If we receive compressed data we will decompress it as it comes in,
in some cases the final byte we receive doesn't actually contribute
to the final output. If this byte is handled by itself then, when
combined with QNetworkReply's signal compression, we ended up not
emitting the readyRead signal for any of the data we received while
compressing the signals.
So, instead of relying on checking difference in bytes downloaded
for each batch of data received we keep track of how much data
we had received the last time we emitted readyRead.
Pick-to: 6.3 6.4 6.4.0
Fixes: QTBUG-106354
Change-Id: I4777be29b46bf0de968667e9de9d975c735ac6e6
Reviewed-by: Konrad Kujawa <konrad.kujawa@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Because it's convenient to have it build automatically.
Pick-to: 6.2 6.3 6.4
Change-Id: Iecd5bd1f9fe518f683b8ee9eb6529e48ce76fb33
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Test was not really good to start with - it was assuming the presence of
particular ciphersuites. Furthermore, it was ignoring the fact that
TLS 1.2 and TLS 1.3 set ciphersuites differently in OpenSSL.
Pick-to: 6.4 6.3 6.2 5.15
Task-number: QTBUG-106018
Task-number: QTBUG-95123
Change-Id: I6c8ba20154cdeb9275878462ab945729d6c82ecc
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
OpenSSL 3 by default disables TLS < 1.2 in the conf files. We're not
going to work against that, so we bump the version of TLS used.
Keep the client-side TLS 1.0 Or Later just to keep testing that this
part works.
Task-number: QTBUG-95123
Task-number: QTBUG-106018
Pick-to: 6.4 6.3 6.2 5.15
Change-Id: Ia6cb10495875de232d69a886832ae74c5f5ac15f
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The initial problem was in server not starting encryption, because
its certificate was rejected by OpenSSL (v3) saying 'weak md'.
After the certificate was replaced, we got another problem - due
to the fixed TLS v.1 protocol for both client and server - handshake
is interrupted early with 'tls v1 alert' and error message
saying about not found signature algorithms. Don't fix the protocol
version, use proper QSsl::SecureProtocols (default).
Pick-to: 6.4 6.3 6.2 5.15
Task-number: QTBUG-106018
Task-number: QTBUG-95123
Change-Id: I0f22f5304f4405933ad511195bc61c640518e7d8
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The certificate was using SHA-1 for signing its certificate, which is
considered 'not good enough' by some TLS libraries.
Regenerate it with SHA-512 and a larger RSA key.
Also include the files needed to generate it.
Pick-to: 6.4 6.3 6.2 5.15
Task-number: QTBUG-106018
Task-number: QTBUG-95123
Change-Id: I535e047d540e663c8cec334695196044173949fc
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
OpenSSL v3 by default sets SECLEVEL = 2 unless overridden in conf files.
SECLEVEL >= 1 means TLS <= 1.1 is disabled. Remove cases that were
previously expected to work. Arguably, we should not test deprecated
protocols at all, but the cases expecting a failure still work
and logically correct.
Task-number: QTBUG-95123
Task-number: QTBUG-106018
Pick-to: 6.4 6.3 6.2 5.15
Change-Id: Ifa59fa902b433338dbed7abf086cfdef9470384c
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
With OpenSSL 3.0.5 we see X509_print giving us the text representation
not matching any of previous ones - mostly a question of spaces
and formatting. Let's add a proper version to compare against and
remove useless 0.9.8, 1.0.0, 1.0.1, - we don't support them anymore
and thus QSslCertificate::toText() will never give a match.
Pick-to: 6.4 6.3 6.2 5.15
Task-number: QTBUG-106017
Change-Id: Ida11321c23e74c7313acc682237ab78408cf2803
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
leaf.p12 is using RC2 for encryption and it's disabled by default
in openssl v3.
Pick-to: 6.4 6.3 6.2 5.15
Fixes: QTBUG-106017
Change-Id: I4edd0d29506d1e50b2b618b6a00cceeb4b156204
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Because this version does not seem to like MD5 which old cert was using.
Fixes: QTBUG-106019
Pick-to: 6.4 6.3 6.2 5.15
Change-Id: Id354d1e32acb0528685b2788ee9c7326c43397bd
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Initially, stream receive window's size was quite significant.
At some point when dealing with a server that did not want
our windows' sizes and was closing the connection (they only
accept 64K) we reduced this size, which ended in a regression
with download speed significantly throttled. We return the old
values (or even more, presuming we have 10 multiplexed streams
and not 100). And also making QNAM consistent with its documentation
(it was not updated).
[ChangeLog][QtNetwork] Stream receive window that HTTP/2 protocol in QNAM is using
increased to 214748364 octets (from the previous 64K) not to throttle download
speed. Clients, working with servers, not accepting such parameters,
must set HTTP/2 configuration on their requests accordingly.
Fixes: QTBUG-105043
Pick-to: 6.4 6.3 6.2
Change-Id: I252b6b5eefe92a7304dad15c67928d5a57d9597f
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Guard the test that checks the deprecated protocol versions
Task-number: QTBUG-104858
Change-Id: I1b76e08d8fc985abf758bf86198fe3d33e5497d4
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Otherwise new clients will not be handled when they try to connect
Amends 29a1fe72a0
Pick-to: 6.4
Change-Id: Ifff052d1bf27682df2782faa285a257c9b41d86f
Reviewed-by: Konrad Kujawa <konrad.kujawa@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Not just the ones we added to the pending sockets list
Pick-to: 6.4
Change-Id: I0a0016fe39df7ca2fc3f0c4e4111195bc6d90198
Reviewed-by: Konrad Kujawa <konrad.kujawa@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
If a client doesn't send any data then we would leave the socket open
for as long as it needed, wasting resources. Add timeouts to limit the
amount of time this can happen for.
Since there is a limit on number of sockets that the server will have
queued, having idle sockets stick around forever is a vector for ddos.
Pick-to: 6.4
Change-Id: Ida6251c92c625eeadf2065861b840b14255654b8
Reviewed-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
SecureTransport ignores any content that comes in until it is large
enough to be a handshake. So a plaintext client may be left hanging
while it is waiting for a response.
Pick-to: 6.4
Change-Id: I501ae61d89d516765c7ba5f0d916d9246fde5d4d
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The vast majority of in-tree users pass simple and short C string
literals as the value. By porting to QByteArrayView, we document that
we'll accept non-NUL-terminated data, and do the NUL-termination
internally, using SSO'ed std::string, saving memory allocations in the
common case of short strings.
I didn't bother to check which direction std::string takes for
nullptrs these days (there was a change accepted in that area for
C++20 or 23), so play it safe and protect against them.
Follow-up to
Task-number: QTBUG-105302
Change-Id: I2369acc62f1d5cbc26135396cfe0602d8c75300c
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
CMakeLists.txt and .cmake files of significant size
(more than 2 lines according to our check in tst_license.pl)
now have the copyright and license header.
Existing copyright statements remain intact
Task-number: QTBUG-88621
Change-Id: I3b98cdc55ead806ec81ce09af9271f9b95af97fa
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
The certificate was updated recently and doesn't have the same
deprecated hash functions and small key size as the old one did.
Change-Id: I301ad50a96a30483b92a6e30f61e78e8d6b955ca
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
OpenSSL v3 fails to set server's certificate, complaining that
"md is too weak".
Pick-to: 6.4 6.3 6.2 5.15
Fixes: QTBUG-49205
Change-Id: Ib21b10ff13bc2621ae2aaaab962efaaf77a854bc
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The iBridge interface is used for the keyboard touch bar, and the Apple
Wireless Direct Link interfaces are used by Apple for various purposes.
Setting up a server on these interfaces does not work.
Only the tst_QTcpServer::linkLocal unit test on macOS is affected by
this change.
Fixes: QTBUG-103892
Change-Id: I29701ce51d5e40dff6c59547a8639c1fba330d36
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Many algorithms (ciphers etc.) had become 'legacy' in OpenSSL v3,
meaning they are not available by default. Since we don't mess with
loading providers and don't load the 'legacy' one, we have to
skip tests involving such algorithms.
Pick-to: 6.4 6.3 6.2 5.15
Fixes: QTBUG-104232
Change-Id: Ieceabeb080e531aeb24f733cb8c83ad08a25049c
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Our limit of 8k for a single header field was too small for certain
services which returned Location values or WWW-Authenticate challenges
longer than 8k.
Instead, taking inspiration from Chromium, we have a limit of 250k for
the full header itself. And increasing our field limit to 100k, which
would occupy almost half of what the total header allows.
Also took the opportunity to make it adjustable from the outside so we
can set more strict limits in other components.
Fixes: QTBUG-104132
Pick-to: 6.3 6.4
Change-Id: Ibbe139445e79baaef30829cfbc9a59f884e96293
Reviewed-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@qt.io>
This was unblacklisted in b885820c39
however it is still very flaky.
Change-Id: If9796231c584c894387106dfeb262c9eb4ce73f5
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
It would not compile on my Linux box due to using QVariantMap, but not
actually including QMap itself. Using gcc 9.3.1 on CentOS 7.
Pick-to: 6.3 6.4
Change-Id: I808a270c814a906030cb34b197d3a2a85ba384e1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jesus Fernandez <jsfdez@gmail.com>
Both QtWeSockets and QtHttpServer has a QSslServer class that is useful
elsewhere. They are different though, so the new class has features
from both versions.
[ChangeLog][QtNetwork] Unify QSslServer from QtWebSockets and QtHttpServer into QtNetwork
Task-number: QTBUG-100823
Change-Id: I523f04db39297ceb9b258f673eb12deecfc6886c
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
The new signal pendingConnnectionAvailable is emitted after a new
connection has been added to the pending connections queue. Connect
to this signal and call nextPendingConnection to handle incoming
connections.
The existing unchanged newConnection signal is emitted after the
overridable function incomingConnection is called, regardless of whether
a new connection is added to the pending connections queue in the
incomingConnection function or not.
If a subclass that overrides incomingConnection either decides to not
add all incoming connections to the pending connections queue, or to
postpone adding the connection until a handshake is successfully
completed, the pendingConnectionAvailable signal should be to used,
because this signal directly corresponds to insertions to the pending
connections queue.
[ChangeLog][QtNetwork][QTcpServer] New signal pendingConnectionAvailable
is emitted when a new connection is added
Task-number: QTBUG-100823
Change-Id: I00c76761389065f68271553e69e6c45c393a2fa8
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Replace the current license disclaimer in files by
a SPDX-License-Identifier.
Files that have to be modified by hand are modified.
License files are organized under LICENSES directory.
Task-number: QTBUG-67283
Change-Id: Id880c92784c40f3bbde861c0d93f58151c18b9f1
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Both tests in the conditional depend on the
qnetworkinterface feature, and will fail to build
if qt is configured without the networkinterface feature.
Additionally, a missing system header in a test was added.
Change-Id: Ife5989ee57675ebe117de2c92a4f96c7125cbab1
Pick-to: 6.3
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
The http test data hasn't always been stable but for some reason
it fails far more than usual.
Originally the domain was a non-existing one, because it would then work
on any machine (even if not in CI) and would finish() (with error)
after failing to look up the domain in DNS. However, some machines in CI,
for some reason, take too long to do this and end up failing the test.
So, we change the URL to point to the network server in CI. This should,
at the very least, finish quickly when running in CI.
Pick-to: 6.3 6.2 5.15
Fixes: QTBUG-102952
Change-Id: I3b3f6fa23acf78fefdb69ff9ae7722f15e5f1736
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
In some situations when loading a redirect from cache which would lead
to a real request we would not emit the finished() signal because the
replyFinished function has a pre-condition that the response did
not originate from the cache.
However, after the initial redirect was loaded from the cache we never
unset the 'loadingFromCache' boolean, so it was still true after the
request had been made to the real target.
Pick-to: 6.2 6.3 5.15
Change-Id: I015a2ebae4af4bd17392182c3951e875a7b353c4
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The error message was quite vague since it would then not require
any additional translations. However, in hindsight this was a mistake
since now developers just thought their downloads were being corrupted.
Pick-to: 6.2 6.3
Fixes: QTBUG-101942
Change-Id: Ie9af42510ca027d15248e5bcf21e836e709898d9
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
As well as processConnection.
These tests cause flaky failures on Windows.
Pick-to: 6.3
Task-number: QTBUG-102880
Change-Id: Ie4bfe2ef40ad44efcfd0d83711ce257d1244ecdc
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Instead of having Q_UNUSED and QSKIP in the test itself, we just skip in
the _data function.
Change-Id: I9da3d3104ec25e2645e5770e6392bd46958da072
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The TLS v1.0 and v1.1 enums are all deprecated since 6.3. At the same
time, the test requires their use, because none of the peers seeem to
implement TLS v1.2, yet (cf. e.g. QTQAINFRA-4499).
Fix by copying the relevant enum values into global variables and
using those. This is a selective way to deal with the issue. The use
of the enums is so widespread in the test that the alternative would
have been to globally suppress deprecation warnings, which, however,
may suppress warnings we may actually want to fix.
Pick-to: 6.3
Change-Id: I4186be72209527fc404f3ba0a5a15f9719c64698
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
... a leftover from the initial patch-set not required in the one that
merged.
Change-Id: I0c5e94d8a0409faf4f7f9a354e98e239f7186da3
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Most likely related to qemu network configuration which cannot be
modified. Reason is that in QNX there is tool which can be controlled
qemu configuration, and it does not provide options for more finer
grade network configuration.
Pick-to: 6.2 6.3
Task-number: QTBUG-101274
Change-Id: I660466e36252e902a2314fb3f4988c531cda9214
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
And replace them with more descriptive versions
Change-Id: I3d5256072a5bbe0919a08b800877aa9b6a305a0b
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
