The documentation says that QUdpSocket emits readyRead() only for one
datagram and that if you don't read it, the class will not emit again.
That should be implemented by disabling of the socket notifier once we
have the datagram already read, but was broken.
In turn, that breakage caused a live-lock of the event loop: since we
didn't disable the notifier nor read the pending datagram, the event
loop would fire every time for the same datagram.
The re-enabling of the notifier was already working.
Task-number: QTBUG-43857
Change-Id: Ic5d393bfd36e48a193fcffff13bb32ad390b5fe8
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
The selection update is not implemented on other platforms (if needed at
all).
Task-number: QTBUG-39440
Change-Id: I8eb8c4eb1c23ba2d246bc95f1c77dc9da9e22495
Reviewed-by: Jan Arve Sæther <jan-arve.saether@theqtcompany.com>
This is like value(), but returns an iterator instead of the value().
[ChangeLog][QtCore][QAssociativeIterable] Added find().
Change-Id: I029fc8f91cef78f718d419587a2a50ffd2bf7632
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Qt already has solutions for cross platform isnan and isinf logic. We
should use that instead of duplicating it.
This should also fix compiling tst_qstring on MinGW with C++11.
Change-Id: I7b691fd47701a8f07e1a1fe08a95a0aca43ccca1
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Since the conversion to a long name was already there, also support
creation from a long name.
Change-Id: Iad712db7447fb0a0a18f600b7db54da5b5b87154
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
We forgot to initialize the tracker if create() was used.
Task-number: QTBUG-43696
Change-Id: Ic5d393bfd36e48a193fcffff13b740931ff2204b
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
For windows that do not have WS_EX_TOOLWINDOW set, the WINDOWPLACEMENT
API uses workspace/available aera coordinates. Introduce a helper
function to return the offset and use that.
Task-number: QTBUG-43872
Change-Id: I329c640f180524699b45b855b4583f447c4a0987
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Replace by QCOMPARE where applicable; introduce message to generate
output for failed comparisons with QVERIFY2().
Task-number: QTBUG-43872
Change-Id: I09c8f9fd31ceed224e441f253049f68907ca0d7a
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Commit 1259c5768e410361bcd8b5cf0c2057a2ebabda83 in qtdeclarative removed the
ability to create QWidgets in QML by giving them the correct parent, which
requires calling QWidget::setParent instead of QObject::setParent. This patch
introduces a hook that will allow QtQml to give widgets a proper parent.
Change-Id: I84c57ca5032582c43e405219343d55ac9cf2ffa0
Reviewed-by: Jørgen Lind <jorgen.lind@theqtcompany.com>
Most of the QIODevice functions already have a locally cached
"sequential" flag. Make the rest of them follow this strategy.
This eliminates the need to use private caching members.
Change-Id: I0edb2c9b7c5f411c5bee25c425e7b40e3c9021d3
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: hjk <hjk@theqtcompany.com>
When multiple sections were grouped together, sectionItem.size was the total size of grouped sections, not the size of one section.
Task-number: QTBUG-40462
Change-Id: I401a1583dd30880ccf5b4c105a237d6563f212e8
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
The NSStrings return by QString::toNSString are autoreleased;
manually releasing them is not correct. The test still
works (no leaks or double deletes) since there is no
autorelease pool in place when running it.
We don't want to encourage incorrect usage: remove
the release call an add an autorelease pool.
Change-Id: Ic566fd3a8efd6cbc0eb6db850248a68bfc8fed0b
Reviewed-by: Timur Pocheptsov <Timur.Pocheptsov@digia.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
Change-Id: Ie6c659f6d8e8b3eeaf2453f0cba6189d56f86581
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
The text edit that shows which flags we have set should be updated in
PreviewWindow::setWindowFlags() and PreviewWidget::setWindowFlags()
but QWidget::setWindowFlags() isn't virtual so only the base class
one was called.
Change-Id: I5c9d47d003d5701dde1ab63df0d349f641d66f44
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
The layout for an invalid block is very likely to be null, it
shouldn't be accessed without checking the block's validity first.
We can make the check a bit more conservative and simply check that
the block isn't empty.
Change-Id: Ic1459a6168b1b8ce36e9c6d019dc28653676efbe
Task-number: QTBUG-43562
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
The QPageSize-based refactoring led to casting DevicePixel to a QPageSize::Unit
value of 6 (out of bounds). And then the switch in qt_nameForCustomSize
would leave the string empty, leading to "QString::arg: Argument missing: , 672"
warnings.
Change-Id: I85e97174cc8ead9beccaaa3ded6edfad80f8e360
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Selftests for testlib fail when executed in UTC timezone because local and
UTC are the same, but expected to be different. A custom timezone is used
instead.
Debug output of qCompare does only handle local and non-local timezones, using
new Qt5 features allows to show the correct timezone in format string.
Change-Id: I753884a12370952b7b62a90d62896db4f2d3d1b4
Reviewed-by: Jason McDonald <macadder1@gmail.com>
...using qHashRangeCommutative(). Also add a test.
[ChangeLog][QtCore][QSet] Can now be used as the key in QSet, QHash.
Change-Id: Ie7c81d257a3b324fc03d394fa7c9fcf0c6fb062a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add possibility to get length and other information of EC based
certificates. Also it is possible to parse those public/private
keys from PEM and DER encoded files.
Based on patch by Remco Bloemen
[ChangeLog][QtNetwork][SSL/TLS support] It is now possible to
parse elliptic curve certificates.
Change-Id: I4b11f726296aecda89c3cbd195d7c817ae6fc47b
Task-number: QTBUG-18972
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
tst_collections.cpp
tst_collections.cpp(3138) : warning C4305: 'argument' : truncation from 'size_t' to 'bool'
tst_collections.cpp(3190) : see reference to function template instantiation 'void testContainerTypedefs<QVector<int>>(Container)' being compiled
with[Container=QVector<int>]
(repeated)
tst_qringbuffer.cpp(297) : warning C4267: 'argument' : conversion from 'size_t' to 'int', possible loss of data
tst_qringbuffer.cpp(300) : warning C4309: '=' : truncation of constant value
tst_qringbuffer.cpp(306) : warning C4267: 'argument' : conversion from 'size_t' to 'int', possible loss of data
tst_qrawfont.cpp(947) : warning C4309: 'argument' : truncation of constant value
tst_qsslsocket_onDemandCertificates_member.cpp(217) : warning C4189: 'rootCertLoadingAllowed' : local variable is initialized but not referenced
Change-Id: I6143d4ad121088a0d5bdd6dd2637eb3641a26096
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Makes it easier to add new tests.
Change-Id: I5c2bca60e125259eac83a03860e60ca85b51db24
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
This is in preparation of adding more tests.
It makes the test run longer, because of the additional book-keeping,
but if something goes wrong, it can pinpoint the circumstances better.
Change-Id: I4be68fcfbffe48e8609b722ea551b1f7c36790a9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
We tested button's AXDescription, which is however used only for
non-textual buttons (e.g. buttons with an icon and without a visible
text). On the other hand, button's visible text (which is our case) is
exposed in AXTitle (and not in AXDescription).
Change-Id: Ie89c758cf94b72ade3a440561c5f3df61a4c4612
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
bec1854cc0 introduced a regression:
when sorting a tree model, children items would not follow the sorted
parents any more (they wouldn't be remapped correctly), resulting
in crashes.
So, the fix needs more reasoning; let's revert the fix,
but leave the original test around for any subsequent attempt, and
introduce a new test which looks for the right behavior when
sorting trees.
This commit partially reverts bec1854cc0.
Task-number: QTBUG-43827
Change-Id: Ic83ac53aef639f870f6c36a8b4b2992f5b485b13
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Volker Krause <volker.krause@kdab.com>
1) everyone forgets to do so (proof: tst_qnetworkaccessmanager_and_qprogressdialog.cpp
forgot too, which led to a valgrind warning, the elapsed timer was never started)
2) setValue(0) makes no sense if the progress dialog goes from 50 to 60,
or any other non-zero minimum value.
Fixed by starting the timer in the constructor (most code doesn't reuse
progress dialogs, so this fixes the most common case), and by also starting
the timer when calling setValue(minimum()) for well-behaved dialogs.
setValue(0) special case kept for compatibility.
Task-number: QTBUG-17427
Task-number: QTBUG-25316
[ChangeLog][Important Behavior Changes][QProgressDialog] The timer for estimating
the duration of the progress dialog is now started in the constructor and in
setValue(minimum()), as well as when calling setValue(0), as previously documented.
Done-with: Marc Mutz <marc.mutz@kdab.com>
Change-Id: Ia8f7fc677438749191b99074fc334eab652ea36f
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Output the current active/modal/popup windows when receiving
FocusAboutToChange or FocusIn events.
Task-number: QTBUG-42731
Change-Id: Ia88e9a9b41f7c80fb7a2a048b06da56d989ff18a
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Until now, QSqlQuery::execBatch did not call resetBindCount, which lead
the next call to QSqlQuery::addBindValue to start at non zero index.
This is problematic in case of a prepared query which is called several
times.
Task-number: QTBUG-43874
Change-Id: I1a0f46e39b74d9538009967fd98a269e05aac6f2
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
The OpenGL windows should have some more obvious
transparent areas in them.
Change-Id: I7d000cd367208f99a79b11c341bf94062613f357
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
This test requires test data to be available and the
testRetainSizeWhenHidden test assumes that a widget will be
sized based on its sizeHint(), which does not work on
platforms where show() implies showMaximized().
Change-Id: I9bf372d8c0ea94845ae08481ec555fe25dcfebc0
Reviewed-by: BogDan Vatra <bogdan@kde.org>
This test needs to have a test environment available on the regular
file system, so we create this when initializing the test. In
addition we QEXPECT_FAIL one of the tests which seems to expose
a legitimate bug. A bug report has been created for this.
Change-Id: I7c90aea78a067815cb647a51db5d91a652a9fc1c
Reviewed-by: BogDan Vatra <bogdan@kde.org>
On Android, the HOME and TMPDIR environment variables both point
to the application sandbox, whereas the QSideBar test assumed
they were different. We work around this simply by creating
a new directory and using this as the test dir in place of the
home directory.
Change-Id: I67e01926b901ddf237b05aff116d30b6c7885535
Reviewed-by: BogDan Vatra <bogdan@kde.org>
This requires building a command line tool and running it using
QProcess, which is not a supported deployment option on Android.
Change-Id: I795374bf809a8e4d8634a55f5ebf1699ee9745d1
Reviewed-by: Christian Stromme <christian.stromme@theqtcompany.com>
The auto-hinter in the FreeType version bundled in Qt gives
slightly different advances on some glyphs. As noted in
the removed code, this was already observed on Windows and QNX,
and recently also on Android.
I'm sure it could also happen on platforms using the system library
if the system library was the same version as the one bundled in Qt.
Instead of expect-failing the test, we simply accept both the
observed results as valid.
Note that we need to accept 9 as a result for the default hinting
preference on all platforms, not just Windows, since the default
hinting preference in FreeType can be a system setting.
Change-Id: I3cc0f33f0f66dd64419770b37c10dee457706b5e
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
The files for the test have to be included in a qrc to be available on
Android.
Most of the image files are already in a qrc, but a couple were missing.
We add this in a separate qrc to avoid interfering with the tests on
other platforms.
Change-Id: Ibb24f5015a1aba4d5622e14f7aae80bc18611ec4
Reviewed-by: BogDan Vatra <bogdan@kde.org>
The algorithm searches for all executables in search path starting with
"tst_". Tests are not named like the folder they are contained in
anymore.
Change-Id: I360f293e43e30292fe0ae6230fd3ec7abf3d632d
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
... in QCOMPAREs.
The implementation is hidden in a nested Internal namespace that retrieves
the strings without strdup()ing. That makes it easier to compose these
functions as there is no need to delete character arrays when using them.
The public interface (which qstrdup()s) is implemented on top of these.
[ChangeLog][QtTest] QCOMPARE now pretty-prints QSizePolicy{,::Policy,::ControlType{,s}}.
Change-Id: Ib03d969847e5a12474c71a7921366b400025f680
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This reduces a bit of string duplication by relying on the constants
defined in qglobal.cpp and detection via uname(2), in addition to adding
the Linux distribution name as a selector.
Change-Id: I64a46a0fc552c399db787125b1b32aae5c50056f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Alan Alpert <aalpert@blackberry.com>
isnan is C99 and POSIX.1, which the older MSVC do not support. Use the
Qt equivalent.
Change-Id: Ic5d393bfd36e48a193fcffff13b8679cb83d12db
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
When changing models it makes no sense to keep the old root model index,
pointing into a possibly deleted model. Reset it to the root
of the new model is the best line of action.
[ChangeLog][QtWidgets][QComboBox] QComboBox will now reset its root
model index when a new model is set on it.
Task-number: QTBUG-43350
Change-Id: I113d558ce19fcaed31f13abfbedc7a24302e28d7
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
In replacement for Q_ENUMS and Q_FLAGS.
Q_ENUM(Foo) has to be put after the declaration of Foo in an object.
It will tell moc to include the enum in the meta object (just like
Q_ENUMS) and will allow templated code to get the metaobject for
that enum.
Will be used by QDebug and QMetaType
Change-Id: Iefaf8ae07dc0359828102bf384809346629b3e23
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
If the user has some objects selected and holds down the "extend selection"
key (Control on Windows, Command on Mac OS X), clicking and dragging a
rubber band selection deselects the current selection. This is
counter-intuitive and confusing for users.
This commit fixes the behavior so users can extend selections using the
rubber band when the proper key is held down.
Task-number: QTBUG-6523
Change-Id: Ieda4aaa50adb351c0405f5cb8aae23332eec58a9
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
The call was invalid from C99 perspective.
Change-Id: Ie07310735736eddf5eb0e142297e56164fde7fe4
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
This avoids having to define operator< for types where operator== is
required but operator< doesn't make any sense (e.g. QGeoCoordinate).
Change-Id: I81f6a9d8fc0009a4514c974b5e02b446c50d1e31
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Commit 96995db4af implements the necessary bits for this to work
under QNX.
Change-Id: Ie9e2f421f4f27fcaf40697dd363e9ed047754f0d
Reviewed-by: Tobias Koenig <tobias.koenig@kdab.com>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Contrarily to Q_OBJECTs, Q_GADGETs are not guaranteed to
descend from a Q_GADGET. Here, we ensure that if the first
superclass is a Q_GADGET, then the derived class will be
treated as one. This allows gaps in the Q_GADGET hierarchy
while preventing from trying to link to the inexistent
staticMetaObject if there's no such ancestor.
Change-Id: If10fb952e23655102a425bb18fe8babaf447a47f
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Wheel events should not cause a popup widget parented on a scrollable
widget to be closed or moved to correctly reflect the system behavior
on OS X and Windows.
Task-number: QTBUG-42731
Task-number: QTBUG-40656
Change-Id: I4ef75aa8331390309c251316ac76db2cf9ec51f7
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Some of these tests are verifying things that are not supported
on Android, so we XFAIL these cases when we see the appropriate
error message.
Change-Id: I8245266f061c902515bb12251521159a8e19bfb7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QLatin1String are actually Unicode, so print them with \uXXXX sequences.
QByteArray are binary (arbitrary), so print as hex. Since hex escape
sequences in C are not limited in length (\x00000F is a valid hex
sequence), we need to insert "" if the next character is a valid hex
digit.
[ChangeLog][QtCore][QDebug] Similarly, printing of QByteArrays whenever
"noquote" is not active now prints the arrays in a format consumable in
C++, with all non-printable characters printed in hex escape sequences.
Change-Id: Ibd0c1a97cbac98610c65c1091bfbcf5581c835db
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
[ChangeLog][QtCore][QDebug] Printing of QStrings and QStringRefs
whenever "noquote" is not active now prints the strings in a format that
can be copied back to C++ code. All characters that aren't printable in
US-ASCII are escaped (this includes printable Unicode characters outside
of US-ASCII). Pretty-printing will not respect QTextFormat padding or
field widths.
Change-Id: I169a8a0508e24693f5652f0129defe7f709e5d08
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Two serious mistakes:
- we need to call dbus_server_free_data_slot as many times as we call
dbus_server_allocate_data_slot
- we need to delete the d pointer...
The changes to the unit tests are simply to cause the used peer
connections to be removed so they don't show up in valgrind.
Change-Id: I9fd1ada5503db9ba481806c09116874ee81f450d
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
The window size was too small on high-DPI screens.
Save the default text color instead of setting it to black.
Change-Id: I78b50624110be0cb1d077d3782d421eb323f4fb0
Reviewed-by: Paul Olav Tvete <paul.tvete@theqtcompany.com>
On e.g. Android, the tabs will be scaled by DPI. This breaks the
logic in the QTextLayout tests for tabs. It's not possible to
just scale the expected sizes either, since the whole text layout
will be affected by font sizes and scaling, and it's difficult to
predict where characters will land on different platforms and
resolutions.
To avoid breaking this test on other platforms, we just skip them
when we know they will break. Since the code tested is
cross-platform, this will hopefully not have any significant
impact on our coverage.
Change-Id: I65d6c33c9c6724665983a17f99eadcf1baedcc20
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@digia.com>
Reviewed-by: BogDan Vatra <bogdan@kde.org>
Include test data on Android.
Change-Id: Ic0890495c0bf8d2e38595585226a03073b043d57
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@digia.com>
Reviewed-by: BogDan Vatra <bogdan@kde.org>
Add an 'info' message type that can be used for messages that are neither
warnings (QtWarningMsg), nor for debugging only (QtDebugMsg). This is
useful mainly for applications that do not have to adhere to the
'do not print anything by default' paradigm that we have for
the Qt libraries itself.
[ChangeLog][QtCore][Logging] QtInfoMsg got added as a new QtMsgType.
Use the new qInfo(), qCInfo() macros to log to it.
Change-Id: I810995d63de46c41a9a99a34d37c0d417fa87a05
Reviewed-by: Jason McDonald <macadder1@gmail.com>
ConfigLocation was erroneously inconsistent, by adding the org name
and app name on Windows (unintentionally) and not on Unix (while having
subdirs in ~/.config is actually common practice for some XDG desktops)
Therefore this adds AppConfigLocation, which always has the org name
and app name (while GenericConfigLocation never does).
[ChangeLog][QtCore][QStandardPaths] Added QStandardPaths::AppConfigLocation,
for application-specific configuration directory. ConfigLocation was inconsistent.
Task-number: QTBUG-38872
Task-number: QTBUG-38845
Change-Id: I80fb98f296436261f3996c9df87571c29b06ab35
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
qHashRange() takes an (input iterator) range and hashes each element, combining
the hash values using the hash combiner from Boost/N1837 with the magic number
0x9e3779b9, as described here:
http://stackoverflow.com/questions/4948780/magic-number-in-boosthash-combine
qHashRangeCommutative() does the same but with a cummutative combiner (unsigned
addition) to create hash values that are order-independent, e.g. for hashed
containers. The obvious combiner, XOR, is a bad one because it eliminates
duplicate elements. Signed addition cannot be used, since signed overflow
leads to undefined behavior.
[ChangeLog][QtCore] Added qHashRange() and qHashRangeCommutative() functions to aid
implementing qHash() overloads for custom types.
Change-Id: I3c2bbc9ce4bd0455262a70e0cf248486525e534f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This patch is a forward-port from 4.8 branch
(d869e1ad4b0007757e97046609de2097cd9e9c5d).
Change-Id: I6ae36a5417d1176fbecf775668f6033b1cb22a94
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add all test data to resources.
Change-Id: I31b0dbb7546a15151f64523c86bf8eb687ff9ec0
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
We must add all test data to resources.
Change-Id: I1b18415cd53a27bd23e51ac6b738d3ed94162ac9
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
This adds the testdata to a qrc to make them available on Android.
There are still some failures which might be actual errors, and which
will be addressed separately.
Change-Id: I1bdcfb2c6676134ca52388d49a1b2d25cf2813f9
Reviewed-by: BogDan Vatra <bogdan@kde.org>
QWidget is polished when show() is called, so unless you do this
first, QWidget::font() will return a default constructed QFont,
and not necessarily the default specified in the platform theme.
Comparing this to QPainter::font() later, which has been resolved
against the platform theme font, and not the default constructed
font, you can get a mismatch and a false test failure. This
happened on Android.
Change-Id: I41ef5b10879bbd4bb8ef8d52ecaccf5e8e894075
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Fixed a few instances of files that should be deployed to the
file system. The way we do this on Android is via qrc. We also
need a special case for the resources/test.txt, because
QFINDTESTDATA will find this in qrc, but that's not the one
we are looking for.
Change-Id: I7097e8b7795b3a8fd483adad090208f295478412
Reviewed-by: BogDan Vatra <bogdan@kde.org>
The testdata needs to be in a qrc to be available on Android.
Note that a single test will still fail. Since this requires
a platform-independent fix, it will be committed separately.
Change-Id: Ib2438a3298d81d77b7f4f240ef045aa0500d8382
Reviewed-by: BogDan Vatra <bogdan@kde.org>
We must add all test data to resources. Write output data into a writable location.
Change-Id: I5a1c212f6108abf2a82288a2c84cfb31eda5e101
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
QVersionNumber will gain a small-version-number optimization, which
stores sequences of less than 4 (32bit) or 8 (64bit) 8-bit signed
segments inside the class instead of a QVector. Make sure the tests
cover those cases, too.
Change-Id: If1d875c75d284908756b305f767a7218cab5226f
Reviewed-by: Keith Gardner <kreios4004@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
%{threadid} should have been %{qthreadptr} but we forgot to make the
change for Qt 5.4. So do it now.
[ChangeLog][QtCore][Logging framework] %{threadid} now prints the real
thread ID. On Linux, OS X, iOS, FreeBSD and Windows, the value is unique
system-wide. On other systems, it will print something that may be
process-specific (the value of pthread_self(3)). To print the pointer
to QThread::current(), use %{qthreadptr}.
Change-Id: Ie383ff864a11966cf5d095b966a30ace65d34ee6
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
The change 35bc3dc45a moved some padding out
of QTextureGlyphCache into the font engines directly, however this was not
done for the DirectWrite font engine so it caused a buffer overrun.
Task-number: QTBUG-41782
Change-Id: I4e643159036f06c5edd8a742dc6694d517a47826
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
... which is the module-wide include, bringing in the entire QtCore.
Change-Id: I5cd872efa4562917fc4e3850809cb7595710c43a
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
This has been deprecated since QDBusContext was introduced (Qt 4.3). So
it's time to remove the functionality.
[ChangeLog][Important Behavior Change] QDBusConnection::sender()
(deprecated since Qt 4.3) has changed to always return an invalid
QDBusConnection. To know what connection the incoming call was received
from, use QDBusContext.
Change-Id: I355efb82c14e54ed718c8f892d8267e727b19118
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
There's a change in Qt 5.4.0 that makes Qt compile with its own set of
D-Bus headers, which means QT_CFLAGS_DBUS may be empty. Thus, we can't
compile or link if we're using the actual libdbus-1 API to build the
test.
This commit makes these unit tests use the same dynamic loading
mechanism.
Change-Id: I56b2a7320086ef88793f6552cb54ca6224010451
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
The error of "Not connected".
This incidentally solves a crash when QDBusServer().lastError() is
called but libdbus-1 couldn't be found.
Change-Id: Id93f447d00c0aa6660d4528c4bbce5998d9186a8
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
On the unit test side, everything is sequential: we first ask for the
connection, verify that it is connected, then ask the remote side via
the session bus if it is connected. Unfortunately, the remote site may
handle things in a different order: it may handle the incoming function
call to "isConnected" before doing accept(2) on the listening socket.
So, instead, make the local side block until the connection is received
on the other side. On the remote, we don't block, instead we use the
feature of delayed replies.
Change-Id: Ie386938b8b39dd94a9d7e5913668125fb4a3c7da
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
Skip the tests that require building and deploying an external
command line application, since that's not how we do things on
Android, and it's really not very relevant for that platform.
Change-Id: I2c1985687e25fb0cf124b1d57c8ba60e37d2ff96
Reviewed-by: BogDan Vatra <bogdan@kde.org>
On Android the POSIX implementation of QCollator is used, and
this does not support setting other locales than the default.
Change-Id: I25d23949341fc555e8be4f6836ae68cc8813cc46
Reviewed-by: BogDan Vatra <bogdan@kde.org>
Include test data in qrc so it can be found on Android.
Change-Id: Iaca8422120f1ef842aafeb0cc209cb9fdd70f05f
Reviewed-by: BogDan Vatra <bogdan@kde.org>
Bundle test data in qrc on Android. Extract it, as the tests
expect to find it in the file system.
Change-Id: I251eca3c23141a608b1cbac5ee0b7164c068f9b4
Reviewed-by: BogDan Vatra <bogdan@kde.org>
The failures will be printed in red color.
Use -f param to stop on fail.
Change-Id: Ife58f9264a9ac859d739842c6d1359acde807ce7
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
The orientation is unsigned short, read it as such. In
JPEG-files created by Ricoh/Pentax cameras, the data is saved in
Motorola format. Reading the wrong data size will produce invalid
values when converting the byte order.
Change-Id: I8f7c5dc5bfc10c02e090d3654aaefa047229a962
Task-number: QTBUG-43563
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
QFileSystemWatcher does not signal directoryChanged() when files are
modified in a watched directory. QTBUG-8945 was closed with the
decision that it should not signal. Updating the docs and tests to
reflect this fact.
The test code that is being changed is a partial revert of Qt4 commit
1428cc6d71a65c1ac7123c9c4cc3cfaf225cceed. It appears that Symbian
supported directoryChanged() on modification, hence why the check
was for 0 or 1.
Change-Id: I04320c68f227ca338ce65e525956ee201fd50699
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Robin Burchell <robin.burchell@viroteck.net>
This is in preparation of adding more qHash()-related tests.
Change-Id: Iae65bf8b123e1d6ac6d1eb34d74ba4eb9df8173c
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Under DBus it is possible to have methods and signals with the same name
or have methods which are reserved c++ keywords.
For example the logind session interface has a signal and method both
called Lock.
This patch allows generated methods to use a different method name
specified in the annotation that the original DBus name in the DBus
interface in a similar manner to how one can rename accessors.
[ChangeLog][QtDBus] Add annotation org.qtproject.QtDBus.MethodName to allow
autogenerating C++ methods with different names to the original DBus method
Change-Id: I08bbe77554fbdd348e93f82d45bab0d75d360c27
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Linux gracefully allows us to do that and treat the v6 socket as if it
were v4. Other OS (notably OS X) aren't so forgiving.
Change-Id: I13dd3274be2a4b13e8b1eef93cbc2dd17b648f96
Reviewed-by: Richard J. Moore <rich@kde.org>
We already let enter/return key presses to reach text edits instead
of closing the editor. Do the same for tab/backtabs.
[ChangeLog][QtWidgets][Important behavior changes] QItemDelegate will
now not close a QTextEdit/QPlainTextEdit editor when the tab key
is pressed; instead, the key will reach the editor.
Task-number: QTBUG-3305
Change-Id: Ife9e6fdc5678535c596d1068770b0963134d8d5a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Thorbjørn Lindeijer <bjorn@lindeijer.nl>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
Instead of leaking the QLockFile instance, which causes
leak-checkers to emit false positives, simply call exit(),
which doesn't run the destructors, yet doesn't lead to
leak-checker warnings.
Change-Id: Ia61010671e5218ae412e2bcf873e66255a2c5a99
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
So we can get the output when running with QDBUS_DEBUG=1.
Change-Id: I6a6b8e0d82727c522914fb90a7ce594c86307d8f
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Instead of killing them outright (and note that terminate() doesn't work
on Windows), ask them nicely to exit on their own. This way, if we run
them in valgrind, valgrind gets a chance to print the leak check output
and summary.
Change-Id: Ib6cc8d4560ff0bf255f94980eb220e97592c00f0
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
The ROUND function for PostgreSQL only accept NUMERIC field as argument
Change-Id: I0c3753bfe4167cd47158e21b407cca8771816104
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
Added support on QDateTime::fromString to read correctly dates on ISO
format with Time zone designators at format [+-]HH
Change-Id: Ied5c3b7950aee3d0879af0e05398081395c18df5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
This patch adds correct timezone support in PSQL plugin. Prior to this
patch, no timezone support was provided, so only the following case
worked :
* using local time in both client application and postgresql server
* datetime were using second precision
This patch tries to take care that postgresql has two different
datatypes for date time, respectively :
* timestamp with time zone
* timestamp without time zone
Both are internally stored as UTC values, but are not parsed the same.
* timestamp with time zone assumes that there is a time zone
information and will parse date time accordingly, and then, convert
into UTC before storing them
* timestamp without time zone assumes that there is no time zone
information and will silently ignore any, unless the datetime is
explicitly specified as having a time zone, in case it will convert
it into UTC before storing it
Both are retrieved as local time values, with the following difference
* timestamp with time zone includes the timezone information
(2014-02-12 10:20:12+0100 for example)
* timestamp without time zone does not include it
The patch does the following :
* parse the date retrieved by postgresql server using QDateTime
functions, which work correctly
* always convert the date to UTC before giving it to postgresql
* force time zone so that timezone information is taken into account
by postgresql
* also adds the milliseconds when storing QDateTime values
The following configurations are tested to work :
* client and server using same timezone, timestamp with or without tz
* client and server using different timezone, timestamp with tz
The following configuration will *not* work :
* client and server using different timezones, timestamp without tz
Because data will be converted to local time by the postgresql server,
so when returned it will be different from what had been serialized.
Prior to this patch, it gave the illusion to work because since TZ
information was lost, time was stored as local time from postgresql.
Lots of inconsistencies occurred, though, in case client tz changes...
I don't expect this to be an issue since having different TZ in server
and client and *not* handling this is a broken setup anyway.
Almost based on changes proposed by julien.blanc@nmc-company.fr
[ChangeLog][QtSql] Added timezone support for datetime fields in PSQL
Task-number: QTBUG-36211
Change-Id: I5650a5ef60cb3f14f0ab619825612831c7e90c12
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
This covers the only real additions over QVector: push and pop. Really, there
isn't too much specific to benchmark here, but we're interested in one specific
case: that of pushing and popping a single item repeatedly.
With the current QVector behavior, this causes constant deallocation, which
makes it morbidly slow. This behavior will be reviewed in a subsequent commit.
Results (not that anyone really cares) for me:
PASS : tst_QStack::qstack_push()
RESULT : tst_QStack::qstack_push():
1.9 msecs per iteration (total: 61, iterations: 32)
PASS : tst_QStack::qstack_pop()
RESULT : tst_QStack::qstack_pop():
8.2 msecs per iteration (total: 66, iterations: 8)
PASS : tst_QStack::qstack_pushpopone()
RESULT : tst_QStack::qstack_pushpopone():
80 msecs per iteration (total: 80, iterations: 1)
Change-Id: I3530888abbfcfcef39318d6be6d5b07306a4704e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The interface macro needs to be in the Qt namespace, otherwise the
template specialization in Q_DECLARE_INTERFACE fails.
Task-number: QTBUG-41959
Change-Id: I818da5ba8460219d73c0d248ee410ac92f7498f4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@digia.com>
Reviewed-by: Stephen Kelly <steveire@gmail.com>
We want to use "localhost" if the server's address is "any", as some OS
can't send datagrams to "any" (e.g., OS X and FreeBSD).
Change-Id: I1004bc2282e7f930cdb7ed394aa9f4b5a1cfcf82
Reviewed-by: Richard J. Moore <rich@kde.org>
On my Mac Mini, port 5000 is in use, which means the broadcasting test
fails.
Change-Id: Ifb0883263e277f388342430349ea7315d42f324a
Reviewed-by: Richard J. Moore <rich@kde.org>
It was unconditional. Someone forgot to check for IPv6 support before
skipping IPv6 tests.
Change-Id: I7b11528ad02560f0db9defde3c64f76f48a6c1f8
Reviewed-by: Richard J. Moore <rich@kde.org>
Fix indention, add empty line as separator, undef a local macro.
Change-Id: Ie0d8529322f87ca2bdedb9a7f2f4cf9f463a6e12
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Split off default-value check from getSetCheck().
This is in preparation of extracting getSetCheck_data().
Change-Id: I869c34014a92e29a07dc08584a93a4cbba372518
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
QUdpSocket doesn't support binding to QHostAddress::Any and then joining
an IPv4 multicat group since QHostAddress::Any is really an IPv6 socket
with v6only = false. The test did check this case, but failed to ignore
the warning.
Change-Id: I62d782408319a6e566e0ff1a6081b706ac1f669c
Reviewed-by: Richard J. Moore <rich@kde.org>
With IPv6, you cannot bind to a multicast address. You need to bind to a
local address only. The previous tests either checked this or didn't
check the result of bind().
Change-Id: Ief70887d8988fc1bc4394cf6ff34b5d560e5748e
Reviewed-by: Richard J. Moore <rich@kde.org>
[ChangeLog][QtCore][QThreadPool] Added QThreadPool::cancel() which allows
removing from the job queue a job that hasn't been started yet.
Change-Id: Ib8f1c1f32a34f5eec8338c641d820b928e470164
Reviewed-by: Nick Shaforostoff <shafff@ukr.net>
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Sending 100*8 packets of each type of message is WAY overkill. That's a
stress test without limiting. My Linux system starts reporting EAGAIN on
the socket, so reduce the amount of data sent.
Change-Id: I153f44cf3b91d37526dac580b400114cc80b1769
Reviewed-by: Richard J. Moore <rich@kde.org>
IPv6 has no such thing, so don't try to bind to an IPv6 address to send
broadcasts (even though that works) and it's a poor idea to bind to IPv6
to receive broadcasts. Moreover, skip any IPv6 network addresses
(broadcast() is invalid).
Change-Id: I2829b042c000158565adfd92db682f37d67dacae
Reviewed-by: Richard J. Moore <rich@kde.org>
If you don't have /etc/lsb-release, you'd get
sh: line 0: [: =: unary operator expected
Change-Id: Idb5c79f799879e4d32cd640ef74fb388227f831e
Reviewed-by: Richard J. Moore <rich@kde.org>
It doesn't make sense because there is no command to ask the proxy
server to join a multicast group. At best, we could write a datagram via
proxy without joining, but we definitely can't receive.
Change-Id: Icc6b54572a053fb7821dfca1f4111f2046ff8686
Reviewed-by: Richard J. Moore <rich@kde.org>
Behavior will agree with the docs.
[ChangeLog][QtGui][QWindow] lastWindowClosed will be emitted even if
quitOnLastWindowClosed is not set
Task-number: QTBUG-32956
Change-Id: I7bb269d53894859fee27e171eea7ad472ea86af0
Reviewed-by: Jørgen Lind <jorgen.lind@theqtcompany.com>
This is a temporary measure while the Qt CI system is updated to have
the correct D-Bus configuration. Once it is fixed, this commit should be
reverted, so that we don't run into the situation in which the tests
aren't getting run on some configurations and we never know about it.
Change-Id: I7192d4d95a60dcb63acfa6cc90bfdc58592b0664
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
The /home path doesn't exist on Android, so it doesn't work as
a non-writable current dir. Instead we use /data on Android.
Change-Id: Ib779f60822da1bef421a16a00c1030245a8c5b90
Reviewed-by: BogDan Vatra <bogdan@kde.org>
The qtlogging.ini file needs to be detectable by QFINDTESTDATA,
so we put it in a qrc file on Android.
Change-Id: I5fb0217098c56f2b2e99ab8d1642c4a7904b18d1
Reviewed-by: BogDan Vatra <bogdan@kde.org>
This test requires building a console application first, deploying
this as part of the APK and then being able to execute the
bundled file from the main application. Since IPC is a limited
use case on Android, we just skip this test instead.
Change-Id: Ie68e495ff64b69e7027924291a411b5de0e2da76
Reviewed-by: BogDan Vatra <bogdan@kde.org>
Test requires that tst_qiodevice.cpp is available on file system,
but since we're not able to deploy directly to the file system
on Android and since we want to actually test file system access,
we bundle it in qrc and copy it out during initialization.
Change-Id: Ida2b5bf6f1dcd43bc740a2b9380352bab5eb6c62
Reviewed-by: BogDan Vatra <bogdan@kde.org>
Some of the tests expect QDir::homePath() and QDir::currentPath()
to be different, so we just set the current path to something
other than QDir::homePath().
Change-Id: Ib048d323f4745369821765230b995a73b8a97145
Reviewed-by: BogDan Vatra <bogdan@kde.org>
This test may not be possible on Android, since the file system
can be mounted with noatime or relatime which means read access
will not be registered.
Change-Id: I40f587e1a1f131ee06f0e3700e908ccaa19c83ce
Reviewed-by: BogDan Vatra <bogdan@kde.org>
Since there's no way to deploy files directly to the file file
system on Android, we put them in a qrc file and extract them
on startup.
Change-Id: I6a42aa5e0372bfd9fb2f7ccfea964c9c3c2e45d8
Reviewed-by: BogDan Vatra <bogdan@kde.org>
This test requires that the resources are also available
in the file system. Since it's not possible to deploy directly
to the file system using Android, we extract the files on
startup instead.
Change-Id: I1d1fe7d62c4c618a89713e3a7d1903e42bfb10b8
Reviewed-by: BogDan Vatra <bogdan@kde.org>
There's no way to install files automatically into the file
system on Android, so to test QDir on the file system, we have
to bundle the files in qrc and then copy them into the file system
on startup. This adds some complexity, but at least it will detect
regressions.
We also need to make sure the current directory is the same as
the data path, since the test assumes this, and /usr/ does not
exist on Android, so we have to use a different path to find the
root path.
Change-Id: I18d79b5ed99a0afff573beb30c61745c403f8991
Reviewed-by: BogDan Vatra <bogdan@kde.org>
This will arbitrarily fail at certain points. Adjusting the
timeouts helps, but it's very unpredictable, so it's better
to do what we do on Windows and just expect-fail the results
that we get.
Change-Id: Ie6033c73539c2dd69115b06096919e173f097367
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: BogDan Vatra <bogdan@kde.org>
Add all test data to resources.
Change-Id: Id42a4c033b75409f65cb4d56ebf1161336b93832
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
We must add all test data to resources.
Change-Id: Ic12f8fce9afb965aff32e7141516c8d223e64491
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
We must add all test data to resources.
Change-Id: I7f9e7650156b174b7c16270d86b78e9408dff254
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Add test data to resources.
Change-Id: Ib8a5688e7caab8434b8f0676f53a2a79ec94b264
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
Wait for the subprocess to print "ready" before assuming that it is
ready to receive calls. waitForStarted() will return as soon as the
child is running, but it may not have registered on D-Bus yet.
This also solves the synchronization problem more elegantly than how
tst_qdbusmarshall.cpp was trying to do it.
Change-Id: I548dfba2677cc5a34ba50f4310c4d5baa98093b2
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
The executables are not in the same dir as on Unix, so we need to use
QFINDTESTDATA to find them. The DESTDIR setting prevents qmake from
placing the executables in a "debug/" subdir.
Change-Id: I1d6d10e6f6f109f55fd9809dcf83da0386f38772
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Rohan was right in e88f9a92b7 to stabilize
the test and reset the state, but killing the subprocess is overkill.
All we need is to reset the state in both applications, which includes
disconnecting and reconnecting to the peer, to discard any sent but not
yet received messages.
Change-Id: Ie01392e6e63bd70ef8345217d3fc641ed63c7aba
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
QDBusServer::address() will return an empty QString, which caused the
tests to fail later with no apparent reason.
Change-Id: I86f448dfc67a6cdb27ecda2d490f335766cfaf4f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
This allows the tests to be run on Windows too by using TCP socket
connections instead of requiring Unix sockets. The tests shouldn't have
hardcoded the path, which came from QDBusServer anyway. Now the tests
simply defer to QDBusServer.
This is a slight behavior change for Windows, but not one that should
matter since anyone who was using the default constructor resulted in a
QDBusServer that failed to listen.
[ChangeLog][QtDBus][QDBusServer] Fixed a bug that made QDBusServer's
default constructor try to bind to a Unix socket on non-Unix systems.
Now QDBusServer will attempt to bind to a TCP socket instead.
Change-Id: I2a126019671c2d90257e739ed3aff7938d1fe946
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
No need to loop twice to add the "native" entries, since they are added
by the helper function anyway.
Change-Id: I9caabc6fc4973a90b483840815769b1351947a89
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Basically, introduce a small check for this corner-case situation.
Setting a model doesn't just store a pointer, but also resets the current
index, changes the line edit completion model, and so on, and seems silly
to trigger changes in such cases.
[ChangeLog][QtWidgets][QComboBox] A QComboBox does not reset itself any
more when setting the same model more than once.
Change-Id: If028b36cdfaa5552c156dd900e123ca9a04d4e3d
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Added the function pointer to addTransition to take
advantage of the new connect syntax.
[ChangeLog][QtCore][State Machine] Added an addTransition() overload that
takes a pointer-to-member for the signal triggering the transition.
Change-Id: Ic97f7983839217ca0c8484b269d38221cbe804e3
Task-number: QTBUG-40293
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
