Replace all QT_NO_PROCESS with QT_CONFIG(process), define it in
qconfig-bootstrapped.h, add QT_REQUIRE_CONFIG(process) to the qprocess
headers, exclude the sources from compilation when switched off, guard
header inclusions in places where compilation without QProcess seems
supported, drop some unused includes, and fix some tests that were
apparently designed to work with QT_NO_PROCESS but failed to.
Change-Id: Ieceea2504dea6fdf43b81c7c6b65c547b01b9714
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Embeddeding a QWindow via QWidget::createWindowContainer() fails to
deliver the SurfaceAboutToBeDestroyed event. This breaks any OpenGL
or Vulkan based QWindow that releases resources upon this event, and
is particularly critical with Vulkan where the only way to do properly
ordered swapchain - surface cleanup is via this event.
In the non-embedded case close() eventually ends up in an explicit
destroy() in QWindow. In the embedded case destroy() only gets called
from ~QWindow. This then silently breaks since the subclass' reimplemented
event() virtual is not getting called anymore.
To remedy the problem, simply add an explicit destroy() to
QWindowContainer.
Task-number: QTBUG-55166
Change-Id: I1671e8f4d39f6c44e19eca7b9387f55fe3788294
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
...in order to support sRGB framebuffers.
Add a --srgb option to the qopenglwidget example to allow testing.
[ChangeLog][QtWidgets][QOpenGLWidget] Added support for specifying
custom internal texture formats in QOpenGLWidget in order to make it
possible to have the widget backed by an sRGB-capable framebuffer.
Task-number: QTBUG-50987
Change-Id: I112e2f0ab0b1478c69e601031aa0bafaa87fa847
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Unlike setTimeSpec, this forgot to clear the bit when detaching. So it's
possible that some further use of the flags could incorrectly conclude
that the data was short and then proceed to corrupt the pointer.
The example from QTBUG-59061 caused this because toUTC() -> toTimeSpec()
calls setMSecsSinceEpoch which left the bit set; then addDays() calls
setDateTime(), which calls checkValidDateTime() and that corrupted the
pointer. This problem was more visible on 32-bit systems because no
QDateTime was short (except for default constructed ones), but it
can happen on 64-bit with sufficiently large dates.
Task-number: QTBUG-59061
Change-Id: Ibc5c715fda334a75bd2efffd14a562a375a4e69b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The call to trimmed() makes sense for URLs typed in a browser's location bar,
but its use in every code path made it impossible to open a file with a trailing
space in command-line tools that uses fromUserInput(cwd) to handle command-line
arguments, as recommended. For instance kde-open5 "file.txt " would fail.
Change-Id: Ie61182684521d91f077d3e76f95b7240965ab405
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This allows to test specific filenames without polluting the current dir.
Change-Id: Ieb99019a2e37e30f294d85c5d80af1de1b919019
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
operator=, which was only used for clearing, wasn't clearing the hash.
This led to a mismatch between the vector and the hash (given that the hash
points into the vector).
Spotted by interrupting kmail in gdb, and it was in this code
iterating over a 2000 entries hash (the first vector entries not matching
the hash, this code keep appending new entries for the same formats).
This fixes QTBUG-8862 again, the initial fix having been accidentally
reverted in 467b15a.
Change-Id: Ia34b3d002a0199e1930431a4bbdb2ec981ed4ffc
Task-number: QTBUG-8862
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
A Q_GADGET class can be used both as a value class and a pointer, but
right now QMetaType::IsGadget is only set for value types. This change
introduces PointerToGadget metatype flag which is set for pointers.
This allow for better handling of gadgets in code as well as
disambiguating between value types and pointers to value types.
Change-Id: Id3bd9e18a8eec7ca1cc6b1c25ed03cdc8c0a75a1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Ensure that tablet moves are delivered iff tabletTracking is true.
Task-number: QTBUG-26116
Change-Id: Iaa360e181f0c6484cfbde6fa5365f2f0dc77433a
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
It's only used in the autotests, and it private API, so
downgrade from Q_CORE_EXPORT to Q_AUTOTEST_EXPORT.
Fix a use of QTimeZonePrivate functions unprotected by
QT_BUILD_INTERNAL in tst_qtimezone.cpp.
Change-Id: I70eaea06f8fcf2983aeafb6894c3a5d2a4b272a7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Unfortunately, that ctor also takes a ControlType argument (defaulted),
and calls the non-constexpr, non-inline function setControlType().
In order to make at least the two-arg version constexpr, I added
a use of the ternary operator to check for type == DefaultType,
making all calls of the ctor that use type == DefaultType
constexpr. For init'ing an aggregate type without ctor in the
ctor-init-list, I needed to require uniform initialization, too.
C++11-style constexpr cannot call void functions, so I needed
to extract the transformation part of setControlType() into a
new function that returns the result instead of storing it directly.
Saves a surprising 2K in QtWidgets text size on GCC 4.9, AMD64 Linux
stripped release builds.
Change-Id: Ib4adf5fd6e54d5345dbfe1c298554278faf13c58
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Since SQLite does not define a regexp function by default, provide a Qt
based implementation which can be enabled using QSQLITE_ENABLE_REGEXP as
an connect option. This way statements like
SELECT * FROM table WHERE col REGEXP '^[a-d]';
work out of the box.
[ChangeLog][QtSql] Add QSQLITE_ENABLE_REGEXP connect option for
QSQLiteDriver. If set a Qt based regexp() implementation is provided
allowing to use REGEXP in SQL statements.
Task-number: QTBUG-18084
Change-Id: I7f0e926fe4c5d6baea509f75497f46a61ca86679
Reviewed-by: Milian Wolff <milian.wolff@kdab.com>
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Reviewed-by: Sebastian Sauer <sebastian.sauer@kdab.com>
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
The cancel() function added in 5b11e43e for Qt 5.5 suffers from a
number of problems:
First, if runnable->autoDelete() is true, then the function suffers
from the ABA problem (see documentation written for trytake()).
Second, if runnable->autoDelete() is false, due to cancel() throwing
away crucial information instead of returning it, the caller cannot
know whether the runnable was canceled (and thus has to be deleted),
wasn't found or is currently executing (and thus mustn't be deleted),
or has finished executing (and can be used to extract the result).
Deprecate this dangerous API and replace it with the much more useful
Private::stealRunnable(), promoted to public API and renamed to
tryTake() for consistency with the rest of Qt.
Described the various caveats in the function's documentation.
[ChangeLog][QtCore][QThreadPool] The cancel() function suffers from
several subtle issues and has been replaced with a new tryTake()
function.
Change-Id: I93125935614087efa24b3e3969dd6718aeabaa4f
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
We define QT_STATICPLUGIN for the plugins in this case, so that they
define the factory functions needed to link them directly into the
test.
Change-Id: I0f2de7bf6bec5a6d53ec9ad92536817c1221b7d5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Convert the function to be data-driven, then add cases for ranges with
limits INT_MIN, INT_MAX and zero to check for overflows in the
painting code. Speed up the function by removing the per-iteration
qWait() call and rely solely on the existing QTRY_VERIFY() to do the
right thing.
Change-Id: I6d2a2c2b7637fca7ddb2a9adc5f6550f8255da14
Reviewed-by: David Faure <david.faure@kdab.com>
We fully specialize QTypeInfo for most C++ built-in types,
but enums and extended integral types (like GCC's int128_t)
were not covered.
Now that we depend on <type_traits>, we can stop pessimizing
enums and extended integral types in QVector and QVLA by
defaulting QTypeInfo::isComplex to true for such types.
Fix a test that checked that enums were complex types. This should
have been a XFAIL test. Enums are not complex types.
Change-Id: Ibb0fb38cc83e980a428b5573d1db5666593418ae
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
don't attempt to hand-craft a library export any more. instead, use the
configure system's built-in mechanism, and refer to it via QMAKE_USE.
this also allows us to rely on transitive dependencies in the autotest.
as a side effect, this makes the openssl-linked feature imply the
openssl one.
Change-Id: I5dd209b63bc8fbbc62852f6ffc472d4452ea2e68
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Some format and parse tests for time and date-time depended on locale
but had test data for the C locale (so fail if the test-environment
has, e.g., LANG=de_DE@utf8). So impose the C locale (until Qt 6).
The date-time test did *some* attempts at fixing for locale, but
failed to handle am/pm; and we do have "### Qt 6" comments in
Q(Date|Time)+::fromString indicating that we intend to switch these
methods to use the C locale by default (which shall fix this once and
for all). So rip out the incomplete localization now and test we work
properly at least when the locale used *is* C. Add a comment to the
matching QDate test to rip out its (presently adequate) matching code
once we do get to Qt 6 and make fromString() use the C locale.
QDateTimeParser uses systemLocale(), which is initialized the first
time it gets accessed; so we need to frob the locale *early*; doing so
in the test-class constructor is about as early as we conveniently
can; and seems to work (while doing it in individual tests does not).
(There is no point rolling back at the end; the QSystemLocale global
has been set up by then, so the roll-back would merely leave the
global out of sync with setlocale() and the environment.)
Task-number: QTBUG-58728
Change-Id: Ifa6778a80276050a099387a6dab15a1096be7561
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
AİİA.pdf takes 8 QChars, but after lowercasing it takes 10, so the code cannot
assume the length to be the same.
Task-number: QTBUG-58822
Change-Id: Id6fbb99f6afd08ee420099cd66372732d7598d9e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QLineEdit, QAbstractSpinBox and QComboBox did not notify micro focus
changes to the input context.
In particular, the updates were missed during pre-edit stage.
This change adds the missing bindings to QWidget::updateMicroFocus().
Change-Id: I9a7fff962f46dbabd8fb02836c206bace115793b
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
see 5a1b4832a2 for more detail
Task-number: QTBUG-58142
Change-Id: I51851ea9b4fe7b8eeadc452bc3dbb1ea00026d29
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Like the lvalue QVector::append() overload, when we reallocate,
we need to take a copy of the function's argument because the
reference will get stale upon reallocation.
Add a test.
[ChangeLog][QtCore][QVarLengthArray] Fixed a bug involving
appending an item already in the container to the container
again.
Change-Id: I06eeed6cb383dd5924e47a302bb3d1666d04c8e8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Automount filesystems like /home on many operating systems (QNX and
OpenIndiana, at least) don't like if you try to mkdir in them, even if
the file path already exists. OpenIndiana even gives you an ENOSYS
error.
So instead, let's try to mkdir our target, if we fail because of ENOENT,
we try to create the parent, then try again.
Task-number: QTBUG-58390
Change-Id: Ibe5b1b60c6ea47e19612fffd149cce81589b0acd
Reviewed-by: James McDonnell <jmcdonnell@blackberry.com>
Reviewed-by: David Faure <david.faure@kdab.com>
Systematic testing in tst_QStringApiSymmetry revealed a bug in
QStringRef::toLatin1(): a null input did not result in a null output,
but an empty one. This is fixed, for consistency with
QString::toLatin1(), and QString(Ref)::toUtf8(), which behaved
correctly already.
The same bug was found in QString(Ref)::toLocal8Bit(), which is
particularly hideous, as it's documented to fall back to toLatin1(),
which preserves null inputs. Fixed, too.
[ChangeLog][QtCore][QString] toLocal8Bit() now preserves nullness of
the input QString (outputs null QByteArray).
[ChangeLog][QtCore][QStringRef] toLocal8Bit() and toLatin1() now
preserve nullness of the input QStringRef (output null QByteArrays).
Change-Id: I7026211922c287e03d07e89edbad2987aa646e51
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
After it started to fail (somehow it's only OpenSUSE 42.1) again and again
and after a quick re-evaluation it appears the logic testing SETTINGS|ACK
is incorrect. We (client side) start by sending the preface and then
continue to send our request(s). The other side (server) starts from sending its
SETTINGS frame. These settings must be ACKed, but apparently it can happen,
that server receives a requests and sends a reply before it receives SETTINGS|ACK,
resulting in replyFinished (replyFinishedWithError) signal and event loop stopping.
As a result - QVERIFY(serverGotSettingsACK) fails.
Task-number: QTBUG-58758
Change-Id: I8184cf459b2b88f70c646171e0115c184237fad1
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
tst_QDateTime::operator_insert_extract() was setting the time-zone and
taking care to restore it at the end of the test; however, if the test
were to fail, the restore would be skipped. Package the zone-setting
and restore in a class instance, so that premature return can't bypass
the restore.
Change-Id: I3df63260da17e481ef4d0d107d9f0fdea3e147e7
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
We keep the runnables from finishing by having them block
on a QSemaphore::acquire() call inside run().
If we fail a test that precedes the call to sem.release()
further into the test, the early return will cause the
thread pool to be destroyed, which will then attempt to
wait for the runnables to finished, which, in turn wait
for the semaphore to be released.
-> dead lock
Fix by introducing a RAII object to release the semaphore
with a sufficiently large number to unblock all runnables.
That number will in some situations be too large, but that
does not matter.
Change-Id: I1ec7e29b37bc36309e93e6e30708cc7db3c9579c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In order to get reproducible runs of the test, we need to
wait in the main thread until all runnables have started
executing. Otherwise, what the cancel() loop below actually
does will vary from run to run.
Change-Id: Ib912b0943e7bbd55c9480ae6fd4011ba20ac457e
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Instead of allocating a statically-sized array on the heap,
use an automatic C array instead.
Replace some magic numbers with named constants.
Change-Id: I17d29a76a67c4a413453ac26a5dee8cd54a8a37d
Reviewed-by: David Faure <david.faure@kdab.com>
Manipulating a simple int from multiple threads is a data race,
thus undefined behavior.
Fix by using QAtomicInt and atomic operations instead.
Change-Id: I5418bc260da57fe353a71b8e5c7c1c97adbe7597
Reviewed-by: David Faure <david.faure@kdab.com>
This should reduce the failure rate. We're still doing qSleep of the
same amount of time, but we now only fail if the slip is over 100 ms.
Task-number: QTBUG-58713
Change-Id: I536c32a88bff44dab37afffd14a1afdf0b2e522a
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
currencySymbol == "$" does not mean negative currency values will be formatted
as "($value)". With all locales I have on my mac machines (10.11/10.12) the
result is different from what this test expects. Also, the results are very
different for different locales. Apparently, we never saw this problem before
since in our CI "macs" we never have US Dollar/en_US selected in System Preferences.
Task-number: QTBUG-58784
Change-Id: Ic2c3a3172bf1e715e99092ddee8f461b216d995a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The runUpdateMimeDatabase() call was timing out on the CI due to
running out of the default 30s timeout for QProcess::waitForFinished()
(on my machine, that call takes less than 0.5s, reliably...).
Increase to two minutes.
Change-Id: I61b2e060ea9c2508b853847ba7040ad499e0084c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: David Faure <david.faure@kdab.com>
When one of the QCOMPAREs in Consumer::run() fails, the consumer
returns early, leaving the producer deadlocked in a QSemaphore's
acquire() call. Change these to tryAcquire() with a large timeout,
so the producer, too, eventually leaves run().
Change-Id: I7421d43305decd4754e09c8e092363594d1be06b
Reviewed-by: David Faure <david.faure@kdab.com>
This test was determined to be flaky on the CI.
Task-number: QTBUG-58741
Change-Id: I43196d3a27f726fb96b427f5071e726b571a0404
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: David Faure <david.faure@kdab.com>
This is a simple RAII class that makes semaphore releasing
reliable in the face of exceptions and early returns.
This code originates from KDTools' KDSemaphoreReleaser[1], but
has been extensively reworked to support C++11 move semantics.
[1] https://docs.kdab.com/kdtools/2.3.0/class_k_d_semaphore_releaser.html
[ChangeLog][QtCore][QSemaphore] Added a new RAII class, QSemaphoreReleaser,
to reliably perform release() calls.
Change-Id: I6aff64d37cc0882b17c4419817bde60b542f34d9
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The verifySessionProtocol() method in the SecureTransport backend did not
properly handle TlsV1_0OrLater, TlsV1_1OrLater and TlsV1_2OrLater.
This commit teaches verifySessionProtocol() about them.
It also adds TlsV1_0OrLater, TlsV1_1OrLater and TlsV1_2OrLater to the
protocolServerSide() test in tst_qsslsocket.
Change-Id: I394766c75dbea4d89bf3d6b9c3f3c89530ac0749
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
We can defer the creation until the window is shown.
Change-Id: I3d5b45ae59ee0925996cf12cd46dd574c8c6ef95
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Add proper support for 'so' and 'bundle' suffixes. Qt wrongly assumes
.so libraries are not versioned on Apple platforms, which is
wrong. Also, the shared library .bundle which is what Apple recommends
instead of .so, are also versioned (not to be confound with the
different Core Foundation bundles, which are directory hierarchy).
For more info, see http://docstore.mik.ua/orelly/unix3/mac/ch05_03.htm.
Especially the part that reads:
"Loadable modules, called bundles in Mac OS X, have the file type
MH_BUNDLE. Most Unix-based software ports usually produce bundles with a
.so extension, for the sake of consistency across platforms. Although
Apple recommends giving bundles a .bundle extension, it isn't
mandatory."
Task-number: QTBUG-50446
Change-Id: Iacd5136397a12d65d83821434f332eb602550b4b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Vectorized versions of ucstrncmp work on larger chunks of text
(typically 8 characters and an optional 4 more in some cases), so there
are now 4 extra sets of tests:
- strings of 1-65 characters, all different
- strings of 1-65 characters, all the same
- strings of 1-65 characters, all the same *except* the last character
- strings of 16 characters long, all the same except one, and that one
is different for every string (i.e. first string differs in first
char, second in second char, etc)
This should excercise both 1 or more iterations of the vectorized loop,
the detection logic inside the loop, and off-by-one cases.
The input is all ascii, so the ::compare() test will run them for both
QChar-QChar comparisson and for QChar-latin1 comparisson.
Change-Id: Ifaa7e019c63b581d4af5aef6dcfb3e7456c7d360
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This reverts commit b0c1e07d64.
The unit tests it introduced trigger errors with the macOS and
Win32 implementations, which means the there's something seriously
wrong with either the API, our implementation or the tests.
Revert for now until this gets fixed. Blacklisting was also the
wrong tool to use. The tests should have used QEXPECT_FAIL.
Change-Id: Ida20c6bbe0c019835a22464535029585e8e1e367
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
There weren't any, at all.
Testing on the CI showed that the implementation is broken on
macOS, and, to a lesser extent, on Windows, so blacklist the
failing tests until the implementation can be fixed. No need
to hold back testing the other implementations.
Task-number: QTBUG-58737
Change-Id: I9ae16ab778dbe2e95a6ca5e0bae00df4bad65cb2
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
This test was determined to be flaky on the CI, depite attempts
to stabilize it (b750a3786f).
Task-number: QTBUG-58745
Change-Id: I933199cd537002699906147d172bb797f1dc90c1
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Since 5.7, QIODevice::peek() implementation is based on transaction
mechanism. While technically it's correct, seeking backward on a
buffered random-access device clears the internal buffer that affects
the performance of reading.
To solve the problem, this patch implements peek mode directly inside
the reading procedure.
Task-number: QTBUG-56032
Change-Id: Ic5269f76e44c491a0309e13aba87fa7cf7b9259f
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The controls need to reflect the facts that e.g. maximized and fullscreen
can both be set at the same time, the same way a window can be minimized
and fullscreen.
Change-Id: I7f3e354a5efaefb9f51e6b1f24fa35980fe35899
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Makes operations like minimizing a window happen "behind the scenes"
because the window is hidden during the state change.
Change-Id: I01a00661e57f2dcfa6aef78ee0cfa36fbed1bb03
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This test was determined to be flaky on the CI.
Task-number: QTBUG-58713
Change-Id: Ie6e6a69b8ea625e3a3102c88d52f1f0fbec242aa
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
I didn't even try to understand what the old code was trying to do;
once you're told by a user that the code is wrong, you see that it is.
Fixed by just using the row as passed to takeRow() instead of trying
to do some storage-index calculations. The m_matrix indexing operator
does it all for us.
Added a test that checks that the expected field widget gets
returned. Fixed expected test data that was wrong, and just checking
that the implementation behaves as implemented, instead of as
documented.
Amends change 8fbae648db.
[ChangeLog][QtWidget][QFormLayout] The functions takeRow() and
removeRow(), new in 5.8.0, now take and remove the correct row.
Task-number: QTBUG-58693
Task-number: QTBUG-15990
Change-Id: I7185ccbc6c03e2579741cad5c0c821d3ed165474
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
When a non-QString-backed mode (via the (QChar*, int) ctor) was added
for Qt 4.5, the author forgot to adjust the setCaseSensitivity()
function. It still uses q_pattern instead of (p.uc, p.len) as the
pattern for which to create the skip-table. Since there is no
setPattern() overload for this mode, the correctness of the matcher is
not harmed by this, but its performance degrades to that of a linear
scan: the skip-table, being filled from an empty pattern, will be
all-zeros, sending bm_find() into the 'possible match' case at every
character.
Since matching is still correct, but slow, it's not possible to write
a test for this. I did, however, leave my attempts in the auto-test,
for when we add QStringView overloads of setPattern() which will then
be able to expose the bug.
Change-Id: I7b803e8624b0352a0a974900affbbfc0c260d93b
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
The setData method of an item view would get an incorrect value of a
QDialog's result. This patch changes the order of functions called to
fix that.
[ChangeLog][QtWidgets][QDialog] Fixed a bug where accessing the result
of QDialog's result could yield an incorrect value in some situation
like using it as a delegate for item views.
Task-number: QTBUG-6018
Task-number: QTBUG-12156
Task-number: QTBUG-14430
Change-Id: I6ee4b6e8cacf6a806631c05c6c5dbcff925df65e
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Jesus Fernandez <Jesus.Fernandez@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Remove the line setting the DPR from the source; the image
is moved.
Task-number: QTBUG-58653
Task-number: QTBUG-58645
Change-Id: I2de94681459dba1d69dee06da44617fb9fa35bcc
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
As explained in
https://blogs.kde.org/2009/03/26/how-crash-almost-every-qtkde-application-and-how-fix-it-0
creating dialogs on the stack is a bad idea if the
application or the dialog's parent window can be closed
by means other than user interaction (such as a timer or
an IPC call). Since we cannot know whether Qt is used to
build such an application, we must assume it is, create
the dialog on the heap, and monitor its lifetime with a
QPointer.
Instead of using manual resource management, add a
minimal implementation of QAutoPointer, and use that in
all static get*() functions.
Task-number: QTBUG-54693
Change-Id: I6157dca18608e02be1ea2c2defbc31641defc9d1
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: David Faure <david.faure@kdab.com>
When a QFile object is reused, the atEnd() method may return incorrect
values. The reason for this is that QFileDevicePrivate::cachedSize is
not cleared. Setting cachedSize = 0 in the close() method fixes this issue.
Task-number: QTBUG-57698
Change-Id: I828a2cf844e98d581098f2c781fa47d2cd3275ce
Reviewed-by: Alex Trotsenko <alex1973tr@gmail.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
At 200 ms, the error on first firing could be 10 ms.
Task-number: QTBUG-58519
Change-Id: Ifaee7464122d402991b6fffd14a02a4ce782f11f
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
tst_qsortfilterproxymodel.cpp:3997:14: warning: 'data' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
tst_qsortfilterproxymodel.cpp:4004:9: warning: 'rowCount' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
accessiblewidgets.h:101:11: warning: 'interface_cast' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
accessiblewidgets.h:115:13: warning: 'textBeforeOffset' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
accessiblewidgets.h:121:13: warning: 'textAtOffset' overrides a member function but is not marked 'override' [-Winconsistent-missing-override]
Change-Id: I75ba00a0109ff25a2a22554980b8e541e661f806
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
On macOS, the code that read the plist is using
QByteArray::fromRawCFData. When we return the data directly
we need to detach the QByteArray so that it does not point
CFData's data that will get deallocated just after the call.
Task-number: QTBUG-58531
Change-Id: If829a304b986c99c8fc2aeeb992f2d539a4eef3a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The pattern did not match double-digit version numbers like 5.10.0.
Adapt it to better match the version number and use QRegularExpression.
Change-Id: I2e25b247213cee6853bfeb27871c839135e3970f
Reviewed-by: Jarek Kobus <jaroslaw.kobus@qt.io>
When calculating the width of a text for drawing decorations on top,
we use the effective advance of the whole text after it has been
through the shaper.
However, in the case of QStaticText and QGlyphRun, there is shortcut:
Since we only have the glyph indexes and position of each glyph,
we use the position + advance of the right-most glyph to find the
right-most edge of the decoration. For this, however, we use the
advance of the glyph *out of context* of the rest of the string,
because the whole idea is to avoid doing the shaping of the string
with every draw call. In some rare cases, the advance of the
right-most character, in the context of the string, is different
from the advance of the standalone glyph.
Now, one way of fixing this would be to store the width of the
text in QStaticText and QGlyphRun, but since it is a very rare
artifact which is barely visible, I have opted to just work around
it in the test instead, the workaround being to force integer
metrics so that we don't get the small 0.2 pixel error.
Task-number: QTBUG-55217
Change-Id: I8d16d52f2ef27275cabb7d3865aeeaa31617ba3d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Recent HB changed the way of handling ZWJ/ZWNJ to be more in par
with other engines.
Change-Id: I8abacd195e4b247c8fa6d91ef1086e74da0a1efb
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
The QFontMetricsF version of the test should not truncate the
returned values, as the results may then be wrong.
Change-Id: I17f97f846bb723709e695e8866e437d6888d275b
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
OpenSUSE has a bitmap font called "Waree" while the test
is created for the TrueType font which is available on Ubuntu.
The style names are different, so we can use that to check
that we have the right one.
Change-Id: I808d0d1ecde9f10ed7730dc76ab3818490002ba9
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
- QCOMPARE takes (actual, expected) rather than the other way around
- Added a qWarning with more details before a QVERIFY
Change-Id: I0a903a54db28ff2de1f684a2dd9abba3660ee916
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
As used in recent qtdeclarative commits, so better make sure it keeps working.
Change-Id: I6d0ceda76201e3e7f75661cb6449e1ff32329126
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Qt already supports high DPI icons using the “@nx” approach, where the
device pixel ratio that the image was designed for is in the file
name. However, our implementation of the freedekstop.org Icon Theme
specification did not support the Scale directory key:
https://standards.freedesktop.org/icon-theme-spec/icon-theme-spec-latest.html#directory_layout
This meant that users creating icons via QIcon::fromTheme() did not
get high DPI support. This patch fixes that.
[ChangeLog][QtGui][QIcon] Implemented support for Scale directory key
according to Icon Theme Spec. Icons created via QIcon::fromTheme()
now have high DPI support by specifying the Scale in the appropriate
entry of the relevant index.theme file.
Task-number: QTBUG-49820
Change-Id: If442fbc551034166d88defe607109de1c6ca1d28
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Topi Reiniö <topi.reinio@qt.io>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
There was a test that tested this, but was wrong.
[ChangeLog][QtCore][QVariant] Fixed a bug that caused wrong results for
comparisons of QVariants containing either NaN or infinite numbers.
Task-number: QTBUG-56073
Change-Id: I33dc971f005a4848bb8ffffd1475d29d00dd1b7f
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This constitutes a fairly complete submission of an entirely new
floating point type which conforms to IEEE 754 as a 16-bit storage
class. Conversion between qfloat16 and float is currently performed
through a sequence of lookup tables. Global-level functions
qRound(), qRound64(), qFuzzyCompare(), qFuzzyIsNull(), and
qIsNull() each with a qfloat16 parameter have been included
for completeness.
[ChangeLog][QtCore] Added new qfloat16 class.
Change-Id: Ia52eb27846965c14f8140c00faf5ba33c9443976
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Under certain circumstances, VS2015 reported ambiguous options in using
the operator>(Enum,int) operator. This change adds a static_cast<qint64>
to remove any ambiguity. In the process of testing this change, a gap
in the existing logic was identified: the handling (just in the test
code) of large negative enum values. Consequently, and additional
test case was added, and additional if-conditions were added to account
for that case.
Change-Id: Ife2c471ba4caa4b9a0107722042114e58145c4d0
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The first one was already suppressed for GCC, so also do that for clang:
/Users/erik/dev/qt5-dev/qtbase/tests/auto/corelib/tools/qstring/tst_qstring.cpp:1076:16: warning: format string is not a string literal (potentially insecure)
[-Wformat-security]
a.sprintf( zero );
^~~~
/Users/erik/dev/qt5-dev/qtbase/tests/auto/corelib/tools/qstring/tst_qstring.cpp:1076:16: note: treat the string as an argument to avoid this
a.sprintf( zero );
^
"%s",
The second one could also occur with other compilers, so fix it in a
generic way.
/Users/erik/dev/qt5-dev/qtbase/tests/auto/corelib/tools/qstring/tst_qstring.cpp:6382:5: warning: ignoring return value of function declared with
warn_unused_result attribute [-Wunused-result]
string.repeated(3);
^~~~~~~~~~~~~~~ ~
2 warnings generated.
Change-Id: Id999179e795580a37b5be673ee54d6fa1a006dd7
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
benchmarktests.h:323:18: warning: field 'm_as_pixmap' is uninitialized when used here [-Wuninitialized]
benchmarktests.h:371:18: warning: field 'm_as_pixmap' is uninitialized when used here [-Wuninitialized]
benchmarktests.h:417:18: warning: field 'm_as_pixmap' is uninitialized when used here [-Wuninitialized]
Change-Id: Ica496e3baa19e0701c64222ce8ab92ec94178db7
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Because on Windows, the .ini files are saved with CRLF, but the files in
the Qt resource are just LF (.gitattributes makes them so).
Task-number: QTBUG-25446
Change-Id: I5eab0d9620bd1ba675b0a87c554f62cef0f98fcc
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
In some situations, this allows for nicer code. It's also possible to
make this constexpr in C++11, whereas the mutable transpose() would
require C++14-style constexpr.
The new function should also be faster, since it just swaps the member
variables.
Because of constexpr-function limitations, the way the return value is
constructed needs to depend on the level of the compiler's C++11 support.
This is not the only class that requires uniform init to provide a fully
constexpr interface (QUuid and QBasicAtomic come to mind), so this should
probably be generalized across Qt at some point.
Added tests.
[ChangeLog][QtWidgets][QSizePolicy] Added transposed() method.
Change-Id: Ic1077a0d5a861e7c63bd1daeeb42b97c3a2f71ef
Reviewed-by: Sérgio Martins <sergio.martins@kdab.com>
Also add a basic test for constexpr expressions involving QSizePolicy.
GCC < 4.8.0 has problems with initializing variant members in constexpr ctors:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=54922
Instead of revoking its Q_COMPILER_CONSTEXPR, which is a source-incompatible
change, simply note the fact so we can selectively provide constexpr for
QSizePolicy.
Change-Id: Iba8e5a7cdf847d73e8e2b6bb6211fb3c9846aa0a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- port from inefficient QLists to QVector
- mark types held in Qt containers (incl. QVariant) as Q_MOVABLE/PRIMITIVE_TYPE
- remove pointless user-defined copy special members which prevent the class
from having nothrow move special members
Fixes errors reported by my local tree's static checks.
Change-Id: If3910484cea81a8e2c5ab737908c9443f75782c5
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The equality operator was supplied, but this one was missing.
[ChangeLog][QtNetwork][QHostAddress] Added op!=(SpecialAddress, QHostAddress).
Change-Id: Iad9c55fa0ee7a8e97d5e4ea4be0605b8b74649d1
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Amends 7896ae052a. The previous change
focused only on ZWJ and ZWNJ, but there are many other formatting characters
that we need to support and that may be rejected by the German keyboard-hack.
This opens up for all characters in the Other_Format category.
Task-number: QTBUG-58364
Change-Id: Idd967a9ae5b12060c851f6030b7e019508561696
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
In tst_QDBusMetaObject::types(), hold a QMetaObject obtained from
QDBusMetaObject::createMetaObject() in a QScopedPointer instead of
leaking it. Use correct return value type.
This fixes the remaining errors in GCC 6.1 Linux ASan runs of
tests/auto/dbus.
Change-Id: I1df7f8e42d45f40ecf381fe7b684a8ab5ebee675
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The char* returned from QTest::toString() calls must be manually
delete[]ed.
Change-Id: Iad078e8741e3e97693b1a417693f414b3fb3ec09
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Taken QTreeWidgetItems need to be deleted, as do items
created without a parent, and widgets without parent.
Change-Id: I7ffa69903af9a1b92ba308f9f9416aec1d6d975f
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
... for calculated test data names.
That involved removing the leading ", " from test name literals
(folding it into the format string) and porting from some QString code
to QByteArray to make the result usable with addRow(), which does not
support %ls...
Change-Id: Icb2344778203f10939ae46b9e46872101f3878a9
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
There was an off-by-one error in the while loop for aarch64: we start
counting at 0 for the first position, so the last valid input position
is "a+7", not 8.
This wasn't covered by the tests, nor was the SSE2 version, so now there
are also tests for both versions.
Change-Id: I7eb8c5708e6179f45ea56885b0e66e1a37969c1d
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Use the new QImage method instead of operating on private API.
At the same time the code is improved to ensure the QImage is detached.
Change-Id: Ia015c0bb18d7bc62da38397594730254843e5a0d
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Implements isNull for QVariants of a nullptr so they always return
true to isNull(), instead of depending on how they were constructed.
Task-number: QTBUG-58296
Change-Id: Ibddec795cdadedef7e17d22c265c29e752d8f99f
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Do not wait up to the timeout ms after already having waited several
times. At the same time upgrade to using the QDeadlineTimer which
is designed for this purpose.
Change-Id: Iaf5e4f4655605d5143ce91040c6eb6706752e504
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Remove the qWait() and introduce a QTRY_COMPARE()
checking for the end value first.
Task-number: QTBUG-58402
Change-Id: I2d3758178de5f67881008f28c406076ad27c4a90
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Have a widget-based application that uses qTriangulate for fills
and QTriangulatingStroker (and optionally the dash stroke processor)
for strokes.
The resulting triangle (strip) set is visualized on a simple QPainter
canvas, offering the ability to zoom in and examine how the triangulator
behaves on a number of example shapes. It is also possible to step through
and only have the first N set of triangles drawn.
Change-Id: I3a27d86d4ea13a63dd4be0fe81dd4b5ed6e4fa75
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
The regression was introduced in d8857f21ac. The original change was
meant to fix support for SVG icons, but failed to take into account
a valid QIcon with no sizes, but which is also unable to create
a pixmap for the requested size.
Task-number: QTBUG-58344
Change-Id: I7ac1dbfaf6e3dab8581fe4b33c814e2517fcdba8
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Rewrite tcpSocketNonBlockingTest() and downloadBigFile() to use lambdas for
the slots. This allows for removing the related member variables and slots
of the test class and ensures no leaks of sockets or inconsistent values.
Add an error handler printing the error message to the flaky downloadBigFile()
test.
Change-Id: Ieb64063c41e045a1a50a6d074bef01753ee319ef
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This change allows painting via QPainter onto a QOpenGLWindow, QOpenGLWidget
or QOpenGLFramebufferObject when an core profile context is in use. This is
important on macOS in particular, where compatibility profiles are not
available, and so the only way to use modern OpenGL is via a core profile
context.
Added core profile compatible shaders with moder GLSL keywords.
The paint engine binds a VAO and two VBOs from now on, whenever VAOs are
supported. Note that this changes behavior also for OpenGL 2.x context that
have VAO support via extensions.
The Lancelot test suite gains support for core profile contexts. This can
be triggered via -coreglbuffer in place of -glbuffer when manually inspecting
via 'lance', while tst_lancelot will automatically run core context-based tests
whenever supported.
Task-number: QTBUG-33535
Change-Id: I6323a7ea2aaa9e111651ebbffd3e40259c8e7a9c
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Use QTRY_COMPARE with a timeout to check for the stopped state
unless BAD_TIMER_RESOLUTION is defined.
This speeds up the test by 1s and prints diagnostic information
should an interval be too short (as seems to be the case on macOS,
currently).
Change-Id: I8f884cd66ad33314124d3130d9f49606e6dfe9f3
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
HTTP Strict Transport Security (HSTS) is a web security policy that
allows a web server to declare that user agents should only interact
with it using secure HTTPS connections. HSTS is described by RFC6797.
This patch introduces a new API in Network Access Manager to enable
this policy or disable it (default - STS is disabled).
We also implement QHstsCache which caches known HTTS hosts, does
host name lookup and domain name matching; QHstsHeaderParser to
parse HSTS headers with HSTS policies.
A new autotest added to test the caching, host name matching
and headers parsing.
[ChangeLog][QtNetwork] Added HTTP Strict Transport Security to QNAM
Task-number: QTPM-238
Change-Id: Iabb5920344bf204a0d3036284f0d60675c29315c
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
[ChangeLog][QtCore][QFileSelector] Removed the requirement for an unused
default base file in case you want to load only a variant.
When the base file (e.g. /image.jpg) was missing, no selectors were
considered and it was not possible to load variants of this file (e.g.
/+android/image.jpg, /+android/+tablet/image.jpg) without specifying the
directory as well.
As a work around, one previously had to place a default file in
the base location, which is undesirable in some cases because:
1. The extra file consumes unnecessary space.
2. It is impossible to encapsulate platform-specific implementation
details by hiding files in a subdirectory.
Task-number: QTBUG-51230
Change-Id: I4c7f9ec952bff6e5b7738d8cabe3c762c208a38e
Reviewed-by: Robin Burchell <robin.burchell@crimson.no>
This is a version of QByteArrayMatcher that calculates the
Boyer-Moore skip table at compile-time instead of at run-time,
making this class more generally applicable than QByteArray-
Matcher itself, at least for statically-known strings.
The compile-time part requires C++14 constexpr support, but
the class should compile and work even in C++98 mode, just
with runtime initialization of the skip-table.
While touching tst_qbytearraymatcher, clean up the static
global QByteArrayMatchers there and add tests with needles
longer than 255 characters for QByteArrayMatcher, too.
[ChangeLog][QtCore] Added QStaticByteArrayMatcher.
Change-Id: I0662f262ab19b79ae4096f3ab384d5b3ada72347
Reviewed-by: David Faure <david.faure@kdab.com>
When a platform menu bar is used, the QMenuBar is hidden, so shortcuts
for QActions attached only to it do not work.
Extend the macOS-specific code to treat such menubars as visible to
other platforms, to make the shortcuts work.
The exception is made for internal QMenuBar shortcuts, which are
forwarded to the platform menu. A follow-up change will add support
for this to QDBusPlatformMenu. The updateGeometries() method is called
for platform menu bars too to make sure the internal shortcuts are
registered even if the global menu is in use.
Add two cases to the tst_QMenuBar::activatedCount() test to test
both native and non-native menu bars when possible (it now passes with
native menu bars too).
Change-Id: I2d7128512719ac199cd3f8f7ba28333d04d84ed4
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
With this new policy, after emitting 'redirected', QNetworkReplyHttpImpl
waits for client code to decide if QNAM should follow this redirect or
not. The client can either allow this redirect by emitting 'redirectAllowed'
or abort the reply.
Task-number: QTPM-236
Change-Id: Ia04619f6bd1f0caa477833ae859b24033027b2e1
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
tst_qaccessibility.cpp: In member function 'void tst_QAccessibility::treeTest()':
tst_qaccessibility.cpp:3005:75: warning: suggest parentheses around assignment used as truth value [-Wparentheses]
tst_qaccessibility.cpp:3008:75: warning: suggest parentheses around assignment used as truth value [-Wparentheses]
tst_qaccessibility.cpp: In member function 'void tst_QAccessibility::tableTest()':
tst_qaccessibility.cpp:3133:75: warning: suggest parentheses around assignment used as truth value [-Wparentheses]
Change-Id: I175af3215258c70da8284907f5ddfe95abf41029
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
QImage::reinterpretAsFormat can be used to change the format of an image
without converting the data, to correct wrong formats or narrow the
format to an opaque one if found to be opaque.
[ChangeLog][QtGui][QImage] A new method reinterpretAsFormat is has been
added to change the format of a QImage without converting the data.
Change-Id: I5e15bc5a1c474a35d3921b06299008ab2effd945
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
[ChangeLog][QtBase][General] Removed support for WinRT/Windows Phone 8.1.
Task-number: QTBUG-57288
Change-Id: Ifd6d6780cbbdb710d99556ba3d2fb2e514d4f789
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
This commit simplifies defaultParameters() to simply construct an empty
QSslDiffieHellmanParameters and assigning the DER-form of the DH parameters
to QSslDiffieHellmanParametersPrivate's derData field.
This creates a valid QSslDiffieHellmanParameters instance, but skips any
potentially expensive verification steps.
The previous implementation of defaultParameters() would use the public
fromEncoded() method to construct an instance of the default parameters.
This triggers a verification of the passed-in data, which can be expensive.
To ensure our defaultParameters() QSslDiffieHellmanParameters instance does
pass verification, this commit adds an autotest to verify that.
Fixes QTBUG-57815.
Change-Id: I6b1d9dbbfde526b232c319195ddbad42326be27c
Task-number: QTBUG-57815
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This patch makes it possible to enable/disable redirects on QNAM
level (before it was per-request only). This policy would be applied
to all subsequent requests* created by QNAM.
The policies we support at the moment:
a. Manual - that's what we always had - it's up to a user to handle
redirects.
b. NoLessSafeRedirectsPolicy - we allow http->http, http->https and
https->https redirects, but no protocol 'downgrade' (no
https->http redirects).
c. SameOriginPolicy - we check that protocol/host/port are
the same.
Updated tst_qnetworkreply.
*We previously were enabling redirect for each request, by
setting FollowRedirectsAttribute on QNetworkRequest object.
For backward compatibility this attribute has a higher priority
(if set) than QNAM's policy (and it will work as NoLessSafeRedirectsPolicy).
[ChangeLog][QtNetwork] Added redirects policy to QNAM
Task-number: QTPM-239
Task-number: QTPM-237
Change-Id: I493d1728254b71b61b5504937e8e01dca5953527
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
The size of flowPositions is larger by one than the number
of rows in the model so the last correct row number is
flowPositions.count()-2, not flowPositions.count()-1.
Change-Id: Idf8bbd155151d553947d5d299dd01ffaff0c95fa
Task-number: QTBUG-47694
Reviewed-by: Alexander Volkov <a.volkov@rusbitech.ru>
Reviewed-by: David Faure <david.faure@kdab.com>
Sometimes it is desirable to use a new connection but keep already
entered user credentials for usability reasons. This is now possible by
clearing the connection cache (but keeping the authentication cache).
Change-Id: I2f5f64836ce19f81c8525701783a3da823dd468e
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
qHash(QHostAddress) was added in Qt 5.0 (at least the version with uint seed = 0).
op==(QHostAddress::SpecialAddress, QHostAddress) was there since QHostAddress was
added before public history. Since QHostAddress does not have a \since, the I did
not supply one for op==, either.
Since the equality operator did not have unit-tests, added one.
Change-Id: I954a0df02464338f08a12ca58d4cc0ceb013e67a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QLayout::replaceWidget() doesn't delete the affected item, but returns it.
Change-Id: Ibda96e4bf2432ad13ed2908c7d37547f46e29a37
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
C++17 adopts P0021R1[1], which makes noexcept be part of the function
pointer's type and thus be overloadable. It contains some provisions for
allowing a noexcept function pointer to cast implicitly to a non-
noexcept function pointer, but that fails in the presence of templates
and additional overloads that could match the type in question.
Fortunately, the paper proposed a test macro, so we can change our
sources now and be compatible with both C++14 and C++17 rules.
This first failed with Clang 4.0 trunk. This source incompatibility is
not our fault, it's the language's doing.
[1] http://www.open-std.org/jtc1/sc22/wg21/docs/papers/2015/p0012r1.html
Task-number: QTBUG-58054
Change-Id: I2bc52f3c7a574209b213fffd14988cf0b875be63
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
So that QFlags can use an (un)signed int matching the
underlying type as identified by the compiler and not by us.
Requires fixing a few warnings about sign conversion due to
QFlags misusages in qtbase that were either plain wrong, or
were relying on the enum being backed by an (un)signed int
when it wasn't.
Keep qtypetraits.h in the source tree in order to prevent
source breaks if some downstream #includes it (note however
that it did not contain any public API).
Change-Id: Ib3a92b98db7031e793a088fb2a3b306eff4d7a3c
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This property allows to change the default behavior in
which list items occupy the entire width of the column.
Setting it to false will reduce their widths to the
minimum values, thus allowing to have intermediate free
space. Then the user will be able to begin selections
by mouse from this space.
[ChangeLog][QtWidgets][QListView] Added expandingListItems property.
Change-Id: I6bd1b147fd0335324310a165104c36f6b0d6ac9f
Task-number: QTBUG-56606
Reviewed-by: Anton Kudryavtsev <antkudr@mail.ru>
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
... along with the two matching unused methods of QDateTime's test.
Change-Id: Id11a4b1b0132587f0df451d49c0043e9425d87ad
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][QtCore] QCoreApplication::applicationVersion now defaults to
an appropriate platform-specific value. On Windows, it defaults to the
PRODUCTVERSION parameter of the VERSIONINFO resource for classic desktop
apps, and the version attribute of the application package manifest for
Univeral Windows Platform apps. On Apple Platforms (macOS, iOS, tvOS,
watchOS), it defaults to the CFBundleVersion property of the information
property list (Info.plist) file. On Android, it defaults to the
android:versionName attribute of the AndroidManifest.xml manifest
element. On other platforms, the default remains an empty string.
Task-number: QTBUG-57715
Change-Id: I26f83dd00737e06f4321cf962aa5fab8398104ec
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The style name needs to be cleared if not present in the string,
otherwise the style name from qApp->font() (which propagates to
any default-constructed QFont) remains.
Change-Id: I9b6522a39a38526cced8a11ed02ae32582026480
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Konstantin Shegunov <kshegunov@gmail.com>
The test failed if qApp->font() had a styleName() set,
when testing old serialization formats which didn't serialize it.
Change-Id: If0236d354be144b3a990e074a22f796fffb1ed18
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Reviewed-by: Konstantin Shegunov <kshegunov@gmail.com>
QVERIFY(a==b) is less useful than QCOMPARE(a, b) in case of an error.
Change-Id: Ibd294e7a1e9b55a9780551869c8477f6e41355ac
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This avoids so many complications. The prior code, using
SystemTimeToTzSpecificLocalTime(), lead to unhelpful results when the
QDateTime() implementation used MS-POSIX's defective mktime().
Although SystemTimeToTzSpecificLocalTime() is actually more correct,
we were getting inconsistent results by mixing the two: and
eliminating the use of mktime() turns out to be decidedly tricky. So,
to avoid inconsistency, stick with a UTC time (which is what FILETIME
is defined as). Change QFileInfo's methods to explicitly convert
.toLocalTime() where appropriate and document that these methods do
indeed return local time (as we conjecture has been taken for granted
by callers).
Also added a regression test for the reported case of this going
wrong. A time-stamp from before Russia's (permanent, not DST) change
of TZ could end up inconsistently handled between file-system
meta-data and raw date-time APIs, due to cross-talk between different
MS-Win time APIs.
[ChangeLog][QtCore][QFileInfo] Made sure that all file lifecycle times
are in local time. This was probably true before, but is now explicit.
Task-number: QTBUG-48306
Change-Id: Ic0b99d25c4168f623d31967bc60665c0c4f38a14
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
- Fix the case when we erroneously handled stream ID == 0 in a GOAWAY frame as
an invalid stream ID.
- _q_receivedReply: convert do{}while() loop into to while(){} to prevent
it from handling any frames after GOAWAY frame received and all active frame
finished.
- sendRequest - if we received GOAWAY, also clear spdyRequests in the connection
channel, otherwise it keeps re-trying to send requests!
- Http network connection channel never resets a protocolHandler in _q_encrypted/
_q_connected, which is BAD for HTTP/2, since HTTP/2 has unique per-connection
compression context and must be reset - now we recreate the protocol handler in
_q_encrypted or _q_connected (https/http).
- Update autotest.
Task-number: QTBUG-57600
Change-Id: Ib864ce52287bab23334ff43a83ba4b0b7cb52c60
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Updating the focus child means the focus object of the window has changed.
We need to report this to QtGui immediately so that it can e.g. inform the
input context of the new focus object, before widgets reacting to the focus
events start calling update() on the input method.
Change-Id: Ie3f7b835591e71519e3f384c2abdad53242c9736
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
The population of data rows was factored into a separate file, qutf8data.cpp, in
commit e20c4730. Merge commit 9bd03235 failed to track a conflicting change into
the new file, and brought the code back into the tst_utf8.cpp, where it has been
duplicating the utf8data data ever since.
Change-Id: I4282685b882448f927289468bd7ab340a21ea0b3
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
For language "Traditional Chinese" on iOS with region "US",
the logic was formerly to attempt a match on country/language/script (fail),
followed by country/language (which would result in script defaulting to
"Simplified"). Now, the logic is to try language/script first if script is
specified. Failing that, language/country will be attempted.
Task-number: QTBUG-39639
Change-Id: I75a774b1e66686e95167ff221458a97a7ea2660d
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Jason Erb <jason.erb@sparist.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The future tests don't need QtConcurrent as QFuture and friends are in
QtCore. The printdevice test doesn't use QtNetwork and the lancelot as
well as the testlib tests don't use QtXml.
Change-Id: I150ac99b36682aa23ad22ba943266eb0f0952838
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
This new function does the same as newRow(), except that it has a less confusing
name (in line with _add_Column()), and accepts printf-style arguments to avoid
the need to newRow(qPrintable(QString::asprintf())), a common pattern in client
code. It uses qvsnprintf() under the hoods, avoiding the need for the QString
const char* round-trip.
Port all in-tree users of newRow(qPrintable(QString::asnprintf())) to the new
function.
Change-Id: Icd5de9b7ea4f6759d98080ec30f5aecadb8bec39
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A directory is empty when it doesn't contain files or folders.
We can exploit QDirIterator::hasNext() to check whether this is the
case. This is efficient since it doesn't list the whole folder (in the
non-empty case).
Test cases are added for both the empty and non-empty cases.
Change-Id: I0f7e26782c0f97f9c16f928dab6cae37927875d8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
This patch improves the handling of mime type filters in QFileDialog.
The main change is in selectMimeTypeFilter(), which was just falling back
unconditionally on selectNameFilter(). Instead, mime type filters should
have an higher priority than name filters.
This patch also adds a new selectedMimeTypeFilter() method, which is used in the unit test.
Change-Id: Ice8bb08f5ff46e4a942d539f6001424eca878f74
Reviewed-by: David Faure <david.faure@kdab.com>
- port Q_FOREACH to C++11 range-for
- port uses of inefficient QLists to QVector or C arrays
- port uses of dynamic containers with static content, to constexpr
C arrays
- fix algorithmic mistakes:
* use adjacent_find with greater<> to emulate C++11 std::is_sorted
instead of sorting the range and comparing it with the original
(and not even using stable_sort to do this).
* use std::unique == end() to detect absence of duplicates instead
of poplulating a QSet and comparing its size with that of the
original range.
* use a simple QCOMPARE instead of populating a QSet with statically-
known content, removing known options to be able to check that the
remaining options are unknown
Fixes errors pointed out by my tree's static checks.
Change-Id: I935dbc21d56b55889d96aaf6ec179624c6ce9047
Reviewed-by: David Faure <david.faure@kdab.com>
We have to enable qt_safe_ftok with either sharedmemory or
systemsemaphore. In order to make the resulting QT_CONFIG work with the
bootstrap library we switch the features off for bootstrapping. Some
tests and examples have to be excluded when sharedmemory is not
available.
Change-Id: I3fc3926d160202b378be2293fba40201a4bf50c5
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
getMaximum() and getMinimum(), called during parsing, create new
QDateTime instances, which on Linux end up calling mktime().
Making these static (for the common case of LocalTime spec)
improves performance dramatically, when parsing several date/times.
tests/benchmarks/corelib/tools/qdatetime/ (after fixing it to
actually parse a valid date/time) says:
RESULT : tst_QDateTime::fromString():
- 36,742,060 instruction reads per iteration (total: 36,742,060, iterations: 1)
+ 24,230,060 instruction reads per iteration (total: 24,230,060, iterations: 1)
Change-Id: I0c3931285475bf19a5be8cba1486ed07cbf5e134
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
May of the tests initiate a scan / update of the network configuration
and expect the API to deliver exactly one update. This turns out to be a
race condition as the update may be emitted multiple times, as
QNetworkConfigurationManagerPrivate::updateConfigurations() is called
via posted events (queued signal emissions) from the bearer thread, and
so after creating the spy we may receive an update from _before_ and end
up emitting the signal multiple times.
Task-number: QTQAINFRA-1040
Change-Id: I931e2907f0cb86d48b4ab1a8795d75206035ea11
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Added isObsolete and setObsolete functions to QUndoCommand that signifies
a command is not functional. This is useful for when two commands are
merged in such a way that the merged command does nothing. Another
particular use is with networking commands in which the command fails
due to connection issues. The command is considered obsolete because the
undo/redo functions do nothing since the connection failed.
This property is checked in QUndoStack::push(), QUndoStack::undo(),
QUndoStack::redo(), and QUndoStack::setIndex(). The obsolete flag is
checked after QUndoCommand::undo(), QUndoCommand::redo(), and
QUndoCommand::mergeWith() is called where applicable. This allows the
user to set the obsolete flag within the QUndoCommand class and it will
be deleted directly afterwards.
Task-number: QTBUG-54970
Change-Id: Ia8e962ff3aa16515e8f9e2180aee5e1d726d5ba3
Reviewed-by: David Faure <david.faure@kdab.com>
An overflow-check needed the datum for the "min" test to be minus the
datum for the "max" test; so explicitly make the former use -max()
instead of synthesising it as min()+1. This simplifies the
explanation of why that's needed, too. Clarify the overflow-check's
comment at the same time.
Change-Id: I41f56764fdf5e8c749bfae7a685e5fb77d37b3a8
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When saving state for a 3-columns headerview and then restoring that
state onto a 5-column headerview, the headerview shouldn't suddenly think
it has 3 columns.
Rather than making restoreState() fail, we adjust for the additional
columns, so that we can still apply the customizations from the user to
all other columns (hiding, moving, etc.).
Change-Id: I3f220aa322ea8b629d2fe345f8cde13e0ea615d6
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
... after a member-function declaration: this would be a compilation error
anywhere outside of a class-definition, allowed as 'opt' inside a class-definition
and essentially not needed at all (and is already different from other
member-functions we have in the same code).
Change-Id: Ia689a41bf2a1052cd19eb8fb4766ed9635c20c88
Reviewed-by: Jesus Fernandez <jesus.fernandez@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
ISO 14443-3 is for nfc communication and uses 2 different checksums.
The existing one is from ISO 3309 and the other one is from ITU-V.41.
Both are needed to implement an own transport layer defined in ISO
14443-4 to allow nfc commands with a length above 250 byte independent
from the smartphone.
This change will avoid code duplication in QNearFieldTarget.
The private function qNfcChecksum is a copy of qChecksum.
Change-Id: I790ffec8e2ea46f88b2db6f48b64fdcb140e7b70
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The separator character is inserted in the resulting array
after every byte and is useful for MAC address output like
01:23:45🆎cd:ef, Hash fingerprints, or low level data
debug output.
[ChangeLog][QtCore][QByteArray] Added toHex() overload to
insert a separator character between the hex bytes.
Change-Id: Ibe436094badc02f3ade7751aa8b5d690599941d4
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Make it depend on the corresponding Private target of each
dependency. This way, user code can write
find_package(Qt5Gui REQUIRED)
add_executable(hello hello.cpp)
target_link_libraries(hello Qt5::GuiPrivate)
and get the private include directories for both Qt5Core and Qt5Gui.
Don't create the Private target if any of the private include
directories do not exist. This way, if user code uses one of the
targets, CMake will issue an error if the private include directories do
not exist. Unfortunately the error is somewhat cryptic (eg, 'the
"Qt5::CorePrivate" was not found'), but this is still an improvement
over an error at compile time.
This is an improvement on the situation described in QTBUG-37417 using
Modern CMake features.
Change-Id: I034f8216c3ec64d1a3309682456a713cac9bf854
Reviewed-by: Kai Pastor <dg0yt@darc.de>
Reviewed-by: Stephen Kelly <steveire@gmail.com>
This used to work only for 0- and 1-pixel wide handles. However,
and paradoxically, 2- and 3-pixel wide handles would end up with
narrower grab areas. We now ensure a 4 or 5 minimum grab area,
depending on the handle width parity.
The patch also clears the margins and mask if the handle size is
increased at some point.
Change-Id: I8a16e39fb34b5452d9021dbde8c22bec79df0243
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
Many of the tests still use the old connection signal/slot syntax for
tests. Since I recently made a change to one of the tests within the
Widgets/Util folder, I went through and updated the entire folder to the
Qt-5 connection syntax.
Change-Id: Iaaa5a38858eed41fbc897b66ef291f08458505f1
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Callers can persist a QModelIndex which was not persisted before in a
slot connected to the signal, and such a persisted index must be updated
in the course of the layoutChange.
Store the indexes to persist after emitting the signal.
Task-number: QTBUG-32981
Change-Id: Ibee4c0d84817d72603a03fe5b22fdeefeac0695e
Reviewed-by: David Faure <david.faure@kdab.com>
Similar to the fix in the parent commit, incorrect updating of the
internal data structures during layout changes can lead to dangling
pointers being dereferenced later. Moves are treated as layoutChanges
by this proxy by forwarding to the appropriate method. However, data is
incorrectly cleared prior to that forwarding. Remove that, and let the
layoutChange handling take appropriate action.
Change-Id: Iee951e37152328a4e6a5fb8e5385c32a2fe4c0bd
Reviewed-by: David Faure <david.faure@kdab.com>
In sourceLayoutAboutToBeChanged the source model update is ignored if
the affected parents are filtered out anyway. The same logic is
attempted in the sourceLayoutChanged slot, but there the early-return
logic is applied too late - the mapping is cleared before performing the
early-return. Because pointers into the mapping are used in the
internalPointer of QModelIndexes in this class, persistent indexes used
later will segfault when attempting to dereference it.
Additionally, if a parent becomes invalid as a result of the
layoutChange, it would be filtered out by the condition in the loop,
resulting in a different result in the comparison of emptiness of the
parents container.
Fix that by persisting the parent's container, and performing the test
for early-return before clearing the mapping.
Task-number: QTBUG-47711
Task-number: QTBUG-32981
Change-Id: If45e8a1c97d39454160f52041bc9ae7e337dce97
Reviewed-by: David Faure <david.faure@kdab.com>
This decouples QProcess and QProcessEnvironment, since the latter may
actually be available on platforms where the former is not.
Change-Id: I3dc799ffdf94486b64143ed01a369897fff44a96
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Previously, a zone-based time would claim to be GMT, rather than
identifying its zone properly. Sadly, testing this reveals that
proprietary operating systems don't handle abbreviations ideally.
Task-number: QTBUG-57320
Task-number: QTBUG-57298
Change-Id: I8d8b7fffdbf65ac6178a65f5fc2df4d25afb1a14
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
When the time is specified relative to a zone, the ISO date produced
lacked its offset suffix; all zones were treated as if they were local
time. Handle zone as for an offset from UTC and ensure we do set the
date-time objects's offset from UTC when it's zone-based.
Change-Id: I7c9896bb8ec0a9d89df14a6e94b005174ab9e943
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The test was so slow it was blacklisted on all platforms for timing out.
This patch lowers the timeout to a 5th and tries removing the blacklist.
Change-Id: Ib28b21de572517c548a14300f26815598efe91e2
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
It's a const parameter, so no sense copying it.
Change-Id: I4a673a6a60af9bfe7cb61ce28de2aa295fa1d069
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Make it const, initialize it instead of assigning, consolidate testing
of it round some #if-ery.
Change-Id: I2efbf58292a0edd2ceb3da8d3cc16246e84a3bac
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Such mappings are ill-defined in the presence of daylight-savings time
(DST); at its transitions, you need information about whether DST is
active or not to determine the correct UTC value. Existing code did
not have a way to be told that hint, so could not be correct.
Fixing this required changing the (thankfully private) APIs by which
QDateTime accessed QTimeZone's information stipulated by zone time.
In QDateTime, this required propagating the needed hint, when DST
status was known.
QAndroidTimeZonePrivate overloaded QTimeZonePrivate::dataForLocalTime
with an implementation that works whenever !hasTransitions(); the base
implementation handled this case lamely, so I've moved the Android
implementation there, to have only one place for both re-writes.
Amended tst_QDateTime's expected failures; passing a date and time to
the constructor *is* ambiguous when the moment indicated is in a
transition. I have changed which way we resolve that ambiguity.
Added round-trip test of QDateTime's fromMSecs/toMSecs (but as a
QTimeZone test, since that's what's actually getting tested), based on
a test-case from Marko Kangas. Initially failed for various zones,
each at one hour-offset; and, on some platforms, for some zones, at
all offsets. These last revealed that a platform may claim to have
zone information yet, for some zones, lack it (or have very incomplete
information). In each case, despite this, the platform does give
offsetFromUtc(). (The test also found another pre-existing bug on
Linux; fixed in an earlier commit.)
To accommodate these gaps in transition data, the transition-based
code now falls back to the offsetFromUtc()-based code (used when there
are no transitions) if it can't find a previous transition (which, in
any case, it needs to do its job).
Task-number: QTBUG-56460
Task-number: QTBUG-56397
Task-number: QTBUG-52284
Change-Id: I2f7422a9e9d3767940b1901d887c6a2c1f36ac9f
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Private Use Area characters are quite valid input characters when used
in combination with a custom font. Joiners also serve an important language
purpose in semitic writing systems.
Note that there is a hack where we disregard any character produced
using CTRL or CTRL+SHIFT specifically because of German keyboards. I have chosen to
keep the hack in this patch to limit the change (though I have made an exception
for ZWJ and ZWNJ since both are produced using Ctrl+Shift on Windows), but it
will probably have to be reverted.
[ChangeLog][QtWidgets][Input] Accept characters in Private Use Area, as well as
zero-width joiners and zero-width non-joiners in input in QLineEdit and QTextEdit.
Task-number: QTBUG-42074
Task-number: QTBUG-57003
Change-Id: I73f3b7d587a8670de24e902dc52a51f7721dba5a
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Add a bool *ok out parameter to qt_normalizePathSegments() and return false
when ".." are left over for an absolute path, indicating an attempt to
change above root.
Factor out static helper qt_cleanPath() to be able to pass the return value
to QDir::cd() and return on failure from there.
Amends change 63f634322b, which did
not handle UNC paths.
Task-number: QTBUG-53712
Change-Id: I3e63a5dd0259306a0b99145348d815899582f78e
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Calling QDir::cleanPath() on "//server/path/.." resulted in "/".
Factor out a function to determine the root path part of an absolute
path for later use, and handle some special cases:
- Consider server name of "//server/path/.." as part of the prefix.
- Check on the root path for WinRT.
Task-number: QTBUG-53712
Change-Id: Ibddacf06212b6fc86fa74a5e4078df6cfd5b66f5
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Namely: decltype(). Ideally we'd want C++17's template constructor
argument deduction, but instead use the C++11 solution: a factory
function. This enables using things such as lambdas in the container
argument.
Change-Id: Idba64d8069d15bbafe54cfdebe24b1fba1eb8d0a
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The ARGB32PM code-path doesn't have enough precision to accurately
render ARGB32 images, but the RGB64 code-path does. Since this is
already a slow configuration and the most costly part is the conversion
we can switch to the more accurate code-path for little cost.
Task-number: QTBUG-55720
Change-Id: Ifa0afba8d8cc0c2f699bb91f51726f4ee5228f3e
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Throw out unused code and simply format table to only care about bpp
and use it consistently for all bpp.
Also makes QImage use the 180 degree memrotate, and fixes the tiled
packed qt_memrotate270 so it can be put to use.
Change-Id: If4ef1666fca960ce8e4ce32d85dc5f347b6986f4
Reviewed-by: Erik Verbruggen <erik.verbruggen@qt.io>
Commit 2bc7a40048 taught the CoreText font database to populate the
families lazily, and in the process added a guard to ensure that we
didn't populate internal fonts (prefixed with a '.'), as these fonts
would then show up in font selection dialogs.
Commit 909d3f5c7 then added support for private fonts, by making it
possible to filter out any private fonts from font selection daialogs.
But the guard was not removed, so we were still not populating these
fonts. This guard has been removed, and the filtering function has
been updated to include the conditions of the guard.
Next, commit e5e93345c5 used [UIFont fontNamesForFamilyName:] to verify
that each family that we registered with the font database would also
have matching fonts when finally populated. This is not the right approach,
as [UIFont fontNamesForFamilyName:] does not handle internal fonts.
Instead we trust what CTFontDescriptorCreateMatchingFontDescriptors()
gives us, but make sure to register the resulting font descriptors
with the original/originating font family, instead of the one we pull
out of the font descriptor.
Finally, as of iOS 10, we can use CTFontManagerCopyAvailableFontFamilyNames
instead of [UIFont familyNames], which gives us all of the internal font
families like on macOS, instead of just the user-visible families. For
earlier iOS versions we manually add '.PhoneFallback', as we know it
will be available even if not listed in [UIFont familyNames].
The end result is that we register and populate families like '.PhoneFallback',
which is critical to supporting more esoteric writing systems.
The check in tst_QFont that styles for a given family is not empty has
been removed, as we can't guarantee that on all platforms, which is
also documented for QFontDatabase::styles().
Task-number: QTBUG-45746
Task-number: QTBUG-50624
Change-Id: I04674dcb2bb36b4cdf5646d540c35727ff3daaad
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
The function was incorrectly handling green and blue color channels
causing them to be dropped. This affects drawing non 32-bit images onto
10-bit per color channels formats such as RGB30.
Change-Id: I9211e253b1a9da0dada5c418d592a8f531265989
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
-[NSMenu itemWithTag:] clearly states that it'll return the first
item with that tag. Furthermore, when and item has been synced more
than once, it could be that more than one such item exists in the
same menu (e.g. lately changing the role of Edit->Copy).
Change-Id: I95a4f0a151659ae273ba03a3cab4a720b781fc3a
Task-number: QTBUG-57404
Reviewed-by: Jake Petroules <jake.petroules@qt.io>
This should not happen, but it's clearly not the user's fault.
So we should try to carry on as gracefully as possible instead
of letting Cocoa abort the application.
The patch also factors the repeated calls to QCocoaMenuItem::
nsItem() in QCocoaMenu::insertNative() and improves a warning
from QCocoaMenuIten::sync().
Change-Id: Id00135c219aaf40fb565b19a65cab68f6d9863b2
Task-number: QTBUG-57404
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
QHostAddress allowed assignment from a QString, but the respective
constructor is explicit, and rightfully so. So it does not make
sense that the assignment operator is provided, because of the
asymmetry caused between
QHostAddress addr = funcReturningQString(); // ERROR
addr = funcReturningQString(); // OK (until now)
By the same token, since SpecialAddress is implicitly convertible
to QHostAddress, provide the missing assignment operator from that
enum.
Add tests, rewriting the _data() function to use the enum instead
of an int to pass SpecialAddress values, and to test !=, too.
Added setAddress(SpecialAddress), since a) it was missing and
b) to share code between the ctor and the assignment operator.
Change-Id: Ief64c493be13ada8c6968801d9ed083b267fa902
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Several people agreed that the name was confusing and that this one
is better.
Task-number: QTBUG-54616
Change-Id: I31cf057f4bc818332b0551a27d1711599440207c
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Sune Vuorela <sune@vuorela.dk>
Change 3370ab9119 introduced
warnings from MSVC:
tst_qsqlquery.cpp(4005): warning C4805: '==': unsafe mix of type 'const bool' and type 'int' in operation
tst_qsqlquery.cpp(4059): note: see reference to function template instantiation 'void runIntegralTypesMysqlTest<bool>(QSqlDatabase &,const QString &,const QString &,const bool,const T,const T)' being compiled
with [ T=bool ]
tst_qsqlquery.cpp(4006): warning C4805: '==': unsafe mix of type 'const bool' and type 'int' in operation
tst_qsqlquery.cpp(4006): warning C4804: '/': unsafe use of type 'bool' in operation
tst_qsqlquery.cpp(4026): warning C4804: '+=': unsafe use of type 'bool' in operation
Extract an overload taking a QVector of values and use that for the
bool case instead of looping over min/max to generate a sequence of values
for bool.
Change-Id: I72583774e788b8df899f22ed1a64278217e664f6
Reviewed-by: Milian Wolff <milian.wolff@kdab.com>
The alpha channel of an RGB32 image was not properly ignored when doing
blending with partial opacity.
Now the alpha value is properly ignored, which is both more correct
and faster. This also makes SSE2 and AVX2 implementations match NEON
which was already doing the right thing (though had dead code for
doing it wrong).
Change-Id: I4613b8d70ed8c2e36ced10baaa7a4a55bd36a940
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
This new API addresses the use case where we want to replace
a widget by another one inside the splitter. Up to now, the
way of doing would include removing one widget and add the
new one at the same place. However, this triggers a series
of resize and paint events because of the successive changes
in the splitter's children leading to a relayout of the
remaining children.
The new widget inherits the same properties as in the previous
slot: geometry, visibility, and collapsed states. The previous
widget, returned by the function, loses its parent and is hidden.
Change-Id: I3dddf6b582d5ce2db8cff3c40bc46084263123ac
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
- Declare as Q_MOVABLE_TYPE
- Prevent QList<QPointerUniqueId> from being instantiated
(use QVector instead)
- Add equality relational operators
- Add qHash() overload
- Replace non-default ctor with named ctor.
- Add Q_DECL_NOTHROW.
- Add Q_DECL_CONSTEXPR.
- Rename numeric() -> numericId().
- Update docs.
The extension vector for this class calls for additional
properties to be added later, but these are not user-
settable. It thus suffices to rely on the only data
member, a qint64, which can be reinterpreted to an index
into an array or hash with actual objects. This allows
to make the class a Trivial Type (ie. no overhead over
an int) while still supporting later extension. Cf.
QSslEllipticCurve as another example of such a class.
The extension has to maintain the following invariants,
encoded into user code by way of being used in inline
functions:
- m_numericId == -1 <=> !isValid()
This is trivial to support. An extension could not and
still cannot reinterpret the qint64 member as a d-pointer,
but a d-pointer is only necessary for user-settable
properties where updating a central private data structure
would cause too much contention.
Add a test.
Since this type is used in other modules, keep the existing
functions, but mark them as deprecated with the expectation
that these compat functions be removed before 5.8.0 final.
Task-number: QTBUG-54616
Change-Id: Ia3ede0ecaeeef4cd3ffa94a72b1050bd409713a5
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
We parse the EXIF header in order to get the proper orientation, so
let's be a bit more careful in what we accept. This patch adds better
handling for reading past the end of the stream, plus it limits the
number of IFDs read (to avoid processing too much data) and deals with a
pathological case of the EXIF file format: EXIF (due to its TIFF
origins) permits the offset to the next IFD to be backwards in the file,
which means it could result in a loop or pointing to plain corrupt data.
We disallow any backwards pointers, since it seems that's what other
decoders do (libexif, for example).
Change-Id: Iaeecaffe26af4535b416fffd1489332db92e3888
(cherry picked from 5.6 commit 02150649f95b8f46f826e6e002be3fa0b6d009bc)
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
If 5ca9631d3a is reverted, this test
segfaults on Unity most of the times.
Task-number: QTBUG-55966
Change-Id: Ice59842e0a1a7930e3cd10c4c7319ef033fe6a58
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Also remove references to WinCE in comments.
Change-Id: I175e0ba5f9597b09532c507497a51a55f9e0b5c0
Task-number: QTBUG-56853
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Q_UINT64_C appends a literal, which causes warnings:
tst_qtextstream.cpp(2026): warning C4146: unary minus operator applied to unsigned type, result still unsigned
tst_qtextstream.cpp(2030): warning C4146: unary minus operator applied to unsigned type, result still unsigned
tst_qtextstream.cpp(2031): warning C4146: unary minus operator applied to unsigned type, result still unsigned
tst_qtextstream.cpp(2032): warning C4146: unary minus operator applied to unsigned type, result still unsigned
tst_qtextstream.cpp(2289): warning C4146: unary minus operator applied to unsigned type, result still unsigned
tst_qtextstream.cpp(2309): warning C4146: unary minus operator applied to unsigned type, result still unsigned
tst_qtextstream.cpp(2329): warning C4146: unary minus operator applied to unsigned type, result still unsigned
tst_qtextstream.cpp(2355): warning C4146: unary minus operator applied to unsigned type, result still unsigned
tst_qtextstream.cpp(2381): warning C4146: unary minus operator applied to unsigned type, result still unsigned
tst_qtextstream.cpp(2411): warning C4146: unary minus operator applied to unsigned type, result still unsigned
Change-Id: I69ac87c224b75aff059477362d8a317c7e766ec2
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
.. instead of manually casted 0s.
QCOMPARE(., nullptr) was added for Qt 5.8. Make use of the new API.
In tst_qwidget.cpp, as a drive-by, change
qApp->focusWidget() -> QApplication::focusWidget()
Change-Id: I1331b8916b026d48e01534d1ed0b3d72f3f3d50c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
tst_qtcpsocket.cpp:606:20: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
tst_qtcpsocket.cpp:670:16: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
tst_qfile.cpp(2661): warning C4334: '<<': result of 32-bit shift implicitly converted to 64 bits (was 64-bit shift intended?)
tst_qarraydata.cpp(760): warning C4334: '<<': result of 32-bit shift implicitly converted to 64 bits (was 64-bit shift intended?)
main.cpp:40:33: warning: ignoring return value of 'char* fgets(char*, int, FILE*)', declared with attribute warn_unused_result [-Wunused-result]
Change-Id: I80ccef29b71af6a2c3d45a79aedaeb37f49bba72
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@qt.io>
The check for 8x zoom was inverted and checked for 1/8x zoom.
Change-Id: I45156db709bab6b702769c2a70d4d2af51b5533a
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Compare to QLatin1String and use reinterpret_cast to fix MSVC warning:
tst_qstring.cpp(1271): warning C4312: 'type cast': conversion from 'unsigned int' to 'void *' of greater size
Change-Id: I4f26d72f0fad59e09636fe609a2772309a688e5c
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The aim of this patch is to allow the configuration of the connect
timeout used by QAbstractSocket that is currently hardcoded to 30
seconds.
Using QNetworkConfiguration for this allows to adapt the timeout per
network configuration (e.g. 2G vs wired lan)
[ChangeLog][QtNetwork] The connect timeout from QAbstractSocket
is now configurable through QNetworkConfiguration.
Change-Id: I1dc4051be2c74f925f7a9e0a9ccef332efc2e370
Reviewed-by: Lorn Potter <lorn.potter@canonical.com>
../tst_qfile.cpp: In member function 'void tst_QFile::handle()':
../tst_qfile.cpp:2661:38: warning: ignoring return value of 'ssize_t read(int, void*, size_t)', declared with attribute warn_unused_result [-Wunused-result]
tst_qstatictext.cpp:862:58: warning: unused parameter 'textItem' [-Wunused-parameter]
../tst_qtcpsocket.cpp: In member function 'void tst_QTcpSocket::abortiveClose()':
../tst_qtcpsocket.cpp:2254:90: warning: suggest parentheses around assignment used as truth value [-Wparentheses]
Test.cpp: In member function 'void My4Socket::read()':
Test.cpp:66:20: warning: 'reply' may be used uninitialized in this function [-Wmaybe-uninitialized]
../tst_qlocalsocket.cpp: In lambda function:
../tst_qlocalsocket.cpp:701:51: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
../tst_qtcpserver.cpp: In member function 'void tst_QTcpServer::linkLocal()':
../tst_qtcpserver.cpp:935:92: warning: suggest parentheses around assignment used as truth value [-Wparentheses]
../tst_qtcpserver.cpp:940:92: warning: suggest parentheses around assignment used as truth value [-Wparentheses]
Change-Id: Ic315069768bcb63a6b333c28ac65b0b992b0d43f
Reviewed-by: Jędrzej Nowacki <jedrzej.nowacki@qt.io>
Fix warning about unused variable printer in auto-test and redirects
output to qInfo() as intended.
Amends change a26435d65c.
Change-Id: Ia72a93267a54b9c4f9ef37fa058b95ef586ecc75
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
Turns the two set of tables in QDrawHelperGammaTables into two
QColorProfile classes that use similar structures and can be reused for
other gamma correction.
At the same time clean-up and improve the comma-correct blending code
to use the new profiles and QRgba64 precision.
Change-Id: I302bd87a5c836e1010fff6d633eeb56fd4ae2ff0
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
Looks up the canonical names of enumerated fonts and register them under
their preferred names if present.
Also changes the logic handling registration of english aliases, so it
is always done, even if it might in rare cases cause a double
registration since that is safe.
Task-number: QTBUG-53458
Change-Id: Ia010774b26072192b55697b717cc37442c852881
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
The prior test deemed there to be narrowing if source and destination
integral-or-enum types didn't have the same signedness; but all values
of an unsigned source type can be represented in a larger signed
destination type, so there is no narrowing in this case.
Updated QObject test-case to match.
Change-Id: I517a5997adcad70e185d7469a8d26788e463cb75
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Analogous to QWidget::setAttribute(), introduce an API to easily
enable/disable a single window flag without having to resort to
w.setFlags(w.flags() | Qt::NewFlag).
Change-Id: Ib0f7254a34c8d884cdec181c41b99e5ef035d954
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Sérgio Martins <sergio.martins@kdab.com>
By templating on the <chrono> types and unconditionally using
duration_cast to coerce the duration into a milliseconds, we
allowed code such as
mutex.try_lock_for(10us)
to compile, which is misleading, since it's actually a zero-
timeout try_lock().
Feedback from the std-discussions mailing list is that the
wait_for functions should wait for _at least_ the duration
given, because that is the natural direction of variance
(tasks becoming ready to run might not get a CPU immediately,
causing delays), while an interface that documents to wait
_no more_ than the given duration is promising something it
cannot fulfill.
Fix by converting the given duration to the smallest number
of milliseconds not less than the original duration. If that
is not representable in an int, use INT_MAX, emulating the
effect of a spurious wakeup, which are allowed to happen if
the function returns false in that case.
In the above example, the try_lock_for call is now equivalent
to
mutex.tryLock(1);
The tryLock() docs state that the actual waiting time does
not exceed the given milliseconds, but fixing that is a
separate issue.
Change-Id: Id4cbbea0ecc6fd2f94bb5aef28a1658be3728e52
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The code coerced a -123 into a QFormLayout::ItemFlags, which, however,
being an enum with enumeration values 0..2, only has valid numerical
values 0..3.
Fix by using 3 as the value to represent the invalid enum value, and
store this in a constant so as not to distribute this magic number
all around the test class.
Change-Id: Ie5e93a69ef5a3acdde43030b022e0cce8aec484d
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
The logo (microsoft.windows.softwarelogo.showdesktop.exe) is otherwise
not found.
Change-Id: Ic52329462612a027e2928922a1f9a541dcbc67a3
Reviewed-by: Jesus Fernandez <jesus.fernandez@qt.io>
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
The time stamp is added at the end of the node information and
consequently this also bumps the version.
Task-number: QTBUG-57182
Change-Id: Ia10e006f28c0b168b2bcd74ed8b7098f84d10af3
Reviewed-by: hjk <hjk@qt.io>
Change the main window to contain a QTabWidget and add a log widget
logging relevant events on the top level widgets for testing changes.
In the preview window, add new window flags of Qt 5 and output
geometry, margins and window state in addition.
Change-Id: Icec366223b6c163d58a69034687f3d9323a91533
Reviewed-by: Oliver Wolff <oliver.wolff@qt.io>
Chaining hooks together was mentioned by Ossi in the comments of
d953d9a4. This patch justs add a test that verifies that it works, and
also serves as an informal example for developers looking how to do it.
Change-Id: I53a014d5663c289ea0559e0926ed301f4e5110e6
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Reviewed-by: hjk <hjk@qt.io>
A test was directly accessing the .text member of QDateTimeParser
(which presently has nothing private). Use the virtual .displayText()
method of this base instead, to let the base have some hope of
data-hiding (maybe, some day).
Change-Id: I8b6e39fba130de56f117bffb2aec346197969c5b
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
This test fails on Windows occasionally with values just short of 800, the lowest
observed being 791. It is probably rounding somehow to 10ms segments, so allow
it to be up to 10 ms too fast.
Change-Id: Ie28e9f61588b68a9060a006f78eedc3a26d05155
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Simon Hausmann <simon.hausmann@qt.io>
QModelIndex is not safe to be used to store an index as it is designed
to be discarded right after use as the index information can change.
Therefore a QPersistentModelIndex should be used instead to store the
index. Subsequently the m_index does not need to be updated whenever
the model changes anymore as this is already done for us.
Task-number: QTBUG-49907
Change-Id: Icc93e410de2821c503ea15a7a1dd9ae32634914e
Reviewed-by: Jan Arve Sæther <jan-arve.saether@qt.io>
GCC warned:
tst_qtablewidget.cpp:30:
tst_qtablewidget.cpp: In member function ‘void tst_QTableWidget::mimeData()’:
qtestcase.h:66:52: warning: suggest parentheses around assignment used as truth value [-Wparentheses]
if (!QTest::qVerify(static_cast<bool>(statement), #statement, "", __FILE__, __LINE__))\
^
tst_qtablewidget.cpp:1523:5: note: in expansion of macro ‘QVERIFY’
QVERIFY(data = table.mimeData(tableWidgetItemList));
^~~~~~~
Fix by adding the extra parentheses, as usual.
Change-Id: I2826d7a865b4113b468d5a958ede06e03aa0e278
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
When a menu item's enabled state changes after
-[QCocoaMenuDelegate menuWillOpen:] is invoked, i.e.,
during or after QMenu::aboutToShow() is emitted, that
state change may not be taken into account. This is
because the automatic menu validation, upon which Qt
relies, is not made aware of any such change.
By calling -[NSMenu update] when syncing the QPA menu
item, we induce Cocoa to invoke -[QCocoaMenuDelegate
validateMenuItem:] and ensure that previously synced
items, whose state may have changed, will be properly
updated. This, however, has a small side effect, namely
that menu-holding items will also go through the automatic
menu enabling path and may appear disabled since, until
now, they were not properly configured. In order to solve
this, we set the action on those items as well, and make
sure that both of QCocoaMenuDelegate's relevant methods,
validateMenuItem: and itemFired:, properly process
menu-holding items.
Menurama manual test updated accordingly.
Change-Id: I62f955538b8be09b8494ea0ce87fca7910148d38
Task-number: QTBUG-56850
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
when the file's effects are discarded, the mention of the file should be
as well.
Change-Id: I894b7e2b887dd34d18533b197bfa9d0d84d647e7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
We can not improve the result from JSON parsing without changing API,
so instead recalculate the line and column based on input and offset.
Change-Id: I54149233f71023aa5d30deff854d6f3406c5c48c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
Do not consume white-space after a token before the token has been
parsed, otherwise we end up with misleading offsets. This also fixes
a wrong error of illegal number in several cases.
Change-Id: I492ca4de0346a1d0ab73b1c23d7a72dba812664c
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The test relied on the file created being automatically selected,
which sometimes does not happen when executing the entire test.
Explicitly select the file and check the selection.
Use the temporary directory for testing.
Change-Id: Ia58641c1ac32ba21effa8a5ace9623eb5d48a1c2
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Change qtConfig(opengl(es2)?) to qtConfig(opengl) as that covers
the case without any regular expression.
Change-Id: I935e3150f87e195e8bd3d0e55b4ed43572b131cf
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@qt.io>
The test created a Windows shortcut (.lnk) and checked on its existence.
It was not found in the first test since QFileSystemModel returned
the resolved file name (linktarget.txt). When fixing this by querying
QFileSystemModel::fileInfo()::fileName(), the 2nd test failed since
shortcut files are not considered system files.
Amends change 3b093034b6.
Task-number: QTBUG-53890
Task-number: QTBUG-20968
Task-number: QTBUG-29403
Change-Id: Iec58b52532b44d12759eaa6c8d63a8a4dc8d1bc3
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
the autotest was also broken, because it was created by pasting the
bogus message into the result ...
Change-Id: I02b8663b96c7d96cdb3c19639e2213e49fd2bcec
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Tests are not supposed to write into the build/application directory,
but rather should output to the temp directory.
Change-Id: Idcdf51226a2d547514aea2fbb2054998d8a3437e
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Add better boundary checks and catch (hopefully all)
cases where invalid binary JSON could cause crashes.
Change-Id: I206510b7c5e3ba953802a5f46645878e65704ecc
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
On Mac, we use QComboMenuDelegate specifically as
item delegate for the popup list. It happens that
the order of resolving the font for each item
individually would prioritize QComboBox's font
instead of whatever the assigned model's FontRole
would specify.
The fix only requires checking whether FontRole is
valid before falling back QComboBox's properties.
Change-Id: I7208ad1911b30cc52c826c1884a1e19f5acd9fb4
Task-number: QTBUG-56693
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
No-break-spaces should not be counted in the space data, but rather
be treated as any other non-breakable character. We were already
taking care of this in the loop we reach if the item starts with
a character which isn't whitespace, but there is a second loop for
items that begin with whitespace characters.
The result of this was that in certain circumstances where you gave
the nbsp its own format and made the line wrap, the previous line
would count an extra trailing space and it would swallow the first
character in its following line.
[ChangeLog][QtGui][Text] Fixed a bug where a no-break space would
sometimes cause the first character of the containing line to not be
displayed.
Task-number: QTBUG-56714
Change-Id: Idd760a389052e6de70f6cc397122b217987fa5f2
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Any other use than for enums should use std::is_[un]signed. Make this
explicit by renaming the type traits.
Change-Id: I494158563c95c710e710d0d337f4e547006df171
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Since the macro is now just a wrapper for std::is_enum,
its use is also deprecated.
[ChangeLog][QtCore][Global] Q_IS_ENUM is deprecated.
Use std::is_enum<>::value instead.
Change-Id: I09b9f4559c02c81f338cace927873318f2acafde
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
