clang warned about result being uninitialized if iface is nullptr. Return
a properly initialized result in that case as well.
This might break RVO, but the alternative is to always initialize result,
even if we are going to call the getter anyway, which I assume would be
more expensive.
Change-Id: I5d6d243b3094b79bf021725d017be5c72b1089bb
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The specific mentioning of macOS 10.2, 10.3 goes back to Qt
4 times. Anyhow, both versions aren't supported anymore, and
the logic in qsettings_mac.cpp is the same for all versions.
Pick-to: 5.15
Change-Id: Ibac503cb7c8563dec8560cc41c471c1db0f20566
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Fixes a regression introduced in commit 748b3b9c89 for builds
that are both not a QT_SUPERBUILD and not QT_WILL_INSTALL.
Change-Id: I52b920176a2696fa6206b89b2b69ae1a7f3fbc25
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
It is an important new details in cookies, as a minimum pass it through,
before we add API for it.
Pick-to: 5.15
Change-Id: I5222a24e0f50f3822a94cce126b5055fed1a8008
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Please note, that in case of run with promise it doesn't make
sense to provide the overload taking the FutureResult, as if we are
going to ignore the returned QFuture object, we can't communicate
with the passed QPromise.
Fixes: QTBUG-87083
Change-Id: I4066506736c2bbeea3e42030b9495f13e06cb27e
Reviewed-by: Sona Kurazyan <sona.kurazyan@qt.io>
it is only used by QWin32PrintEngine and we know for sure
QWindowsFontEngine::handle() returns HFONT
Change-Id: I7656801e4642caf7df612d2f686061dca92707e0
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Otherwise XOpenDisplay in a newly spawned process may fail with
a 'No protocol specified' message (as it recently happened in
CentOS 8.1 vm).
Fixes: QTBUG-87621
Pick-to: 5.15
Change-Id: Ib6c08c7f154fb2a126d32a4aa52b535e5daa1589
Reviewed-by: Liang Qi <liang.qi@qt.io>
As advocated in a ### Qt 6 comment.
[ChangeLog][QtCore][QItemSelectionRange] QItemSelectionRange no longer
supports ordering. The prior ordering was inconsistent with equality
and should not be needed.
Task-number: QTBUG-85700
Change-Id: I5eb372c203cae19db40fa67f706d911785652d5f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Ready for removal at Qt 6, as advocated in a ### comment.
It was never done consistently with operator==(), apparently, and
should not be needed in any case.
[ChangeLog][QtCore][QItemSelectionRange] Ordering of
QItemSelectionRange is now deprecated. It was not consistent with
equality and should not be needed.
Task-number: QTBUG-85700
Pick-to: 5.15 5.15.2
Change-Id: Ie99294bd7fc18f2a497598ae08840886b0a6d62d
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The top-level prepare_docs target is supposed to run before the
generate_docs target.
The repository-level targets like prepare_docs_qtbase now also run
before their respective generate targets.
To achieve that, several intermediate targets had to be introduced.
The dependencies for top-level generate_docs look like this:
/--> generate_top_level_docs_Core --\
generate_docs ---> generate_top_level_docs_Gui -----> prepare_docs
\--> ... --/
The dependencies for repo-level generate_docs_<repo> look like this:
/--> generate_repo_docs_Core
generate_docs_qtbase ---> generate_repo_docs_Gui
\--> ...
generate_repo_docs_Core --\
generate_repo_docs_Gui -----> prepare_docs_qtbase
... --/
Analoguous for qch_docs.
And last but not least, the module-level generate_docs_<module> depends
on prepare_docs_<module>, just like before.
The strangely named top-level install targets have been renamed to
install_html_docs, install_qch_docs and install_docs.
The html_docs target is now merely an alias for generate_docs.
Apart from prepare_docs, the top-level targets do not depend on the
repository-level targets anymore. Targets that are just an alias (docs,
install_docs, ...) have been re-defined to depend just on the respective
top-level targets.
Fixes: QTBUG-87758
Change-Id: I24466d3a252d518a30a2064bf876be881c46231f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
- Extended the documentation talking about it
- Initialize members in the header rather than in the ctor
- Some formatting changes
- Prefer connect-ing to QNetworkReply rather than QNAM for sslErrors
- Because we didn't use the QNetworkReply* argument
- Put the QNetworkReply pointer in a managed pointer
- Removed the code explicitly handling a redirect (it's the new default)
- Edited HttpWindow::httpFinished so that there're less places to reset
the reply pointer
- Updated some ifdefs I didn't update when I was revamping this example
3 years ago
Task-number: QTBUG-87306
Change-Id: I10a6f756c09908f199ac9c61e28b49625af10105
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Following 77d812683f QMutexLocker is now a
templated class which should in most cases be deduced automatically.
Doesn't work here because of the global static wrapper.
Change-Id: I62fda0651eac12f3234396cb7e41a26df8cc8b46
Reviewed-by: Timur Pocheptsov <timur.pocheptsov@qt.io>
Append was previously optimized for lhs being empty but it should've
also taken into account if space had been reserved.
Apply the same optimization to prepend while we're at it.
Change-Id: I5e5d33a3189b9ad88d45e858a2ac412cbc294f79
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
[ChangeLog][QtCore][QLocale] Deprecated several Language and Country
aliases, ready for removal in Qt 6.0, in favor of their newer names.
Task-number: QTBUG-84669
Pick-to: 5.15 5.15.2
Change-Id: Iebaa0a5a77bfa12f7014de53fab4a25b5f1cc92c
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
These are languages for which CLDR does not even recognize the claimed
language code (three-letter codes except for bh = Bihari, which might
be an old name for bho = Bhojpuri, which CLDR does give, but provides
no locale data using it).
[ChangeLog][QtCore][QLocale::Language] Many obsolete language names
are now deprecated in preparation for removal at Qt 6.0. No data has
been available for any locale using these languages since CLDR v29 (at
least; Qt now uses v37).
Task-number: QTBUG-84669
Pick-to: 5.15 5.15.2
Change-Id: I2bf2d49211ade7cc511277f35fb1a247e7048b31
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
There is 1 pixel of a rounded corner visible both on NSButton and
NSPopupButton in a tab widget (all orientations) - adjust the rectangle
for this.
Pick-to: 5.15
Pick-to: 5.12
Task-number: QTBUG-86513
Change-Id: I5e203adc583d2fba6323b18328ccbc8b0c0666ea
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
It's documented to be a workaround for VC++2017 and earlier, which are
all not supported in Qt 6 anymore. VC++2019 does not show the problem.
Change-Id: Ie66b303a75bb5791675fc9e62bf4a84510068d6d
Reviewed-by: Keith Kyzivat <keith.kyzivat@qt.io>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
First we refactor QTouchOutputMapping into a QOutputMapping base class and
a QDefaultOutputMapping subclass, because it will be used to map more kinds
of devices, not only touchscreens.
On WebOS, the plan is to have a custom subclass that overrides an
additional windowForDeviceNode() virtual function, so that events from
specific devices can be sent to specific windows. But in the future,
Qt may have a more generic mechanism for mapping devices to screens,
and of course windows are displayed on screens; so this direct
device->window mapping is likely to be temporary.
In the QT_QPA_EGLFS_KMS_CONFIG JSON configuration, symlinked device
nodes are now supported.
Task-number: QTBUG-85268
Change-Id: Id1f0bb59f4a439abaec6bd35016c95de1cbdb26a
Reviewed-by: Elvis Lee <kwangwoong.lee@lge.com>
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Amends 3310e13a17. The explicit hovering state
is only updated when handling MouseMove events, and those are only
delivered when mouseTracking is set. Without mouseTracking set, the state
was always false, and QPushButton didn't set the MouseOver style flag.
Ignore the new state if mouse tracking is not set.
Task-number: QTBUG-87706
Change-Id: I2718fb23c206fd8dfd427edc987ff193ba1be8a0
Reviewed-by: Doris Verria <doris.verria@qt.io>
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
Testing the mouseMoveCount before XFAIL'ing before then testing the
mouseRelaseCount was anyway wrong.
Change-Id: I666f143ff15088562fc63f833f5785f870de6f26
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The examples use an intermediate object library to avoid duplicate
file compilation. The examples worked when built as part of Qt
because the shared directory was always added, and Qt::OpenGL is
available implicitly.
Change each project to add_subdirectory(../shared) if the object
library is not available, thus making the examples build as standalone
projects.
Call find_package inside the shared project, to ensure the Qt packages
are found.
Create an alias called 'painting_shared::painting_shared' and link
against that to ensure that any failure is caught at configure time
rather than build time.
Adapt the pathstroke example to use the object library.
Comment out the code for the OpenGL scopes, because it's handled
by the object library.
Make sure the OpenGL dependency is public.
Make sure to run moc and compile the OpenGL specific files as well.
Task-number: QTBUG-87444
Change-Id: Ib0ecb68948581c5267ca04f19d8043fa44ff3d54
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
The value is useful for QPA plugins built in repos other than qtbase,
to decide if it should be a default plugin or not.
Currently useful for qtwayland.
Also export a qmake value assignment when doing static builds, just
like src/gui/configure.pri does.
Change-Id: I1253f1a7e178b24b16e2615ba20d1e92b0b87b1a
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Was not removed when it was inlined above it.
Change-Id: Ie81bd9273108920031b235bdf1f13439711e5fec
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
This reverts commit 1918c689d7.
The template gets always instantiated in QObjectPrivate::connect, even
if the connection types is not Qt::(Blocking)QueuedConnection. For
non-queued connections we however support using incomplete types in
connect. The only way to fix this would be to make the connection type a
template parameter of QObjectPrivate::connect (or at lesat pass some
compile time constant indicating "blocking"-ness) along, so that we can
use if constexpr instead of if. As all involved classes are private, we
can postpone investigating this solution to 6.1
Change-Id: Ieffaf015f8e60ca6ac6f85eb9e2756e480060b4f
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This patch reverts the last attempt to fix it:
4a1de178c9.
In addition, instead of using imprecise QTest::qSleep()
we trigger a single shot PreciseTimer twice
and gather the measurements in lambdas.
We wait for lambdas to be executed - we give it
twice as much time as is in theory needed.
Afterwards we verify all the data collected in lambdas.
Fixes: QTBUG-82825
Change-Id: Ib691f5f23a92fb8b41a24f7b603981d9c9450ddc
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
qmake currently doesn't have a doc target in CMake. In qmake builds, the
doc target is in qtbase/ (not in qtbase/qmake). This patch mimics the
mechanic used in QDoc, and adds this as a special case (as the project
file doesn't contain the doc target).
Fixes: QTBUG-87868
Change-Id: Ib1ca249465c5df2f22ba73084c680781e595c30a
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Otherwise we get error messages from CMake.
Change-Id: I374b87e38550062b841b7eacf5fbb6bb5ccbdbde
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reduce ADL noise.
Clean up documentation and parameter naming a bit, while at it.
Change-Id: Ie9eb2a63b8e87a9ffc019b8fff5bd1c6bafaaf43
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Allow CMake for Android to use ANDROID_NDK_ROOT to deduce the path for
QT_CHAINLOAD_TOOLCHAIN_FILE instead of the user providing it manually.
Change-Id: Ida728011d5ca8d5a723d341ea77b173e8f105f8c
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
As well as the MACOSX_BUNDLE properties as necessary.
Task-number: QTBUG-87664
Task-number: QTBUG-86827
Change-Id: I7677449a26d51fa853bd67bab6b3b61afbd2b12f
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Now that qt_add_executable doesn't set the WIN32_EXECUTABLE and
MACOSX_BUNDLE properties anymore, pro2cmake needs to look at the qmake
example projects and generate appropriate set_target_properties calls.
The relevant CONFIG entries to look at are windows, console,
app_bundle and cmdline.
CONFIG += windows implies 'subsystem windows' on Windows, which maps
to WIN32_EXECUTABLE == TRUE.
CONFIG += console implies 'subsystem console' on Windows, which maps
to WIN32_EXECUTABLE == FALSE. Aka the opposite of CONFIG += windows.
Whichever is the last one set, cancels out the other one.
CONFIG += app_bundle implies a macOS bundle executable, which maps
to MACOSX_BUNDLE == TRUE.
CONFIG += cmdline is the same as CONFIG += console and CONFIG -=
app_bundle, aka WIN32_EXECUTABLE and MACOSX_BUNDLE set to false.
In qmake, if no CONFIG is specified in an example project,
the default is CONFIG += windows app_bundle, aka WIN32_EXECUTABLE
and MACOSX_BUNDLE set to true.
The script uses a heuristic to try and not write the properties for
every single subscope, except for values different from the default.
This is not strictly correct, but it covers most use cases, and keeps
the generated projects a bit cleaner.
Task-number: QTBUG-87664
Task-number: QTBUG-86827
Change-Id: If05606ec3205e0fe7c1803c07e114d9fd9c3e4f7
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Make it clear in the docs that an alternative to calling QWidget::setLayout()
is to pass the parent widget to the Q*BoxLayout constructor. This basically
just copies the relevant bits from the the docs of QWidget and Q*Layout.
Change-Id: Id196dcdf9a876d9141aa145f23a83c45f8cda5f8
Pick-to: 5.15 5.12
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
