This library was created as a work around for limitations on Windows
Phone 8.0, which will not be supported going forward (Qt 5.4). Therefore,
we no longer need (or want to maintain) this experimental feature and
should remove it from the repository.
Change-Id: Ia417833f9de43e2d3e0940df93625e7d87a555ea
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Add a test that checks that QSet keeps the first of the elements
that have equal value. This is documented, but inconsistent with
values in a QHash, which keeps the last element with equal key.
Document this as a test. That way, we'll be informed when the
behavior changes (e.g. by a port to std::unordered_set).
Change-Id: I4ca1718bb86599b925b3ccd13b0856917cd4ce67
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
QOpenGLWidget is now public.
In addition Qt::WA_AlwaysStackOnTop is introduced to support the
special case of semi-transparent QOpenGLWidget or QQuickWidget on
top of regular widgets.
hellogl_es2 becomes the qopenglwidget example. This example performs
painting both via QPainter and native GL commands and has the OpenGL
widget combined with other, normal widgets.
The widget stack receives some changes when it comes to renderToTexture
widgets like QQuickWidget and QOpenGLWidget. Calling update() will now
result in a paint event, which is essential for QOpenGLWidget since we
want it to behave like a regular widget. The dirty region handling is
extended specially for such widgets due to performance reasons.
(an OpenGL content update must not result in any backingstore painting,
and is thus handled as a different kind of dirtiness)
[ChangeLog] Added QOpenGLWidget. This widget serves as a replacement for QGLWidget.
Task-number: QTBUG-36899
Task-number: QTBUG-40086
Change-Id: Ibf7f82fea99b39edfffd2fc088e7e0eadbca25cf
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
This is in preparation of rewriting the function for efficiency.
Change-Id: Id5c16b984b95d76e1f26d862e3813f75980f44fb
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QImage::invertPixels may produce invalid data after inversions of
images with premultiplied alpha, because the inverted colors will be
larger than the alpha.
This patch converts any image with a premultiplied alpha channel to
ARGB32 before inverting the pixels, and then back to the original
format after the inversion.
Support is added for correct inversion of RGBA8888 and RGB30 formats.
Task-number: QTBUG-39901
Change-Id: Ief24c55f495e67ef2ad6429b5b418d02963a64dd
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
Use sizes relative to the test widget size; move windows relative
to the top left point of the available screen geometry. Set a window
title on widgets to be able to identify them. The test now
passes on Windows using a 4K monitor.
Task-number: QTBUG-38858
Change-Id: I5df9198e390befeb3ca18796e24180135a084aad
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Use sizes relative to the test window size; move windows relative
to the top left point of the available screen geometry.
The test now passes on Windows using a 4K monitor.
Task-number: QTBUG-38858
Change-Id: Ia8d992f2a9bfa1cb1deacaf918ed0cfff7616959
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
- Show which button was pressed or released
- Render an ellipse proportional to pressure for each point drawn
- Different color for the eraser
- More complete output for each event
- Don't show mouse events by default, just as most tablet applications
can now ignore mouse events on the drawing canvas. But for the
purpose of testing interleaving of tablet and mouse events,
one can give the argument --mouse when starting this program
to show them too, as before.
Task-number: QTBUG-39458
Change-Id: I5e03f1aa748be39d524bd6984ff5d66579787cf9
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
The functions can be used to optimize code that do not need to use
the split results as QString directly.
[ChangeLog][QtCore] QString can now split a string to a list of
QStringRef.
Change-Id: Ic2dc929e1fba82f9a060e37c51068a301cb5b866
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
It is documented to be, and the LanguageChange event is caught and processed.
However, retranslateStrings() uses QProgressDialog::setCancelButtonText(),
which unconditionally sets useDefaultCancelText=true, blocking any further
changes to the button text by subsequent LanguageChange events.
The fix is to use extracted QProgressDialogPrivate::setCancelButtonText()
which - quite intentionally - doesn't set useDefaultCancelText.
Task-number: QTBUG-40504
Change-Id: I6e701deda10c454cb088c0b0778ac2d6adff574a
Reviewed-by: David Faure <david.faure@kdab.com>
The associated test has unearthed that setBar() fails to make the new bar a child
of the progress dialog. This will be fixed in a separate commit.
Task-number: QTBUG-40502
Change-Id: I2d09ebb07ae6395449a4efe38a638df831eebdd7
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: David Faure <david.faure@kdab.com>
On Linux for example Orca gets confused when showing a dialog that is a
child of another widget since it would show up twice in the hierarchy.
Task-number: QTBUG-39444
Change-Id: I84773ecc3d6774a652dbeb29ad201779f5b3191c
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
This patch adds support for binding RGB30 images as textures, and as
internal format of framebuffer objects. Together with the
QOpenGLPaintDevice
this provides support for rendering to and from RGB30 in full precision.
[ChangeLog][QtGui][QOpenGLFramebufferObject] Support 10-bit per color
channels formats as the internal framebuffer format, making it possible
to render in that precision.
Change-Id: I06de2d12dfe1c1adc466d574fdffbc77f88f4f16
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
[ChangeLog][QtCore][QByteArray] Fixed a bug that would cause QByteArray
to stop converting toUpper or toLower at the first embedded null
character.
Change-Id: Ia369037206617813d86a8f1489589243c82aa51b
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Use the built-in hex, showbase manipulator to format the number in
hex. Also, apply nospace() only once.
Change-Id: Id4b3d5f082ad13f52c8711408d7ec609bec3a621
Reviewed-by: Alex Blasche <alexander.blasche@digia.com>
Export the former qMessageFormatString() as qFormatLogMessage(). This
allows custom message handlers to format their messages just like the
default message handler, taking qSetMessagePattern() /
QT_MESSAGE_PATTERN into account.
The method should arguably not add the '\n' at the end, which a follow
up commit will fix.
Change-Id: Ib2a9cfda91473df079daf03bf3197e6ac63e013e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Alex Blasche <alexander.blasche@digia.com>
all else being equal, items with a higher numerical priority will appear
first in the result.
Change-Id: I4ee37ff404a53c4152a1e4fc2fc3c23ef525234d
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
It allows to create a QJsonObject instance in C++ by using
initializer list of pairs QString QJsonValue, for example:
QJsonObject o = {{"property1", 1}, {"property2", 2}};
[ChangeLog][QtCore][QtJson] QJsonObject now supports
C++11 initializer lists.
Task-number: QTBUG-26606
Change-Id: I67af881e175f427e563e685336c48a5f8466b476
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Introduce function QMdiSubWindowPrivate::storeFocusWidget()
to store focus widget and call this when de-activating a
sub window. Change restoreFocus() to return a bool and call
it from QMdiSubWindowPrivate::setActive().
Task-number: QTBUG-38378
Change-Id: I18dbe66ce85213ca5b4907b5a09126544415351a
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
This function has been inlined in commit 4f50be8d,
but wasn't removed.
Change-Id: I1a4eb7399ab2dd87a9fb15c4c886004d777487a8
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
On supported platform, allow to show a backtrace by using
%{backtrace} or %{backtrace depth=N separator="|"}
[ChangeLog][QtCore][Logging] QT_MESSAGE_PATTERN can include a
backtrace using %{backtrace}
Change-Id: Ib00418c070d3bd6fe846dc04bf69fa91ba64f9cd
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
If the test fails here, output the values actually used in comparison.
Change-Id: Ie4ed5ebdf1951c02b89a9648aee50a99d0bb0628
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Cost of a type lookup for core built-in types is really small, just few
cpu instructions, but the benchmark was testing create() and destroy()
functions (in a different fashion) which by definition allocate and
de-allocate memory. These memory operations are significantly more
expensive which obfuscate the results.
Change-Id: I33c679f57e6c2b57e98328f076dfe249ab7bcde8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Stephen Kelly <steveire@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is much more useful than the URL "file:", it allows to use
"empty path" and "empty URL" for the same meaning (e.g. not set).
QFileDialog actually uses "file:" though, as the URL for the
"My Computer" item in the sidebar. This patch preserves that.
[ChangeLog][QtCore][QUrl] QUrl::fromLocalFile now returns an empty URL
if the input string is empty.
Change-Id: Ib5ce1a3cdf5f229368e5bcd83c62c1d1ac9f8a17
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The "rbit" instruction requires ARMv6T2 or higher. This was found in the
CI when building the imx6 target:
Compiler: arm-poky-linux-gnueabi-g++
Flags: -mfloat-abi=hard -mfpu=neon
Errors from the assembler:
{standard input}:3078: Error: selected processor does not support ARM mode `rbit r3,r3'
{standard input}:7341: Error: selected processor does not support ARM mode `rbit ip,ip'
That compiler defaults to ARMv5T. That's obviously wrong for an i.MX 6,
which is a Cortex-A9 (ARMv7), but the correction applies for older
processors.
Change-Id: I56c276fa411977dd7cd867d62adf021e4909302c
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
QJsonValue, while comparing two QJsonArrays, should consult also length
of the arrays, because a different than null base pointer doesn't mean
that an array is not empty.
Change-Id: If76739355a4e74b842e836289565f98d95c006d5
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
QJsonValue, while comparing two QJsonObjects, should consult also length
of the objects, because a different than null base pointer doesn't mean
that an object is not empty.
Change-Id: Ibee1849ef9fed15d32f2c8f2aad9b053846e46b7
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Before this change such code:
QJsonObject o;
o["blah"];
would create property "blah" and assign null value to it, while
this code:
const QJsonObject o;
o["blah"];
would not. The change unifies the confusing behavior. Now reading
a non-existing property, is not causing a property to be added
in any visible way.
Internally QJsonObject stores a special hash of undefined, but
referenced values. Such reference is supposed to not live long,
only to the first compacting or assignment.
Change-Id: Ib022acf74ff49bad88d45d65d7093c4281d468f1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
The operator should always return an undefined values for an empty
object
Change-Id: Ic38f7660d77c64b2d001967bc5109df4185db74a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Fix tests widgets leaking widgets and ensure it stays
that way by adding a check to cleanup().
Task-number: QTBUG-38858
Change-Id: I77a81d823c68cf0b4e51c2da55b1c473d6e4170b
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
No actual reason for this test, except my curiority. Then again, it's
good to have this check, too.
Change-Id: I815fce7e4dbe76e21cac29beb1dbfc1083191d24
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
No actual reason for this test, except my curiority. Then again, it's
good to have this check, too.
Also checks that the last entry in the init_list "wins", which is
not how std:: containers work.
Change-Id: I4f7d1228f2b90a904b6c3f99e54afcd9970b723e
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
No actual reason for this test, except my curiority. Then again, it's
good to have this check, too.
Also checks that the last entry in the init_list "wins", which is
not how std:: containers work.
Change-Id: Ia284d093cd0029432372630e81657fb687b9516f
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
This fixes high CPU load for upload devices that don't generate
a constant stream of data. Their readData() function was called all the
time without returning actual data.
This was noticed when implementing an upload device that emits data in
a limited way for bandwidth limiting.
[ChangeLog][QtNetwork][QNetworkAccessManager] Fixed high CPU load when handling
POST/upload QIODevice that generates data on readyRead().
Change-Id: Iefbcb1a21d8aedef1eb11761232dd16a049018dc
Reviewed-by: Richard J. Moore <rich@kde.org>
[ChangeLog][QtWidgets][QLineEdit] The signal textEdited() is now
emitted when the user clicks the clear button created by
setClearButtonEnabled() as well.
Task-number: QTBUG-40287
Change-Id: Iacd303ffd1533f27cfa68a6120cdd370e3d31ddc
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The old unix locking code is no longer working on unix since it locks on
a file descriptor, but QSaveFile creates a new file, and as a result we
get the lock on the wrong file. Also there is no need to keep the lock
held only for reading as QSaveFile is atomic. It just needs to be held
when doing a read before writing.
As a result, since we don't hold the same lock, there could be a race
with an application running an older version of Qt if they are writing
on the same configuration file.
[ChangeLog][QtCore][QSettings] Fixed data loss while writing the config
to the disk fails.
[ChangeLog][Important behavior changes] The locking mechanism inside
QSettings has changed and is no longer compatible with the one of
previous versions of Qt. There might be corruption if two applications
running different versions of Qt are writing to the same config file
at the same time. You must also now have write permissions in the
directory containing the settings file in order to write settings
Task-number: QTBUG-21739
Change-Id: I0844a5e96c8bc1e1222a3dac6cc48170ca77fe1b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QRingBuffer is a fully inlined class used in many I/O classes.
So, it must be as fast and small as possible. To this end, a lot of
unnecessary special cases were replaced by generic structures.
Change-Id: Ic189ced3b200924da158ce511d69d324337d01b6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The default in QTextStream is to use the C locale, so default
QTextStream are not affected. When you set a QLocale on it, the default
was to use group separators (which is the QLocale default too). This
commit makes QTextStream respect a QLocale in which the
OmitGroupSeparators option had been set.
Task-number: QTBUG-39956
Change-Id: I00fbe12fca7f0287c7217deb487ded6582a03b52
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Otherwise, when interrupting the test half-way (e.g. in gdb),
the user's ~/.config/QtProject.conf would be modified.
Change-Id: Id582c4a3fbf0acbed460126fccf0d39b3a09758a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
They shouldn't exist in the first place. They exist in two cases only:
1) mistake by the user in the QLibrary or QPluginLoader constructors or
setFileName
2) as a kludge for setLoadHints before a file name is set (we need to
store the user's requested hints somewhere)
This is important for the second case, as otherwise all QLibrary and
QPluginLoader objects without a file name would share the setting.
Task-number: QTBUG-39642
Change-Id: Iebff0252fd4d95a1d54caf338d4e2fff4de3b189
Reviewed-by: David Faure <david.faure@kdab.com>
This commit makes replaces the loadHints member with a setter, a getter
and an atomic variable. The setter will not set anything if the library
has already been loaded.
Task-number: QTBUG-39642
Change-Id: Ibb7692f16d80211b52aaf4dc88db1a989738a24d
Reviewed-by: David Faure <david.faure@kdab.com>
Allow to alter the default configuration for categories by passing a
message type: All message types with lower severity are disabled in this
category.
This is useful for libraries, which shouldn't mess with the category
registry itself: Setting rules, a category filter ... might cause
conflicts and ordering problems, so this API should be reserved to the
specific application.
For the Qt categories, we have code in the default category filter that
disables the 'debug' category. However, this is hardcoded, and there's no
way so far for other libraries to get the same behavior. With this patch
one can get the same behavior:
Q_LOGGING_CATEGORY(DRIVER_USB_EVENTS, "driver.usb.events", QtWarningMsg);
[ChangeLog][QtCore][Logging] Added QtMsgType argument to QLoggingCategory
constructor and Q_LOGGING_CATEGORY macro that controls the default
category configuration.
Change-Id: Ib2902f755f9f7285d79888ec30e8f3cef95ae628
Reviewed-by: Alex Blasche <alexander.blasche@digia.com>
~QDebug() removes any trailing space if autoInsertSpaces() is true.
However, if one uses QDebugStateSaver the global autoInsertSpaces might
be false, but a space was added by a custom operator<<.
Explicitly check for this in QDebugStateSaverPrivate::restoreState. Remove
any trailing space if the local state asks for adding trailing spaces, but
the original one doesn't. Add a trailing space if the local state doesn't
ask for one, but the global state does.
Change-Id: I243b5c76d5ed2c1ec4820da35ab6e254da1551d9
Reviewed-by: David Faure <david.faure@kdab.com>
Passing this flag to QFileDevice::map() will allow writes to the mapped memory
without modifying the file that was mapped. These writes will be lost when the
memory is unmapped.
Change-Id: I7d46b044fc370585de8c06fdb4059f1f1be12d7d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This was prompted by https://git.reviewboard.kde.org/r/119221
Change-Id: Ia148f07f6d711df533693918bbedfa5e7dc02cd5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Uninstall option will uninstall the test afer has been executed.
It is useful when you are using your own phone to execute the tests.
Change-Id: I2a3f6c3a93099d70c98f9ce059da22c409b55843
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Several tests require test data to be deployed with the
application. The easiest way to achieve this on Android
is to add them to a qrc file and use the QFINDTESTDATA macro
to look up the files. This fixes several test failures
in the gui/text subdirectory for Android.
Change-Id: If944bb1fc93434a1b2d6487da829d21bd6b84e87
Reviewed-by: BogDan Vatra <bogdan@kde.org>
Compile on Windows, add command line options to activate the
various tests.
Task-number: QTBUG-38858
Change-Id: I38c6a9a6711831b2bd8b6ea051dd19615cc911a1
Reviewed-by: Alessandro Portale <alessandro.portale@digia.com>
When a dialog was parented on a native child widget,
its window handle was used as a transient parent.
This confused QPlatformWindow::initialGeometry() among
other things. Use top level window as is in Qt 4.
Task-number: QTBUG-40195
Change-Id: Ic82adc276175f92adde825fb2551274351e41f30
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
At the moment, there is no stream information in the cache file. This
can lead to a problem when current stream version differs from version
cache file written with.
As an example, if file written with Qt 5.1.1, QTimeDate in the metadata
stored as 13-bytes value, but Qt 5.2 and later can read additional 4
bytes which breaks following data, leading to network request just hangs
forever.
Adding stream version fixes this problem.
As cache format changed, cache version bumped.
Task-number: QTBUG-36219
Change-Id: I467d8c9fda82bcf9302192f51e7a00d2f6a9ff66
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
This prevents conflicts in case of link time optimizations or
precompiled headers are used since we don't include qglobal.h
in the generated code.
Change-Id: I4266c8ae38e6eafefd28b3bde5cb725a24d67ea0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Similar to QTextStream::reset(), this resets the stream format to the
defaults. Its primary use is inside custom operator<< implementations,
where you'd want to have a fixed format regardless of the current
stream state.
Change-Id: I421d76c61f164579bb90cf4195cc5376e2dcf0f3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Prevent the QGroupBox from changing the enabled state of
dialogs parented on it.
Task-number: QTBUG-40132
Change-Id: I91cc6ccf5ade0b3a491020ed947d4aceca62d7b6
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Prevent the splitter from adding them to the layout or showing
them.
Task-number: QTBUG-40132
Change-Id: Ife2be0bbd7e489570ef41f6f72a034b356c65f18
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
It was always constructing a QUrl from the string causing the warning
"Non-native QFileDialog supports only local files" with the
new QUrl-based implementations of getOpenFileUrl(), etc.
Change-Id: Idd9bb432a48865df137f8f39f53014dda150ffe9
Reviewed-by: David Faure <david.faure@kdab.com>
It can happen when the sidebar only has only one item, due to
"My Computer" being missing.
Change-Id: I2b38fef45139f1dfa20d88059e56185c3163a833
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
So that this method is at least called once in the test :)
Change-Id: I3b5fc6b7c464d9e56264c709cfa313d475004207
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
main.cpp(332) : warning C4307: '*' : integral constant overflow
tst_qpainter.cpp(1293) : warning C4305: '+=' : truncation from 'double' to 'float'
tst_qpainter.cpp(1474) : warning C4305: '+=' : truncation from 'double' to 'float'
tst_qtbench.cpp(155) : warning C4267: 'initializing' : conversion from 'size_t' to 'int', possible loss of data
main.cpp(68) : warning C4189: 'fontHeight' : local variable is initialized but not referenced
Change-Id: If6aadd50df7c5cf7d0f33791c9247730a47ddd27
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Instantiate the timer on the stack to prevent it from
interfering with other tests.
Change-Id: I91ffe23b502fcddaeb6d6d3f89ea3d27b083cdb0
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
We really do not need to do string parsing there.
Change-Id: Ie2277d9ff0d0445285b7108023941af111d9baca
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This revert commit de1d5815c1 which
wrongly fixed a typo. There is no typo because we use startsWith
with that constant.
Also added a test because the %{time} support was added in commit
93563952d0 but the test was missing
Change-Id: Ic96e6f21f989ca3a2905ec6c89b93d2627b77b40
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Broke tst_QMenu::statusTip by closing the menu while it should not. (and therefore, a QTimer::singleShot that fires while following test are running is making the test fail)
This reverts commit 50c04d6318.
Change-Id: Ib4ef8190f945b915fe268745cc64d471994c5e2d
Reviewed-by: Richard J. Moore <rich@kde.org>
This patch aims to implement the session management available on OS X.
Currently applicationShouldTerminate is just a go through that closes
everything and ends the application. The new implementation calls
first appCommitData and cancels the termination properly if required.
This means that if a user wishes to logout, Qt applications can now
cancel that like e.g. answering to Safari asking whether it is ok to
close because of a number of opened tab/window.
Task-number: QTBUG-33034
Change-Id: Icedc8590a1c0934d9bc87d3a43d6702a9903bfb8
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
I've also updated the qfont test so it passes on Android now. Note that
there are no suitable cursive/fantasy fonts on Android, so the regular
default "Roboto" (or "Droid Sans" on older devices) will be picked here
instead.
[ChangeLog][Android] Fixed font selection to prefer "Droid Serif" when
Serif style hint is set on QFont.
Change-Id: I294eebcc4d79410e435bdddce552acc6044753b2
Reviewed-by: Christian Stromme <christian.stromme@digia.com>
At the moment, it's possible to have 2 properties with the same name,
which doesn't make much sense. Notify the user about that so she can
react on it.
Change-Id: I4865b71730921b79ce9dd8abb0cc760b3f1dbfd8
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
The function gives a warning if an argument doesn't exist.
Change-Id: I6a4bbbaf2fd241ced06dc71edfe4ef69732606d1
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
Remove old message handler hack as we have a new and better api to
ignore warning messages.
Change-Id: Id967b2672fe3e3638db9977500118a19c2afb730
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
When the platform plugin gives us specific fallbacks for a
specific script, we need to respect this, and load the correct
font family regardless of which writing systems it supports.
This is especially important since the common script is adapted
to match surrounding, proper scripts, so characters such as
digits next to e.g. Hebrew text will be marked as Hebrew. On
stock Android, there is a single Hebrew font, and this would
previously be put in all fallback slots for Hebrew regardless of
what fallback fonts were dictated by the platform plugin. Since
this font does not support the digits, they would show up as boxes.
[ChangeLog][Android] Fixed common characters like digits and
punctuation showing as boxes when positioned next to non-latin
scripts.
Task-number: QTBUG-39377
Change-Id: I1555e208a8ddc587c0bbdbfff1600cafdd9442e9
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Allow the user to disable the quoting of QString, QByteArray,
QStringLiteral by passing a "noquote()" stream modifier.
This requires another flag to be added to QDebug::Stream. To
keep BC we're using the QMessageLogContext::version field
to differentiate between QDebug streams created by earlier
versions.
Task-number: QTBUG-37146
Change-Id: I9b215eabfcfd754af16ea87f3ef928d698e37d77
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This property is used to automatically hide tab bar if it has only one
tab.
Originally-by: Denis Kovalskiy <denimnumber1@gmail.com>
Change-Id: I6967f760010fa55bad6a5986c29abe7ccf625cf8
Reviewed-by: David Faure <david.faure@kdab.com>
The check has to detect if boost header is present in the system we are
building for.
Change-Id: I700a11df208c8852ba094d8bff387ad21fa309b2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
