it's module-specific.
on the way, fix it to actually support multiple files.
Change-Id: I796b0e98e38a54754022e0e2fa48cecb54d06ff4
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
qmake-generated version headers don't exist yet at the time syncqt runs,
so the forwarding headers would be deleted - just to be re-created a
moment later, thus changing the timestamp for no good reason.
Change-Id: I1b4c2f05f57c2315adf4b8dd726ea413ede1be5b
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the forwarding pri is loaded even if it was still created by syncqt, so a
top-level qmake -r will still catch it even in the future.
Change-Id: I2e4b556cd06eb88be9ee378662a2e6e1bff67ad7
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this makes qmake find them automatically now.
consequently, also do not write QMAKE_EXTRA_MODULE_FORWARDS to
.qmake.cache. still write the cache file, though, as otherwise a
top-level cache would mess up the module root detection.
Change-Id: I998b94fcc73ca3f8bf1af09a394ff8d40cf1fb76
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
instead, always pass -qtdir (which, btw, is a slight misnomer - it
should be -qtdatadir) with the correct path. this centralizes the
relevant logic in default_pre.prf.
Change-Id: Icc788d3f3e5f7b68b444e63e181efdea3b4ef160
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
now the phonon paths are actually normalized.
just relying on File::Spec for the path relativization, so the code is
much shorter.
Change-Id: I69d6bac73e366ed0f754e1282a375871ce5559c4
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
The common root dir detection was broken, because
of an inconsistent root drive path style:
<srcbase> = /c/dev/qt/5.0/qtbase
<outbase> = C:/dev/qt/5.0/qtbase
Now we don't need ActivePerl anymore.
The Perl that comes with msysgit is enough.
After every Perl function call that returns a file path
we need to normalize it to bring it into a form that can
be used by
- Perl functions that take a path as parameter,
- C++ sources as include file path,
- qmake's .pro files as include file path.
Task-number: QTBUG-25912
Change-Id: If1cf56cc7246a9d6535cd3867222f225d1617712
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
syncqt is run twice when using the top level configure (as in
the CI system). The pri_install_files and pri_install_pfiles
variables are not populated if the file already exists when
generating the compatibility headers.
Therefore, headers.pri ends up with different content in
each syncqt run. In the first run, the compatibility headers
are part of SYNCQT.HEADER_FILES. In the second run, they
are not part of it since the header files already exist.
Change-Id: I4908fb934a639a3c9f6af1796d56a40fd4df2d50
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Sergio Ahumada <sergio.ahumada@nokia.com>
qpa header files were not installed under qpa/.
Change-Id: I243c3a7e83a342f7485791a1a29b65c9a8f25d6b
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
The main reasons for doing this are:
1. _qpa.h end up in the master QtGui include file. QtGui is meant for
userland applications. qpa code is neither binary nor source compatible.
Inadvertant use of QPA api makes the user code binary-incompatible.
2. syncqt creates forwarding headers for non-private header files. This
gives people the impression that this is public API.
As discussed on the mailing list, even though QPA api is internal and subject
to change, it needs to treated differently from private headers since they
will be used by in-qtbase and out-of-qtbase plugins.
This commit does the following:
1. The _qpa in QPA header files is dropped.
2. syncqt now treats any file with qplatform prefix as a special file and
moves it to qpa/ directory. The recommended way of using QPA API in plugins
is: #include <qpa/qplatformfoo.h>. This allows the user include QPA API
from multiple modules (for example, qplatformfoo might be in QtPrintSupport)
3. The user needs to explicitly add QT += <module>-private to get access to
the qpa api.
4. Creates compat headers for the olden style qplatformfoo_qpa.h and QPlatformFoo
includes.
This commit does not change the cpp filenames. This requires a more careful
merging of existing non qpa cpp files and existing cpp files on a case by
case basis. This can be done at anytime.
The following files are not renamed as part of this changed but will be fixed
as part of a future change:
src/gui/kernel/qgenericpluginfactory_qpa.h
src/gui/kernel/qgenericplugin_qpa.h
src/gui/kernel/qwindowsysteminterface_qpa.h
files were renamed using
for x in `find . -name "qplatform*_qpa.h"`; do git mv $x "${x/_qpa.h/.h}"; done
for x in `find . -name "qplatform*_qpa_p.h"`; do git mv $x "${x/_qpa_p.h/_p.h}"; done
includes were renamed using script
for file in `find . -name "*.h" -or -name "*.cpp" -or -name "*.mm"`; do
sed -i -e 's,.*#.*include.*<\(Qt.*/\)\?\(QPlatform.*\)>,#include <qpa/\L\2.h>,g' \
-e 's,.*#.*include.*"\(Qt.*/\)\?\(QPlatform.*\)",#include <qpa/\L\2.h>,g' \
-e 's,.*#.*include.* "\(qplatform.*\)_qpa.h",#include <qpa/\L\1.h>,g' \
-e 's,.*#.*include.*"\(qplatform.*\)_qpa_p.h",#include <qpa/\L\1_p.h>,g' \
-e 's,.*#.*include.*<\(Qt.*/\|Qt.*/private/\|private/\)\?\(qplatform.*\)_qpa\(.*\)>,#include <qpa/\2\3>,g' \
-e 's,.*#.*include.*"\(Qt.*/\|Qt.*/private/\|private/\)\?\(qplatform.*\)_qpa\(.*\)",#include <qpa/\2\3>,g' \
$file
done
Change-Id: I04a350314a45746e3911f54b3b21ad03315afb67
Reviewed-by: Morten Johan Sørvig <morten.sorvig@nokia.com>
Reviewed-by: Samuel Rødal <samuel.rodal@nokia.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@nokia.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Reviewed-by: Gunnar Sletta <gunnar.sletta@nokia.com>
When modularizing our documentation, module level
documentation is supposed to go into a doc
subfolder in the modules sources. Since this folder
also contains header files (snippets), we need to ignore
it in syncqt.
Change-Id: If8159816b042a1a6c810eaa0b6dbd99bf58d8ffa
Reviewed-by: Casper van Donderen <casper.vandonderen@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
That includes non-standard macroses for QtAddOns, e.g. for QtJsonDb addon the
macro looks like QT_BEGIN_NAMESPACE_JSONDB - by default syncqt doesn't
recognize the macro and concantenates it with the next line in the header file,
which breaks forward include generation if that next line is the class
definition.
Change-Id: Ia269f8a091113e4951d6a2615ef392b21bd5e3a3
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
If a deprecated header file is not writable, report the error message.
The existing error message statement is not processed due to an
operator precedence issue.
Change-Id: Ifb2d4e234c64e560d05c021c621966bce19ce215
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
When creating a deprecated header, create the directory it will be
located in, if it does not yet exist.
Change-Id: Id0ac7327e7dfe5b3e34b431c7bc3844b72251a3d
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
After discussion with Liang, I'm reverting it as he requested. This change put every header into the SYNCQT.HEADER_FILES twice for in-source builds, and the qtMODULEversion.h header did not include a path component.
This reverts commit 2fbc45b58bba860abf67fb28aa1319c9f4ededaf
Change-Id: Ie84cef19193ce5e49072f1f67a41140d9d2673b8
Reviewed-by: Liang Qi <liang.qi@nokia.com>
As in the past, to avoid rewriting various autotests that contain
line-number information, an extra blank line has been inserted at the
end of the license text to ensure that this commit does not change the
total number of lines in the license header.
Change-Id: I311e001373776812699d6efc045b5f742890c689
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
It was put in source tree before.
Task-number: QTBUG-20439
Change-Id: Ib52d9c2e83ae375aad259ddc74138bbc728b3ed0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
$publicclassregexp specifies the prefix for Qt classes in a qt5 module. For example
in QtJsonDb all classes have "JsonDb" prefix and forward include headers were
not generated properly - e.g. "jsondb-client.h" was generated in the include
folder, but "JsonDbClient" (which matches class name) was not.
Change-Id: I6b57a799d926254e2ab3fd00fa6e38f95b8eb96c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
Reviewed-by: Prasanth Ullattil <prasanth.ullattil@nokia.com>
Change-Id: Ibd2d974ac46f80953f628e8d7c93e742e4c8eb23
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
Reviewed-by: Jonas Gastal <jgastal@profusion.mobi>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
that way invocation via perl (c.f. syncqt.bat) does not need options.
Change-Id: I5d8e0d1f0ffe1b7cf280fe97d4f70968a3dbbb22
Reviewed-by: Giuseppe D'Angelo <dangelog@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
These defines were there to aid in the commercial
licensing scheme we used long ago, and are no longer needed.
Keep a QT_MODULE(x) define so other modules continue compiling.
Change-Id: I8fd76cd5270df8f14aee746b6cf32ebf7c23fec7
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
QT_MODULE_BASE is exclusively used to refer to the top-level source
directory of a module. However, in non-developer-build mode (used
only when the build path is not equal to the install path), syncqt
would incorrectly set the value of QT_MODULE_BASE to the build
directory. This caused all $$QT.<module>.sources variables to point
to the wrong place.
Make it always point to the source directory.
Change-Id: I401cf000f9e3a4ab97d68db40330bb98aec25a9a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
When renaming classes, or when moving classes from one module to
another, it's useful to have a simple way of supporting the old
API/location for some time. To this end, syncqt shall now recognize
a "deprecatedheaders" section in sync.profile. It looks like this:
%deprecatedheaders = (
"QtDeclarative" => {
"qquickcanvas.h" => "QtQuick2/qquickcanvas.h",
"qquickitem.h" => "QtQuick2/qquickitem.h",
"QQuickCanvas" => "QtQuick2/QQuickCanvas",
"QQuickItem" => "QtQuick2/QQuickItem",
}
);
In the above example, syncqt would generate a header called
qquickcanvas.h for the QtDeclarative module; when included, this
header will issue a warning and include <QtQuick2/qquickcanvas.h>.
And so on, for the other entries.
Deprecated headers are installed along with the module's normal
headers.
Change-Id: Ie2518b42275c2b2ff44216f07d376ccf5be6dc45
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
The forwarding headers in 'include/Qt' were deprectated in Qt 4. This is
Qt 5, so time to remove them.
Change-Id: I4bf3797475b91f58af1761ed4165b552613299b3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
Each directory is separated by a ';'. The syntax was chosen over the
regular perl [] syntax as ';' was used already in other places.
Change-Id: I7a07a1facb7c08d7a9de6ec45ad57f6057cb0150
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
This adds Aaron's copy of V8 to src/3rdparty/v8 (as a
git submodule), and builds it as a "normal" Qt library
(without any dependencies on Qt itself).
The library can be added to a project with
QT += v8-private
V8 API headers are available as private includes, e.g.
#include <private/v8.h>
The API is private because we're exposing a third-party
API directly, and we don't want to (and cannot) make
source or binary compatibility guarantees for it.
Since we want the V8 public API headers to be private
headers in Qt, syncqt and sync.profile were extended to
understand a new configuration option, the
@allmoduleheadersprivate array, that tells syncqt whether
all the library headers should be treated as private even
though they don't follow the _p.h Qt convention.
The V8 project files, patches and autotests are copied
from the QtDeclarative repository. The next step after
this commit is to remove QtDeclarative's copy of V8 and
link with QtV8 instead.
Task-number: QTBUG-20963
Change-Id: Ib8820362cdbc8fa662a5e97db841656cf38d1b62
Reviewed-on: http://codereview.qt.nokia.com/3092
Reviewed-by: Kent Hansen <kent.hansen@nokia.com>
Reviewed-by: Lars Knoll <lars.knoll@nokia.com>
If sync.profile points to a location that does not exist in the
%modules section, the version header cannot be written.
Report the error clearly so this problem can be identified.
Change-Id: Ib681087f46362487ffb621221d33cf9b7e54df2f
Reviewed-on: http://codereview.qt.nokia.com/2761
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Michael Goddard <michael.goddard@nokia.com>
We need this to avoid syncing certain files in QtDeclarative on
Windows.
Change-Id: Ia9fc95262ac18bafc39efc038ea70a1b5d67cddd
Reviewed-on: http://codereview.qt.nokia.com/2641
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
And try to fail a bit more gracefully if it isn't.
Change-Id: I62e01c0536aa0a032940d6a9a5ccf5edcfeef221
Reviewed-on: http://codereview.qt.nokia.com/2109
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Rohan McGovern <rohan.mcgovern@nokia.com>
Reviewed-by: Michael Goddard <michael.goddard@nokia.com>
An extra script is added (qtmodule-configtests) which is currently
invoked from syncqt (with some derived parameters passed to it).
The module can optionally have an entry in the module's sync.profile
file in the form of a perl map of "test name" => parameters. Tests
can print an advisory message if they fail (e.g. "Install this
SDK/dev package"), or abort the syncqt process (e.g. mandatory
prereq missing). Also, if the test has a "requires(foo)" line
that results in it being skipped, this is also supported.
Change-Id: Ic3c820a488a0992c944994d4d7dc283da36742d6
Reviewed-on: http://codereview.qt.nokia.com/928
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Sarah Jane Smith <sarah.j.smith@nokia.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
Makes it easier to track which library output is coming from,
when building Qt with -j > 1.
Change-Id: I9acda04e84014dc441e409a0b24b2f78762dcc1c
Reviewed-on: http://codereview.qt.nokia.com/1765
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
By default, syncqt will now compress the console output of what it's
doing. Increasing the verbosity level will make syncqt output the same
as before
Change-Id: I542072504f022f87997b4036eda5747a5da88839
Reviewed-on: http://codereview.qt.nokia.com/1764
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Also add a fixme, since the version headers are currently
being created in the source directory.
Change-Id: If6e9eeba854a1f35561b69518eb8739dc28a58be
Reviewed-on: http://codereview.qt.nokia.com/1763
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
We need the content of the generated module master headers to be
reliable, so rebuilding in the same environment doesn't produce
different results. This minimizes the diff from package building
systems.
Change-Id: Ic914f56e13b11f313f01f6b8666c2d28aa50a985
Reviewed-on: http://codereview.qt.nokia.com/1900
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Arvid Picciani <arvid.picciani@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
We use syncqt to generate .qmake.cache also for submodules, which
contains the location of forwarding module profiles for that module.
This enables us to build without having to put module profiles into
mkspecs/modules until install time.
Also added support for -developer-build to syncqt.
What it does is to point build directories for binaries and
libraries to a common location in QtBase. This is more
convenient when doing development, since you don't need to set your
path to every module's bin/ directory, but it cannot be used with
release builds, since they need to build independently of QtBase,
in their own directory.
Change-Id: I959c62c11c644f2147a98da894a72452d9c44327
Task: QTBUG-19585
Task: QTBUG-19583
Reviewed-on: http://codereview.qt.nokia.com/232
Reviewed-by: Qt Sanity Bot <qt_sanity_bot@ovi.com>
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
