Is needed now that we write QMAKE_MAC_SDK with a !host_build scope
in qdevice.pri.
Change-Id: I298cc660b496460190337c175aef684a5522d5cb
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
qdevice.pri is not target/host specific yet, so we were loading
it and overriding QMAKE_MAC_SDK to iphonesimulator eg., even
for host tools such as moc.
Change-Id: I10277e60e1da84dda239e32a6f19b40dc48f084a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Version 3.1, shipped with Xcode 4.3, has the same issues compiling Qt's
AVX code.
Change-Id: Icb778fbd9d61f01aa84365661af050c9442d4d7f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Based on the Necessitas project by Bogdan Vatra.
Contributors to the Qt5 project:
BogDan Vatra <bogdan@kde.org>
Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
hjk <hjk121@nokiamail.com>
Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Paul Olav Tvete <paul.tvete@digia.com>
Robin Burchell <robin+qt@viroteck.net>
Samuel Rødal <samuel.rodal@digia.com>
Yoann Lopes <yoann.lopes@digia.com>
The full history of the Qt5 port can be found in refs/old-heads/android,
SHA-1 249ca9ca2c7d876b91b31df9434dde47f9065d0d
Change-Id: Iff1a7b2dbb707c986f2639e65e39ed8f22430120
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
If the command is quoted, it can contain anything but quotes (we do not
support escaped quotes, so single quotes have to be used). If the
command is unquoted we look for the first closing parenthesis. We used
to do this using .*?, but the greedy modifier '?' didn't seem to work,
so we now use an inverse character set.
Change-Id: I40660ce7aef6a6b6d480292d28da1b079bb161da
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Instead of setting it explicitly to 10.6. Before 736e4258a this was
not a problem, as we were hard-coding the version flags as part of
the C/CXX_FLAGS for each makespec, so getQMakeConf would pick
them up automatically. When 736e4258a introduced sdk.prf as the
place to resolve these flags in a single place, it broke the
qmake build for macx-clang-libc++, as we were then falling
back to the 10.6 target hard-coded in configure.
We fix this by duplicating some of the logic from sdk.prf, by
pulling out the QMAKE_MACOSX_DEPLOYMENT_TARGET variable
and adding to the C/CXX_FLAGS.
Change-Id: I04afc7525031727c2504588c70dd3f7892cc8e42
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is enabled only for -developer-builds and only for certain
compiler-version combinations that are in a whitelist.
It also requires each library, plugin or tool to declare whether it is
supposedly clean of warnings. When most targets are clean, we can
consider inverting.
Change-Id: I17b5c4e45aee5078f9788e846a45d619c144095a
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Should be applied to Qt modules. Not interesting for third party
users.
Change-Id: I8fce821af397e3ace011a426c762319f6d30004f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
The dbus_watch_get_fd function was deprecated in D-Bus 1.2 (technically,
in 1.1.1, but that was a development release) because it had a bad name.
Sockets on Windows have file descriptors, but they are not shared from
the same pool as the CRT library's file descriptors.
This commit raises the minimum required version of D-Bus to 1.2. This is
the first requirement raise since this code was introduced in 2006. For
some reason, the D-Bus 1.2.0 release seems to be missing, but 1.2.1 was
released on 04-Apr-2008. That's ancient enough for all distributions
Qt 5 is supposed to run on.
Change-Id: Ia6bbc137fffbb27c77290ed3e32d3380f0ae3c54
Reviewed-by: Lorn Potter <lorn.potter@jollamobile.com>
The LLVM version in Xcode 4.5 and below does not handle the GNU
assembler syntax in the pixman assembly file.
A possible alternative workaround is to include a preprocessed assembly
file using https://github.com/hollylee/gas-preprocessor.
Change-Id: Id95add669c60d3a7da823e5975afdd1f88f71977
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Clarify in the configure --help documentation that the text between
parentheses in the -make option indicates the default parts, not all
the parts that can be chosen from.
Task-number: QTBUG-28826
Change-Id: Iac9cf294b8054823ecfaf262aeafab7779ce4c8b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Must use ; as the path delimiter instead of :
Change-Id: I549e1652ef5bbae09c8fddec3e83ac9f52cec3a4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
this makes it possible to exclude modules from the build without moving
their sources out of the way. substitutes the much-requested -no-webkit.
not adding a symmetrical option, as it is relatively pointless:
to build only specific "leaf" modules, you only need to run
"make module-qt<module> ..." once you configured. and removing
particular "intermediate" modules is achieved with this very option.
Task-number: QTBUG-26697
Change-Id: I25cebdbd029885a2c653c4cde696f9bb78691768
Reviewed-by: Tuukka Turunen <tuukka.turunen@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Replace the old sed / template @FOO@ method with echo.
Enable MSYS bash to build qmake.exe
Use qmake/Makefile.unix for all win32-g++ builds.
Change-Id: I6e27d69b28d27131838bbbb3a4ee5a08b470f31b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Instead of setting -isysroot in both arch.test, compile.test, the various
mkspecs, and sdk.prf, we now propgate the chosen SDK as the qmake
variable QMAKE_MAC_SDK, which is then handled exclusivly in sdk.prf.
The QMAKE_MAC_SDK variable, and -sdk argument to configure, is expected
to be of the short-form name, eg macosx or iphoneos, not a full path, as
that's what Xcode also expects. We take care of translating that into
a full path for -isysroot/-syslibroot in sdk.prf, using xcodebuild as
a helper.
Change-Id: I281655b2fa5180c6e78ffdce36824e4a91447570
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
So that mkspecs and features may rely on the host_build test.
Change-Id: I18fee4820d9e2904285afcc7ddb8f1cc3d025fef
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
... instead of as a fallback in default_post.
it was this way in qt4, and it requires less code to be written in the
end. we are already doing it for debug/release as well.
Change-Id: I6e02849d61d14a18375cf64a5990768931ebac48
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
The chosen makespec may spit out errors for various reasons, which will
influence steps such as detecting pkg-config or the architecture test.
It's preferable to catch any issues with the makespec as early as
possible and exit configure before the errors propagate to tests.
Change-Id: Iecbf3217c36dea9f5e0677c58171b72cb6ce1e0b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Passing -sdk to configure should affect the target build, not host tools.
We skip passing MAC_SDK_FLAG for the host arch test as well, since as for
qmake the SDK should only apply to the target.
Change-Id: I3902355715234b9300a65d3095b9c925d9492311
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
The exact same hunk is present 100 lines below.
Change-Id: Ia3d61037b29186368e30f95f4162282d38bca972
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This allows for example the iOS mkspecs to use xcode-select to get the
path to Xcode's /Developer directory, which is then in turn used to
set up QMAKE_CXX (which is needed by configure).
Coprocess is GNU awk specific, so we're just using getline.
http://www.gnu.org/software/gawk/manual/html_node/Getline_002fPipe.html#Getline_002fPipe
Change-Id: I7e88112bea68f039361d6e96ee581eedf129ab02
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Change the default libexec directory to 'lib' on Windows for default
configurations. This makes sure that e.g. qtwebprocess can actually
find & load the right Qt libs.
A separate libexec directory was introduced to avoid conflicts between
a system-wide Qt in PATH and a custom Qt installation. However, since
there are no system wide Qt installations on Windows this isn't an
issue, but getting the executables to find its Qt libraries is.
Alternatively we could have also placed it in the 'bin' directory.
However, putting it in the 'lib' folder carries the notion that,
unlike the binaries in the bin, the libexec executables might have
to be deployed with a target application.
The exception is when a separate archdata prefix is specified, and
$$archdata/lib won't contain Qt libraries. In this case we use libexec
like on the other platforms too.
ChangeLog: [Qt for Windows] Fixed launching of QtWebProcess.exe by
changing default libexec directory to 'lib'.
Task-number: QTBUG-29661
Change-Id: Icbb15fb98474d6fef8ac9310f2e2b482d3282f79
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Jocelyn Turcotte <jocelyn.turcotte@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
On Windows, it's completely different and we don't currently support that
compiler anyway.
Change-Id: Ie3365ea103c93c63e79ebb1d4908c361173ac449
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The current code matches *g++*, which matches "clang++" and detects
Clang as GCC. That's highly incorrect.
Change-Id: Ifd85bbd35aa130be3094fc75d471614d06ca23bd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Keeping accessibility and only disabling the bridge will
enable more builds to work.
Warning about disabling accessibility disabled is needed
because in QStyle it is used to discover semantics about widgets
(if a toolbutton is in a toolbar).
Change-Id: Iae4e6ab63479743bdd70cba4b1954ec7cf3f88e9
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
eventfd(7) uses less resources than a pipe, as it only needs to store a
single 64-bit integer, as opposed to a full buffer.
It was introduced first on Linux version 2.6.22 and glibc 2.7. However,
both the configure-time test and the runtime usage require the use of
EFD_CLOEXEC for thread-safety, so this code will be enabled only for
Linux 2.6.27 and up as well as glibc 2.9 and up.
Change-Id: Ic7e10b28d7b1d4ca24be614ed84055c4429a68e4
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
On Mac, GCC and Clang print "(framework directory)" at the end of the
directory listing for includes if that's a framework dir. The directory
with "(framework directory)" at the end does not exist, so it doesn't
affect anything by being there.
But we don't have to keep the list longer just for that.
Change-Id: I3d031d3d15c75801ec0d6112b2c913bd63e5def3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Make the settings path to be relative to $prefix, instead of absolute.
And update the configure -help output to match the actual code.
Change-Id: I71e4ad6e3db046fec95ef057ae7f7bc566bc5794
Reviewed-by: Sune Vuorela <sune@vuorela.dk>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
it's completely broken, and i have no time to fix it properly now.
configure runs no qmake -r by default any more, so it's fast enough.
Change-Id: Ib2b4c68f1fc2fe95accecbe93dd5a87c9b015692
Reviewed-by: David Faure (KDE) <faure@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
The configure.exe already supported the -directwrite flag for some time.
This commit adds this flag to the configure script as well so
environments which use MinGW as cross-compiler can now also
optionally enable DirectWrite support.
The original configure.exe pieces were added in commit
c0fed43b04dec8bd549043d3ea5e28908128082c of the Qt4 repository.
The directwrite argument which this commit adds to the configure
script and the behaviour of it should be exactly the same as the
current configure.exe.
To get Qt built with DirectWrite support using the MinGW-w64 toolchain
at least mingw-w64 trunk revision 5451 (Nov 10 2012) is needed
Change-Id: I519718068cf5732c7ebcbf0a0fafb6b747db0bcf
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This means the xcb plugin library will be named libqxcb.so instead of
libxcb.so, which doesn't clash with the system's libxcb.so. We need to
consistently apply this on all platforms for static linking to work.
Change-Id: I1640a7cae7b9846bbe62b19ab1c2c5bad7d02b4c
Reviewed-by: Miikka Heikkinen <miikka.heikkinen@digia.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Configure will now generate QT_DEFAULT_QPA_PLUGIN qmake variable
to specify the default QPA plugin.
"CONFIG += qpa_default_plugin" statement in application .pro file
will add the default QPA plugin into QTPLUGINS.
"CONFIG += qpa_minimal_plugin" statement in application .pro file
will add the minimal QPA plugin into QTPLUGINS.
Task-number: QTBUG-28131
Change-Id: I12a241005f30b37467d783b50f0369b47e605e68
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
the compile-all-mocs-as-one-file feature is gone for years
Change-Id: I6c35bce59c36b6920af2498661172b5938eeba52
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
they cannot be legally used outside qtbase - it's the antithesis of
modularization.
Change-Id: I847844ea0ddce599f130f396d68cb61fa8f34135
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
-largefile is regarded as a library named argefile and added to
Makefile as a link flag. It will cause a link error.
Change-Id: I8ac30896d4e473f7e98c937c8906b1b9c620cf1e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
User applications are those that users run directly, whether it be for
development or not. The executable binaries that the user does not
usually run but is still required for proper functioning are called
"program executables" in Autoconf and they are placed in libexec.
This commit adds support for "program executables" in Qt by adding the
-libexecdir option to the configures, the qmake variable
QT_INSTALL_LIBEXECS (note the plural, to match all other properties),
and QLibraryInfo::LibraryExecutables.
At the time of this commit, the only expected "program executable" is
the QtWebProcess, the WebKit2 helper process from QtWebKit.
Change-Id: I66c3a3e0cf7f9d93b5f88f55f18e957faff608fc
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
The include paths that the mkspecs set into the OpenGL/AGL frameworks
must take the SDK into account.
(The headers in 10.8 have slightly changed wrt 10.7, leading to compile
errors because framework style includes (<OpenGL/foo.h>) within the system
headers are resolved to the SDK framework headers.)
Change-Id: I6113cdb95b462d587f593682e03e81e920f3f672
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Added prepare_docs to qt_build_config.prf (it was added
directly in configure in the source branch)
Conflicts:
configure
tools/configure/configureapp.cpp
Change-Id: I1337c69fc62b1c934e3e39b4409e4857440c9db8
This commits adds a -qmldir configuration option for the configures to
allow the user to change the default location (it defaults to
$archdatadir/qml).
It adds a QLibraryInfo::Qml2ImportsPath value for
QLibraryInfo::location, a qmake property of QT_INSTALL_QML and a qt.conf
configure location entry "Qml2Imports".
At the same time, it makes the qmake .prf files dealing with QML plugins
be the QML 2 version. Those files are new in Qt 5, so we have the option
to choose which version we want to use.
Discussed-on: http://lists.qt-project.org/pipermail/development/2012-October/007136.html
Change-Id: I8c1c53e8685a5934ed0a9a42ba5663297b81a677
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Architecture-depedent Qt data defaults now to something under
-archdatadir. Architecture-dependent data is everything that contains
machine code (e.g., plugins) as well as anything that hardcodes
build-specific data, like qconfig.pri and qmodule.pri. That is:
QML imports: $archdatadir/imports (includes plugins)
Qt plugins: $archdatadir/plugins (machine code)
Mkspecs: $archdatadir/mkspecs (build-specific)
Architecture-independent Qt data defaults now to something under
-datadir. This option existed in Qt 4, but did not differentiate between
arch-dependent and independent. Following Autoconf's lead, --datadir is
the *independent* data root.
translations: $datadir/translations (.qm files are arch-independent)
docs: $datadir/doc
By default, both new options are equal to the Qt install prefix.
(Strictly speaking, for complete Autoconf compatibility, we'd need a
--datarootdir=$prefix/share, --datadir=$datarootdir/qt5 and
--docdir=$datarootdir/doc/qt5, but that's just nitpicking and
unnecessary)
Change-Id: I39c886a6a2d2d2c0b11923c50974179e21f2af76
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
the only thing -no-prefix-install did was changing the install path
defaults on mac. and the result didn't work particularly well.
Change-Id: Iadd0f4b494b6920b595e184f858ef810f5222b0c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This has (and still does) caused lots of grief since
it means accessibility was often unintendedly not built.
Instead copy the lib-at-spi-2 header file needed for the
type enum and build it by default again.
Change-Id: I1ba26f20edff1aeb444c96a37928f36230ac7576
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
Some of the xcb- libraries we depend upon are not (yet) common across
distributions. This is problematic for binaries that should be working
on different distributions. The patch mitigates this by:
Adding the files from
libxcb-proto (version 0.1.6), compiled with libxcb-1.5
xcb-util (version 0.3.9)
xcb-util-image (version 0.3.9)
xcb-util-keysyms (version 0.3.9)
xcb-util-renderutil (version 0.3.8)
xcb-util-wm (version 0.3.9)
from xcb.freedesktop.org/dist to src/3rdparty/xcb.
Adding a configure option '-qt-xcb' to use the sources instead of
linking to the respective runtime libraries.
Task-number: QTBUG-27803
Change-Id: I6ea87daa382871b2b9072a601511523fa0b9f44b
Reviewed-by: Samuel Rødal <samuel.rodal@digia.com>
By not making this a compile time decision we ensure forward
compatibility for older xcb versions if the xcb plugin is built against
a newer xcb.
Change-Id: I744777d53bf7b8deb6eff372494f4403d19d364c
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
we now have qt_build_config.prf which can contain static code.
Change-Id: I3f0ae142fdc5ffb4e1d25e628e809ba15b5f0ac4
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the function is automatically performed by debug_and_release.prf,
regardless what we do with this flag.
Change-Id: Iddec69b35e0e905fdf4133ee240af37d3a8ada0b
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
so they are uniformly available to all modules.
Change-Id: I734f703c5923c42cb26f1456ed960cecc01c4b41
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
instead of symlinking (on unix) or creating a forwarding spec (on
windows), just put the default specs into (the bootstrapped)
QLibraryInfo.
Change-Id: I595500ef7399f77cb8ec117c4303bc0a2ffe505f
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This option is opt-in (default: no). When configured with
"-proxies-system-default", Qt automatically picks up the system
proxies.
Change-Id: I8cc002f29587854f448d97117b08c43d8eedec76
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
We forcibly overwrite the symlink - in case the source dir changes.
Change-Id: I3986b968f787ea0d250887113a0c223e10038546
Reviewed-by: Martin Smith <martin.smith@digia.com>
The new 'prepare_docs' CONFIG option triggers the documentation rules in
default_post to generate two extra targets: prepare_docs and generate_docs.
The prepare_docs stage runs qdoc with the -prepare option, which means qdoc
will only generate index files, and the generate_docs stage will call
qdoc with -generate, which reads the index files and generates the final
output. The regular docs target will then run the prepare_docs target
for all submodules before running the generate_docs target.
This ensures that when generating the final output, qdoc has all the
index files for all the other modules available, to be able to resolve
cross-references between the various Qt modules.
This patch needs a follow-up in qt5.git to add CONFIG+=prepare_docs, so
that the root Qt5 build will be able to hook into this new behavior.
Change-Id: I654d7f0d4d5a41d9be208e6d3a8923bf0194f9ad
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
We forcibly overwrite the symlink - in case the source dir changes.
Change-Id: I3986b968f787ea0d250887113a0c223e10038546
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
We have a new style Fusion that will replace these styles.
They will be moved to a separate
module rather than included in platforms that do not need them.
Change-Id: I51ebbcad5406e99130e5b12e62ba624d1489088c
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
... so we can test those functions with host and cross compilers.
Change-Id: Ifebfdac54580633c797f77b139514cf9d66edd8c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
It's actually looking for the mkspecs (so it can read qconfig.pri to
get the Qt version), so give it exactly what it wants.
Change-Id: I2957b2d93a8837b8492d313209d45ff3ec01704c
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This is a new non-native style for Qt.
It is intended as a replacement for the now aging
Plastique and Cleanlooks styles.
Change-Id: I30c0518a69e4e3b8b2b05ee7d84c3a5a1f307578
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
Reviewed-by: J-P Nurmi <jpnurmi@digia.com>
that way we don't have to auto-generate code for that in the configures.
note that we now load qt_build_config.prf instead of just qmodule.pri,
which means that exceptions_off is set everywhere. we forcibly re-enable
them for testcases to minimize the deviation from default 3rd party usage.
testlib selftests are not qt testcases, so the one that needs exceptions
needs to enable them explicitly.
Change-Id: I1b9360bb11f2e80c92a2b63a7c45991ad17fda1b
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
These options were only used for QWS in 4.x, and their documentation
should have been removed as part of f220f99a6d.
Task-number: QTBUG-27369
Change-Id: Ia85a20bdac40087c02f6876f53ce21568759d697
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Task-number: QTBUG-26140
Change-Id: Ifee00a9d15b053bb9d2c7b0d9bedca45e4d589d3
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
qdocconf files can now reference $QT_INSTALL_DOCS to pick up e.g. global
includes, instead of using relative paths. Qt modules will automatically
get a doc target that builds and installs into the right place (including
supporting shadow-builds) if they set QMAKE_DOCS before loading(qt_module).
Change-Id: Ia408385199e56e3ead0afa45645a059d1a8b0d48
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
GTK_WIDGET_TOPLEVEL was deprecated in 2.20 and no longer available in
gtk 3. gtk_widget_is_toplevel() was introduced as a replacement in gtk
2.18 => make that the minimum requirement.
Change-Id: Ie5d2d8bd824af916a9764c66a7046f07a77b1748
Reviewed-by: Jens Bache-Wiig <jens.bache-wiig@digia.com>
Change-Id: Id0137400f18c8dfe7be7ca44670c16615401d424
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Reviewed-by: Peter Hartmann <phartmann@rim.com>
stack-protector-strong gives performance benefits over
stack-protector-all and is still checking more than -stack-protector,
so seems to be a good middle way and we want to use it when it is
there.
The -shared option for the compiler (not the linker) prevents a
RIM internal version of qcc from forcing -fPIE, and should not harm
in general when set.
In addition, add a method "compilerSupportsFlag" for Windows as is
present in the Unix configure script.
Change-Id: Iba300e9cb82f34043e7b36f8e45287a1aed2a1a5
Original-patch-by: Greg Bentz
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
The default is the current behaviour: strip on installing release, no
strip on installing debug. This option does not change the
installation of debug builds because qmake does not support that.
Change-Id: Ic208d5ffe860d5f1ee1cafdc944e12001673d33f
Reviewed-by: Davide Pesavento <davidepesa@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Change copyrights and license headers from Nokia to Digia
Change-Id: If1cc974286d29fd01ec6c19dd4719a67f4c3f00e
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
When qmake is used to get PKG_CONFIG, core and gui are not
available. This motivates CONFIG-=qt. In fact, we don't need any
features for this job.
Change-Id: Id247054d43c50f6aeb62db7585c3e90f57aa36a1
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
The value of PKG_CONFIG might depend on device options.
For example, "-device-option PKG_CONFIG" might be used with configure
or a mkspec might prefix PKG_CONFIG with CROSS_COMPILE which is
specified as a device option.
The shell functions of configure for parsing mkspecs do not take
device options into account, but qmake is pretty good at it now.
Change-Id: I1c9558e550c48e8441ebdac34b82066473c2ce3a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
It is necessary to use the n9 device file for now in scratchbox or/and on the
community open build service because the maemo platform mkspecs file assumes
that a cross-toolchain is used all the time. If no platform file is used, then
for instance certain plugins may not be built in general. There is currently an
ongoing issue with the meego plugin for context management in the Harmattan
components project. That is currently not built due to this issue, so no
orientation works in those applications.
The nice solution would be to make the maemo platform file work with cross and
native toolchains as well, but that requires a decent amount of investigation
and work. Thereby, the scope is extended this way for now.
Change-Id: I172c7d152bdbb2db279526d9fd1ca5648d0cd0a9
Reviewed-by: Simon Hausmann <simon.hausmann@nokia.com>
Also check for c++11 support in configure.exe (which is also used by MinGW builds).
The c++11 check is therefore moved from 'unix' to 'common' directory.
Change-Id: I082848f032c2770e52e34f331b83820f395c06b6
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Yuchen Deng <loaden@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This partially reverts commit
07a978d3d4.
Despite what the commit message said, pkg-config previously worked
and was useful, particularly for static Qt. Qt itself even installs
its own .pc files.
Note: The mkspec win32-g++-cross had a PKG_CONFIG definition to avoid
using the pkg-config installation on the build machine.
Change-Id: Ia4a8d18cd57f74a00bdb9b6a171d20151978a9cc
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Peter Kümmel <syntheticpp@gmx.net>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
the bootstrap does not need CamelCase includes, deprecated headers and
whatnot, so just don't do it. the full thing will be run on qtbase by
qmake.
Change-Id: Idffdd4750a73574c8c32ee75d00080abfe37e03c
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
... provided perl is available.
configure.exe already does that, and there is no reason not to.
Change-Id: If398864697fcfbe4545248cec33e70a1ec4a29a3
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
it needs no special env variables any more
Change-Id: I60a7ab6eabb9280b02cd510418c0842d05fc1306
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this is where the syncqt calls for all modules happen
Change-Id: I544e5fa6950c2babe56d78f5543d2c3262016687
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
DEPENDPATH is hard to get right, and consequently most projects have
broken dependencies.
the easy way out is just adding everying in INCLUDEPATH to DEPENDPATH,
like we do ourselves in qt. if somebody wants to optimize, he can
opt-out.
Change-Id: I7fb56010728fd2b0d2b7d4d26386f366d414ba04
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
And only use the QT_CONFIG,egl syntax in eglconvenience
Change-Id: I81c0602334714f4b27a7e90e7b5859c989e6bd63
Reviewed-by: Paul Olav Tvete <paul.tvete@nokia.com>
Reviewed-by: Qt Doc Bot <qt_docbot@qt-project.org>
The Mac OS X SDK is the only thing that variable is
used for, so give it a name that better fits its use.
Change-Id: Ifd9866bc19edda0e9f0bcb17270eb26a8849401e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Not every MIPS SoC has the DSP extensions, auto-detect them by using
builtin GCC functions. Check for the DSP macros and add the result
for rev1 and rev2 to the cpufeatures.
Change-Id: I3d6c950f170f102514c43b349f9a23ee796d801a
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The XCB platform plugin requires several XCB libraries to work. Without
this fix, we get the build error in compileTest only, which is hard to
check.
Change-Id: I6b599f5ad32661e9dc01db11705d702920350cfa
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
standard paths should never be added to compiler/linker lines, as they
are likely to mess up the lookup order.
pkg-config does that filtering for us, but the home-grown config tools
don't, so we need to take care of it.
configure.exe does not have such auto-detection, so the change is not
necessary there.
Task-number: QTBUG-26850
Change-Id: I2f523d5cffb27c3d0a16cdef6ca8a4877c9983c0
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Reviewed-by: Mitch Curtis <mitch.curtis@nokia.com>
Reviewed-by: Jørgen Lind <jorgen.lind@nokia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@nokia.com>
This reduces dramatically the command-line for compiling Qt sources.
These are private macros, only to be used by Qt's own modules, so the
compiler setting is either the same or, possibly, better. In other
words, in the worst case, when compiling a module with a better
compiler than for qtbase, such module might not enable all the
functionality it could otherwise do.
If we switch to a buildsystem that can support this properly in the
future, these macros should be removed.
Change-Id: I71f2d12ec98c9dd40eaab9de4a17446bd1066020
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
hard-coding it in unix.conf was no particularly good idea for hopefully
obvious reasons.
the windows version is so far just a stub that does what the makespecs
hard-coded - more doesn't seem worth the effort. the guys interested in
x-building may want to rectify it at some point, but it's not going to
be easy.
Change-Id: I8fedd841a8416f8c0c57018752eae9510b5d00d0
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This is prompted by the fact that QMAKE_LIBDIR_FLAGS is no longer
honoured by qmake, so we need to use LIBS. It didn't make much sense
to have the flags separate anyway...
Change-Id: Iaec4d58f9dbac25755bbc3bad7550e03edb5332b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
this cuts down the enormous duplication of identical command line args
passed to compile.test.
this necessitates the addition of a -config parameter to compile.test,
as QMAKE_CONFIG needs to be extended in some cases.
Change-Id: I677b2fea4a407b9e4395e70a25e4e349efb0a946
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is a plugin that bridges the QAccessible world
to AT-SPI 2 on Linux.
Change-Id: I7af22621ee6a3cefc723b137b7f227a611cf6641
Reviewed-by: Jan-Arve Sæther <jan-arve.saether@nokia.com>
a module's project file may set MODULE_INSTALL_LIBS before loading
qt_module.prf to have an alternative RPATH linked into the users of that
module.
this is relevant only for linking against non-installed -prefix builds
of that module, as otherwise .libs from the module's pri file is used
for rpath.
Change-Id: Ib240e748cf130a71a5991dc643c368a983092ead
Reviewed-by: Simon Hausmann <simon.hausmann@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
This fixes a build failure that happens when Qt is configured with
-no-libudev, as reported at https://bugs.gentoo.org/show_bug.cgi?id=430292
Change-Id: I924f023505ab57cca5994f2fd5ff2f8308e61617
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
When using [ ] for tests in shell scripts, the ending ] must be a
separate parameter. Otherwise, it won't work. configure was reporting:
configure:5918: ']' expected
Change-Id: I38a843356ee0feb97edb8692a828306821045c77
Reviewed-by: Laszlo Papp <lpapp@kde.org>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
configure will now run qmake without -recursive, as on modern systems
one can get a lot more out of parallelization done by make, which qmake
cannot do.
use -fully-process to get back the old behavior. -dont-process is
unchanged.
Change-Id: I2874321a963175463ae8992f3ab2b01bc13c9922
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
they are an unreadable and unmaintainable mess. the options are properly
documented below.
Change-Id: If2ec683fb7c3740b19798979f8a1f9cd8d84f457
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This option is important if you want to use configure's
and qmake's -sysroot (e.g. PKG_CONFIG settings, device-files),
but the toolchain (in combination with the rootfs)
is not able to handle gcc's --sysroot.
One known case is freescale's ltib setup where the toolchain
itself comes with all the essential files (e.g. crt1.o),
while the rootfs has none of those files, so gcc's
--sysroot can't be used. The rootfs on the other hand contains
all kinds of "less important" files/packages (e.g. libdbus).
For those "less important" files/packages Qt needs pkg-config
to be able to include/link properly. Therefore one needs
configures -sysroot without gcc's --sysroot.
Change-Id: Iaec9b07012f2945f3ecb3ced0ed95176721b5ecd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The arch.test script is now using SDK settings passed to it.
If you install Xcode without the "UNIX Development" option, this
is essential to let the compiler find standard headers and let
the test program compile successfully.
In addition, let configure pass the SDK settings given on the
command line to the arch.test script.
Change-Id: I49601d3068d83a71e21fdbac287857f2b7abedd1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In systems where no pkgconfig is available, such as QNX, we set
QT_LFLAGS_SQLITE to the default values.
Change-Id: I24edd589ce7baf2614480a91842ca756ead39463
Reviewed-by: Thomas McGuire <thomas.mcguire@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The code is exactly the same as what is already done for DirectFB.
Change-Id: I3b84e67a3e999f692da4110f3ac9c82d98b0637c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Tools for each module should be enabled by default.
Prior to qt_parts.prf, they have been enabled by default, but only by
accident - the value of QT_BUILD_PARTS with respect to 'tools' was
generally not respected.
Change-Id: Icd49d6128d4050ff1c865967a563e9ab88c5a3a2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
that way it is actually possible to add additional parts from the qmake
command line.
Change-Id: I42e0b58424292cebafb57538a879204d370397bb
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
otherwise we get lots of nasty warning messages about missing pri files.
it is arguable whether it is a good idea to do that, but we preserve
mkspecs/modules, too, and the previously built libraries don't just
vanish, either.
Change-Id: Ieded8d8858f1b0135bc3bea894b4a676024ac8ca
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
this makes it unnecessary to dump qmakespec to .qmake.cache and
qmodule.pri.
Task-number: QTBUG-22700
Change-Id: I678c7ee7df2512184b9cd06d7a3be8bbd0b0da15
Reviewed-by: Orgad Shaneh <orgads@gmail.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
modules other than qtbase also need it.
the windows configure already does it that way.
Change-Id: I9adb469f7a0726663b7939e80d8be1e83a6d12d3
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
this will fail now even on unix (and wouldn't have ever worked on
windows), as the full spec name is known only after reading the spec,
and qconfig.pri is read from inside the spec.
matching on the host_build flag is cleaner anyway.
Change-Id: I7da144e89ab3db0fad942d755d8cb0a0f3b85588
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Donald Carr <sirspudd@gmail.com>
Reviewed-by: Girish Ramakrishnan <girish.1.ramakrishnan@nokia.com>
pkg-config returns glesv2 build flags, which are parsed into a few
variables. However, extra spaces get included in these variables and
quoted, which makes includes paths not work.
This problem can only be hit, if you do not have GL ES 2 headers
installed system-wide, but you do have installed into $prefix, and
pkg-config configured to return the configuration for $prefix. Even
though pkg-config returns correct paths, extra space gets included.
Fix it by parsing the strings returned by pkg-config just like a shell
would parse a command line. pkg-config escapes e.g. spaces, so those
escape sequences need to be interpreted, while doing word-splitting. The
result is a quoted list, as expected in the qmake files.
Done-with: Pekka Paalanen <ppaalanen@gmail.com>
Change-Id: I0593ef7e0606ac5ea80da046e45f86806206951a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The SXE feature was used with Qtopia but is long gone. Clean it up.
Change-Id: I55fba97b6382300ba63e94f3a6c415227f571e37
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The Maemo-specific function have been renamed a bit to prevent them
clashing with the more generic stuff.
Task-number: QTBUG-25865
Change-Id: Id55693159e15d5a0c679546eb48308feb48acac9
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Up until now, we had a mess of different macros used for building
DLLs, for building shared libraries on Unix systems and for building
static libraries. Some of the macros were contradictory and did not
work. From now on, there shall be only:
- QT_STATIC: indicates that it's a static Qt build and the export
macros should expand to empty
- QT_SHARED: indicates that it's a shared / dynamic Qt build and the
export macros should expand to Q_DECL_EXPORT or Q_DECL_IMPORT,
depending on whether the macro corresponds to the current module
being built (the QT_BUILD_XXXX_LIB macro comes from the module's
.pro file)
QT_BOOTSTRAPPED implies QT_STATIC since the bootstrapped tools link
statically to some source code.
QT_STATIC is recorded in qconfig.h by configure when Qt is configured
for static builds. Nothing is recorded for a shared / dynamic build,
so QT_SHARED is implied if nothing is defined. This allows for the
existence of a static_and_shared build: with nothing recorded,
defining QT_STATIC before qglobal.h causes the export macros to be
that of the static form. Linking to the static libraries is out of the
scope of this change (something for the buildsystem and linker to
figure out).
From this commit on, the proper way of declaring the export macros for
a module called QtFoo is:
#ifndef QT_STATIC
# ifdef QT_BUILD_FOO_LIB
# define Q_FOO_EXPORT Q_DECL_EXPORT
# else
# define Q_FOO_EXPORT Q_DECL_IMPORT
# endif
#else
# define Q_FOO_EXPORT
#endif
The type of the Qt build is recorded in QT_CONFIG (in qconfig.pri) so
all Qt modules build by default the same type of library. The keywords
are "static" and "shared", used in both QT_CONFIG and CONFIG. The
previous keyword of "staticlib" is deprecated and should not be used.
Discussed-on: http://lists.qt-project.org/pipermail/development/2012-April/003172.html
Change-Id: I127896607794795b681c98d08467efd8af49bcf3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
they are equivalent to QT_INSTALL_(HEADERS|LIBS)/get.
Change-Id: Ic4b47f3ca7db55785b96f19020a2fa020a8d25bd
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
properties are now split into a write location $$[FOO] and a read
location $$[FOO/get]. the write locations are hard-coded and configurable
via qt.conf/Paths as before, while the read locations are configured via
qt.conf/EffectivePaths.
this finally provides a clean solution to the problem that during the qt
build itself tools and libraries need to be taken from somewhere else
than they are installed to.
Change-Id: I956c43bd082afd465e690fe75d0bee3c2c0f7c25
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
