this is a purely internal variable. projects are supposed to
query $$TEMPLATE only.
Change-Id: I32a3aa7012a4fedcf6e77e2e1302ed978baac700
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this is cleaner by design and allows removing some hacks.
Change-Id: I3270195b5d62caa476ffde7c1e1ef43cec99c565
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
these are not actually used inside qmake since ever the code was factored
into moc.prf.
Change-Id: I545f4857ca3f0b4bf2439703700069ac67ad4ca2
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
it's really only a host setting which is not used any more past the now
removed assignment.
Change-Id: I62c61c893697eb9a7e7be550311bf152d5a8206e
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
get the actual spec path directly from the project - the specs in Option
are not necessarily resolved.
Change-Id: Ia2bf2199c5269aa5b5a9d4c38de36171f25d448b
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
doesn't make much of a difference on unix (as the default specs are just
symlinks).
on windows, it makes the gross hack used for finding spec-specific wince
default_post.prfs unnecessary.
Change-Id: Id403dce5be487e1ae22c1f54b8095a6afdd98bc8
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this is cleaner than resolving it on-demand, as it avoids statics (with
potential side effects on dynamic spec switching).
Change-Id: I2bc15a4c3108376e1b4a01351875fe0c445ee5d5
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
it's completely counterproductive. just include() the file instead.
i don't think anyone knew about this "feature", so just removing it.
as a side effect this removes the repeated existence check of already
found feature files, as we can use a clean else-if cascade.
Change-Id: I5d38d38d0a897f2e8857ac68d5649fd4367941c4
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the project evaluator becomes oblivious of the target mode.
the mode is set up in spec_post.prf according to the spec.
$$QMAKE_TARGET contains the feature suffixes to search, and is also
contained in $$CONFIG.
the target_mode variable itself becomes private to the Makefile class.
Change-Id: I3c06d9dab536b753343cec6c5c491d3203e50bd8
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
these are read before the qmakespec and before the cache, resp.
this will allow moving some hard-wired logic out of qmake.
Change-Id: I6a63050d7798bc30a4add8c009bcd801a29a0deb
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this should significantly cut down the time wasted looking for files in
non-existing directories, in particular on windows.
Change-Id: I7ab3523fe8c028e3787ebc78e4543ab04f53448e
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this limits references to this variable to its setup and explicit cache
manipulation.
Change-Id: I88dd2418051501abea201f223da7759a15f1c249
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
it wasn't really wired, so the only effect it had was disabling the unix
scopes (despite an attempt to override that in the spec, which probably
worked before qt 4.6, and will start working again soon).
Change-Id: I95daff75b508edaf83a8a06fd327350acd62b124
Reviewed-by: Rolland Dudemaine <rolland@ghs.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
(some of) the generators are (moderately) x-platform, so it makes no
sense to nail the host platform to a generator (and thus a spec).
overriding the host platform is only a debugging mesasure anyway, so one
can use the (now undocumented) -unix/-macx/-win32 options for that.
Change-Id: If2a059f1feeb2c726e5838625ede1c7add829985
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Mark Brand <mabrand@mabrand.nl>
they have been deprecated long enough, so we can mess with them now.
don't make them set the target mode any more; the makespec can do that
autoritatively. instead, they can be used to override the host mode for
debugging purposes.
Change-Id: Ife5fdcf4f1b6b926901a80896ac92b7d821278d1
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the only callers which used non-default arguments are gone now, so remove
the arguments entirely. this also enables us to re-enable result caching.
Change-Id: I62f76e17e531a4eeafddb9b29716ca0a0eb3dbea
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the specs in Option are now only fixifiable absolute paths if an actual
path was passed on the command line - otherwise these are just names,
and we should pass them on verbatim.
Change-Id: I5b3535dadf2d6b2b3116331e6636f6e363a5361f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
if source and build dir are direct children of the common root and we
are shadowing the top-level source dir, there is of course no trailing
slash to match.
Change-Id: I8a34a6a72d16cb21d77d056e037235af9b32a008
Reviewed-by: Davide Pesavento <davidepesa@gmail.com>
Reviewed-by: Andreas Hartmetz <ahartmetz@gmail.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
The return type of isActiveConfig is a boolean, so return that when
host_build is queried.
Change-Id: I6d1420b49b09e51442c4b2d482e2f19b165081d8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
Integrated the checksdk tool into qmake and made
the makefiles selfcontained, so configure make, is now
enough to build qt for wince
Change-Id: I29076702eca2ec23d4d06bb3d5c5cef9d4f95161
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
instead of making the "real" targets depend on the makefiles, add
conditional makefile generation to the targets themselves.
this causes makefile generation to follow the recursion order determined
by the project, which is important when dealing with prl and module pri
files.
a side effect of this is that qmake and make calls are interleaved now,
which is entirely different from a 'qmake -r' run.
on the downside, calling make with multiple targets which operate on the
same subprojects without prior makefile generation will make a mess, as
the qmake calls will be racing. this should be no problem, as qmake does
not generate recursive targets where this would be useful - at least by
default.
it is not sufficient to just order the creation of the makefiles
non-recursively (e.g., by using gnu-specific order-only-prerequisites),
as an interrupted and subsequently resumed build would happily skip the
nested makefiles.
workable alternative approaches would be walking the entire tree in a
pre-pass to ensure makefile presence (which is incredibly slow) or
creating additional stamp files only after recursing and having the
makefiles depend on them (which is ugly).
Task-number: QTBUG-23376
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Change-Id: I88d3e7610215677d362026de316513d3bea04b06
instead of hard-coding platform differences, use a variable.
Change-Id: I20e98811ad5f07429148c6f88aedbabc3ba58fff
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
everything in the projects should be normalized. only the makefile
generators need to adjust it to the native form.
Change-Id: I06a4e997f32134d13949ec4a9dd1b44367aab7cb
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
no point in entering the outdir and leaving the indir.
this doesn't really matter except for the obsolete borland generator,
but whatever.
Change-Id: Ieb4e4c549ebd65f99e4d00819c52822968b060a4
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
the code above already deals with the differences
Change-Id: Ifb799e46f5187e7bd3d0f0169e868ad267bcfe23
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
no need to define an obscure variable for it. just inline it.
the assignments are left in for compatibility with hand-written commands.
Change-Id: I9bc3914e2c4116f3b8fe00a421ca0f036bb7e214
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
so far it would rebuild the makefiles one level down only, which is
somewhat arbitrary and not really helpful.
Change-Id: I5fe01f379ecc4b210610a674d7df7dfc18131eef
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
that's consistent with other projects. 'qmake_all' can be used for
recursion.
Change-Id: Ie6d620f7a3e0e28d3f2f82f01ca94c2f46137c68
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
$(MAKEFILE) is our own file, and using it would wreak havoc if it was
named anything but Makefile.
Change-Id: I51cae2014a85399b409f18788f864ff2a82e493e
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
if a "subdir" project added a project file from the same directory as
itself, "/." would be appended to the path, which is obviously not useful.
Change-Id: Ia733dedb57e568c5cf9a3d5eb29727176a5142c5
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
webkit does some unholy tricks with the ordering of qmake and make
invocations, so it does not work with qmake -r. to make it still
possible to integrate it into the qt5 aggregator project, give it a
chance to "break out" from the recursion.
Change-Id: I926836e44c0e0790cdd90e6b0c8f766dccc33c4d
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@nokia.com>
otherwise a cache/config in an aggregator project may unduly hide the
mkspecs/ of the aggregated project from qmake's view.
Change-Id: Idb0b124de071822f8f55463d9f8a4d194ef3130e
qmake will now look for .qmake.super, just like it looks for .qmake.cache,
and the cache() function has a mode to write this super cache.
this allows the creation of aggregator projects like, say, qt5.
a notable difference to the normal cache is that this file is *not* added
as a dependency of the Makefile. this means that modifications done by
later sub-projects will not cause a re-processing of earlier projects, and
consequently that one should be cautious regarding what information to
store there.
another notable difference is that this file is read *before* the spec,
so the spec can use the variables from the cache without resorting to
$$fromfile() & co.
Change-Id: I4807b6d34014261fa9eebd6f0ae128b802d86691
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this is the source dir equivalent of .qmake.cache and can be checked
into the repository. it can be used to make project-wide settings, or
just to signal the presence of an mkspecs/ directory.
Change-Id: I5f1cebad2aa2a89e78089341b2051613b6b7a613
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
this allows the creation of aggregator projects, like, say, qt5.
this is not expected to have a negative impact, as no project could
reasonably expect a nested .qmake.cache to *not* take effect - in fact,
if the project was processed stand-alone, it would already use it.
Change-Id: I33f2935d309baba7e95465f2fefb8231c4f03eda
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
don't even complain about trying to use js-based feature files. we have
been doing that for long enough.
Change-Id: Ib58ec204322442c488e8d780989f26b1e32595ed
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
properties are now split into a write location $$[FOO] and a read
location $$[FOO/get]. the write locations are hard-coded and configurable
via qt.conf/Paths as before, while the read locations are configured via
qt.conf/EffectivePaths.
this finally provides a clean solution to the problem that during the qt
build itself tools and libraries need to be taken from somewhere else
than they are installed to.
Change-Id: I956c43bd082afd465e690fe75d0bee3c2c0f7c25
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Reviewed-by: Robin Burchell <robin+qt@viroteck.net>
make_first really means the same, as the default target is 'first'
which immediately invokes make_first.
as a nice side effect, this fixes ALL_DEPS not being used by the subdirs
template's default target - make_default wasn't special-cased in the
right place, while make_first is.
Change-Id: I946cea3b2dae198eda61d31dbd19c6ccd15deac7
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
returns the list with the order of the elements reversed.
one can easily implement this with existing functions, but this is way
faster and more readable.
Change-Id: I12d306eb9fe58fc332622274ea6b658192529491
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
to be used in system() calls and when assembling EXTRA_COMPILER and
INSTALLS .commands by hand.
Change-Id: Id706cd56aa267a9fb4b14e3416692b4716fafa5b
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
just exposes QDir::fooFilePath() wrapped into QDir::cleanPath()
Change-Id: I7a7644084825fd8092a9910ac20f695c4d9351f6
Reviewed-by: Marius Storm-Olsen <marius.storm-olsen@nokia.com>
