Introduce a template function to determine the special values
via macro and use that for QVariant::Double and QMetaType::Float.
Task-number: QTBUG-44381
Change-Id: I379dd82b22d467b0aebaa42f4f0f5c52472a5c47
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
The problem is that the operator<< was taking a non-const reference to the QDebug
object. This causes a problem as all other operator<< return a temporary.
Since every other roperator<< takes the QDebug by value, we should also take it by value
in this case.
Move the operator<< in qdebug.h because i don't want to #include qdebug.h from qobject.h
And move the qt_QMetaEnum_debugOperator to be in the corresponding .cpp
Task-number: QTBUG-44462
Change-Id: Ia01629224c58930c2997e767efc43de90d6309e2
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
We must do something when requestUpdate() is called on a QWidgetWindow.
The semantics of UpdateRequest for QWindow and QWidget are unfortunately
different: for widgets an UpdateRequest means "sync the backing store".
For QWindow it also involves marking as dirty.
Change-Id: Idf40b3fc0873652dc081edeb12c96b3007a126ef
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
Reviewed-by: Jørgen Lind <jorgen.lind@theqtcompany.com>
Instead of constructing a QString that describes the QDateTime
instance, stream the constituents of the string into QDebug
directly, using op<< for Q_ENUM, now that it's available.
Adapt test to new format of enums.
Effects on Linux GCC 4.9 stripped release builds:
text -1068B
data +-0B
relocs +-0
Change-Id: I1a5ce28904edd7d0f6c8d982fd41c52e3536e036
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][QtWidgets] Added QPlainTextEdit::createStandardContextMenu(QPoint)
overload that takes the position in document coordinates. This method enables
the actions that are sensitive to the given position eg. where the user clicked.
Change-Id: I47ed7a1afc4fcfb3318c9b7af37867aeb7f2aa35
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Similar to what we've done to QString, only we print each byte that is
not ASCII as \OOO (octal representation).
[ChangeLog][QtTest] QtTest now prints an escaped version of
QByteArrays that failed to compare with QCOMPARE, instead of the hex
dump.
Change-Id: I6a8c43f138c66c998280998a242b43cd579666a0
Reviewed-by: Richard J. Moore <rich@kde.org>
Currently QDBus relies on a key in QMetaClassInfo to understand the DBus interface name.
This patch allows QDBus to also use a specified interface name in the registerObject call
instead of relying on QMetaClassInfo that might not be there (if the QObject was created
in QML or Javascript for example).
Change-Id: Ie02b2c67e7deb07f43e35eb166c11833fcbf38f3
Task-number: QTBUG-44074
Reviewed-by: Kevron Rees <kevron.m.rees@intel.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- Add support for reading out feature lists from GPU bug lists
in Chromium format (supporting OS + version, exceptions lists,
device ids and vendor ids).
Add a overloads allowing for passing file name,
data or JSON documents.
- Test reading in tst_qopenglconfig
- Prototypically have the Windows plugin read the file
from the environment variable "QT_OPENGL_BUGLIST" and
turn off renderers depending on the standard keyword
"disable_d3d11" and newly introduced keywords
"disable_d3d9", "disable_desktopgl".
- QT_OPENGL_BUGLIST can point to an absolute or relative
path, in which case it is resolved via QLibraryInfo::SettingsPath
and QStandardPaths::ConfigLocation.
[ChangeLog][QtGui][Windows]
Introduce experimental feature allowing the user to specify
a GPU driver buglist with some additional keywords to chooose
the GL renderer backend depending on GPU.
Task-number: QTBUG-43263
Change-Id: I8c20b0e8ee3cf575b91d0672bf405c42d3e9fb64
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
On Haiku the '/' filesystem is a pure namespace to mount
in the actual root partition (/boot), and therefor returns
0 for free/available/total bytes.
Change-Id: I60d4786389e01ee271f6cd1aba6f96b19e6a828f
Reviewed-by: Augustin Cavalier <waddlesplash@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Ivan Komissarov <ABBAPOH@gmail.com>
This operation is the exact opposite to QQuaternion::fromAxisAndAngle()
(so that it is a way to extract the axis and angle values suitable
to create the same quaternion via QQuaternion::fromAxisAndAngle()).
Change-Id: I41fda58f5fb2b867cccd6b2faf58ab671fa070da
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
We've been setting the -Zm argument since the dawn of times (even before
the first git commit). Anyhow, MSDN from VS2008 onwards indicates
that this is not needed:
"In earlier versions of Visual C++, the compiler used several discrete
heaps, and each had a finite limit. Currently, the compiler dynamically
grows the heaps as necessary up to a total heap size limit, and requires a
fixed-size buffer only to construct precompiled headers. Consequently, the
/Zm compiler option is rarely necessary."
[ChangeLog][Compiler Specific Changes] Visual Studio: -Zm200 (an option to
specify the precompiled header memory allocation limit) is not added anymore
by qmake to the compiler calls. If you encounter an C1076 compiler error you
might need to re-add it in your .pro file.
Change-Id: Ia4bec7eba09d893a7d81886a1814602b9ce7563c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
QTextFormat::font{Weight,PointSize}() etc. return the font trait explicitly
set on the QTextFormat, while QTextFormat::font() returns font which also
uses the QTextDocument::defaultFont() as a default for any font traits not
explicitly set on the QTextFormat. Accessibility support for text attributes
used the former, which was wrong; this commit fixes it to use the latter.
Also includes tests to verify the fix.
Change-Id: Iab7f2be1b68adaad847d1f29c9e5af2195416035
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Secure Transport relies on keychains, both client/server are constantly
updating default keychain and as a result tests are failing: when
verification is expected to fail, it succeeds; when the number of certificates
is expected to be 1 - it's 2 (Secure Transport can find certificates in a keychain).
This makes verifyClientCertificate test quite useless at the moment - QSKIP it.
Change-Id: I578398b4912a86dc60f585ac5a1bdd0098914005
Reviewed-by: Richard J. Moore <rich@kde.org>
There are more than 1000 new entries since the table has been
generated the last time.
Some auto tests needed to be adjusted, because some entries in
the TLD table were removed while others were added.
Change-Id: I4ceec392836d2031dfef49a0c5a857c31b36bb4c
Reviewed-by: Richard J. Moore <rich@kde.org>
Adds conversion from QJsonArray and QJsonObject, and report missing
conversion failures for other QJsonValues.
Change-Id: Ic0c3a952657912401db877b068f7fcc3c08c94c2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QPlatformTheme::keyBindings() performs a binary search
into an ordered list of StandardKey -> Key Sequence
mappings where each StandardKey can have multiple
key sequences.
Previously the order of the Key Sequences in the
returned list would be indeterministic and, except
for the designated pri-1 key sequence, would not
necessarily correspond to the list order. (The
ordering was dependent on where the binary search
"hits", which again depends on the size of the list.)
This caused trouble when adding mappings, since it
would change the order in the returned key sequence
list for existing mappings and confusingly cause
(apparently) unrelated test failures.
Fix this by replacing the manually coded binary search
with std::equal_range.
One test case needed to be fixed up because it had the
result in the wrong order (verified by looking at
QPlatformTheme::keyBindings).
Change-Id: I555ca2736b1a8e6454dc79645a8246f80119cfc2
Done-with: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
Change-Id: I643049a865b0a8936e132e12f7845d5527f4f808
Reviewed-by: Jani Heikkinen <jani.heikkinen@theqtcompany.com>
Reviewed-by: André Klitzing <aklitzing@gmail.com>
Use an existing, non-symlinked directory for the unit test.
Change-Id: Ice9976a4fd10c42c3cb014614ccd699bcea1065f
Reviewed-by: Augustin Cavalier <waddlesplash@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: If43dcc2b77fea5ae3ec40cc847467fc21fbd2c83
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
QAbstractSocket::close() always calls QIODevice::close(), which resets
QIODevice's internal read buffer. So it makes no sense to make same calls
from disconnectFromHost(). This made the closeCalled private member
superfluous.
Change-Id: I4ec64e9711490e44e737763e4ed7fb41bffe2556
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Optional parameter DESTINATION to set target rcc file
Example:
qt5_add_binary_resources(GenerateFixture "fixture.qrc")
Task-number: QTBUG-41728
Change-Id: I9dc2fe8e7d5e9ad3873b89f75ab84a2a1b9d1d29
Reviewed-by: Stephen Kelly <steveire@gmail.com>
Qt copyrights are now in The Qt Company, so we could update the source
code headers accordingly. In the same go we should also fix the links to
point to qt.io.
Outdated header.LGPL removed (use header.LGPL21 instead)
Old header.LGPL3 renamed to header.LGPL3-COMM to match actual licensing
combination. New header.LGPL-COMM taken in the use file which were
using old header.LGPL3 (src/plugins/platforms/android/extract.cpp)
Added new header.LGPL3 containing Commercial + LGPLv3 + GPLv2 license
combination
Change-Id: I6f49b819a8a20cc4f88b794a8f6726d975e8ffbe
Reviewed-by: Matti Paaso <matti.paaso@theqtcompany.com>
Adds an SSE4.1 optimized version of qUnpremultiply and uses it in the
most drawing conversions methods. This gives a speed-up of little over
2x.
Change-Id: Ieb858a94ada1eb86d7af715ac1a100f1587f360d
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Unify the behavior of the different operator<< by always using
QDebugStateSaver (appending an optional space at exit), and making
sure that the space(), nospace() setting isn't 'leaked'.
Change-Id: I38e4f82fa6f7419d8b5edfc4dc37495af497e8ac
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
This adds tests to check the behavior of a QSslSocket-based server when
presented with various client certificates.
Change-Id: I431157e46cfb00880ae8b7a33015cce50e56b6bb
Reviewed-by: Daniel Molkentin <daniel@molkentin.de>
This message is just informal, and not really relevant to the test case.
qtbase can now be built with -Werror=date-time
Change-Id: Ic14289f2f801d5a6e811869e60afb9691c7ca98b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
So if you stream enum type into qDebug, it will show the name
of the enum value instead of the int
Change-Id: Iec5e826623353560319890d3e7c4ab97d0645f4a
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
In Qt4, if the result of the translation
QApplication::translate("QT_LAYOUT_DIRECTION")
returned "RTL", Qt usually called
QApplication::setLayoutDirection(Qt::RightToLeft)
in order for a translation file to specify if the UI should be
left-to-right or right-to-left.
However, due to modularization, we could no longer call
QApplication::translate(), so the code was wrongly changed to call
QCoreApplication::translate(....) instead.
This was wrong, and in addition the translation files was never updated
with the new context.
This patch fixes it to only translate it with the QGuiApplication context.
This is the only sensible context, since QApplication would lack QtQuick
support, and QCoreApplication would not know how to change layout
direction.
[ChangeLog][QtGui][i18n] Fixed bug where layout direction did not switch
according to the instruction in the translation file.
Task-number: QTBUG-43447
Change-Id: Id0409a42d41b3b9ff1cd53d090c4d9c9802f5659
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Disable top-level widget code path for embedded widget in the show
helper.
Task-number: QTBUG-43780
Change-Id: I574e07130e5e68a019a426cee3fde982f3883720
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Check by comparing __argc/__argv whether a modified argv was
passed to QCoreApplication. If that is the case, build
QCoreApplication::arguments() from that argv instead of using
the command line.
[ChangeLog][Important Behavior Changes][QCoreApplication]
On Windows, QCoreApplication::arguments() now returns a list built
from argv on Windows as well if a modified argv was passed to the
class' constructor.
Task-number: QTBUG-30330
Task-number: QTSOLBUG-184
Change-Id: I2498bb554130e7bfaeada3aebe786dfdd0eb534d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
We shouldn't create QPixmaps when comparing QBrushes that do not
contain a QPixmap.
This patch extends the comparison logic to comparing QImage cachekeys
if the brushes are QImage based.
Note the comparison still produces false negatives on equal content on
different pixmaps and images, but this is preserving existing behavior.
Task-number: QTBUG-43766
Change-Id: I001b4032172c1e568aad311f7df2eaae6aee8dc6
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Change-Id: I6b551de331aa0386ea53d8e96f50b669777d2d69
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
... as newer versions of nmake (and jom, for compatibility) have botched
circumflex processing (they simply don't do it when shortcutting the shell
evaluation).
as a side effect, the output is also more readable if the string contains
quotes.
Change-Id: I0506b59ceecb70da258c482f9973156b2803066d
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
don't complain about various missing things resulting from replacing
default_pre.prf and having a private .qmake.cache.
Change-Id: Ie3471b514ebb1a80b72a480144551b56b5c7a254
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Move these types to QAsn1Element so that they can use the toString()
method which guards against malicious ASN.1.
Change-Id: I7d6155147a6fc2d41da6f3ae87551b6cb75aa9ce
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Reviewed-by: Daniel Molkentin <daniel@molkentin.de>
