All QDebug operator << in custom classes were disabled by
QT_NO_DEBUG_STREAM, which was set by QT_NO_DEBUG_OUTPUT.
Now QT_NO_DEBUG_STREAM is never set automatically, but remains available
for reducing the feature set altogether (qconfig.h).
Remove check on QT_NO_TEXTSTREAM: this define is meaningless, it
doesn't even undefine QTextStream, and this is unrelated to QDebug
streaming anyway.
Change-Id: I5eeed0144fa684d0e790e9dfd9a4aeb956218c39
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test was allocating a new model on the heap each time init() was
invoked, but none of these models were deleted.
Change-Id: Ibe107b2dbc949a5f72940f67c08f4b0f46256c09
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Use a small helper class to ensure that the files created during the
test are removed afterwards, even if the test fails. Also, verify
creation of the files in the body of the test function, not in the
helper, as verifying in the helper won't terminate the test on failure.
Change-Id: I76eff20e54ef6a1ed71d9bbb31e00f41f3d14c38
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This is particularly useful for situations where the user might really want to
be notified about a failure, for instance, in a backup application.
Empty paths are not treated as an error in calling, as the user code cannot
really do anything sensible to handle this error, but empty paths should not be
used.
Change-Id: Iddb44fd39f4e3fac5c3f9f60fb7999e1833280a8
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Denis Dzyubenko <denis.dzyubenko@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
QVariant implementation is based on delegation to a handler. The handler
has rather simple construction, it is a set of function that implements
a switch statement over known types and redirects calls to a right
method of an encapsulated types instance. Unfortunately after qt
modularization project, it is not easy to use types directly from
different modules, as they can be undefined or completely unaccessible.
Which means that each module has to implement own handler to cooperate
correctly with QVariant. We can suspect that list of modules known to
QVariant will grow and it is not limited to GUI, Widgets and Core,
therefore it would be nice to have an unified, from performance and
source code point of view, way of working with handlers.
This patch is an attempt to cleanup handlers. Keynotes:
- Each handler is working only on types defined in the same module
- Core handler implements handling of primitive types too
- Custom types have an own handler
- Each handler is independent which means that dispatch between handlers
is done on QVariant level
- Handlers might be registered / unregistered using same interface
Change-Id: Ib096df65e2c4ce464bc7a684aade5af7d1264c24
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
QCOMPARE and friends should only be called in a test function. Instead
of calling QCOMPARE elsewhere, keep a count of the number of errors and
QCOMPARE that count with zero in the test function.
Change-Id: I9a264e91169a98c30980fdc04a3e45bfb0ca8063
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
There is no need to print out the name of the backend used by each test
run of a test function as every message output by the test function will
have the name of the current data row included.
Change-Id: Ie69881d2ecedce728ea67b5aae1c1196776552a5
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
On Mac, the application's dir is in the bundle, so we need to "escape"
the bundle when looking for the an executable relative to the
application's dir path.
Change-Id: I5c01f7d816ec8cc30f5277202f4eefb0c49a2bc3
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Use the C++ boolean constants true and false instead of the C macros
TRUE and FALSE (which are actually integers), and use QVERIFY instead of
QCOMPARE for verifying simple boolean expressions.
Change-Id: Ie76dfcab6722df6b93b3fa62b0f3437901482932
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Inotify has been available in Linux for some ~6 years now, 7 when Qt 5 will
actually be released, so I'd say it's safe to remove this fallback path now,
particularly as the autotest notes that it's broken.
Change-Id: I49dbb161d4765d63e92f512a6375323c7d37ccbe
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
The value is changed to true. It is a common bug that developers expect
this proxy model to reflect the source model when the source changes.
That requires setDynamicSortFilter(true), so we change the default to
optimize for the common case.
Change-Id: I9bf7efdbda10309fa77aed9391c33054aaae4a29
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Pure syntactical sugar, to match up with what the other container
classes offer.
Change-Id: I0f97de011923d9d204cca0fa906b059dc5054a89
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
... and deprecate the old registerTimer() functions. The new pure-
virtual registerTimer() breaks source-compatibility. Subclasses cannot
be instantiated anymore, since the pure virtual function signature has
changed.
QAbstractEventDispatcher::TimerInfo is no longer a QPair. It is now a
struct with timerId, interval, and timerType members. This is a source
incompatibility that should only affect subclasses of
QAbstractEventDispatcher, which will need to pass 3 arguments to the
TimerInfo constructor instead of 2. If the subclass used QPair<int,int>
instead of the TimerInfo typedef, the QPair<int,int> declarations will
need to be replaced with TimerInfo.
Call the new registerTimer() function with the type from
QObject::startTimer(). Change all subclasses of QAbstractEventDispatcher
to reimplement the new virtual function. The type argument is unused at
the momemnt, except to ensure that registeredTimers() returns the type
each timer was registered with. Implementations for the various
dispatchers will be done in separate commits.
Author: Thiago Macieira <thiago.macieira@nokia.com>
Change-Id: Ia22697e0ab0847810c5d162ef473e0e5a17a904b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Several of the test functions in the QDebug autotest call
qInstallMsgHandler() to temporarily use a custom message handler.
Unfortunately, these test functions were then resetting the message
handler back to Qt's default handler at the end of the test.
QTestLib also calls qInstallMsgHandler() to set a message handler that
redirects debug/warning/fatal messages into the test log. When the test
resets the message handler back to Qt's default handler, testlib's
message handler is bypassed for the rest of the test, preventing any
subsequent debug/warning/fatal messages from being visible in the test
log or subject to testlib's ignoreMessage() function.
This error also caused several of the test functions to fail if they
were run manually. The "defaultMessagehandler" test would fail if it
was run before any other test function and the "assignment" test would
fail if it was run after any other test function.
This commit fixes these failures by using a helper class to ensure that
the previously active message handler is restored at the end of each
test function, even if the test function fails or throws an exception.
Change-Id: I51376724d164c8ad126e5b9be76890bf3e6a9fb0
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
When verifying nonzero results (i.e. that something expected *did* happen),
using these macros allows bailing out of the timer much earlier than the
potential 5 seconds.
My running this on Linux goes from ~147 seconds to ~91 seconds.
Change-Id: Ie1e41252eb4eb295b5c8e795ded02f00eb7f9387
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Don't call QSKIP when omitting the optional part of the test, as doing
so hides the fact that the rest of the test passed.
Change-Id: I9c102e8daeaf9586b2e510c4c9ce697ead290795
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Use QTRY_VERIFY() to fail after a reasonable timeout rather than putting
the test into an infinite loop.
Change-Id: Ie0917556e15999a94cc0587f3f4c11c0d743a228
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Register the meta-type in initTestCase(), which is run once, rather than
in init(), which is run before every test function is run.
Change-Id: Ic62a2469da6a2a85254ffc7c4d893395202c50d8
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The threadCount() test function is unstable and had been disabled by
making it not be a slot. It is better to disable it with QSKIP so that
the test output shows that the test function exists and is in need of
repair.
Change-Id: Iccdc8da31e0d15d922f7e9606835d1ff1a3a4966
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Avoid using bug tracker identifiers in test function names. These
identifiers lose their meaning when the bug tracker is replaced.
Change-Id: Ia867f7c2ec2ab9ed546588843d532ac615a34031
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
The restored test data was marked as failing, but appears to pass, and
the available history does not explain why it was commented out.
Change-Id: I7e9e3ba72fc8fef42c91ee882efa98d25b3d8317
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
When using QSignalSpy, always verify that the signal spy is valid. This
will cause the test to give a meaningful failure when spying on a
non-existant signal. Without this change, tests that spy on a signal to
ensure that it is not emitted (i.e. by comparing the spy count to zero)
could pass erroneously if something went wrong when creating the signal
spy, as an invalid QSignalSpy will always return a count of zero.
Change-Id: I41f4a63d9f0de9190a86de237662dc96be802446
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
QTestLib-based autotests cannot perform verification steps in the test
class constructor. This needs to be done in initTestCase() instead.
Change-Id: Ib1f7f838f052fa0fc5104603bdac01ffd8313aef
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Remove the (-no)-qt3support options from configure, and remove the last
remaining references to Qt3Support, QT3_SUPPORT, and
QEvent::ChildInserted.
The compatibilityChildInsertEvents() tests in tst_QObject and
tst_QWidget have been renamed to childEvents(), which is a more
appropriate name.
Change-Id: Id0b45e9b177efcc8dceee8c9ed8afafedeeace2f
Reviewed-by: Kai Koehne <kai.koehne@nokia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
This adds a new function (and tests) to give the possibility of doing a
QCryptographicHash of a QIODevice, like a QFile or whatever people
needs.
It is a quite handy overload in many cases.
Change-Id: I22fd272f05571844641b3daefcc6746be4e5c7c3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
After 8fd64d22ac (Make usage of internal
QVariant space.) change QVariant started to "inherit" movablity from
interned type.
This change fix it by interning only movable type in QVariant and by
using external allocation for not movable ones.
Obviously, this change has negative impact on QVariant it self, but
after it, QVariant will behave a lot nicer with our containers.
Change-Id: Ibffc95833918f65be737f52d694ee81a2036c412
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We need that information to perform some optimizations in QVariant.
Change-Id: Id9a1716e49e4cedd17cd09a32fea4ff003ef61f2
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
The test was skipped, but still tried to compile code that uses
exceptions. The throwing class it uses was conditionally compiled
out earlier in the file, causing an error for undefined class.
Task-number: QTBUG-23028
Change-Id: Ia2e05a8a0abbf0e913f6c41e85bfee8b85cbc8a5
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
QTest::pixmapsAreEqual() was left in the Qt4 API for compatibility with
some old tests written for Qt3. QCOMPARE() is the preferred way to
compare QPixmaps and provides superior diagnostic output when a
comparison fails.
This commit removes QTest::pixmapsAreEqual() from the testlib API and
replaces the last few remaining calls with QCOMPARE.
Change-Id: I051c0e7d3bda072855fcd262d82e8e540619233b
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Critical bug... Good thing I had backups of my $HOME.
Change-Id: I43b3a80786c946b0aec797036c1164d436d521f8
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This is a regression introduced in Qt 4.8
When QApplication::processEvents is called from a destructor, it is
possible that pending events would still be called on the already
destroyed subclass.
Prevent that by using the same pattern as in QMetaObject::activate
Change-Id: Ida50db07ae089264402dafcde7a41a066479d08b
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
