The qmake documentation was missing details about when rc files
are autogenerated under Windows.
A new section about windows rc files is added in
"Platform Notes".
Some hints are added in section VERSION.
Link to new "Platform Notes" section is added.
The VERSION example is extended, too.
Link to new "Platform Notes" section is added to RC_ICONS as
this is a rc file generator trigger, too.
The section "Building an Application" gets a link to the
"Platform Notes" and the system variable list was shortened
by all entries relevant to windows only rc files.
Many links to VERSION were not resolved by qdoc. Adds
explicit linkage.
Change-Id: Iacbc34d53a6bafa6e7658aaee8c751f32e978177
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Change 8836a4d5f0 already added Q_UNUSED in one place,
but that was not enough.
Change-Id: Ib98ba3fe47c0903cc01c56fd3eb8461c8938c75e
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The change has been made so it support possible future change
for QTBUG-26724
Task-number: QTBUG-40346
Change-Id: Ia52835f1a882289a2a22a0b755c943a12b8d3aa3
Reviewed-by: Christoph Schleifenbaum <christoph.schleifenbaum@kdab.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
QDBusConnectionPrivate keeps a pointer to a QDBusConnectionInterface,
which in turn holds a reference back to that QDBusConnectionPrivate.
During the interface object's destruction, the QDBusAbstractInterface's
destructor checks if the interface is still valid. That access is
undefined behavior, but has so far been benign in all our uses since
the memory had not yet been freed (just destroyed) and the reference
count went from 0 to -1.
To be on the safe side, we destroy now the QDBusConnectionInterface
object while the Private is still valid. It will bring the reference
count down from 0 to a negative number, but won't cause any other
effects.
Change-Id: I9a75ad8521ae4e5cbbe5ffff13d1b80057e13809
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
The QDBusConnection spy hook is most often created after the
QDBusConnectionManager global, which means it will get destroyed before.
That means we'll almost surely going to get a null pointer dereference
if we handle the socket close to shutdown.
Change-Id: I27eaacb532114dd188c4ffff13d4c9dc865b8c02
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
This patch addresses a specific Qml problem, where the meta types list
will grow indefinitely when unloading and reloading Qml components over
and over (in an failed effort to save memory).
The implementation is not specific to Qml though, but will cater to all
use-cases where registered types may not live until the application's
termination.
Change-Id: Ic0224dcd19aeb559715ef088b22a30509be2456b
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
This is similar to how widgets work. On platforms like OS X this
becomes essential since in non-exposed state SwapBuffers does not block
so continuing to update continuously leads to undesirable effects.
Task-number: QTBUG-45524
Change-Id: I80f4c00b218561b9e62c3cad1e66f61f4debd4af
Reviewed-by: Jørgen Lind <jorgen.lind@theqtcompany.com>
The implementation used an expensive QHash to keep track of reading threads,
for seemingly no good reason.
Change-Id: Iffa5b18d80f56b8ff22d39aa6bc3d52c2e3ed0ef
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The simple mapping of dividing each position by the
devicePixelRatio does not work when screens have different
DPR. If the low-DPR screen above or to the left of the high-DPR
screen, the geometries will overlap in the Qt coordinate system.
This change introduces a new mapping where the origin of each screen
does not move. This mapping is not perfect: it will have gaps between
contiguous screens. However, it will keep non-overlapping screens
non-overlapping in the Qt coordinate system.
Since there is no longer a simple linear coordinate transform, we
have to add screen-dependent mapping functions, and distinguish between
local and non-local coordinates. A side benefit is that the code is
now easier to read, since we remove most manual coordinate transformation.
We also have to cache the screen of each window: since we send resize events
before screen change events, we cannot rely on QPlatformWindow::screen()
(which is set from the screen change event).
Task-number: QTBUG-45076
Change-Id: Ie95a0b71ae274e02903caa102a98af2050a44129
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
A previous commit added 16-bit per color-channel precision to
solids and linear gradients. This patch extends that to include
texture data.
To support that pixellayouts now have a method to convert to
RGBA64.
Change-Id: I661ae91bd7038085787003608a0af4add057e478
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
This change brings the online template up to date with recent
changes:
- Update links in header and footer.
- To improve page load time and reduce load on qt.io,
do not load images from the main site.
- Fix auto-scroll/highlight jQuery to work on anchors
containing full stop ('.') characters
- Responsiveness: Fix menu issues with narrow views
- Fix styling of subscript/superscript HTML tags
- Make script URIs protocol-agnostic
Change-Id: I219e8ce6ff2e70f9374ad5e037ceda8f710a6a10
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Some kinds of socket options can be applied only to newly created
descriptors. However, a current QAbstractSocket implementation proceeds
to actions immediately after the socket layer initialization. This
disallows a socket tuning in further inheritance.
Add a private virtual configureCreatedSocket() method that gives an
ability to set the socket options before binding or connecting.
Change-Id: I2d858a400cd46ae7fe5bf0b8900220f6121d0132
Reviewed-by: Richard J. Moore <rich@kde.org>
Remove the 100 ms timer that was used to nudge QProcess to write data
to the child's stdin. Instead, react on the canWrite() signal of
QWindowsPipeWriter.
QProcess::writeData needs to call _q_canWrite via the event loop to
start the write operation. The socket notifier code was never in use on
Windows.
Task-number: QTBUG-45457
Change-Id: I99c956ba5f2169f80068eee206543ceb9788b2e0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Some tests were failing because the color was not read correctly from
a QImage. To make it possibly to read more accurate colors a pixel
accessor returing QColor has been added.
Some tests also had the wrong order of arguments, confusing dest and src
formats. This has been corrected, so they test what they claim to test.
A test for RGB30 linear gradients is also added.
Change-Id: Ic623ae1b8e0bf7383056b641c6e8230a1d7dd0dd
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
An Aggregate node is a tree node that is not a leaf.
Change-Id: I4a3964865fb653a217ee75d0b21e563f7f990a1c
Task-number: QTBUG-45450
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Sometimes people mistype QPointer<Foo *> when they actually must
use QPointer<Foo>, add a static assertion for an improved error message
(rather than the usual weird template mess).
Change-Id: Ic77e3e752ac1906b94f3432eaededf0f7a2737be
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Errno is available on WEC2013 and the locale setting isn't
necessary either.
Change-Id: I648d03d842c17b04afdd2d89674119ce020769a4
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
In preparation for refactoring the Node class hierarchy,
the names of a few enum types and the functions that set
and get them are changed so that they will not be confused
with other uses of the word Type.
Change-Id: I0496b46e5d7adffccadcb464aedb2806728e781d
Task-number: QTBUG-45450
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Allow to drag and drop tabs
[ChangeLog][QtWidgets][Important Behavior Changes] The tabs
for the tabified docks can be moved by the user.
Task-number: QTBUG-1049
Task-number: QTBUG-2295
Task-number: QTBUG-4532
Task-number: QTBUG-18883
Task-number: QTBUG-35148
Change-Id: I7ef9d4987db081654bd5d648e14370b3d381a720
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Jørgen Lind <jorgen.lind@theqtcompany.com>
Reviewed-by: Paul Olav Tvete <paul.tvete@theqtcompany.com>
Avoid parsing the composition tables on application startup. Instead let's
do that on-demand the first time a composition key is pressed.
Change-Id: I52feb36246a091b9a84d46e479ba2ad1f5cd1556
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
There's no need to decode the string until the end of the line, it's
sufficient to stop at the end of the quotes.
Change-Id: Ie617d2538511e91d0e0146f98b7e5ea3213b8db2
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
The virtual desktop may be composed of several outputs which are
represented by the QXcbScreen class. XSettings are related to
the virtual desktop, so introduce a QXcbVirtualDesktop class and
store QXcbXSettings in it.
Change-Id: Ib2261675ef8e5136592d4b856bc84646db3a3af4
Reviewed-by: Uli Schlachter <psychon@znc.in>
Reviewed-by: Jørgen Lind <jorgen.lind@theqtcompany.com>
"Embedded objects, such as images, are represented by a
Unicode value U+FFFC (OBJECT REPLACEMENT CHARACTER)."
Also updated the QTextImageFormat docs with the same wording.
Task-number: QTBUG-44538
Change-Id: I64dd5f5be4a0ecc64b30758a72f8b4281c17924b
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
...and simply use the glyph indices provided by the QTextItemInt
(since we always provide the glyph indices, even for non-TTFs).
Task-number: QTBUG-40683
Change-Id: I276e9c6831a770e888f9ba0640353d20711a3d02
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
After selecting all (enabled) transitions for a microstep, filter out
any conflicting transition. The actual conflict resulution is done by
ordering the transitions in order of the states that selected them.
For example: if an event would trigger two transitions in a parallel
state where one would exit that state and the other would not, this
filtering prevents the state machine from selecting both states (as this
case is an invalid state of the whole machine).
This also fixes the exit set calculation for parallel states when one of
its substates is exited and subsequently re-entered in the same
transition. Previously, the parallel state was not exited, and
subsequent re-entry was ignored (because it was still active). Now it is
correctly exited and re-entered.
A side-effect of the transition ordering mentioned above is it also
fixes the non-deterministic behavior of which of the conflicting
transitions is taken.
[ChangeLog][QtCore] Fixed an issue where the state machine could end up
in an invalid state when transitions from a parallel state were not
checked for conflicts.
[ChangeLog][QtCore] Fixed a case where a parallel state was not exited
and re-entered when one of its substates was exited and subsequently
re-entered.
[ChangeLog][QtCore] Fixed the non-deterministic behavior of picking a
transition from a set of conflicting transitions.
Task-number: QTBUG-44783
Change-Id: I2ee72b6a2f552077bfa7aa4d369474ab62f4c2f0
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Reviewed-by: Kevin Funk <kevin.funk@kdab.com>
When a history state is entered that has an actual saved history (so not
the initial state), the entry set was calculated wrongly in some cases.
See the bug report for the specific case.
The fix is to fully implement the standard, so method names in the
private class are updated to reflect the names as used in the standard.
Note that, as mentioned in the bug report, the algorithm as described in
http://www.w3.org/TR/2014/WD-scxml-20140529/ has a bug. What is
implemented is the fixed algorithm as described in the current working
draft as of Friday March 13, 2015. This draft can be found at:
http://www.w3.org/Voice/2013/scxml-irp/SCXML.htm
[ChangeLog][QtCore] Fixed an issue where a history state restore would
activate too many states, possibly putting the state machine in an
invalid state.
Change-Id: Ibb5491b2fdcf3a167c223fa8c9c4aad302dbb795
Task-number: QTBUG-44963
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Also rename them to match the names in the scxml standard, and add the
relevant description from the standard to the methods.
Change-Id: I495832358f5836ed6ea04bf43061d42e29f4f743
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
This completes support for ItemViewActivateItemOnSingleClick in
QPlatformIntegration and exposes the setting in QStyleHints.
Based on the review process, the public name used is
'singleClickActivation' for brevity, as well as to avoid con-
fusion over alluding to "item views" in the Qt Quick context.
KDE Plasma intends to use this via Qt.styleHints to have
Qt Quick-based UI correctly implement the global single vs.
double click user preference for item activation.
[ChangeLog][QtGui] Added QStyleHints::singleClickActivation
to access whether the platform expects item activation to
occur on single clicks rather than double clicks.
Change-Id: I0916e9e68c3a157f95053da8227b2612803653f7
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
On OS X the application icon can be changed at runtime, so this adds a way
to set this via the QPlatformIntegration.
[ChangeLog][OS X] QApplication::setWindowIcon now changes the icon for the
application in the dock.
Task-number: QTBUG-43999
Change-Id: Ice298c0bd52f10f4866f37c6d3f20cf5419b7a1b
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
There is no apparent reason why these functions should be virtual.
The virtual keyword originates from the CVS import.
Change-Id: I4f8051cd4e89ca3037a78d12f17c93265c755b8e
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Jarek Kobus <jaroslaw.kobus@theqtcompany.com>
This patch updates the internal color precisions of solids and
gradients to 16bit per color. This makes it possible to render
at higher precision on non-premultiplied ARGB32, the RGB30
formats and any other hi-color formats if more are added.
[ChangeLog][QtGui][Painting] Internal precision of solids and gradients
is now up to 16bit per color.
Change-Id: Ieae5468bd6de1f56adfa4cb9fa966faf2ed824fd
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
We have configure -headersclean now
Change-Id: Iaf576b16d7c756a08ec5c3dfa32deaa343e5e029
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Add an ordinary peek() function which also allows retrieving data from
a specified position. We need this functionality in several places.
Change-Id: Ia4a1b6fe1d7f76cb8f6f1ea34b3e4b89e05a2a68
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add native support for linear and radial gradients to our
PDF generator. This fixes a couple of issues with both the
quality of the generated PDFs as well as sizes of the files.
Task-number: QTBUG-42758
Change-Id: Ib905457e11e4dc52443c76b3761bca8d1fbe9bfc
Reviewed-by: Stephen Chu <stephen@ju-ju.com>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@theqtcompany.com>
Merged in the upstream version, which obsoleted many of the local
patches. The remaining diff to clean 1.6.17 is archived in the
qtpatches.diff file.
Change-Id: I5065435dc5a922d3f4a46eb37a23a4877dde2ee6
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Visual Studio copies all files to be deployed into the MSIL directory
and then invokes MDILXapCompile on it, which checks for managed code and
translates it into native code. The problem is that all entries of the
package will be copied into the MSIL directly, losing the subdirectory
structure (for instance for plugins). Hence we recreate the directory
structure manually by invoking windeployqt a second time.
Task-number: QTBUG-41753
Change-Id: I3d99cbc531bbe883f87b45de37ba71d93472c042
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Check _MSC_VER to detect the msvc version (2010, 2012 or 2013).
Change-Id: I96a73d316a6124e38b2c48c5752dfc22357f8d00
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Remove manual EGL window resizing as this is now handled inside ANGLE.
Change-Id: I0d4c4df71114c60f4ce75e9010f40a0fd58dee1a
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@theqtcompany.com>
The identifiers for configuring a software renderer changed.
Change-Id: I739cedbb0a00bc6be94df716d66cd1520d4f7c9d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@theqtcompany.com>
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
This aligns with Chromium branch 2356.
This version brings more complete OpenGL ES 3 support as well as various
bug fixes and performance improvements.
The following changes were made to earlier patches:
-0000-General-fixes-for-ANGLE-2.1
Removed. All changes are now handled elsewhere.
+0001-ANGLE-Improve-Windows-Phone-support
Consolidated remaining parts from 0009/0010.
+0002-ANGLE-Fix-compilation-with-MinGW
Remaining issues from patch 0016.
+0003-ANGLE-Fix-compilation-with-MSVC2010
Remaining issues from patch 0015.
+0004-ANGLE-Dynamically-load-D3D-compiler-from-list
Renamed from patch 0008.
+0005-ANGLE-Add-support-for-querying-platform-device
Renamed from patch 0013.
-0004-Make-it-possible-to-link-ANGLE-statically-for-single
Removed. Fixed by adding defines to project files.
-0008-ANGLE-Dynamically-load-D3D-compiler-from-a-list-or-t
Renamed to patch 0005.
-0009-ANGLE-Support-WinRT
Removed. Mostly fixed upstream; remaining parts in patch 0001.
-0010-ANGLE-Enable-D3D11-for-feature-level-9-cards
Removed. Mostly fixed upstream; remaining parts in patch 0001.
-0012-ANGLE-fix-semantic-index-lookup
Removed. Fixed upstream.
-0013-ANGLE-Add-support-for-querying-platform-device
Renamed to patch 0005.
-0014-Let-ANGLE-use-multithreaded-devices-if-necessary
Removed. No longer needed.
-0015-ANGLE-Fix-angle-d3d11-on-MSVC2010
Moved remaining parts to patch 0003.
-0016-ANGLE-Fix-compilation-with-MinGW-D3D11
Moved remaining parts to patch 0002.
-0017-ANGLE-Fix-compilation-with-D3D9
Removed. Fixed upstream.
-0018-ANGLE-Fix-releasing-textures-after-we-kill-D3D11
Removed. Fixed upstream.
-0019-ANGLE-Fix-handling-of-shader-source-with-fixed-lengt
Removed. Fixed upstream.
-0020-ANGLE-Do-not-use-std-strlen
Removed. Fixed upstream.
-0020-ANGLE-Fix-compilation-with-MSVC2013-Update4
Removed. Fixed upstream.
[ChangeLog][Third-party libraries] ANGLE was updated to Chromium branch
2356 (2.1~99f075dade7c).
Change-Id: I32ccbfe95e10986bd94be7191dfd53445ea09158
Task-number: QTBUG-44815
Task-number: QTBUG-37660
Task-number: QTBUG-44694
Task-number: QTBUG-42443
Reviewed-by: Andrew Knight <qt@panimo.net>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
This is done by multiplying by the DIP scale factor.
Task-number: QTBUG-44152
Change-Id: I587a66f1a2f7fa3a713c279f5d877e6acb844620
Reviewed-by: Andrew Knight <qt@panimo.net>
