It hasn't been necessary for a long time now to write the recursive
file-find function manually. It has just been an obscurely documented
feature of QDirIterator for far too long.
Demonstrate the new QLocale::formattedDataSize() function.
Also sync up the qdoc description of this example with the recent changes.
Change-Id: I9c2bb15bb5ec353d38181b160f0be198774cbea2
Reviewed-by: Robin Burchell <robin.burchell@crimson.no>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The FreeBSD kernel treats them specially, just like link-local (that's
probably why it calls them "interface-local" instead of "node-local").
So instead let's use a random address, which will avoid multiple
tst_qudpsocket, when run on the same network at the same time,
receiving each other's datagrams. It could happen, considering this test
has an 800-second timeout limit.
Change-Id: Ifb5969bf206e4cd7b14efffd14fb592a3166547e
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This is not an official feature of the networking stacks and does not
work portably across operating systems. So just stop trying to do that.
This was failing reliably (not flaky!) with IPv6 on FreeBSD and
Windows. For IPv4, Windows apparently accepts 239.255.0.0/16 but not
other addresses, so remove IPv4 too.
Change-Id: Ifb5969bf206e4cd7b14efffd14fb682c2839e95d
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
This removes at least one special-case we had to have, in Android's lack
of /etc/mnttab. Bionic's _PATH_MOUNTED is already /proc/mounts.
Change-Id: I9407dcf22de6407c83b5fffd14fedc638586d0f9
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This fixes only those that look fixable. There are a number of errors in
the online documentation that look like qdoc tool bugs, like missing
functions (operator==) and documentation text that does not exist in the
source code. This fixes:
- QRandomGenerator(System) constructor showing up
- Links for C++ reference documentation not showing up as links
Change-Id: I9e2892cb6c374e93bcb7fffd14fe21db5a6969d9
Reviewed-by: Martin Smith <martin.smith@qt.io>
It's the right thing to do, as we're in 2017, not 1997. Also, this takes
care to indicate that QAbstractSocket::MulticastTtlOption makes sense
mostly for IPv4, even though it's implemented for both families. In
IPv4, it's used to indicatae the scope, whereas in IPv6 it's stored in
bits 12-15 of the address.
Task-number: QTBUG-46046
Change-Id: I9741f017961b410c910dfffd14ffaabe0a2024d8
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Commit 77942a1bdf introduced the QScopedValueRollback, but without
assigning it to a local temporary, so the value was rolled back
immediately, resulting in always sending touch events async.
Change-Id: Ic7f65c3d38c46813ff06694e883dae3df138b9d4
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
Instead of allocating the full backing store size for
the transparency layer, we make sure we only allocate
exactly as much as needed by the scrollbar.
Change-Id: I55c3172fe3dd2a1f3fd46828463497f9f35cb1ae
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
This one fell off the truck while we were removing
HITheme calls. We add it back by simply rendering a
BLACK RIGHT-POINTING TRIANGLE character.
We also fix smaller issues, such as not displaying
any shortcut related to a submenu action — this is
simply not a thing. The spacing between the menu
item's text and the submenu indicator has also been
slightly improved.
Change-Id: I6c768a5506a5eb9528b0dd76acd52b561266d67b
Task-number: QTBUG-64405
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
On Windows, QFileInfo.isWritable() was returning true in situations
where the file would only be writable with elevated privileges. Using
AccessCheck instead of GetEffectiveRightsFromAcl to get the correct
results.
Done-with: Friedemann Kleint <Friedemann.Kleint@qt.io>
Done-with: Edward Welbourne <edward.welbourne@qt.io>
Task-number: QTBUG-30148
Change-Id: I7a3468ac069bf782ca312078e3a84107b6cd468c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Code examples make it much easier to learn how an API behaves.
One area that the patch tries to address is the distinction
between a relative URL and a relative path.
Change-Id: Ife52172816b89afb6cd810b07d3573480e2cd747
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Common changes to mingw-w64, ICC on Windows, and MSVC toolchains:
- set similar order of variables and its splitting into sections,
- set similar order of flags in variables and the way they are set.
mingw-w64 toolchain:
- move 'gcc-base.conf' include before setting Windows specific
flags, similar to include 'msvc-desktop.conf' in ICC on Windows
toolchain; this leads to consistency with other toolchains
and allows to safely override common GCC variables with Windows
specific ones, when needed,
- move 'QMAKE_EXT_OBJ' and 'QMAKE_EXT_RES' variables to the linker
flags section, according to its purpose.
MSVC toolchain:
- set flags order in 'CONFIG' variable, similar to mingw-w64 toolchain.
Change-Id: I417cc8f7959c669dd504f2c5c11eb879a7989bd4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Task-number: QTBUG-65354
Change-Id: If628c73b05854c13086708c193995062c8b9f9e4
Reviewed-by: Miguel Costa <miguel.costa@qt.io>
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Fixes the fallback painting used with complex transforms to be able to
handle color bitmap fonts which can't be converted to a path.
Change-Id: Id2851607f673b8fc1aea63f92043d0cdebc0fb9d
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
old style connects have protection against null sender and null receiver,
but new style only had against null sender.
Change-Id: Ie555ac078412918e60c3b60830fe1f3abfb7f5af
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
mingw-w64 toolchain:
- remove 'QMAKE_CXXFLAGS_THREAD' variable definition, since
'QMAKE_CFLAGS_THREAD' variable not set for mingw-w64 toolchain.
ICC on Windows toolchain:
- remove 'QMAKE_LFLAGS', 'QMAKE_LFLAGS_RELEASE',
'QMAKE_LFLAGS_RELEASE_WITH_DEBUGINFO' and 'QMAKE_LFLAGS_DEBUG'
definitions, since they're properly set in 'msvc-desktop.conf',
- remove 'DSP_EXTENSION' variable, which doesn't occur anywhere else
within QtBase; its most recent search results relate to
Visual Studio 6.0 and Intel Fortran.
Change-Id: I2ce5c2c9e9ca2c09c1acfcf8c60381d318e8e380
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Change from config to feature in the json and pro files.
Change-Id: I58ddac3c4ad739253bae010f1d5023fc1d481047
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This is necessary for WebEngine at configure time, to be able to query
which of the sanitizers was enabled in order to report unsupported
combinations.
Task-number: QTBUG-64726
Change-Id: I72f8efe4bed3e14114f885bdae16650f1f23b24b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
- Edited gettingstartedqt.qdoc
- update .pro files
- replaced snippet statements by \quotefromfile
- removed second version of notepad.h and notepad.cpp
that were made only for quoting snippets
(\quotefromfile reads from the program code)
- show current filename in header of window
- added checking routine on filename in Save method
Task-number: QTBUG-63984
Change-Id: I5298d761763a4dfeb705a1d9b77354be853ada88
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
Comparing pointers with op< that do not point into the same array is
UB. Fix, in the usual way, by using std::less.
Change-Id: Id2c957557719887b2016632d683dbab8af07b34c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If a top level, parentless widget has Qt::WA_WindowPropagation
set, Qt will crash when trying to resolve the widgets locale.
The reason is that we try to access the QLocale of the
non-existing parent.
This patch will add a check if a parent exists before trying
to access it.
Task-number: QTBUG-61213
Change-Id: I09a6351a12dc1fffab3069b70e3d7b3932317c85
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
When one scrollbar is added, this may cause the other to be
needed as well. This change does a second calculation
immediately instead of relying on a signal through a
QueuedConnection.
Task-number: QTBUG-62818
Task-number: QTBUG-56280
Change-Id: Iee9a083e3a6cd3765e6bb9206687a8a6e7f99cff
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
QHeaderViewPrivate::_q_layoutChanged() was not called when used in a
QTreeView because it was explicitly disconnected in setModel().
The disconnect was added sometime prio to Qt 4.3, but there the signal
was connected to the doItemsLayout() slot. This was correct since
QTreeView::doItemsLayout() is calling header->doItemsLayout().
In Qt 4.3.0 _q_layoutChanged() was introduced and the disconnect was
adjusted. But since _q_layoutChanged() is doing much more than
doItemsLayout() (e.g. restoring hidden sections), functionality was
lost. The problem was already observed for Qt 4.6 (QTBUG-18196) but
only partially fixed.
Task-number: QTBUG-41124
Task-number: QTBUG-54610
Change-Id: Id13a9930d0163812e12a0287016bab9c3aa02068
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Makes sure the ARGB32PM that is painted on always have a defined alpha.
Task-number: QTBUG-55645
Change-Id: Ifcf5fcc2127d255518eca4763845a197da6c7914
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Fixes 5d4089299a commit,
which was causing a build break if qnx pps is enabled.
Change-Id: I8c29f48bde0187a9db02d6325e8a9a0fae760bcb
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Scanning for WiFi networks is causing network disruptions
in the form of higher latency, sometimes globally
for all running applications.
In practice, the default configuration selection algorithm
in QNetworkConfigurationManager prefers configurations
from the generic bearer plugin, due to the way the
plugins are ordered. Removing the platform WiFi bearers
should have no effect on default network configuration
selection.
Task-number: QTBUG-40332
Change-Id: I778281c41a1aaec1949c220a9266677bd788a57a
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
getCursorCapsMode() now matches the Java implementation in
QtActivityDelegate.showSoftwareKeyboard() which is given to the Android
keyboard on InputConnection creation.
The reason we only saw this bug with some Android keyboards was that many
keyboards never call getCursorCapsMode and just rely on the initial hints.
Task-number: QTBUG-51865
Change-Id: I2aae024d9c77ea14e087e3f51a413d15a684179c
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
Reviewed-by: Christian Stromme <christian.stromme@qt.io>
Qt requests full resolution OpenGL surfaces by default.
However, when running as a VMware guest it looks like
the OS silently creates low-resolution surfaces.
This is not possible to detect using the standard NSWindow
APIs for converting to backing coordinates or for
reading the backing scale factor. The result of this
is that Qt will incorrectly display one quarter of
the window content only.
Fall back to detecting if the OpenGL renderer is the
Apple software renderer, which it will be on VMware.
Cancel the high-resolution surface request if this
is the case. This needs to be done while we have a
valid OpenGL context.
Task-number: QTBUG-62357
Change-Id: I33bf12b3bb0408249e6d66e0a8ca86b044bea781
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This works around the inability to build iOS apps for a "generic"
simulator by explicitly setting the Xcode build setting
ENABLE_ONLY_ACTIVE_RESOURCES to NO in order to ensure that all variants
of assets in an asset catalog are built when targeting iOS simulator
devices. Otherwise, we will simply build for whatever the first
simulator in the list happens to be. If the application is then deployed
to a different simulator, some of the assets needed for that device
variant may be missing.
This "helps" QTCREATORBUG-19447 but is not a workaround since this fix
is necessary for command line builds anyways, even though it's unlikely
to crop up in practice there, since one would have to manually deploy
the built application bundle to the simulator using simctl rather than
going through Xcode (which would rebuild for the appropriate device).
Change-Id: Ia41c48dcc715fe79a2c50db66a0ca7a1fea159c2
Reviewed-by: Vikas Pachdha <vikas.pachdha@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
QFileSystemModel had a #ifdefed out experimental code path for watching
single files to track changes in size, which got outdated over time.
Replace the #ifdef 0 by a check for the environment variable
QT_FILESYSTEMMODEL_WATCH_FILES, fix it up and apply some fixes to
related code to make it work:
- Split file names signaled by QFileSystemWatcher on '/' always.
- Do not instantiate QDirIterator on "", which means "current directory"
and results in mixed-up directories.
- Check on lastModified() in QExtendedInformation::operator==() so
that changes trigger an update in _q_fileSystemChanged().
- Fix the #ifdefed out part to compile and not to add directories
to the watcher.
[ChangeLog][QtWidgets][QFileSystemModel] It is now possible to enable
per-file watching by setting the environment variable
QT_FILESYSTEMMODEL_WATCH_FILES, allowing to track for example
changes in file size.
Task-number: QTBUG-46684
Change-Id: Ia5da9170866416c9529251f889814b23d7a7d069
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
... instead of only toolchain.prf.
the license check could go haywire, and everything else that file does
is meaningless in configure context anyway.
Task-number: QTBUG-63452
Change-Id: I5e31c87fe717fda40978c0317556070637e537e2
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
- adjusted to new configure system realities
- centralized 'make install' instructions
- fixed 'make' command for mingw
- externalized the license compatibility question
- removed dated information about postgresql client libs
- removed dated claim that freetds is not stable yet
- updated official sybase client link to point to sap support
- removed apparently bogus "demo" include path from oci instructions,
based on the archive content description
- removed troubleshooting item about static builds - one can use static
"plugins" with a static build just fine. and building dynamic plugins
for a static build is plain impossible to start with.
- removed troubleshooting item about build key mismatch, as build keys
have been removed in qt5
- removed "general info" sub-section titles, as that's bad style
- misc language and minor content fixes
Task-number: QTBUG-62479
Change-Id: Ic4efa9e20a5966b6fc646062aec6d1a8d4ff4158
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
otherwise test de-duplication between modules doesn't work.
Change-Id: I2c6222d853108df223758aa8907dc8d004efd87f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
