Use the DotMatchesEverythingOption for all places
where we interpret .pro files, to increase compatibility
with QRegExp.
Change-Id: I347d6b17858069f3c9cedcedd04df58358d83f27
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The Qt version was added in 5.14 "for use as eventual replacement for
QString::SplitBehavior." Move another step closer to that goal.
Change-Id: I3f1b836cfb47bba0fdc27f2c3aa7b0576d123dca
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This can be expensive. We don't expect files to be added to the
directory while qmake is running, and if that happened, the result would
be unpredictable anyway.
Change-Id: I5db93132046c1284130bbe51ce1ecd2a14665206
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is preparation of moving from QLinkedList to std::list, which is in
preparation of deprecating QLinkedList.
Change-Id: Ief259bc8c7178be5ca04812c6890cf65d86c069d
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Mark obsolete functions in QString as deprecated so they can be removed
with Qt6:
- QString::sprintf()
- QString::vsprintf()
Change-Id: I9b7748db95291c34b95ff3ad3e3aabc8215aeaae
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
It's 160ish lines and adequately isolated. Still, it *might* be
contributing to compilers being slow (unlikely though that seems) so
seemed worth tidying up anyway.
Task-number: QTQAINFRA-2117
Change-Id: I9e55e677552c273fdf3480ccefc229fd6fd2b66a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
make sure the access is properly scoped and does not recurse.
Change-Id: Iaa345cd2771811281b9ed6f634c70235a78c3c33
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
at the time this patch was conceived, it was meant as an exercise in
getting rid of usages of ProString::toQString(m_tmp). however, this was
meanwhile superseded by use of toQStringView().
but the change itself should have been done a long time ago already, and
there is no harm in going through with it.
on the way, this also unifies and fixes some of the error messages.
Change-Id: I337aff994c508df783df4794c3fa0762d83a691b
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
... and make it explicit where we can't do that for semantical or
backwards compat reasons.
most urgently, this fixes an assertion failure when $QMAKEFEATURES
contains empty paths (e.g., due to a trailing semicolon).
notable observation: QByteArray::split() has no argument for the split
behavior (it always keeps empty parts).
Task-number: QTBUG-47325
Change-Id: I72d4b2e154a2ed1802cfa98fb4a5211a68e43231
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
sync-up with qt-creator; no effect on qmake.
comment on cherry-pick: this is actually a lot more than a cherry-pick,
because the dual VFS needs to deal with the file ids which were
concurrently introduced on the qmake side.
Change-Id: I2c1eb16c97526fa275a1c6a2eae9266d385859ac
(cherry picked from qtcreator/424639ecac9d2e404d2bfaff7f46b45ed98664b8)
(cherry picked from qtcreator/a8010b0fff47d903d4a1f80e3adb1a2ef41beb33)
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Thanks to QTBUG-61373, this qmake function was called with
/usr/local/5.10.1 as baseDir, which isn't absolute, leading to an
assertion failure. We could raise the error within qmake but it
proved easier to simply resolve any non-absolute baseDir using PWD,
before trying to use it as an absolute path.
Did the same for $$absolute_path(). Documented both. Adjusted the
assert that caught this to report any non-absolute path that upsets
it. Added simple tests, fixed an existing test.
Task-number: QTBUG-66156
Change-Id: Icfef2e2f5b236e071177c9beffa38d71bf404292
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
For Q_OS_WIN, a path is only truly absolute if it includes a drive
letter; merely starting with a slash is not enough. (We can't support
UNC paths, so don't even try: qmake runs various commands in the
source directory using CMD.exe, which doesn't support UNC as PWD.)
This requires, when resolving a path relative to a root, transcribing
the root's drive to such not-quite-absolute paths.
Changed QMakeGlobals, $$absolute_path() and $$relative_path() to now
use IoUtils::resolvePath() rather than delegating to QDir's absolute
path method, since that doesn't correctly recognize the need for a
drive letter (and qmake did run into problems with some paths, from
splitPathList and a failing test, as a result).
Moved existing ioUtils tests for handling of relative / absolute paths
out into separate functions and expanded significantly. Fixed some
existing tests to use an absolute path where one is needed; added two
tests involving driveless (but rooted) paths; and fixed the test init
to set a value for QT_HOST_DATA/src property (the lack of which lead
to an assertion failure with this fix).
Task-number: QTBUG-50839
Change-Id: I2bfc13c1bfbe1ae09997274622ea55cb3de31b43
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Conflicts:
examples/examples.pro
qmake/library/qmakebuiltins.cpp
src/corelib/global/qglobal.cpp
Re-apply b525ec2 to qrandom.cpp(code movement in 030782e)
src/corelib/global/qnamespace.qdoc
src/corelib/global/qrandom.cpp
src/gui/kernel/qwindow.cpp
Re-apply a3d59c7 to QWindowPrivate::setVisible() (code movement in d7a9e08)
src/network/ssl/qsslkey_openssl.cpp
src/plugins/platforms/android/androidjniinput.cpp
src/plugins/platforms/xcb/qxcbconnection.cpp
src/plugins/platforms/xcb/qxcbconnection_xi2.cpp
src/widgets/widgets/qmenu.cpp
tests/auto/widgets/kernel/qwidget_window/tst_qwidget_window.cpp
Change-Id: If7ab427804408877a93cbe02079fca58e568bfd3
the replacement value may well constitute the whole output string - this
is in fact common, given this rather typical usage pattern:
BAR = $$replace(FOO, -flag, -otherflag)
this must be considered when constructing the return value.
compare 3c8134958c.
as of now, this is irrelevant, as QString::replace(QRegExp, QString) will
always memcpy the replacement into a detached copy of the target, but one
never knows.
Change-Id: Ia1f271f45023746040fc28ce6d88a6609e05e5c2
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
technically, we should not rely on the i/o classes not storing the
strings beyond the instantiated object's life time.
Change-Id: I0990769b3cf86860184869036c096c531160e9be
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
the m_tmp array is a member, so the index toggle for accessing it also
needs to be one - otherwise, odd iteration counts will defeat the
mechanism.
Change-Id: If7a800ed5a4b4168625daf1ebbd5d2d164569d8e
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
... in $$basename(), $$dirname(), and contains(). the latter case is
marginal, as it only applies to mutuals which are regexes, which i don't
remember ever seeing used.
QRegExp saves a copy of the matched string, so it's necessary to
alternate between two temporaries to avoid detaching. we already
did that in most places.
Change-Id: I97b8294585c17c76d1756f83971f42cb88353af0
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
in most cases, the main advantage is not using toQString(m_tmp), which
reduces the possibility of raw data leaks. in cases where we used
toQString() without temporary, this is a slight optimization.
Change-Id: Ib343acffd383aa2c4fefab75fb52762fb534dfc6
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The strings remember in which file they were created/assigned.
However, this used a non-counting reference to a ProFile, which could
become dangling. If a subsequent ProFile re-used the exact same address,
a string's source would be mis-identified, which would be fatal in
conjunction with discard_from().
Since we actually need only a unique id for comparison, let's use an
integer for that.
Task-number: QTBUG-62434
Started-by: Simon Hausmann <simon.hausmann@qt.io>
Change-Id: I395153afaf7c835d0119690ee7f4b915e6f90d4a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
On non-windows platforms, we use the "-p" parameter of install(1) to
preserve the last modification timestamps of files. On Windows the use
of copy does not preserve them. As a cross-platform solution, this patch
introduces a simple built-in install command in qmake to copy files.
Task-number: QTBUG-59004
Change-Id: I3064d29a2b8c7b009a1efbf8f00b84c079ea5417
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The parsing code anyway operated on a QByteArray created from
toLatin1(), so expose this to the user by providing a QLatin1String
overload.
Also provide a QStringView overload, since we can. Port one user (in
qmake) to the new overload.
[ChangeLog][QtCore][QVersionNumber] Added QStringView and
QLatin1String overloads of fromString().
Change-Id: Idbff44c3997f5cfa86ea1bce8b3da4b700a3d9cc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add ProString::toQStringView() to avoid creating QStrings just to pass
them to QString::arg() (single-arg; multiArg() does not, yet, accept
QStringViews).
I could have used the existing toQStringRef() function, but QStringRef
is a tad more complex to copy and quite a bit less future-proof.
Change-Id: I344c46f301768e844c487d36ce3e6cb276de8843
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
qmake really lacks version comparing functions:
users either use ugly constructions to compare versions
by components, such as
greaterThan(QT_CLANG_MAJOR_VERSION, 3)|greaterThan(QT_CLANG_MINOR_VERSION, 4):
or even incorrectly compare versions as strings:
!lessThan(apple_clang_ver, "5.1")|!lessThan(reg_clang_ver, "3.4"):
Add test functions versionAtLeast and versionAtMost which use
QVersionNumber to compare version numbers by components.
Change-Id: I65e6b3c296d0301d544b7e38bf3d44f8d555c7fc
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The code in question is obviously checking for support of QProcess, not
for general bootstrap mode. You can manually disable QProcess, in which
case it is still not available after bootstrapping is done.
Change-Id: Ia99810b8900621911a31912034358a01af4f18a0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
On POSIX compliant platforms, the default precision we apply to
preserving time stamps is seconds. However we can do better and use
utimensat() - if available - to increase the precision to nanoseconds.
The values are provided by statbuf's st_mtim. This is guarded for
compatibility with older systems, similar to commit
494ced1329.
Change-Id: I6928660230d84f8511bf0f58e268906d2e575e04
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
this moves us another step towards the "outer" configure doing just
minimal bootstrapping of qmake.
a challenge here was that so far, qmake itself needed qconfig.cpp. this
was replaced by usage of a qt.conf file instead of compiled-in values.
however, to make the executable still self-contained, that qt.conf is
embedded into it (by simple appending of a fixed signature and the text
file).
the qmake with the embedded qt.conf is not used for the qt build itself,
which instead relies on the qt.conf in bin/ as before. however, due to
the missing built-in values, this file now needs to contain more
information than before. but except for a minimal version that is needed
to start up qmake/configure at all, that file is now also generated with
qmake. as some of the newly set up properties are subsequently used by
configure itself, qmake gains a (deliberately undocumented) function to
reload the qt.conf after it's fully populated.
unlike the old implementations, this one doesn't emit redundant qt.conf
entries which match the hard-coded fallbacks. omitting them leads to
leaner files which are more comprehensible.
Started-by: Paolo Angelelli <paolo.angelelli@qt.io>
Change-Id: I4526ef64b3c89d9851e10f83965fe479ed7f39f6
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
otherwise, infinite loops can result, as amply demonstrated by the new
configure (which duly replicated the old configures' behavior ...).
QMakeEvaluator::evaluateBuiltinExpand() now returns a VisitReturn like
all other evaluate*() functions. the string list return value is now an
out parameter; i used a reference instead of a pointer to avoid
adjusting 56 usages of it.
Task-number: QTBUG-13964
Change-Id: I51ca7df8d694c6ffe9d9899cba414b1b46f5ce95
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
when the file's effects are discarded, the mention of the file should be
as well.
Change-Id: I894b7e2b887dd34d18533b197bfa9d0d84d647e7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
the normal mode forces the prompt into a pattern which may be
undesirable.
Change-Id: I01689c7a6573415801862348b32bafc6a609ed4a
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We can not improve the result from JSON parsing without changing API,
so instead recalculate the line and column based on input and offset.
Change-Id: I54149233f71023aa5d30deff854d6f3406c5c48c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
the autotest was also broken, because it was created by pasting the
bogus message into the result ...
Change-Id: I02b8663b96c7d96cdb3c19639e2213e49fd2bcec
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
so far, we "downgraded" only explicit error() output, but other errors
may happen as well while doing semi-exact evaluation of .prf files - at
least hypothetically.
amends 08d0cb6f8e.
Change-Id: I32819a569dbed2dbdb37c5c23bf4a5a18d3c64ea
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
(cherry picked from qttools/ea1a5c3534f089c0e704808a0fb029eda8f753b4)
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
this function discards all values that come from a specific file. it
will be needed for configure bootstrapping, but is too obscure to
document it for general use.
Change-Id: I62c18aeb1847712e33d0599dbb0b90ffa1722438
Reviewed-by: Lars Knoll <lars.knoll@qt.io>