The page size test can get confused when two printer papers have the
same size, but the code being tested is actaully correct. Put a temp
QEXPECT_FAIL on the test and some debug statements so we can see why it
fails and fix the test as required.
Change-Id: I160ba2ed7344500d89bdcb9bb416863713fef84b
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Fix the QT_NO_PRINTER build for issues that have accumulated over last
few months, and in the new changes already approved.
Change-Id: I9aed21dee861837fd1a68a96692c873a4f5be293
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Using QPageSize internally provides the Windows ID on all platforms so
remove the conditional compile on the QPrinter api and add support to
the print engines.
Change-Id: I31e23d5090a9b6ceb087c29dead050b0ee1855a5
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Use QPageSize and QPageMargins to get/set values in the print engines,
add api to directly set the values, and rewrite the docs to make the
paper-based api obsolete instead of the page-based api.
Add new PPK keys to pass QPageSize, QPageMargins and QPageLayout to the
print engines to ensure no level of detail is lost, e.g. for custom
sizes passed to QPrinter.
[ChangeLog][QtPrintSupport][QPrinter] QPrinter can now use QPageSize
and QPageLayout in the public api to control the page layout for a
print job.
Change-Id: Iee39a4042bcd6141d29b0a82b49066d7a7a78120
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Change the Windows QPrintEngine implementation to use the
QPlatformPrintDevice to obtain device information, and use QPageSize to
obtain page size conversions. A following change will use QPageLayout
to store that page size.
Change-Id: I990943e2b62ab6dab2c4d4a292c7ed7261beadf2
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Add support to QPdfWriter for QPageSize, QPageLayout, and resolution.
[ChangeLog][QtGui][QPdfWriter] The QPdfWriter now supports setting
the PDF orientation, layout and resolution by using QPageSize and
QPageLayout.
Change-Id: I9c269f997ec540dac1989f355c6a2e7488947966
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Change the QPrinterInfo implementation to use QPlatformPrintDevice as
the backend. Remove all the old QPrinterInfo related code from the
QPA plugin. Add public api to QPrinterInfo to support some features
from QPlatformPrintDevice.
[ChangeLog][QtPrintSupport][QPrinterInfo] Added new public api for
isRemote(), state(), defaultPageSize(), supportedPageSizes(),
supportsCustomPageSizes(), minimumPhysicalPageSize(),
maximumPhysicalPageSize(), supportedResolutions(),
availablePrinterNames(), and defaultPrinterName(). The use of
availablePrinters() is discouraged due to performance concerns.
Task-number: QTBUG-35248
Change-Id: Ic38323a930549ad67bf04a1a6bb43d623dfe6a33
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Add a new QPA class to abstract Print Devices. Each platform instance
will encapsulate all required details about a print device instead of
the code being distributed throughout the print engine and print
plugin.
Change-Id: I7f6a537ad55a6e7f599d83f461b1e2ee62b15094
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
New QPageLayout to encapsulate page layout details including page size,
orientation and margins. Scale may be added later.
Subsequent changes will use this class in the paged paint devices,
paint engines, print engines, and print plugins to replace multiple
inconsistent local implementations.
[ChangeLog][QtGui] Added class QPageLayout to support handling page
layouts including the page size, orientation and margins.
Change-Id: Ife1ddd6c2a8d1516542be2eb37425111f41cd5c7
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
New QPageSize class to encapsulate paper sizes and names to ensure all
sizes and conversions are consistent and match the Postscript standard
sizes.
Subsequent changes will use this class in the paged paint devices,
paint engines, print engines, and print plugins to replace multiple
inconsistent local implementations.
[ChangeLog][QtGui][QPageSize] Added new QPageSize class to implement
Adobe Postscript PPD standard page sizes. This class supports the
standard page sizes, names and keys from the PPD standard, and provides
convenient size and rect conversion methods.
Change-Id: Ie2c8be0c3df0d29ac5da4cd9877ad41d0982633c
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Add more page metrics tests to expose the many bugs and inconsistencies
in the page layout handling. No platform or pdf backend passes all
these tests so they are skipped for now, but following commits will use
the tests to ensure the re-write of the page layout handling fixes the
many problems in a consistent way for all backends.
Change-Id: Ic5b16aa08dfe2bd9a9191662fd2bbe6b913e15c9
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
The macro should stringify value of the given token not the token
itself.
Task-number: QTBUG-37547
Change-Id: I90f4fa613bd13d5a581828ab13f620b40dfd3593
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
These internal and obsolete hooks are no longer used. The correct way
to provide platform dialogs in Qt 5.x is to implement a platform theme
plugin, as was done for GTK+ 2.x.
Change-Id: I3f1474fbf760130106b3c47173eaedd2f1a919bf
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Reviewed-by: David Faure <david.faure@kdab.com>
This simplifies the compiler control semantics by always using the
packaged compiler if it is available. With no packaged compiler, the
service is assumed to be running if the directory structure is present.
Use of a packaged library can be overridden by setting the environment
variable QT_D3DCOMPILER_DISABLE_DLL to 1.
When the runtime compiler is used, the source will no longer be
logged, and the compilation output will no longer be cached.
Change-Id: Ib07f517e7043d7785bdfa9da55abd34df518eeed
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
testcase.prf cannot be loaded from pro file for various reasons,
see qtbase commit history for details.
Moved runtime testdata logic from pro file to testdata.prf, and
thus made is reusable in other test cases as well.
Change-Id: I500d08dc4951e4eda862071e4ddd3e0f6de8c3d2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Seen on Windows:
XPASS : tst_QGraphicsAnchorLayout::stability() QCOMPARE(sameAsPreviousArrangement, true) returned TRUE unexpectedly.
tst_qgraphicsanchorlayout.cpp(1399) : failure location
Move check into loop with descriptive message on fail, do not error
out if it actually passes. This now typically prints:
XFAIL : tst_QGraphicsAnchorLayout::stability() The layout has several solutions, but which solution it picks is not stable ( QRectF(30,0 0x10) != QRectF(30,0 10x10) , iteration 3 , item 4 )
Change-Id: Iae8553dbbcedeb70d5d672e3cefbd1f06a63d27d
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
The tasks might not have run yet at the time of the QCOMPARE, so we need
to acquire on the semaphore in order to ensure that this is the case,
just like in the previous testcase.
Change-Id: I1da72bb07c2f53760b3bf912fc26aaf10ed18d48
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
NormalizationTest.txt does not exist in the project root, but under 'data'
directory. TESTDATA is converted to INSTALLS rules in testcase.prf.
INSTALLS rules generated in testcase.prf does not set 'no_check_exist'
CONFIG variable. Thus qmake will not install NormalizationTest.txt since
it cannot find it from defined location.
Even TESTDATA has been incorrectly defined, NormalizationTest.txt
has been found in majority of the platforms thanks to QFINDTESTDATA
flexibility. However it causes problems on sand-boxed platforms such
as WinRT.
Fixed by defining the relative path to NormalizationTest.txt in TESTDATA
so that qmake can find the file when processing INSTALLS variable.
Change-Id: Id9a28db2a00b17d2c0136e6ff32f421b21137898
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
Reviewed-by: Liang Qi <liang.qi@digia.com>
Correct the tense of send vs sent in comments and documentation.
Change-Id: I1c5ce9a7b1e49b8b0e8dcfde7d732e4c69acf73a
Reviewed-by: Kurt Pattyn <pattyn.kurt@gmail.com>
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
Based on file system implementation for WinRT, the UNC paths are not
supported on WinRT, so lets disable corresponding tests as well.
Change-Id: Ib45ae618f39d5da39a822160096599b30204cf71
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
Verify that QOpenGLContext works with QWindows that
do not have an explicit size set.
Task-number: QTBUG-35342
Change-Id: I91be7beb0062c5825fc58273c701c396b6423256
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
QMessageAuthenticationCode autotest does not have data folder for
TESTDATA. It seems that pro file is copy/pasted from another one which
actually have data. Removed the unnecessary statement since it caused
problems for https://codereview.qt-project.org/77981.
Change-Id: Ide753e5692bd2f469217760173a9b60f2f646770
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
Reviewed-by: Liang Qi <liang.qi@digia.com>
That's a bug, but this test causes CI problems until it's fixed.
Task-number: QTBUG-35169
Change-Id: I27b3a61437312d2217743670fa14510d9340d8c1
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Reviewed-by: Simo Fält <simo.falt@digia.com>
Check also for rules set in an environment variable QT_LOGGING_RULES.
This makes it even more convenient to set rules e.g. for just one run of an
application, without having to create a logging configuration file. It
is also more in place with the current way we enable/disable debugging
of parts of Qt via environment variables.
Change-Id: I4d05976f2b6c12bca472552ffa22345475cd01de
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
Reviewed-by: Tomasz Olszak <olszak.tomasz@gmail.com>
Use QStringRef to speed up the parsing of the left side of logging rules.
Change-Id: Idd4d75496e3865d092f2802c45928a414c14c615
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Do not accept rules with wildcards in the middle.
Change-Id: If6fa71629c46bc4127aa8bd475643bc0e8a9f57c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The documentation says that the left side of a logging rule has the syntax
<category>[.<type>]
with optional wildcard '*' as the first or the last character (or at
both positions.
However, so far we didn't allow
qt.*.debug
But what we did allow is implicit dropping of trailing '.', e.g.
qt.* matched also 'qt'
Fix these by splitting up the '.type' in advance, and then do string
matching only on the 'real' category names.
Change-Id: Iab50ad0fc673464e870f5ab8dfb3245d829b3107
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use the QTextStream stream operator for formatting 64 bit numbers,
just like we do for other numbers, too. This ensures all numbers in
a QDebug stream e.g. respect the hex and showbase modifiers.
The original reason for formatting qin64, quint64 with QString::number
is unclear (pre-dates the original qt4 git import). Maybe QTextStream
did lack proper support for 64 bit numbers back then.
Task-number: QTBUG-36841
Change-Id: I049516c2a8394c9c1a708f86c3d950418a20a957
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
D-Bus libraries were recently added to OS X 10.7 making these
tests to be executed for first time.
Task-number: QTBUG-37469
Change-Id: Ia7a74a45b18d4a645307f7fb7666236c5e009e5f
Reviewed-by: Simo Fält <simo.falt@digia.com>
Do not close connection in slot bytesWritten() since that can
cause clients to fail with "Connection Closed". Instead, use
deleteLater() to close properly and prevent leaking the sockets.
FAIL! : tst_QNetworkReply::qtbug28035browserDoesNotLoadQtProjectOrgCorrectly() 'waitForFinish(reply) == Success' returned FALSE. ( QUrl( "http://localhost:58240" ) failed: # 2 "Connection closed" )
..\tst_qnetworkreply.cpp(7067) : failure location
Task-number: QTBUG-37449
Change-Id: Ib92cb62fae523370b2fb45e1ccfa217559732bc8
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Replacing old troll.no domain with qt-project.org domain. Using troll.no
doesn't work anymore.
Change-Id: Ic6fa71b044d1adbdc66c875b47bfdc256a2afc8e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The test takes too long and fails:
FAIL! : tst_QFtp::abort(WithoutProxy:get_fluke01) '(int)newData_ba.size() == bytesDone' returned FALSE. ()
tst_qftp.cpp(1886) : failure location
FAIL! : tst_QFtp::abort(WithoutProxy:get_fluke01) Network operation timed out
tst_qftp.cpp(1392) : failure location
FAIL! : tst_QFtp::abort(WithoutProxy:put_fluke01) 'bytesDone != bytesTotal' returned FALSE. ()
tst_qftp.cpp(1406) : failure location
FAIL! : tst_QFtp::abort(WithSocks5Proxy:get_fluke01) '(int)newData_ba.size() == bytesDone' returned FALSE. ()
tst_qftp.cpp(1886) : failure location
FAIL! : tst_QFtp::abort(WithSocks5Proxy:get_fluke01) Network operation timed out
tst_qftp.cpp(1392) : failure location
FAIL! : tst_QFtp::abort(WithoutProxyWithSession:get_fluke01) '(int)newData_ba.size() == bytesDone' returned FALSE. ()
tst_qftp.cpp(1886) : failure location
FAIL! : tst_QFtp::abort(WithoutProxyWithSession:get_fluke01) Network operation timed out
tst_qftp.cpp(1392) : failure location
FAIL! : tst_QFtp::abort(WithoutProxyWithSession:put_fluke01) 'bytesDone != bytesTotal' returned FALSE. ()
tst_qftp.cpp(1406) : failure location
FAIL! : tst_QFtp::abort(WithSocks5ProxyAndSession:get_fluke01) '(int)newData_ba.size() == bytesDone' returned FALSE. ()
tst_qftp.cpp(1886) : failure location
FAIL! : tst_QFtp::abort(WithSocks5ProxyAndSession:get_fluke01) Network operation timed out
tst_qftp.cpp(1392) : failure location
Totals: 327 passed, 10 failed, 4 skipped
QtQA::App::TestRunner: warning: test duration (398 seconds) is dangerously close to maximum permitted time (450 seconds)
QtQA::App::TestRunner: warning: Either modify the test to reduce its runtime, or use a higher timeout.
QtQA::App::TestRunner: test failed, running again to see if it is flaky...
Change-Id: I122641f174927c6b3668df05c79f88e38b88042f
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Try to fix frequently failing test:
FAIL! : tst_NetworkSelfTest::ftpProxyServer() Failed to receive data in step 32: timeout
tst_networkselftest.cpp(230) : failure location
on Windows. Introduce timeout constant, add message.
Change-Id: I709f0b34cd1cfe5d3c64cf61ccb7907bd616bc54
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
This reverts commits f12b0f9a38
("QByteArrayList: optimize op+"),
f96f2fe367 ("Enable QByteArrayList
tests"), and 4f23f0530a ("new
QByteArrayList class").
This class is coming back in Qt 5.4.
[ChangeLog][CHANGELOG FIX] Remove the line about QByteArrayList being
added.
Change-Id: I890ab2b34a9b3e575512eb306d0f241143a867cf
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
This patch adds the Objective-C NSData/CDataRef converters to
QByteArray
This will replace the current converters offered in QMacExtras
[ChangeLog][QtCore][Objective-C] Added NSData/CDataRef converters for
QByteArray
Change-Id: I7a0f14bee4271798db345f3c5efd26ac671a3ea4
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- Replace SRCDIR define by QFINDTESTDATA
- Replace QVERIFY by QCOMPARE where applicable
- Introduce QVERIFY2 with message for comparisons
Change-Id: Ib5a6b0f09428587281e1b9521e4d8a8117c1afdb
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
The test instantiates enormous amounts of templates in one compilation
unit. All clang versions, that I tested, suffers from performance issues
while compiling the test, the cost depends on the version. The most
affected are shipped by Apple.
Task-number: QTBUG-37237
Change-Id: I0959c1a4a6faee448ae1dae5c1e70ee06cefbd9c
Reviewed-by: Simo Fält <simo.falt@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
We do not need to check all possible basic type combinations in
the autoregistration test.
Change-Id: Ibfb97a93d9d1862e669d843988976690bbc83c74
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Redundant and unused variadic macro arguments were removed. For macros
with known count of arguments, named arguments are preferred.
Common code was moved out from macros so it is not generated over and
over.
Change-Id: Ib5106555d0d3c6cadfbdbdbd614831240b6d762f
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
QFATAL : tst_QGLThreads::textureUploadInThread() Cannot make QOpenGLContext current in a different thread
QFATAL : tst_QGLThreads::painterOnPboInThread() Cannot make QOpenGLContext current in a different thread
Task-number: QTBUG-28264
Change-Id: I281cf0593e01b43456410a9a53746bbb15f34f24
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
Change-Id: I1711f99f9e46f1d195684e3c3a714b00618dca2e
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
- QVariant can store (U)Int, (U)LongLong, Float and Double numbers.
Previously, QJsonValue::fromVariant() converted Floats into Strings
while converting the others to Doubles.
- Add unit tests for QJsonValue::fromVariant()
[ChangeLog][QtCore][JSON] QJsonValue::fromVariant() will now convert
single-precision Floats into Doubles instead of Strings
Change-Id: I457adbe29c37ada611d1c6d711c42866d63d4024
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
And takes a very long time to build if it doesn't run out of memory.
Task-number: QTBUG-37237
Change-Id: I8c7fae4d2d99ad59c6d6306da2df554a05955446
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
In the original change - cfb44c6528 - when
querying for the path of a file that did not contain a slash after the
drive indicator it would get the current path and return that as the path
that the file resided on.
However this meant that it would take the current path at that time which
may not be the actual path that was expected. So it was decided that
it should revert back to the original behavior which was to just return
the drive letter followed by the colon which would thus indicate still
that it represented whatever the current path was on that drive.
Change-Id: Ic57ae9227882a66e9a4c4d6537d7f2cae829165a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Remove the opengl proxy for now. Later it will either be moved into
a separate library or replaced by a QOpenGLFunctions-based approach.
This means that the -opengl dynamic configuration is not usable
for the time being. The rest of the enablers remain in place.
The convenience function QOpenGLFunctions::isES() is now moved to
QOpenGLContext and is changed to check the renderable type. This is
extremely useful since besides supporting dynamic GL it solves also
the problem of GL_ARB_ES2_compatibility (i.e. it triggers the real ES
path when creating an ES-compatible context with a desktop OpenGL
implementation).
Task-number: QTBUG-36483
Task-number: QTBUG-37172
Change-Id: I045be3fc16e9043e1528cf48e6bf0903da4fa7ca
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
When a child of a widget is spontaneously revealed due to a call to
the parent 'resize' method, the child will not receive a paint event
if it has the WA_StaticContents and WA_OpaquePaintEvent flags set.
This is caused by the backing store being pre-emptively resized by the
call to setGeometry_sys, which causes QWidgetBackingStore::sync to skip
the block which handles the static contents.
There doesn't appear to be any reason to preemptively resize the backing
store, since it is always resized as-needed during the the 'sync' method.
This change-set removes the code which preemptively resizes the backing
store.
Task-number: QTBUG-35282
Change-Id: Ie9942854ca5322dfe0f98ed8100810161576be80
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
MSVC 2008 is confused by TypeInStruct being a template, resulting in
\tst_qatomicinteger.cpp(189) : error C2027: use of undefined type 'QStaticAssertFailure<Test>'
with
[
Test=false
]
for int (and thus for all unsupported types). This appears to be a real
Heisenbug-nature compiler bug as it can also be fixed by adding
qDebug() << Q_ALIGNOF(TypeInStruct<T>)
before the static assert.
Task-number: QTBUG-37195
Change-Id: Ib2b60f3c1ffeb0b8bdeb1fb0c659655ce4ab10d8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This causes frequent compiler errors on Windows CE.
tests\auto\corelib\global\qtendian\tst_qtendian.cpp(140) : fatal error C1001: An internal error has occurred in the compiler.
(compiler file 'd:\orcas\compiler\utc\src\P2\main.c[0xCCCCCCCC:0xCCCCCCCC]', line 243)
Task-number: QTBUG-37194
Change-Id: I2adbc1e3b1896fbe86780aa26a15e918333a09f2
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
by default QT contains both core and gui already
Change-Id: I6f5b551104e40a024468e7cb62e302134e9472ec
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
These tests seem to fail because denormalized numbers are not
supported on QNX yet, so marking them as expected failures.
- floatDistance(denormal)
- floatDistance_double(denormal)
Task-number: QTBUG-37094
Change-Id: I79dbc78da6e9bef8466264fd2cab4af0ee8b868f
Reviewed-by: Fabian Bumberger <fbumberger@rim.com>
These tests seem to fail because denormalized numbers are not
supported on QNX yet, so marking them as expected failures.
- testNumbers_2()
- toJsonLargeNumericValues()
- parseNumbers()
Task-number: QTBUG-37066
Change-Id: Ifec95b936fb70253395dee4d1ca18e85870486a3
Reviewed-by: Fabian Bumberger <fbumberger@rim.com>
The pseudoclass array is declared with length "NumPseudos - 1",
but the declaration has actually 44 elements, not 45.
This caused a zero-initialized last element to be silently appended
to the array. The zero-initialized element broke the sorting
of the array, which in turn broke std::lower_bound usage
(although of course the problem was there from before switching
to the standard library algorithms).
Task-number: QTBUG-36933
Change-Id: I8a02891fc36761b6ae72d15a0a8d6c6a96813947
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
drawCachedGlyphs draws with the wrong color on RGBA8888. The issue
is that the draw routines bitmapblit_quint32 and alphamapblit_quint32
while safe to use on rgba formats, needs to have the input color
converted.
This patch adds small wrapper functions for bitmapblit and alphamapblit
that converts the formats. Two tests are extended to ensure we have
test coverage.
Change-Id: I5f99f3795eba46a69d4df5b167e6099024e9a060
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
This is more consistent with e.g. qt.conf, where section names also
start with an upper case character.
Change-Id: I9ddaf72baeb9334d081807412512242d5d46cbbf
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This reverts commit a4ff400e25.
The patch caused a regression for bold fonts which is currently
blocking the alpha of Qt 5.3, so lets revert it and try
resubmitting a fixed version later to avoid delaying any release.
Task-number: QTBUG-36929
Change-Id: I8d474b09b2270eb2f861853e60605429be08e2d9
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
There is no need to even try to run the tests if the network test
server is not present.
Add a validation in initTestCase() since all test functions depend
on the network test server.
Change-Id: I8eca376a718ab5b6e1cc2c57f2e045dd0b58f52b
Reviewed-by: Richard J. Moore <rich@kde.org>
Unit-test this by making the QList, QVector, QHash and QMap unit tests
be duplicated under strict-iterator mode. There's no test for
QLinkedList.
The tst_Collections test does not compile under strict-iterator
mode. It generated over 15000 errors when I tried.
The strict iterators required a small change: the difference_type
typedef needs to match the operators that get distances
(operator-(iterator)) and move the iterator around (+, -, +=, -=, etc.).
Task-number: QTBUG-29608
Change-Id: I834873934c51d0f139a994cd395818da4ec997e2
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: Jason McDonald <macadder1@gmail.com>
Add a new QMarginsF class to complement QMargins in the style of
QSize/QSizeF and QRect/QRectF.
[ChangeLog][QtCore] Added class QMarginsF to support handling margins
with floating-point values.
Change-Id: Iaaa95ec85f5d126d9d864fc4b607241a8c8a8f3a
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
On Windows, trailing spaces in a filename are silently ignored, so we
need to strip it before trying to open a file with it. Otherwise it ends
up being stripped later and in a case like " ." it will end up causing
Qt to think that a folder exists when it does not.
[ChangeLog][Platform Specific Changes][Windows][QtWidgets][QFileDialog]
Handled the case of having trailing spaces in a filename correctly so if
the filename ends up being empty that the parent path is used instead.
Change-Id: I6500cc3a44746bf4a65e73bcfb63265a0a97c8a3
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
So far we did bind the definition of Q_COMPILER_VARIADIC_MACROS to
C++11 (so gcc, clang will not define it in default gnu++98 standard).
However, variadic macros are a feature of the gcc preprocessor since
version 2.97, and are enabled in the default configurations on gcc, clang,
icc.
This might cause warnings and errors though if one enables additional
warnings in gcc, clang (e.g. by -pedantic). Anyhow, as a precedent
qglobal.h already relies on 'long long' ... The warning can be disabled
by adding '-Wno-variadic-macros'.
[ChangeLog][Compiler Specific Changes] Variadic macros are now enabled
more liberally for gcc, clang, icc. If you have warnings (because you e.g.
compile with -pedantic), disable them by -Wno-variadic-macros.
Change-Id: Ie979b85809508ad70cab75e6981f20496429f463
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Commit f4dd534 introduced a regression, so that QFontMetrics reported
a wrong size (to be more specific width) for FreeType fonts.
The calculation of glyph advances has to to reflect (rounded)
integral number of pixels. This was only done when the glyph was cached.
So in some cases the first call to QFontMetrics::size gave a different
result than the second.
This patch reverts f4dd5344fb.
The tst_QFontMetrics::same auto test only happened to work on some
platforms, on BlackBerry for instance it did not. Extended the test
case to make sure it works for different font sizes.
Change-Id: Ia5bb9abd3ff98193c9bba048b85207672ed8d9c3
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Currently the only supported SPDY version is 3.0.
The feature needs to be enabled explicitly via
QNetworkRequest::SpdyAllowedAttribute. Whether SPDY actually was used
can be determined via QNetworkRequest::SpdyWasUsedAttribute from a
QNetworkReply once it has been started (i.e. after the encrypted()
signal has been received). Whether SPDY can be used will be
determined during the SSL handshake through the TLS NPN extension
(see separate commit).
The following things from SPDY have not been enabled currently:
* server push is not implemented, it has never been seen in the wild;
in that case we just reject a stream pushed by the server, which is
legit.
* settings are not persisted across SPDY sessions. In practice this
means that the server sends a small message upon session start
telling us e.g. the number of concurrent connections.
* SSL client certificates are not supported.
Task-number: QTBUG-18714
[ChangeLog][QtNetwork] Added support for the SPDY protocol (version
3.0).
Change-Id: I81bbe0495c24ed84e9cf8af3a9dbd63ca1e93d0d
Reviewed-by: Richard J. Moore <rich@kde.org>
This partially reverts 5764f5e6ea and
fixes the problem differently.
After this commit, "file:///foo" is still equal to "file:/foo", but
"foo:///foo" becomes different from "foo:/foo", as it should be.
Task-number: QTBUG-36151
Change-Id: Ia38638b0f30a7dcf110aa89aa427254c007fc107
Reviewed-by: David Faure <david.faure@kdab.com>
This also has the advantage of not requiring the use of the locale
codec. Quite an advantage if you're debugging the locale codec. But it's
mostly so that we don't get question marks that hide the difference we
were trying to locate.
[ChangeLog][QtTest] QtTest now prints an escaped version of QStrings
that failed to compare with QCOMPARE. That is, instead of converting
non-printable characters to question marks, QtTest will print the
Unicode representation of the character in question.
Change-Id: I44c1ef3246b188c913dacd3ca4df02581356ea41
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
This is extremely useful, since the most common action after a failed
compare-and-swap is to loop around, trying again with the current
value as found in memory.
Code currently written as:
do {
Type value = atomic.load();
...
} while (!atomic.testAndSetRelaxed(value, desired));
Becomes:
Type value = atomic.load();
do {
...
} while (!atomic.testAndSetRelaxed(value, desired, value));
In most CPU architectures, the value that was found in memory is known
to the compare-and-swap code, so this is more efficient than the
previous code. In architectures where the value is not known, the new
code is no worse than before.
The implementation sometimes modified an existing function, sometimes
it added a new one, depending on whether more registers were needed in
the assembly (like ARMv6-7), the code became more complex (ARMv5), the
optimizer failed (C++11), or it was just plain equivalent (MIPS).
Change-Id: I7d6d200ea9746ec8978a0c1e1969dbc3580b9285
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This implementation is based on GCC's implementation of std::hash<FP>, but only
to the extent of checking for zero before hashing the bits. The bit hasher is
the Qt one; I didn't even look what GCC uses.
The check against 0.0 is mandated by the requirement to have
\forall x,y: x == y => qHash(x) == qHash(y)
which would be violated for x = 0.0 and y = -0.0 if we only hashed the bits.
Implemented out-of-line to avoid potential FP-comparison warnings, as well
as to be able to use the file-static hash() functions, which gets inlined
unlike qHashBits(), which cannot be.
[ChangeLog][QtCore][QHash/QSet] Allowed to use float, double and long double
as QHash/QSet keys.
Change-Id: I38cec4afb860f17e9f8be7b67544e58b330f8fff
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
This test can assume that the QObject::signalsBlocked property works as
advertized, so just check signalsBlocked() in repsonse to QSignalBlocker
manipulations.
Change-Id: I99e4ef9c4ed05c3840233d92a587636d2d78f59a
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Change 85e57653 caused a compile error for code that does
Q_DECLARE_LOGGING_CATEGORY(cat);
//..
qCDebug(cat()) << // ...
error: C3848: expression having type 'const QLoggingCategory' would lose
some const-volatile qualifiers in order to call 'QLoggingCategory
&QLoggingCategory::operator ()(void)'
This is a regression from Qt 5.2. Fix the error by adding a const version
of operator()().
Change-Id: I2fb04f2e155962adee0f98089fc5a159000bef56
Reviewed-by: Alex Blasche <alexander.blasche@digia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Added basic functionality to socket for WinRT. Even though not
all auto tests pass yet, this patch can be seen as a foundation
for upcoming work in this area. Reading from and writing to TCP
socket works and one can listen for tcp connections.
Change-Id: Id4c25ba1c7187ed92b6368c785c4f62837faded7
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
moc would skip the 'operator' keyword as unknown and try to parse a type again
but as it sees the '<' it looks for the corresponding '>' which does not exist
types can't start with '<' anyway, so return an invalid type and continue
parsing as usual
Task-number: QTBUG-36834
Change-Id: If3d27076ef9947abf8c57c594713eece9334d0b0
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
The patch introduces a new build configuration on Windows which
can be requested by passing -opengl dynamic to configure.
Platforms other than Windows (including WinRT) are not affected.
The existing Angle and desktop configurations are not affected.
These continue to function as before and Angle remains the default.
In the future, when all modules have added support for the dynamic
path, as described below, the default configuration could be changed
to be the dynamic one. This would allow providing a single set of
binaries in the official builds instead of the current two.
When requesting dynamic GL, Angle is built but QT_OPENGL_ES[_2] are
never defined. Instead, the code path that has traditionally been
desktop GL only becomes the dynamic path that has to do runtime
checks. Qt modules and applications are not linked to opengl32.dll or
libegl/glesv2.dll in this case. Instead, QtGui exports all necessary
egl/egl/gl functions which will, under the hood, forward all requests
to a dynamically loaded EGL/WGL/GL implementation.
Porting guide (better said, changes needed to prepare your code to
work with dynamic GL builds when the fallback to Angle is utilized):
1. In !QT_OPENGL_ES[_2] code branches use QOpenGLFunctions::isES() to
differentiate between desktop and ES where needed. Keep in mind that
it is the desktop GL header (plus qopenglext.h) that is included,
not the GLES one.
QtGui's proxy will handle some differences, for example calling
glClearDepth will route to glClearDepthf when needed. The built-in
eglGetProcAddress is able to retrieve pointers for standard GLES2
functions too so code resolving OpenGL 2 functions will function
in any case.
2. QT_CONFIG will contain "opengl" and "dynamicgl" in dynamic builds,
but never "angle" or "opengles2".
3. The preprocessor define QT_OPENGL_DYNAMIC is also available in
dynamic builds. The usage of this is strongly discouraged and should
not be needed anywhere except for QtGui and the platform plugin.
4. Code in need of the library handle can use
QOpenGLFunctions::platformGLHandle().
The decision on which library to load is currently based on a simple
test that creates a dummy window/context and tries to resolve an
OpenGL 2 function. If this fails, it goes for Angle. This seems to work
well on Win7 PCs for example that do not have proper graphics drivers
providing OpenGL installed but are D3D9 capable using the default drivers.
Setting QT_OPENGL to desktop or angle skips the test and forces
usage of the given GL. There are also two new application attributes
that could be used for the same purpose.
If Angle is requested but the libraries are not present, desktop is
tried. If desktop is requested, or if angle is requested but nothing
works, the EGL/WGL functions will still be callable but will return 0.
This conveniently means that eglInitialize() and such will report a failure.
Debug messages can be enabled by setting QT_OPENGLPROXY_DEBUG. This will
tell which implementation is chosen.
The textures example application is ported to OpenGL 2, the GL 1
code path is removed.
[ChangeLog][QtGui] Qt builds on Windows can now be configured for
dynamic loading of the OpenGL implementation. This can be requested
by passing -opengl dynamic to configure. In this mode no modules will
link to opengl32.dll or Angle's libegl/libglesv2. Instead, QtGui will
dynamically choose between desktop and Angle during the first GL/EGL/WGL
call. This allows deploying applications with a single set of Qt libraries
with the ability of transparently falling back to Angle in case the
opengl32.dll is not suitable, due to missing graphics drivers for example.
Task-number: QTBUG-36483
Change-Id: I716fdebbf60b355b7d9ef57d1e069eef366b4ab9
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
Conversion from UTC to local time will result in same datetime value,
if local time is in UTC.
Change-Id: Icd4ea57cb46cc97bcc8fce4f4e579bf64a4d4b10
Reviewed-by: Mitch Curtis <mitch.curtis@digia.com>
At first, my goal was just to fix Moc::until() to parse properly
template arguments containing expressions containing > or >>
such as Foo<(8>>2)>
But with the test, I realized that normalizeType also requires change
not to split the > > too much.
And QMetaObjectPrivate::decodeMethodSignature should not interpret
the ) within the template parameter as the end of the function.
Change-Id: Ia9d3a2a786368aeda1edcf66280d70f64cf05070
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
It was not possible to get the actual process ID (in a cross-platform
manner) from QProcess, as the user would need to handle the returned
typedef (Q_PID) differently on Unix and Windows.
On Unix Q_PID is the actual process ID, but on Windows it's a pointer
to a PROCESS_INFORMATION structure, which among other fields contains
the process ID. Instead of returning a pointer on Windows,
QProcess::processId() will return the actual process ID on both Windows
and Unix.
[ChangeLog][QtCore][QProcess] Added processId() to QProcess. This
function will, unlike pid(), return the actual process identifier on
both Window and Unix.
Task-number: QTBUG-26136
Change-Id: I853ab721297e2dd9cda006666144179a9e25b73d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is only useful for logging benchmarks, since it won't print test
passes, failures, etc. It's useful for importing to spreadsheets to do
number-crunching.
[ChangeLog][QtTest]Added a CSV logging mode that is suitable for
importing benchmark results into spreadsheets. This can be enabled by
the -csv option on the command-line. The CSV logging mode will not print
test failures, debug messages, warnings, etc.
Change-Id: I245d6f86bb380645c9bc0d748cf474b3ed42cab8
Reviewed-by: Sergio Ahumada <sahumada@blackberry.com>
Reviewed-by: Jason McDonald <macadder1@gmail.com>
Initial submission of a new class QByteArrayList with the
purpose of aggregating and then joining QByteArray instances.
[ChangeLog][QtCore] Added new QByteArrayList class.
Change-Id: I2a9dc71ff7aadb19ebc129a0d47ac8cd33895924
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][QtGui][QWindow]QWindow::icon() now defaults to the application
icon, which can be set with QGuiApplication::setWindowIcon().
Change-Id: Id1974e5cda81775e515c14b294f67fb99351c6c9
Reviewed-by: Albert Astals Cid <albert.astals@canonical.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
-title disappeared between Qt4 and Qt5, due to all the refactorings around QPA.
Making the caption of the mainwindow configurable allows custom setups
for specific users or use cases.
[ChangeLog][QtGui][QGuiApplication] Restore support for -title command line
argument on X11, add -qwindowtitle on all platforms.
Change-Id: I73e6bf21248f3419178eba583b257172a175e74e
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Albert Astals Cid <albert.astals@canonical.com>
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Avoid dereferencing the q-pointer if the button has been
destructed meanwhile popup was open.
Task-number: QTBUG-26956
Change-Id: I68190e9fe84c669229ae0ce4d573ee7a02a8a141
Reviewed-by: Ivan Komissarov <ABBAPOH@gmail.com>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Allow configuration of logging rules from outside of the application,
either through a configuration file (.config/QtProject/qtlogging.ini),
or through a file specified by a QT_LOGGING_CONF environment
variable.
The logging rules from the different sources are concatenated: First
the rules from QtProject/qtlogging.ini are applied, then
QLoggingCategory::setLoggingRules(), finally from the environment.
This allows an application to overwrite/augment the system wide rules,
and in turn that can be tailored for a specific run by setting a
configuration in the environment variable.
[ChangeLog][QtCore][Logging] The logging framework can now be configured
with an .ini file.
Change-Id: I442efde1b7e0a2ebe135c6f6e0a4b656483fe4b1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
They cause test failures from time to time.
Change-Id: I917bef340401d25bf54e133be9d9562b3b133c9f
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: Niels Weber <niels.weber@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Passing a constructor as second argument to foreach didn't work when
building with gcc.
For MSVC this already worked as a different foreach implementation is
used.
Change-Id: Id98444c699b4cebc14ea62076c5f7cba33ffb824
Reviewed-by: hjk <hjk121@nokiamail.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
The RGBA8888 formats was incorrectly using the qt_gradient_quint32
which is argb specific. This caused vertical gradients but only
vertical gradients to be drawn incorrectly.
This changes the RGBA8888 formats formats to use the generic gradient
method and renames qt_gradient_quint32 to qt_gradient_argb32 to
indicate its limitation.
Change-Id: Ia1cd48ca7f4f78b64f31d6263e81cd8ac3b0954e
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
The debug output of all categories will be visible by default,
except from the "qt.*" categories. "qt.*" categories are private
and their default debug output will be hidden.
[ChangeLog][QtCore][Logging] Enable qCDebug's for all categories except qt one's
Change-Id: Ibe147c8bbe0835a63b3de782288b9c3251321d8f
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
The basedir xdg spec says:
"All paths set in these environment variables must be absolute.
If an implementation encounters a relative path in any of these variables it
should consider the path invalid and ignore it."
Therefore we ignore relative paths including the empty string.
Change-Id: I8f779b78981018051b16de23b2514f2e62b7ab39
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The slot object was deleted after the mutex was relocked, which caused
a deadlock in case the functor destructor locked the same mutex again.
Change-Id: I5b4fb22fdb4483f91c89915872bfd548c31b0eea
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
QScreen::grabWindow() is not always reliable because it grabs from the
framebuffer. (The window might then be covered by other windows, e.g.
"Stays on top"-Windows, popups etc).
If QScreen::grabWindow() fails we therefore fallback to
QWidget::grab(). This will not grab from the frame buffer, but it will
ask the widget to render itself (with its current state) to a pixmap
and return it.
QWidget::grab() should usually return the expected pixmap, and the
pixmap it gives is not subject to the state of the window manager.
This means that both QScreen::grabWindow() *and* QWidget::grab()
must produce an unexpected pixmap in order for the test to fail.
Change-Id: I276554155bb1e5b510d2a2d43628d91669464fe2
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Code units 0xD800 .. 0xDFFF are not UCS-4, so we can't happily return them.
Instead, if we encounter a stray surrogate, replace it with 0xFFFD, which
is what Unicode recommends anyhow.
References:
§3.9 Unicode Encoding Forms
D76: Unicode scalar value: Any Unicode code point except high-surrogate
and low surrogate code points.
As a result of this definition, the set of Unicode scalar values consists
of the ranges 0 to D7FF_16 and E000_16 to 10FFFF_16, inclusive.
[...]
UTF-32 encoding form: The Unicode encoding form that assigns each Unicode
scalar value to a single unsigned 32-bit code unit with the same numeric
value as the Unicode scalar value.
§ C.2 Encoding Forms in ISO/IEC 10646
UCS-4. UCS-4 stands for “Universal Character Set coded in 4 octets.” It is
now treated simply as a synonym for UTF-32, and is considered the canonical
form for representation of characters in 10646.
§ 3.9 Unicode Encoding Forms (Best Practices for Using U+FFFD)
and
§ 5.22 Best Practice for U+FFFD Substitution
Whenever an unconvertible offset is reached during conversion of a code
unit sequence:
1. The maximal subpart at that offset should be replaced by a single
U+FFFD.
2. The conversion should proceed at the offset immediately after the
maximal subpart.
[...]
Whenever an unconvertible offset is reached during conversion of a code
unit sequence to Unicode:
1. Find the longest code unit sequence that is the initial subsequence of
some sequence that could be converted. If there is such a sequence, replace
it with a single U+FFFD; otherwise replace a single code unit with a single
U+FFFD.
2. The conversion should proceed at the offset immediately after the
subsequence which has been replaced.
[ChangeLog][QtCore][QString] QString::toUcs4 now does not return invalid
UCS-4 code units belonging to the surrogate range (U+D800 to U+DFFF)
when the QString contains malformed UTF-16 data. Instead, U+FFFD
is returned in place of the malformed subsequence.
Change-Id: I19d7af03e749fea680fd5d9635439bc9d56558a9
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
That commit made QString::toXxx (8-bit) functions use C++11 ref
qualifiers, so we need to match it here.
Change-Id: I45b50464d36f858d012b12e0cb511aae347ddb6f
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
UCS-4 iterator over a QString.
Kept private for now so we can still work on the API.
Done-with: Thiago
Change-Id: I377f8bb1921e591ee3292c08c3e097fb6bc7f0c4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Because they make sense. I'm even thinking that the char16_t version
should get a QString implicit constructor. Maybe both encodings.
Change-Id: Ifffc61dd890795fbbbd5f7cb5efb3e6287d1270e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Showing, moving and resizing
Contrarily to what an NSWindow does to its NSViews, child NSWindows need
to be explicitly shown and hidden, and clipped if the parent NSWindow
changes geometry. Also, hiding an NSWindow will not hide its child
windows. This needed to be managed manually, adding 2 additional states
to QCocoaWindow to reflect whether a child window has been clipped out by
any ancestor geometry change, or hidden by any ancestor being hid. Also,
ordering out an NSWindow will remove it fromm its parent's child windows
array, making necessary to maintain a parallel list of child windows in
QCocoaWindow.
Stack order
Although child NSWindows can be ordered relatively to each other, they
need to be added again to be moved lower in the window stack. This also
means the windows above it need to be added on top.
Key (focus) status
One of the remaining issues, is to make sure the top level window keeps
the "key status" while still forwarding key events to the child window.
Keeping same event propagation
This use case is best illustrated with undocking QDockWidgets (if these
are child NSWindows). The main issue is to make sure the QDockArea will
get the mouse events right after undocking a dock widget. We used a similar
workaround as the "key status" problem, and manually forward the mouse
events to the dock area's QWindow.
Manual test, by Morten Johan Sørvig, included.
Task-number: QTBUG-33082
Task-number: QTBUG-22815
Change-Id: I50e34936fb82bff013e99f4bcb3bd0db0704c6ae
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Make the printer selection option api public on Windows to be
consistent with Mac, and with the print program api which is already
public.
Change-Id: I3da9684288348eaa43276ca8534a1d5809f7027b
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Add support to the Mac and Windows print engines to preserve the
creator name when switching between native and pdf format.
Change-Id: Ie036af3140f24d8e34aa886f091384f93aa0157b
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Mac supports Collate Copies using native api, so add support. Note
this is mostly only useful for setting the print dialog default, as
Mac supports server-side multiple copies so the app will never need to
collate the copies itself.
Change PDF and Windows to default to collate true to match Mac as this
is the behavior users expect.
Task-number: QTBUG-27724
Task-number: QTBUG-35251
Task-number: QTBUG-22144
Change-Id: Ia43dbc260b3a71aa5b267cca54c168ffbea794fc
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Add support to the Mac print engine for set/get the Document Name using
the Job Name setting. Our documentation states this is one use that the
document name will be put to so is appropriate to be used.
Change the Windows print engine to default to a blank Docuemnt Name
consistent with the other print engines. If still blank when printing
then use a default value.
Task-number: QTBUG-27724
Task-number: QTBUG-22144
Change-Id: If590811b5720e6f759eabc290b578b94e221f9f4
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
The PrintEngine keys are not consistently treated across the platforms
and are not properly tested. Start the process of making the print
engines behave consistently by documenting and testing the current
behavior. Ensure all unsupported features return a consistent
default value.
The auto test for valuePreservation() has been flaky depending on the
platform and installed printers so remove it and replace it with more
complete testing. If no native printers available then don't test
the native engines.
Fixes for the individual inconsistent keys will follow.
Task-number: QTBUG-26430
Change-Id: Iab914d7e0a5ae4a2cdc24c8645751f0910cf440c
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
This fixes the following case:
<blockquote>
<span />Foobar
</blockquote>
Qt would see the end of <span>, and consider the current block
tag as closed, thus resetting the block format, thus losing the
margin set for the current block (due to blockquote).
If you do
<blockquote>
<span>Foo</span>Foobar
</blockquote>
instead, then the same would not happen, since hasBlock is set
to false when we append text to the current inline node.
[ChangeLog][QTextDocument] Add support for empty inline elements
in block tags.
Task-number: QTBUG-33336
Change-Id: Ic566edfec96cb8d44d1c02932bb195bc921d1580
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
This fixes a serious regression from
7d72516b52.
[ChangeLog] QFileSelector: the identifier for OS X has been changed back
to 'osx' from 'mac', and 'mac' and 'darwin' have now been added as
selectors for Darwin OS (which is the base of both OS X and iOS).
Task-number: QTBUG-35073
Change-Id: I83183e34c5a697338cc1ddcac33a41bd379ded12
Reviewed-by: Alan Alpert <aalpert@blackberry.com>
When changing a filter so that a previously empty proxy model becomes
populated sorting was not applied correctly.
This was caused by using mapToSource for getting source_sort_column
from proxy_sort_column. For an empty proxy model this won't work because
no valid proxy index can be created in this case.
We now directly use the root index column mapping instead by doing
essentially the same as QSortFilterProxyModelPrivate::proxy_to_source
but without the sanity checks needed for external use.
The sorting feature of QSortFilterProxyModel has always assumed that
the number of columns is specified by columnCount(QModelIndex()) so
the behavior doesn't change.
[ChangeLog][QtCore][QSortFilterProxyModel] Fixed sorting when a
previously empty proxy model becomes populated because of a change in
the filter.
Task-number: QTBUG-30662
Change-Id: I21322122e127889dfadc02f838f0119ed322dcab
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
It was impossible to hide/show the close button after a QMdiSubWindow
was created.
Task-number: QTBUG-9933
Task-number: QTBUG-27274
[ChangeLog][QtWidgets][QMdiSubWindow] Fixed setWindowFlags() for QMdiSubWindow.
Change-Id: I7db9a1bef5ba8a8ace729acb85682c8b3de9c33c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Add overloads to the find() methods in QPlainTextEdit and QTextEdit
that find the next occurrence matching the passed regular expression.
These are convenience methods that eliminate the need to use the
document() method and the need to handle the QTextCursor return value.
[ChangeLog][QtWidgets][QPlainTextEdit] Added find method overload using QRegExp
[ChangeLog][QtWidgets][QTextEdit] Added find method overload using QRegExp
Change-Id: Ia6139b771e3ae4ca02e4b8ea7fde19e5dc71b9d8
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
This makes the font merging possible and solves an issue
with the default font properties inheritance when used
in conjunction with QTextFormatCollection.
Change-Id: If8b543c011122dde9f086f5d696df3b042f7b90c
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
introduced by b0b22e8d49 .
Change-Id: Ia57331ce9373a414f2bc56962412f20ef83bd7ca
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
This simplifies the code a lot and avoids silly mistakes where a
specific integer type is missing (such as char16_t).
Change-Id: Id91dfd1919e783e0a9af7bfa093ca560a01b22d1
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
...and thus consume 4 bytes less per glyph and increase the performance a bit.
It seems, the only CTFontGetAdvancesForGlyphs() returns both x and y
advances, though y advances are always equal to 0 for horizontal
orientation and x advances are always equal to 0 for vertical orientation.
Also, rename `advances_x` to `advances` for consistency
and declare QGlyphLayout's data size in a single place.
Change-Id: I56b20f893f8a6feb7aa870e3edbca99dd93ba2e2
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
A few more HTTP status codes from the 4xx and 5xx series have been
added to QNetworkReply::NetworkError.
For content errors, the following codes have been added:
1. 409 - Resource Conflict
2. 410 - Resource Gone
For server related errors, the following codes have been added:
1. 500 - Internal Server Error
2. 501 - Operation Not Implemented
3. 503 - Service Unavailable
Few of the above codes are quite possible when communicating with REST
based services.
NOTE:
=====
* HTTP error status 400 is interpreted as
QNetworkReply::ProtocolInvalidOperationError.
* QNetworkReply::UnknownServerError is returned for all server related
errors (5xx) not listed above.
[ChangeLog][QtNetwork][QNetworkReply] Added more (specific) HTTP status
codes to NetworkError enum.
Task-number: QTBUG-30880
Change-Id: I9d2a133f6b3869f26710c6eb930dd8b08df31108
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
This aimed to disctinct joining types "L", "T", and "U" from just "U".
Unicode 6.3.0 has introduced a character with joining type "L" and
Unicode 7.0 will add a few more characters of joining type "L", so
we'll have to deal with it anyways.
[ChangeLog][QtCore][QChar] Added JoiningType enum and joiningType()
method that deprecates the old QChar::Joining enum and joining() method.
Change-Id: I4be3a3f745d944e689feb9b62d4ca86d1cf371b0
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Currently QImage::pixel() returns the raw underlying pixel values for
RGB32. For all other pixel formats the returned value is either valid
ARGB32 or ARGB32PM.
This patch masks the undefined alpha field in RGB32 so that the return
value is well defined QRgb. It also fixes one test that relied on the
previous behavior.
Change-Id: If37463528268b7419733499d1f7bfd0d1097d21e
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
Currently INV_PREMUL rounds strictly down. While PREMUL rounds evenly.
This patch adds 0x8000 to the intermediate results in INV_PREMUL before
right shifting, thereby achieving even rounding.
The rounding also makes PREMUL(INV_PREMUL()) into an identify operation,
which means we can safely convert ARGB32PM to ARGB32 and back without
ever losing color details. A test is added to verify this.
Change-Id: I1267e109caddcff0c01d726cb5c1c1e9fa5f7996
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
Each model test gets its own temporary directory, thus there is no problem parallelizing them.
This should reduce the time spent for a testrun of qtbase by around 3 minutes.
When running only the sql tests it saves less since there are no other tests to run in parallel.
=== Timing: =================== TEST RUN COMPLETED! ============================
Total: 4 minutes 43 seconds
Serial tests: 4 minutes 42 seconds
Parallel tests: 1 second
Estimated time spent on insignificant tests: (no time)
Estimated time saved by -j4: 1 second
=== Totals: 12 tests, 12 passes ================================================
After:
=== Timing: =================== TEST RUN COMPLETED! ============================
Total: 4 minutes 7 seconds
Serial tests: 50 seconds
Parallel tests: 3 minutes 17 seconds
Estimated time spent on insignificant tests: (no time)
Estimated time saved by -j4: 1 minute 23 seconds
=== Totals: 12 tests, 12 passes ================================================
Change-Id: I355ceed62fae852ad8cd442848e263438afb738e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
q_func() which is declared in Q_DECLARE_PUBLIC is usually private.
We should use q_ptr directly in QObjectPrivate::connect, otherwise
it does not compile when trying to access the private q_func
Change-Id: I235165a0994327102dbb31c390c2cafdffe806dc
Reviewed-by: Kurt Pattyn <pattyn.kurt@gmail.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
This patch adds tests for the consistent handling of transparent
drawing results on opaque formats that was introduced with commit
6f7d370ade
Change-Id: If5d11d0f2e111ef88490a4dc20a64b0858ad5426
Reviewed-by: Gunnar Sletta <gunnar.sletta@jollamobile.com>
This patch fixes an issue when a font that was added with QFontDatabase::addApplicationFont
can not be removed any more.
The reason for that is that QFontconfigDatabase::addApplicationFont adds the font to the FontConfig
application set from where it cannot be removed any more and is picked up every time the font database is
repopulated (e.g. after a call to QFontDatabase::removeApplicationFont).
This also fixes the QFontDatabase autotest which unfortunately does not fail on linux, because it tries
to add "FreeMono" (which in most cases is already there as a system font). So this patch removes FreeMono and adds
LED_REAL as test font.
Change-Id: I2fa5f4df0ad2099ac28673760ea25234c725dfc6
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Most of the test is executed in RTL mode since it is never restored.
Task-number: QTBUG-36395
Change-Id: I110966085a5a265f093fc4479eebc1f1bf0614c1
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The tests then have a predictable, stable environment and do not depend
on file system operations.
Task-number: QTBUG-23697
Change-Id: Ibbd356f8bd7419ec4a3a88d2c0b5cd0830049790
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Implemented that way in src/widgets/widgets/qmdisubwindow.cpp:2081.
Change-Id: I82fdf0c04f1655a130c5e6a6f1e23d325d546ab3
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
The support for QArrayData variadic arguments without C++11 for GCC
has been removed in commit 69478da0f0 . Change the autotest to reflect
that, too.
Change-Id: I40468f5d67cb2db553fd7a7d5b604f46403ac538
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
