These expressions only work because they contain no non-parenthesized
commas and an int literal is last.
Fix by wrapping only the integer literal in Q_(U)INT64_C.
Change-Id: I6b8e508b6c7c022f4b3342f65c26aab89ce17702
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
A static_cast never returns nullptr unless its argument
already was nullptr. But we dereferenced 'event' already
by the time we reach this code, so the if is always true.
Fix by removing the temporary variable.
Change-Id: Ia869d37eda74f0bcdd616e1f57f429cc86e9e525
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
sync() is unconditionally declared in the QGuiApplication header, but
the definition was under QT_NO_SESSIONMANAGER guards.
This commit moves the definition of sync() outside of
the QT_NO_SESSIONMANAGER guards, since the sync code has nothing to do
with session management.
[ChangeLog][QtGui][QGuiApplication] Fixed a bug that would cause
QGuiApplication::sync() to be left undefined for Qt builds without
session management support.
Change-Id: Ieb46f7c90c9193e89469126170117d9df672f4cb
Task-number: QTBUG-51703
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If a palette is set on the application object and the user does
something to trigger a theme change, i.e. connects via remote desktop
or logs out and in again, then it will cause Qt to render incorrectly.
Therefore we should only update the palette from the new theme if we
don't have our own already set.
Task-number: QTBUG-52962
Change-Id: I4e2288efd82ad98b698cc09f26ad188064ec7b2a
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Otherwise, float numbers are formatted using a decimal comma
in German, causing huge diffs and failures.
Change-Id: Icd85a293d0564cac6be244eb0793611920d0c89c
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
FreeBSD < 10 doesn't have the LLINDEX macro either in net/if_dl.h, so besides
OpenBSD yet another condition to declare the LLINDEX macro for systems where
it isn't present does make it more complicated than replacing its usage with
the actual code.
Change-Id: I7e8ef3e265564526e05ec3115f9fa765d399f045
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
1) In general it's unsafe to let exceptions propagate through Qt code,
so document that.
2) Add a note that overriding notify() makes sense only in Qt 5, in Qt 6
it's going away.
3) The advice applies also to applications not using QApplication, but
just QCoreApplication.
Change-Id: I4f6e74c53da757faf2eeaa9de226ceba55c52536
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Martin Smith <martin.smith@theqtcompany.com>
(QT_VERSION % 0xffff00) is useless for now, as QT_VERSION < 0x1000000
(for now). The author of this code probably meant to use bitwise-AND.
But even that is unnecessary as the right shift discards the lower 8
bits anyway.
Change-Id: Ie585843cfb684bc3b6e3fffd145d533b05288dfc
Reviewed-by: Olivier Goffart (Woboq GmbH) <ogoffart@woboq.com>
... and reject invalid ones. There was one error: we accepted schemes
starting with pluses, dashes and dots.
Change-Id: Ie585843cfb684bc3b6e3fffd145cfe12227ec4ad
Reviewed-by: David Faure <david.faure@kdab.com>
This fixes the 2. of QTBUG-52108
Change-Id: Id887f470c7822f6b264d6b739e8658d9809f6609
Task-numer: QTBUG-52108
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
If QMainWindow::GroupedDragging is enabled and there are QDockWidgetGroupWindow,
we should still show actions for these QDockWidgets in the context menu
Addresses point 4. of QTBUG-52108
Task-number: QTBUG-52108
Change-Id: I11ae401c4fe15e213b0f26e7579634e2062e953c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
This will allow dropping of files from Qt applications to applications
like Skype, which only accept "text/plain", but not "text/uri-list" or
"text/x-moz-url".
Task-number: QTBUG-53238
Change-Id: I01bca5c8e20647cedfc9323f542ab07f0cc48658
Reviewed-by: Dmitry Shachnev <mitya57@gmail.com>
Reviewed-by: Błażej Szczygieł <spaz16@wp.pl>
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
A Qt5 program writing a null QTime() using setVersion(QDataStream::Qt_3_3),
and then a Qt3 program reading that, would lead to a weird QTime,
with isNull=false, isValid=false, hour=1193, minute=2, second=47, ms=295.
This commit restores interoperability, by writing out the expected value
(0) for a null QTime rather than the -1 value used by Qt4 and Qt5.
Change-Id: Icde468a8f6fc9434ef7018296725819b44d672af
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Be explicit on how to check whether parsing succeeds.
Change-Id: I44f408cb6e5a830826b84dfb3a8af331f03e58cc
Reviewed-by: Topi Reiniö <topi.reinio@theqtcompany.com>
NetBSD is heavily dependent on using rpath, so we need to add the
lib dir QMAKE_LIBDIR and QMAKE_LIBDIR_X11 to QMAKE_RPATHDIR
explicitly to avoid linker errors. See http://www.netbsd.org/docs/elf.html
for more info.
Change-Id: I225143d5e2d9a125060b14e3a8a7953927d63b33
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
1) To describe a protocol version we should use an "ordinary" name,
not use the values out of the QSsl::SslProtocol enum.
2) Say that we support the latest stable TLS version (1.2, not 1.0).
3) Fix a statement about which protocol is the default one.
Change-Id: I18732914d55060a0c3920f7082f986c262a71ded
Reviewed-by: André Klitzing <aklitzing@gmail.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
10586 reflects Update 1, which is the mininum supported version for many
months, hence reflext this in the manifest template as well.
There are additional features (like drag and drop) which require and
even later SDK version. However, they do not reflect the minimum.
Change-Id: I6d71dc499c928ed98c8a25283e0b53994317bb00
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Restore code path returning the resource pixmap for platforms
that do not have themes in QCommonStyle.
Amends change b657496a0b.
Task-number: QTBUG-54425
Change-Id: I764408622b825b86afbe7ccf37e1498d3efb3850
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
It could be reached when QT_BOOTSTRAPPED was defined.
Change-Id: I632d6f908a3bcbde81a6ebbadcaf2800dfe1449d
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Seems the previous check was a leftover from debugging. Tests still pass
and loop checks properly now.
Change-Id: Ic12cd49881f6d146687e257794b3028f6c8e874c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
1. QSslSocketBackendPrivate::transmit can invalidate SSL context
causing subsequent SSLWrite or SSLRead calls to fail; these report
errSecParam (as null context is an invalid parameter) spuriously,
when we should rather report the cause of invalidation. The OpenSSL
backend can trigger this when it aborts connection during an SSL
handshake, on an sslErrors signal. As transmit() emits readReady(),
a directly connected slot can trigger the same problem if it aborts or
closes.
2. If during peer verification (and in checkSslErrors) we disconnect
on sslErrors signal, peer verification must be considered failed and
should not continue handshake/set connectionEncrypted.
Task-number: QTBUG-52975
Task-number: QTBUG-53906
Change-Id: Iacd3b489a4156e25ef3460ace40d21f34a946bed
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
We should not remember the wrong undocked geometry. If the dockwidget is not floating,
the geometry is not relative to the global coordinate, it makes no sense to store it.
Task-number: QTBUG-53808
Change-Id: I242467d8da62d7c787eca2c784aeec646236cb44
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Calling `xkb_state_update_mask` with correctly set `depressed_mods` allows xkb to
return keys on level three or above (and not the equivalent level one key).
To preserve level two shortcuts (return equivalent level one key)
`depressed_mods` gets only set, if the pressed key is on level three or above.
Example shortcuts which now will work:
Shortcut German Layout (de) [AltGr is a level three switch]
Ctrl+@ Ctrl+AltGr+Q
Shift+1 Shift+1 (as before)
Shortcut German Neo Layout (de neo) [1] [AltGr is a level five switch]
Left AltGr+S
[1] http://neo-layout.org
Task-number: QTBUG-53121
Change-Id: I637a01edc9f2f92a5d3e7a24f5051fb1d3ac2f7f
Reviewed-by: Gatis Paeglis <gatis.paeglis@qt.io>
The file is read using CRLF line convention on Windows.
Task-number: QTBUG-24226
Change-Id: Ie08fa603e29c80a42de4bfbfd1f4237f53c22b98
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@theqtcompany.com>
Point to the README.md of the project; the old URL
http://code.google.com/p/angleproject is now redirected
to the bugtracker.
Change-Id: I293fc150d5b6c08f16effe8921010050faa264b5
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
Silence warning in case DPI awareness was set externally unless
debug is enabled.
Task-number: QTBUG-54416
Change-Id: Id48769e3d4be3047f582e331633905c640930f21
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
"GUI application" is quite confusing, because in fact, these models
are part of QtWidgets and thus require QApplication instead of
QGuiApplication.
Change-Id: I35ccc8bfeb74c75a84b2ffbe1cab0c0839495980
Reviewed-by: Sze Howe Koh <szehowe.koh@gmail.com>
Reviewed-by: Topi Reiniö <topi.reinio@theqtcompany.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reference an SQLite3 function to verify that the library is being
linked. Discovered that the test didn't do this when I switched the
Windows configure to use a compile test to determine whether the
system has SQLite3. The test passed even though the initial
configure changes failed to provide the test with information about
the SQLite3 libraries.
Change-Id: I3114cfc2dec3a42a60c8e1e432eb8375b440d7e0
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
windows and xcb enables SwitchableWidgetComposition meaning that widget
backing stores will fall back to the normal flush path when no render-to-texture
widgets are visible anymore in the window. This switch however can lead to
artifacts with the image of the rtt widget remaining visible until the next
full bacinkgstore sync. The safe and simple way around this is to do the
switch only in the next flush, keeping the flush where the switch is
discovered on the OpenGL-based composition path still.
Task-number: QTBUG-54241
Change-Id: I1d3f10999f69c58efa791dd724891add56949dee
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
Where accept4() is used, NetBSD offers paccept() as a replacement function.
Modify check for using accept4() and use paccept() on NetBSD.
See http://netbsd.gw.com/cgi-bin/man-cgi?paccept++NetBSD-current
and http://reviews.llvm.org/D12485
Change-Id: I9b3ecba5f3afad6c357d3f7b8f89589bf313e273
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Add pkg-config to the libpng usages as not all systems have the
symlink libpng.so -> libpng<version>.so (affected: NetBSD) that changes
with the version of the lib. If no-pkg-config is used, use -lpng as
before. Tested with FreeBSD 10.3, NetBSD 7.0.1 using png 1.6.21
Change-Id: I5c87f380c84da3d5c56c94da53adb900791c8caa
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Before, we were relying on the ZOrderChange event to update the
windows title or other flags of a floating tab window when tabs
are changed. But this did not catch all the cases. For example,
the first tab switch, or when tabs are dragged out.
Task-number: QTBUG-53754
Task-number: QTBUG-52107
Change-Id: I1523ce85ceaa95f044bd81f8ccbac0a86978fb33
Reviewed-by: Sérgio Martins <sergio.martins@kdab.com>
The signal was connected to the wrong slot.
Regressed in 2fe56e37ed.
Change-Id: I33135fc79c3585dfbe0f6ebc04f819e919ed9ed7
Reviewed-by: Sérgio Martins <sergio.martins@kdab.com>
This can be helpful for packaging and when one wants to limit the
features to ES 2.0 to ensure the same code is used on both build
machine and deployment machine. It also prevents inclusion of
GLES3/gl3.h. Windows configure.exe doesn't do auto detection of
GLES3 so it does not get the additional option.
Change-Id: I8750b41635e41bd0ac41d9d59d93570f7d2196e6
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
The compiler didn't complain that they were unused or -Werror / -WX was
not active.
Change-Id: Ib57b52598e2f452985e9fffd145a7b63a32189fd
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@qt.io>
The declaration and definition of the forwarding functions for PSK
differed which leads to link errors with some versions of openssl.
Change-Id: I40410f62a584c5dbd2acf5c90422e1243514f8fd
Reviewed-by: Richard J. Moore <rich@kde.org>
This follows up ab599a3931, which did not
take installation into account.
Task-number: QTBUG-54036
Change-Id: Ic1b3acb8984255dd1ca1c288b7b150814ce9e606
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
A prior commit has already added the resetting of QMAKE_LFLAGS_NOUNDEF
in corelib.pro for FreeBSD due to environ(7) not being part of libc.
OpenBSD has the same issue, so add it to the list of BSD systems
affected for resetting the flags for qtcore.
Change-Id: I50a62271ffa05a9976e802de420d47a1425359c4
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The fix for QTBUG-35927 introduced a too strict check when scaling from
a 16-bit source to a 16-bit destination. This patch changes the limit
to adjust to source type.
Task-number: QTBUG-54281
Change-Id: I6dd2bb8308f77520c00fa3ef6643a42462c5d351
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
... for a loooong time.
it was replaced by plugin_with_soname (which is unused so far).
Change-Id: Ifc377d155d6eac41e85f3a0914ed817d55b5648b
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
the tests would inherit MAKEFLAGS, with somewhat predicatble results.
Change-Id: Ia17638f6229d0ae86f5558726850040703d90044
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>