We obviously should check the variable we're about to get the data from.
Amends 1216f596bd.
Change-Id: Ibe87138b9c9aa99837b4fbf3769cd26ca1aaacb9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
If MOC_INCLUDEPATH exceeds a certain limit, its content is written into
a file named mocinclude.opt, which is then passed to moc as a response
file. That moc parameter was not properly quoted, and the moc call
failed for paths containing spaces.
Task-number: QTBUG-63197
Change-Id: Ib0542d80ce1bab239e0e6b6e24fadd11007b1846
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Changed signals and slots to new syntax, used nullptr and replaced
foreach with new C++11 range based for loops.
Also fixed a few minor flaws.
Task-number: QTBUG-60633
Change-Id: Ice4030133971912f96752d9d84c638c70fd73e35
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Reviewed-by: André Hartmann <aha_1980@gmx.de>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The function was only well defined from RGB32 and ARGB32PM formats,
this patch fixes it so it behaves well from all formats.
Task-number: QTBUG-63163
Change-Id: Id892531d9aaf997b707b430196c1166493792a2a
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Don't always copy the variants that we want to compare. This can
in some cases be a relatively expensive operation.
Change-Id: I2b3fd246ac136b19d8a8d281fbdcfb0417c8fb6c
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Looks like whoever created the blacklist never tried to figure out why
it happened.
Change-Id: I84e45059a888497fb55ffffd14d2fb29e32a4521
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The issue itself is not really worth fixing (the very first request
being supposed to have a different proxy than any of the other
following requests before a session has been initiated), but we can
at least make the test pass when it is run alone.
Task-number: QTBUG-63134
Change-Id: I6c7df5c5653541031811e6bff562572061afae0f
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
When the source file is read-only then it would copy the file with that
attribute set when it is installed. However this will cause a problem
if it is installed a second time. Therefore the read-only attribute
needs to be manually reset before installing and again before touching
the file. Once the process is done then it is set back to be read-only
to preserve the state of the original.
Change-Id: I1c01f418ef3c9bd434acd2c2b8ee695544d7bb35
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Add an early check if both types are the same.
Change-Id: If6fc60a58fce641521c083bf920e72bf3d2d4c28
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When calculating item sizes (used for menu size)
the styles consider the widget screen. This widget
screen could be a wrong default or an obsolete value.
This patch ensures the screen is correct set on popup.
[ChangeLog][QtWidgets][QMenu] Fixed menu size issue when
using high DPI on multi-screen system.
Task-number: QTBUG-59794
Change-Id: I84461441d5d33cb8dc04ab1acb9630fbfc8c5514
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Morten Kristensen <msk@nullpointer.dk>
Reviewed-by: Per Liboriussen <liborius@chelys.dk>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
This option is listed when displaying the help of Quick tests,
but was never actively supported as it had been removed before
Qt5.0 was finally released.
Change-Id: I4cdf8d86471ab72e289f27a07a5f04c0338bfdbd
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
If an application has more than one menubar, for instance, one for each
mainwindow it has visible then once one is deleted it needs to ensure
the application menu items are updated as appropriate.
To do this the resetting of the known menu items is extended to cover
all the application specific ones so that they can all be updated
correctly.
Task-number: QTBUG-62193
Change-Id: I61f46a4745f4e40b9283d40fa5a7473f2721c354
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
If a dead key occurs as a result of pressing a key combination then
characters will have 0 length, but charactersIgnoringModifiers will
have a valid character in it. This enables key combinations such as
ALT+E to be used as a shortcut with an English keyboard even though
pressing ALT+E will give a dead key while doing normal text input.
Task-number: QTBUG-57933
Change-Id: I52fe9edacefe7298a96af5430831f805626bacd2
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Speeds up the test from approximately 770ms to 180ms.
Change-Id: I2e5479fd5190b841b44d4a66380d27b1c3b55162
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The sources were already added conditionally in the project file since
179fe5981f.
Change-Id: I0baaec2e772f3e596d311c1973b9745aa2b80423
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
QUrlInfo is used only by the FTP implementation, so it uses the same
conditionals.
Change-Id: Ia15abf44d2a538e90b792a31c65926cc9e16aecf
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This gives the user a much clearer understanding of which part of the
test caused the warning.
Old warning:
WARNING: tst_controls::Default::Dial::test_linearInputMode(mouse) Mouse event occurs outside of target window.
New warning:
WARNING: tst_controls::Default::Dial::test_linearInputMode(mouse) Mouse event at 501, 179 occurs outside of target window (450x450).
Change-Id: I2943d79bab5a808e9b5b721758db216b91a07bbd
Reviewed-by: Liang Qi <liang.qi@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
It causes artifacts when moving the windows between monitors.
Amends e8ecde99df.
Task-number: QTBUG-53255
Task-number: QTBUG-62901
Change-Id: Ia8b0f760370887a75efa05bc9736075afebfe069
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Bail out of cleanup() when run 2nd time.
Task-number: QTBUG-60626
Change-Id: I8a9be2fcfb0e8a5584ce8ed7952affff24bd2a33
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Enabled via configure --ccache, or CONFIG += ccache in 3rd party
projects.
Ensures that we use the right sloppiness and other ccache options
during compilation.
Task-number: QTBUG-31034
Change-Id: I696b3d3f0398873a29b93d1bc2b4d4e06ef23dc9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The backing store was assigned the sRGB color profile
as an unintended side effect of the QImage -> CGImage
conversion function refactoring in ac899f6d. This
caused Core Graphics to add a color convert step, which
in some cases caused performance issues.
Restore fast, previous behavior by assigning the target
display color profile to the backing store image.
Color correctness is still a goal, but we’ll add API
for it and make it opt-in.
Task-number: QTBUG-61384
Change-Id: I107f06a881a34fa711b386265d8dc2edfb246624
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Follow up of fc37e03699:
while the file is #included from pcre2_compile.c, it's never
actually compiled (seems to be about a debugging aid for developing
PCRE2). So it's safe to get rid of it.
Change-Id: I0affaad730e8c5678d3431e47d5fee0dbedc0e78
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Both iOS and tvOS need to have JIT disabled, so use the uikit qmake
scope for that. This was already done for PCRE 1, but the corresponding
change was lost for PCRE 2 (probably due to a bad merge).
Change-Id: Iac7997880c13b34ced46c63b748980c6fb700a0f
Task-number: QTBUG-62993
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
The QWindow passed to eventFilter is static so it might be in a
different screen when we call getNativeMousePos, resulting in negative
position and all sorts of glitches.
Change-Id: Ibc848c6d85d8b6932ee379aa77851094212a0db2
Reviewed-by: David Edmundson <davidedmundson@kde.org>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
When the focus object inside a window changes and we are
currently composing text, we have to cancel composition to avoid
getting into an inconsistent state. This is what already happens
if you switch to a different top level window.
Note: Because we limit the user's ability to change focus inside
a window when composing text, this would only happen under
certain circumstances, such as creating a new MDI window with
an editor while still composing text in a previous one.
[ChangeLog][macOS] Switching focus objects inside a top level window
while composing text using dead keys or input method events would
leave the application in an inconsistent state. The composition
now automatically cancels when the focus object changes.
Task-number: QTBUG-59222
Change-Id: I06792a7db1441dcc5c87e4bf0861b422a25f7f7c
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
[ChangeLog][QtCore][QFileInfo] Relative symbolic links on Windows are
now resolved to their absolute path by symLinkTarget().
Task-number: QTBUG-62802
Change-Id: I5826517130bd389aef994bf3f4b6d99b2a91b409
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
pcre2_printint.c does not need to be compliled as a standalone source
file, as it's #included from pcre2_compile.c. Apparently qmake does not
detect this in all cases, and sometimes tries to compile pcre2_printint.c,
resulting in compile errors.
Change-Id: If494e5853b52ff1387bfb24f3847b73edcc837b7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
