ApplicationsLocation and DataLocation were returning only the local path,
rather than system paths + local path.
Change-Id: I653d14e5bbe1e08c5fa1ecd5a6106336d1cd0369
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This causes all sorts of problems, but is also blocking the introduction of new,
more detailed signals, because the backend never correctly identified the removal.
The object handle appears to be woken up before the directory is actually
deleted, thus causing QFileInfo::exists() to return true, and not doing the
removal dance. This behaviour isn't exactly documented (as far as I was able to
find out), but also seems to happen consistently, and Chromium also contains
a comment noting a similar issue.
Task-number: QTBUG-2331
Change-Id: Icfb6219b78e688852d7863a666a0ffc31bb4d573
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Use QTest::ignoreMessage() so that the warnings don't appear in the test
output and so that the test will fail if the warnings are not produced.
Change-Id: I418d78819fc9dbfd7da2a8b6c0a1ebfa967347e2
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Resource files are expected to be readable.
Change-Id: Ife2b624e69b58e2fb996bc3e210a6e6c5c6852fe
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
For the readonly case (e.g. progress dialogs), where local file paths
look much nicer to end users than file:/// URLs.
Change-Id: I899fed27cfb73ebf565389cfd489d2d2fcbeac7c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
The latest windows run of CI has QSettings test passing, so remove the
CONFIG += insignificant_test from it.
Task-number: QTBUG-24145
Change-Id: I35c0d8d4f72ad49f9f21dcd486ab33a37ab95e15
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
- Changed remove() test to check the file just removed is gone.
Change-Id: I0b6c176e624134402b5547866064f436ce063f16
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
- subtest not valid if run as root so added a check and skip
Change-Id: Iae993e20f272f9303a75062ef00d22b49df5e84a
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
This abstraction imposed serious performance penalties and is being
dropped from the public API.
In particular, by allowing file names to be arbitrarily hijacked by
different file engines, and requiring engines to be instantiated in
order to decide, it imposed unnecessary overhead on all file operations.
Another flaw in the design with direct impact on performance is how
engines have no way to provide (or retain) additional information
obtained when querying the filesystem. In many places this has meant
repeated operations on the file system, where useful information is
immediately discarded to be queried again subsequently.
For Qt 4.8 a major refactoring of the code base took place to allow
bypassing the file-engine abstraction in select places, with
considerable performance gains observed. In Qt 5 it is expected we'll be
able to take this further, reaping even more benefits, but the
abstraction has to go.
[Dropping this now does not preclude that virtual file systems make an
appearance in Qt at a later point in Qt 5's lifecycle. Hopefully with a
new and improved abstraction.]
Forward declarations for QFileExtension(Result) were dropped, as the
classes were never used or defined.
Tests using "internalized" classes will only fully run on developer
builds. QFSFileEngine was removed altogether from exception safety test,
as it isn't its intent to test internal API.
Change-Id: Ie910e6c2628be202ea9e05366b091d6d529b246b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
History of the development before the import:
ssh://codereview.qt-project.org/playground/mimetypes.git
Mimetype definitions come from shared-mime-info where available (UNIX systems),
loaded using a mmap'ed binary cache generated by update-mime-database.
As a fallback if no cache is found, we parse the raw XML files otherwise.
This makes the MIME type support fast and with very low memory usage on UNIX,
and it makes it easy to use on Windows (no dependency on shared-mime-info,
Qt even includes a freedesktop.xml file to use if none are found on the system).
Change-Id: I27b05008216ff936dc463bd80d3893422bfb940e
Reviewed-by: Richard J. Moore <rich@kde.org>
The default constructor for QSettings does not set NoAccess status, even
if the organization domain, organization name, and application name are
empty. Instead of trying to fix QSettings, keep the existing behavior,
and test for it.
Failures from tst_QSettings no longer need to be ignored, so
mac:CONFIG+=insignificant_test has been removed from the .pro file.
Task-number: QTBUG-22745
Change-Id: Ic9f8b6821c483c217e1ef2ece704be2da169e340
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
The watchFileAndItsDirectory() test would fail due to atime updates for
the first watched file coming up to 2 seconds after the file was closed.
Observation shows that the atime has a 2 second resolution on Mac OS X
using HFS+, so add an appropriate delay to make sure that the atime
update from the kqueue based file system watcher can dispatch all
updates.
Task-number: QTBUG-22744
Change-Id: Ie79af20d6b4c154021307c8a8f6d336369720337
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
openStandardStreamsBufferedStreams would fail if standard streams were
redirected to a file (e.g. ./tst_qfile > testlog.txt).
openStandardStreamsFileDescriptors already has a workaround, so apply it
here too.
Change-Id: Iffe9d7864909e489e77c1114e80c4e3bc70a8722
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
- Run each test in a temporary directory, avoid writing test
files in source/build tree and prevents tests being influenced
by left-overs from previous runs and locks of the application
on the current directory.
- Modify test to be able to use absolute paths to the temporary
directory.
- Skip parts of test removeFileAndUnWatch if a race condition
occurs.
Task-number: QTBUG-24029
Change-Id: I215cc2e0fe6f92d2ffe597b01cdc9c9a39e3c5b4
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
This function returns true if the file path can be used directly with
native APIs, modulo encoding and path separator conversions. This is
important for applications that interface with other libraries or simply
need to use native APIs together with Qt.
Traditionally, this information was available in QAbstractFileEngine and
forced users to explicitly create an engine or use internal API such as
QFile::fileEngine to access the underlying engine and this piece of
information.
Given its usefulness, exposing the information in a more visible place
is more appropriate. This reduces the need for people to know or care
about implementation details, like file engines...
The existing isLocalFs test was updated and repurposed to use the new
API, instead of relying on file engines and internal implementation
details of QFileInfo.
Change-Id: I65f497bb25741f6f7ea4d2c3b3562c8c4aab8bea
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: David Faure <faure@kde.org>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
And fix documentation of toString() which said this was the method to
use for displaying to humans, while this has never been true.
Change-Id: Iff6df92e32b2517e1481d4992d80cae2d58da427
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
Reviewed-by: Giuseppe D'Angelo <dangelog@gmail.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
- Marked four tests insignificant due to failures, these need to be
fixed later and then re-enabled:
- tst_qfilesystemwatcher
- tst_qsettings
- tst_qlibrary
- tst_qsharedpointer
- Skipped one invalid case (tst_QCoreApplication::argc())
- Ifdeffed around vsprintf issue in MSVC (tst_QByteArray::qvsnprintf())
Task-number: QTBUG-24157
Task-number: QTBUG-24146
Task-number: QTBUG-24128
Change-Id: I4db957a65fbf0093f5ae3dc1a04d792492818104
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
QVERIFY2 and gracefully fail with an error message, rather than
crashing, if getgrgid() fails.
Change-Id: I82a7290f83208486577988cc831d5d3cba20f98e
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
- testCustomRuntimeDirectory test skips if run as root
Change-Id: Idcc2a1db5d8a96b2ec0248b8b1c392fffc0b2e11
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
- Added checks to see if running as root and skip as needed
Change-Id: I4f94d5bfe511c6dfda315854b7cd1f64efe6e4f4
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
When run as root was able to move file to /etc directory but was
expecting a failure.
Change-Id: Ic2ac5506253f2a3395ed56e88a856542bf82ad6d
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
The open test case tests opening a device path on windows.
As this requires privilege elevation, the test fails when running
nmake check from a console.
As the CI machines appear to run tests with admin privileges, first
check opening the device using the windows API. If that succeeds, then
opening using QFile should succeed. If that fails, the opening using
QFile should fail.
(Since Windows vista, members of the "administrators" group do not run
at elevated privilege all the time. The user needs to opt in via a
UAC prompt or "run as administrator". This is similar to using the
sudo command on unix)
Ran the test as administrator and normally. Now passes in both cases.
Change-Id: Ibd7682eceb61e35d4912fa0392df536f4331f6ed
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
QLatin1String now has a constructor that takes explicit length, which
makes it possible to create a QLatin1String that isn't null-terminated.
Made the QTextStream and QDebug << operators work in that case.
Change-Id: I94d051ce2ebfb2d2a403b96d25e040c80a54bf7c
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
- Changed to set working directory based on subprogram
stdinprocess's directory location.
- Changed QProcess execution of subprograms to use
relative paths.
Change-Id: Idbccca635f0f61adba9721bcceeceb0a8a961dcf
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Record the file, line, and function where a qDebug, qWarning, qCritical
or qFatal call happens, and make this information available in a custom
message handler.
The patch uses the C preprocessor to replace qDebug, qWarning, ... with
a line that also records the current file, line, and function. Custom
message handlers can access this information via a new QMessageLogContext
argument.
Change-Id: I0a9b89c1d137e41775932d3b1a35da4ebf12d18d
Reviewed-by: David Faure <faure@kde.org>
- Added check to testLocateAll() to check count() before calling
first().
Change-Id: I04e93c1f913972b26c517f2bbd08760f9898cc7a
Reviewed-by: Kurt Korbatits <kurt.korbatits@nokia.com>
Reviewed-by: Jason McDonald <jason.mcdonald@nokia.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
As in the past, to avoid rewriting various autotests that contain
line-number information, an extra blank line has been inserted at the
end of the license text to ensure that this commit does not change the
total number of lines in the license header.
Change-Id: I311e001373776812699d6efc045b5f742890c689
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
File system cached metadata can't be trusted when custom file engines
are in use, because the custom file engine may want to override the
metadata. (e.g. present an archive file as a directory)
Therefore, check if a file engine should be instantiated for each
result in QDirIterator. This is a fast check if no custom file engines
are registered.
When pushing a directory (using QDirIterator::SubDirectories) the
file engine needs to be instantiated also.
Task-number: QTBUG-23688
Task-number: ou1cimx1#965023
Change-Id: I0114c8df6258535553783a2486131c4194926649
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
(cherry picked from 3864ad09d578210b52e5f58fca2ee8a1144f5be2)
setEncodedUrl() isn't necessary anymore now that setUrl can handle
encoded (and partially encoded) urls.
url() is added for symmetry with setUrl().
Change-Id: I4e671482a5635a86797421ca50882db9cd60d852
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This fixes round-trip bugs. People expect to be able to do
QUrl u(...); QString s = u.toString(); QUrl u2(s); and have u==u2.
This was not true for paths containing a '#', for instance, which would
be parsed back as a fragment. The solution is to make toString output
partially decoded data (more readable than toEncoded, but not decoded
to the point of changing the meaning, if parsing it back later as a
QUrl), and to make the QUrl constructor work with partially decoded data.
Change-Id: I013c01e8947d538435f3c20fc4ec57cd9ccbba6c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There is no reason to keep two separated core types sets. It
couldn't be fixed before Qt5 because of binary compatibility promise.
This patch merges QMetaType core types with ext core types.
This "simple" operation consists of:
- QDataStream version was incremented, because type ids are
saved in QVariant's data stream.
- QMetaType LastExtCoreType and FirstExtCoreType were replaced by
LastCoreType, FirstCoreType and new QMetaType::HighestInternalId.
- New tests checking QVariant data stream for Qt4 and for Qt5 versions
were added.
Change-Id: I02dd74d29317365c297a789a4eb7c9c5edc3b231
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
URL schemes can only contain alphanumeric characters and all
protocols specify that they are case-insensitive. So instead
of doing case-insensitive comparison everywhere and then get
it wrong sometimes, better to lower-case it here.
Change-Id: I61f51a3f4c85b90af1586ebcf69608987fbe2ec3
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For asynchronous (overlapped) I/O notification on Windows one
can now use the convenience class QWinOverlappedIoNotifier.
It's using one global I/O completion port and a watching thread to
get notified when a read or write operation completes.
Change-Id: If6f904b364be0405580c7e50355529ab136ae3cb
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Bradley T. Hughes <bradley.hughes@nokia.com>
NTFS file access times are disabled by default since windows 6 for
performance reasons. The test now checks the registry setting and
reports XFAIL if access times are disabled.
Change-Id: Ia84ed0c8736e6c7d5817425006f6115d9f3e70a4
Reviewed-by: João Abecasis <joao.abecasis@nokia.com>
