Fixed crash on QCoreApplication::translate() call from qqmlThread while
QCoreApplication::{install,remove}Translator() is called from the GUI
thread.
[ChangeLog][QtCore][QCoreApplication] Calling
QCoreApplication::translate() is now thread-safe.
Task-number: QTBUG-57095
Change-Id: Ie5340a42040a829f311c01332e05d4bbaf60462c
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
tst_qvariant.cpp(80): warning C4309: 'initializing': truncation of constant value
tst_qvariant.cpp(4635): warning C4309: 'initializing': truncation of constant value
tst_qbytearray.cpp(1438): warning C4267: 'argument': conversion from 'size_t' to 'uint', possible loss of data
tst_qbytearray.cpp(1440): warning C4267: 'argument': conversion from 'size_t' to 'uint', possible loss of data
http2srv.cpp(64): warning C4018: '<=': signed/unsigned mismatch
tst_qinputdialog.cpp(352): warning C4804: '<=': unsafe use of type 'bool' in operation
Change-Id: Id012d88b7b20c5c9f128f2ef53753cc1d479f358
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It breaks sth in QLocalSocket which is used in QtRemoteObject.
This reverts commit 5c6210e345.
Task-number: QTBUG-61668
Change-Id: Ib11890923773496e5d998b7709ef93b0a839a759
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
QWinEventNotifiers were limited to 62 instances, because of
WaitForMultipleObject's limitation to MAXIMUM_WAIT_OBJECTS - 1 handles.
Use the RegisterWaitForSingleObject API which does not have this
restriction and executes waits in threads managed by the system. A
central manual reset event per event dispatcher is signaled in the
RegisterWaitForSingleObject callback and waited for in the event loop.
[ChangeLog][QtCore][QWinEventNotifier] QWinEventNotifier is not
restricted to 62 instances anymore.
Task-number: QTBUG-8819
Change-Id: I2c749951453a4b699cc50dada0d6017440b67a4a
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Use M_PI (and friends), where possible, in favor of hand-coded
approximations of various (in)accuracies. Where that's not available
(e.g. fragment shaders), use the same value that qmath.h uses for
M_PI, for consistency. Replaced math.h with qmath.h in places that
defined a fall-back in case math.h omits it (it's not in the C++
standard, although M_PI is in POSIX); or removed this entirely where
it wasn't used.
Reworked some code to reduce the amount of arithmetic needed, in the
process; e.g. pulling common factors out of loops. Revised an
example's doc to not waste time talking about using a six-sig-fig
value for pi (which we no longer do) - it really wasn't relevant, or
anything to be proud of; nor did the doc mention its later use.
Task-number: QTBUG-58083
Change-Id: I5a31e3a2b6a823b97a43209bed61a37b9aa6c05f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Randomly timeouts in the CI.
Task-number: QTBUG-59679
Change-Id: I28410b747b2033fc0ef6286a11c88cd0c07eb247
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
The binary hangs rather than segfaults on that platform.
Task-number: QTBUG-59936
Change-Id: Id7d38edb7c746e3c0cd4b4941e0e19b3d42a628a
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
They have been blacklisted on windows previously and now fail on
macOS 10.12 as well.
Task-number: QTBUG-60993
Change-Id: Ib7a3acfc7f2285c0a587d4abd88a4a218391d623
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Limitation is that the signal needs to be parameter-less
[ChangeLog][moc] moc now supports NOTIFY signals of parent classes in Q_PROPERTY
Change-Id: Iad64c96c3ec65d4be8ad9ff1a9f889938ab9bf45
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Brett Stottlemyer <bstottle@ford.com>
The test has been observed to be flaky on Windows. Introduce
QTRY_VERIFY_WITH_TIMEOUT for diagnostics.
Change-Id: I72abdd2e5544f8f35199876486ab15151f60e5f2
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
On winrt, the default application version is determined by its
manifest file. The template's default version is 1.0.0.0.
Additionally addRemoveLibPaths should not fail if libraryPaths
only contains currentDir.
Change-Id: Ifdd517f1bfe2fdf641f3d728ebe1fa144df1a8ca
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Found by GCC 7.
Change-Id: I90267617a038558e5b5213c598a949baf8d4d9be
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The conditions checked are compile-time conditions anyhow.
Simplify or strenghten a few conditions while at it.
Change-Id: If07f2aedca4c3632d852a8fdb2b3f7eb55a96c93
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: James McDonnell <jmcdonnell@blackberry.com>
There were still two cases where spurious notifications would be
possible:
- user calls hasPendingDatagrams()/pendingDatagramSize() on UDP
socket somewhere outside the slot connected to readyRead()
signal (::WSARecvFrom posts FD_READ notification, even if
a notification for incoming datagram already exists in the
message queue);
- a socket was registered to receive several types of event and
WM_QT_ACTIVATENOTIFIERS message is located between the
different events for this socket in the queue.
Provided patch ensures that the message queue is synchronized with
the Qt event processing mechanism and adds a way to detect spurious
notifications inside the window procedure.
Task-number: QTBUG-58214
Change-Id: I49609dace601f300de09875ff1653617efabd72f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
This allows the use of move-only function objects
Task-number: QTBUG-60339
Change-Id: If3595fca338cf7f3039eb566cc02e4e73cd04c86
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This was simply not working for two reasons:
- The index passed to QMetaObject::metacall was not right (there was an offset
because of the return type)
- If the registration succeeded, the arguments were not even initialized.
The tests in tst_moc always called QMetaMethod::parameterType before calling invoke,
which was properly registering the type. So this was not seen in the tests before.
[ChangeLog][QtCore][QMetaMethod] Fixed crash in invoke() with QueuedConnection and
types whose metatype gets automatically registered.
Task-number: QTBUG-60185
Change-Id: I4247628484214fba0a8acc1813ed8f112f59c888
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
8a375341cf added swap() to QJson* classes
and marked them shared-not-movable-until-qt6.
That unveiled a broken test in QVariant which was relying on QJsonDocument
being not relocatable. So fix the test by using a proper datatype for the task.
Change-Id: Ic35f09f936b00dfaeb368ccb42aecf35cc506029
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
8a375341cf added swap() to QJson* classes
and marked them shared-not-movable-until-qt6.
This change made QMetaType start reporting that QJson* classes were
movable; however, the test used QTypeInfo and not QTypeInfoQuery to
double check that information.
Port the test to QTypeInfoQuery.
Change-Id: I3227a70a8f24c0013257e180e9cb9cfebe9947f9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Seems like an obvious omission.
[ChangeLog][QtCore][QVariant] Can now convert QUuid to and from
QByteArray, not just QString.
Change-Id: Ib56ae86ca0c27adaf1e095b6b85e64fe64ea8d18
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The new overloads do not accept parameters for the invoked function, this
use case is handled by using lambda.
Overloads for non member function pointers and functors are separated as
the return type is not retrieved in the same way.
Move QSlotObjectBase, QSlotObject and QFunctorSlotObject from
qobject_impl.h to qobjectdefs_impl.h in order to make them available in
qobjectdefs.h.
Update autotests of previous overloads because of a soft break in source
compatibility: passing null literals (0, NULL, nullptr, etc.) for the
second parameter of invokeMethod() is not supported anymore.
[ChangeLog][QtCore] Added QMetaObject::invokeMethod() overloads for function
pointers.
Task-number: QTBUG-37253
Change-Id: I6fb67e086d315ae393ce32743c4eb1abd6cc9139
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We don't load and save pointers usually because the pointer value cannot
be guaranteed to remain across program invocations. However, nullptr is
an exception: a null pointer is always a null pointer.
We don't actually have to read or write anything: there's only one value
possible for a std::nullptr_t and it is nullptr.
[ChangeLog][Important Behavior Changes] A QVariant containing a
std::nullptr_t is now streamable to/from QDataStream.
Task-number: QTBUG-59391
Change-Id: Iae839f6a131a4f0784bffffd14aa374f6475d283
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
By adding std::move where it makes sense.
This is not only good for move-only types, but for any type which
can be moved as it saves copies of the return value in any case.
[ChangeLog][moc] Move-only types are now supported as return types
of signals and slots.
Change-Id: Idc9453af993e7574a6bddd4a87210eddd3da48a9
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Commit fb376e0fcc removed an array that
facilitated returning the names of built-in types, to avoid the jump tables
from the switch statement. This commit brings it back but makes the array a
compile-time constant string offset table.
The array is created by way of a set of C++11 constexpr functions, so we
require that compiler feature. I've tested that MSVC 2015 does support
it as well as the ICC 17 when masquerading as MSVC 2015, so I've enabled
for that too. The only compiler left out is MSVC 2013.
If we didn't need to support MSVC 2015, this could have been written
more simply with C++14 relaxed constexpr.
This also adds unit tests to confirm that QMetaType::typeName() does
return null when we said it would. We're testing QMetaType::User-1
(which we'll likely never use) and QMetaType::LastWidgetsType-1 to
select something inside the range of the built-in types.
Task-number: QTBUG-58851
Change-Id: I4139d5f93dcb4b429ae9fffd14a33982891e2ac1
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
For the windows file system engine, we add an extra macro to use
library loading if configured to do so, but avoid it on WinRT, as
none of the symbols would be found.
We also QT_REQUIRE_CONFIG(library) in the library headers and
exclude the sources from the build if library loading is disabled.
This, in turn, makes it necessary to clean up some header inclusions.
Change-Id: I2b152cb5b47a2658996b6f4702b038536a5704ec
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Replace all QT_NO_PROCESS with QT_CONFIG(process), define it in
qconfig-bootstrapped.h, add QT_REQUIRE_CONFIG(process) to the qprocess
headers, exclude the sources from compilation when switched off, guard
header inclusions in places where compilation without QProcess seems
supported, drop some unused includes, and fix some tests that were
apparently designed to work with QT_NO_PROCESS but failed to.
Change-Id: Ieceea2504dea6fdf43b81c7c6b65c547b01b9714
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
A Q_GADGET class can be used both as a value class and a pointer, but
right now QMetaType::IsGadget is only set for value types. This change
introduces PointerToGadget metatype flag which is set for pointers.
This allow for better handling of gadgets in code as well as
disambiguating between value types and pointers to value types.
Change-Id: Id3bd9e18a8eec7ca1cc6b1c25ed03cdc8c0a75a1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
We fully specialize QTypeInfo for most C++ built-in types,
but enums and extended integral types (like GCC's int128_t)
were not covered.
Now that we depend on <type_traits>, we can stop pessimizing
enums and extended integral types in QVector and QVLA by
defaulting QTypeInfo::isComplex to true for such types.
Fix a test that checked that enums were complex types. This should
have been a XFAIL test. Enums are not complex types.
Change-Id: Ibb0fb38cc83e980a428b5573d1db5666593418ae
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
This should reduce the failure rate. We're still doing qSleep of the
same amount of time, but we now only fail if the slip is over 100 ms.
Task-number: QTBUG-58713
Change-Id: I536c32a88bff44dab37afffd14a1afdf0b2e522a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>