There is a known bug where duplicate textChanged signals are
triggered on backspace/delete. The bug has been seen on Windows,
Mac, and Linux. Gabi showed that this duplicate signal is caused by
two calls to finishEdit(), one direct and one nested,
in QTextCursorPrivate::remove().
To attempt a fix, I removed the direct call and do not change the
nested call. This change only affects text buffers when they
receive remove commands.
This seems to fix the problem, shown by the test project
uploaded to the bug tracker and also in countTextChangedOnRemove
in tests/auto/widgets/widgets/qtextedit/tst_qtextedit.cpp.
Further analysis of finishEdit() and QTextCursorPrivate::remove():
finishEdit() calls signals contentsChanged() as long as a valid block
is being edited. Remove() calls finishEdit for all non-table edits,
so finishEdit will be called for most cases.
Methods in the public QTextCursor all seem to set adjusted_anchor
and anchor, none reading it directly, so I haven't found publicly
observable consequences to "adjusted_anchor = anchor = position;".
Task-number: QTBUG-15003
Change-Id: Ic35f25ee81c4007867b47cd8be03c146a673f86d
Reviewed-by: Graham Coleman <ravelite@gmail.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Make it possible to match messages by a pattern.
Change-Id: I713312e86db5471755459f1ecc43e8f1ac7a95fb
Reviewed-by: Jason McDonald <macadder1@gmail.com>
need to leave some items out like media folder access, as this is not
available by default and also requires certain capabilities to use
those.
Furthermore updated the tests for sandboxing as well as skip cmd.exe
related tests as that does not exist on WinRT.
Change-Id: I992b1e195b79615bea0be4f84f56cfb8f0d902bf
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Currently network is only required to gather the host info for one
test case. That does not justify to disable all other tests, which can
provide useful information on the state when doing a port. Hence
disable that testcase if no network is available.
Change-Id: I202ef49b3e07ae69ec85ee0432ae0a771a90e816
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
WinRT doesn't use the Windows Timezone backend, so don't build the
Windows test.
Change-Id: I32620546de3ad1f19402cc1359f8038200c915ec
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
This should be using qputenv; putenv is deprecated on MSVC.
Change-Id: I7c27cf5f7955624fa3553b7a34ab11c6fae462b8
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
The current synchronization mechanism was racy: decrementing waitingThreads
and then hoping that the wakeOne will wake a thread before its expiry
timeout happens. In other words, on timeout, a just-assigned task would
never run. And then no other task would run, if maxThreadCount is reached.
Fixed by using a queue of waiting threads (rather than just a count), and by
moving the wait condition into the thread itself, so we know precisely
which one we're waking up, and we can remove it from the set of waiting threads
before waking it up, and therefore it can determine on wakeup whether it
has work to do (caller removed it from the queue) or it expired (it's still
in the queue). This is reliable, whereas the return value from QWaitCondition::wait
isn't reliable, when the main thread has already decided that this thread
has work to do.
Task-number: QTBUG-3786
Change-Id: I1eac5d6c309daed7f483ac7a8074297bfda6ee32
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
I don't think I ever worked on a project of non-trivial
size that didn't at some point add a QSignalBlocker.
This commit adds code, tests and documentation. Later
commits will convert naked blockSignals() calls to use
QSignalBlocker.
The implementation is purely inline to avoid the heavy
overhead of cross-dll function calls for this miniscule
task. This should not be a problem because QSignalBlocker
only uses public API and a pattern that we anyway need
to keep working until Qt 6, at least, so even changing
the implementation later will be no problem as the old
implementation lurking in non-recompiled code will be
acceptable, too.
This implementation is an evolution from KDTools'
KDSignalBlocker, with the following changes:
- Implements unblock() and reblock()
- Uses the return value of blockSignals() instead of a
separate signalsBlocked() call.
Change-Id: I1933dfd72a0f5190324be377cfca3c54cf3d6828
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
[ChangeLog][QtWidgets][QAbstractSpinBox] QTBUG-5142 - This will
allow a group (thousand) separator to be shown in QSpinBox
and QDoubleSpinBox widgets.
Task-number: QTBUG-5142
Change-Id: I2e23f5f83c93bb092a2dbd784e06d17d40d42909
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Move the test for QAbstractPrintDialog from widgets into printsupport
Change-Id: Ia7595fa650a7ad565df3090207500ed06564e842
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Required for QQuickText & friends to implement image resource handling
in a clean way - to get rid of QQuickTextDocumentWithImageResources and
eventually make QQuickTextEdit's document interchangeable.
Change-Id: I97314a6c3e2d5726539d5722795a472631388cb0
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
After Ic12de12ec51c20de52d040514e90be5e783add43 this functionality
was broken. Added an autotest.
Task-number: QTBUG-34159
Change-Id: I8f41b7073dc57fea855ab87796f09e8a91520d13
Reviewed-by: David Faure <david.faure@kdab.com>
The default link color used to be resolved to the link color of the
application palette, but got lost during the Qt 5 modularization (see
commits 7351a43 and 3f9a7f9).
Task-number: QTBUG-28998
Change-Id: I7f07427f6c03f83c557100938ad9f7a39349d303
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
the method returns true if there is not such field.
Change-Id: I25db8de4561d3e0604f3e64edc1810140ba4aad2
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
We change the behavior slightly from the initial implementation in
5.1. Forcing the use of native child widgets is causing massive
performance issues so instead, we attach the embedded QWindow directly
to the root window. The only exception is QScrollArea and QMdiArea
which still enforces native windows for the entire parent chain
to make clipping and stacking work.
Task-number: QTBUG-34138
Change-Id: If713637bd4dce630552ace2f8ad6b2e86c063721
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Introduce QStyleHintsPrivate and introduce internal
setters called by QApplication.
Task-number: QTBUG-33991
Change-Id: Id61f8b1e2b5c9cfd7b4713aaded66e93e6f63719
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Use the correct identifier for the OS X operating system.
Change-Id: I7158a6b77e5e7418bc6b0a565f003500820a346d
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
Reviewed-by: Eike Ziller <eike.ziller@digia.com>
- Fixed issues when having multiple devices connected at the same
time.
- Fixed hard coded paths
- Removed not existing function call, which caused test run to exit
too early.
- Added possibility to add and connect to device, configured as env
variable.
Task-number: QTQAINFRA-641
Change-Id: I8c1e003ce4ffbc9fdd9572dc55eef8fe92330cba
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
The handling of the null QPolygonF case was not correct as it would
always be seen as valid. This ensures it is treated in the same way as
QPolygon when it is in fact null.
[ChangeLog][QtGui][QPolygonF] When a QVariant holds a QPolygonF()
then it will be correctly seen as a null QVariant.
Change-Id: Icae34f513c3a8e1dd3f50cb64a3d13ae7c636cc4
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
The RFC 2822 date format should always use en_US locale for month and
day names instead of whatever the system locale is. Also remove some
duplicate code.
Change-Id: Ia2f7ee405b4e0e2f04980301783b9488628da73f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Added clarifying explanations to the QEXPECT_FAIL statements.
Now it should be easier to understand what is expected from the parser.
Change-Id: I1dacd60564f292d9ce43de7254525c34fa7cdc55
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Changed the processing of non-character code handling in the UTF8 codec.
Non-character codes are now accepted in QStrings, QUrls and QJson strings.
Unit tests were adapted accordingly.
For more info about non-character codes,
see: http://www.unicode.org/versions/corrigendum9.html
[ChangeLog][QtCore][QUtf8]
UTF-8 now accepts non-character unicode points; these are not replaced
by the replacement character anymore
[ChangeLog][QtCore][QUrl]
QUrl now fully accepts non-character unicode points; they are encoded as
percent characters; they can also be pretty decoded
[ChangeLog][QtCore][QJson]
The Writer and the Parser now fully accept non-character unicode points.
Change-Id: I77cf4f0e6210741eac8082912a0b6118eced4f77
Task-number: QTBUG-33229
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add qjson* implementation files from corelib/json
to the qmake build. Add a read-only compile mode,
enabled by defining QT_JSON_READONLY.
Add qmake built-in function parseJson(file, into)
which parses a json file into the given variable.
qmake uses a flat key -> value-list implementation
for storing variables, which means that some hackery
is need to represent arbitrarily nested JSON. Use a
special "_KEYS_" variable for arrays and objects:
Arrays:
["item1", "item2"]
$${array._KEYS_} -> 0 1 2
$${array.0} -> "item1"
$${array.1} -> "item2"
Objects:
{ "key1" : "value1", "key2" : "value2" }
$${object._KEYS_} -> key1 key2
$${object.key1} -> value1
$${object.key2} -> value2
Change-Id: I0aa2e4e4ae14fa25be8242bc16d3cffce32504d2
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Check if the datetime is valid before converting it to a different time
spec. If it is invalid then just change the spec to keep behavior
consistent with 5.1.
Task-number: QTBUG-34020
Change-Id: I6630ec1d50f810a2178ab3222bd32af018085f81
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Change the default output of the logging framework to prefix messages
with a 'category: ' in case the category is not "default", so that e.g.
QLoggingCategory cat("qt.core.codes.windows");
qCWarning(cat) << "MultiByteToWideChar: Cannot convert multibyte text";
will print
qt.core.codes.windows: MultiByteToWideChar: Cannot convert multibyte text
while output from qWarning etc will show unaltered output. This should
help users to discover categories, and to group output together.
Change-Id: Iac2e1514f7dc5671966c36a440a119c857564cfc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: hjk <hjk121@nokiamail.com>
the function is a trivial wrapper for the QTextCodec one, so there is
little point in explicitly testing it.
Change-Id: I0c4950e5a54b7ffff9ba73a001cedb517497a596
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There are a few problems with the Quadruplor setup in Qt 5.
First of all, it doesn't work with modules, since it has
a hard coded library dependency list. Second of all, it
duplicates the application template, so changes need to also
be duplicated. This often gets out of sync. Third of all,
it duplicates a lot of deployment rules which are now contained
in androiddeployqt.
Task-number: QTBUG-33996
Change-Id: I0630a38aeba7d0075df8fae671abc311fc36de61
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
No need to default to yet another SDK here. This is a left-over
from Necessitas, which supports versions down to android-4.
Change-Id: I2e79be641288c14f92c205b30f2db6db793d783f
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
This fixes QStatusBar so it is back to the original behavior of only
emitting the signal when the message has changed. The intention of the
code that caused this to break in the first place is kept intact.
Change-Id: I2f57c2abec01246ed924626ad954ac9ff9889855
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
QAccessibleImageInterface already has an API to return the
size of the image.
This function ensures that their API's are not overlapping.
Alternatively, we could merge both functions into
QAccessibleImageInterface::imageRect(), but the assumption is that
images change position more often than their size.
Change-Id: I55c25cdff187b9f497828f04cfd5f969cfbc451f
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
This is a performance and memory optimization which also fixes bugs
that are related to creating widgets, file system models etc.
despite using platform native dialogs. Similar to
785bc64f8e for QColorDialog.
Task-number: QTBUG-33039
Change-Id: Ia1aa7ec1f43b47006b9ebd377aed15c958538a17
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
When the QPolygonF type was added to QMetaType it did not bump up the
values in load() and save() for QVariant.
Task-number: QTBUG-33981
Change-Id: I7ad99cda70620c5449c15527c3daf920972d047f
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The test is randomly failing on CI when ran on 10.7.
Task-number: QTBUG-31454
Change-Id: I79fce9a37616c6abaee960e338f8eea8fe6f31cf
Reviewed-by: Jani Heikkinen <jani.heikkinen@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@digia.com>
Position cursor outside and move once more.
Task-number: QTBUG-33972
Change-Id: If060f1359361981cf1243d8d2a4ebef181689d74
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
This patch merges the two classes that were used to make
dock widgets accessible into one.
The title bar does not need to be represented by its own
accessible object.
In addition the buttons on the toolbar are now labelled.
Task-number: QTBUG-33946
Change-Id: Id90d8c09f15ed683e64dbe3f6ac55bca7a0b300f
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
The pointer can be null. Going trough the reference invokes undefined
behavior here.
Change-Id: Ia84e4e732cdcbbaee0f5f0679765d18069ea8b2d
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
The cursor needs to be within the view from start on Mac.
Task-number: QTBUG-33973
Change-Id: I313c9fd1c3a917e135a92497f1818d1b0d8b7698
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
When CSS was set in the head tag then it was not being inherited by the
child tags. This ensures that the inhertiance happens and that the deeper
the CSS is set then it will ensure that it has precedence over the ones
set on the parent.
A test is added that shows the standard inheritance from the head tag and
the precedence from child tags in effect too.
Task-number: QTBUG-28770
Change-Id: I30be3ec141b2cd8d6e0db8a92669aed34da93b33
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
This makes it so that two QVariants created from the same
QIcon (or from QIcons that were assigned one from eachother)
compare to true.
Unfortunately creating two QIcons with the same path and
comparing them still gives false as they have different cacheKeys
Change-Id: Iafe2bc4082a830f9c6469f083c26a7abbe4b35c5
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
