The failing test has been blacklisted in 3ed6f74fb2.
Change-Id: I5a2defd839e2f98690fc8cea9ff18e7503caf0de
Task-number: QTBUG-25294
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
This is for example useful when looking for a possible BLACKLIST
file while doing a shadow build.
Add autotests for blacklist.
Change-Id: I41d3939d31d21d10187fefcb82604736d911b6ad
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
QGraphicsWidgetPrivate::init had a special code path for setting
the item's parent. For some reason that code path caused the
ItemChildAddedChange notification not to be sent to the parent
element, which is wrong. Instead use the "normal" path, which is
what the QGraphicsItem constructor does anyhow.
Change-Id: Iad84cae05d797022a45977d35ca00c80c17c306a
Task-number: QTBUG-45867
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
The behavior of "external" and "internal" transitions is identical,
except in the case of a transition whose source state is a compound
state and whose target(s) is a descendant of the source. In such a case,
an internal transition will not exit and re-enter its source state,
while an external one will.
[ChangeLog][State machine] Added support for internal transitions.
Change-Id: I9efb1e7368ee52aa2544eb84709a00ae3d5350d3
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
As nothing changes in the state machine when selecting transitions for
events and then calculating the exit- and entry-sets, some calculations
can be cached.
The exit set for a transition was calculated multiple times. First in
removeConflictingTransitions, where the two loops would each calculate
them multiple times. Then secondly in microstep(), which would calculate
the exit set for all transitions.
Transition selection, exit set calculation, and entry set calculation
all calculate the transition domain and effective target states for
transitions.
Change-Id: I217328a73db2f71e371eb5f60a0c7b222303f0ca
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
The init()/cleanup() code in tst_qfiledialog and tst_qfiledialog2
currently differs and fails to clean up the settings file
since it only removes the legacy settings under the Qt group
and instantiates a new QFileDialog while the QSettings class
is still in scope. Also, it has no means of clearing the
setLastVisitedDirectory(), which causes the
tst_QFiledialog::completer() and tst_QFiledialog::history() tests
to interfere, leaving the settings in an invalid state.
tst_qfiledialog2 does not use QStandardPaths::setTestModeEnabled(().
- Ensure the last visited URL is always clean by
making QFileDialogPrivate::setLastVisitedDirectory()
static and calling it from init().
- Introduce a cleanupSettingsFile() function to the tests that
cleans both groups and call it from initTestCase() and cleanup()
to ensure a clean state.
- Add QStandardPaths::setTestModeEnabled() to tst_qfiledialog2.
Fixes sporadic test fails when executing
tst_QFiledialog::completer() and tst_QFiledialog::history()
in a sequence.
Task-number: QTBUG-45764
Change-Id: I24de3caabf77be067b385d64ff11b7a07fe12b72
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Completes the inplace converters so that we can rely on inplace
conversions to succede as long as the image depth is the same.
Change-Id: Ia1ae34b5de1bc16e87ff5403bdacfcae44a22791
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Some inplace conversions would not set the requested image format in
the returned image, due to the same conversion being used for several
destination formats.
This patch ensures all inplace conversions return the right format,
and adds testing infrastructure to easily test iterate over all formats
so that they all can be tested.
Change-Id: I68ab17a713ddb2aa8ed6aaf0a0a1ec8bbcb56090
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
The one converters from RGB30 was misplaced in the method table, and
the unpremultiplication from A2RGB30 to RGB30 had an underflow mistake
when alpha was 2.
Change-Id: I92c11ede28611a3dbdce72aca1898845c120c209
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Doing a build on OS X without -developer-build fails.
Change-Id: I49c178ab2428177d9dd94f84620595a4bc132244
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Fixed issue that text/uri-list mimedata got from QMimeData::data()
was corrupted after setting it back via QMimeData::setData()
Change-Id: I2377523a9286519402ab9127ed7f3fa66e39a679
Task-number: QTBUG-45486
Reviewed-by: David Faure <david.faure@kdab.com>
Some QImage methods were not preserving image metadata, or only
preserving some of it. This adds the missing parts and adds a test for
metadata.
Change-Id: Ib5892a23e49dfde5ea26074d3deaa887fa930c6b
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Remove the insignificant_tests CONFIG option in favor of a BLACKLIST
file. The tests blacklisted have been found using CI builds logs.
Change-Id: I34374ed7269f941c330c65d97fe083c83d3df461
Task-number: QTBUG-33574
Task-number: QTBUG-30943
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Remove the insignificant_test CONFIG option in favor of a BLACKLIST
file. This test has been found failing on OpenSuse in CI.
Change-Id: Ibc6af3c30277fec7e422e8bbeccd9437de2a61ce
Task-number: QTBUG-23837
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Use QWidget::move() to position floating dock widgets.
Add a test for QMainWindow::restoreDockWidget().
Task-number: QTBUG-45780
Change-Id: I945917728a663916e8c225b9d3d2a75fa508d68f
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
On OS X 10.10. This test in tst_QComboBox is currently failing in CI.
Change-Id: Ie326f79a900c3ae926c7ebe5bb5880dd422cee60
Task-number: QTBUG-45531
Reviewed-by: David Faure <david.faure@kdab.com>
this makes the distclean targets work throughout qt.
the dreaded confclean target is aliased to distclean.
Task-number: QTBUG-8202
Task-number: QTBUG-20566
Change-Id: I7ac8e3b5b0110825dc93e4fa885281db91c6cf83
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
The QImage inplace mirroring method, failed to handle the middle line
when mirroring both ways (rotate 180). In both other mirroring cases
the middle can be left untouched, but in this case it needs to be
mirrored half way.
To make the logic simpler, double mirroring will now mirror half the
lines instead of half of every line.
Change-Id: Iaa1f1e1c3f7dedfb78891fc93207f6d0c64bcafe
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
For the property to take effect, the button must have its
parent set. This might not be the case when a container like
for example QTabWidget is involved. Move the setting of the
property to the bottom of setupUi.
Task-number: QTBUG-44406
Change-Id: Ic2013865a020986475fa28f2e3805c63d4de8ed0
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Return QLockFile::PermissionError when file does not exist, preventing
the stale file detection logic from triggering.
Add Windows-only autotest trying to create a lock file in
a system folder guarded with checks for elevated processes
and UAC virtualization.
Task-number: QTBUG-45631
Change-Id: I1790f8f925660f6bf1df94c2ced901e6ec57cbb0
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Add a special signal spy that records the time and path received
to obtain information on what triggered it for the flaky
cases where more than the expected signals were emitted.
Task-number: QTBUG-30943
Change-Id: I67510ce5e8e19b49c0ca41457f8357b720cade76
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Could causedSSE4 instructions to be used on non SSE4 machines
in cases when qUnpremultiplywas not inlined.
This reverts commit 964ccc5853.
Change-Id: Ic676ade8f75129e8d37c4d96cbfb2bdb5b794919
Task-number: QTBUG-45741
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test tst_QGraphicsIten::sorting is blacklisted but always passing.
Change-Id: I69bbd4b4bbe227267e16ab5558ddabe7d2c0b1b3
Task-number: QTBUG-41342
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
On OS X 10.10. This test is currently failing in CI.
Change-Id: I1b3a33b404c915e83c5e4fa0a7af69d1b941d93c
Task-number: QTBUG-41342
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
- Make the version regexp a member variable, avoiding repeated
construction.
- Use QVERIFY2() with error message for opening files.
- On failure, try to locate the standard diff tool and produce
diff output for comparison, which should make for example
copyright header changes much easier.
Task-number: QTBUG-44406
Change-Id: Ic759899c1da3394e3eb0cee7b1c722f0945714d3
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The test relies on having at least 2 entries, which is not always the
case.
Change-Id: Ief812c598409fe829edb930e563740e5f2213580
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
This caused reverse order of session items in qt creator. Introduced
in ba287c55ef.
Change-Id: I5c37ca6a1ef4753b6449eb9e87b4def5ea858677
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
In order to obey a palette set globally on QApplication, an application
attribute for checking if it's set at all is added.
Task-number: QTBUG-39800
Change-Id: I26b965e6e18e0e1ca4df03cf343b3527df3636b2
Reviewed-by: J-P Nurmi <jpnurmi@theqtcompany.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Remove the insignificant_tests CONFIG option in favor of a BLACKLIST
file. The tests blacklisted have been found using CI builds logs.
Change-Id: I1a963bdc24f7657731dc0374a8e2c3cbaa49f126
Task-number: QTBUG-22775
Reviewed-by: Morten Johan Sørvig <morten.sorvig@theqtcompany.com>
Merges the SSE4 specific unpremultiply with the normal version, and
adds a SSE2 fallback. There was no reason to split the two since
compile time options will ensure the right version is inlined.
Also adds short-cut for 0 and 255 values.
Change-Id: Ie5aa262f6964219fd3062d4a498f697cf79a4595
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This will be essential on Linux, especially Embedded where PCI IDs are
not that useful.
Change-Id: I2fa8ca07236e8aae203e21fe629d12aab092c7fd
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Cleaning up smoothscale code. Upscaling is improved using existing
optimized interpolation methods, and downscale is given SSE4.1
optimized versions.
Change-Id: I7cdc256c26850948aef7dae26fda1622be6b8179
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
This patch addresses a specific Qml problem, where the meta types list
will grow indefinitely when unloading and reloading Qml components over
and over (in an failed effort to save memory).
The implementation is not specific to Qml though, but will cater to all
use-cases where registered types may not live until the application's
termination.
Change-Id: Ic0224dcd19aeb559715ef088b22a30509be2456b
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
After selecting all (enabled) transitions for a microstep, filter out
any conflicting transition. The actual conflict resulution is done by
ordering the transitions in order of the states that selected them.
For example: if an event would trigger two transitions in a parallel
state where one would exit that state and the other would not, this
filtering prevents the state machine from selecting both states (as this
case is an invalid state of the whole machine).
This also fixes the exit set calculation for parallel states when one of
its substates is exited and subsequently re-entered in the same
transition. Previously, the parallel state was not exited, and
subsequent re-entry was ignored (because it was still active). Now it is
correctly exited and re-entered.
A side-effect of the transition ordering mentioned above is it also
fixes the non-deterministic behavior of which of the conflicting
transitions is taken.
[ChangeLog][QtCore] Fixed an issue where the state machine could end up
in an invalid state when transitions from a parallel state were not
checked for conflicts.
[ChangeLog][QtCore] Fixed a case where a parallel state was not exited
and re-entered when one of its substates was exited and subsequently
re-entered.
[ChangeLog][QtCore] Fixed the non-deterministic behavior of picking a
transition from a set of conflicting transitions.
Task-number: QTBUG-44783
Change-Id: I2ee72b6a2f552077bfa7aa4d369474ab62f4c2f0
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Reviewed-by: Kevin Funk <kevin.funk@kdab.com>
When a history state is entered that has an actual saved history (so not
the initial state), the entry set was calculated wrongly in some cases.
See the bug report for the specific case.
The fix is to fully implement the standard, so method names in the
private class are updated to reflect the names as used in the standard.
Note that, as mentioned in the bug report, the algorithm as described in
http://www.w3.org/TR/2014/WD-scxml-20140529/ has a bug. What is
implemented is the fixed algorithm as described in the current working
draft as of Friday March 13, 2015. This draft can be found at:
http://www.w3.org/Voice/2013/scxml-irp/SCXML.htm
[ChangeLog][QtCore] Fixed an issue where a history state restore would
activate too many states, possibly putting the state machine in an
invalid state.
Change-Id: Ibb5491b2fdcf3a167c223fa8c9c4aad302dbb795
Task-number: QTBUG-44963
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
We have configure -headersclean now
Change-Id: Iaf576b16d7c756a08ec5c3dfa32deaa343e5e029
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
QSaveFile is intended to be a replacement for QFile, and should use the
same permissions for newly created files. QTemporaryFile however creates
new files with 0600 mask by default.
Fix this by making the mode_t argument QTemporaryFileEngine uses
configurable, and using 0666 for QSaveFile (like we do in QFile).
[ChangeLog][Important behavior changes] Files created by QSaveFile do
now have the same rights as files created by QFile. This also fixes a
regression in QSettings: In the Qt 5.4 series, new files created by
QSettings were only readable by the current user.
Task-number: QTBUG-44086
Change-Id: Ie1cc20e9f25c6e72e1bc9176490c419c27c5fc82
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
...which constructs a quaternion using specified forward and upward
directions, so that the resulting Z axis "faces" a given forward direction.
Change-Id: Ib77b8ab5c359a4880b0d946face87026acdc6f0b
Reviewed-by: Paul Lemire <paul.lemire@kdab.com>
Reviewed-by: Michael Krasnyk <michael.krasnyk@gmail.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Add a dedicated operator=(std::initializer_list) that
first resizes the QCLA, and then replaces the elements
one by one.
This should be usually faster than creating a temporary
QCLA and then copying it, except for the case where the
new array does not fit into the allocated stack - but this
is IMO nothing to optimize for.
Task-number: QTBUG-45041
Change-Id: I147d6d01186b1ca3c635b2c8365d8f6e638ce6fe
GPush-Base: 08de3113051e1289f0de0651ec5647c9ee6feb27
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When the size adjust policy is QComboBox::AdjustToContents, the combobox
sizeHint was recalculated on dataChanged, rowsInserted, rowsRemoved,
and setModel, but not when the model was reset. This led to truncated
items in the combobox when models are filled asynchronously.
Task-number: QTBUG-5413
Change-Id: I3456c327d680dfffa58d6dcb26c79456c67b2a32
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Concept of 'current position' exists only for random-access devices.
As documented, for sequential devices QIODevice::pos() must always
return 0. Prevent a modification of the internal 'pos' member in
QIODevice::readAll() method to follow this rule.
Change-Id: Ida2ee6a629ccfc3068d62f95ab1064ada13fdda5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Instead of making insignificant the all platform for
QtBase 5.5 integration.
Change-Id: Ief3f29c094bdbc90e684f19c1077ee595fb7d581
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
It was printing the following error:
arguments to dbus_validate_bus_name() were incorrect, assertion "name !=
NULL" failed in file dbus-syntax.c line 248.
This is normally a bug in some application using the D-Bus library.
Change-Id: Iee8cbc07c4434ce9b560ffff13d0586189ba3a79
Reviewed-by: Liang Qi <liang.qi@theqtcompany.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
QOpenGLContext::defaultFramebufferObject() knows nothing about QOpenGLWidget
and QQuickWidget. The problem is that this function (and others that rely on it)
is expected to give the widget's backing FBO in paintGL() and friends.
To overcome this, we have to provide a way for such widgets that indicate what is
the expected "default fbo".
Task-number: QTBUG-43269
Change-Id: I43f439f8609382b9f7004707ab0ef9f091952b4f
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Tests are now passing in CI.
Change-Id: I0051fb7070c1c1027c557eba9dde6367ad59ac7a
Task-number: QTQAINFRA-837
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
