Introduce flags for the renderer type and move code to
qwindowsopengltester. Introduce
QWindowsOpenGLTester::supportedGlesRenderers() where type-dependent
checking can be added.
Change-Id: I4bbffaf861cb0fdbea0919e081e3626fb5a872de
Task-number: QTBUG-43263
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
Compile qwindowsopengltester on all platforms and add struct
GpuDescription with detection method based on IDirect3D9 (dynamically
loaded).
Expose as a QVariantMap-property to QWindowsNativeInterface to be
able to access it from qtdiag.
Task-number: QTBUG-43263
Change-Id: I3c6cd0bbbe36465e0e05f7064ecfc943d6ea4101
Reviewed-by: Laszlo Agocs <laszlo.agocs@theqtcompany.com>
Bump copyright year in tool output and user visible strings to 2015.
Change-Id: I9b29907fe3f555e78005cb296a49d92f601fb7ec
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Martin Smith <martin.smith@digia.com>
Wheel events should not cause a popup widget parented on a scrollable
widget to be closed or moved to correctly reflect the system behavior
on OS X and Windows.
Task-number: QTBUG-42731
Task-number: QTBUG-40656
Change-Id: I4ef75aa8331390309c251316ac76db2cf9ec51f7
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
Unfortunately the few functions that are part of the OpenGL ES 3.0
standard and are used by QtGui have to have special handling after all.
Just directly calling the functions causes issues when building on a
GLES3 capable system and deploying somewhere where only GLES2 is available.
Using eglGetProcAddress and such is not an option because the ES spec does
not guarantee that standard functions are resolvable via that mechanism.
Task-number: QTBUG-43318
Change-Id: I72f985d75ca669835839016573cbb8e4a3fb41db
Reviewed-by: Jørgen Lind <jorgen.lind@theqtcompany.com>
Using QDBusInterface causes introspection, which may not be permitted
by some platforms.
Change-Id: I953d27b9c0fc7c21d52fefeb8c7760a7235aed9d
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
QVersionNumber will gain a small-version-number optimization, which
stores sequences of less than 4 (32bit) or 8 (64bit) 8-bit signed
segments inside the class instead of a QVector. Make sure the tests
cover those cases, too.
Change-Id: If1d875c75d284908756b305f767a7218cab5226f
Reviewed-by: Keith Gardner <kreios4004@gmail.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
xcb_image_destroy() calls free on m_xcb_image
and then few lines down we access member of
m_xcb_image. Swap order of these two actions.
Change-Id: I01fb43a066459cce462df6af22161c35cef524eb
Task-number: QTBUG-43623
Reviewed-by: Shawn Rutledge <shawn.rutledge@digia.com>
The extra ';' causes a warning when gcc is used with -Wpedantic.
Change-Id: I3d99aca6f160e46dbe2173106160474664e06b2c
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
if the CTFontDescriptorRef is already contained in m_systemFontDescriptors
we leak a reference, unless we explicitly release it.
Change-Id: I5b263aa52b4433e7e28cc01164098892cc9cd2ae
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
QCoreTextFontDatabase::m_systemFontDescriptors owns the references to the
underlying CTFontDescriptorRef objects. in order to avoid a leak, we should
release them
Change-Id: I8fc6c158908e0173696cd91058ac34efb3de01d5
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
Hiding the statusbar using the normal iOS APIs result in QScreen
reporting new availableGeometry, which is not what we want. The
scroll of the screen is a purely visual effect, and shouldn't
have any effect on observable Qt APIs besides the keyboard rect
changing.
Instead of actually hiding the statusbar, we achieve the same
effect by raising the key window (and any other application
windows, including the keyboard) to the level of the statusbar,
effectively putting them above the statusbar. This still leaves
popups and alert windows above the key window, as normal.
Change-Id: Ib7694240ca86cfb9000de35bf0c49343ffb37e32
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
The documentation for CFURLCreateDataAndPropertiesFromResource()
does not make this clear but from looking at the CFNetwork implementation
and a user stacktrace it appears that this function can return true
but not set the data argument under certain circumstances.
Change-Id: I48034a640d6f47a51cd5883bbafacad4bcbd0415
Task-number: QTBUG-36787
Patch-By: Robert Knight
Reviewed-by: Markus Goetz <markus@woboq.com>
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
This commit checks whether CFURLCreateWithString() succeeded.
It does not appear to be possible to enter an empty URL directly in the
PAC configuration dialog but I can't rule out the possibility
that it could find its way into the settings via some other means.
Change-Id: I6c2053d385503bf0330f5ae9fb1ec36a473d425d
Patch-By: Robert Knight
Task-number: QTBUG-36787
Reviewed-by: Markus Goetz <markus@woboq.com>
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
macQueryInternal() was retrieving the PAC URL string as-entered by
the user in the 'Proxies' tab of the system network settings dialog
and passing it to CFURLCreateWithString().
CFURLCreateWithString() returns null if the input string contains
non-URL legal chars or is empty.
Change-Id: I9166d0433a62c7b2274b5435a7dea0a16997d10e
Patch-By: Robert Knight
Task-number: QTBUG-36787
Reviewed-by: Peter Hartmann <phartmann@blackberry.com>
Reviewed-by: Markus Goetz <markus@woboq.com>
The non client mouse events have the right information regarding the
modifiers now so the old code covered with Q_WS_WIN can be removed.
Change-Id: I3e4ebc0debdd66970b18233f189b5d9e880e40a9
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
With the -load_all option turned on then it will cause a problem with
the network bearer plugins as they share the same files and on OS X
two plugins will be built and potentially linked against when building
statically.
This only effects gcc builds because clang does not turn this option on
when linking by default either.
Task-number: QTBUG-39238
Change-Id: Ib259304c3da74b6b4f6fcc6e3766427303af3bbe
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@theqtcompany.com>
The change 35bc3dc45a moved some padding out
of QTextureGlyphCache into the font engines directly, however this was not
done for the DirectWrite font engine so it caused a buffer overrun.
Task-number: QTBUG-41782
Change-Id: I4e643159036f06c5edd8a742dc6694d517a47826
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
The warning was triggered when increasing the fixed size of a window.
If there is a real violation of the size constraints, the below
warning will show.
Task-number: QTBUG-43420
Change-Id: I85d7d0a91d040aa3ddeff8c3d105351efd5e14a9
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
The capture needs to be cleared when for example a modal dialog
is opened from a timer slot or similar while moving the window.
Task-number: QTBUG-43308
Change-Id: Id0c01080d67d1057004a7f85b037dce5e220de42
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
First, try to determine the version of kernel32.dll by
using the version API. If that fails, loop using the
version macros, taking the major version into account.
Hangs in the minor version loop have been observed, potentially
related to the major version.
Task-number: QTBUG-43413
Change-Id: I982e78873510e7598c7cf839177e59812acd86f6
Reviewed-by: Joerg Bornemann <joerg.bornemann@theqtcompany.com>
There's a change in Qt 5.4.0 that makes Qt compile with its own set of
D-Bus headers, which means QT_CFLAGS_DBUS may be empty. Thus, we can't
compile or link if we're using the actual libdbus-1 API to build the
test.
This commit makes these unit tests use the same dynamic loading
mechanism.
Change-Id: I56b2a7320086ef88793f6552cb54ca6224010451
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
Commit a2da88712f was incomplete. Though
it did enable building of QtDBus without the libdbus-1 headers, but it
still kept looking for it. We don't need to do it anymore if CFG_DBUS is
the default (runtime), so skip the actual check.
This commit does not change behavior. All it does is skip the D-Bus
tests if we're about to use dlopen'ed libdbus-1.
Change-Id: I3947443c9ef6cc409cb6b154564f8af6fb5de84e
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>
When CFG_DBUS != "no", we enable the build of linuxaccessibility in
src/platformsupport, which requires QT += dbus to work. When no dbus
headers are found, CFG_DBUS is set to runtime, which means we'll
enable a11y but "dbus" will not end up in qconfig.pri and therefore
src/dbus is not built at all (and not before platformsupport). Therefore
the build in platformsupport breaks.
So even if CFG_DBUS is set to "runtime" we need to make sure that dbus appears
in qconfig.pri.
Task-number: QTBUG-43205
Change-Id: Ibbe5e66552226cdcc1ce16fb83556406f3bb0e09
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
MM stands for month, SS is invalid
mostly cherry picked from Qt4 commit 670f460fab6a386407c07281cf6417ccf6430970.
Task-number: QTBUG-12236
Change-Id: I7af4be655d2d10f1befa1366abb48225c60d31dc
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
If the constructor is inline, the generated code needs access to the
vtable, which gets emitted with the first virtual function (in QtGui),
but somehow icl.exe can't find it in debug. Looking at the .obj files it
generates and comparing to MSVC, it seems that:
- both generate and export the inline constructor from Qt5Guid.dll
- MSVC will call that constructor from qoffscreenintegration.obj
- icl.exe will inline the constructor and requires a symbol not
exported from Qt5Guid.dll
I can't explain why (probably a compiler bug).
Change-Id: I0ab9c078ae4fc794826025d68d364124c7247e80
Reviewed-by: Jørgen Lind <jorgen.lind@theqtcompany.com>
Give it version number 3.5 for current compatibility.
Change-Id: Ia023d29b3b3946f8642a0550279ae63cbb803fc5
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
We're fairly confident self won't change in that case, and the
assert was causing warnings in release builds.
Change-Id: I4a826579bb4cedef8423e8d43cb370e1f3b80407
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@theqtcompany.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@theqtcompany.com>
The error of "Not connected".
This incidentally solves a crash when QDBusServer().lastError() is
called but libdbus-1 couldn't be found.
Change-Id: Id93f447d00c0aa6660d4528c4bbce5998d9186a8
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
On the unit test side, everything is sequential: we first ask for the
connection, verify that it is connected, then ask the remote side via
the session bus if it is connected. Unfortunately, the remote site may
handle things in a different order: it may handle the incoming function
call to "isConnected" before doing accept(2) on the listening socket.
So, instead, make the local side block until the connection is received
on the other side. On the remote, we don't block, instead we use the
feature of delayed replies.
Change-Id: Ie386938b8b39dd94a9d7e5913668125fb4a3c7da
Reviewed-by: Alex Blasche <alexander.blasche@theqtcompany.com>
The bug noted in d88e4edcd5 appears to be
resolved.
Change-Id: Id20906ff83f74bd16267d44bf447626b81187e71
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
qlocale_p.h(427): error #68: integer conversion resulted in a change of sign
We hadn't enabled Q_COMPILER_CONSTEXPR for ICC.
Change-Id: Ie7e3070b9f8f2cf512d2745001312865e698596b
Reviewed-by: Olivier Goffart <ogoffart@woboq.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Currently you could only invoke windeployqt for debug and release
builds, but not windeployqt_clean resulting in artifacts after
the clean step.
Change-Id: I3a93e4909a017f3594cc5b0c2249ed25b777c008
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Reviewed-by: Andrew Knight <qt@panimo.net>
Skip the tests that require building and deploying an external
command line application, since that's not how we do things on
Android, and it's really not very relevant for that platform.
Change-Id: I2c1985687e25fb0cf124b1d57c8ba60e37d2ff96
Reviewed-by: BogDan Vatra <bogdan@kde.org>
On Android the POSIX implementation of QCollator is used, and
this does not support setting other locales than the default.
Change-Id: I25d23949341fc555e8be4f6836ae68cc8813cc46
Reviewed-by: BogDan Vatra <bogdan@kde.org>
Include test data in qrc so it can be found on Android.
Change-Id: Iaca8422120f1ef842aafeb0cc209cb9fdd70f05f
Reviewed-by: BogDan Vatra <bogdan@kde.org>
Bundle test data in qrc on Android. Extract it, as the tests
expect to find it in the file system.
Change-Id: I251eca3c23141a608b1cbac5ee0b7164c068f9b4
Reviewed-by: BogDan Vatra <bogdan@kde.org>
The failures will be printed in red color.
Use -f param to stop on fail.
Change-Id: Ife58f9264a9ac859d739842c6d1359acde807ce7
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@theqtcompany.com>
The orientation is unsigned short, read it as such. In
JPEG-files created by Ricoh/Pentax cameras, the data is saved in
Motorola format. Reading the wrong data size will produce invalid
values when converting the byte order.
Change-Id: I8f7c5dc5bfc10c02e090d3654aaefa047229a962
Task-number: QTBUG-43563
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Microsoft's SetCapture() doesn't work on windows owned by other processes,
so instead we use a timer. This is the same approach as used by qttools/src/pixeltool.
The mouse move approach however is more elegant and doesn't hammer the CPU with
QCursor::pos() calls when idle. For this reason the workaround is Q_OS_WIN only.
Task-number: QTBUG-34538
Change-Id: I40a6f7df5bf2a3a29ade8fe4a92f5b5c4ece7efb
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Linux gracefully allows us to do that and treat the v6 socket as if it
were v4. Other OS (notably OS X) aren't so forgiving.
Change-Id: I13dd3274be2a4b13e8b1eef93cbc2dd17b648f96
Reviewed-by: Richard J. Moore <rich@kde.org>
Instead of leaking the QLockFile instance, which causes
leak-checkers to emit false positives, simply call exit(),
which doesn't run the destructors, yet doesn't lead to
leak-checker warnings.
Change-Id: Ia61010671e5218ae412e2bcf873e66255a2c5a99
Reviewed-by: David Faure <david.faure@kdab.com>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
QtMetaTypePrivate::QAssociativeIterableImpl::{find,begin,end}() allocate a new _iterator,
so when they're used outside of the ref-counted world of QAssociativeIterable::const_iterator,
their lifetime needs to be manually managed.
Instead of going to that length, which failed in previous iterations of this patch, implement
value() in terms of (new) find() and let find() operate on const_iterator.
Because of forwards compatibility between patch releases, use (unexported) friend functions
for now with the intention to make them proper member functions come Qt 5.5.
Task-number: QTBUG-41469
Change-Id: I43b21eae0c2fc4c182369e669a8b3b457be68885
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
