CMAKE_INCLUDE_CURRENT_DIR is not necessary anymore for moc since
CMake 3.8: https://cmake.org/cmake/help/latest/release/3.8.html#other-changes
CMAKE_AUTORCC should not be used anymore. Instead, we now use
qt_add_resources() or similar
Enable CMAKE_AUTOUIC only if .ui files are present.
Pick-to: 6.3
Task-number: QTBUG-87643
Change-Id: I835e2994cd5dba9918136999499b9077961b616c
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Also consolidate several find_package(Qt6 ...) calls in one call.
Task-number: QTBUG-98867
Change-Id: Idfd5e71f46d4489fac7411cbfadb84437a0658f3
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
These are left-overs from the initial qmake2cmake conversion.
Pick-to: 6.2
Change-Id: Ie15c9ff022ea4566d10c1ba74599de9af83d29a7
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Examples are intended to show how to build against an installed Qt.
Building them as part of the main build means the way the Qt targets
are defined and created are not representative of an end user's build.
By building them as separate projects using ExternalProject, we can
more closely replicate the intended audience's environment. This
should allow us to catch more problems earlier.
Having examples built as part of the main build also creates problems
with some static builds where a tool built by the main build is needed
during configure time. This happens with other repos like qtdeclarative
but not (currently) with qtbase. Converting the examples in qtbase to
be built using ExternalProject is intended as a demonstrator for how
other repos can do similar. Until other repos are converted, they will
continue to work as they did before, with examples as part of the main
build for non-static builds only.
The new build-externally behavior is only supported for non-prefix
builds with this change. Prefix builds will continue to use the old
non-external method. Support for building examples externally in
prefix builds will be a separate change.
Task-number: QTBUG-90820
Fixes: QTBUG-91068
Change-Id: I2304329940568dbdb7da18d54d5595ea7d8668bc
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
As well as the MACOSX_BUNDLE properties as necessary.
Task-number: QTBUG-87664
Task-number: QTBUG-86827
Change-Id: I7677449a26d51fa853bd67bab6b3b61afbd2b12f
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This attribute is now on by default.
Change-Id: I7c9d2e3445d204d3450758673048d514bc9c850c
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Export some private functions from QUtf8 to resolve
undefined symbols in Qt5Compat after moving QStringRef.
Task-number: QTBUG-84437
Change-Id: I9046dcb14ed520d8868a511d79da6e721e26f72b
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Also add the missing examples/widgets/gallery project.
Change-Id: Iec3d61881065cf93d90f9fd3da928ffcd4f0c0aa
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
These examples show very tiny UI elements on Android devices,
thus enabling HighDPI.
Task-number: QTBUG-80717
Change-Id: I813801d5249dc1fcfc6f61a8d146f60dd19901f6
Reviewed-by: BogDan Vatra <bogdan@kdab.com>
The Qt version was added in 5.14 "for use as eventual replacement for
QString::SplitBehavior." Move another step closer to that goal.
Applied suitable wrapping round various char and string literals,
since docs are meant to show best practice.
Change-Id: Ie061905fad26f9b4dda3eedba4612704f0a19126
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Same pattern as QtQuickWidgets. Gets rid of QtOpenGL's dependency on QtWidgets.
Task-number: QTBUG-74409
Change-Id: I4f9b55c23e25a1e0519734037b768a16e870c7d2
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Conflicts:
examples/widgets/graphicsview/boxes/scene.h
src/corelib/Qt5CoreMacros.cmake
src/corelib/Qt6CoreMacros.cmake
src/network/ssl/qsslsocket.cpp
src/network/ssl/qsslsocket.h
src/platformsupport/fontdatabases/windows/qwindowsfontenginedirectwrite.cpp
src/testlib/CMakeLists.txt
src/testlib/.prev_CMakeLists.txt
tests/auto/corelib/tools/qscopeguard/tst_qscopeguard.cpp
Disabled building manual tests with CMake for now, because qmake
doesn't do it, and it confuses people.
Done-With: Alexandru Croitor <alexandru.croitor@qt.io>
Done-With: Volker Hilsheimer <volker.hilsheimer@qt.io>
Change-Id: I865ae347bd01f4e59f16d007b66d175a52f1f152
The following signals have been removed:
- void activated(const QString &);
- void highlighted(const QString &);
Task-number: QTBUG-81845
Change-Id: I61b552d9258987d4252202953aaf4909f9bd718e
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Christian Ehrlicher <ch.ehrlicher@gmx.de>
Checking for QT_CONFIG(printdialog) is not enough when printsupport is
completely disabled since then the macro will throw an error. Therefore
add an additional check 'defined(QT_PRINTSUPPORT_LIB)' before using the
QT_CONFIG macro.
Fixes: QTBUG-81626
Change-Id: Ie9898f057cdd6bf9daf4ba9135987cb6e901e7bf
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Deprecate the overloaded signals
buttonClicked/buttonPressed/buttonReleased/buttonToggled taking an int
to avoid to need to use QOverload<> when connecting the signal. The id
of a button in a button group can be easily fetched with
QButtonGroup::id().
Task-number: QTBUG-80906
Change-Id: Idaaab54bbcb25cba543fc99f305b9f4743ee3ed8
Reviewed-by: Sze Howe Koh <szehowe.koh@gmail.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
The example created two QPropertyAnimation instances that controlled
the same property; this caused a clash for some transitions.
Remove the smoothFlipXRotation and smoothFlipYRotation animations;
they are not needed as equivalent animations are already set as
defaults for the state machine.
Fixes: QTBUG-28081
Change-Id: Ifa7a09d48cd4905df720e3327914320ed74ebae6
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Removes QGL paths in sub-attaq and chip examples.
The boxes example depended on QGL and has been removed.
The corresponding module and test directories for the opengl module are now
empty, but has been left there so we can move the QOpenGL* classes there.
[ChangeLog][QtOpenGL] The deprecated QGL* classes have been removed.
Fixes: QTBUG-74408
Change-Id: I52f56409af8f6901359462a7ba162103d051fe3d
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
This was used to support QFlags f = 0 initialization, but with 0 used
as a pointer literal now considered bad form, it had been changed many
places to QFlags f = nullptr, which is meaningless and confusing.
Change-Id: I4bc592151c255dc5cab1a232615caecc520f02e8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Cleanup QtWidgets examples:
- use nullptr (clang-tidy)
- use member-initialization
- adjust the style
- fix includes
Change-Id: Ic5448606aacc525ea60b615a69227017aa2b821a
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
The flowlayout example crashes on startup because the last change
removed a c-style cast which converted -1 to ~0U ...
Fixes: QTBUG-78861
Change-Id: I0dbed4472b4f68a92b3f92763d00d28baa186f9a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Cleanup GraphicsView examples with the help of clang-tidy
- modernize-use-nullptr
- modernize-use-default-member-init
- modernize-use-override.IgnoreDestructors
- Some QList -> QVector changes
- use nullptr
- use normalized includes, remove unused includes
- fix style
Change-Id: I79347e55bfde52f6ae7749cc7093fbd442044020
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
- Replaced the usages of deprecated QWheelEvent::delta() and
QWheelEvent::orientation() with QWheelEvent::angleDelta().
In most of the examples it is acceptable to use only the vertical
component of angle delta.
- Made the docs APIs to build conditionally, based on the
deprecation version.
Task-number: QTBUG-76491
Task-number: QTBUG-76540
Change-Id: Id4230d483f724af49e4b6349b44881c3944de2a2
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
The benefit of keeping this code around was to inspire or inform
changes in the areas to take into account possibly missing features
in Qt 5, but at this point that benefit is questionable. We can
always use the history to learn about missing pieces if needed.
Change-Id: I87a02dc451e9027be9b97554427bf8a1c6b2c025
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This changes many different CMake places to mention Qt6 instead of
Qt5.
Note that some old qt5 cmake config files in corelib are probably not
needed anymore, but I still renamed and kept them for now.
Change-Id: Ie69e81540386a5af153f76c0242e18d48211bec4
* Simplify add_qt_gui_executable() to not require WIN32/MACOSX_BUNDLE
but provide it implicitly. It's redundant :)
* When on Android, build a module (shared library), just like qmake.
This requires an additional library destination in the install() call,
but that's ignored on other platforms.
* Fix typos in the android deployment generation settings function
* Use the correct cache variable to determine whether we're inside a Qt
build or not. Right now this only works inside Qt builds anyway as
QtPlatformAndroid.cmake is not publically accessible.
Change-Id: If1c763c31a7a83d0e0d854362ba7901657f63eb5
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CMake Build Bot
