Although never used, the d member triggers all sorts of warnings
when copying a QTransform around because it's technically
undefined behavior (reading from an uninitialized variable).
Change-Id: If06b6bea6f0ec0623c38ba330d46958b373cdc65
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
For some reason it seems to be supported to call moveToThread(0).
That call will allocate a new QThreadData for the object. However,
if we then detect that we're calling moveToThread from a thread
which is not the one the QObject has affinity with,
we error out leaking that QThreadData object.
Change-Id: I0fe6625a2a9887535e457f3897b514d2a03d1480
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
An early return in case of errors leaked memory tracked in a variable
in scope.
Change-Id: I68cd77890608caff54df7476d38850e5541ce76e
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@digia.com>
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
The QClipboard::Mode returned from modeForAtom should be checked
everywhere because values greater than Selection (i.e. FindBuffer)
aren't supported on X and should mean error conditions.
The lack of such a check did an out-of-bounds array access, which
could lead to a crash.
Change-Id: I70f70b5f713ab2f892e258d4df2f7afeb434f0c1
Reviewed-by: Uli Schlachter <psychon@znc.in>
Reviewed-by: Gatis Paeglis <gatis.paeglis@digia.com>
An early return caused a leak of a new'd allocated object.
Change-Id: I9fbc37238dd49066d24363a2e8ee8bf35b155301
Reviewed-by: Uli Schlachter <psychon@znc.in>
Reviewed-by: Allan Sandfeld Jensen <allan.jensen@digia.com>
This bug can be reproduced (AFAIK) only on 10.9. To fix it I suggest we create
NSOpenPanel/NSSavePanel
_every_ time it must be displayed. Actually, that's what I've seen in all code samples
I was able to found - nobody tries to retain this panel and re-use it.
If we re-use it, "Media" section magically disappears.
I believe this bug is not Qt's bug, but something weird in Cocoa.
Task-number: QTBUG-40655
Change-Id: Ic0e76e0a9a5444a76f336d511c0ff93f9fd05797
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
When ordering a key window out Cocoa
tries to find a new KEY window. Looks like it prefers the current MAIN
window and since QNSPanel is never a main window, Cocoa is breaking
the stack order. To avoid this - try to change the key
window BEFORE ordering out a window.
The application has a stack of all open windows (visible and hidden),
we iterate through this stack starting from our current key window
and look for the nearest window below, that can become a new key window.
Most probably, it will be our transient parent :)
This code will change (potentially) the key window _only_
if there is a transient parent.
Task-number: QTBUG-39809
Change-Id: I96b630799341875fc7e38dabf1ff6416338e687b
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
A regression was introduced by bdebec4e2e.
The intention of the change was to avoid using Qt's shortcut mechanism
to trigger menu items which were already triggered through the regular
menu API in Cocoa. However, Cocoa has trouble with key equivalents that
do not have any keyboard modifiers. Thus, we have to allow these
particular key sequences to go through the regular system. I've verified
that the original bug is still fixed with this change.
[ChangeLog][OS X] Fixed menu item shortcuts without keyboard
modifiers.
Task-number: QTBUG-41192
Change-Id: I8f5a9cbc7a448b3cb0519baed95be5cbb630205c
Reviewed-by: Gabriel de Dietrich <gabriel.dedietrich@digia.com>
Deleting a QWindow automatically deletes its child windows because
they are in the QObject hierarchy. However, if the user sets both
WA_NativeWindow and WA_DontCreateNativeAncestors, we can't just
delete that widget's QWindow. First because the widget doesn't get
notified (and maybe it should be), and then because we may invalidate
any reference to the QWindow the user may have kept.
Our solution is to reparent the child QWindows into the new parent's
closest QWindow. We must, however, take the precaution of not keeping
any reference to the backing store in the platform window. Reparenting
operations can trigger repaints on the platform window, but the backing
store is not set and flushed until later.
Task-number: QTBUG-38377
Change-Id: I353f5528f227a227b6d10419367cbe1d5d07a94e
Reviewed-by: Jørgen Lind <jorgen.lind@digia.com>
socket(2) is allowed to return 0, so 0 should not be included
when checking for errors.
Change-Id: I0454ea60347d90078d3ab3046969add8d5c37935
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
device is private, always null and class has no friends, so no need to have it at all
Change-Id: I320d47f1a712a3202c08b494563533e29d185501
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
Reviewed-by: Richard J. Moore <rich@kde.org>
Connect to QScreen::availableGeometryChanged().
Task-number: QTBUG-32567
Change-Id: I2097d80faa83ae062f7e149122fba26d23432e95
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
1cdcf64ad5 recently introduced a rendering
bug whereby certain clips would be handled incorrectly.
Change-Id: I3f486819c66b1d665243c8dc1e9d077dd2f64f25
Reviewed-by: Andrew Knight <andrew.knight@digia.com>
This only applies to QTreeView.
8eb3d724a9 introduced this error.
Change-Id: Ia8a2c387afbd19e4d98ea6f81e5ce6409d79bcd9
Reviewed-by: Thorbjørn Lund Martsum <tmartsum@gmail.com>
The symptoms were made apparent in the xmlpatterns command line
utility when trying to use the synchronous HTTP code path in
QXmlQuery for fetching schemas.
Change-Id: I93b283fdec4b501a5c1fc646f7ddc30d8407f5ae
Reviewed-by: Markus Goetz <markus@woboq.com>
Reviewed-by: Jocelyn Turcotte <jocelyn.turcotte@digia.com>
We need to have a finer grained control over the tests
we skip in our CI system. This adds a blacklisting
mechanism that allows blacklisting individual test
functions (or even test data) using a set of predefined
matching keys for the operating system and some other
relevant variables.
QTestlib will search for a file called BLACKLIST in the test
directory and parse it if found. The file contains a simple
ini style list of functions to blacklist. For details see
qtestblacklist.cpp.
Change-Id: Id3fae4b264ca99970cbf9f45bfb85fa75c1fd823
Reviewed-by: Lars Knoll <lars.knoll@digia.com>
When a platform menu is used then it would hard code the icon size to
16x16. Instead of using the hard coded value then PM_SmallIconSize should
be used instead.
Change-Id: I27540ebc4397501e8f57686a118c28cd7167c0a1
Reviewed-by: Morten Johan Sørvig <morten.sorvig@digia.com>
If creating an asset catalog from Xcode, Xcode will
add it to the "Copy Bundle Reources" phase, if it exists.
Since we don't always generate that phase, Xcode will
silently fail with the result that the asset catalog will
not take effect (no icon, launch images etc).
This patch will ensure that we always create the phase
(like native Xcode project does), which will fix the
problem.
Change-Id: Ief949d63543977f1021db992e0c41714d898e68b
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
The code calls QLibraryInfoPrivate::findConfiguration() to get a
new QSettings object but was not deleting it.
Change-Id: I207a7ff55f87aff91e2898a99e9cac06d57c5f7d
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Instead of coupling the visibility of the virtual keyboard to
the first-responder status of the currently active QUIView, we
now treat first-responder as a separate state, tied directly
to QWindow activation. This fits better with the concept of
first-responders in iOS, as a UIView can become first-responder
without dealing with text input, eg when dealing with touch
events or menu actions.
The decision point on whether or not to show the virtual
keyboard is then handled by implementing the conformsToProtocol
method and selectively returning YES for the UIKeyInput protocol.
iOS internally calls _requiresKeyboardWhenFirstResponder on the
UIResponder to determine this, but since we can't override a
private method (like WKContentView in WebKit does) we have to
rely on the fact that the implementation of the method uses the
protocol conformance to make its decision.
Once the virtual keyboard is up, we then need to react to changes
to its configuration, such as keyboard type or the type of return
key. Normally this would be a simple call to [view reloadInputViews],
but iOS will not reload the built-in keyboards unless the UIResponder
returns YES for _requiresKeyboardResetOnReload. Since we again can't
override this private method (like WebKit does), we work around it
by taking advantage of the fact that iOS will treat any change to
the first-responder as a reason to do a keyboard reset. By using
a stand-alone UIResponder for text input we can init and destroy
these responders as needed, so that every call to reloadInputViews
will trigger a reset, as the responder has not been seen before.
We keep track of changes to the input-method-query, and detect
whether or not we need to bring up a new UIResponder for text
handling.
As part of this refactoring we now tie the visibility of the
virtual keyboard to the presence of a focus object that has
input-methods enabled. This means that we automatically will
track changes to input-elements through the focus changes,
and reconfigure or hide the keyboard as appropriate. As a
result the hide() method of QInputMethod becomes a no-op on
iOS.
Change-Id: I4c4834df490bc8b0bac32aeedbd819780bd5aaba
Reviewed-by: Richard Moe Gustavsen <richard.gustavsen@digia.com>
In the list of default implementations, the raster ops added in
ae0ddb8c72 were all offset by one
composition mode because of a duplicate entry in the array. The
effect would be, e.g. that using the NotDestination operator would
resolve to the Set operator instead.
Most users will probably not have experienced this since any of
the asm-based functions will be preferred.
[ChangeLog][Painting] Fixed some very rare cases of mismatched
raster modes in QPainter.
Change-Id: Ia242b54c78acbe1c89d9b4ecd10936564ec134b2
Task-number: QTBUG-41413
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
The role may changed based on the checkable state of the button, eg, so
we need to resolve the role at runtime instead of hard-coding it in the
constructor.
Change-Id: I78faee08189c5510ca9964b07ad94bcf5d4fa11b
Reviewed-by: Frederik Gladhorn <frederik.gladhorn@digia.com>
Synthesized mouse events should not cause mouse events which
look like they were obtained from the system.
So set the source of generated events from the original event.
Change-Id: I862829446ac6ef664e1b8e4a5b54ed11926a1d4b
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
Mouse events synthesized from touch events by Qt
should be marked as Qt::MouseEventSynthesizedByQt.
Change-Id: I73612621a0248440b3b773f1280395c05c55e4aa
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
A window width constraint coded in Qt4.8 was accidentally applied
to the height in Qt5. Upon further review, it does not seem that
this constraint is needed, in any case. Different versions of
Windows have different minimum window widths (8.1 had 124px
instead of 112), and setting a smaller value seems to cause no
harm.
Task-number: QTBUG-32820
Change-Id: I21ad6d406abf7344aff54d32b41974265aa9ea81
Reviewed-by: Jan Arve Sæther <jan-arve.saether@digia.com>
When a window's screen changes it may recreate the platform window.
In that case, update the winId in the widget to keep it in sync.
Task-number: QTBUG-40681
Change-Id: Iec815320214832bb63952de3a5bd1340a04dacd4
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>
With VS2013 Update 3, Win32 sockets are now allowed in Windows Store
Apps. Upgrading VS meant that gethostname was visible to the application,
but failed to link as the mkspec doesn't link to ws2_32. Adjust the
workaround not to call the newly visible symbol on WinRT.
Change-Id: Ide6d8759cca7acab6c466a9bf4d6b876f6ca7605
Reviewed-by: Tony Sarajärvi <tony.sarajarvi@digia.com>
Reviewed-by: Oliver Wolff <oliver.wolff@digia.com>
Some IMEs will perform an insertNewLine when Return/Enter is pressed while
composing text as well as causing the edit to finish. By handling this it
will ensure that the extra enter/return event is sent when the IME
requests it.
Task-id: QTBUG-39125
Change-Id: Ice6eded68e6b1dc51703a38316f76f78099923da
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
If QRawFont and and drawGlyphRun is used on a QPaintBuffer it will lose
the QRawFont and end up painting with primary font at the time.
With this patch, QStaticTextItem can now indicate that they must be
drawn using the supplied font-engine and that the font information is
not enough.
Change-Id: Id6bd376d797d2bfb457e7de55c48bdcf9f20ae38
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
Applications that do not override paintGL() (may happen in some test code)
will not perform any GL rendering, not even clearing. This is fine, but
to be safe we need to do a clear right after creating the FBO in order to
prevent showing garbage.
Task-number: QTBUG-38327
Change-Id: If062901bb18724f961e41856085470e37b49abbe
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
GetGlyphOutline Windows API returns wrong values when used with an
OpenType PS font and in GGO_NATIVE mode. It causes problem when
exporting to PDF. The fix changes the GetGlyphOutline call to use
GGO_METRICS instead.
Task-number: QTBUG-12799
Change-Id: I47d6d16b6e7819b51bc444420ada4a47d5f24f4e
Reviewed-by: Eskil Abrahamsen Blomfeldt <eskil.abrahamsen-blomfeldt@digia.com>
qatomic_sparc.h was removed previously as part of general cleanup of
old atomic code for Qt 5.3. Unfortunately SPARC include reference was
not removed resulting in build failure on that platform.
Task-number: QTBUG-41384
Change-Id: Ic6e31b32324b0e5dd3700a6a21515a8eea5668bd
Reviewed-by: Thiago Macieira <thiago.macieira@intel.com>
The fallbacks on the platform should ideally contain all fonts that
support the script passed in, but this would require populating the
font database and checking the unicode ranges for all fonts, so it
would cause a significant performance hit on Mac. What we do here
instead is just return a set of default fonts as the fallbacks
and disregard the requested script.
The consequence of this is that some special unicode codepoints were
not supported on Mac, because we weren't working with a full fallback
list.
To rectify this without breaking performance, we always add Arial
Unicode MS to the end of the fallback list as a final fallback.
This should always be present on the system and has a wide support
of different scripts.
[ChangeLog][OS X][Fonts] Fixed missing glyph box shown in place of some
uncommon Unicode code points.
Change-Id: I4fc8576bfddc8a73204aca2b16437d42c524bc79
Task-number: QTBUG-40986
Task-number: QTBUG-40549
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>
This is a very useful tool to test the behavior of a given platform
when it comes to rendering on three contexts to three window surfaces
from the gui thread and calling swapBuffers for each.
Change-Id: If3abd055d0dee7cfb24098484326aa24261556bc
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
Otherwise it is impossible to set a swap interval different
than the one set by QSurfaceFormat::setDefaultFormat().
Both windows and xcb will pick up the updated interval from the
window on the next frame.
Change-Id: I55a59f83a62d3adcea687adf28639646b576ed58
Reviewed-by: Paul Olav Tvete <paul.tvete@digia.com>
The QPixmap(const char* const*) ctor featured prominently in the callgrind
trace of tst_qmdi*, with 23% of total time spent there in tst_qmdiarea
before the change.
Cache the results in the QPixmapCache. That's probably a good idea for all
standardPixmap()s, but none other feature prominently in any of the
widgets/widgets auto-tests, so there's no immediate need to do something
about it.
After the change, less than 3.5% of the total time is spent on parsing
XPMs.
Change-Id: Idfb6ffe0d0f7a4a1f71a7c26fc9ab0f42bdbd7a8
Reviewed-by: Gunnar Sletta <gunnar@sletta.org>
The only way I was able to find information on this was through bug
reports.
Change-Id: Iac59a82fab9c216495860ad3b1efad1125130002
Reviewed-by: Andy Shaw <andy.shaw@digia.com>
Reviewed-by: Marc Mutz <marc.mutz@kdab.com>
