!build_all is a sufficient condition for bundling headers in both debug
and release configurations, as it means that we will likely make only
one of the builds, and that needs to be self-contained.
Task-number: QTBUG-34575
Change-Id: I1a19e4b619eeff207cfbfd50d3b761053aeaa667
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
as this new cache category comes without side effects, we can
unconditionally create a cache whereever we are. this allows us to be
performant without explicit user action.
Task-number: QTBUG-31340
Change-Id: I6b88b20b61e8351aa8cbf94ad3eec65adac6e1d6
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Filter out module QML import paths that point to
nonexistent file system paths.
Change-Id: I897ef50593eeb46c6c9eaec27313ec12e6113cb6
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Some modules, such as Qt Multimedia, needs special permissions
to avoid getting exceptions at run-time. We should apply these
by default to the AndroidManifest.xml so that an application
using e.g. the camera will work out of the box.
Task-number: QTBUG-33953
Change-Id: Ibc1f086d249197b63e7ed1075ae7d54bdd1212f2
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Reviewed-by: Christian Stromme <christian.stromme@digia.com>
The qtAddModules functions resolves deps internally, but doesn't affect
the original QT and QT_PRIVATE variables. We need to pick up situations
such as the user adding QT += quick, which implies QT += qml through
the QtQuick module's dependecies.
Change-Id: I14411dbea3e4f7402be404073a3fe8f18dbb165f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
We need to add the correct suffix to the libs we add when
running qmlimportscanner. Otherwise we will always add
release versions of the libs instead of debug versions
when generating debug builds. This in turn will confuse the
xcode generator that will try to convert the libs in
LIBS to native Xcode build variables.
Change-Id: I4d9fab49ad9e644e9bfd06caf79fc084bde2a3b7
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
this makes it possible to properly exclude entire subprojects based on the
availability of features, rather than stuffing every single source file
with #ifdefs.
the defines are aggregated from the -qconfig <profile>,
-no-feature-<foo> and some other configure flags.
usage:
load(qfeatures)
!contains(QT_DISABLED_FEATURES, textarea): SUBDIRS += textstuff
Task-number: QTBUG-28102
Change-Id: I83400632d64312fa4b907e1318dddfe27c432387
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Reviewed-by: Tasuku Suzuki <stasuku@gmail.com>
But still fall back to 'com.yourcompany', just like Xcode does for the
initial launch.
Change-Id: I89afadefafc254a0014aca197741d42a0199943e
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Make already the creation of the generated cpp file depend on the
creation of the generated h file, which transitively ensures that
the cpp won't be compiled before the h is there.
Change-Id: Idd3aec8d72dac341e835a3d1ef8f2986dbc1ab9f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Makes it possible to join two separate builds, and opens up for using
exclusive builds to do this.
Change-Id: I87ccbdd55511fdfbef3fe8b581f40525ebf077ed
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
We used to compute the default exclusive build directory, eg 'debug', at
configure time, and then set OBJECTS_DIR, MOC_DIR, etc to include this
hard-coded default exclusive build directory. We then had to run a post-
process step where we replaced the 'debug' part with the current actual
exclusive build pass, eg 'release', resulting in long-standing bugs such
as QTBUG-491 where we end up replacing parts of the build output dirs
that were not part of the original exclusive build directory.
We now set the OBJECTS_DIR, MOC_DIR, etc defaults in configure like
before, but they do not include any exclusive-build information. The
exclusive build directory is handled as a separate step in default_post
where we adjust all entries in QMAKE_DIR_REPLACE to be exclusive
directories.
For backwards compatibility the new exclusive build behavior is only
enabled for variables named by QMAKE_DIR_REPLACE_SANE, which for Qt
itself applies globally to everything but DESTDIR, and for libs and
tools also applies to DESTDIR. The reason for leaving out DESTDIR in
the general case is because many tests and examples assume the old
behavior for DESTDIR. A side effect of including all the other
variables for Qt libs and tools is that the PCH output dir will be
uniformly set, which has been an issue on Windows in the past.
The addExclusiveBuilds function now takes two or more arguments,
each argument being the key for an exclusive build, which can be
customized eg. using $$key.{name,target,dir_affix}. Passing more
than two arguments results in three/four/etc-way exclusive builds,
eg debug/release/profile. Exclusive builds can also be combined, eg
static/shared + debug/release by making two calls to the function.
We also handle individual targets of combined exclusive builds,
eg static/shared + debug/release, meaning it is possible to run
'make debug' to build both static-debug and shared-debug.
Task-number: QTBUG-491
Change-Id: I02841dbbd065ac07d413dfb45cfcfe4c013674ac
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Otherwise we won't pick up CONFIG+= changes on the command line or
from the project file.
Change-Id: I6f7e9380f971e6271de5659534e9565024fe041d
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
module names use dashes, but the internal module representation uses
underscores, so we must translate.
Change-Id: Ib6983d3731e7dae2a4d6232f8a5202390fd425e9
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Before this patch, we would copy "$QTDIR/qml"
directly into the bundle as "qml". This would cause problems
if the user also tried to deploy qml files to a "qml" folder, or
if any other file in the bundle ended up with the name "qml" (which is the
case for QtDeclarative/tools/qml, where the executable is called "qml").
This patch will instead copy the contents of each import folder
into QMAKE_QML_BUNDLE_PATH, which will default to "qt_qml" on iOS
and "Resources/qt_qml" on OSX.
We also change the implementation to use a post script rather
then QMAKE_BUNDLE_DATA for two reasons:
1. Xcode does not like "copy build phases" to copy folders, only
files (You cannot even create such a phase from Xcode, although
it is possible to force it the way we create project.pbx. But
this was error prone)
2. We need to strip away unneeded files from the bundle, like
archives (which are linked in statically, not dlopened run-time).
Using rsync lets us copy and strip in one operation.
Change-Id: I7c2117f6cfbe11efdc272dff71adb0b1e619a5ff
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
the module project files declare what plugins they need, as that is
necessary for automatic android deployment.
enable wider usage of this by making the information available from the
module .pri files.
caveat: the variable is called "types", but is in fact paths, so there
can be particular plugins named.
use this new facility to replace the egregious hard-coded list of
plugin-to-module mappings from create_cmake.
possible todo: automate populating DEPLOYMENT (for wince, and whatever
else).
Change-Id: Ibb9c07cfe2b0008905204cbeb81e9c8e2ae4dc69
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
instead of being magic attributes of the main modules, the privates
are now proper modules of their own.
this cleans up some code paths, is more mappable to other build tools,
and enables private modules to depend on other private modules.
note that the library path is needed even in the "empty" private
modules, as in the framework case that's where headers are found.
consequently, the modules need to be explicitly marked with the new
"no_link" flag. this required some reorganization of qtAddModule().
Change-Id: I8e4f44a609f8d639cc01bcb658256870a627eb63
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
This is needed to ensure that list(REMOVE_DUPLICATES) can work.
Change-Id: I3d992aa244fcdfbda7e3b48ce416e0ba5ffcde96
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
This is necessary so that list(REMOVE_DUPLICATES) works properly.
Change-Id: Id268637d76b1a8785c9ff0c6e09e9ad8a62bbfb6
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
it was introduced as a hack to simplify writing tests, but the change to
make use of it was backed out of testlib and nobody seems to care.
Change-Id: Icc86621b865276e86593afdb923247bbdca19d49
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
it's wasteful, given that exactly one add-on module (and most probably
nobody else) needs it.
i'd do the same with yacc and lex, but i suspect this would cause quite
an uproar.
Change-Id: Ic2a6ca19e829393835f824e31cd0893e78c3fd39
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
the variable may contain a complex command, so an exists() check is
doomed to failure if the tool is built dynamically.
also, the check is not really necessary: it failing indicates a bug in
the qt build system, and we don't really need to complicate the code to
deal with such corner cases.
Change-Id: I2e6087dcc6dd4a4f70bdf739550276f364c880dd
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
if the user knows that no additional imports need to be linked, this
can be used to optimize the build time.
as it happens, it can also be used to fix the build of the qml tools
themselves ...
Change-Id: Id77aea1f20cabdc2e831540c61d8a4b8e85c040b
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
This was created for the iOS port and intended to be cross-platform,
but since then they got cold feet and never added the support.
It makes no sense to only support this on Android. We need to
remove it again and hold off until we can find a proper solution.
Editing the AndroidManifest.xml is the non-cross-platform
solution for this.
Task-number: QTBUG-34166
Change-Id: I51d53b82a3412a9016de01612dd8df9ae12c6633
Reviewed-by: BogDan Vatra <bogdan@kde.org>
Run qmlimportscanner, add found plugins to the LIBS
line, generate qml_plugin_import.cpp.
Change-Id: I6c6b927cceb36fa2dc405ad698f26d20398b33c8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
Non-framework builds would automatically link to whatever Qt library
matched the config at the time of running qmake, eg hard-coded to
libQtCore_debug, while Xcode itself allowed the user to switch between
release and debug configurations.
We now append an Xcode settings variable to the library path, which gets
resolved at build time depending on the current config in Xcode.
Change-Id: I12873e38a28d9595ef3fd0ae0ad849e6744833a9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Change-Id: I2e874af4f5bf22a3028b7099c39436c400136386
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
When building for x86, the prefix for the tools is not equal
to the prefix for the toolchain directory, so we need a separate
option for this.
Task-number: QTBUG-34110
Change-Id: Iefe8c37892eb6c31fc8762bfb7bc7c6c23cd8b1e
Reviewed-by: BogDan Vatra <bogdan@kde.org>
The source includes shouldn't be used by installations, so
don't install the extra file, but only use it if the package
is used from the build-dir.
Task-number: QTBUG-33970
Change-Id: I08f91b8a716e935cb04d1233d44cf5c092e240ce
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Stephen Kelly <stephen.kelly@kdab.com>
The DLLDESTDIR is not related to the install location and is not
populated for prefix_build configurations.
That resulted in the CMake files attempting to find the dlls in the lib/
directory instead of the bin/ directory.
Change-Id: Iec6a7c9b6dd656278b70ab128f3df9e8c45bbe4a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
As they are closely tied to the macx-ios-clang mkspec and can't be shared.
Change-Id: Icb59304cc1e4be12732f50175f3f84be289300c2
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
When we build qml plugins, we now depend on embedding
the uri of the plugin into its meta-data using the new
-M switch to moc for static builds.
This patch will let this happen automatically whenever you
call load(qml_plugin) from your pro file.
With this patch, you only need to rebuild your plugin
to support static applications.
Task-number: QTBUG-28357
Change-Id: I99e2fc80688fa43cf734551553f4fa0cb5ed47ed
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Shared between UNIX and Win generators, and allows prfs after
default_post to rely on sane TARGET and DESTDIR values.
This allows us to clean up the DESTDIR logic in testcase.prf,
which was completely busted. Doing the two in separate commits
is unfortunately not possible as the old testcase.prf logic
was so broken it would barf if only looked at.
Change-Id: Ibf21216195c760ee46ae679c162b207b77a9d813
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
When outputting the deployment settings on Windows, the paths might
have backslashes. These need to be escaped, otherwise they will simply
be removed by the JSON parser (or converted into whatever they happen
to represent given the neighbouring character.)
Task-number: QTBUG-33926
Change-Id: I11f1bc7d1f8082c73329bdc02fb8d653a0b5c0ee
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Whenever the SDK updates the build tools it's put inside a new
subdirectory with the version number, so with every new version
we would have to update the java.prf feature. Instead, we iterate
over the available revisions and pick the lexicographically highest
one (which is sufficient as long as the major version is
double digits.)
Change-Id: I2392ef6261ef36ed741c80fa6f981486e7844e0a
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
Without bash's pipefail option we would end up with the exit code of
grep. Since we don't know which shell the user is running, we have
to explicitly call bash.
Change-Id: Ic3f6db0af9bb90a58001ccfbf9d6d21b6c9c9634
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
A common problem is that examples and other apps are unusable on
Android when they are inside the Qt directory. There doesn't
really seem to be any good reason for having a special case in
place, since this will only affect applications which are not built
with the host toolchain, and we aren't building any command line
apps for the target devices. So the only thing this will affect are
the examples and we want those to be installed into the correct
path.
Change-Id: Ibae365e06eb77944f11e596c16c3c5baf798848c
Reviewed-by: BogDan Vatra <bogdan@kde.org>
We need to output integers here, since these are interpreted
as integers when reading the json.
Change-Id: I4206b3ac347b61a357bd2658f146979e06690141
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
By referring to crt.o by $(SDK) we allow Xcode to switch between the
iPhoneSimulator and the iPhoneOS SDKs.
Change-Id: I33d9f30b2f5a8f085dc4ddfc6e2ef228d02d639c
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
When warnings are treated as errors, no Android code will
compile, since one of the platform headers in the NDK triggers
the literal-suffix warning. So we need to mark this as no-error.
Change-Id: Icabf1c2f2d32f76ee157d04e62a28f83abeed8f1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If you specify ANDROID_API_VERSION to override the default
API versions used for building the jar files, this should
take precedence even when the .pro files specify a different
default API version (like QtAccessibility does when it sets
the default to android-16.) Otherwise it's impossible to
override these defaults.
Change-Id: Idef98aaf3b51490bd7ced8c53770ee2f5680b1db
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
Reviewed-by: Christian Stromme <christian.stromme@digia.com>
Various global changes, primarily preprocessor flow, to support the
WinRT platform.
Change-Id: I3fa9cf91d5fb24019362e88fcf205e31b4f810b5
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
This outputs a json file with the necessary settings from qmake
so that an external build tool can easily get the settings without
having to parse the entire .pro source. Used by the androiddeployqt
tool.
Task-number: QTBUG-32856
Change-Id: I5d3ac0ab6a0350162d06b0a0bf0c9bcbd90d8b5a
Reviewed-by: Daniel Teske <daniel.teske@digia.com>
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
