This commit fixes two bugs:
1) Two ranges should not be merged if they are of different columns.
The old code would have merged (0,0) with (1, 1). Tranforming a selection
of just two indexes in a rectangle of four indexes.
2) The QItemSelectionRange appended had wrong column and worked only for
indexes of the first column. For example if 'tl' was (0, 1) than br was (0, 1)
so the QItemSelectionRange would have be ((0,1), (0, 1-1)) so ((0,1), (0,0)).
This QItemSelectionRange is invalid because topLeft columns is greater than
bottomRight column. The fix take in consideration the bottomRight column.
Task-number: QTBUG-58871
Change-Id: I591ef0bcc63926f24a7b1ced002af9b7737a4b6e
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
With the right guards for isContentView() we can use m_view.window
directly. The only instances left of m_nsWindow are during window
creation, which will be removed in a followup.
Message send syntax for reading or writing Objective-C properties
has been replaced with dot syntax where appropriate.
Change-Id: I86925753612516625c93ea5bbedc98a3ddd8fec4
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
And unify all of them to use regular pointer check syntax, to stay
consistent with other uses of non-smart pointers.
Change-Id: Ic55d7a16f2010120aaa8eac5b2df8189490671a2
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
It was backwards from the expected value, consistently on iOS and xcb.
It was already that way in 5.6, and we don't document which way
is clockwise. So it seems to be just the example which is wrong.
Change-Id: Ibbdadc2ae240017abc87439a2694fb5fbd3d07f8
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Each stroke is a polygon (quadrilateral) connecting the previous
tablet event point to the current one. Previously we used the same
width for both ends of the stroke, so rapid changes in pressure caused
steps in the stroke width. Now it is tapered from one end to the other.
Change-Id: I909a2e85334a1a6e20fd28ee4babf6825da36612
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Some AMD cards have been reported to not update otherwise.
Task-number: QTBUG-60527
Change-Id: I84d57a57eb2b76fb31255ae42b79b96ab7b257c9
Reviewed-by: Kimmo Leppälä <kimmo.leppala@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
The conditions checked are compile-time conditions anyhow.
Simplify or strenghten a few conditions while at it.
Change-Id: If07f2aedca4c3632d852a8fdb2b3f7eb55a96c93
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: James McDonnell <jmcdonnell@blackberry.com>
prefix it to the purpose field. this makes the presentation more
consistent with the graphical tool, and avoids the need to be redundant
in the description.
Change-Id: Iea58885637e0518aa1ec2f69ff05090b7e1e77a9
Reviewed-by: Stephan Binner <stephan.binner@basyskom.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The m_nsWindow member both indicates whether or not the QCocoaWindow
represents the content view of a NSWindow, and provides access to that
NSWindow. The former is better expressed through isContentView(), which
allows us to then replace m_nsWindow entirely in a followup with access
though m_view.window, removing the need to cache the NSWindow.
Change-Id: I6e7de4b6d64b29fc9023222be045254f18be28cd
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Backtrace logging tests were not passing for arm when -O2 option was used.
Set "-fno-inline" on for the app whose backtrace is to be inspected.
Task-number: QTBUG-59966
Change-Id: Id1bbf78c31dc524357a30c7d39c239689621b155
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Any objects directly or indirectly autoreleased in main(), before we start
the event loop, will never be released, as there are no pools present yet.
This includes all resources allocated during application and window setup,
unless those function have local pools. Ideally that setup code would be
called from within the runloop callstack, where there is a pool present,
but that requires a new main/startup-API for Qt.
To aid in debugging object ownership and hierarchies within Qt, we set up
our own root level pool tied to QApplication, which ensures that most objects
autoreleased in main() will eventually be released and have their dealloc
methods called.
The feature can be disabled by setting an environment variable:
QT_DISABLE_ROOT_LEVEL_AUTORELEASE_POOL=1
Combined with OBJC_DEBUG_MISSING_POOLS=YES, this allows breaking on the
function objc_autoreleaseNoPool to weed out codepaths in Qt that should
have local pools.
Change-Id: Id02e1edaaaeaa04c53862d7228e519214c99ab51
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
ProtocolInvalidOperationError are meant for actual replies from the
server indicating that the operation is not valid (HTTP 400 Bad
Request).
Change-Id: I9ad33fff8b634979bdbafffd14bbc57e4b21d6bf
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The QMimeType class can be quite useful to graphical QML applications,
especially on the desktop.
[ChangeLog][QtCore][QMimeType] Add Q_GADGET, so that QML applications
can make use of QMimeType's properties and methods.
Change-Id: I03e6e82062558a72f5b97e65bbddfc4b7470e735
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Jeremy Katz <jeremy@panix.com>
Reviewed-by: J-P Nurmi <jpnurmi@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
They're deprecated since C++11 and removed in C++17.
Change-Id: Ia2acd9312707bfee96838743645a04ae1780e5dd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Clients don't (or shouldn't) care if a selection clipboard is supported
for instance. They should just try to use it. There's nothing they can
usefully do if the platform doesn't offer a selection clipboard (like
Mac).
Change-Id: I0adb79766807806a4754353b48e33ed8acf9100a
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
The definitions of size_t and ptrdiff_t ([support.types.layout] p2 and
p3 respectively) do not specify that they need to be as big as a
pointer. They just need to be big enough to hold the size of the largest
object and the biggest array subscript, respectively, the platform
supports (e.g., 16-bit DOS would have them as 16-bit in all memory
models, except huge).
But we depend on them actually being the size of a pointer in many
places, such as in QArrayData::offset, that stores the linear distance
from the end of the structure to the beginning of the data, wherever it
is in memory.
It's also a good idea to verify that qptrdiff and qssize_t are the same
type.
Change-Id: I9ad33fff8b634979bdbafffd14bbd1223afc58e8
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
QRingBuffer::read() implements the same loop.
Change-Id: I480fe07e2400dfaee560f22bdbf07d6cdd013eb2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This patch implements an iterator that returns a pair containing both the
key and the value of an entry in QHash/QMap.
[ChangeLog][QtCore][Containers] Added an stl-like iterator to go through
QHash/QMap returning both the key and the value of the element pointed to.
That lets QHash/QMap interoperate better with stl's algorithms like
std::set_union.
Change-Id: Idbf8a8581510b3493648c34ab04c556de9fa4aa7
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This variable was introducing during Qt 5.0 Q{Gui}Application
refactoring days (2011 or even before) and since then has been
used interchangeably with QGuiApplicationPrivate::mouse_buttons.
This patch removes the duplicate member variable as it is
redundant and could be a source of potential errors.
Initially I was thinking that ::buttons might be used for
the purpose of QTestLib, but it is not. QTestLib delivers
mouse events directly via qApp->notify() (mouse button state
is update via QGuiApplicationPrivate::mouse_buttons from notify()),
or via window system interface QWindowSystemInterface::handleMouseEvent
(which goes through QGuiApplication::processMouseEvent).
Looking at QGuiApplication, it is clear that ::buttons
and ::mouse_buttons always have the same value, as there
is only one assignment to these members in QGuiApplication:
mouse_buttons = buttons = e->buttons;
And there are no other places that would assign to
QGuiApplicationPrivate::buttons.
Change-Id: Ib60d366bf056a98b15bb4538a569693e7bd022e2
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
QLocaleData::unsLongLongToString uses qulltoa, which will allocate a
zero-length QArrayData. Then with padding a single 0 was put in a
QString, which gets prepended to the result. By taking care of this
special case, we can now also fast-path the common case where base=10
and no flags nor precision was provided.
Change-Id: Ia893b0ea4c77634c24e7cef5aafb06d0ef44c507
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The existing QHash::operator== does not work when the same
keys appear in different order between the two hashes being compared.
However, relying on iteration order on a QHash is (as usual) a bad
idea and one should never do it.
Task-number: QTBUG-60395
Change-Id: Ifb39a6779230e26bbd6fdba82ccc0247b9cdc6ed
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
With disabled gui module qmake in the directory examples/gui and
examples/widgets failes with:
Project ERROR: Could not find feature opengl.
Fix this by protecting 'qtConfig(opengl)' by 'qtHaveModule(gui)' as
already done in examples/examples.pro.
Task-number: QTBUG-60488
Change-Id: Ia842124e818e8c81d41d2b8e3b8905bf1dee58ce
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Compilation and link times in CPU seconds with GCC 7, using precompiled
headers (not including moc, rcc, uic, etc. steps or headersclean):
Before After
Debug -O0 198,1 180,3
Debug -Og 240,7 229,2
Release -O3 267,1 249,2
Release LTO 239,4 229,8
QtCore required a little manual adjusting because some files are
bootstrapped into moc itself and into qmake.
Change-Id: I84e363d735b443cb9beefffd14b8b57c10e7da36
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
There's no need to derive. This fixes the build with MSVC 2017 under
/permissive-. I don't know what was wrong (ICC, Clang and GCC don't
complain), but it must be related to "Lookup members in dependent base"
in [1].
[1] https://docs.microsoft.com/en-us/cpp/build/reference/permissive-standards-conformance
Change-Id: I9ad33fff8b634979bdbafffd14bb8016f5dc98b3
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
This part has not been implemented before.
Also replace deprecated android.text.ClipboardManager with modern
android.content.ClipboardManager.
Task-number: QTBUG-58548
Change-Id: I190208042af8a6c87ed391c6c72f3f51e58dfad3
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Replace the "hard-coded" fusion_arrow.png with qt_fusion_draw_arrow()
that scales appropriately on high DPI screens.
Task-number: QTBUG-40277
Change-Id: I2c4a134de757a39d7744977bd41accff69810521
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
The sub-menu arrow indicator is still tiny. The Fusion style uses
a pre-made pixmap (fusion_arrow.png) for drawing the various arrow
indicators for sub-menus, spinboxes, combo boxes, scrollbars etc.
This will be addressed in a separate patch.
Task-number: QTBUG-40277
Change-Id: Id82c564340854e922b3b5f5bcf038ec535ed6cf4
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Change-Id: I26e8c5caca31e842adc7a09151b6de2cc17698ed
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@qt.io>
The test was disabled because it was checking if we had the right
permissions. It does seem as if the permissions do not matter as
long as everything is in process though.
As seen by the regression in fafdb171e0
it's important to run the test. This regression would have been
caught.
Change-Id: Ia1938e683badd1de2657aa6dc8a3b3bbe430e8c8
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
As the directory installation command also works with files as a source
we can unify the external commands, resulting in simpler command lines.
Change-Id: I65013626eedbdb3ce1c77ed230d46edd1603b986
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Retrieve and parse EDID blob.
Return screen product information from EDID.
[ChangeLog][Platform Specific Changes][Linux/XCB] Add screen product
information from EDID.
Change-Id: Ic54429cdc90c41342c37511bcaebce95c175f517
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
When calculating what to trim in trimmed_helper_positions(), first
trim the end, then the front.
This way, a string that consists of just whitespace will remain
anchored at its front, and we do not run into the memmove case in
trimmed_helper_inplace, which, even though there's zero elements to
move, still calls a potentially-out-of-line function (memmove()).
Change-Id: I7024ffa1f7ae2effb9c5166ec8f30a42b8d51079
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Many QMenu related functions end up calling sizeHint() which
does call updateActionRects(). Since we try not to update the
action rects if no action has changed, we must be careful to
call it the first time with the right screen geometry. Other-
wise, multi-display setups may get the action rects based on
the wrong display.
In QMenu::popup(), this can be solved by using the position
passed as argument. Incidentally, we were already computing
the right display geometry in the same function, only a bit
later. The updated position around an eventual push button
menu should not change the screen onto which the menu popup
will be displayed.
Tested with the multiscreen-menus manual test.
Change-Id: Id7fc24be6908b4a9d24b8b9c8b8006efe45d69be
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
All good (now).
Change-Id: I666773856a239826e646398a943e7df30bd81671
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
For transformations, regardless of whether they're currently
overloaded on rvalue-this or not, check the results of calls to const
lvalues as well as mutable rvalues.
Use the new mixed-type QCOMPARE more.
Change-Id: Ibaa436cd88b40e5c0823c3bbe5b04a9964e7e987
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
qtbase/src/gui/vulkan/qvulkanwindow.cpp:1882:42: error: suggest braces around initialization of subobject [-Werror,-Wmissing-braces]
VkClearColorValue clearColor = { 0.0f, 0.0f, 0.0f, 1.0f };
^~~~~~~~~~~~~~~~~~~~~~
{ }
1 error generated.
VkClearColorValue is a union, so it wants to be clear that we are
initializing only one of the union's members, apparently.
(Even though initing more than one wouldn't make sense.)
Change-Id: Id4afa3ddc1b4ce7e24e681fb93c0ee9083c41e08
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
We can't depend on QT_HAS_INCLUDE for such an important functionality in
QtQml, so detect at configure time.
alloca() is not a POSIX function (it apparently first appeared in
Version 32V AT&T UNIX), so the actual header that defines it varies from
system to system. Clearly, if alloca.h exists, that's the one, so we try
it first. On most other systems that don't define it, it's in stdlib.h.
The only exception is Windows, where it's actually defined in malloc.h.
Task-number: QTBUG-59700
Started-by: Thiago Macieira <thiago.macieira@intel.com>
Change-Id: Icd0e0d4b27cb4e5eb892fffd14b4b2b389a4684e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
