Make it possible to select the C17/C18 standard with
CONFIG += c17
or
CONFIG += c18
Pick-to: 6.2 5.15
Fixes: QTBUG-96026
Change-Id: I719d22366c3efda009118d58ead173a25ed285c0
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Consider a release-only, non-framework Qt build on macOS. Building a
debug user project would fail, because qmake tried to link
against *_debug.dylib and *_debug.a libraries.
Building a debug user project that uses QtUiTools against a release-only
framework-build Qt posed the same problem. QMake tried to link against
the libQt5UiTools_debug.a, which does not exist.
Fix this by maintaining a list of library file candidates, and use the
first existing one (or just the first one if none exists). This favors
the library matching the user project's configuration but falls back to
the release version of the library if necessary.
Fixes: QTBUG-81251
Pick-to: 6.2
Change-Id: I8d641104718edb16500c6d6e3994e736fa5ddcf4
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
If QMAKE_APPLE_DEVICE_ARCHS is not set, we pick up the available archs
based on what Qt was built with (QT_ARCS), but only build the active
arch.
Pick-to: 6.2
Change-Id: I83273f878022af34a3a0d0eeae8b11d781f78c49
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This reverts commit c686e885c0
and commit d64abf8166.
We don't feature .qmake.cache/.qmake.super files anymore in the
source directory, so there's no problem anymore.
Change-Id: Ib820a109fbfbad70d85b0f14ef72915882217ca3
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
When dealing with a universal build of Qt, we would end up
using the QT_ARCH as the architecture for user projects,
but this architecture is always the primary one that Qt
was configured with.
Instead of relying on QT_ARCH, we start writing QT_ARCHS
(plural) to qconfig.pri, based on CMAKE_OSX_ARCHITECTURES,
and then use that to initialize QMAKE_APPLE_DEVICE_ARCHS.
We then resolve the active arch using uname -m, matching
what CMake does.
We still feed all the available architectures to the
Makefile or Xcode project, so that the user can build
for any of the available architectures without needing
a reconfigure.
Fixes: QTBUG-93760
Change-Id: I0d338241ba4d944ca36d85371e9c4df7dbc4f269
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
This increases link time significantly; instead set
"-g4" or the new "-gsource-map" only if source maps
are enabled.
Change-Id: Ibe2d438d48e9ae2fce5f79d4e8a9f17c01cf2485
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
If we already have the list of Android ABI in BUILDS, it's not
necessary to generate extra resource while Qt build.
Amends: 58556afb69
Pick-to: 6.0
Pick-to: 6.1
Pick-to: 5.15
Fixes: QTBUG-88031
Change-Id: I344efe6c477461659a360281da59c4abeae18fc2
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Xcode's new build system checks duplicated entries when building. Qmake wants to embed
the launch screen for all types of configurations (static libraries etc.) which makes Xcode bail
out with "Multiple commands produce LaunchScreen.storyboard".
Pick-to: 6.0 6.1 5.15 5.12
Task-number: QTBUG-71035
Change-Id: I5c028e687f16e046b12156c1a8a89540deba4d3b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Since we don't feature it for CMake, there's little point in keeping it
for qmake.
Pick-to: 6.1
Change-Id: I7f17d2536510c0b94dca9767036ceab7ec08e1d8
Reviewed-by: Tino Pyssysalo <tino.pyssysalo@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
A few configure defines get changed:
QMAKE_WASM_PTHREAD_POOL_SIZE is now QT_WASM_PTHREAD_POOL_SIZE
QMAKE_WASM_TOTAL_MEMORY is now QT_WASM_INITIAL_MEMORY
QMAKE_WASM_SOURCE_MAP_BASE is now QT_WASM_SOURCE_MAP_BASE
device-option EMSCRIPTEN_ASYNCIFY=1 is QT_EMSCRIPTEN_ASYNCIFY=1
To create source maps for debugging. use
device-option QT_WASM_SOURCE_MAP=1
Task-number: QTBUG-78647
Change-Id: If9f30cd7fb408c386d6d69b5f7b1beecf1ab44b5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
To not disturb the qmake build we kept syncqt.pl in <src>/bin but
installed it to libexec. This is not necessary anymore.
This also removes the need for having syncqt.pl in both, bin and libexec
in the build dir of qtbase.
Pick-to: 6.1
Fixes: QTBUG-91076
Change-Id: I44b014ea41e3f00c420e02fd5c76f11169340b8c
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
[ChangeLog][Build System] Tools that are called by the build system and
are unlikely to be called by the user are now installed to the libexec
directory.
This is a step towards easier co-installability of different Qt
versions.
Pick-to: 6.1
Task-number: QTBUG-88791
Change-Id: Id19575b5ba27795f7715e4ea6a09391b26dd4942
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
This will be used to access host tools that are installed in
${prefix}/libexec instead of ${prefix}/bin.
Pick-to: 6.1
Change-Id: I36c4b5736330f8229d267a117c65d55cd5e12758
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Fix condition when adding qmake_immediate to resources. This condition
was wrongly positive in any non-android case, but also had to check for
BUILD emptiness or build_pass. This cause issue because
qmake_qmake_immediate was added to the RESOURCES variable earlier, than
actually generated.
Fixes: QTBUG-88031
Pick-to: 6.0
Pick-to: 6.1
Pick-to: 5.15
Change-Id: I38dad858a7e81ab709e622ec24baa8f9b80970fa
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
comply with the api version used by default with androiddeployqt and
in docs. Google play also requires api 29 as minimum.
Task-number: QTBUG-90943
Pick-to: 6.1 6.0
Change-Id: I05e2a90b4d7f2120b0198e3fb7b8b1b2398eba93
Reviewed-by: Ville Voutilainen <ville.voutilainen@qt.io>
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
The macOS SDKs now follow the same major/minor version scheme as iOS,
where the major version is bumped for each OS release.
Pick-to: 6.0 5.15
Change-Id: I021421a9c58bb1ae64bc0c63b4215f14e4ada358
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The qmake variable QMAKE_APPLE_DEVICE_ARCHS was added for iOS,
to support universal builds, as the QT_ARCH is a single value.
Since the qmake macOS builds are non-universal (at the moment),
we remove the hard-coded value for QMAKE_APPLE_DEVICE_ARCHS on
macOS, and let the normal architecture test resolve the arch,
like on other platforms.
To ensure that the following configuration tests are run with
an -arch argument, we trigger a commit of the preliminary Qt
configuration after running the architecture test. This is not
strictly necessary, but makes it clearer what's going on during
configure.
The device_and_simulator configuration option was used by the
iOS toolchain, and needed to be moved up in the configuration
test order to not break later tests.
The logic in mac/default_post.prf for both Xcode and Makefiles
to add -arch flags was kept as is, based on the existing
variable, to avoid too many changes to this logic.
The logic in toolchain.prf was amended to make it clear and
ensure that it only applies to iOS builds. macOS builds do
not have this issue.
Pick-to: 6.0
Pick-to: 5.15
Pick-to: 5.12
Change-Id: I70db7e4c27f0d3da5d0af33cb491d72c312d3fa8
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When doing static builds any project which uses same
libraries as qtbase 3rd party libraries will most likely
end up in broken binaries, since symbols will be
included twice. Moreover, libraries can have different
versions. Install 3rd party headers and meta data for:
* qtlibpng
* qtfreetype
* qtharbuzz
Pick-to: 5.15
Task-number: QTBUG-87154
Change-Id: I243dff9a12a95af20dee414f55bb762b8d579c81
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
qtdeclarative's QtQml module adds a dynamically generated qmldir file to
its RESOURCES which is located outside the source directory.
Previously this caused qmake to generate an invalid alias for the qmldir file.
Now the relative path is discarded properly.
Fixes: QTBUG-88204
Change-Id: Ia689d9d110db092cee595bf44fcbb6d57783fded
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Depending on the presence and behavior of HEADER_MODULE/header_module
in CMake and qmake land, the module.pri might end up with an empty
module line, which means adding the module via QT_PRIVATE += entrypoint
will not link to the static library.
To avoid this problem we write an explicit module entry (QT.foo.bar)
into the same module.pri file as the one generated by qt_module,
where the auto-generated one has header_module enabled, and hence
no link behavior, while the manually written entry has a module
component, and will ensure linkage to the static library.
Change-Id: Ib98484f74410fab45c4d109f3610028200fba0c5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The flags go before the library in the final linker line, as opposed
to the dependencies declared in LIBS.
This allows us to declare the flags for the entrypoint
in the project file of the entrypoint, instead of in
a standalone prf.
Change-Id: I35c054fe9fdaa6add7cd0e8ba3f7304f975ff80f
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
On the qmake-side we had exports, but they were quoted.
Change-Id: I95af4b927079691cab6403fec850f345ba181a00
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Beginning with Visual Studio 2017, vswhere should be used to discover
Visual Studio installations. Installations of 2019 and up are not even
registered inside the registry anymore, so vswhere is the only way to
obtain information about these.
Pick-to: 5.15
Task-number: QTVSADDINBUG-819
Change-Id: Ibd8b2c4d38c7925857887f39e750e87a33f08bf9
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
As a result of b5af140809 the link dependency to the
mingw32 static library was ordered after the entrypoint
library, which resulted in the WinMain symbol not being
found during linking due to how the static linker processes
archives.
Fixes: QTBUG-87725
Change-Id: I8e075f91f7f06dcdc618a4e0ae6d9c1d832888c0
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
We need to ignore this option in qt_configure.prf.
This amends 077ea0c633.
Task-number: QTBUG-87049
Change-Id: If05b16a95d0830df9ca63961576981f8983820cc
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
The use-case is relevant for other platforms as well.
Now that Qt has a module system we can also replace a lot of the
hand crafted logic for linking with simpler constructs.
Change-Id: Ib6853aaf81bfea79c31f2de741d65b4b56f23ef6
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The code only existed to avoid the auto-generated
Q_IMPORT_PLUGIN(QIOSIntegrationPlugin), but nowadays
with bitcode enabled the code is not used, plus we end
up with this auto-generated file for other plugins anyways.
Change-Id: I91c8c88f4e825caab7d7d5250edaba8c57cb7374
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
On Windows shell, using unix path format might not work, since the shell
expects backslash paths only.
Pick-to: 5.15
Task-number: QTBUG-87066
Change-Id: I51741b475c1ede11336df63ee1c6092c792c16ef
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Remove the stale Qt 5 CMake files.
Disable the generation of CMake files by the qmake build system,
it wouldn't create usable Qt 6 files anyway.
Keep mkspecs/features/create_cmake.prf and
mkspecs/features/cmake_functions.prf for now until we can confirm that
they are safe to remove.
Task-number: QTBUG-86827
Change-Id: Idcf59f4d7d5474171a9bf72904ff19adc8bc74cd
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
qmlimportscanner and rcc in Qt 6.0 are part of the host installation
and not in the target installation which androiddeployqt expects it to be.
Fixes: QTBUG-86831
Change-Id: I9d7a6fce3d2f109bab933fcfd7fdd5d2c83821a8
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
All system frameworks use 'A' instead of the major version of the
framework, and Xcode's code signing assumes that the framework version
is 'A' when signing embedded frameworks (FB7323980), so leave the
version 'A'. This is also what Apple recommends.
Change-Id: Idbf2e30e156c3e869da8f75731e568524d9407e5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Clang doesn't automatically switch architecture just because we're
passing an iPhoneOS sysroot. In the past this resulted in a warning
about trying to link an x86_64 binary to arm64 libraries, but with
Xcode 12 this is now a hard error.
Fixes: QTBUG-86718
Pick-to: 5.15
Pick-to: 5.12
Change-Id: I7e9d2ca513d276029fc2a6cfe694a35fe41c39b3
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
