Because fonts are bigger on BlackBerry than those assumed when the test was
written, explicitly adjust the font size on this platform.
Change-Id: I6a23c28c2d32edf744dd5de09ea0a97fd5f9b6d6
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Some test cases rely on the fact that show() is not fullscreen, which may not
be true for some platforms. Explicitly make use of showNormal() to avoid
full-screen show on these platforms.
Change-Id: Ie62fe21bf0f466c561a27cffda99d0201b4a45af
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Bernd Weimer <bweimer@blackberry.com>
Reviewed-by: Kevin Krammer <kevin.krammer@kdab.com>
There has been frequent failures with CI, especially with OSX 10.7.
These seems to work ok in CI node when ran alone but CI is running
those in parallel with some other tests, and this is causing errors,
most likely due to lost focus.
Change-Id: Ic4151099c27a4b5d91778c9b13e88d2d661e8a0d
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Keep the content aligned to the bottom when the view has been scrolled
to the bottom and the content is relayouted (for example due to
sorting).
Task-number: QTBUG-30653
Change-Id: I9513e295e276d25ff2068036cd80dbf91314fe84
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Before it would skip out a row depending on the size of the tableview.
Now it will show the next set of cells for the direction it is going in.
Change-Id: I02926d0b2187ffafffb63f7fff43c233b4d7d6af
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Remove all trailing whitespace from the following list of files:
*.cpp *.h *.conf *.qdoc *.pro *.pri *.mm *.rc *.pl *.qps *.xpm *.txt *README
excluding 3rdparty, test-data and auto generated code.
Note A): the only non 3rdparty c++-files that still
have trailing whitespace after this change are:
* src/corelib/codecs/cp949codetbl_p.h
* src/corelib/codecs/qjpunicode.cpp
* src/corelib/codecs/qbig5codec.cpp
* src/corelib/xml/qxmlstream_p.h
* src/tools/qdoc/qmlparser/qqmljsgrammar.cpp
* src/tools/uic/ui4.cpp
* tests/auto/other/qtokenautomaton/tokenizers/*
* tests/benchmarks/corelib/tools/qstring/data.cpp
* util/lexgen/tokenizer.cpp
Note B): in about 30 files some overlapping 'leading tab' and
'TAB character in non-leading whitespace' issues have been fixed
to make the sanity bot happy. Plus some general ws-fixes here
and there as asked for during review.
Change-Id: Ia713113c34d82442d6ce4d93d8b1cf545075d11d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
We cannot access children directly, since that won't ensure that
the pending sort is executed. However, the functions we need are
there already and actually makes the code nicer.
Task-number: QTBUG-29903
Change-Id: I6899284275dd79b991896a5f08486b58d95f819d
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Just like other functions this function should emit expanded and
collapsed.
A part of fixing
Task-number: QTBUG-8176
Change-Id: I6d801f61e6f0cb8836634cc52f0be2b610f6c728
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
When we call call collapase we emit collapsed. Therefore it should
also be emitted on collapseAll()
This partly solves:
Task-number: QTBUG-8176
Change-Id: I20c1388fcbbb60d12debb4a0b3b0d9fed41e2563
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
When we call QTreeView::expand expanded is emitted.
For the same reason we should emit expanded on expandAll()
This partly solves:
Task-number: QTBUG-8176
Change-Id: Ie85e724eec50980c68f626ec47dec5c1e08cc085
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
It can be used to determine whether expand() should really expand.
Change-Id: If79d8c295a4ca1356e60051682b227524a065126
Reviewed-by: David Faure (KDE) <faure@kde.org>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
A itemview item with its flags set to Qt::NoItemFlags is considered
disabled, and therefore should not cause the activated signal
to be emitted.
Task-number: QTBUG-20490
Change-Id: If824505c46f4fcadb9265ad6d1e9337f0cee32cf
Reviewed-by: David Faure (KDE) <faure@kde.org>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Fully decorated windows cannot be smaller than 160x30 (Large fonts).
Enlarge Windows or remove Window frame to get rid of decorations.
Task-number: QTBUG-28611
Change-Id: Idb6ee94fb8d0760d5f97042b3084557f11e9fdf9
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
These types are either built-in or 'automatically declared' and so
don't need to be explicitly declared as metatypes.
Change-Id: Ibe8e2ec867afb4051a3c7eef806d9cd86945928b
Reviewed-by: David Faure <david.faure@kdab.com>
As they are built-in, they are effectively registered at compile-time
already.
Change-Id: I7ae6ba16088eab5d19213fa7b07c2a7760988a86
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
This patch allows single selection to be cleared with the normal
control modifier. This affects e.g QTreeView and QListView.
Task-number: QTBUG-8836
Change-Id: I7fd50b987acc3552b36657409568192763257536
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Somehow this bug managed to stay hidden until the introduction
of QFusionStyle.
Task-number: QTBUG-27675
Change-Id: I86b049b869e9f2951426dc67a485ad7c60ef1403
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
geometryengine.cpp: In member function 'void
GeometryEngine::drawCubeGeometry(QGLShaderProgram*)':
geometryengine.cpp:159:93: warning: cast to pointer from integer of
different sie [-Wint-to-pointer-cast] geometryengine.cpp:167:95:
warning: cast to pointer f rom integer ofdifferent size
[-Wint-to-pointer-cast]
benchmarking.cpp: In member function 'void TestBenchmark::multiple()':
benchmarking.cpp:85:9: warning: variable 'result' set but not used
[-Wunused-but-set-variable]
benchmarking.cpp: In member function 'void TestBenchmark::series()':
benchmarking.cpp:120:9: warning: variable 'result' set but not used
[-Wunused-but-set-variable]
qstandarditemmodel.cpp:2717:45: warning: unused variable 'd'
[-Wunused-variable]
qxcbconnection.cpp: In member function 'xcb_timestamp_t
QXcbConnection::getTimestamp()': qxcbconnection.cpp:930:40: warning:
suggest parentheses around assignment used as truth value
[-Wparentheses]
tst_qguiapplication.cpp: In constructor
'BlockableWindow::BlockableWindow()': tst_qguiapplication.cpp:340:9:
warning:'BlockableWindow::enters' will be initialized after [-Wreorder]
tst_qguia pplication.cpp:339:9: warning 'int BlockableWindow::leaves'
[-Wreorder] tst_qguiapplication.cpp:342:12: waring: when initialized
here [-Wreorder]
tst_qsqltablemodel.cpp:570:10: warning: unused parameter 'value'
[-Wunused-parameter]
tst_qabstractitemview.cpp:1546:8: warning: unused parameter 'index'
[-Wunused-parameter]
Change-Id: I49c88547182e4669cfde2c2536403fc5573ca2da
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When the sections has been resized we need to calculate new values
for the section start-positions. Otherwise we break visualIndexAt
and sectionPosition.
This fixes a regression introduced in
b800d8b94a
Change-Id: I148dbf44f742208787ed59b70d82b8048d721e90
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Get rid of QWidget-centric QMacStyle::eventFilter() and implement the
fade out animations for scrollbars using QNumberStyleAnimation-based
QFadeOutAnimation.
Change-Id: I2000fa50d46b153e981ceafc12a53932a196382e
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
Using
git ls-files -z | xargs -0 sed -i 's/ \+$//'
in the relevant directories.
Change-Id: I861ef9952fb32ed2db9ec8b67864ec7d0d61f0f2
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
QItemDelegate and QDataWidgetMapper use the WRITE method on the USER
property to set a value in a widget. This did not work for QComboBox
whose USER property currentText lacked a WRITE method.
This change adds the missing setter and flags it as the WRITE method.
The setter setCurrentText() simply calls setEditText() if the combo
box is editable. Otherwise, if there is a matching text in the list,
currentIndex is set to the corresponding index.
Test included.
Follow-up to 816c554017 which restored
currentText as the USER property.
Task-number: QTBUG-26501
Change-Id: I5f2f999e60b09728ca03ead4e28fe36d1f3ee189
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This is similar to the patch 05aa8c6c12
which was applied to QListView.
Task-number: QTBUG-26548
Change-Id: I38ff07230673a93a32b01a7f1951d0378d94185b
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
We have a new style Fusion that will replace these styles.
They will be moved to a separate
module rather than included in platforms that do not need them.
Change-Id: I51ebbcad5406e99130e5b12e62ba624d1489088c
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
The original bug was reported as a different test failing. Looking
through the CI logs, that test now always passes, but fastScroll fails
unstably. The fastScroll test is already excluded on Mac, but the patch and
reason for that predates the public git history.
This is a regression since marking the entire test as insignificant,
and shows why insignification of tests should be as narrow as possible.
Narrow this one now.
Task-number: QTBUG-21098
Change-Id: I0d6c22e422af190c9e6331e123db38022af28e4b
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
I can't find any failures in the CI logs, as reported by the bug.
Even if there is still an unstable test here, it is not appropriate
to mark the entire test as insignificant, as that hides regressions
in the entire class.
Task-number: QTBUG-23638
Change-Id: I1aeaf6e725bf28e9ac03c9330a67e51241b9272b
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Added ThemeHint::TabAllWidgets as a mean to access that platform
specific bool. The default implementation returns always true when
querying QPlatformTheme::themeHint().
Several auto-tests had to be updated to reflect for qt_tab_all_widgets'
type change. One XFAIL removed from tst_QApplication::focusChanged().
Task-number: QTBUG-24372
Change-Id: Ie1f0486c19898fe54c53aa4a27e378485075e512
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
The solution is similar to that
in b84e180263 which affected
QSortFilterProxyModel.
Task-number: QTBUG-25370
Change-Id: I6bbb9d9786bcb2c9fa8027ab8a7cc13664784b8d
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The private method is called in several places in QListViewPrivate,
but before this patch, the implementation in QAbstractItemView was
called. This meant that the options were not set properly,
resulting, for example, in icons in icon mode being laid out in
list mode (on the left and small).
This is a regression resulting from
8eab9cbce2 and
3578e05b29. Other views are not
affected in a similar way.
Change-Id: I753cb99410e367266753eaf2fa43361b9212ab96
Reviewed-by: Pier Luigi Fiorini <pierluigi.fiorini@gmail.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
QAIM::createIndex() took either int or quint32, but QMI::internalId()
returned qint64.
In the new interface, createIndex() takes, and internalId() provides,
integers of type quintptr.
This matches the storage size of the void* in the model index and
avoids truncation.
Remove the
createIndex(int, int, quint32) and
\obsolete createIndex(int,int,int)
overloads.
This makes a literal 0 in the third parameter ambiguous now.
The solutions have been noted in changes-5.0.0.
Change-Id: I0a0ecd8430eaf695129a4d09d14d4e30745485c4
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Change copyrights and license headers from Nokia to Digia
Change-Id: If1cc974286d29fd01ec6c19dd4719a67f4c3f00e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
If you had a QTreeView with expandable items, if you tried to expand and while
the animation was still running you'd try to collpase the node,
the display would be completely broken: the items below that items would
not be visible any more except for a fraction of a second when expanding
or collapsing it again.
The problem is in the fact that when starting an animation the QTreeView
stores the state before animating. And it does that even if an animation
is already running. So the stateBeforeAnimation becomes AnimatingState and
when the animation finishes, AnimatingState is the state that is restored
breaking the painting.
Unit test is included.
Change-Id: I015212c1ed8962e6df705655099a5660f195caf3
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Task-number: QTBUG-26540
Change-Id: I1c365aeb013f5ddedd0589aa4c4844be759a3882
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
They used to always return indexes in column 0.
Change-Id: I2cf4239e0a975b37548de00a1deb916fcd88b4c7
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Task-number: QTBUG-21804
Change-Id: I475166f3f60b1278089baa255ace4e18baeb568e
Reviewed-by: Jani Honkonen <jani.honkonen@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The listitem width was calculated incorrectly because spacing was
not considered. This fixes the second part of the reported bug where
spacing is set. Added some tests to catch the issue relating to the
reported bug.
Also added a test to check spacing in general.
Task-number: QTBUG-21804
Change-Id: Icc6326bce914264d882a60a9fc0ebe7d2a08dbf6
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
If the selected item is scrolled with keyboard keys the selected item
will go outside the visible area. The scrolling did not take hidden
items into account when calculating the amount to be scrolled.
Task-number: QTBUG-21804
Change-Id: I63da0248cec43be464898f9dc8167e739f00ccd0
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This is necessary whenever QPersistentModelIndexes are changed. Omitting
it means that views are not able to react to the change, such as QTreeView
clearing its (manually held) QModelIndex cache, and the QItemSelectionModel
clearing the item from its storage.
It is necessary to change a QSortFilterProxyModel test which assumed setItem
does not have any such effect. That test is ported to setData instead.
Task-number: QTBUG-18539
Change-Id: Id7a602f18b9773ba4d11019418de886860d26d3e
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Task-number: QTBUG-26687
Change-Id: Iaa0197efe64c61505e22e4a63a1f5c012af0bc78
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Task-number: QTBUG-26793
Change-Id: Ic19cb6581cd5838d26713998e152772a5d12da4f
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This is consistent with QAbstractButton, QCalendarWidget,
QDialogButtonBox and QGroupBox (ie, all other widgets with
a clicked signal)
Task-number: QTBUG-26105
Change-Id: Ieafe988b5c03216796b69a7cd70ac1a03fc12b0a
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Qt 5.0 beta requires changing the default to the 5.0 API, disabling
the deprecated code. However, tests should test (and often do) the
compatibility API too, so turn it back on.
Task-number: QTBUG-25053
Change-Id: I8129c3ef3cb58541c95a32d083850d9e7f768927
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The test has a member QWidget *topLevel which it recreates
and shows in init() without waiting for it to be exposed
although it is not used in every test case. This apparently
interferes with some tests that create separate top levels.
Do not show in init(), delete the topLevel.
Add wait to the cases where the topLevel is shown.
Change-Id: Ib428020b36dc82991d41e68478fd583bdfb004c7
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
Remove usages from autotests with the exception of
widgets/kernel, widgets/widgets and widgets/graphicsview.
Change-Id: I917b2857ed0cd07a6b3dbcd69244f558086c6586
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Using qRegisterMetaType<T>() has the advantage that multiple calls
during a program run are much more efficient, since an inlined
atomic is used to store the result. It also ensures that
Q_DECLARE_METATYPE(T) has been used, whereas qRegisterMetaType<T>("T")
will happily register anything.
Had to add Q_DECLARE_METATYPE to QFileInfo, for
QList<QPair<QString,QFileInfo>> of QFileSystemModel to work with
the partial specialisations of Q_DECLARE_METATYPE for QList, QPair.
In order to synchronize this change with other modules that did
their own Q_DECLARE_METATYPE(QFileInfo), a sync macro is defined
that can be tested in other modules, and will later be removed again.
Change-Id: I3004664e07e64cd885d5a03a57ff4e4379804aec
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
- Implement waitForWindowExposed() for toplevel windows.
- Implement waitForWindowShown(QWidget *) and mark as
deprecated in line with waitForWindowShown(QWindow*).
- Use in tests.
- Simplify tests (collapse waitForExposed, setActive
into setActiveWindow, waitForActive), remove most
hard-coded timeouts.
- Stabilize graphicsview tests by using waitForWindowActive.
Change-Id: Ic7c061e2745b36f71a715ee4e47c0346b11a91e8
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Change-Id: I19d3b2e9a5180b13deb828b55195404ef20be295
Reviewed-by: Daniel Teske <daniel.teske@nokia.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
This is a bigger test after this change:
c3e1abad4e
Beside the test of behavior it has the class
FastEditItemView which could be useful in the future.
QTestEventLoop::instance().enterLoop(1) does not perform well.
(IE it makes CI slower). My class could be used to extensions.
(or maybe even to remove a few of these calls)
Change-Id: I4f1460873cd07ddc482d5cfe462b59c47ebb189f
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This test is nice to have regardless though the main reason for it
is a refactor of hiddenSections in QHeaderView.
Change-Id: Id41a1d5edda2ef75bf432a78cdb3e952303eae92
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
In 96f1fe8855 we agreed that sections
with negative sizes did not make sense. Of the same reason default
section sizes and minimum section sizes should be not negative.
Change-Id: I6a770e7f510d8e2bb90bfd8f38b4fa0566fc137b
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The dependencies on QFont, QBrush, QIcon are all in QtGui, so there's
little sense to still have these classes in QtWidgets.
This also copies and pastes a version of QWidgetItemData as
QStandardItemData inside qstandarditemmodel_p.h.
Change-Id: Ibafc5a30748e7ce0b54753309ae6dc4a797fc20e
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Defined missing SPI_GETPLATFORMTYPE macro as it was done in for example
in qwidget and qaccesiblity test cases.
Change-Id: I33a1e0119848911fbc4830299fcc1854f5259e86
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
This is a cherry-pick of b0601630dd0ddabfaa3b97d042ee02b981d95988
from February
QListView does not consider hidden rows when scrolling to an item.
If there are hidden rows (or columns) before the selected item then
the visual index of an item is not the same as the row index
from the model. So scrolling will be off by the number of hidden
rows before the selected item.
Added a autotest for this also.
Task-number: QTBUG-21115
Change-Id: I01b097bce7f163cdb480a71b763c060cc006fdc7
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This is a cherry-pick of 4f388c383e39b598d997e21bd9a4f16d89bd0625
from February
Recursive call is caused if user code calls QtreeWidgetItem()::sortChildren and
sorting is enbled in QTreeWidget.
First call is from user code and second is caused by timer.
When timer expires second call is made.
This recursion is prevented with QTreeModel::SkipSorting skipSorting()
in QTreeWidgetItem::sortChildren();
Task-number: QTBUG-20345
Change-Id: Ibf73e69274423f31397a9e391bfba7d5c4103a3c
Reviewed-by: Markku Tapio Heikkilä <markku.heikkila@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
tst_qlistwidget::fastScroll fails if the mouse cursor happens to be
over the tested widget, because that causes an item to highlight,
resulting in unexpected region of widget to be painted. Fixed by
forcing the mouse cursor off the widget before the test.
Task-number: QTBUG-24299
Change-Id: I8f45541feda44681179d43eda67d970d5fea4e40
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
In QTreeViewPrivate::adjustViewOptionsForIndex() wrong index had been
used when referencing to array of viewItems. Variable row is set to the
index of the QModelIndex, however it is not as same as the index in
viewItems[] when there was hidden item in treeWidget. Index of viewItems[]
should be used here. Unit test is added as well.
Change-Id: Idc7eda979e7d09c5a07bd6dffd92b7abbac10e67
Task-Id: QTBUG-25333
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
These tests have passed a parallel stress test on all three of Linux,
Mac, Windows. Mark them with CONFIG+=parallel_test to allow CI to run
them in parallel, saving time.
Change-Id: I19fd333c3c645a67374ca998f6c8530dd236b0f8
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
Similar to XCB.
Task-number: QTBUG-24299
Task-number: QTBUG-24296 (partially fixed)
Change-Id: I4c9d813d9645f957f2caad0c4e395ce0d3d222cc
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
MinGW installations on case-sensitive filesystems expect
lowercase names of include-libraries and (usually) include
files.
When crosscompiling on Debian 6 (targeting MS Windows) linking
fails because mingw is looking for non-existent include-libraries.
Using lowercase names solves this.
Change-Id: Id3454f4ed8ba42b6ea93d65d9c0ce567db6712df
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The main reasons for doing this are:
1. _qpa.h end up in the master QtGui include file. QtGui is meant for
userland applications. qpa code is neither binary nor source compatible.
Inadvertant use of QPA api makes the user code binary-incompatible.
2. syncqt creates forwarding headers for non-private header files. This
gives people the impression that this is public API.
As discussed on the mailing list, even though QPA api is internal and subject
to change, it needs to treated differently from private headers since they
will be used by in-qtbase and out-of-qtbase plugins.
This commit does the following:
1. The _qpa in QPA header files is dropped.
2. syncqt now treats any file with qplatform prefix as a special file and
moves it to qpa/ directory. The recommended way of using QPA API in plugins
is: #include <qpa/qplatformfoo.h>. This allows the user include QPA API
from multiple modules (for example, qplatformfoo might be in QtPrintSupport)
3. The user needs to explicitly add QT += <module>-private to get access to
the qpa api.
4. Creates compat headers for the olden style qplatformfoo_qpa.h and QPlatformFoo
includes.
This commit does not change the cpp filenames. This requires a more careful
merging of existing non qpa cpp files and existing cpp files on a case by
case basis. This can be done at anytime.
The following files are not renamed as part of this changed but will be fixed
as part of a future change:
src/gui/kernel/qgenericpluginfactory_qpa.h
src/gui/kernel/qgenericplugin_qpa.h
src/gui/kernel/qwindowsysteminterface_qpa.h
files were renamed using
for x in `find . -name "qplatform*_qpa.h"`; do git mv $x "${x/_qpa.h/.h}"; done
for x in `find . -name "qplatform*_qpa_p.h"`; do git mv $x "${x/_qpa_p.h/_p.h}"; done
includes were renamed using script
for file in `find . -name "*.h" -or -name "*.cpp" -or -name "*.mm"`; do
sed -i -e 's,.*#.*include.*<\(Qt.*/\)\?\(QPlatform.*\)>,#include <qpa/\L\2.h>,g' \
-e 's,.*#.*include.*"\(Qt.*/\)\?\(QPlatform.*\)",#include <qpa/\L\2.h>,g' \
-e 's,.*#.*include.* "\(qplatform.*\)_qpa.h",#include <qpa/\L\1.h>,g' \
-e 's,.*#.*include.*"\(qplatform.*\)_qpa_p.h",#include <qpa/\L\1_p.h>,g' \
-e 's,.*#.*include.*<\(Qt.*/\|Qt.*/private/\|private/\)\?\(qplatform.*\)_qpa\(.*\)>,#include <qpa/\2\3>,g' \
-e 's,.*#.*include.*"\(Qt.*/\|Qt.*/private/\|private/\)\?\(qplatform.*\)_qpa\(.*\)",#include <qpa/\2\3>,g' \
$file
done
Change-Id: I04a350314a45746e3911f54b3b21ad03315afb67
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
The overload of this method was renamed
in b64426248d but this one was not.
Change-Id: I60a6ddf0fcf9deea31ccf51e7b0db16c66023356
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
This operation should be a no-op anyway, since at this point in time,
the fromAscii and toAscii functions simply call their fromLatin1 and
toLatin1 counterparts.
Task-number: QTBUG-21872
Change-Id: Ie8ac500f2f8ebe99b7525feaa7b39247e641a461
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Also remove some code which has been unused since it was introduced in
32182d107fa75e5619ecc91a81f50626f429ebe1
Task-number: QTBUG-25140
Change-Id: Ic7053d68d8200f845c1ae330342d27af7275e057
Reviewed-by: Tarja Sundqvist <tarja.sundqvist@digia.com>
Reviewed-by: David Faure <faure@kde.org>
This doesn't fix the bug, but confirms that it is CI flakyness.
Task-number: QTBUG-21098
Change-Id: Ic37a7574af88205371f4b2c24113d12b1386835c
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
This test used to be unstable, but has not failed for more than 400 CI
builds.
Task-number: QTBUG-23637
Change-Id: I0d92136aa9d641e447820ab19b53034f475f74da
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Toby Tomkins <toby.tomkins@nokia.com>
This is a regression introduced by commit
22b7d21186.
Task-number: QTBUG-24965
Task-number: QTBUG-25140
Change-Id: I3f3bfe23af802444b078a29ee5565dd2bd24a34d
Reviewed-by: David Faure <faure@kde.org>
This makes it easier to find insignificant tests that have no associated
bug report.
Change-Id: Ia71d59da062818d3860b0365d063e044705267fd
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Just like qMalloc/qRealloc/qFree, there is absolutely no reason to wrap these
functions just to avoid an include, except to pay for it with worse runtime
performance.
On OS X, on byte sizes from 50 up to 1000, calling memset directly is 28-15%
faster(!) than adding an additional call to qMemSet. The advantage on sizes
above that is unmeasurable.
For qMemCopy, the benefits are a little more modest: 16-7%.
Change-Id: I98aa92bb765aea0448e3f20af42a039b369af0b3
Reviewed-by: Giuseppe D'Angelo <dangelog@gmail.com>
Reviewed-by: John Brooks <john.brooks@dereferenced.net>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
In (SHA) b800d8b94a the span model
was replaced with a plain section model. The code however still has
variables and classes called someting with spans which would be
confusing for possible new readers of the code.
This patch cleans up most of it. It only renames classes,functions
and variables (and not any semantics or the public API).
Change-Id: I6ceb068c7317223f0d8e37f8032197f518d0174c
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
QComboBox does in fact have a user property
since b1b87a73012342dc1619a8e907ea9954d59ca564.
Change-Id: I24eb2ef267cec5d8a9f7348954b703fa6df04fa5
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Reviewed-by: David Faure <faure@kde.org>
