Remove some code which was commented out with 'NOT_READY_YET' since the
initial Qt5 import. Since the mentioned bug reports are no longer
available remove this code.
Change-Id: I98686e53d85619f01d16105d147eba79b557a104
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
When a prepared statement is still alive after the database was removed
with QSqlDatabase::removeDatabase(), the cleanup routine is trying to
access the driver which is no longer alive which results in a crash.
Fixes: QTBUG-79019
Change-Id: I4630e3b947a12b23ed062f015abc373fc0e246c1
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
MySql 5.0 was released 2005 so it's time to remove support for MySql 4.x
14 years later.
[ChangeLog][QtSql][QMYSQL] Removed support for MySql < 5.0 since 5.0 was
released 14 years ago.
Change-Id: I45005accdffefbd9338ac0e710512a4c7ea8e09e
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
QSqlDriver::notifcation() signal is available in two versions since Qt4
times. They are both emitted in the corresponding places which is
useless.
Therefore deprecate the one-arg version.
[ChangeLog][QtSql][QSqlDriver] The one-arg version of
QSqlDriver::notifcation() is now deprecated.
Change-Id: Ie09aa0cc952f4d854c6fb617b37b9047a3194ee3
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
This is part of the migration of qtbase from QRexExp to
QRegularExpression.
Task-number: QTBUG-72587
Change-Id: Id82e103d4076fed63c871385b2b0f21c04735d00
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Deprecated APIs of sql lib are used only in tests. This change
makes sure, that the tests build and pass with those deprecated APIs
removed or disabled, by:
- Making the parts of the tests testing the deprecated APIs to be
compiled conditionally, only when the corresponding methods are
enabled.
- If the test-case tests only the deprecated API, but not the
corresponding replacement, added tests for the replacement.
Task-number: QTBUG-76541
Change-Id: I93ed6ff92c7aa7af2c106b1a9d92d3704c7d9105
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
Semi-automated, just needed ~20 manual fixes:
$ find \( -iname \*.cpp -or -iname \*.h \) -exec perl -pe 's/(\.|->)load\(\)/$1loadRelaxed\(\)/g' -i \{\} +
$ find \( -iname \*.cpp -or -iname \*.h \) -exec perl -pe 's/(\.|->)store\(/$1storeRelaxed\(/g' -i \{\} +
It can be easily improved (e.g. for store check that there are no commas
after the opening parens). The most common offender is QLibrary::load,
and some code using std::atomic directly.
Change-Id: I07c38a3c8ed32c924ef4999e85c7e45cf48f0f6c
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
One of the tests was not added to the parent subdirectory pro so this
is also rectified.
Change-Id: I270f1c2882260e3e3fac83d074ed6444c5dece19
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Only the first successful query was stored in the variable. When a new
query is executed the function QSqlResult::setActive was not replacing
the last executed query.
Fixes: QTBUG-28883
Change-Id: Ib4938c42e6264f9edd0764b4a392da7988f68fc0
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Since some databases are case sensitive if part of the query is quoted,
then we should ensure that all instances of the table name are escaped
unless the test is delibrately testing the non-escaped case.
As a result, this commit also removes some expected failures pertaining
to PostgreSQL and also adds an entry to the list of tables being dropped
when a test is finished.
[ChangeLog][Sql][PostgreSQL] QSqlDatabase is now stricter about table
names when used with record() and primaryIndex(). If the tablename was
not quoted when it was created, then the table name passed to record()
and primaryIndex() needs to be in lower case so that PostgreSQL is
able to find it.
Fixes: QTBUG-65788
Change-Id: Id1f54cb66b761c39edf858501b730ede7eec1fd3
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Since QSqlDatabase::database() cannot be used to access another database
from another thread, then the overload is provided to make it possible
to clone with just the connection name. This will handle the cloning
internally safely then.
Fixes: QTBUG-72545
Change-Id: I861cc5aa2c38c1e3797f6f086594a1228f05bada
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
tst_QSqlQuery::bindBool() did not check if the bool is correctly bound
as part of the WHERE statement. Add a new test to query for the bool
column and check if there is exactly one row returned.
Fixes: QTBUG-38891
Change-Id: I0bd1ceb1b30e50f67f44f5b06d68683195b78b29
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
This patch enabled json1 support for sqlite3 by defining
SQLITE_ENABLE_JSON1
[ChangeLog][QtSql][SQLite] Enable the json1-extension for
the SQLite3 plugin
Task-number: QTBUG-63498
Change-Id: Iaf1069ff1396c573125a5a3f490c0df5df560468
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Both sqlite3_open_v2 and sqlite3_close are documented to return an error code:
https://www.sqlite.org/c3ref/open.htmlhttps://sqlite.org/c3ref/close.html
However, those were ignored (other than checking whether the operation
succeeded), causing QSqlError::nativeErrorCode() to always be "-1" when there
was an error while opening/closing the database.
Additionally, the error string needs to be read (via sqlite3_errmsg16) in
qMakeError *before* d->access is set to 0, or the databaseText() will always be
"out of memory" no matter what error actually happened.
Task-number: QTBUG-70506
Change-Id: I75cbf178c9711442e640afd26c4502214d20c598
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The default values for varchar columns were not decoded properly.
Task-number: QTBUG-46968
Change-Id: Ie13d48c316cd694240f7e287010b97afc8c6c341
Reviewed-by: Robert Szefner <robertsz27@interia.pl>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Variable was declared outside #if-ery but only used inside,
leading to warnings when the define wasn't set.
Change-Id: Iad6a236bdf76b8ca0a58a84509d19f7e1a3e2df2
Reviewed-by: Mikhail Svetkin <mikhail.svetkin@qt.io>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
As the full range of TIME is '-838:59:59' to '838:59:59' then we cannot
use QTime as the object to store this data in. Therefore a QString is
used instead for passing the data to and from. This does not impact
existing code using QTime already as it will still convert it from
the QString to a QTime to give the same result as before.
[ChangeLog][QtSql][MySQL] The TIME data type is now treated like a
string-based type in order to respect the full range of the TIME data
type.
Task-number: QTBUG-57028
Change-Id: Ieb7105bff3043b845f76bc873d088e6bac1e4f10
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This accounts for a case of a placeholder being duplicated in the
prepare query, but where only one placeholder was used. This amends
e4e87a2ece
Task-number: QTBUG-68299
Change-Id: Ia92ee912facd51a13e7222886debb219b24442b0
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
OCIBindByPos2 is only needed when using execBatch(), binding data that
is longer than USHRT_MAX works for exec() so this is left unchanged.
Change-Id: Ifdcf91939d184f225d24c13052ea0b81611ecf91
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
If the db isn't valid, then that's the actual issue, not the fact that we're
getting the same invalid db (with the same driver QSqlNullDriver) in
multiple threads.
Change-Id: I95490818ed78e741c3823e115f139c2cff01b0b1
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Also expands the tst_qsqlquery::batchExec() test to account for this
case and generally test the functionality. In addition it is made to be
more robust to avoid any discrepencies with the testing data. The test
in general is also cleaned up to enable more of it being tested with
the different database drivers where possible.
An expected fail is added for MySQL due to the fact that it has a bug
where null timestamp entries are being converted to the current
datetime when adding it as a bind value.
Change-Id: I0061bd1c69ae35b4858afc49420f13ce59cf48ae
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This fixes the following:
- tst_QSqlDatabase::recordMySQL() to account for performance
improvements done for small integral types
- tst_QSqlQuery::nextResult() so that NUMERIC results are seen
as doubles
- tst_QSqlQuery::timeStampParsing() so that MySQL accepts the
CREATE TABLE statement
Change-Id: I68fb1d06dac12d500bb4596463f5bdd65cc9c226
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
When using a virtual table inside a SQLite database it is possible that
it does not report the right number of parameters. Therefore we need
to account for this case to prevent it from crashing when trying to
bind parameters it thinks does not exist.
Task-number: QTBUG-66816
Change-Id: I3ff70bb1fe73091f43c3df53616f75858e451cfd
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Postgresql needs a special value for nan and +/- inf. This was
considered during insert but not during select.
Also remove some pre-c++11 inf/nan - handling and replace it with
Qt equivalents.
Change-Id: I044ca58e9cf673f4b100b05a0d8e25c8a9c29ec5
Reviewed-by: Robert Szefner <robertsz27@interia.pl>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Currently there is a bug in Qt regarding the PostgreSQL driver as it
does not correctly escape the table names when constructing queries
internally. Therefore, these tests are marked as expected failures until
the bug itself is fixed in Qt.
Change-Id: I74dadc187f8a08509128dfea27be99787e57ea51
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This also accounts for some quirks on the PostgreSQL side:
- Null values for a related table are placed in a different
order when sorted.
- Functions (sum, count) return a different type than other databases
- Using quotes to account for case sensitivity with tables
Task-number: QTBUG-63861
Change-Id: Ib1894fa8d0c77d7045941f7c57be0d0acd8d117e
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
In order to save having to always run a query to get the tablename for
a known oid then we cache the result on the driver side. The oid stays
the same while the table exists, so only on dropping it would it change.
Recreating the table causes it to get a new oid, so there is no risk of
the old one being associated with the wrong table when this happens, if
the driver is still open at that point.
The benchmark added shows the improvement from the previous code, before
the results for PostgreSQL was:
RESULT : tst_QSqlRecord::benchmarkRecord():"0_QPSQL@localhost":
259 msecs per iteration (total: 259, iterations: 1)
whereas now it is:
RESULT : tst_QSqlRecord::benchmarkRecord():"0_QPSQL@localhost":
0.000014 msecs per iteration (total: 59, iterations: 4194304)
Task-number: QTBUG-65226
Change-Id: Ic290cff719102743da84e2044cd23e540f20c96c
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Reviewed-by: Robert Szefner <robertsz27@interia.pl>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Instead of having to modify the tst_databases.h file whenever you want
to add a test database, this will now read from a file to find what
databases are available. This defaults to dbs.json in the same directory
or the QT_TEST_DATABASES_FILE environment variable can be set to point
to the file that contains the databases. The latter makes it easier for
CI then to have something set up on a per configuration basis.
The SQLite database stays hardcoded so this will continue to be tested as
before without any additional changes.
Change-Id: I7e7ccde6a6be3e490dd640b1590e3b691a6b2ab3
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
sqlite will reuse the index for bound parameters when the named
placeholder is duplicated so we only need to call bind one time for each
placeholder. Therefore we need to have just one instance of each value
when doing the bind.
Task-number: QTBUG-65150
Change-Id: I75c4bcc4563e43c180a59a7a4cbb770dbe994642
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
This change adds support for multiple result sets in PostgreSQL.
[Important Behavior Changes] The QPSQL driver now supports multiple
result sets. Since QPSQL previously did not support multiple result
sets, there may be some compatibility issues with the existing code
that executed several queries as one and were expecting to get
the results of the last one. In this case use QSqlQuery::nextResult()
to move to the last result set.
[ChangeLog][QtSql][QPSQL] Added support for multiple result sets
Change-Id: I2bfc91f512c4dac83116f3aa42833839a6da084c
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
With this change, it is possible to significantly reduce memory
consumption of applications that fetch large result sets from databases.
The implementation is based on the new functionality called "single-row
mode" that was introduced in PostgreSQL version 9.2:
https://www.postgresql.org/docs/9.2/static/libpq-async.html
It also uses asynchronous commands PQsendQuery(), PQgetResult():
https://www.postgresql.org/docs/9.2/static/libpq-single-row-mode.html
[ChangeLog][QtSql][QPSQL] Added support for forward-only queries (requires
libpq version 9.2 or later)
[Important Behavior Changes] The QPSQL driver now supports forward-only
queries. To use this feature, you must build QPSQL plugin with PostreSQL
client library version 9.2 or later. See the Qt SQL documentation for
more information about QPSQL limitations of forward-only queries
(sql-driver.html).
[Important Behavior Changes] If you build the QPSQL plugin with PostgreSQL
version 9.2 or later, then you must distribute your application with
libpq version 9.2 or later. Otherwise, the QPSQL plugin will fail to load.
Task-number: QTBUG-63714
Change-Id: I15db8c8fd664f2a1f719329f5d113511fa69010c
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
QSqlDatabase objects can only be used in the thread that the connection
was opened for. So if the driver was created already then we check if
the thread is correct. If it is not then we output a warning and return
an invalid QSqlDatabase.
[ChangeLog][QtSql][QSqlDatabase] QSqlDatabase::database() will return
an invalid QSqlDatabase if the calling thread does not own the requested
QSqlDatabase.
Task-number: QTBUG-216
Change-Id: Ib5a25aa62129e3925f9819109af05961e5178bc5
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
As the numercialPrecisionPolicy can be set and subsequently retrieved
from the QSqlDatabase's driver, then when copying the QSqlDatabase, we
need to set that appropriately too.
Task-number: QTBUG-10452
Change-Id: I2c63748365ab4e9fbc29d8d460d80d2e2a0ee385
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
We haven't had support for anything older than 7.3 for a long time, so
this removes the code to save having to maintain it any further.
Task-number: QTBUG-644
Change-Id: If0635f3bef5138a00a0e77011a70f23d0bffda32
Reviewed-by: Robert Szefner <robertsz27@interia.pl>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Also blacklist tst_QNetworkReply::ioHttpRedirectErrors(too-many-redirects)
on RHEL 6.6 in CI.
Conflicts:
tests/auto/network/access/qnetworkreply/BLACKLIST
tests/auto/network/ssl/qsslsocket/tst_qsslsocket.cpp
Task-number: QTBUG-64569
Change-Id: I7514fc0660c18fd3a3e1d0d0af3f15d879e3c6f4
When looking for the primary index, it is possible that the
constraint_name in the all_ind_columns table does not match that of the
index_name. Whereas the index_name will match in this case, so the query
should set the where clause on the index_name in both tables.
Task-number: QTBUG-64427
Change-Id: I1bf1fb580e620b9f75f2fde1ecf408842e377365
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
