This patch addresses a specific Qml problem, where the meta types list
will grow indefinitely when unloading and reloading Qml components over
and over (in an failed effort to save memory).
The implementation is not specific to Qml though, but will cater to all
use-cases where registered types may not live until the application's
termination.
Change-Id: Ic0224dcd19aeb559715ef088b22a30509be2456b
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
After selecting all (enabled) transitions for a microstep, filter out
any conflicting transition. The actual conflict resulution is done by
ordering the transitions in order of the states that selected them.
For example: if an event would trigger two transitions in a parallel
state where one would exit that state and the other would not, this
filtering prevents the state machine from selecting both states (as this
case is an invalid state of the whole machine).
This also fixes the exit set calculation for parallel states when one of
its substates is exited and subsequently re-entered in the same
transition. Previously, the parallel state was not exited, and
subsequent re-entry was ignored (because it was still active). Now it is
correctly exited and re-entered.
A side-effect of the transition ordering mentioned above is it also
fixes the non-deterministic behavior of which of the conflicting
transitions is taken.
[ChangeLog][QtCore] Fixed an issue where the state machine could end up
in an invalid state when transitions from a parallel state were not
checked for conflicts.
[ChangeLog][QtCore] Fixed a case where a parallel state was not exited
and re-entered when one of its substates was exited and subsequently
re-entered.
[ChangeLog][QtCore] Fixed the non-deterministic behavior of picking a
transition from a set of conflicting transitions.
Task-number: QTBUG-44783
Change-Id: I2ee72b6a2f552077bfa7aa4d369474ab62f4c2f0
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Reviewed-by: Kevin Funk <kevin.funk@kdab.com>
When a history state is entered that has an actual saved history (so not
the initial state), the entry set was calculated wrongly in some cases.
See the bug report for the specific case.
The fix is to fully implement the standard, so method names in the
private class are updated to reflect the names as used in the standard.
Note that, as mentioned in the bug report, the algorithm as described in
http://www.w3.org/TR/2014/WD-scxml-20140529/ has a bug. What is
implemented is the fixed algorithm as described in the current working
draft as of Friday March 13, 2015. This draft can be found at:
http://www.w3.org/Voice/2013/scxml-irp/SCXML.htm
[ChangeLog][QtCore] Fixed an issue where a history state restore would
activate too many states, possibly putting the state machine in an
invalid state.
Change-Id: Ibb5491b2fdcf3a167c223fa8c9c4aad302dbb795
Task-number: QTBUG-44963
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
QSaveFile is intended to be a replacement for QFile, and should use the
same permissions for newly created files. QTemporaryFile however creates
new files with 0600 mask by default.
Fix this by making the mode_t argument QTemporaryFileEngine uses
configurable, and using 0666 for QSaveFile (like we do in QFile).
[ChangeLog][Important behavior changes] Files created by QSaveFile do
now have the same rights as files created by QFile. This also fixes a
regression in QSettings: In the Qt 5.4 series, new files created by
QSettings were only readable by the current user.
Task-number: QTBUG-44086
Change-Id: Ie1cc20e9f25c6e72e1bc9176490c419c27c5fc82
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Add a dedicated operator=(std::initializer_list) that
first resizes the QCLA, and then replaces the elements
one by one.
This should be usually faster than creating a temporary
QCLA and then copying it, except for the case where the
new array does not fit into the allocated stack - but this
is IMO nothing to optimize for.
Task-number: QTBUG-45041
Change-Id: I147d6d01186b1ca3c635b2c8365d8f6e638ce6fe
GPush-Base: 08de3113051e1289f0de0651ec5647c9ee6feb27
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Concept of 'current position' exists only for random-access devices.
As documented, for sequential devices QIODevice::pos() must always
return 0. Prevent a modification of the internal 'pos' member in
QIODevice::readAll() method to follow this rule.
Change-Id: Ida2ee6a629ccfc3068d62f95ab1064ada13fdda5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
+ A bunch of fixes in the locale data
+ New scripts from Unicode 7.0
+ New locales
- Some locales disappeared (aa_DJ, aa_ER, st_LS, ss_SZ, swc_CD, tn_BW)
- Some locales lost their contents (i.e. en_Dsrt_US)
[ChangeLog][QtCore] QLocale data updated to CLDR v.27
Change-Id: Iba8c7884f8087e577cbb25a8fc106dd7bd3ebb5d
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
* Two newly adopted currency symbols:
the Azerbaijan manat and the Russia ruble
* Pictographic symbols (including many emoji), geometric symbols,
arrows, and ornaments originating from the Wingdings and Webdings sets
* Twenty-three new lesser-used and historic scripts
extending support for written languages of North America, China, India,
other Asian countries, and Africa
* Letters used in Teuthonista and other transcriptional systems,
and a new notational set, Duployan
For more details, see http://www.unicode.org/versions/Unicode7.0.0/
The Properties struct's .*Diff members were narrowed down
to signed 15 bits and the unicodeVersion has been expanded to 8 bits.
[ChangeLog][QtCore] Unicode data updated to v.7.0
Change-Id: I93ab6f79fa3b05f61abc7279f1d046834c1c1a0b
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
There appears to be at least one fix, related to sign- or zero-extension
in the call to isspace(). So it's a good idea to update again. This also
brings the behavior to match strtoll and strtoull on Linux, including
the fact that strtoull will parse negative numbers. For that reason,
qstrtoll and qstrtoull are now wrappers that try and keep the behavior
that we used to have.
This update also changes the code from a 4-clause BSD license (bad) to a
3-clause BSD license (good).
Change-Id: I73b01b02ebd1551bf924599d52284ad25cc1def0
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
When building the test while qtbase has been installed and the
build dir was removed, the include paths were not found in
frameworks builds.
Change-Id: I32d9e61176a5e19c86095580ddad6914f25ff952
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Without QProcess support we do not run test which initTestCase is
trying to find.
Change-Id: Icecaad90f61a019489e372517a6d62372155bd46
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Implement an initializer_list constructor, which was probably
just forgotten so far. Technically this is a SC incompatible change,
since
QVarLengthArray<int> array = {10};
will now create an array with one element 10, instead of an empty array
with a reserved size of 10. Anyhow, keeping the inconsistency with the
STL / other Qt containers here would certainly do more harm than good
in the long run.
Task-number: QTBUG-45047
Change-Id: I4675880f93e141181250939942fa32300916b0e3
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Since Qt 5.0, static overloads of QChar has a uint parameter only,
so there is no more ambiguity between uint<->ushort and thus some tests
does not make sense anymore; avoid explicit cast to uint for the others.
Change-Id: Ibc7a2ac4de63d3f023a8dbb5e53211ef8521579d
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Added casting to QT_OFF_T type. Otherwise fails on some
compilers.
Change-Id: I4f1f0c558af7d182a4babf38a7f048b27b3db611
Reviewed-by: Pasi Petäjäjärvi <pasi.petajajarvi@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When using non latin keys, remove() could cause corruption
of the json object.
Task-number: QTBUG-42270
Change-Id: I7305e57ebb78630a9bf68bc4f831a6d1646abb79
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
ICU doesn't support iso8859-16, so we need to fall back to
the Qt codec for this encoding.
Task-number: QTBUG-45053
Change-Id: I9754cf098c906fe8a75363a3d090029543cd0e35
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QObject::connect tries to determine if the arguments are registered
metatypes. This used to work even for arguments that were forward
declared. But now, the metatype system tries to call
QtPrivate::IsQEnumHelper<T>::Value to know if it is registered.
That fails on gcc if T is forward declared.
Apparently gcc needs to know the full type of T to pass it in the
ellipsis function, even within a sizeof expression.
So change the ellipsis expression to a template one.
Task-number: QTBUG-44496
Change-Id: I7fa07bd3cde470b134c2ec53b0d581333d16a6f1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This system is no longer in the CI rotation and we haven't had reports
of the same issues happening on later versions. Either the issues have
since been fixed or they were never an issue in Qt in the first place.
This commit has the additional benefit of getting rid of the following
shell error when qmake was run:
sh: line 0: [: =: unary operator expected
as /etc/lsb-release hasn't contained DISTRIB_CODENAME for some time and
proper quoting was never implemented (not even qtcpsocket.pro).
Change-Id: Ia0aac2f09e9245339951ffff13c829e910ee64e9
Reviewed-by: Albert Astals Cid <albert.astals@canonical.com>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@digia.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- removed an unused field
- initialized variable that might be used uninitialized.
Change-Id: I7a7a063f025ecc32fa462dd8d5e2485c2ba52eb8
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Properly QSKIP tests that use disabled QProcess and symlink
features instead of excluding them silently by #ifdef.
Other reason is that moc doesn't respect QT_NO_* defines
in class definition which causes build issues on some
platforms.
Change-Id: I041020f7452f7d36c7ec8a5866a4ba5eb23d1f94
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Jason McDonald <macadder1@gmail.com>
The existing check fails to detect the case where white space characters
other than the space character are replaced by space characters
without the length actually changing and returns the original string.
Task-number: QTBUG-44936
Change-Id: Ice6faa975f8b41f185c76f6d0d4ff81603e25eb3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Let's not try to to compare our QTimeZone handling with the system one.
Our handling goes beyond the range of the POSIX APIs, so that's a recipe
for error.
Change-Id: Iee8cbc07c4434ce9b560ffff13ca4a4f335bdbae
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
The refactoring from a8c74ddcf7 commit
exposed more issues in the Windows API. There were already quite a few
QEXPECT_FAIL for this, so this isn't new.
For example, localtime(1351386000) on the Central European Timezone
should be "Sun Oct 28 02:00:00 CET 2012" (the second occurrence of 2
am), but the Windows API returns tm_isdst = 1 (i.e., still in the CEST
timezone) and that's incorrect.
Change-Id: I1bc63ac99b1d67b55d783f9606e5c59b24223b13
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
In QtScript we use the msecs since epoch conversion (JS date is based on
the concept). After a8c74ddcf7 the date
conversion test in qtscript started to fail. Instead of relying on the
code working by chance, simply update the date when setting it with
setMSecsSinceEpoch.
Task-number: QTBUG-44885
Change-Id: I9f95c9cdccea52e7d1f808f3cb9e18570ef0df13
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
\t was not interpreted as a tab character.
Task-number: QTBUG-44884
Change-Id: I3c733e227fba7e5fd5153df0ae4d0431903bb104
Reviewed-by: Daniel Teske <daniel.teske@theqtcompany.com>
Reviewed-by: David Faure <david.faure@kdab.com>
Use qmath and cmath methods instead of math.h methods.
Change-Id: I86ee2465c999822bf00a7cefee1642c4c30590a6
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@digia.com>
Otherwise, we modify shared strings that happened to be rvalues.
Task-number: QTBUG-44706
Change-Id: Ia0aac2f09e9245339951ffff13c85bfc912f03d1
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
When timezone support for QDateTime was added, we decided it was a good
idea to delay creating the QTimeZone object and checking that the time
is valid in that timezone (including for local time) until the user
requested that information. Unfortunately, QExplicitlySharedDataPointer
returns a non-const T* in operator->(), which meant we were accidentally
modifying the d pointer's contents in const methods, which in turn means
those const methods were not thread-safe when operating on the same
object.
This commit changes the d pointer to QSharedDataPointer, which is safer
in this regard and pointed out where the issues with constness were
located. Since we can't lazily calculate QTimeZone anymore, we need to
do it whenever the date, time or offset changes.
Task-number: QTBUG-43703
Change-Id: Ic5d393bfd36e48a193fcffff13b9686ef4ef1454
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
It was already a user meta-type, so it only gets
promoted to internal.
[ChangeLog][QtCore] QPersistentModel index becomes an built-in
meta-type, including QVariant support.
Change-Id: I63d733d1eb66aa61691e7afce27fe7372a83ac00
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Calling applicationName() in the destructor of a global static (e.g.
via QLockFile) was working when calling setApplicationName explicitly
but otherwise it would suddenly return an empty string.
This led to inconsistencies, the application name switching from
non-empty to empty at saving-on-destruction time.
There was already a global static, used when setting the app name
explicitly before construction. Use it now to store the app name
in all cases (explicitly set, or fallback).
Change-Id: I71d3a0c40158f8bfd022c385b198346a2594b1cb
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
And add tests for the GCC intrinsics and for std::atomic.
Task-number: QTBUG-43794
Change-Id: Ic5d393bfd36e48a193fcffff13b9b2dbaee80469
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Otherwise, values that are composed of others are not handled
correctly. For example,
Qt::Dialog|Qt::FramelessWindowHint (Qt::Dialog=0x2|Qt::Window)
is currently output as
"Window|FramelessWindowHint" since
Qt::Window matches first and its bits are removed from the flag value
so that Qt::Dialog in the next iteration no longer matches.
Change-Id: I67db5c977c75f887392aa8f345c5e6e9d82c5c26
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
On platforms which does not have at all sysv support, all
posix ipc tests and compilation failed because sysv
specific header files were included unconditionally.
Change-Id: I5713ace6daeb6e79f8794ce42b2b3dfa1b95ab2d
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
The files were moved to a qrc resource, so the string is never empty,
we need to use QFile::exists to make sure they exist.
And the error message was wrong, pointing to current dir.
Change-Id: I532bda9f6221fb5c69b779b8b48baac9ede90eba
Reviewed-by: Rainer Keller <rainer.keller@theqtcompany.com>
Those QTimeZones failed to convert to other timezones because the data()
virtual function was never overridden and reimplemented. That meant all
QUtcTimeZonePrivate objects were *really* UTC, with no offset.
Task-number: QTBUG-44600
Change-Id: Ia0aac2f09e9245339951ffff13c5294bb783c674
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The c2m() function which converts a const_iterator into an iterator
is a broken concept for an implicitly shared container such as
QVector, because the act of calling begin() as the starting
point already detaches and invalidates the c2m argument.
This could be fixed in c2m, but the bug wasn't even in c2m,
but in removeAll(), which called end() before c2m, so the c2m
argument was already invalidated when entering c2m.
The solution is to store the positions as indices instead of
iterators before calling the first detaching function.
Task-number: QTBUG-44592
Change-Id: I66cf4f1277e71148a4d5b5bbfb6a3369ad02db68
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
As requested in review of 1d2efe1f27.
I didn't add a comma in front of the timeSpec() as the other fields
aren't separated by commas, either.
Change-Id: I54d74b7199ca7e46e28d2ceca22b02205e318c90
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
