For built-in types, this is a compile-time assert - we should not have
any types in Qt for which we have neither debug streaming nor a
QTest::toString specialization implemented. A build of most of Qt
submodules passes with this change, after minor modifications to some
tests. We cannot declare QSizeHint::Policy as a metatype after the
QMetaType has already been instantiated for it, and the QDebug stream
operator for QElaspedTimer needs to be correctly declared within the
namespace.
Add a self-test function for a custom type, and update reference files
of the self-test.
Task-number: QTBUG-104867
Pick-to: 6.4
Change-Id: I2936db5933f4589fce45f47cf2f3224ed614d8c9
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Before 0681a2dd5a, QCOMPARE'ing types
for which no QTest::toString specialization exists did not output
Actual and Expected lines on failure, as that would only print <null>
for both values (which then look like the same value, confusingly).
Commit 0681a2dd5a changed that behavior,
and started printing the confusing <null> values.
Take care of the logic in the formatFailMessage function: if both values
are nullptr, then print only the variable names, but not the confusing
<null> text representation of the values.
Remove dead and duplicated code related to the formatting logic, add a
self-test function, and update the expected_cmptest files.
Fixes: QTBUG-104867
Pick-to: 6.4
Change-Id: I4be98e79f91196b14690a2cc0a68ffd50b431a45
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Previously trying to execute a test function with an unknown data tag
would print an error message but exit with 0.
This patch stores a test failure, and continues trying to execute the
rest of the command line arguments, if any. In the end the process exits
with the usual exit code (number of failed tests) which is now !=0.
Pick-to: 6.4 6.3 6.2
Fixes: QTBUG-24240
Change-Id: Id4d422035f173e01e77ca88028dfd94dc0f9085c
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The siginfo_t parameter allows us to show what process sent a signal or
the crashing address. Additionally, it allows us to determine if the
crashing signal was indeed sent due to a crash.
The selftest tst_crashes produces now:
$ QTEST_DISABLE_STACK_DUMP=1 ./crashes
********* Start testing of tst_Crashes *********
Config: Using QtTest library 6.4.0, Qt 6.4.0 (x86_64-little_endian-lp64 shared (dynamic) debug build; by GCC 11.2.1 20220420 [revision 691af15031e00227ba6d5935c1d737026cda4129]), opensuse-tumbleweed 20220428
PASS : tst_Crashes::initTestCase()
Received signal 11 (SIGSEGV), code 1, for address 0x0000000000000004
Function time: 0ms, total time: 0ms
[1] 201995 segmentation fault (core dumped) QTEST_DISABLE_STACK_DUMP=1 ./crashes
The last line comes from the shell. The code isn't decoded, but on Linux
it's a SEGV_MAPERR. macOS prints exactly the same thing.
I've updated one of the expected_crashes_*.txt output that doesn't seem
possible (the "Received a fatal error" message does not appear in Qt
anywhere).
Pick-to: 6.4
Change-Id: I5ff8e16fcdcb4ffd9ab6fffd16ebc8391234f0e2
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
It's easier to remember what "SIGSEGV" means instead of "11".
GNU libc has offered sigabbrev_np() (non-portable) since 2.32; for older
libcs, we'll be happy with a hardcoded list.
Selftest updated to match... though it didn't seem to be necessary.
Pick-to: 6.4
Change-Id: I5ff8e16fcdcb4ffd9ab6fffd16ebc66ecf6e9465
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Two patches applied to upstream release.
Pick-to: 6.4 6.3 6.2
Fixes: QTBUG-103732
Change-Id: Id64b65c4567433806047a2a34fa85ab5f260e6cc
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
[ChangeLog][QTestLib] QCOMPARE now evaluates toString() on its
arguments lazily, speeding up the general case where the comparison
doesn't fail. This is true for the QCOMPARE functionality provided
by Qt. If you specialized qCompare() for your own types, then you
need to change its implementation in line with Qt's own qCompare()
specializations in order to enable this feature.
[ChangeLog][QTestLib] QCOMPARE calls with nullptr argument(s) will
now print the actual and expected values upon failure.
Previously it was not like that because of the compareHelper()
overload in qtestresult.cpp that treated the presence of
nullptr-arguments as a reason to ignore formatFailMessage() call.
New implementation does not have this check, and correctly
executes formatFailMessage() for all arguments.
Note that the qCompare() overloads that call QTestResult::compare()
internally were not affected by this patch, because they already
defer toString() invocation until the comparison fails.
Some numbers, collected against shared release developer build.
I checked how this change affects the test execution. The idea was
to pick some tests for types that do not have a specific
QTestResult::compare overload, so I picked a couple of QByteArray
tests.
The comparison is done by running a test 10 times and taking the
average execution duration, as reported in the log.
tst_qbytearrayapisymmetry:
Before: 15.6 ms
After: 14.2 ms
tst_qbytearray:
Before: 41 ms
After: 36 ms
The benefit is around 9% and 12% respectively.
Fixes: QTBUG-98874
Change-Id: I7d59ddc760168b15974e7720930f629fb34efa13
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
[ChangeLog][QTestLib] Add QTRY_COMPARE_{EQ,NE,LT,LE,GT,GE}_WITH_TIMEOUT
macros that repeatedly execute QCOMPARE_{EQ,NE,LT,LE,GT,GE} until either
the comparison returns true or the timeout expires. Also add
QTRY_COMPARE_{EQ,NE,LT,LE,GT,GE} macros that simply invoke the
*_WITH_TIMEOUT versions with the usual timeout of five seconds.
Task-number: QTBUG-98873
Change-Id: Ib0d7d1c8c997f442b46acd85da738a8f512cc875
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
[ChangeLog][QTestLib] Add QCOMPARE_{EQ,NE,LT,LE,GT,GE}()
macros. These new macros behave similarly to QVERIFY(a op b),
where 'op' is ==, !=, <, <=, >, >= respectively, but print
a formatted error message with argument values in case of failure.
The formatting is done lazily, which means that the strings will
be generated only when the comparison fails.
Also add a new test for tst_selftest and generate expected output
for it.
Fixes: QTBUG-98873
Task-number: QTBUG-98874
Change-Id: Ic8074798901d7a469b1f58d5cd28bbf49a3da1db
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Add the Q_OS_WIN32 guard for the include of QWinEventNotifier.
Change-Id: I7824b2ee236a370c83fd85a2f594a39cf36b36e6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Replace the current license disclaimer in files by
a SPDX-License-Identifier.
Files that have to be modified by hand are modified.
License files are organized under LICENSES directory.
Task-number: QTBUG-67283
Change-Id: Id880c92784c40f3bbde861c0d93f58151c18b9f1
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
We don't support it any more. I don't think it has ever properly
compiled Qt 6 (and it's no longer working for me against GCC 12's
libstdc++ headers). If you report a bug against it, Intel support's
first question is if you can try instead the new Clang/LLVM-based oneAPI
C++ compiler.
So we support only that one, which identifies itself as Q_CC_CLANG.
Change-Id: I5ff8e16fcdcb4ffd9ab6fffd16eb57a092c8439e
Reviewed-by: Marc Mutz <marc.mutz@qt.io>
Previously, only the first B?XFAIL would be reported, all others would
be discarded. Furthermore, if a B?XFAIL had happened, B?PASS was also
not reported, since the B?XFAIL served as test line. However, if the
B?XFAIL was followed by a SKIP, B?XPASS or B?FAIL, these were reported
as normal, producing exactly the kind of duplicated test line that the
skipping of B?PASS was meant to supply.
So change B?XFAIL to be reported among the messages, but retain the
TODO annotation of the first on the test line of a subsequent B?PASS,
if nothing more drastic happens in the mean time. So now more than one
B?XFAIL can be reported, the test is still marked as a TODO and we
don't get duplicate test lines for a subsequent non-passing result.
This replaces the bool m_wasExpectedFail member with a QTestCharBuffer
m_firstExpectedFail that records the first XFAIL's TODO line (so its
isEmpty() fully replaces m_wasExpectedFail).
Previously, the at/file/line information for a B?XFail would be
supplied as top-level keys in the YAML block for a "Pass" reported as
not ok due to the XFail, as this location information is now part of
the B?XFail's message in the extensions/messages block. Duplicating
the first B?XFail's location at top level would add complexity and is
arguably misleading, as the test result is really a pass (after
ignoring known issues), and the location of the pass is indeterminate
(nominally the end of the test function, but actually also after the
cleanup() call for this test, when relevant), which is why a Pass has
no location information.
Task-number: QTBUG-96844
Change-Id: Ib3f24f56266ff49bf3bc9759ac8263ac69a62130
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
In the process, split it from its comments block and don't bother with
a YAML block if it would only have contained comments.
Task-number: QTBUG-96844
Change-Id: I08c20f796252bb270ba9caa4c055cdcc0843a88b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When producing a diagnostics block, include the file and line
information, if we have it, to describe it. This presently only adds
this information for skip, but could in principle do the same for a
B?XPass.
Task-number: QTBUG-96844
Change-Id: I6cc375d98e2369eba262010f9c2dfbcba931a6f1
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Our TAP output was delivering messages as comments before the test
line, where TAP clearly expects the details of a test to follow its
test line. Version 13 provides a YAML block to deliver diagnostics and
encourages use of this, so accumulate our messages in a
QTestCharBuffer instead of emitting them one by one.
However, messages produced after a test has produced its test line
belong to that test, but are too late to be included in its
diagnostics block, so should be emitted immediately as before, albeit
now with a type prefix. This at least separates such messages, from
the end of one test, from messages produced early in the next.
In the process, add a type-prefix to each, to make clear what type of
message it was. Since the Yamlish supported by TAP consumers doesn't
support a way to have many messages, use the extensions: top-level
hash tag with a messages: sub-tag to gather our messages as a list.
(This expands at least one expected output file significantly and
substantially rewrites some others.)
Add methods to QTestCharBuffer, and a helper function, to support this.
Task-number: QTBUG-96844
Change-Id: If44a33da5879ed1670ef0980042599afd516f9d2
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
It relied on the set(QT_REPO_MODULE_VERSION ...) line being the first
thing in the file. It no longer is, and the variable is referenced in
an earlier condition.
Change-Id: I2bd2abd2a5680782ddd61f4bf4a4a3265b444d52
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When a B?Fail's description doesn't match the QVERIFY/QCOMPARE
regexes, it got output as a comment in the YAML block after the test
line had already reported it as a TODO comment. An empty description
would also have lead to an empty comment in the YAML block. Condition
this fallback output case on there being a description that hasn't yet
been reported in the test line.
Task-number: QTBUG-96844
Change-Id: Id7fe81d26ddb01da3d8003ada8fa590a5e1a166f
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
In all places but one they were treated the same; fix that last one to
match the rest. This removes one line from the YAML block for each
blacklisted XFail test; in each case, this message duplicates the one
on its "not ok ... # TODO..." test line.
Change-Id: Iff2028afccd979db7f2c84e85d1b78541900008e
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Multiple tests use qt_internal_add_resource that copies the
functionality that is already implemented inside the
qt_internal_add_test function. Simplify these test by replacing
the qt_internal_add_resource call with the new BUILTIN_TESTDATA
option.
Change-Id: I18475b817d6f87264f0de53817d6c26c5ccab4e2
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
When running a test under increased verbosity levels, QTestLib would
print "failure location" for every QTest function (QVERIFY, QCOMPARE,
...), even if there's no failure at all.
Keep the code centralized, but split the formatting of failures and
non-failures (other messages).
Task-number: QTBUG-96844
Change-Id: I3c508653176b68579dc0eb0cffcc153a52da2e2c
Pick-to: 5.15 6.2 6.3
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Update Catch2 header to latest released version. Needed
to build correctly with glibc 2.34.
Two patches applied on top of the upstream release. Previously
used Qt specific change extracted to a separate patch file.
Fixes: QTBUG-95842
Pick-to: 6.3 6.2
Change-Id: I67e442bbe756ff00c96a45eabf593f7aecddd628
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
- It should not be built for systems without process feature.
Task-number: QTBUG-99123
Pick-to: 6.2 6.3
Change-Id: I71caa59c2168435894c7d1afcc8226e44178439f
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
It was missing #if-ery on feature regularexpression for one test that
depends on it. One of its comments had a long line. Added some
annotations to make clear what's going on in messier tests.
Change-Id: I06d8748a134591f93b36029713e52ffd826a24dc
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Added tests for repeated skips and failures (from within void lambdas,
to simulate skips and failures from within event handlers). These
exhibit yet more ways to count more than one outcome for a test. The
new QTest::failOnWarning() can also provoke more than one failure from
a single test, and several existing selftests exhibited various ways
for the Totals line's counts to add up to more than the number of
actual tests run.
Fixed counting so that only the first decisive incident is counted.
Tests can still report later failure or skipping, but only the first
is counted.
Added a currentTestState in qtestlog.cpp, by which it keeps track of
whether the test has resolved to a result, and clearCurrentTestState()
by which other code can reset that at the end of each test. This
brought to light various places where test-end clean-up was not being
handled - due to failure or skipping in a *_data() method or init, or
a skip in cleanup.
Fixes: QTBUG-95661
Change-Id: I5d24a37a53d3db225fa602649d8aad8f5ed6c1ad
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Also regenerate the expected output for tst_selftests, to match new
output. Changed one line source code in tst_seftests for the
same purpose.
Change-Id: I930ba4bb290568d6f67a8910a781725f01f08bf1
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Without the fix, some tests from tst_selftests were failing with:
Invalid MIT-MAGIC-COOKIE-1 key
Change-Id: I2d07f28d9b2c69fe8575fdf10b362d962f456970
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
If an incident has an empty description we produced output with a
dangling space. Avoid triggering the inanity 'bot with those.
Reorganise the code to save some duplication.
Change-Id: I1dc29fa8ad4449a4584f11dddcf002e405cd9238
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The rationale for skipping pass after XFail is "to emit a single test
point for" the test; emitting several XFails violates that aim.
Task-number: QTBUG-96844
Change-Id: Ia8626dfc2dded234b3aa530fc2dc2324f1e28400
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Skip ends the test (albeit inconclusively). Rearrange the enums in
the abstract logger, move code to handle skip between relevant
function and tidy up various things that became simpler as a result.
Also reorder the message enum, and its switches, to separate testlib's
internals from the usual Qt messages, and put each group in ascending
order of severity.
Task-number: QTBUG-96844
Change-Id: I2c7a634b9f849830d64eafa750155e66e244b729
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The actual files present for expected data, the test function that
selected which tests to skip and the python function to select which
to not generate data for weren't in sync with one another.
The test-code's reason for omitting three tests was that we lacked
data files for them. So generate those and skip that exception. The
generator script's code to decide which to generate didn't exclude
anything like as many, so update it to match the test-code. In the
process, save repeating a startswith test that was used both
positively and negatively, unifying two conditions.
Extend the generator script's handling of its --skip-callgrind option
by auto-setting that option if valgrind isn't available, to match the
driver program's similar skipping.
The generated data included many files for tests we skip and, as
mentioned already, lacked files for some tests we only skipped because
we lacked them. Remove the unused files, add the lacking ones.
Change-Id: If91696cdd95b7b0d5f3d686bff839f1bf15e121b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The various variants duplicated some rather complex code around
varying setup in the middle. Rework in terms of a macro that defines
main() and takes the setup code as a parameter. That setup code also
had some common structure, so package that in a setup macro that takes
the class to be used.
Reworked various testlib selftests that were using QTEST_MAIN_IMPL();
change to use the new QTEST_MAIN_WRAPPER() and TEST_MAIN_SETUP().
These might be better dealt with by supporting a second form of the
initMain() test-setup function in the test classes, that takes
references for argc and argv, to let a test massage its command-line
options.
Change-Id: I7fb16b38d51c80ba2f5c9c82f3b7a37ffc636795
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When deciding whether to run benchlibcallbrind, the code only tested
_i386; it now tests __x86_64 as well, to match a recent change in the
test itself. As there, reverse the test to reduce negations, flipping
the stanzas it selects between. Also tidy up the code that tests for
valgrind being present - and actually return true, to skip the test,
when it claims to be skipping the test.
Updated test results, now that the test can actually be run and
produce sensible output. Added an _2.txt that matches the results
presently seen in Coin on RHEL 8.4 (despite the fact that a local
build on such a VM produces output matching the _1.txt results).
Change-Id: Ibce09dca06a1eeb73e90fb1345834998683df9d8
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
It unconditionally added -callgrind to its own command-line options,
but the way testlib handles this argument is, in QTest::qRun(), to
re-run the program under the control of valgrind --tool=callgrind,
removing the -callgrind command-line option from the test and adding
-callgrindchild to its command-line options. So we shouldn't re-add
the -callgrind option in the resulting recursive call.
The test now runs quickly, producing sensible output, where previously
it took a very long time. Revised the drivers to reflect this
speed-up, but continue skipping the non-.txt formats to save the need
for variant-output files for many formats. To match that, removed the
unused non-.txt results files.
Change-Id: Iaa99c1b5964d50bccfc6076a21896791b6bbf289
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
The given reason for needing to define it was that there was no way to
test whether <valgrind/valgrind.h> is available to #include; but we
now require C++17 hence __has_include(). However, moc doesn't seem to
grok that, so move the test's #if-ery inside the test, since otherwise
it gets omitted because the test's metatype doesn't know it's there.
Change-Id: I75a100787b98a52fad4cfb0b047318a115c998e2
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Its twoHundredMillionInstructions() test has #if-ery to limit it to
gcc and x86; however, it was testing only __i386 for the x86 part,
where gcc defines __x86_64 instead on modern 64-bit systems. In the
process, invert the condition and the branches it controls - positive
tests are easier to comprehend.
Change-Id: I8e906c606c48aa5034e02e3ed5d042fbb1f2ecbc
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Extract Method QTest::qCaught() to take the string handling out of the
header. This should help a bit in speeding up compilation of large
unit test files (provided they use QVERIFY_THROWS_EXCEPTION), although
I have no data to support that.
Since we changed the error message, update the selftest accordingly.
Change-Id: Id4a3c8c34d5df8d0c7a861106d269097f4a6de5c
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This solves the long-standing problem of not being able to easily
fail a test when a certain warning is output.
[ChangeLog][QtTest] Added QTest::failOnWarning. When called in a test
function, any warning that matches the given pattern will cause a test
failure. The test will continue execution when a failure is added.
All patterns are cleared at the end of each test function.
Fixes: QTBUG-70029
Change-Id: I5763f8d4acf1cee8178be43a503619fbfb0f4f36
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Use variable args macros to swallow any extra commas in the
expression. To use this, the type of the exception has to be first.
Use Eddy's suggestion for a new name to avoid breaking the old macro.
[ChangeLog][QtTest] Added QVERIFY_THROWS_EXCEPTION, replacing
QVERIFY_EXCEPTION_THROWN, which has therefore been deprecated.
Change-Id: I16825c35bae0631c5fad5a9a3ace4d6edc067f83
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Swallowing unknown exceptions is dangerous business, as the exception
might be a pthread cancellation token, the swallowing of which would
terminate the program.
Instead of returning from the catch-all-clause, therefore, re-throw
the unknown exception.
Fix tst_verifyexceptionthrown failure cases that use
non-std::exception-derived true negative exceptions to not let the
exception escape from the test function.
As a drive-by, pretty up the macro's docs.
[ChangeLog][QtTest][QVERIFY_EXCEPTION_THROWN] Now re-throws unknown
exceptions (= not derived from std::exception) (was: swallowed them
and returned from the test function), in order to play nice with
pthread cancellation.
Pick-to: 6.2 5.15
Change-Id: Ic036d4a9ed4b7683fa67e27af8bcbae0eefdd0da
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
We have some special handling in qt_windows.h,
use it instead of the original windows.h
Change-Id: I12fa45b09d3f2aad355573dce45861d7d28e1d77
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The --skip-benchlib option was misnamed: there are several benchlib
tests, of which it only skipped the callgrind one. As there is no
other test involving callgrind, rename to --skip-callgrind.
Change-Id: I0179fd35dd79c525f79e4a28a626e964323409bf
Reviewed-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This ensures that a command such as
$ ninja tst_qlocale && ninja tst_qlocale_check
will automagically build the syslocaleapp program that the test runs
from a subtest. Similar for testlib's selftests and tst_QProcess.
As a drive-by, pruned some legacy comments from when CMakeLists.txt
files were generated from .pro files.
Change-Id: I67691a8175aaef124d4104cf1898193993408bdf
Reviewed-by: Alexey Edelev <alexey.edelev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
- Exclude Green Hills compiler from Catch2's POSIX signal handling.
GHS, at least on INTEGRITY, doesn't support full POSIX signals.
Task-number: QTBUG-96176
Pick-to: 6.2 6.2.0
Change-Id: Ifec06dca43ed766cb7335e40fc357d0d7bc463a6
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Minor clean-up.
Split two long lines and added braces, called for by Qt coding style.
Turned some QDebug("this line should never be reached...") into QFAIL();
that should make the effor a bit more prominent if it ever happens.
Likewise for a qDebug() << "ERROR: ..." for code not meant to run.
Change-Id: I1d34fe202f269eb3ad8f58feaabed809e4fec99c
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Ievgenii Meshcheriakov <ievgenii.meshcheriakov@qt.io>
This mimics the effects of test-code delegating checks to other
functions, which can lead to repeated failures. The failing test
should only contribute one to the total of failed tsts. Drive-by:
correct an existing test's reporting of its own name.
Task-number: QTBUG-95661
Change-Id: I370fd2aee378d9fdd35826f0d11677483c60423d
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
