Add the boilerplate standalone test prelude to each test, so that they
can be opened with an IDE without the qt-cmake-standalone-test script,
but directly with qt-cmake or cmake.
Boilerplate was added using the following scripts:
https://git.qt.io/alcroito/cmake_refactor
Manual adjustments were made where the code was inserted in the wrong
location.
Task-number: QTBUG-93020
Change-Id: I77299f990692b4fe4721a9bc35071608d0d23982
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Amir Masoud Abdol <amir.abdol@qt.io>
We've been requiring C++17 since Qt 6.0, and our qAsConst use finally
starts to bother us (QTBUG-99313), so time to port away from it
now.
Since qAsConst has exactly the same semantics as std::as_const (down
to rvalue treatment, constexpr'ness and noexcept'ness), there's really
nothing more to it than a global search-and-replace, with manual
unstaging of the actual definition and documentation in dist/,
src/corelib/doc/ and src/corelib/global/.
Task-number: QTBUG-99313
Change-Id: I4c7114444a325ad4e62d0fcbfd347d2bbfb21541
Reviewed-by: Ivan Solovev <ivan.solovev@qt.io>
CUPS has a feature called printer instances that allows saving
different sets of default options for a single print queue,
s. section "Creating Saved Options" at [1].
A printer instance can be set up using e.g.
lpoptions -p printer/instance -o name=value
The printer instance is then listed with the print
queue name and the instance name separated by a slash
in the 'lpstat -e' output.
Qt also supports CUPS printer instances and displays
them using the same as printer names.
However, tst_QPrinterInfo::getPrintersFromSystem was
previously truncating the printer name at the slash,
so the comparison of printer names on a system that
has CUPS printer instances set up would fail e.g. as follows:
********* Start testing of tst_QPrinterInfo *********
Config: Using QtTest library 6.5.0, Qt 6.5.0 (x86_64-little_endian-lp64 shared (dynamic) debug build; by GCC 12.1.0), debian unknown
PASS : tst_QPrinterInfo::initTestCase()
QDEBUG : tst_QPrinterInfo::testForDefaultPrinter() Test believes Default Printer = "PDF"
QDEBUG : tst_QPrinterInfo::testForDefaultPrinter() QPrinterInfo::defaultPrinter() believes Default Printer = "PDF"
QDEBUG : tst_QPrinterInfo::testForDefaultPrinter() QPrinterInfo::availablePrinters() believes Default Printer = "PDF"
PASS : tst_QPrinterInfo::testForDefaultPrinter()
QDEBUG : tst_QPrinterInfo::testForPrinters() Test believes Available Printers = QList("Canon_MX390_series", "PDF", "PDF", "PDF-5cm-margins", "dummy", "dummy-ricoh-c3000", "tofile-hp-officejet-8600", "tofile-ricoh-aficio", "tofile-ricoh-mufu", "tofile-samsung-m2875", "tofile-test-tdf106963", "tofile-xerox-phaser-6510")
QDEBUG : tst_QPrinterInfo::testForPrinters() QPrinterInfo::availablePrinters() believes Available Printers = QList("Canon_MX390_series", "PDF", "PDF-5cm-margins", "PDF/myinstance", "dummy", "dummy-ricoh-c3000", "tofile-hp-officejet-8600", "tofile-ricoh-aficio", "tofile-ricoh-mufu", "tofile-samsung-m2875", "tofile-test-tdf106963", "tofile-xerox-phaser-6510")
FAIL! : tst_QPrinterInfo::testForPrinters() Compared values are not the same
Actual (qtPrinters.at(i)) : "PDF-5cm-margins"
Expected (testPrinters.at(i)): "PDF"
Loc: [/home/michi/development/git/qt5/qtbase/tests/auto/printsupport/kernel/qprinterinfo/tst_qprinterinfo.cpp(232)]
Fix this by adding the slash character to the regex.
[1] https://www.cups.org/doc/options.html
Change-Id: Id0dc27a8b4c592847ed364cebf277e988039cad4
Reviewed-by: Albert Astals Cid <aacid@kde.org>
The vast majority of in-tree users pass simple and short C string
literals as the value. By porting to QByteArrayView, we document that
we'll accept non-NUL-terminated data, and do the NUL-termination
internally, using SSO'ed std::string, saving memory allocations in the
common case of short strings.
I didn't bother to check which direction std::string takes for
nullptrs these days (there was a change accepted in that area for
C++20 or 23), so play it safe and protect against them.
Follow-up to
Task-number: QTBUG-105302
Change-Id: I2369acc62f1d5cbc26135396cfe0602d8c75300c
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
CMakeLists.txt and .cmake files of significant size
(more than 2 lines according to our check in tst_license.pl)
now have the copyright and license header.
Existing copyright statements remain intact
Task-number: QTBUG-88621
Change-Id: I3b98cdc55ead806ec81ce09af9271f9b95af97fa
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
Replace the current license disclaimer in files by
a SPDX-License-Identifier.
Files that have to be modified by hand are modified.
License files are organized under LICENSES directory.
Task-number: QTBUG-67283
Change-Id: Id880c92784c40f3bbde861c0d93f58151c18b9f1
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Jörg Bornemann <joerg.bornemann@qt.io>
We have some special handling in qt_windows.h,
use it instead of the original windows.h
Change-Id: I12fa45b09d3f2aad355573dce45861d7d28e1d77
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
- process environment/DNS are OFF for INTEGRITY
Task-number: QTBUG-96176
Pick-to: 6.2
Change-Id: I189a97f88c96a428586c31a66b8d250e04482900
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Remove the qmake project files for most of Qt.
Leave the qmake project files for examples, because we still test those
in the CI to ensure qmake does not regress.
Also leave the qmake project files for utils and other minor parts that
lack CMake project files.
Task-number: QTBUG-88742
Change-Id: I6cdf059e6204816f617f9624f3ea9822703f73cc
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Complete search and replace of QtTest and QtTest/QtTest with QTest, as
QtTest includes the whole module. Replace all such instances with
correct header includes. See Jira task for more discussion.
Fixes: QTBUG-88831
Change-Id: I981cfae18a1cabcabcabee376016b086d9d01f44
Pick-to: 6.0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
tst_qprinterinfo compared the output of "lpstat -p" with the
result of a call to "cupsGetDests". "lpstat -p" only returns local
printers, "cupsGetDests" also returns printers on the local network.
This patch fixes the test by using "lpstat -e", which also
shows printers on the local network.
Pick-to: 6.0
Change-Id: Ia70adad8b8467f4c738f769d34757786fc9645b2
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This time based on grepping to also include documentation, tests and
examples previously missed by the automatic tool.
Change-Id: Ied1703f4bcc470fbc275f759ed5b7c588a5c4e9f
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
When the default printer supports a duplex mode other than DuplexAuto,
the unit tests change to QPrinter::PdfFormat and expect that
the pdf printer is in duplex mode then. However, the pdf printer
does not support duplex mode.
This patch removes this check.
Change-Id: If394f9f23fd244713bbb1ecce9d3802cbd281d90
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
The unit tests of QPrinter assume that a printer which is default-
initialized is the same printer as the default printer. However, when
no printer is set to default, this is not the case. When no printer
is the default printer, a default-initialized QPrinter will be the
first printer found.
This patch adapts the unit tests to work also when no printer is the
default printer, even though printers are available.
Change-Id: I4967e5b1c4fb8a7c33c911184289ec5cd283fc58
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Modify special case locations to use the new API as well.
Clean up some stale .prev files that are not needed anymore.
Clean up some project files that are not used anymore.
Task-number: QTBUG-86815
Change-Id: I9947da921f98686023c6bb053dfcc101851276b5
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Merging QAbstractPrintDialog with QPrintDialog, as proposed in the
removed comment, seems to have little value, given that the platform
specific implementations rely on the current abstraction.
Adjust examples and tests; with the QAbstractPrintDialog test now
testing the QPrintDialog::options API, the corresponding test function
can be removed from the QPrinter test.
Change-Id: Ia8906627898332e8590ea9b27e3d71dfcc6e8d71
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Adjusting the QPrinter test case - some use cases no longer exist, or are
already tested in QPageSize and QPageLayout tests.
Adjust examples and manual tests.
Change-Id: I01cbc65f3d8031aea2dac86dd942126ba708b111
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
And generate a few more test projects that were missing.
Change-Id: I5df51106549aa5ae09bc3c42360e14b143719547
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Use pro2cmake with '--api-version 2' to force regenerate
projects to use the new prefixed qt_foo APIs.
Change-Id: I055c4837860319e93aaa6b09d646dda4fc2a4069
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This show cases the new cleaner subdirs handling code in
pro2cmake.
Change-Id: I25001942ef020e4c4191b355f55309c4fb033ecc
Reviewed-by: Qt CMake Build Bot
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
This change removes the leftovers form other cleanup commits.
Task-number: QTBUG-76491
Change-Id: I61440f87c5a280f9666b78e19aac4d8ac603767e
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
This is part of the migration of qtbase from QRexExp to
QRegularExpression.
Task-number: QTBUG-72587
Change-Id: I949479066e114af0af85b6e62d90fd56b9c80077
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
The CreationDate entry in the two PDF files can potentially
be different depending on when the test is run.
97b4c5a574 already accounts for it but
the current tag for creation date is '/CreationDate'. Therefore check
if the line contains 'CreationDate' instead.
Change-Id: I1fc069cf935bba07084ac4a0743ff05312374d10
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This is less self-contained than what we have, but significantly speeds
up cmake configure/generate runs.
This patch also warns when a feature is already defined.
Change-Id: I8cab63e208ba98756b47d362a39b462f5ec55e20
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
When the page size was not valid on the new printer, it would end up
having the wrong page size name on the new printer. What should happen
in this case is that it should set the originally set page size as a
custom page size on the printer instead.
Task-number: QTBUG-62221
Change-Id: Iaca34ae262f5d0685ca60e4ca4b38229a2283289
Reviewed-by: Albert Astals Cid <albert.astals.cid@kdab.com>
Instead of an unconditional wait.
The QSKIP is necessary because the PDF format is non-native and the Windows
implementation of QPrintDialog doesn't work then.
The macOS implementation has the same warning, so add the check for that OS
as well.
The test has previously passed, since it hasn't seen not actually opening the
dialog as an issue.
Change-Id: Ib53e378b232580358f13e0c5206404412f9e6ee2
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Duplex doesn't really make sense in the context of printing to pdf,
and the variable was only being used in QCupsPrintEnginePrivate anyway
Change-Id: I801634c56759572825b5c9549d7a1dc92e5697a0
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Speeds up testing by a factor of 2.
Task-number: QTBUG-61827
Change-Id: I9d6c9d9786d35af3083bc7e98beb9a79dbcc7e11
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Unsetting the SOFTWARE environment variable will force lpstat to use
English for the output, so we can ensure that the test will pass
regardless of the language used for the machine.
Change-Id: Iddf5e8aadaa546ae3e0dd172df84e4e43ee02c2a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Introduce helper function which uses a number to build
unique names. Remove helper for deleting files since it
now uses a temporary directory. Add a few cases
that were overlooked in 88c68f4d9e.
Task-number: QTBUG-61827
Change-Id: I53355f99ffc3bfe6ad6994a5439710c9fa8cdad5
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
