Instead of lumping both Objective-C (.m) and Objective-C++ (.mm) sources
into the same pile, passing them on to the same compiler as for C++ (CXX),
with the C++ flags (CXXFLAGS), we follow Apple's lead and treat them as
variants of the C and C++ languages separately, so that Objective-C
sources are built with CC and with CFLAGS, and Objective-C++ sources
with CXX, and CXXFLAGS.
This lets us remove a lot of duplicated flags and definitions from the
QMAKE_OBJECTIVE_CFLAGS variable, which in 99% of the cases just matched
the C++ equivalent. The remaining Objective-C/C++ flags are added to
CFLAGS/CXXFLAGS, as the compiler will just ignore them when running in
C/C++ mode. This matches Xcode, which also doesn't have a separate build
setting for Objective-C/C++ flags.
The Makefile qmake generator has been rewritten to support Objective-C/C++
fully, by not assuming that we're just iterating over the C and C++
extensions when dealing with compilation rules, precompiled headers, etc.
There's some duplicated logic in this code, as inherent by qmake's already
duplicated code paths, but this can be cleaned up when C++11 support is
mandatory and we can use lambda functions.
Task-number: QTBUG-36575
Change-Id: I4f06576d5f49e939333a2e03d965da54119e5e31
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
these were necessary to suppress the appending of the qt major version
to the library name when reading .prl files. this has outlived its
usefulness, as the .prl files now contain the full library name.
additionally, the overrides would break the use of qt if the .prl files
were not shipped, as zero lost its special meaning as "none".
Change-Id: I9f028c17fc0428cb546a4a26ee209febff32da5e
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
make sure that all specs define QMAKE_{PREFIX,EXTENSION}_{SH,STATIC}LIB,
and adjust the code to make halfways consistent use of these variables,
in particular on windows; Win32MakefileGenerator::getLibTarget() is gone
as a result, as is QMAKE_CYGWIN_SHLIB. still, tons of hardcoded "lib"
references remain in the unix generator, because no-one cares.
Change-Id: I6ccf37cc562f6584221c94fa27b2834412e4e4ca
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
This is a leftover from the unsupported Windows Phone 8.0 mkspec.
Change-Id: Ibcf11e131a3cb098960410dbd683eb5950b0c5ad
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@theqtcompany.com>
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
When cleaning in Visual Studio then it will remove all instances of tmp
files which meant it would remove the mocinclude.tmp as well incorrectly.
Therefore the extension of the mocinclude file needs to be changed to .opt
so that it is left untouched by Visual Studio.
Change-Id: Iebc055f33f9dc87a4fa42ae87b253f6739903e8f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
These variables were defined but never used in the respective qmake
features. Utilizing them allows more control over the output file name.
Change-Id: I5ba96c5cd330b18dc060f563186992fe3bd27b49
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
I've tested with Clang 3.7 and ICC 16 on Linux, XCode 6.4 on OS X for OS
X (not iOS).
Change-Id: Ib306f8f647014b399b87ffff13f1f4291d801a20
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
there is no particular reason to have them in qt_functions.prf any more,
while the separation made the code harder to follow.
Change-Id: Ie44c9784358f382f7bc863b421ff5b440211d66f
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
there is no particular reason to have it in qt_functions.prf.
Change-Id: I88ed1ea937a9a88a4625a6de7bcd3a29957560da
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
the addition of qt's rpath belongs into qt.prf - even on mac.
so consolidate the two implementations.
as a nice "side effect", we get relative rpaths also on linux.
another "side effect" is that we don't unnecessarily add the qt rpath to
qt modules also on linux.
the qt rpath addition mechanism should not be responsible for setting
the policy who gets a relative rpath, so move the logic to higher-level
callers.
Change-Id: I52e8fe2e8279e7b1ac25fae758867a5cb1cafcf8
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
the rpath applies only to the installed on-device location and is
consequently always the same for all modules, so there is no point in
indirections.
Change-Id: Ia0590552aa317d799a2d3879fd0c0768344b9645
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
this variable is not referenced anywhere else.
Change-Id: Ib4d0a47a08d029f65542e752fa2a47c992e061fa
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
the old plugin loader which test-loaded plugins (without their
dependencies) is gone, so the hack is obsolete.
Change-Id: I68077cb58174dfbcb0b5372e2574de41f48d35c9
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
ppc/ppc64 and 32-bit x86 have been dead for a while.
consequently, the legacy macx-g++-64 spec was most probably not used.
which in turn meant that NATIVE_64_ARCH was never set (in particular on
windows hosts ...), which means that the android ndk host auto-detection
was effectively broken.
the arch code in mac/default_post.prf was also never triggered, so nuke
it as well.
Change-Id: Ic0775e40b273a22e0a15808cac328e0df33c2155
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The use of ccache leads to QMAKE_CXX definitions of the form:
QMAKE_CXX = $${CCACHE} $${CROSS_COMPILE}g++
The previous test required QMAKE_CXX to be a single valid (absolute or
QMAKE_PATH_ENV-relative) path to an existing file, which was not
compatible with definitions of QMAKE_CXX like the one above.
Fix this by using only the first value in QMAKE_CXX, which usually
points to the compiler executable, or to the ccache executable in the
above case.
Task-number: QTBUG-47951
Change-Id: Iade3136f03493593b067fb7742fb997f92377425
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Inside Visual Studio these files (INSTALLS) will end up in deployment.
They do not make sense there and might even cause clashes, which prevent
the project file from being loaded (for example when a qrc file is added
to "Resource files" and "Deployment files")
Change-Id: Ifa68c52a83b2bf3948738c7aa1cf9c56b331dc80
Reviewed-by: Andrew Knight <andrew.knight@intopalo.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
This linker script is only enabled for systems with GCC or GCC-like
compilers, though technically it should work on the BSDs too (will
enable after testing). For regular modules, this declares one ELF
version "Qt_5" and places all QtCore symbols inside, then it declares
unused ELF versions "Qt_5.x" for each older minor release. For modules
declared "internal_module", all symbols are placed in version
Qt_5_PRIVATE_API.
The big advantage of an ELF version is that, when we do Qt 6, both
versions of QtCore could be loaded in memory without conflicts and all
symbols would be resolved to the correct library. No module can talk to
both at the same time, but this avoids mistakes of loading them
indirectly by plugins.
The extra Qt_5.x versions will be used in the next commit.
Change-Id: I049a653beeb5454c9539ffff13e3fe6f050fdf31
Reviewed-by: Lisandro Damián Nicanor Pérez Meyer <perezmeyer@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][General Improvements] Qt's buildsystem now detects whether
the compiler supports C++14 and experimental support for C++1z. If the
compiler supports it, then Qt is automatically compiled using that
support.
\
This does not apply to user applications built using qmake: those are
still built with C++11 support only. To enable support for C++14 in your
application, add to your .pro file: CONFIG += c++14 (similarly for
C++1z).
Change-Id: Ib056b47dde3341ef9a52ffff13ef1f5d01c42596
Reviewed-by: Lars Knoll <lars.knoll@theqtcompany.com>
We need to move adding ucrt(d).lib out of the various qmake.conf as
qmake.conf is only parsed once by qmake and does not differentiate
between debug and release.
Hence use default_pre.prf which is the earliest prf to use. This one
also is being parsed multiple times and does what it is supposed to do.
This allows API certification tests for Win10 to suceed, another
sideeffect is that it is much cleaner at a single location now.
Change-Id: Id899f4bbd063a3191c8f139857abf90efa827ffc
Reviewed-by: Andrew Knight <andrew.knight@intopalo.com>
So far the dependency keyword has been ignored for the new Windows 10
mkspecs. The difference to older manifest files is that there is already
a <Dependency> section and hence we embed dependencies inside this one,
as the format standard does not allow to have multiple of those.
Change-Id: I1bf25979cc28d5c153215de5bb9cd6f37e9c50aa
Reviewed-by: Andrew Knight <andrew.knight@intopalo.com>
This enables to create fully functional packages from the output of
'nmake install'.
Change-Id: Ief83532cdfc4575f7c42f5bb6a3cee4c9f0ecbd3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Since libstdc++ builds on OS X and QNX 6.5 are no longer supported,
simply require <initializer_list> and std::move in order to claim C++11
support works.
The minimum OS X versions need to be fixed elsewhere.
Change-Id: Ib056b47dde3341ef9a52ffff13ef1d2ac3923f5c
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Reviewed-by: Rafael Roquetto <rafael.roquetto@kdab.com>
lex.prf was trying to be halfway between the standard POSIX lex
requirements and those of GNU flex. So fix it to work with both, more or
less, by noticing when lex is actually flex and using the extended GNU
options. Note that POSIX lex is untested and may still not work.
Change-Id: Ib306f8f647014b399b87ffff13f1e8e43fb68b3c
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
yacc.prf was mostly working, so this commit simply makes it slightly
better by using the -p and -b options that POSIX requires and avoid
having a common intermediate file.
Change-Id: Ib306f8f647014b399b87ffff13f1e8e74ad4db1d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Prefer -std=gnu++11 unless strict_c++11 is defined. You can enable
strict C++11/C++14 mode by using
CONFIG += strict_c++
That is enabled for Qt's own code, so we we don't accidentally use GNU
extensions in portable code.
There's no support for strict C++98 mode (that is, the -ansi option).
[ChangeLog][qmake] By default, GNU extensions are now enabled with
Clang, GCC and ICC even in C++11 and C++14 modes. To disable the GNU
extensions, add to your .pro file: CONFIG += strict_c++.
Change-Id: Ib056b47dde3341ef9a52ffff13ef14de2169bef5
Reviewed-by: Kai Koehne <kai.koehne@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Conflicts:
src/plugins/platforms/cocoa/qcocoafiledialoghelper.h
Manually fixed src/testlib/qtestcase.cpp to return the right type.
Change-Id: Id1634dbe3d73fefe9431b9f5378846cb187624e4
Commit 3ce99adf replaced DEPLOYMENT with INSTALLS and introduced
the "install target not created" warning when running qmake on
WinRt projects.
The code path in qt.prf that was responsible for filling the
DEPLOYMENT variable was never functional in Qt5. We're turning
the code path off until this is properly fixed.
Change-Id: If836ef648f9fb601b7597d39e3d00665d4cf01b0
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
There is no test for gold linker and new dtags support for the host build
(only for the target compiler/build) which leads to trouble in some cross
compiling environments (see [1] for details).
So disable gold linker/new dtags support unconditionally for host builds.
[1] http://lists.busybox.net/pipermail/buildroot/2015-May/128303.html
Task-number: QTBUG-46125
Change-Id: Ic62828704dcce461487d63860705158cce3e4af8
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
On Windows, we set VERSION for QML plugins, because this embeds a
VERSIONINFO resource into the DLL that can be inspected by the user.
Change-Id: Ifb42efed6ceee05d05f61a271e028776cac6a3a2
Task-number: QTBUG-46473
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Deprecate the qmake variable DEPLOYMENT that was used for installing
files on remote devices for Windows RT and Windows CE Visual Studio
projects. Use INSTALLS for both nmake and Visual Studio projects.
[ChangeLog][core][qmake] Deprecated the qmake variable DEPLOYMENT in
favor of INSTALLS.
Task-number: QTBUG-21854
Change-Id: Ia9d2c69feb7d87b0b9dc69ff7c0a68be35a57acd
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
... by implementing a fake ln in qmake.
symlinks are supported only since vista (we officially still support
xp), and even there are permission-restricted (MS being (rightfully)
afraid of symlink attacks). so we fake the links by copying the files
instead.
the previous hack was a bit naive, simply using cp/copy instead of ln.
this didn't work with relative paths, as real symlinks are resolved
against their parent directory, not the working directory of the "ln"
command. the new fake does this correctly.
Change-Id: Ia2f5d68a39d6ffcc8a4383f9d0fc63a9da0a05c3
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Check for a valid license not only in configure, but also in qmake.
To limit the runtime overhead we cache the day of the last run in
a .stash file. This allows us to run licheck only for the top-level
qmake call, and only once per day.
This requires an updated licheck executable that supports the new
check mode.
[ChangeLog][Tools][qmake] For commercial builds, qmake now checks for
a valid Qt license. This requires setting up a Qt Account (or
.qt-license file) on the development machine.
Change-Id: I2c2a05a4602cc661560568b76ddf520cb8134769
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
The makespec inits QMAKE_LFLAGS_PLUGIN to the same as QMAKE_LFLAGS_SHLIB,
which will create a dynamic library by passing -dynamiclib. The advantage of
creating a proper bundle (MH_BUNDLE) instead of a dynamic library (MH_DYLIB)
is that bundles can be unloaded completely by the host application.
Change-Id: I03b39b704c09213f40a4cb84f5794bf6b3669fc0
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
As the defines looked like -DQT_TESTCASE_BUILDDIR=""C:\..."" compilation
from Visual Studio (vcxproj) failed due to the two quotation marks at
the beginning/end of the actual path. So for the vc(x)proj we do not use
shell_quote but add the quotes manually.
Change-Id: I186258d82a56928cd0316bff1ec9f60147044165
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Standalone files are added by using RESOURCES += file.txt, while
collections of files are defined as collection.files = f1.txt f2.txt
and then added using RESOURCES += collection. For collections a prefix
can also be set using collection.prefix = /foo. The standalone files
are not prefixed.
Change-Id: I8236808238414da05e744f799a1bb15a72f4a46f
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Defaulting to absolute_library_soname on configure -rpath is no longer
necessary as now we support @rpath install name ids on OS X and iOS.
This also sets QMAKE_SONAME_PREFIX to @rpath for Qt modules when built
with rpath configuration.
This makes Qt libraries relocatable on OS X. Qt SDK is not yet
relocatable though, because plugin locations (including cocoa plugin)
are still resolved using absolute path (see QTBUG-14150). Also, there
are several absolute paths hardcoded in qmake mkspecs pri files.
Task-number: QTBUG-31814
Change-Id: I36b9384cd69ac609608acbe2b3d5e0512317e0d6
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
there is no need to make exceptions for install targets now, so instead
of abusing qt_no_install_library, introduce a new header_module flag.
Change-Id: I4ad7e301d1b60938b17e1dea732b1dbe3ff88a1a
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
this allows LD_LIBRARY_PATH to take precedence over the hard-coded
rpath, which is the only sane thing to do (which is also why i'm not
adding an option to disable it).
this behavior is consistent with non-linux systems.
the windows version has no auto-detection, just like for gold linker
usage.
Task-number: QTBUG-3069
Change-Id: Ief9ba032291c898d75d76ecc740390954382a804
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
CMake INTERFACE targets may only have whitelisted properties, and
FRAMEWORK is not in the whitelist in released CMake versions.
Change-Id: I27cd0cfbe1b52f25c91bf1b3c0d55879bed91bdf
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Stephen Kelly <steveire@gmail.com>
this makes the distclean targets work throughout qt.
the dreaded confclean target is aliased to distclean.
Task-number: QTBUG-8202
Task-number: QTBUG-20566
Change-Id: I7ac8e3b5b0110825dc93e4fa885281db91c6cf83
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
automatically set TEMPLATE=aux if qt_no_install_library is set.
Change-Id: Iccceda468da762b181fdd5c8e511bf6ed19af599
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
just like in qt_plugin.prf, the DESTDIR setting is actually fixed per
module type.
Change-Id: I5837b5884699f0d50e4067733af8aacbab93bc42
Reviewed-by: Stephen Kelly <ske@ableton.com>
As these are a new type, there is no legacy code to support.
Change-Id: Ie5abd353563d68d0449a07e06065f34db805f710
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
there is neither a point in building a PCH that will never be used, nor
does it even work with the aux TEMPLATE.
Change-Id: I2fe11f951f81adf5e15066ed60f983003c76b451
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
automatically append the .exe extension. this is done unconditionally,
which means that providing it in the spec is wrong by definition.
don't use system("which") (which won't do what we want in a windows
shell), but scan PATH ourselves. as a bonus, this is also faster.
to avoid fetching and splitting the path multiple times, factor out a
function in spec_pre.prf.
Change-Id: I95f0fa285c158b347d45422111f91540e3a595fd
Reviewed-by: Jochen Seemann <seemann.jochen@gmail.com>
Reviewed-by: David Schulz <david.schulz@theqtcompany.com>
Test each include file directly, instead of doing a large #include. This
verifies that each header is compilable on its own. One big advantage of
doing it via a special compiler in qmake is that we skip pre-compiled
headers, which has hidden build errors in the past.
This solution is implemented by making syncqt produce a second list of
headers. This list is the same as the list of headers in the source
code to be installed, minus the headers that declare themselves to be
unclean, via the pragma:
#pragma qt_sync_skip_header_check
This mechanism is applied only for public libraries (skipping
QtPlatformSupport, an internal_module).
This test is enabled only for -developer-builds of Qt because it
increases the compilation time.
On QtTest: the library only links to QtCore, but it has two headers that
provide inline-only functionality by including QtGui and QtWidgets
headers (namely, qtest_gui.h and qtest_widget.h). If those two modules
aren't getting compiled due to -no-gui or -no-widgets to configure, we
need to remove the respective headers from the list of headers to be
checked. If they are being built, then we need to make QtTest's build
wait for the headers to be generated and that happens when qmake is
first run inside the src/gui and src/widgets directories.
Change-Id: I57d64bd697a92367c8464c073a42e4d142a9a15f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Require CMake 3.0 if an attempt is made to use a cmake file containing
an INTERFACE library.
If the user is using a CMake version older than 3.0, then exclude INTERFACE
libraries from dependencies of Qt modules. The Qt CI system is running
CMake versions as old as 2.8.11, which makes that the current minimum version.
The only header-only module existing so far is the QtUiPlugin module, which
has been split out from the QtDesigner module. If using CMake 2.8, the
forwarding headers in the QtDesigner module will be used, and the effect
of the split out library will not be seen. If using CMake 3.0, the
split out library is listed as a dependency and its transitive usage
requirements such as the QT_UIPLUGIN_LIB definition are made available.
Change-Id: Iecee3bbc440842dca27dc067f2a31e3526efa01b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
We have configure -headersclean now
Change-Id: Iaf576b16d7c756a08ec5c3dfa32deaa343e5e029
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
This aligns with Chromium branch 2356.
This version brings more complete OpenGL ES 3 support as well as various
bug fixes and performance improvements.
The following changes were made to earlier patches:
-0000-General-fixes-for-ANGLE-2.1
Removed. All changes are now handled elsewhere.
+0001-ANGLE-Improve-Windows-Phone-support
Consolidated remaining parts from 0009/0010.
+0002-ANGLE-Fix-compilation-with-MinGW
Remaining issues from patch 0016.
+0003-ANGLE-Fix-compilation-with-MSVC2010
Remaining issues from patch 0015.
+0004-ANGLE-Dynamically-load-D3D-compiler-from-list
Renamed from patch 0008.
+0005-ANGLE-Add-support-for-querying-platform-device
Renamed from patch 0013.
-0004-Make-it-possible-to-link-ANGLE-statically-for-single
Removed. Fixed by adding defines to project files.
-0008-ANGLE-Dynamically-load-D3D-compiler-from-a-list-or-t
Renamed to patch 0005.
-0009-ANGLE-Support-WinRT
Removed. Mostly fixed upstream; remaining parts in patch 0001.
-0010-ANGLE-Enable-D3D11-for-feature-level-9-cards
Removed. Mostly fixed upstream; remaining parts in patch 0001.
-0012-ANGLE-fix-semantic-index-lookup
Removed. Fixed upstream.
-0013-ANGLE-Add-support-for-querying-platform-device
Renamed to patch 0005.
-0014-Let-ANGLE-use-multithreaded-devices-if-necessary
Removed. No longer needed.
-0015-ANGLE-Fix-angle-d3d11-on-MSVC2010
Moved remaining parts to patch 0003.
-0016-ANGLE-Fix-compilation-with-MinGW-D3D11
Moved remaining parts to patch 0002.
-0017-ANGLE-Fix-compilation-with-D3D9
Removed. Fixed upstream.
-0018-ANGLE-Fix-releasing-textures-after-we-kill-D3D11
Removed. Fixed upstream.
-0019-ANGLE-Fix-handling-of-shader-source-with-fixed-lengt
Removed. Fixed upstream.
-0020-ANGLE-Do-not-use-std-strlen
Removed. Fixed upstream.
-0020-ANGLE-Fix-compilation-with-MSVC2013-Update4
Removed. Fixed upstream.
[ChangeLog][Third-party libraries] ANGLE was updated to Chromium branch
2356 (2.1~99f075dade7c).
Change-Id: I32ccbfe95e10986bd94be7191dfd53445ea09158
Task-number: QTBUG-44815
Task-number: QTBUG-37660
Task-number: QTBUG-44694
Task-number: QTBUG-42443
Reviewed-by: Andrew Knight <qt@panimo.net>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
QT_INSTALL_LIBS is not the right place to check for Qt dlls, as they
cannot be found there in a non-developer build. In order to be able
to find the dlls and make adding dll locations easier for the user,
QMAKE_DLLS_PATHS was added. On Windows, the variable points to Qt's
bin directory by default.
Task-number: QTBUG-44960
Change-Id: Ie4e5beeaadee798a055599387e842d7c0502c27a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Dependencies to all header files generated by dumpcpp are now added to
every object file. This fixes parallel builds of projects that use
TYPELIBS.
Change-Id: I3c0456c7b182a42296ec6999aa86d1293ffd2e42
Task-number: QTBUG-45118
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Applications built using the regular makefile generator also need to
link to XCTest, as the library is referenced from qxctestlogger.mm
Change-Id: Iedbb5c6a2811fd904d75abc20f4e39440e44e748
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Will be active when running test apps through Xcode's 'test' action,
and reports QtTestLib test objects and functions to Xcode as XCTest
cases.
This allows running tests on both iOS Simulator and iOS devices from
the command line, through xcodebuild, without relying on any 3rd party
tools. It also integrates Qt test failures and passes into the Xcode
IDE, which may be useful for closer investigation of test failures.
The feature is limited to Xcode 6.x.
Change-Id: I33d39edbabdbaebef48d2d0eb7e08a1ffb72c397
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
while every "real" module has private headers, a very small headers-only
module could reasonably have none. entirely hypothetically, of course. ;)
Change-Id: Ib51a66858fb7d62f45fe2928625c25aa1ffc2827
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
they have no library to link against, obviously.
Change-Id: I721670382c1ec56e19130f0a0ecef616e101b885
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
To make echo hide all the commands of making the debug file it needs
to use && to separate commands instead of newline.
Change-Id: I6c9b408b897a285b769a402fa4d923c110334504
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Since quoting was fixed, separate debug info has no longer installed
correctly because it relied on executing shell commands in the target
name.
This cleans up the generation and installation of separate debug info
by using resolve_target.prf.
Change-Id: I3ee47c0e4dc3de600c42f56b17315a69925c4724
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
When building a module for the first time the paths won't exist as they
are only created when you run "make". However, if you run qmake with
'-r' you need the compiler flags to be available already before that.
Task-number: QTBUG-43175
Change-Id: Ib784c432f29bb8c62b9ef23e59ccb515e1d96f28
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
We now have support for more complex exclusive builds configurations,
e.g., on iOS with simulator and device configurations, so we can't hard
code the logic for choosing the right exclusive build to test.
Change-Id: I358687b297b7bf1eb28eef0ef0aaf44b89860404
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
It's pretty easy to forget to run qmake from a vcvars prompt. Doing so
causes the UUID to get persistently written as empty, breaking the
vc project.
Change-Id: I5badb31ad4f606abbe8c71979019e097c748e07a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Peng Wu <peng.wu@intopalo.com>
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@theqtcompany.com>
Support statically linking the MSVC/mingw runtime libraries without
manually tweaking mkspecs. This is helpful for projects like the
installer framework.
MSVC does not support mixing MT[d]/MD[d] flags in different
compilation units. The static_runtime option is therefore added
to both QT_CONFIG and CONFIG.
Change-Id: Ifd6dc9c362090457de8e2c62477d0445f9479722
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
it makes no sense to let every spec do that separately, as it's fixed
by the generator+shell.
putting it into a file which is loaded regardless of the spec also
allows us to remove the hardcoded fallbacks from qmake.
if somebody overrode the values in their spec for some weird reasons,
they'll need to override spec_post.prf.
shell-{unix,win32}.conf are now dummies and print warnings.
Task-number: QTBUG-37269
Change-Id: I66c24fb4072ce4d63fdbfc57618daa2a48fa1d80
Reviewed-by: Jochen Seemann <seemann.jochen@gmail.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Change-Id: I2e58c22301a433208718c26b362b4dda2b891f0e
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
If the user adds CONFIG+=bundle and doesn't set QMAKE_BUNDLE_EXTENSION,
we interpret that as a request to generate a test bundle.
Change-Id: Id4fbb64d39cddd6f95ac641a910a9d5543c30daa
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
the function is used in our examples and code generated by qt-creator,
so the qt5-specific magic behavior is inappropriate. create a separate
function instead.
Task-number: QTBUG-44595
Change-Id: I4d72cc1e5cbfc274b3210520baa213f4c5479ca9
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Due to common subexpression elimination instruction set extensions may
leak from the objects where they were enabled when doing link-time
optimizations.
To avoid that this patch disables LTCG/LTO on files built with extra
instruction set extensions.
Change-Id: Ie34ad900be7fb04a0dc4d3562187ee170c183333
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
VS expects references to $(TargetPath) to be quoted by the user.
Task-number: QTBUG-25030
Change-Id: Ib5a07730836a42533d5488882e877074ccceea4c
Reviewed-by: Prasanth Ullattil <prasanth.u@gmail.com>
spaces in the source dir are not supported for now, as that requires
some more profound refactoring of the bootstrap makefiles.
Change-Id: Ie0c07a1558b8326f642f2ea144bc1cd85ee761af
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
clearly, it's not very useful if nobody noticed it yet. anyway ...
Change-Id: Ieef1593e42031f8c17a3d7e9e67e3194ded9c066
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
Qt copyrights are now in The Qt Company, so we could update the source
code headers accordingly. In the same go we should also fix the links to
point to qt.io.
Outdated header.LGPL removed (use header.LGPL21 instead)
Old header.LGPL3 renamed to header.LGPL3-COMM to match actual licensing
combination. New header.LGPL-COMM taken in the use file which were
using old header.LGPL3 (src/plugins/platforms/android/extract.cpp)
Added new header.LGPL3 containing Commercial + LGPLv3 + GPLv2 license
combination
Change-Id: I6f49b819a8a20cc4f88b794a8f6726d975e8ffbe
Reviewed-by: Matti Paaso <matti.paaso@theqtcompany.com>
these reflect the on-target paths (unlike /raw, which are host paths, just
without the -sysroot). this is necessary for anything deployment-related,
starting with RPATH.
Change-Id: I13d598995d0e4d6cb0dc1fc7938b8631cf3e3a95
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
pkg-config .pc files use the raw target paths (and pkg-config patches up
-I and -L flags on the fly), so these files were actually already fine.
libtool .la files use the magic prefix = to denote the sysroot.
this works only with libtool 2.4+ (sept 2010).
qmake .prl files have no built-in sysrootification magic, but as they are
read by qmake, it's possible to put property references into them. this
makes them relocatable, both inside and outside sysroots.
Change-Id: I97236ac81e7aba4e4771d14a44cbf59144cc2d3e
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
for sh, this is usual quoting.
for cmd, this means escaping closing parens - everything else is permitted
anyway.
Change-Id: I1179849d95f1f1f9e4b0d62ecd88917a1327f60f
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
prepend the 'cd' command only after prepending the variables, as
otherwise they'd apply to the cd command only.
Task-number: QTBUG-44183
Change-Id: Ibf96a16ce2c9cd9c0e80ca3cd5433e64ec19b136
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
We need PIE, doesn't matter if reduce_relocations is used or not
Change-Id: I9a359b9d4443a6059980cd4c48058132ec4267fe
Reviewed-by: Simon Hausmann <simon.hausmann@theqtcompany.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Naming for different logo sizes on WinRT has been varying in the
past and evolved from using small/medium/large to some being
explicit (71x71).
Add new values introduced by 8.1 (310x150, 310x310,...) and clean up
mixed usage. Detailed pixel versions overrule general specification
and latter ones stay mostly for compatibility reasons. Still the
preferred way is to use explicit pixel values.
Task-number: QTBUG-43644
Change-Id: I9173ec2951a82e5eac9d8c9956bfb0bb4d1a2459
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
By using the special "ar" and "ranlib" tools, the symbol table is made
visible, so we don't need fat LTO binaries. Since we need to store the
new tool names, we may as well clean up ltcg.prf with variable names for
the fat mode too.
Change-Id: I7e53af0c74a3d069313f38500b72538af1d61128
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Instead of trying to load in ltcg.prf and cache the value.
Change-Id: If485ff68fc6ff9d9cf7009cd72d5e702d0199c7f
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Currently you could only invoke windeployqt for debug and release
builds, but not windeployqt_clean resulting in artifacts after
the clean step.
Change-Id: I3a93e4909a017f3594cc5b0c2249ed25b777c008
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Reviewed-by: Andrew Knight <qt@panimo.net>
Glibc will use the intrinsics for 32- and 64-bit, but didn't for 16-bit
(probably because GCC didn't document it until version 4.8), so this
commit will make us access the intrinsics directly the intrisincs for
all type sizes.
Additionally, this will get us access to the compiler intrisics even
without Glibc, such as when building against uclibc or Bionic.
Another benefit is that both Clang and ICC will use the MOVBE
instruction on Atom and Haswell architectures.
Change-Id: I39d1891f479887d719d69ebe4ac92ac9bfeda8af
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@theqtcompany.com>
Since QtWebKit started using stabs on some platforms to reducing
memory pressure during linking, the tricks to strip out debug-info
in the internals no longer worked because no-debug-info doesn't strip
the -gstabs compiler and linker flags.
Change-Id: I151088f29058b8fe50cba9aa3ec8ecd84b85d7d8
Reviewed-by: Jocelyn Turcotte <jocelyn.turcotte@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Whenever a binary is created and linked against a static lib that was
compiled with LTCG, the final linking step requires the compiler flags
so that the pre-compiled data in the shared library can get properly
compiled.
This could happen for a static build of Qt with LTCG, but also happens
frequently for Qt's own build when linking regular libraries and
applications against QtBootstrap or QtPlatformSupport. The linking fails
when the target is a shared library (example: QtWaylandClient linking
against QtPlatformSupport).
The .prl file actually contains the "ltcg" flag, so the best solution
would actually be to process that flag there and add link_ltcg if any
dependent .prl has "ltcg", but I couldn't find out how to do that.
Change-Id: I4a75a14d1dcb8c2089a427285e25d5555df7d7d3
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Combining them could lead to intermediate builds having cached the
path, but not the version, resulting in later version checks failing.
Change-Id: Ia10f4268ce7b9e82c81627970236d68c00b80391
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
This sets the prefix for frameworks to "org.qt-project".
Applications keep using the default Xcode preferences
prefix.
Task-number: QTBUG-32896
Change-Id: I67384f643888f2de3dd8e36b9bce0f04ca4e16dd
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
The change was made too late in the 5.4.0 release
cycle, and broke the Qt build and deployment in
several areas:
- macdeployqt
- OS X 10.7 builds
- shadow builds
This reverts commit c0a54efc40.
Change-Id: I1c1ad4901228f5516352ccdfa963e8ea2b5013b6
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
This makes the 'big-data' feature introduced and made mandatory with
commit 5395180 opt-in trough CONFIG += resources_big.
Since the feature has been introduced several setups have been
found where the feature cannot be used, or not be used out-of-the-box.
Using the traditional default behavior lowers the risk of further
breakages.
Change-Id: Ifd04204adadeec539e962d6a9a6955f63781bd36
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Fawzi Mohamed <fawzi.mohamed@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@theqtcompany.com>
Ensure the sdk is of recent enough version since:
1. we build Qt with the latest sdk version, so the app needs
to do the same to avoid compatibility problems e.g when linking.
2. using a launch screen to support iphone6 depends on sdk 8
3. Apple requires apps that are pushed to appstore to use the
latest version of the sdk.
Ideally we should store the sdk version used to build Qt, and
require that apps use the same version or newer. But this patch
will do until that is in place.
Change-Id: I18b06d09c1eda15122975b7169ca7a3372df6054
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Add WINRT_MANIFEST.rotation_preference as description which orientation
is allowed or preferred by the app. Valid values for Windows Phone are
portrait, landscape, landscapeFlipped. WinRT also allows portraitFlipped
Task-number: QTBUG-40830
Change-Id: I6b11afcdb72c2c158dadddafc5d90c1d18ab9d8b
Reviewed-by: Andrew Knight <andrew.knight@theqtcompany.com>
Defaulting to absolute_library_soname on configure -rpath is no longer
necessary as now we support @rpath install name ids on OS X and iOS.
This also sets QMAKE_SONAME_PREFIX to @rpath for Qt modules when built with
rpath configuration.
This makes Qt libraries relocatable on OS X. Qt SDK is not yet relocatable
though, because plugin location (including cocoa plugin) is still resolved
using absolute path (see QTBUG-14150), also there are several absolute paths
hardcoded in qmake mkspecs pri files.
Task-number: QTBUG-31814
Change-Id: Ie9dffefcd2a946c1580293d433621c1adb7e06c4
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
This is triggered only when app is using Qt and Qt was built with "rpath"
configuration and project does not specify QMAKE_RPATHDIR explicitly.
Added rpath is made relative to app binary location if target path lies inside
Qt SDK, so all SDK bundled tools and examples will work automatically without
any changes. Tests are an exception here, since they are being run from their
build location by CI, we may not use relative rpath that work only in install
location.
Task-number: QTBUG-31814
Change-Id: I3690f29d2b5396a19c1dbc92ad05e6c028f8515b
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>
Tested with GCC 4.9, Clang from XCode 5.1 and ICC 15 beta.
Clang 3.5 (pre-release) cannot compile qtdeclarative yet with -Werror
due to invalid C++ code there that calls member functions on null
pointers.
Change-Id: Ic2845371a1899716985bc0813dfb820fa418e207
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
when a module delegates to another module (as the activeqt ones do), it
doesn't have a master header to be included. we could derive the real
master header by doing a transitive dependency resolution and some
filtering, but that seems unnecessarily complex.
Task-number: QTBUG-41892
Change-Id: Ie7ce51a837ac06e929b204ec734206c11b3ae241
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
... to avoid that inherited MAKEFLAGS turn out to be incompatible with
the make we choose.
Task-number: QTBUG-39527
Change-Id: I47d4cec58b0643cc5d97868e70b24f7f37e964bb
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
This reverts f0ee55c00. VERSION actually makes sense on Windows,
because it embeds a VERSIONINFO resource into the DLL that can
be inspected by the user.
Task-number: QTBUG-37961
Change-Id: I6b81b5aa999eba16cb8d9a4d61bd596310af46b9
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Since commit cd1dff75, we use QMAKE_LFLAGS_CONSOLE when linking DLLs that
are built with CONFIG+=console. Thus, we must not pass options that are
specific to linking executables.
[ChangeLog][qmake] WinCE makespecs must not add /ENTRY: to
QMAKE_LFLAGS_CONSOLE and more. The flag is hard-coded in console.prf now.
This is a side effect of making it possible to specify a subsystem for
DLLs.
Change-Id: Ib481fd45b12140f9f05bf123db7152a3ddf0fa04
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Pass QMAKE_LFLAGS_WINDOWS and QMAKE_LFLAGS_CONSOLE to QMAKE_FLAGS
regardless of the project template.
The /SUBSYSTEM linker switch is not exclusively meant for executables
but can also be applied when linking dynamic libraries.
This is needed when building DLLs for Windows XP with VS >= 2012.
Task-number: QTBUG-41504
Change-Id: I5966cba1b6756e15275fa5d7fdbc42b99c95c07b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
GCC and Clang support compiler intrinsic error detections tools:
address, memory, thread, undefined
Let users conveniently enable it in qmake, for instance with
CONFIG += sanitizer sanitize_address
Also add a -sanitize [...] option to configure to use it by default
for both the Qt libraries, and user applications.
[ChangeLog][configure] Added support for GCC/Clang -fsanitize= options
Change-Id: Ie5418abcdf41842566df510d7707e41739e66f87
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
with qmake now de-duplicating the paths properly, we should version
these QMAKE_BUNDLE_DATA entries as well, so we don't depend on the
symlinking of the regular headers being done first.
Change-Id: Idaa2ccc1ba9b5684b0c8d84f7f760735f54432e1
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
We do so by setting a 'no_plist' config property. Can be overridden
with 'force_debug_plist'.
The debug version of Info.plist would overwrite the release version,
and it also happens to contain invalid data. In particular,
CFBundleExecutable would contain the _debug suffixed libname, which
it shouldn't. See the entry about CFBundleExecutable on
https://developer.apple.com/library/ios/documentation/general/Reference/InfoPlistKeyReference/Articles/CoreFoundationKeys.html
Task-number: QTBUG-32894
Change-Id: Ideb018e4768a7c4e276e1b07d77937451f6db6a2
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
avoids that we needlessly initialize QMLIMPORTSCANNER in addition to
QMLIMPORTSCANNER_SYS (by making the former have the contents of the
latter).
Change-Id: Ib8a12975de426ae94bd78d489099157c94cea189
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
to this end, add a mode to qtPrepareTool() which prepares the primary
variable for system() use (instead of use in makefiles).
Task-number: QTBUG-41032
Change-Id: If6aa6c206a70ecdbc2ea05bbb3cb470414fb02b1
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
MinGW static libs use libfoo.a format, and not foo.lib.
Change-Id: I899adca8ec0b1c8430f5b6c4f18ad0ea1dc6d398
Reviewed-by: Timothy Gu <timothygu99@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Giving instructions, rather than forcing one to grep qtbase for the error
message is always a good thing.
Change-Id: I0f5abed341368cdf817dc0110c2c250b377a30de
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
the condition is copied 1:1 from the BUNDLE_DATA logic in qt_module.prf.
Task-number: QTBUG-41267
Change-Id: Ia80a9a29319f70017e090855cf8d35a77b9e727f
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
This follows the discussion at:
http://lists.qt-project.org/pipermail/development/2014-June/017225.html
Qt WebEngine will have a version of 1.0 when released with Qt 5.4.
The library name is currently libQt1WebEngine.so.1.0.0 but it should
rather be libQt5WebEngine.so.1.0.0 to represent Qt's major version
releases as a whole and not the major version of the module. This
prefix essentially expresses the module's dynamic linking
compatibility with other Qt modules.
This only makes sense if each major module release will be compatible
with a single Qt major version only.
All published modules currently already have 5 as their major version,
except qtenginio which doesn't use a Qt prefix, so this change has no
effect except for qtwebengine.
Task-number: QTBUG-30910
Change-Id: I894e7a367624c7fc263cf08104173a82eafd1439
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
When deploying QML applications, the androiddeployqt tool can
use qmlimportscanner to detect the QML dependencies of the
application, but then it needs to know the root of the project
as well as additional QML import paths. We use the already-existing
QML_IMPORT_PATH for the import paths, and default to using the
location of the .pro file for the root path (same as for static
builds in qt.prf).
Change-Id: Ib536272ed1f3f1320ea8ef529655e2ba003bc734
Task-number: QTBUG-34175
Reviewed-by: BogDan Vatra <bogdan@kde.org>
It's needed by androiddeployqt tool to run "zipalign" tool
and to set it to gradle properties.
Task-number:QTBUG-40481
Change-Id: I3dd665a7461a4e981867cdad75a50940e46a5ae6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
when doing a module-by-module build, we need to also use includes and
libraries from the install tree, as it contains the current module's
dependencies. but a pre-existing installation of the current module must
not be found first, as it would cause trouble latest when it was somehow
incompatible.
but purely topological sorting of the dependencies could cause the
locations to be mixed up. therefore we give modules which are part of
the current build a priority boost.
Change-Id: I8fdbb46f0a2a630781c8a2177468039c1122151a
Reviewed-by: Giulio Camuffo <giulio.camuffo@jollamobile.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
For multi-pass RCC qmake generates broken VS project files, because
the RCC extra compiler directly calls the C++ compiler on a generated
source file. Adding this call to a VS project file will bypass any
project settings. Also, the VS project generator is not prepared to
add extra compilers that generate object files.
Task-number: QTBUG-39685
Change-Id: I1bcaad8936be8371d596f29ed8952888ba95f7b2
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This was a long-time coming.
One innovation from this commit is that it will add the source to
SOURCES if the compiler is already generating code for that specific
target. That is currently always the case for Neon, and the MIPS DSPs
since that is the only condition in which configure will enable those
targets. And because of qt_module.prf, it's also always the case for
SSE2 (but not for SSE3 or higher).
So simplify the .pri files by removing always-true conditions.
Change-Id: Ib24af74717b652c9a6be246e3c17a839470f37da
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Erik Verbruggen <erik.verbruggen@digia.com>
We don't actually detect whether the compiler can create Neon code or
provides Neon intrinsics. Most of them do, so that test would be mostly
moot. We removed the detection previously because we couldn't
automatically enable Neon due to leakage of instructions outside the
areas protected at runtime.
Instead, we rely on the mkspec properly passing the necessary flags that
enable Neon support.
This commit does not change that. All it does is verify whether the arch
detection found "neon" as part of the target CPU features. In other
words, it moves the test that was in simd.prf to configure.
It does fix the Neon detection in configure.exe, which was always
failing for trying to run a test that didn't exist
(config.tests/unix/neon).
Change-Id: Id561dfb2db7d3dca7b8c29afef63181693bdc0aa
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
This patch adds the feature use_gold_linker to use the gold linker that
has been part of of GNU binutils since 2008. Gold links C++ libraries
much faster and use less memory.
The feature is autodetected when building Qt on Linux, but can be disabled
in configure. On MingW builds it is default off but can be enabled for
cross builds.
Change-Id: Icdd6ba2e706b2c791bcf44b6e718c2b7a5eb2218
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
GCC currently requires fat object files for static libraries, since the
linker would otherwise not load the .o file from the archive at all and
the linking would fail with a lot of undefined references. Clang on
Linux also needs this, but it has no equivalent flag, so enabling LTCG
for Clang on static libraries will result in linker error.
This commit does not add support for enabling it in configure. It can be
enabled on a per-project basis by doing CONFIG += ltcg or by passing
-config ltcg to qmake's command-line.
Change-Id: I52cf99f1ed9f1701e23a3b457ba3502fd28126ce
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
currently there isn't a clean solution yet to support object files
or architecture specific files during the preprocess step when
using the xcode generator.
This fixes ios resources (but will break with large resources).
Task-number: QTBUG-39835
Change-Id: If620ab0c3b5c1f92db8f7b4740061c807730db57
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
Most compilers out in the wild still don't support the flag, so we need
to compare the version number anyway. This also makes it ready for
whenever compilers start supporting -std=c++14, something we should fix
for C++11 too.
It overrides the CXX11 variable for two reasons:
1) we reuse the mechanics in c++11.prf
2) we avoid c++11.prf overriding the flag if qmake decides to process
it later (CONFIG += c++14 is additive)
Change-Id: I79b6523fd9017483f2474634d1c09f2fd5ea039d
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
We have to escape the target name to avoid compilation errors.
This fixes the compilation failure in the qprocess autotest.
[ChangeLog][Android] Added support for building libraries with
spaces in name.
Change-Id: Ib98ba261fb3a4cc1e835d0cd2f93aac6855a7c21
Reviewed-by: BogDan Vatra <bogdan@kde.org>
The integrated assembler of clang does not understand some/all of the
ARM macro assembler syntax used in pixman-arm-neon-asm.S. By default,
this integrated assembler is used when using the "clang" command as a
driver. This patch turns off the integrated assembler of clang for that
file.
Change-Id: Ic06801266b5a4b097ca835d815bcc5d5fc672946
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When LTCG/LTO is enabled, the link-time compilation will not use the
data in the object file, but instead the precompiled data in a separate
section, which is still blank and may not be recognizable by rcc's
second pass. That would result in all resource data being nulls -- and
the best case scenario out of that is that QResource concludes that
there is no resource (it could be worse).
That happens with GCC 4.8's GIMPLE intermediate format: a fat .o file
containing GIMPLE would be modified by rcc but GCC would not use the
modified data at the link stage, whereas a non-fat .o file would not be
recognized at all by rcc and the compilation would abort.
Change-Id: I78ccbfd77ceaa723f22a4f82b5b4d6536a80d65d
Reviewed-by: hjk <hjk121@nokiamail.com>
Unlike MSVC, ICC is capable of selecting each of the processor feature
levels, so let's define the right macros.
Version 9.1 is really old and not supported, so we don't need to keep
the old workaround.
The compiler has been complaining that option -GX is deprecated and will
be removed, so update it to use the same as MSVC does.
Change-Id: I4158fcf2331c1d27462bb1cb19725c7136efab4a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Conflicts:
mkspecs/qnx-x86-qcc/qplatformdefs.h
src/corelib/global/qglobal.h
src/network/socket/qnativesocketengine_winrt.cpp
src/plugins/platforms/android/androidjniaccessibility.cpp
src/plugins/platforms/windows/qwindowswindow.cpp
Manually adjusted:
mkspecs/qnx-armle-v7-qcc/qplatformdefs.h
to include 9ce697f2d5
Thanks goes to Sergio for the qnx mkspecs adjustments.
Change-Id: I53b1fd6bc5bc884e5ee2c2b84975f58171a1cb8e
This is essentially an opt-out using CONFIG += resources_small for the
'big-data' feature introduced and made mandatory with commit 5395180.
This is currently not active in any configuration, but can be used
when the two-pass approach is neither needed nor wanted.
Change-Id: I6d4f663843e629da6f39ac4da5e77d39c58b3ddf
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It somehow forgets the dot and thus can't open any moc or uic includes.
Intel bug: DPD200357915
Change-Id: I610ba4d3df0072bfb83f90347d94f4586d0d8c86
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
x86 doesn't care about alignment, and on all other platforms where it
does something it causes build errors, so instead of removing it on
those platforms just don't enable it at all.
Change-Id: Idfeb387099b28af60ba161b6ca678b7c9df17fe1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Revert cb09e1e889 for MinGW. gcc on Windows reproducably crashes
when the pre-compiled header becomes big enough ...
Change-Id: Icd5a3dfbe59f5ff5c78832e7b4436d0f1cfa1031
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
For static builds of Qt Quick apps, qmake generates a qml_plugin_import.cpp
file. Just like the Makefiles, it should be removed only for distclean,
not in the clean step. This is what we do for non-qml plugins, too.
Change-Id: I5a3f2e7d27c3ffd5161162a8a03e4dd9c9245af5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Webkit has a different layout, so allow the tests to be found in
the appropriate location.
Change-Id: Iedbea6daada98a3c3efdbcfc1fe4df5d2c8cea6a
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Private qtwayland headers were not installed at first build, since
qmake was ignoring unexisting files from the install target. It
required another run of qmake to have a proper Makefile generated.
The rules for generated headers need CONFIG = no_check_exist, so that
files get listed in the Makefile even if they do not exist yet (thanks
to Loïc Yhuel for the pointer).
Change-Id: I1a0278d629295a55a3ddcf5f8fb068a04ba5be47
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
When qtbase has been compiled with PCH and trying to compile the
disassembler in QtDeclarative creating the PCH for "C" is failing
due the C++ includes. Guard the includes with __cplusplus to be
"usable" on C code. This guard is proposed for the "stable.h" in
the qmake precompiledheaders documentation.
Change-Id: I7a8fb9e59c666a2e1535d988fd71c5cd67d0587d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
the no_dll switch has questionable semantics: it pro-actively breaks
non-dll builds. therefore its usage needs to be limited to dll build.
Task-number: QTBUG-39594
Change-Id: I98328e502693df835af565b5ec25ada2c1c168ad
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Traditionally, RCC in "C mode" was meant to bundle small resources into
a binary, like help texts or an occasional icon. RCC produces a .cpp
file containing the actual data in a char array which is then passed
to the compiler and linker as a normal source file. Larger resources
should be compiled in RCC's binary mode and loaded at run time.
Current Qt Quick use tries to deploy large hunks of data in "C mode",
causing heavy compiler/system load.
This patch works around the issue by splitting the process into
three parts:
1. Create a C++ skeleton, as usual, but use a placeholder array
with "easily compilable" (mostly NULs) data instead.
2. Compile the skeleton file.
3. Replace the placeholder data with the real binary data.
time (qmake5 ; make clean ; make) takes 1.3 s real time for a
100 MB resource here, and there is still room for improving patching
performance if really needed.
Change-Id: I10a1645fd86a95a7d5663c89e19b05cb3b43ed1b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@digia.com>
Reviewed-by: Kai Koehne <kai.koehne@digia.com>
qml2 needs QML2_IMPORT_PATH.
this didn't affect non-prefix builds (which most developers use), so
it wasn't too serious.
Change-Id: I435dca151348669b66f091f9a9324cd69394284e
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
a) qmlimportscanner has no built-in -importPath, so it can't be omitted
even for non-prefix builds, and b) the QMLPATHS variable is also used
further down, so we can't just do away with it.
amends a658fa40.
Change-Id: I42a47a82fe13694fbac3c4a3962ebbe1d7e7865b
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
it helps enormously to use the flag correctly.
amends f0c34eb08f.
Change-Id: I04a63cc59e133169d9f6677f2f88ef98fd5c524c
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
qdoc uses the indexes as "precompiled headers" to obtain type info
necessary to properly parse sources.
the indexes needed are the ones the module actually depends on
(publically).
Change-Id: I6aad0b511d2534d584f7947c8d800300eede94ff
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: Martin Smith <martin.smith@digia.com>
the doc/ dirs in the build dir won't be created until the docs have been
built, so of course checking whether they are there during the qmake
phase is counterproductive.
this also means that we'll get some complaints about non-existing
directories (for repos that don't create any docs). there is no
reasonable way to query qmake which repos are affected, and writing
shell-specific code to query it at make time seems a bit overengineered.
Task-number: QTBUG-38862
Change-Id: Ie0588e75bfc39718fffd46f0df6785428e396eb2
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Reviewed-by: Jerome Pasion <jerome.pasion@digia.com>
Reviewed-by: Martin Smith <martin.smith@digia.com>
even if we are not doing a top-level build, we still need to specify an
index dir. that may be the install dir or the qtbase build dir,
depending on whether we are building against an installed prefix build
or a non-prefix build (building against non-installed prefix builds
outside a top-level build is inherently impossible).
Task-number: QTBUG-35596
Change-Id: Ia37d429855480d3bfe36b7ee29e087029861bfc5
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>
Reviewed-by: Martin Smith <martin.smith@digia.com>
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
instead of adding all possible plugin paths (for which QMAKEMODULES
wouldn't have been a reliable source anyway), only add the paths of
plugins of the necessary types.
this necessitates that we create qt_plugin_<foo>.pri files also in shared
builds of qt when making a prefix build. we don't install them unless it's
a static build, though.
Change-Id: Ib56b009562a7131d4dc4dfc259b34ec6581b0f77
Reviewed-by: Joerg Bornemann <joerg.bornemann@digia.com>
