- process environment/DNS are OFF for INTEGRITY
Task-number: QTBUG-96176
Pick-to: 6.2
Change-Id: I189a97f88c96a428586c31a66b8d250e04482900
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
QVLA itself is non-relocatable due to self references. (ptr pointing
to array[Prealloc] as long as capacity < Prealloc)
Seems we shot ourselves in the foot in multiple places with this.
Pick-to: 6.2 6.2.0
Fixes: QTBUG-96619
Change-Id: I57a2ce539b671326cd352dbe57a1f3d4c46a6456
Reviewed-by: Tobias Koenig <tobias.koenig@kdab.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The QDoubleValidator::setRange() used to have 3 parameters, with
the third one (the number of decimals) having a default value of 0.
Such default value does not make much sense for a *double* validator.
Also, since a default value was used, omitting the decimals was
silently overwriting the previous decimals value, discarding the
value that could be previously explicitly specified by user.
[ChangeLog][QtCore][QDoubleValidator][Important Behavior Changes] The
QDoubleValidator::setRange() method now has two overloads.
The first overload takes 3 parameters, but does not support a
default value for decimals.
The second overload takes only two parameters, not changing the
number of decimals at all.
Hence, the number of decimals will only be changed if the user
explicitly specifies it.
To maintain the old behavior of setRange(), pass 0 as the 3rd
argument explicitly.
Note that it is a source-incompatible change. But it should be fine,
because using QDoubleValidator with 0 digits after decimal point does
not make much sense and so, hopefully, is not that common.
At the same time, change the default-constructed QDoubleValidator
to use -1 for decimals, which allows arbitrarily many digits in
the fractional part. The value was previously 1000, which allowed
more than anyone would reasonably use, so this should make no
practical difference.
Some more unit tests to cover the behavior of the setRange()
overloads are also added.
As a dirve-by: remove unnecessary QValidator::State to int conversions
in the unit tests. QCOMPARE is capable of comparing these enums and
provides a better output in case of failure for enums.
Task-number: QTBUG-90719
Change-Id: I523d6086231912e4c07555a89cacd45854136978
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
It is no longer handled separately from Android.
This effectively reverts commit 6d50f746fe
Change-Id: Ic2d75b8c5a09895810913311ab2fe3355d4d2983
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
...when starting a render/compute pass.
This matches most other backends in fact, the Vulkan backend has
just certain historical differences, and is complicated due to the
fact that it has the option of using secondary command buffers for
passes that specify ExternalContents (to support the case of wanting
to issue direct Vulkan commands in a code block surrounded by calls
to beginExternal and endExternal).
Not resetting state such as the currently bound index buffer when
starting a pass quickly blows up when two consecutive render passes
use different settings, one targeting the primary while the other
the secondary command buffer. Instead of further complicating the
logic, just reset the relevant state in every begin(Compute)Pass.
Comes with an autotest that is crafted so that it manages to
downright crash when run with Vulkan without the fix to the backend.
Fixes: QTBUG-89765
Pick-to: 6.2
Change-Id: I8dc47bd179c17d45a0556ec31200dc90c4b67ca5
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
The provided implementation tries to fix positions for the group
separator.
In case of scientific notation it can also converts the value to
normalized form.
It uses QLocale::FloatingPointShortest internally to convert the
double value back to string, so the number of decimals may change
after calling this method.
Change-Id: I963bc5f97b653e2bb912f4b95b09a4d1ee201e7f
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Follow what has been done for QRhiShaderResourceBindings. Have a way
to retrieve an opaque blob (that just happens to be a list of integers)
so that a simple == comparison can be used to determine compatibility
even when the objects from which the blob was retrieved are no longer
alive.
The contract is the following:
bool a = rp1->isCompatible(rp2);
bool b = rp1->serializedFormat() == rp2->serializedFormat();
assert(a == b);
Pick-to: 6.2
Change-Id: I45e7d05eeb6dfa2b2de474da0a0644912aaf174a
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Christian Strømme <christian.stromme@qt.io>
a332f3fabc disabled resolving all fonts
on the system for every font lookup, which was a significant startup
time improvement. But it also caused a regression: When a font has
an alias which shares the name of a proper font, then this would
not be resolved correctly.
This is fairly typical on Windows/GDI due to backwards-compatibility.
Instead of being collected under a shared typographical family, fonts
are disambiguated by adding the style name to the family name. The
proper typographical name is still available, but this is not
enumerated by the system.
So "Segoe UI" for instance, will be available as "Segoe UI",
"Segoe UI Light", "Segoe UI Bold" etc.
When we populate family aliases, we register that "Segoe UI Light"
is actually "Segoe UI" with Light weight, and prior to
a332f3fabc this would be done implicitly.
But after the optimization, we would only populate family aliases once
we stumbled over a font request for a non-existent font. For "Segoe UI",
we would simply return the regular weight font as the best imperfect
match.
The fix is to populate font family aliases not only when the family is
non-existent, but when the match is imperfect, e.g. if we are asking
for a Light weight font and only finding a regular one. User code can
still avoid this somewhat expensive operation by using the full
family names on Windows.
This also requires a fix to a test. When removeApplicationFont() is
called, we invalidate the font database, so it will be reset to a state
that does not contain the family aliases. Therefore we cannot guarantee
that it is identical to what it was before the test started, since this
depends on what has happened previously in the application.
[ChangeLog][QtGui][Text] Fixed an issue where some font styles and weights
would not be selectable. This was especially noticeable on Windows.
Pick-to: 5.15 6.1 6.2
Fixes: QTBUG-94835
Change-Id: I892855edd1c8e3d3734aace396f6000d897d2ec4
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Export configuration() and setConfiguration() from the offscreen
platform plugin using QPlatformNativeInterface. tst_qighdpi can
then resolve and make use of them since it always uses the offscreen
platform plugin.
Add screenDpiChange() auto test.
Change-Id: I459b4df5d94ec4991234a346e3a94618cb3485e9
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Noticed the missing tests while implementing fixup() for
QDoubleValidator.
Change-Id: Ic0e053a6385e311e4a491c8bff8ec7fbb83c3944
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Be idiomatic and return the output iterator one past the last element.
Otherwise passing in a plain pointer (as exercised by the autotest now)
fails to function because we write over the same 4 elements again and
again for each binding.
Pick-to: 6.2
Change-Id: If74463fa5140ffa2b1d5be97b71868848ad46614
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
...by the Qt Quick renderer, for example.
A typical Qt Quick material binding set serializes to 8 uints. This
would not demand a container like QVector. However, being implicitly
shared is essential here due to the intended usage (query the
serialized blob, put it into a cache key, hash it, compare it, all
without any copying and new allocs; we can afford an extra alloc
upon each srb construction, but don't want more afterwards in the
rendering engines)
Also make it clear in the pipeline docs that the optimization Qt Quick
is (soon going to be) doing is legal. (the srb ref in the pipeline can
be dead and dangling as long as every call to setShaderResources()
specifies a layout-compatible alternative)
Pick-to: 6.2
Change-Id: I97efbea1fa3516b10c9832adbab0a21b7bc0845d
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Verify that closing a QWindow using either the close()
API or a close event works as expected, and that the window
can be re-created. Also test QWindows with child windows.
Task-number: QTBUG-46701
Change-Id: I4c12452ff58e1233536c2d6932e72cf924d8ed74
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@qt.io>
We can't really compare two NaN's. Should use qIsNaN() for that.
Pick-to: 6.2
Change-Id: Ia514cabe65cfcdeafb39cab91ecdb66f8fae725c
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
When using NoFontMerging, no fallbacks should be resolved. If the
font does not support a specific character in the text, we should
display a box instead of merging it with another font.
But in practice, Qt would still apply the fallback mechanism for
one specific case: If the font itself does not support the script
of the text, we would get no match and do a search for a fallback
instead. Since NoFontMerging is set, we would then force this
as preresolved for *all* scripts in the QFont's private data
(logically, the match should only have a single response for
NoFontMerging).
The end result was that if you set the font family before updating
the text, you would get broken rendering. This can happen e.g. in
Qt Quick, where you could update the font family of a text label
while it contains characters which are not supported by the new
font. Qt would then pick a fallback instead. When you subsequently
update the text, the fallback would already be preresolved for
whatever script this is. If it does not support the updated text,
we would then see boxes, even if the requested font actually would
have supported it.
The fix is simply to do an additional pass if NoFontMerging is set
and we were not able to match with the specified script. Since
the same family might be available in different foundries, with
different writing system support, we still want to do a pass first
to see if we can match the exact script of the text.
Note that QRawFont::fromFont() exploited the bug by using
NoFontMerging for getting the fallback font for a specific
writing system. To keep this working without having to rewrite
fromFont() and risk introducing regressions, we add an argument
to make the findFont() function behave as before. It isn't
super-pretty, but since it is private API it is hopefully fine.
[ChangeLog][QtGui][Text] Fixed an issue with NoFontMerging and
changing font families dynamically, where boxes would be seen in
place of the correct text.
Pick-to: 5.15 6.1 6.2
Done-with: Andy Shaw
Fixes: QTBUG-81770
Change-Id: Ide9a36d7528a1040172c5864fa99e7a82eac4e83
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Remove SRCDIR defines from tests that don't use them. There is a
standard define called QT_TESTCASE_SOURCEDIR that is available to all
tests and serves the same purpose.
Pick-to: 6.2
Change-Id: I2aa237739c011495e31641cca525dc0eeef3c870
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
Replace custom SRCDIR define with QT_TESTCASE_SOURCEDIR. The latter is
automatically available to all tests to use and serves the same purpose
but is not terminated by a slash.
Change-Id: I62896d0fd84ac63ac1b74a459ec1646c6bde0a46
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Previous fix hit too widely so some valid horizontal and vertical
lines were affected; the root problem being that such lines have an
empty control point rect (width or height is 0). Fix by caculating in
the pen width.
Pick-to: 6.2 6.1 5.15
Change-Id: I7a436e873f6d485028f6759d0e2c6456f07eebdc
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The QtTest best practices documentations recommends using output
mechanisms such as qDebug() and qWarning() for diagnostic messages,
and this is also what most of our own tests do.
The QWARN() macro and corresponding internal QTest::qWarn() function
was added when QtTest was first implemented, but was likely meant as
an internal implementation detail, like its cousin QTestLog::info(),
which does not have any corresponding macro.
This theory is backed by our own QtTest self-test (tst_silent)
describing the output from QWARN() as "an internal testlib warning".
The only difference between QWARN() and qWarning(), besides the much
richer feature set of the latter, is that qWarning() will not pass
on file and line number information in release mode, but QWARN() will.
This is an acceptable loss of functionality, considering that the user
can override this behavior by defining QT_MESSAGELOGCONTEXT.
[ChangeLog][QtTest] QWARN() has been deprecated in favor of qWarning()
Pick-to: 6.2
Change-Id: I5a2431ce48c47392244560dd520953b9fc735c85
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
One is a bad application or library in this case, but nonetheless
we should handle this more gracefully then just crashing due to
the QRhi already having been destroyed. Mainly because in Qt 5 one
could get away with the same: releasing OpenGL objects underneath,
for example, a QSGPlainTexture with no (or wrong) GL context did
not generate any user visible fatal errors. So we should not crash
in Qt 6 either with these code bases.
In debug builds or when QT_RHI_LEAK_CHECK is set, one will get the
unreleased resources warning printed in Qt 6, which is a step
forward compared to Qt 5. So there is still some indication that
something is badly designed, even if the application survives.
Task-number: QTBUG-95394
Pick-to: 6.2
Change-Id: I944f4f425ff126e7363a82aff926b280ccf1dfc3
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
layoutAboutToBeChanged must be called before
persistentIndexList as the user might create persistent indexes
as a response to the signal
Fixes: QTBUG-93466
Pick-to: 6.2 5.15
Change-Id: I73c24501f536ef9b6092c3374821497f0a8f0de4
Reviewed-by: David Faure <david.faure@kdab.com>
When saving to a QIODevice, QImage and QImageWriter will automatically
deduct the file format from the filename if it determines that the
device is a QFile. That did not work for a QSaveFile device. Fix by
using the common ancestor, QFileDevice, in the implementation.
Fixes: QTBUG-89022
Pick-to: 6.2
Change-Id: Ie01d80df4f29ca0d4ff30bf7e1b77605293c070e
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
... instead of raw pointers or QSharedPointer.
Raw pointers are, of course, a no-no in modern code. In particular,
when the result is then held in shared_ptr or QSharedPointer,
make_shared or QSharedPointer::create() should be used to reduce
number of memory allocations.
Since this is private API, we're free to use std::shared_ptr, which
does only half the atomic operations on copies, compared to
QSharedPointer, so is more efficient.
For either make_shared or QSharedPointer::create(), we need to work
around the private ctor, which we do by inheriting a member-function
local class from QColorTrcLut and make_shared'ing that. As a
member-function-local class, it has access to the otherwise private
parts of QColorTrcLut, including its default constructor. As a public
subclass, shared_ptr has no problem performing the derived-to-base
pointer adjustment in the return statement. This way, we can use
make_shared even though our target's class' ctor is private.
Change-Id: Icb11249b54cd5e544e692f6a0bf1f9dda1710454
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
... by making the test class a friend of the CUT, as we do elsewhere
for the same reason.
This allows to remove the duplicated enum and struct in favor of using
The Real Thing™, which means the test can no longer go out of sync
with the CUT anymore.
Change-Id: I87dc8bb4a5476ae4fc99e006c4690e96d2f530d2
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Fixes compiler warnings:
warning: implicit capture of ‘this’ via ‘[=]’ is deprecated in C++20 [-Wdeprecated]
Change-Id: Ia7cf50f491e92f39162c69afb2a8320afedba056
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Makes it able to catch the last bug of saturating color values above a
certain value.
Change-Id: Ib2a3918623a1defe2981efe61cf8118e019e9d4b
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
We need those events to trigger palette color group changes in QQuickItem
without having to connect every item to yet another QWindow signal.
Task-number: QTBUG-93752
Pick-to: 6.2
Change-Id: I8534808cdaab828e5876f8fda31567aeb1b4272a
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Handy when one has the data buffer to be read in a QBAV.
This also fixes an issue and compiler warning about passing a
qsizetype data length value as an int, and makes it possible to pass
a qsizetype-size length without going through QByteArray.
Makes the QByteArray overload redundant.
Change-Id: Iba8825cf0fd8003fb2eac5b1d30a61ec91b85ceb
Reviewed-by: Giuseppe D'Angelo <giuseppe.dangelo@kdab.com>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
When rotating M_PI_2 based on x-axis, quaternion to euler conversion
makes NaN for the x-rotation value. This patch fixes this corner case.
Fixes: QTBUG-93600
Pick-to: 6.1 6.0 5.15
Change-Id: Ice321a80ad90dba9cf3ee3a14ec7d3d047c21bd3
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Supported on OpenGL (and ES) 3.0+ and everywhere else.
Can also be a render target, targeting a single slice at a time.
Can be mipmapped, cannot be multisample.
Reading back a given slice from a 3D texture is left as a future
exercise, for now it is documented to be not supported.
Upload is going to be limited to one slice in one upload entry,
just like we specify one face or one miplevel for cubemap and
mipmapped textures.
This also involves some welcome hardening of how texture subresources
are described internally: as we no longer can count on a layer index
between 0..5 (as is the case with cubemaps), simply arrays with
MAX_LAYER==6 are no longer sufficient. Switch to sufficiently dynamic
data structures where applicable.
On Vulkan rendering to a slice needs Vulkan 1.1 (and 1.1 enabled on the
VkInstance).
Task-number: QTBUG-89703
Change-Id: Ide6c20124ec9201d94ffc339dd479cd1ece777b0
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Add NEON for RGB32 and RGBA64 writeback, and SSE2 for
RGBA64 writeback.
Change-Id: Id9ee803267a78f5bdff5beaa719e7a59c1dbb9fb
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Useful for some HDR representations and HDR rendering.
Change-Id: If6e8a661faa3d2afdf17b6ed4d8ff5c5b2aeb30e
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The existing conversions weren't handling gamma correctly and used
an ad-hoc definition of gray instead of based on true luminance.
[ChangeLog][QtGui] RGB conversions to grayscale formats are now
gamma-corrected and produce color-space luminance values
Change-Id: I88ab870c8f5e502ddb053e6a14a75102239a26f2
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
In QFileSystemModel, in some cases the hostname in a UNC path is
converted to lower case and stored in the root node's visibleChildren.
When QFileSystemModel sets the UNC path as the root path, it tries to
get the row number for the host, but it didn't convert the hostname to
lower case before getting the row number, which resulted in the host
not found in the root node's visible children. As a result, it returns
-1, an invalid row number. Change the behavior to find the node for the
host using the host name case-insensitive and then get the row number.
Fixes: QTBUG-71701
Pick-to: 5.15 6.0 6.1
Change-Id: Ib95c7b6d2bc22fd82f2789b7004b6fc82dfcb13b
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Alex Blasche <alexander.blasche@qt.io>
Normally we only allow creating wrappers for texture objects. These
can then be used with a QRhiTextureRenderTarget to allow rendering into
an externally created texture.
With OpenGL (ES), there are additional, special cases, especially on
embedded. Consider EGLImages for example. An EGLImageKHR can be bound to
a renderbuffer object (glEGLImageTargetRenderbufferStorageOES), which
can then be associated with a framebuffer object to allow rendering into
the external buffer represented by the EGLImage. To implement the same
via QRhi one needs a way to create a wrapping QRhiRenderBuffer for the
native OpenGL renderbuffer object.
Here we add a createFrom() to QRhiRenderBuffer, while providing a dummy,
default implementation. The only real implementation is in the OpenGL
backend, which simply takes a renderbuffer id, without taking ownership.
Task-number: QTBUG-92116
Change-Id: I4e68e665fb35a7d7803b7780db901c8bed5740e2
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
takeItem and takeChild do not signal the change correctly to the
external world, this change fixes the problem
Fixes: QTBUG-89145
Pick-to: 6.1 5.15
Change-Id: Ib4844ace53007068a2cd62eba64df99e6e45fdc0
Reviewed-by: David Faure <david.faure@kdab.com>
from qt/qtx11extras 0e67fb41cfc4b4bfbaa7dc75f8ddebdf5a08e836.
The plan is to expose these as native interfaces, so this is a first
step.
Task-number: QTBUG-83251
Change-Id: Iecba8db9a4f616a08a3750ddaae08cc30ec66f89
Reviewed-by: Liang Qi <liang.qi@qt.io>
Most nested block elements are merged together, so while we shouldn't
do real inheritance we need to do it when block elements are combined.
Pick-to: 6.1
Fixes: QTBUG-91236
Change-Id: I9e37b15f705db92c79a620d0d772f25d0ee72b8d
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
When we are having nested lists then we need to ensure that the HTML is
outputted correctly so that the closing list and item tags are placed
in the right order.
[ChangeLog][QtGui][QTextDocument] The output of toHtml() now handles
nested lists correctly.
Fixes: QTBUG-88374
Pick-to: 6.1 5.15
Change-Id: I88afba0f897aeef78d4835a3124097fe6fd4d55e
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
This unit test is related to the parent commit.
Html export used to omit the text-decoration for the default font,
this unit test ensures that this property is added to the exported
html.
Fixes: QTBUG-91171
Change-Id: Ib68bec27f9963cdcac5c553b2c07557717b1c22e
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
It used to be ignored because we couldn't disable it, but that works
fine now. So re-enable it.
Fixes: QTBUG-91171
Change-Id: I4cf966211bb200b73326e90fc7e4c4d3d4090511
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Currently, we test at 1x, 2x, and mixed typical desktop
DPI values. Add android DPI values, with scale factors
in the 2.5 - 3.75 range.
This test currently uses 96 as the base DPI (and so
does the Android platform plugin), so we normalize
the values to use that base DPI.
Change-Id: I25b66f5e16d37c01758d5623b805e4141247a74a
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Test the name=factor format and various incorrect spec
strings. We expect that the screen DPI is used if the
scale factor specification is incorrect.
Change-Id: Ia990e70cf71e370dd2bb4b1047a101dfe9e59cb0
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
This reverts commit 40330b8f0a.
It was a bad idea to use QFlatMap here, because it is a sorted map, but
we need to keep the passive grabbers in the same order as the grabs happened.
So need to go back to an earlier version of the patch that uses two parallel QLists.
Pick-to: 6.1
Change-Id: I9e6013c2565986fe1eb9fd754f8259766f83bee5
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
QHighDpiScaling has two init/update functions:
- initHighDpiScaling(): called once during QGuiApplication construction
- updateHighDpiScaling(): called whenever (relevant) screen configuration changes
Currently the calls to updateHighDpiScaling() are made from
multiple places including platform code. Simplify by calling
it from two locations:
- QWindowSystemInterface::handleScreenAdded()
- QGuiApplicationPrivate::processScreenLogicalDotsPerInchChange()
Replace comment about early calls to qt_defaultDpi with a
test which calls qt_defaultDpiX/Y with no screens attached.
(Looking at the qt_defaultDpiX() implementation, it is unlikely
that there will be a problem as long as updateHighDpiScaling()
is called before QGuiApplication::primaryScreen() starts returning
a non-null value.)
Change-Id: I447db42894617495843a5cb531a1322b000fed62
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
In Qt Quick we now need to keep track of which QQDeliveryAgent is
responsible when a point is grabbed, either passively or exclusively.
When we re-deliver to that grabber, we need to do it via the same agent,
so that the same scene transform is used, and the grabber will see the
event in the correct coordinate system. It's easier to track this
mapping here instead of in a separate map in Qt Quick.
Pick-to: 6.1
Task-number: QTBUG-92944
Change-Id: I69f769c694d0da24885cdf4087e5032022bff629
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Those tests don't fail anymore and show in CI as BPASS, so we
can safely, hopefully, unblock them
Task-number: QTBUG-87429
Fixes: QTBUG-68974
Fixes: QTBUG-69166
Fixes: QTBUG-87403
Fixes: QTBUG-87411
Fixes: QTBUG-69083
Fixes: QTBUG-69084
Fixes: QTBUG-87426
Pick-to: 6.1
Change-Id: I831b955116c0f465319b9c5fc726dd98804d1c00
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Add rounding one place, and skip addFile for now since
the assumption about rounding dpr up no longer applies.
Pick-to: 6.1
Change-Id: I0a84dfabb218acf42cb3816ba50ef899c8762523
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
QVectorND, QQuaternion, and QColor all operate on floats rather than
qreal or double, so explicit use float literals in the tests.
Pick-to: 6.1
Change-Id: If12cc12ddd9cd8219f3d78bf24e1400921e26c2b
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
376e3bd8ec added the new class for Qt 6.1,
but during header review we concluded that using a class introduces
complexity wrt instance ownership and API design that can be avoided by
using a std::function instead.
The functionality is tied to QTextDocument, so the type definition and
the default provider API is added there.
Since std::function is not trivially copyable, the atomicity of the
previous implementation is not maintained, and concurrent modifications
of and access to the global default provider from multiple threads is
not allowed. The relevant use case can be supported by implementing a
resource provider that is thread safe.
Task-number: QTBUG-90211
Fixes: QTBUG-92208
Pick-to: 6.1
Change-Id: I39215c5e51c7bd27f1dd29e1d9d908aecf754fb7
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
While the class name is now a bit more than a mouthful, it's purpose
is very narrowly tied to QTextDocument, so don't use a very generic
name for it. That resources are provided based on a URL is to some
degree an implementation detail, and URLs are resource locators so
we don't need that in the class name.
Address code review comment for 6.1. Add documentation and links to
existing APIs with a similar purpose.
Task-number: QTBUG-90211
Task-number: QTBUG-92208
Pick-to: 6.1
Change-Id: I4f09057cc2f53a5595513c1c9422e6ccaad6ca13
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
fillRule() contained a major blunder: instead of checking if the
d-pointer was allocated, and return a default value if it wasn't,
it checked whether the path contained any points. This means that
QPainterPath p;
p.setFillRule(x);
Q_ASSERT(p.fillRule() == x);
was failing.
As a drive-by to test this change, fix another mistake in clear():
clear is documented to clear the elements in a path, but instead
it also changed the fill rule.
This commit partially reverses 697910e5fb.
Change-Id: Ieb8145694b672439c3380d9ccb87d1206a2dd115
Pick-to: 5.12 5.15 6.0 6.1
Done-with: Milian Wolff
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
It was treated differently depending on format, made it consistently
behave the same for all formats (following the behavior of the primary
formats).
Pick-to: 6.1 6.0 5.15
Change-Id: Ie24e19957d076fdf3ebd333074e26ede187489eb
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Test that setting QT_USE_PHYSICAL_DPI uses physical
DPI instead of logical DPI.
Change-Id: I7f89cf1af5e013454cc3d8ec3559f2719514fea3
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Add auto-tests for QT_SCALE_FACTOR and QT_SCREEN_SCALE_FACTORS
Change-Id: I57bffa266be910f2ba26cb1a870e09ae202fcae0
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
The tst_qwindow test failed with a warning that programmatically
moving the mouse cursor is not possible with Wayland.
Task-number: QTBUG-91418
Change-Id: I02ceb2af43fbc83a4e6ae09718315f5f79ff8285
Reviewed-by: Liang Qi <liang.qi@qt.io>
There was a race condition in the test, since the window
might be exposed before the event to activate the
application has been received. And the short cut is not
triggered before the application is active, which
means it could just be discarded and the window would
never be closed.
This happened consistently when testing on Wayland.
Task-number: QTBUG-91418
Change-Id: I40cb143985175f5f2b5405e9502a48475c93074a
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
This test depends on XCB, but is only protected by a build-time
flag, so it will be executed as long as XCB is available at
build-time. Do as with the offscreen backend and just skip it
when a different platform plugin is in use.
Task-number: QTBUG-91418
Change-Id: Ida076dc81d0740af2cec164bd40ca10d16345f05
Reviewed-by: Paul Olav Tvete <paul.tvete@qt.io>
Since Qt 5.5, brush textures are stored as QImages. If the texture has
been set as a QPixmap, the conversion to QImage may change its pixel
format, depending on the native system format. That is acceptable.
Fixes: QTBUG-69193
Task-number: QTBUG-91418
Change-Id: Ic4dbeaa552b1f2183774a011e38414855a9dc4b1
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Following patterns from the other backends is insufficient with OpenGL
because we do not use real uniform buffers. There is currently a
possibility that a shader program will be bound without following it
with setting uniforms. Correct this by having a second level of tracking
of the associated srb object in the pipelines.
Pick-to: 6.0 6.1
Fixes: QTBUG-91630
Change-Id: I74a012daade826dd22c436bde06381c1233bad11
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
This function returns the size in device independent
pixels, and should be used when calculating user
interface sizes.
Change-Id: I528123f962595a3da42438ca560289a29aca4917
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
A way to read the description of the profile from ICC, or set one
yourself.
Change-Id: I68622e30ee209cac99c41f3df934712c3548c0de
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@qt.io>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
When a foreign event loop that does not enter an alertable wait state
is running (which is also the case when a native dialog window is
modal), pipe handlers would freeze temporarily due to their APC
callbacks not being invoked.
We address this problem by moving the I/O callbacks to the Windows
thread pool, and only posting completion events to the main loop
from there. That makes the actual I/O completely independent from
any main loop, while the signal delivery works also with foreign
loops (because Qt event delivery uses Windows messages, which foreign
loops typically handle correctly).
As a nice side effect, performance (and in particular scalability)
is improved.
Several other approaches have been tried:
1) Using QWinEventNotifier was about a quarter slower and scaled much
worse. Additionally, it also required a rather egregious hack to
handle the (pathological) case of a single thread talking to both
ends of a QLocalSocket synchronously.
2) Queuing APCs from the thread pool to the main thread and also
posting wake-up events to its event loop, and handling I/O on the
main thread; this performed roughly like this solution, but scaled
half as well, and the separate wake-up path was still deemed hacky.
3) Only posting wake-up events to the main thread from the thread pool,
and still handling I/O on the main thread; this still performed
comparably to 2), and the pathological case was not handled at all.
4) Using this approach for reads and that of 3) for writes was slightly
faster with big amounts of data, but scaled slightly worse, and the
diverging implementations were deemed not desirable.
Fixes: QTBUG-64443
Change-Id: I66443c3021d6ba98639a214c3e768be97d2cf14b
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Avoid painting errors with dpr < 1, also for the PassThrough
mode.
This limits the minimum high-dpi scale factor to 1,
for the code path which determines the scale factor
based on screen DPI.
Pick-to: 6.1
Task-number: QTBUG-89948
Change-Id: I14b3f130f0ae141d5f05c87437f926a9f76d1dec
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
After QPoint(F), it's now the time of QSize(F) and QVectorND,
which can be unambiguously decomposed.
[ChangeLog][QtCore][QSize] QSize is now usable in a structured
binding declaration.
[ChangeLog][QtCore][QSizeF] QSizeF is now usable in a structured
binding declaration.
[ChangeLog][QtGui][QVector2D] QVector2D is now usable in a
structured binding declaration.
[ChangeLog][QtGui][QVector3D] QVector3D is now usable in a
structured binding declaration.
[ChangeLog][QtGui][QVector4D] QVector4D is now usable in a
structured binding declaration.
Change-Id: I67bb152f4210f2be27607179cd2ec522174cc483
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Only RGB444 and RGB666 were treated slighlty different from the rest,
but the test had a few additional mistakes.
Pick-to: 6.1 6.0 5.15
Change-Id: I4728b4036affedfffce8bca5c1e7be3869344fbe
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
When changing transferfunction the look-up-tables needs to be
regenerated.
Pick-to: 6.1 6.0 5.15
Change-Id: I83ca5fe570f85d478a374f52c0a82db84e70c3b8
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
The emulation detection has been usable only on qtbase tests, move it to
QTest so that it can be used in other modules as well.
Pick-to: 6.1
Change-Id: I4b2321b7856414d7b1cfd5e6b1405a633c6bb878
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
A few formats were not treating the input QColor correctly. Fixed and
added more exhaustive test.
Pick-to: 6.1 6.0 5.15
Change-Id: I872aeeb45e518f9a34b4ac35642264821f9927f2
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Calculate the effective width of the hyphen better, and compare with
ceiled sizes.
Pick-to: 6.1 6.0
Fixes: QTBUG-90698
Change-Id: I7ed2eb44c54240ecb2f8a38e5acf1f32608b2bfb
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
Different font was used when running on QEMU ARMv7 and the second page
was never reached.
Pick-to: 6.1
Task-number: QTQAINFRA-4127
Change-Id: Ic85b76661cf3642b69e6e1b21e8062d7c36231e3
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
As described in 3279c8e7d7, we can't
depend on the widths of decoration to always be the same for
drawText() and equivalent drawStaticText/drawGlyphRun.
This is typically visible as an off-by-one when using the default
fonts on OpenSUSE.
Since this test was actually made to test positions of RTL glyphs,
we can just disable the decoration and simplify the text.
Fixes: QTBUG-89086
Change-Id: I139fe3e1c5e98d8b1d7e0e7c19645fd4717d1d95
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
This was added by 9ff76c27b9 on
the basis that it signifies a shaping error and would later assert
or crash.
But the line is easily reachable by user code. If Harfbuzz returns
0 glyphs, it just means it is unable to shape the string, for instance
if the input string only contains default ignorables (like a ZWJ)
and does not have any appropriate glyph to use for replacement.
Qt expects there to always be at least one glyph in the output
(num_glyphs == 0 is used to indicate shaping is not yet done), so
to avoid asserts later on, we simply populate the output with a
single 0 token, which is a required entry in the font that is
reserved for representing unrepresentable characters.
This also adds a test and therefore a zero-width joiner to the test
font to reproduce the issue.
[ChangeLog][QtGui][Text] Fixed a possible crash with certain fonts
when shaping strings consisting only of control characters.
Fixes: QTBUG-89155
Pick-to: 5.15
Pick-to: 6.0
Change-Id: Ia0dd6a04844c9be90dcab6c464bebe339a3dab11
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
With the updated QEMU and toolchain, these tests now pass.
Change-Id: Icb74562a0e6422cd4564f63db991aa431e0e3119
Reviewed-by: Assam Boudjelthia <assam.boudjelthia@qt.io>
Make use of the device pixel ratio in the QIcon paint method so the @nx
hi-dpi pixmaps are selected when appropriate when painting to a
QPainter.
Pick-to: 6.0
Fixes: QTBUG-90042
Change-Id: I53995a2285ef879e3c4fddb9f8da702e256a260f
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
Initialize the offscreen platform plugin with no screens,
create QGuiApplication object.
Not much of the high-dpi related Qt API can be used
in this configuration, but at least Qt should not crash
on startup.
Task-number: QTBUG-71034
Change-Id: I6620843c3bd8b692c5c2419b1ba290e16175ba5b
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Add QRhi APIs to retrieve and reload the contents of the "pipeline
cache".
The only API where there is a true pipeline cache is object is Vulkan
(VkPipelineCache). For OpenGL, the other backend where we support this,
it is simulated with program binaries. The Qt 5 style OpenGL program
binary disk cache continues to work like before, but one has now the
option to do things in a more modern, graphics API agnostic way, that
leads to generating a single blob instead of a large set of files in
some system location, allowing easier "pre-baking" of the cache content.
It is expected that Qt Quick exposes the two new functions in form
if QSG_RHI_ environment variables, thus allowing easy testing and
cache file generation.
As an example for the performance improvements this can give, consider
Vulkan, where we do not have any existing persistent caching mechanism
in place:
Running BenchmarkDemoQt6.exe --scene flythrough --mode demo creates 18
QRhiGraphicsPipeline objects from Qt Quick and Qt Quick 3D.
The total time spent in QRhiGraphicsPipeline::create() during application
startup for these 18 pipelines is 35-40 ms on a given Windows (NVIDIA)
system.
When exporting the pipeline cache contents to a file, and then, in a
subsequent run, reloading the cache contents, this is reduced to 5-7 ms
on the same system, meaning we get a 6-7x improvement.
The generated data is always specific to a given Qt version, RHI
backend, graphics device, and driver version. Much of the implementation
consists of adding and verifying the appropriate header to the blobs
retrieved from the driver, to allow gracefully ignoring data that was
generated with a device or driver that differs from the one used at
run time. This should provide robustness, even if the Vulkan or OpenGL
implementation is for some reason not prepared to identity and reject
incompatible cache/program blobs.
Fixes: QTBUG-90398
Change-Id: I67b197f393562434f372c7b7377f638abab85cb3
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
...when the platform does not support Vulkan. The version is left
at the default 0 then, so checking for >= 1.0 is wrong.
This allows the test to pass with the offscreen platform plugin.
Change-Id: I5afba8f1e703e4fa0ff41da91d18f5fabfb54868
Reviewed-by: Andreas Buhr <andreas.buhr@qt.io>
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
This also needs improvements to qvkgen. What we get with this patch
are the Vulkan 1.1 and 1.2 core API's additional 11 instance-level
and 30 device-level commands present in QVulkanFunctions and
QVulkanDeviceFunctions.
All of these are attempted to be resolved upon construction. When the
implementation does not return a valid function pointer for some of them
(e.g. because it is a Vulkan 1.0 instance or physical device), calling
the corresponding wrapper functions will lead to unspecified behavior.
This is in line with how QOpenGLExtraFunctions works. The simple
autotest added to exercise some Vulkan 1.1 APIs demonstrates this in
action.
The member functions in the generated qvulkan(device)functions header
and source files are ifdefed by VK_VERSION_1_{0,1,2}. This is essential
because otherwise a Qt build made on a system with Vulkan 1.2
headers would cause compilation breaks in application build environments
with Vulkan 1.0/1.1 headers when including qvulkanfunctions.h (due to
missing the 1.1/1.2 types and constants, some of which are used in the
function prototypes). In practice this should be alright - the only
caveat to keep in mind is that the Qt builds meant to be distributed
to a wide variety of systems need to be made with a sufficiently new
version of the Vulkan headers installed, just to ensure that the
1.1 and 1.2 wrapper functions are compiled into the Qt libraries.
Task-number: QTBUG-90219
Change-Id: I48360a8a2e915d2709fe82993f65e99b2ccd5d53
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Instead, have a static function in QRhiVulkanInitParams then Qt Quick
and anyone else who creates a QVulkanInstance that is then used in
combination with QRhi can query.
Change-Id: I046e0d84541fc00f5487a7527c97be262221527f
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
...as described in the Vulkan >= 1.1 spec. One can now call
supportedApiVersion() (before create(), similarly to the other
supported* functions) to determine the available Vulkan
(instance-level) version.
Fixes: QTBUG-90333
Change-Id: Ibe8482402b7f07e4abc48c88252ff0365e4e2faa
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
QGuiApplicationPrivate::processMouseEvent() sends a
QWindowSystemInterfacePrivate::TouchEvent if the mouse event is not
accepted and AA_SynthesizeTouchForUnhandledMouseEvents is enabled.
A QPA TouchEvent always contains native touch points, which is why
it calls QWindowSystemInterfacePrivate::fromNativeTouchPoints to
translate the QMouseEvent's device-independent position back to the
raw position that it would have had if it came from a real touchscreen.
Therefore we must give that function touchpoints that are actually in
native coordinates.
It may be that some of this transformation could be avoided entirely,
but here we prove that the existing way works correctly, by adding
coordinate checking to the tst_QWindow::mouseToTouchTranslation() test.
Pick-to: 6.0
Task-number: QTBUG-86165
Change-Id: I4c9ca2b11e9eb76d79712c187db3eb9865da581a
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Android and Wasm do not build the offscreen platform
plugin (see src/plugins/platforms/CMakeLists.txt).
Skip building the tst_qhighdpi test as well in this
case. Remove the BLACKLIST entry.
Task-number: QTBUG-88505
Change-Id: I172198c8c24759b14f73ad07260c449fc6ab893f
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
From QRhi's perspective this consists of two things:
- A shader with samplerExternalOES in it cannot go through the standard
pipeline. Rather, a QShader with suitable GLSL code in it has to be
constructed manually. As this is something useful as an autotest
anyway, add a test case to the qshader autotest that demonstrates
this.
- When it comes to correctly calling glBindTexture, add a QRhiTexture
flag. The expectation is that an OpenGL-only client sets this in
combination with QRhiTexture::createFrom(), thus wrapping an existing
texture that then gets bound to the GL_TEXTURE_EXTERNAL_OES target
instead of our usual GL_TEXTURE_2D.
For completeness we also add a SamplerExternalOES variable type to
QShaderDescription, but the sampler type is not actually used by the
QRhi OpenGL backend, as it is the QRhiTexture that defines the
texture target.
Change-Id: I36b52325deb3703b59186ee3d726d0c3015bfc4b
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
...to the extent it is sensible. We have to make compromises still,
meaning some fields will only be applicable with certain APIs.
Most of this is already shown upon QRhi::create() as info debug
prints, when enabled. Now expose it all through the QRhi API as
well.
This is useful for printing in qtdiag, and, while it should be
avoided as much as possible, to make decisions about disabling
3D rendering features depending on the driver and GPU in use.
Change-Id: Iebe1e192965c928b82a094d1c7c50ddf4b38b9a2
Reviewed-by: Andy Nichols <andy.nichols@qt.io>
Those serve no purpose anymore, now that the .pro files are gone.
Task-number: QTBUG-88742
Change-Id: I39943327b8c9871785b58e9973e4e7602371793e
Reviewed-by: Cristian Adam <cristian.adam@qt.io>
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
QTextDocument and the text editor classes suggest to override
their loadResource() methods to provide data associated with
a text document. This approach has the following drawbacks:
- it requires subclassing
- there is no way to set a global resource provider
- QLabel is missing virtual loadResource() method and
it can't be added without breaking ABI
QUrlResourceProvider is designed to solve these issues.
One should create a derived class that implements
QUrlResourceProvider::resource(). The objects of the derived
class then can be set for any text document.
The default resource provider can be set with
QUrlResourceProvider::setDefaultProvider().
This change also adds QLabel::setResourceProvider(),
which doesn't break ABI.
[ChangeLog][QtGui][Text] Introduced QUrlResourceProvider that allows to
load resources for HTML. It is intended to replace the use of
QTextDocument::loadResource().
Change-Id: Iaf19b229f522a73508f20715257450fe58f68daf
Reviewed-by: Konstantin Ritt <ritt.ks@gmail.com>
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
With the introduction of QKeyCombination, the result of |'ing together
a set of modifiers and a key goes always through the same QKeySequence
constructor, no matter the order.
The implicit conversion through int when the wrong order is used
causes a compiler warning as that conversion is deprecated. So remove
that test case.
Pick-to: 6.0
Change-Id: I04e27bcd51723ee0efc77e52e45ca3eb8bac5fc7
Reviewed-by: Mitch Curtis <mitch.curtis@qt.io>
Most tests fail when running on QEMU ARMv7, but not on target HW or
QEMU ARM64.
Task-number: QTBUG-89819
Change-Id: I686268c200cce1a44a717b80c2970f608be44636
Reviewed-by: Shawn Rutledge <shawn.rutledge@qt.io>
Remove the qmake project files for most of Qt.
Leave the qmake project files for examples, because we still test those
in the CI to ensure qmake does not regress.
Also leave the qmake project files for utils and other minor parts that
lack CMake project files.
Task-number: QTBUG-88742
Change-Id: I6cdf059e6204816f617f9624f3ea9822703f73cc
Reviewed-by: Edward Welbourne <edward.welbourne@qt.io>
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Kai Koehne <kai.koehne@qt.io>
Blacklist qfont tests that don't work correctly with qemu.
Task-number: QTQAINFRA-3836
Change-Id: I7f5d4b07428febb0adb82d38203226b5c56a2ad5
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@qt.io>
Complete search and replace of QtTest and QtTest/QtTest with QTest, as
QtTest includes the whole module. Replace all such instances with
correct header includes. See Jira task for more discussion.
Fixes: QTBUG-88831
Change-Id: I981cfae18a1cabcabcabee376016b086d9d01f44
Pick-to: 6.0
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Apparently some library definitions went overboard, link them directly.
Pick-to: 6.0
Change-Id: I009737f7e3edff5619241b700a627dc4e25e6018
Reviewed-by: Joerg Bornemann <joerg.bornemann@qt.io>
This is the most basic way to represent custom transfer functions.
Change-Id: I529fb647ece82c03e85ef77b056d9daf13fe5a61
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
Reviewed-by: Eirik Aavitsland <eirik.aavitsland@qt.io>
QColors were not premultiplied before being set.
Pick-to: 6.0 5.15 5.12
Change-Id: Id3765b6932a72374ddfd788fae4bb628a4edf0b7
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
If the first font in the families list happens to have been
disambiguated because of duplicates, two things went wrong:
1. hasFamily() would return false for the font family, because
it does not disambiguate when checking for the family name and
only checks if the families list contains the exact string.
2. Adding aliases to the full disambiguated string is not supported,
only the family name.
The first issue has been reported separately as QTBUG-89068.
The test failure is fixed by just avoiding the fonts that
are ambiguous in the test, as it really doesn't matter which
font we pick.
Fixes: QTBUG-89008
Pick-to: 5.15 6.0
Change-Id: I829778c2e7bb6090475c34dcf9cdce58862729d6
Reviewed-by: Liang Qi <liang.qi@qt.io>
This patch disables four failing unit tests when executed with the
offscreen backend.
Change-Id: Ie67341b886984e6de19cd8dd8a8a237a620a1b7a
Reviewed-by: Fabian Kosmale <fabian.kosmale@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
Reviewed-by: Laszlo Agocs <laszlo.agocs@qt.io>
The former also does fuzzy comparison, but it reports what the values
were, if the test ever fails.
Change-Id: I36ecda1f69bf3f430c904b37cd8c3a23201ab7e2
Reviewed-by: Mårten Nordheim <marten.nordheim@qt.io>
Reviewed-by: Andrei Golubev <andrei.golubev@qt.io>
QTextCharFormat::fontFamily is deprecated in favor of fontFamilies,
which returns a QStringList wrapped in a QVariant, whereas the setter
expects a QStringList.
Change-Id: I3333eaae4fc5ec3e3bdbec58047d6b3554b4a171
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Make the string into a list and call setFontFamilies.
Pick-to: 6.0
Change-Id: I1b70db784fd6e495b48917141d07bacd1e883882
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
Not testing the result of the copying, just verifying that it doesn't
assert.
Pick-to: 6.0
Change-Id: Ib51129134b74c17eada7e3819ccfff10bb9affbf
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@qt.io>
The QFont::fromString() needs to differ between strings
produced before and after Qt 6.0 when interpreting the
weight value, since in older strings this will be the legacy
scale.
Luckily the number of tokens in the string can be used for this
purpose, since many tokens were added in Qt 6.0.
This broke KDE, where font settings are stored in QSettings
and serialized using QFont::toString() from Qt 5.
Fixes: QTBUG-88589
Pick-to: 6.0.0 6.0
Change-Id: I199737fed61917f8b9d8f86176ead29a89eb8e0c
Reviewed-by: Andy Shaw <andy.shaw@qt.io>
By depending on setFamilies() then we can be sure that font names with
spaces, commas, quotes and so on are correctly handled without being
misinterpreted. For now it will split on the comma when a string
containing one is passed to setFamily. But from Qt 6.2 this will be
removed to preserve the family string as a convenience function.
[ChangeLog][QtGui][QFont] Indicated that setFamilies/families is
preferred over setFamily/family to ensure that font family names are
preserved when spaces, commas and so on are used in the name.
Change-Id: Id3c1a4e827756a4c928fed461a4aafa5a0f06633
Reviewed-by: Qt CI Bot <qt_ci_bot@qt-project.org>
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@qt.io>
This reverts commit ee122077b0.
Reason for revert: This causes QProcess::readAll() to sometimes
return nothing after the process has ended.
Fixes: QTBUG-88624
Change-Id: I34fa27ae7fb38cc7c3a1e8eb2fdae2a5775584c2
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Reviewed-by: Paul Wicking <paul.wicking@qt.io>
(cherry picked from commit 23100ee61e33680d20f934dcbc96b57e8da29bf9)
Reviewed-by: Qt Cherry-pick Bot <cherrypick_bot@qt-project.org>
Ensure the values are reasonable regardless of screen DPI. Velocity
is supposed to be in logical pixels / second.
Task-number: QTBUG-88252
Task-number: QTBUG-88346
Change-Id: Ic209887f8ed0381c033a9ff04ae48b072c444df4
Reviewed-by: Morten Johan Sørvig <morten.sorvig@qt.io>
A QWindow created without an explicit geometry needs to pick up
a default geometry in the platform plugin. If the window has a
maximized of fullscreen window state, it will fill the entire
available geometry of the parent window (or the screen if there's
not parent window).
Fixes: QTBUG-69159
Fixes: QTBUG-69156
Fixes: QTBUG-69154
Pick-to: 5.15
Change-Id: If8565d92a97bb4b3fa44757e68969d54d0bc7ebe
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
When a foreign event loop that does not enter an alertable wait state
is running (which is also the case when a native dialog window is
modal), pipe handlers would freeze temporarily due to their APC
callbacks not being invoked.
We address this problem by moving the I/O callbacks to the Windows
thread pool, and only posting completion events to the main loop
from there. That makes the actual I/O completely independent from
any main loop, while the signal delivery works also with foreign
loops (because Qt event delivery uses Windows messages, which foreign
loops typically handle correctly).
As a nice side effect, performance (and in particular scalability)
is improved.
Several other approaches have been tried:
1) Using QWinEventNotifier was about a quarter slower and scaled much
worse. Additionally, it also required a rather egregious hack to
handle the (pathological) case of a single thread talking to both
ends of a QLocalSocket synchronously.
2) Queuing APCs from the thread pool to the main thread and also
posting wake-up events to its event loop, and handling I/O on the
main thread; this performed roughly like this solution , but scaled
half as well, and the separate wake-up path was still deemed hacky.
3) Only posting wake-up events to the main thread from the thread pool,
and still handling I/O on the main thread; this still performed
comparably to 2), and the pathological case was not handled at all.
4) Using this approach for reads and that of 3) for writes was slightly
faster with big amounts of data, but scaled slightly worse, and the
diverging implementations were deemed not desirable.
Fixes: QTBUG-64443
Change-Id: I1cd87c07db39f3b46a2683ce236d7eb67b5be549
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Tests in tst_qhighdpi are crashing on Android.
Task-number: QTBUG-88505
Task-number: QTBUG-87025
Change-Id: Ie1350e06fb30d90f20c550f91555f4023eee56b6
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
These tests are failing with "java.lang.UnsatisfiedLinkError: dlopen
failed: invalid ELF file" at the start, excluding them now to enable
Android testing until they're fixed later.
Task-number: QTBUG-87671
Task-number: QTBUG-87025
Change-Id: Ida7d7158fccdc31df1f9689f77fde832964d732f
Reviewed-by: Alexandru Croitor <alexandru.croitor@qt.io>
QChar should not be convertible from any integral type except from
char16_t, short and possibly char (since it's a direct superset).
David provided the perfect example:
if (str == 123) { ~~~ }
compiles, with 123 implicitly converted to QChar (str == "123"
was meant instead). But similarly one can construct other
scenarios where QString(123) gets accidentally used (instead of
QString::number(123)), like QString s; s += 123;.
Add a macro to revert to the implicit constructors, for backwards
compatibility.
The breaks are mostly in tests that "abuse" of integers (arithmetic,
etc.). Maybe it's time for user-defined literals for QChar/QString,
but that is left for another commit.
[ChangeLog][Potentially Source-Incompatible Changes][QChar] QChar
constructors from integral types are now by default explicit.
It is recommended to use explicit conversions, QLatin1Char,
QChar::fromUcs4 instead of implicit conversions. The old behavior
can be restored by defining the QT_IMPLICIT_QCHAR_CONSTRUCTION
macro.
Change-Id: I6175f6ab9bcf1956f6f97ab0c9d9d5aaf777296d
Reviewed-by: Volker Hilsheimer <volker.hilsheimer@qt.io>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
It's unnecessary, and copying QEvents is a bad practice since it's a
polymorphic class.
Change-Id: Ieb6de106084f838c5e6c8a0643c54fd3c7f4a7a8
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The dot product used rows instead of columns.
Pick-to: 5.15 5.12
Fixes: QTBUG-87984
Change-Id: I922f67ed0fa9a4f88aa4e9fc6d3c09f8dda21688
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
The logic in qgrayraster was ready for it except for an intermediate
format. qrasterizer.cpp and qcosmeticstroker.cpp uses a dot-16 fixed
point format, and had to be changed to handle higher coordinates on
64-bit architectures.
Fixes: QTBUG-84428
Change-Id: I85ab7a04e38bd0dbcefa9f16c16ccc84785a33cf
Reviewed-by: Lars Knoll <lars.knoll@qt.io>
Bring QPixmapIconEngine on par with QIconLoaderEngine
when it comes to @Nx pixmap handling: Make the scale
factor a test parameter during icon lookup.
This allows storing e.g 16x16@1, 16x16@2, 16x16@3 versions
of a pixmap in the icon, and then having QIcon select
the correct one based on the target devicePixelRatio.
Extend the qiconhighdpi test to also cover QPixmapIconEngine,
via the addPixmap() API.
The corner cases of pixmap lookup can be much complicated.
QIconLoaderEngine and QPixmapIconEngine should ideally
have identical behavior in order to avoid surprises.
Change-Id: I17552cc61755bff9553c4a462e3983ac6759c13b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@qt.io>
