The $$path may already be absolute, so prepending a slash may
result in //usr/lib, for example.
Task-number: QTBUG-32570
Change-Id: If7a4f6fbec0216404cfe48c1da62d21d75b3e272
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
because of popular confusion.
the packaging scripts now need to use -no-compile-examples explicitly.
Task-number: QTBUG-32449
Change-Id: Iecab1f345afe21e540204fe69a2292ef932cbb61
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
... as that causes debug+release installs to overwrite each other's
postprocessed files.
introduces CONFIG+=sliced_bundle, which instructs qmake to create
file-by-file install commands. we don't know whether people are not
putting files outside qmake's knowledge into the bundle build dir, so
this mode is not necessarily backwards-compatible, and thus off by
default.
Task-number: QTBUG-28336
Change-Id: I23e90985ccd3311f0237ed61aadca6d7ed8325b7
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
by convention, $target.framework/$target links to
Versions/Current/$target, not Versions/$version/$target.
Versions/Current already links to $version.
so this adds one indirection, but is otherwise the same.
Change-Id: If3d1a3713712f4221ec31883977e50bce6f91764
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
this went unnoticed so far, because the mac qmakespecs don't define a
strip command to start with.
Change-Id: Iac3e7ffa6f400373552134a44b9713aaf5f44589
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
replace() doesn't detach if there is nothing to do.
Change-Id: I845b585c766f44a670ca3af1fc11ba03e7317622
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
qmake has the rather bizarre logic that QMAKE_LIBS* is escaped rather
early (instead of right before being written out the the Makefile).
consequently, we need to explicitly escape the paths from the prl files
as well.
Task-number: QTBUG-32326
Change-Id: Ieaf81113d3ca3cf5d8a1ef87c83c5721d6b473ee
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
escape backslashes before the quotes, as otherwise we'd escape the
backslashes we just used to escape the quotes.
Change-Id: I88e12c0c2cfc53e0ab8dce9807b06dfce6aa6e78
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
... as that is the CWD of the command (since b139e7e96e5c).
leave the resolution relative to $$PWD as a fallback with a warning.
Investigated-by: Harald Hvaal <hhvaal@cisco.com>
Task-number: QTBUG-19352
Change-Id: I75de9444a647cd9e6f509e3d8eb3382dc985e5ca
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Some packagers don't want to install the private headers.
Check the existence of private headers only if the 'Private' component
is specified when finding the package.
Task-number: QTBUG-32466
Change-Id: I1fdbfb25e8ce485cd051564b937f766b2733741a
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
XBell() just sends a Bell request to the X11 server. This can be done
equally well (and with less ifdefs) through xcb's xcb_bell().
Change-Id: If41d955aa97acfe9e0a8b9fce05c11ebc146ce8e
Signed-off-by: Uli Schlachter <psychon@znc.in>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Codecs registered by creating new QTextCodec instances should be listed
there.
Task-number: QTBUG-32500
Change-Id: I56c00e0d6bbfef55a6cbd571bcf9aa2cf333ef3a
Reviewed-by: David Faure <david.faure@kdab.com>
Hardcode our perf_event_open(2) function to simply return -1 and set
errno to ENOSYS. This will disable the functionality.
People compiling Qt with such old headers will probably carry quite a
bit of dead code in QtTest. They should upgrade.
Task-number: QTBUG-32507
Change-Id: I774b4a81bee5c3e2ddc75fa52520d123a6bebed9
Reviewed-by: Jason McDonald <macadder1@gmail.com>
Use "_" instead of "-" in variables so variable replacement works
properly.
Change-Id: I2b17dca8f2351bc0933c165017f3fbb9393b0514
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Currently tst_QEasingCurve::setCustomType() is always failing on CI
when ran on 32 bit 11.10 Ubuntu.
Task-number: QTBUG-32432
Change-Id: Iaf346c14985f14716692fe996714b7040fb70930
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
Scripts are available in internal mkdist repo.
Added license tags, updated licenses and copyrights/contacts
Change-Id: Ibc734275f3000987eaa4f5c57f19d4e1fda2c479
Reviewed-by: Sergio Ahumada <sergio.ahumada@digia.com>
The one in tst_QLocalSocket::writeToClientAndDisconnect just needed
proper ordering: that's what waitForDisconnect is for. At the same time,
we need to make sure we get the same message from all three
implementations of QLocalSocket::waitForDisconnect (and without the
useless space at the end).
Change-Id: I21364263cf908df022df814a6a39fcb5783e84e6
Reviewed-by: Shane Kearns <shane.kearns@accenture.com>
The rule for a new override is that it must still work if the old
implementation is called. The catch is that any class that derives from
QProcess and isn't recompiled will still have QIODevice::open in its
virtual table. That is equivalent to overriding open() and calling
QIODevice::open() (like the tests).
In Qt 5.0, QProcess::start() called QIODevice::open directly, not the
virtual open(), so there's no expectation that a user-overridden open()
be called. With that in mind, simply fix QProcess::start to not call the
virtual open at all.
Similarly with QLocalSocket, the calls to open were always non-virtual.
Task-number: QTBUG-32284
Change-Id: I88925f0ba08bc23c849658b54582744997e69a4c
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
This should have been done in the commit that introduced open
(953255abab), but was missing.
Change-Id: I1c2de4ad5fa42aa5b90646e7d4d7d1b1570a0f87
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
We need the same code for both the no-sdk and the sdk case for
the OpenSSL code, since this is not covered by a system library,
but by an external dependency in both cases.
Task-number: QTBUG-32130
Change-Id: I976835556fcb0e6c32cfb3da4dd585e45490061b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Commit 568f82fba3 was incomplete.
If drainOutputPipes detected some readyRead it wouldn't end the loop.
Task-number: QTBUG-32354
Change-Id: I4e594f1e148abe9ef36c047a55eee1b22fd5064b
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Set the instance name and class name of the application windows.
Task-number: QTBUG-29396
Change-Id: Ia1fb492ab169108c3779deb8964bb731b322dd89
Reviewed-by: Uli Schlachter <psychon@znc.in>
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
The CE fontengine only supports translations, scaled
Text would only work if its an isometric scale and would
require to create a new font from the old one. Rotations
and more aren't supported at all. The freetype fontengine
for CE supports this, so we give a warning that the font
might be rendered incorrect, but could render correct with
the freetype engine.
Task-number: QTBUG-32189
Change-Id: I3581c3fef8e4ee118c0038a6ccc237e66b583731
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Discovered while working on:
Task-number: QTBUG-32385
Change-Id: Id1ff31ea6a367983676125810b4f49629233d374
Reviewed-by: Andreas Holzammer <andreas.holzammer@kdab.com>
Reviewed-by: Frank Osterfeld <frank.osterfeld@kdab.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
Change-Id: I837eaef4fb114c20a75ffc188b49aa612f07f507
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Martin Smith <martin.smith@digia.com>
because if it is automatically restored it's out of the application's
control, so the user's interaction will be ignored. Change
I8ce3cd94f5ae81d7877a346743ca4e0e188baa02 did this for normal windows
by default, but the dialog helpers generate windows which aren't
affected by that.
Change-Id: I819d7ab4e51e90783d55cee0676dbc33b38c5b00
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
Currently, calling
QGraphicsScene::items(QPointF(0, 0), Qt::IntersectsItemBoundingRect) or
QGraphicsScene::items(QPointF(0, 0), Qt::ContainsItemBoundingRect)
will exclude items whose shape does not contain QPointF(0, 0). This is
because QGraphicsSceneIndexPointIntersector::intersect() also checks if
the point is contained within the shape, instead of just checking
if it is contained within the bounding rect.
Task-number: QTBUG-19036
Change-Id: Ie701af2a5694d40cf9b3c9c19adbb09a53a4e398
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Andreas Aardal Hanssen <andreas@hanssen.name>
Do not attempt to lookup the service owner on peer connections (it will
fail).
Make QDBusAbstractInterface::isValid() return a sensible result on peer
connections, instead of always returning false.
Task-number: QTBUG-32374
Change-Id: I1b02feaffb3b255188f8d63306f89f5034a32f22
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
flock isn't available but we use fcnlt already (which is the recommended
alternative on Solaris)
Change-Id: I718e59c4804950a26eeb610888e17ce666522dcc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Update documentation for the QAbstractItemModel::supportedDragActions()
(virtual since 5.0) and the obsoleted setter function.
Task-number: QTBUG-32410
Change-Id: I4f77601bca63e5f782ade1f577104500f541bbb1
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Geir Vattekar <geir.vattekar@digia.com>
For developer builds, there is no need to run the test a second time.
Change-Id: I3564874cb2e9d6cc243e25a89ecd7f89df23b0bd
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Task-number: QTBUG-32403
Change-Id: I709ca32ca5bc1a342593357735ef3911ef849eb9
Reviewed-by: Clinton Stimpson <clinton@elemtech.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
