedEvents.
Move the common implementation to a new private function.
Task-number: QTBUG-20778
Change-Id: Ie98a83875bc0a14e335e36bed0dd9e0ed4a1dea0
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
The test has a member QWidget *topLevel which it recreates
and shows in init() without waiting for it to be exposed
although it is not used in every test case. This apparently
interferes with some tests that create separate top levels.
Do not show in init(), delete the topLevel.
Add wait to the cases where the topLevel is shown.
Change-Id: Ib428020b36dc82991d41e68478fd583bdfb004c7
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Use QTRY_VERIFY for the mappped attribute check.
Change-Id: I3cbde9122405bf7067f3702193e80636edc8c5c6
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Don't rely on a black list of codecs for the serialization
test. This breaks badly when new codecs get added to Qt
(e.g. through ICU). Instead use a white list of known
codecs that can encode/decode the test data.
Change-Id: I1dc55a25e852198bb935f070a4a21e8369f56268
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use ICU to do code page conversion instead of the
builtin text codecs. With this QTextCodec simply
becomes a wrapper around ICU's ucnv_* methods.
We only keep our own codecs for UTF-*, ISO-8859-1,
ISO-8859-15 for performance reasons, and for TSCII
and iscii-* because they aren't supported by ICU.
Change-Id: I4fc49eba55cf772b9772c6dac606a47a44346a60
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is working, but let's just be sure by adding a testcase.
Change-Id: I8c6b5ded0c7b6c90645dbf70a7ce6c1ba447a284
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Ensure benchmarks which need QtWidgets are gracefully disabled when
that module is unavailable.
Fixed one unnecessary usage of "QT+=widgets".
Change-Id: I8031b5dca585749f0f4d22e0637adc3f57f4e418
Reviewed-by: Kalle Lehtonen <kalle.ju.lehtonen@nokia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
contains(QT_CONFIG,opengl) tells whether Qt itself is able to use
OpenGL, which is not the same thing as whether the QtOpenGL API is
available. Make the check correct; fixes compilation when Qt is
configured with -no-widgets (which also disables QtOpenGL).
Change-Id: Iaa296c2b10650971ef4846f8bc6f44761fadcf7c
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
This test was using some QSpinBox instances to generate signals for
testing. Use our own QtTestObject to generate the signals instead.
Change-Id: I3714955ae040d541c3b613a478945c38a18be18d
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
the system path separator and shell are bound to the host system
(system() will use cmd even on mingw with sh.exe in path).
the makefiles otoh may depend on what the qmakespec defines.
consequently, add $$system_path() and $$system_quote() (for use with
system() & $$system()). $$native_path() is renamed to $$shell_path() and
should be used with $$shell_quote() to produce command lines in
makefiles.
$$QMAKE_DIR_SEP needs to be applied to Option::dir_sep right after
parsing the spec, so it is available to $$shell_{path,quote}().
Change-Id: If3db4849e7f96068cf03a32348a24f3a72d6292c
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
- Introduce smart pointers to delete widgets and resources
to ensure tests are not affected by left-over widgets
also in case of failure.
- Replace deprecated QTest::qWaitForWindowShown() by
QTest::qWaitForWindowExposed() and use QVERIFY,
remove some hard-coded timeouts.
- Set some titles and object names.
- Add verbose debug output of event lists in tests
childEvents.
- Set minimum sizes on widgets to avoid Windows warnings.
- Stabilize GDIWidget, trigger on first event only.
Change-Id: I64119a2e7113e4a9f0156d00c72ce0935d03bb81
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
This is useful for inserting a string without space-handling, given that
dbg.nospace() followed by dbg.space() inserts a space.
It's also useful for QDebug operators for custom types, so that they
can disable space handling and then restore to whatever it was before
(rather than forcing it to space() mode).
Change-Id: I9d72e9ffbcbc581ed093168752c29af924405b33
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When containing a QObject (or sub-class) pointer and trying to convert
to a QObject pointer canConvert() did dereference the pointer without
checking for it being null.
Change-Id: Ie274e54f2f817f2b6c5df64504f8af6359b8f38d
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
In touch event terminology the global position is the screenPos,
scenePos is the windowPos.
Fixes a tst_qdeclarativepincharea test failure in qtquick1.
Change-Id: Ie98fe12be8cbedc9b019913b066e7c4bce75278d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
Make sure the test subdirectories are actually visible
in the file model before the tests start.
Change-Id: If640456bba4362b19d7ad9d9184736c2eb8d3bde
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This avoids test instabilities and prevents test directories
from being cluttered with temporary files. Change tests
accordingly. Remove unused createLink() method.
Change-Id: I843c28ab81c8a476c71c5211a7479b22d3d9fc93
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
This allows to check whether QMetaTypeId2::MetaType exists, and can help
turn run-time into compile-time expressions, even without constexpr support,
or in situations where constexpr can't be used (because you can't overload
on it). This was designed for the QMetaType::registerConversion feature,
but it's much more widely applicable.
Change-Id: Iafa04add04bcb531b3f7fe3e751c7e91ee6a3bc0
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
Using the nullary version has the advantage that multiple calls
during a program run are much more efficient, since an inlined
atomic is used to store the result. It also ensures that
Q_DECLARE_METATYPE(T) has been used, whereas qRegisterMetaType<T>("T")
will happily register anything. So I've added the macro where it
was missing, or moved it to a central place when it existed
hidden.
In tst_qnetworkreply, this became a bit tricky, because a private
header is conditionally included, so moved the Q_DECLARE_METATYPE()
into a conditional section, too.
Change-Id: I71484523e4277f4697b7d4b2ddc3505375162727
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Remove usages from autotests with the exception of
widgets/kernel, widgets/widgets and widgets/graphicsview.
Change-Id: I917b2857ed0cd07a6b3dbcd69244f558086c6586
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Also check the return value of
DefaultValueFactory<QMetaType::Void>::create(), the same way it's
done in testCreateHelper<QMetaType::Void>().
Change-Id: I3e6d7fca4ea74dbe65009f2eb2c64a1b3a370d68
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This is a simplified port of KDTools' KDAB_SET_OBJECT_NAME.
It simply assigns the variable name as the objectName of
a QObject, uic-style. It uses a small helper function so
that it works on references as well as pointer variables.
QLabel label;
QLabel *pLabel = new QLabel();
Q_SET_OBJECT_NAME(label);
Q_SET_OBJECT_NAME(pLabel);
Change-Id: I25fec0c90f33249a3ea5d2dd622ab708019fd101
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Using qRegisterMetaType<T>() has the advantage that multiple calls
during a program run are much more efficient, since an inlined
atomic is used to store the result. It also ensures that
Q_DECLARE_METATYPE(T) has been used, whereas qRegisterMetaType<T>("T")
will happily register anything.
Had to add Q_DECLARE_METATYPE to QFileInfo, for
QList<QPair<QString,QFileInfo>> of QFileSystemModel to work with
the partial specialisations of Q_DECLARE_METATYPE for QList, QPair.
In order to synchronize this change with other modules that did
their own Q_DECLARE_METATYPE(QFileInfo), a sync macro is defined
that can be tested in other modules, and will later be removed again.
Change-Id: I3004664e07e64cd885d5a03a57ff4e4379804aec
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
While the qWaitForWindowShown(QWidget *) is inherited
from Qt 4.8, the qWaitForWindowShown(QWindow *) was introduced
in Qt 5. As it is identical to qWaitForWindowExposed()
and removed already, it can be deprecated in Qt 5.
Remove its usages in qtbase.
Change-Id: I28788d120ad687a49f02b2b44de6b38a2832fe5c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
This makes development on the meta type system easier because only
QtCore must be re-built to run most of the tests. The existing
QGuiVariant test needs to be run before pushing anyway, but not
so frequently.
Change-Id: I1fa66edbd790c957e1a232226847dd550227a477
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@nokia.com>
